View
2
Download
0
Category
Preview:
Citation preview
Arc (MMA) & TIG Welders 880 747 - 749Arc Welder Accessories & Spares 885 749 - 750Arc Welding Electrodes 888 761Clothing 885 758Curtains 885 756Fluids 885 756Gas Torches 860 746Gas Welding & Cutting 885 754 - 755
Gloves 885 759
Helmets 885 757
MIG Welder Accessories & Spares 885 752
MIG Wire 887 759 - 760
MIG/MAG Welders 880 751 - 752
TIG Welder Accessories & Spares 885 750
TIG Welding Rods 891 760 -761
Description Group Page Description Group Page
745
Product Groups 860 - 891
Product Grading
Professional Industrial tooling that has enhanced features and benefits demanded by craftsmen and professional users.
MaintenanceProducts designed for general maintenance ofmachines, workshops, garages and some household applications.
ProductionHigh performance industrial tooling designed forcontinuous use applications on machine tools whererepeatability and long tool life are of critical importance.
Industrial Designed for regular use in industrial applications.Manufactured to stringent quality levels andinternational standards.
WorkshopStandard quality tooling for use by tradesmen and generally industrial use.
Home Improver DIY quality tooling. Designed for home use and light industrial applications.
Contents
Welding
OS19_RSA_UNP_745_OS 17/04/2019 17:07 Page 1
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019746
WELDING
GAS TORCHESGROUP
860
Butane Soldering ToolPIEZO self ignition. Uses standard butane lighter fuel and is simple torefill. Fully adjustable tip temperature control with a safety fuel cut-off when cap is replaced. Textured anti-slip barrel with built in stand foranti roll. Supplied with pointed soldering tip. Can be used with doubleflat, hotair, flame and hot knife, can also be used as a blow torch.Supplied without fuel.
Product Weight Order CodeNumber each KEN-516BS075 100g -9100K
Power rating: 50WSoldering temperature 375°CRun time 60 minutesOverall length with cap: 195mmOverall length with soldering tip: 180mm
Type Weight Order Codeeach SEN-516
4-In-1 Soldering Kit 467g -2040K
Butane Micro Soldering Tool
Cordless and refillable. Uses standard butane lighter fuel. 120W rating. Working temperature range up to 1,300°C. Lightweight,windproof flame, ideal for outdoors. Easily removed nozzle forcleaning or replacement. Can be used for shrinking heat seal plastic tubing. Light duty soldering. Craft projects. Thawing frozenlocks. Includes one refillable fuel cartridge.
Weight Order Codeeach SEN-516105g -2000K
4-In-1 Butane Torch KitThis excellent soldering kit represents exceptional value for moneyand contains: Butane soldering tool complete with 2.4mm solderingtip, hot knife tip, hot air tip and flame tip. Protective cap with pocketclip. Stand and sponge. Applications: soldering circuit boards, craft projects, thawing frozen locks, shrinking heat seal plastic tubing and cauterising rope.The needle and 2.4mm soldering tip must be used in conjunctionwith the interchangeable tip holder.
Butane Soldering Tool Kit
BSK125Butane soldering iron complete with 5 tip attachments, cleaning sponge and safety stand.Kit contents: 1x butane soldering iron. 5x tip attachments: 2.4mmand 4.8mm double flat, hot knife, hot air blower and hot air deflector. 1x cleaning sponge, 1x safety stand.
Weight Order Codeeach KEN-516460g -9320K
Group 516
8PIECES
OS19_RSA_UNP_746_OS19_RSA_UNP_746.qxd 17/04/2019 17:07 Page 1
WELDING
ARC (MMA) & TIG WELDERSGROUP
880
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019 747
Lynx™ EAW-140 ACMMA Welder
A portable 230V single phase arc welder suitable for use with rutile electrodes of 1.6 - 3.2mm diameter. Capable of welding mild steel up to 6mm. Featuring a stepless regulator for infinite variable control of the welding current with low currentfacility for effective welding of thinner materials. Highly efficient transformer maximises potential. Safety features include thermal overloadprotection and turbo fan cooling - enables the ability to weld at greater power for longer periods. Provides full portability, ease of use andconvenience and superb value. Operates from a 230V 13 amp standard domestic socket. Heavy duty casing. Two year warranty. Supplied complete with accessories, integrated carrying handle and 2m mains cable. Conforms to TUV-GS, GOST, EMC, LVD and all relevantCE requirements. Insulation class H. Protection degree IP21.
