View
5
Download
0
Category
Preview:
Citation preview
Co
ntrib
utin
g to
yo
ur g
loba
l success
Co
ntrib
utin
g to
yo
ur g
loba
l success
Mergenthalerallee 79-81 65760 Eschborn, GermanyTel : +49-6196-776-14-20 Fax : +49-6196-776-14-19
sales-smt@djkeurope.comwww.djkeurope.comEmail:
DJK Europe GmbH
DJK Europe GmbH
DJK Europe GmbH
Automatic Nozzle Cleaner
Green equipment cleans only with water and air
Automatic Nozzle Cleaner
Specifications
Compressed air
Cleaning water
Diameters of connections
Input power supply
Weight
Type
Pressure
Reguired volume
Type
Reservoir capacity
Reguired volume
Compressed air supply port
Cleaning fluid drain
Reservoir drain
Voltage
Plug
Cable length
Power consumption
Equipment weight
Clean air
Purified water for industrial use
Nose nipple Rc1/4
Plug Rc1/8
AC100V/AC230V/50/60 Hz
European type ( with earth)
2 m
130 W
34 kg (when 500 cc of cleaning water is in the reservoir)
0.45-0.5 MPa
180 L/min. ( A.N.R)
500 cc
240 cc/h
Requiredfluids
HIGH COUPLER socket 30SM ( plug on equipment side: 30PF)
Dimensions
601
552
44
4 (64
7)
Signalleuchte (optional) (598)
396
351
Oberes Limit
Unteres Limit
Pick-up rate improvement
Quality improvement
Reliability improvement
Mounting efficiency improvement
Longer nozzle service life
Pick-up error reduction
Recognition error reduction
Benefits of use
Cleaning time:3 minutes
You can see the cleaning power!
Damage to pick-up nozzles caused by cleaning is minimized. Black coating is not peeled off.
With great cleaning power, the MAC-III succeeds where the conventional cleaning method (ultrasonic cleaning) fails, removing solder that has adhered to nozzle surfaces and dirt that has adhered to nozzle openings.
Twin nozzles Easy-to-operate,automatic cleaning
Compatible with various nozzles
Uniform cleaning quality can be achieved by
anyone, regardless of skill.
Easy to operate with touch panel
Optional nozzle holders compatible with
nozzles of variousmounter manufacturers
Recommended