Contents:• LynxTM AC power supply.• 1.8m primary cable, 10mm2.• 1.8m earth cable and 150A clamp.• Hand held face shield with51 x 107mm glass.
• Scratch brush and slag remover.• Instruction manual.
Input voltage: 230V, 50/60Hz.Fuse rating: 13A.Phase: 1.Power consumption: 2.5kW.Output current range: 40A - 140A.Open circuit voltage: 50V.Dimensions (L x W x H): 270 x 250 x 310mm.
Cheetah™ EAW-160 AC MMA WelderA portable 230V single phase arc welder suitable for use with rutile electrodes of 2 - 4mm diameter. Capable of welding mild steel up to 8mm. featuring a steplessregulator for infinite variable control of the welding current. Highly efficient transformermaximises potential. Safety features include thermal overload protection and turbofan cooling - enables the ability to weld at greater power for longer periods. Providesfull portability, ease of use and convenience and superb value.Operates from a 230V (16 amp) supply. Heavy duty casing, twolarge diameter solid wheels. 2 year warranty.
Supplied complete with accessories, two large diameter solidwheels, integrated carrying handle and 2m mains cable. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21.
Contents:• CheetahTM AC power supply.• 1.8m primary cable, 16mm2.• 1.8m earth cable and 250A clamp.• Hand held face shield with 51 x 107mm glass.• Scratch brush and slag remover.• Instruction manual.
Input voltage: 230V, 50/60Hz.Fuse rating: 16A.Phase: 1.Power consumption: 2.5kW.Output current range: 55A - 160A.Open circuit voltage: 50V.Dimensions (L x W x H):585 x 325 x 425mm.
Product Weight Order CodeNumber each KEN-880
CheetahTM 17.4kg -2040KEAW160
Product Weight Order CodeNumber each KEN-880
LynxTM EAW140 14.8kg -2020K
Group 961 Group 888
TURBOF A NCOOLED
2YEARWARRANTY
LYNX
CHEETAH
LOWCURRENT
TURBOF A NCOOLED
2YEARWARRANTY
READY TOW ELD
READY TOW ELD
OS19_RSA_UNP_747_OS19_RSA_UNP_747.qxd 17/04/2019 17:08 Page 1
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019748
ARC (MMA) & TIG WELDERSGROUP
880W
ELD
ING
Group 732
Description Current Voltage Order CodeKEN-880
Cougar Infinity MMA 150A 230 -4060K
Cougar Infinity 150A Inverter MMAMMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking. Use with a wide range of electrodes, rutile, basic, stainless steel, cast iron. Complete with MMA welding accessories.Compact lightweight Design High welding current stability in spite of mains voltage fluctuations. Arc force, hot start and anti-stick devices.Thermostatic, over/under voltage, over-current ±15% protections. Generator Compatible (Min 6kW).
COUGAR-S
© Fotosearch
OS19_RSA_UNP_748_OS19_RSA_UNP_748.qxd 17/04/2019 17:08 Page 1
WELDING
ARC (MMA) & TIG WELDERS/ARC WELDER ACCESSORIES & SPARESGROUP
880
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019 749
Description Current Voltage Order CodeKEN-880
Jaguar PFC 150A 230 -3120K
Jaguar PFC Multi Voltage Inverter Welder
All the portability and performance of an inverter welder with a wide input voltage range of 100-240v. For MMA welding with rutile, basic,stainless steel and cast iron electrodes, as well as TIG welding with scratch striking.The fan cooled unit can handle unstable voltages and offers stable output in the case of over/under voltages. It also allows for the use oflong extensions (over 100m) and has Hot Start for easy starting, Arc Force for quality welds and Anti-Stick for reduced electrode sticking.Comes with carry case and accessories.Power Supply: 110/230V (DC) 50/60Hz single phaseCurrent Fuse Rating: 150ADuty Cycle @40 degrees C:90A@25%, 140A@25%Protection class: IP22Dimensions:385 x 150 x 265mm (LxWxH)
JAGUAR
Rating Handle Order Code(Amps) Colour KEN-885400 Yellow -6010K400 Red -6110K600 -6130K
90° Welding Angle ClampOne man set up and operation, made from cast iron, copperplated spindle for spatter protection, T-Handle enables highpressure for secure clamping, easy fixing to a work bench or machine tool table.
Capacity Weight Order Code(mm) each KEN-53960mm 05.3kg -0360K90mm 10.5kg -0390K
Twist Grip Short Stub Electrode Holders
Reduce fatigue and increase safety. All of the electrode is available for use and the angle allows the hand to remain away from the weld pool. The handle applies torque to the electrode clamp in the head.
OS19_RSA_UNP_749_OS19_RSA_UNP_749.qxd 17/04/2019 17:08 Page 1
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019750
WELDING
TIG WELDER ACCESSORIES & SPARESGROUP
880
Collets10N_ _ To suit WP17/18/26 torches.
Ceramic Cups - Standard Length10N_ _ To suit WP17/18/26 torches.
Product Bore Size Order CodeNumber KEN-88510N22 1.0mm (0.040”) -7210K10N23 1.6mm (1/16”) -7220K10N24 2.4mm (3/32”) -7230K10N25 3.2mm (1/8”) -7240K
Product Bore Size Order CodeNumber KEN-88510N50 1/4” (No. 4) -7360K10N49 5/16” (No. 5) -7350K10N48 3/8” (No. 6) -7340K10N47 7/16” (No. 7) -7330K10N46 1/2” (No. 8) -7320K10N45 5/8” (No. 10) -7310K10N44 3/4” (No. 12) -7300K
Product Bore Size Order CodeNumber KEN-88510N30 1.0mm (0.040”) -7260K10N31 1.6mm (1/16”) -7270K10N32 2.4mm (3/32”) -7280K10N28 3.2mm (1/8”) -7250K
Product To Suit Order CodeNumber KEN-88557Y04 Short -7710K57Y02 Long -7700K
Collet Bodies10N_ _ To suit WP17/18/26 torches.
Back CapsBIN57Y_ _ To suit WP17/18/26 torches.
Product Type & Size Order CodeNumber KEN-885
TTS017 Standard Rigid Head Tig Torch -3200K150DC/120AC - Air Cooled
TTF017 Flexible Head Tig Torch -3300K150DC/120AC - Air Cooled
TTS018 Standard Rigid Head Tig Torch -3220K350DC/250AC - Water Cooled
TTS026 Standard Rigid Head Tig Torch -3240K200DC/160AC - Air Cooled
TTF026 Flexible Head Tig Torch -3340K200DC/160AC - Air Cooled
WP17 WP17 Standard torch body -6500KWP18 WP18 Standard torch body -6520KWP26 WP26 Standard torch body -6540KWP17FX WP17 Flexi torch body -6510KWP26FX WP26 Flexi torch body -6550K
Gas Lens Ceramics54N_ _ To suit WP17/18/26 torches.
Product Bore Size Order CodeNumber KEN-88554N18 1/4” (No. 4) -7640K54N17 5/16” (No. 5) -7630K54N16 3/8” (No. 6) -7620K54N15 7/16” (No. 7) -7610K54N14 1/2” (No. 8) -7600K54N19 5/8” (No. 10) -7650K
Product Order CodeNumber KEN-88554N01 -7560K
Gas Lens Body45V24/25/26/27To suit WP17/18/26 torches.
Product Bore Size Order CodeNumber KEN-88545V24 1.0mm (0.040”) -7500K45V25 1.6mm (1/16”) -7510K45V26 2.4mm (3/32”) -7520K45V27 3.2mm (1/8”) -7530K
Tig TorchesWhether water or aircooled, all Kennedy Tigtorches are lightweightand durable. They comesupplied with a 12.5ft(3.8m) cable, andsilicon rubber rigid or flexible headmouldings for greater heat resistance.
Tig Torches &Bodies
Torch BodiesMade from tough ABS plastic with a silicone rubber head for
greater heat resistance and durability.
Tig TorchesCome complete with a 12.5ft 3.8m cable
Gas Lens Heatshield54N01
Suitable Order CodeFor KEN-885
WP17, 18 & 26 Tig torches -3400K
AC/DC TIG Welding Spares KitCan be used in AC or DC processes. Excellent arc starts at lowamperages, popular in such applications as orbital tube and pipemanufacturing, thin sheet metal work or jobs where small and delicateparts are welded. Like Thoriated electrodes, they are best used to weldcarbon and stainless steels, nickel alloys and titanium. Suitable forWP17, 18 and 26 Tig torches.Contents:5x 1.6mm collets,5x 1.6mm collet bodies,5x 2.4mm collets,5x 2.4mm collet bodies,2x No.4 ceramic cups,2x No.5 ceramic cups,2x No.6 ceramic cups,2x No.7 ceramic cups,2x No.8 ceramic cups,1x long back cap,1x short back cap,1x 1.6mm ceriated grey tungsten electrode,1x 2.4mm ceriated grey tungsten electrode.
All parts listed onthis pageFully compatible withmost other brands ofTig torches.
Back Caps
Torch Bodies
Cup Gaskets‘O’ Rings
CeramicCups
Gas LensCeramic
Collets
ColletBodies
Gas Lens
34PIECES
OS19_RSA_UNP_750_OS19_RSA_UNP_750.qxd 17/04/2019 17:09 Page 1
WELDING
MIG/MAG WELDERSGROUP
880
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019 751
PANTHER
Panther™ Synergic Mig
150AEasy setup and usage in the use of various types of materials (steel, stainless steel, aluminium) and in all possible applications, from maintenance to installation works. Fit for NO GAS/Flux welding, it can be transformed into Mig-Mag with Gas Connection kit. • Capable of welding up to 6mm material.• Capable of using 0.6 - 0.9mm wires including flux cored.
• Polarity reversal for GAS Mig-Mag/Brazing welding.
• Compact & light.• Microprocessor controlled.• Easy to use & excellent results.• Gas/Gasless and Brazing capabilities.• Generator safe.• Thermal overload switch.
Product Current Order CodeNumber Range KEN-880
PantherTM Synergic Mig 150A -4020K
Group 885
LEOPARD
Product Current Order CodeNumber Range KEN-880
LeopardTM Synergic Mig 170A -4040K
Leopard™ Synergic Mig Welder170AEasy setup and usage in the use of various types of materials (steel, stainless steel, aluminium) and in all possible applications, frommaintenance to installation works. Fit for NO GAS/Flux welding, it can be transformed into Mig-Mag with Gas Connection kit. • Capable of welding up to 8mm material.• Capable of using 0.6 - 0.9mm wires including flux cored.
• Polarity reversal for GAS Mig-Mag/Brazing welding.
• Compact & light.• Microprocessor controlled.• Easy to use & excellent results.• Gas/Gasless and Brazing capabilities.• Generator safe.• Thermal overload switch.
TWINROLLERFEED
TURBOF A NCOOLED
LOWCURRENT 2YEARWARRANTYCOMPATIBLE WITH BINZEL® B15TORCH SPARES
GASNO GAS
READY TOW ELD
OS19_RSA_UNP_751_OS19_RSA_UNP_751.qxd 17/04/2019 17:09 Page 1
Lion™ Multi-Process/Synergic Mig Welder
220A MIG/MMA/TIG220A multi-process (MIG/TIG/MMA) welding machine with MIGaccessories. Synergic control allows easy machine set up andcontrol in all welding processes. MIG/MAG process offersboth Gas and gasless welding and also Mig Brazing. Lift TIGis ideal for all stainless and mild steel applications. MMAwelding up to 3.2mm electrodes in both mild and stainlesssteel. Ideal for small to medium workshops and mobilewelders and maintenance and installation engineers.• Compact and light (22KG without wire)• Compatible with 5-15KG spools of wire• Microprocessor controlled MIG-MAG/FLUX/Brazing, DCLift TIG and MMA welding
• Fast Synergic adjustment to welding parameters through‘ONE TOUCH’ technology
• Intelligent and automatic Arc control• Manual setting adjustment to suit welders style and technique
• ONE TOUCH LCD graphic display allows better reading of welding parameters, voltage, current and welding wire speed
• Advanced Thermal control• 17 different synergy curves• Regulation of wire feed up slope (soft start)• Burn back timer and post gas• Spot welding operation• Generator safe (Min 9 kVA required)• Over/Under voltage protection• Thermal cut out
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019752
WELDING
MIG/MAG WELDERSGROUP
880
LION
Product Current Order CodeNumber Range KEN-880
LionTM Duel Synergic 220A -4080K
TWINROLLERFEED
TURBOF A NCOOLED
LOWCURRENT 2YEARWARRANTYCOMPATIBLE WITH BINZEL® B15TORCH SPARES
READY TOW ELD
Length For Wire Order Code(m) Size (mm) KEN-8833 0.6 - 0.9 -7010K3 1.0 - 1.2 -7040K4 0.6 - 0.9 -7020K4 1.0 - 1.2 -7050K
Mig Torch Liners PVC-coated for use with steel wire. Colour-coded to indicate wire size:0.6 - 0.9mm = Blue,1.0 - 1.2mm = Red.
OS19_RSA_UNP_752_OS19_RSA_UNP_752.qxd 17/04/2019 17:09 Page 1
WELDING
MIG WELDER ACCESSORIES & SPARESGROUP
885
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019 753
Euro Connection Torches
Fitted with EURO connectors, with insulated gas nozzles for use with mixed gases and a 4m supple, lightweight cable to improve productivity.MTE-154 suits Kennedy Panther and Leopard.MTE-254 suits Kennedy Tiger and Lion.
Product Max. Wire Sizes Standard Cable Order CodeNumber Rating (mm) Tip Size Length KEN-885MTE154 150A 0.6 - 1.0 0.8mm 4m -3080KMTE254 230A 0.8 - 1.2 1.0mm 4m -3100KMTE364 340A 0.8 - 1.2 1.2mm 4m -3120K
4mCABLE WITH
FITTED LINER &STANDARD
TIP
Mig Torch Accessories
Contact Tips & Tip AdaptorsCompatible with Parweld and Binzel Torches.
For Torch For Wire Order CodeNumber Size (mm) KEN-883
MTE 0.6 -7120K
154 0.8 -7240K1.0 -7360K
MTE 0.8 -7200K0.8 H.Duty -7220K
254/ 1.0 -7300K
364 1.0 H.Duty -7320K1.2 -7400K
MTE 254 Tip Adaptor -7500K
For Torch Order CodeNumber
StyleKEN-883
MTE15-4 Conical -7600KConical -7610KMTE254 Tapered -7640K
STD364 Conical -7620K
MB15
MB25
NozzlesConical
Tapered
OS19_RSA_UNP_753_OS19_RSA_UNP_753.qxd 17/04/2019 17:10 Page 1
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019754
WELDING
GAS WELDING & CUTTINGGROUP
885
Individual Fitted Welding Hoses EN 559/BS EN ISO 3821
Individual Fitted Welding HosesKink and crush resistant hoses with industry standard 3/8” BSP fittings on the regulator end.Hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Manufactured to EN 559/BS EN ISO 3821.OXYGEN - Blue Hose, right hand thread.ACETYLENE - Red Hose, left hand thread.PROPANE - Orange Hose, left hand thread.
OXYGEN ACETYLENE PROPANEHose Length DSCV Reg. Order Code Order Code Order CodeSize Nut CTL-885 CTL-885 CTL-8856mm 5m 1/4” 3/8” -7950A -7958A -6mm 10m 1/4” 3/8” -7950B -7958B -6mm 20m 1/4” 3/8” -7950D -7958D -6mm 5m 3/8” 3/8” -7951A -7959A -7967A6mm 10m 3/8” 3/8” -7951B -7959B -7967B6mm 20m 3/8” 3/8” -7951D -7959D -8mm 5m 3/8” 3/8” -7953A -7961A -8mm 10m 3/8” 3/8” -7953B -7961B -8mm 20m 3/8” 3/8” -7953D -7961D -10mm 5m 3/8” 3/8” -7955A -7963A -7971A10mm 10m 3/8” 3/8” -7955B -7963B -7971B10mm 20m 3/8” 3/8” -7955D -7963D -7971D
ANM Cutting Nozzles
Acetylene nozzle mix can be used with the majority of popular cuttingtorches. Plate thickness refers to mild steel.
PNM Cutting Nozzles75mm long propane nozzle mix can be used with the majority ofpopular cutting torches.
Nozzle Plate Order CodeDiameter Thickness KEN-883
1/32” 6mm -2110K3/64” 12mm -2120K1/16” 75mm -2130K5/64” 100mm -2140K3/32” 150mm -2150K1/8” 300mm -2160K
Nozzle Plate Order CodeDiameter Thickness KEN-883
1/32” 6mm -2010K3/64” 12mm -2020K1/16” 75mm -2030K5/64” 100mm -2040K3/32” 150mm -2050K1/8” 300mm -2060K
OS19_RSA_UNP_754_OS19_RSA_UNP_754.qxd 17/04/2019 17:10 Page 1
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019 755
GROUP
885GAS WELDING & CUTTINGWELDING
Nozzle Cleaner SetProlongs the life of gas welding and cutting nozzles. High strength, needle type files housed in an anodised aluminiumflip-up pocket case.
Product Weight Order CodeNumber each KEN-8831216 20g -2500K
Oxygen Regulators
Designed with 2 gauges to indicate cylinder contents and outletpressure. 4.0 Bar Oxygen RegulatorFull 300 bar capacity. 10.0 Bar Oxygen Regulator Full 300 bar capacity. Bottom entry design, which is suited for top outlet cylinder valves. Fitted with 1/4” parallel threaded gauges, standard 3/8” BSP outlet and5/8” BSP inlet connections.
Argon & Acetylene Regulators Designed with two gauges to indicate cylinder contents and outlet pressure. Argon regulator outlet gauge is calibrated for flow 0 - 35lpm.Acetylene regulator has a calibrated flow rate of 0 - 1.5 bar with a full 250 bar capacity.Features:Flow rates up to 80m3/h (2824 ft3/h) 300 bar capability. Features 2 gauges displayingcylinder contents and pressure.Bottom entry design suited for top outlet cylinder valves.Fitted with 1/4” parallel threaded gauges. Fitted with standard 3/8” BSPoutlet. Fitted with 5/8” BSP inlet connections.
Gas Order CodeType KEN-884
10.0 Bar Oxygen -4120K4.0 Bar Oxygen -4140K
Gas Order CodeType KEN-884
Acet. Regulator -4200KArgon Regulator -4300K
OS19_RSA_UNP_755_OS19_RSA_UNP_755.qxd 17/04/2019 17:10 Page 1
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019756
WELDING FLUIDS/WELDING CURTAINSGROUP
885WELDING
Flaw InspectionSystem
Fast reliable method for visually inspectingand spot-checking surfaces of welds, exoticalloys or standard metals, highly stressedstructural members, critical castings, shafts,gears, spindles, and any other hard partwhere identification of surface flaws isessential. Detects flaws such as cracks, pin holes, welding laps and porousnesseither during manufacture or on-site. A three-part system. SF1-500B is a cleaner. SF2-500B is a dye penetrant. SF3-500B is a developing fluid that reactswith the dye in SF2-500B to show smallcracks in the weld. Each part supplied in anozone friendly 500ml aerosol.
Flaw Detector DeveloperWhite film to highlight any faults which havebeen detected when using Flaw DetectorPenetrant. The product should be removedusing Flaw Detector Cleaner Spray oncecracks have been found and marked.
Flaw Detector Dye PenetrantHighly sensitive red dye, for use whendetecting flaws on metal components undernormal lighting conditions.
Flaw Detector Cleaner SprayQuick drying, powerful solvent for cleaningsurfaces prior to testing. Removes contaminants including oils,greases and grime.
BIG VALUE500ml Cans!
Product Size Order CodeNumber SOL-732SF3-500B 500ml -0280K
Product Size Order CodeNumber SOL-732SF2-500B 500ml -0260K
Product Size Order CodeNumber SOL-732SF1-500B 500ml -0240K
Welder’s Anti-Spatter SpraySW1-400CDuring welding small blobs of molten metal(spatter) fall either side of the weld. Thisspray is applied before welding to preventspatter sticking to the metal. CO2 propelledaerosol. Silicone-free and removable withsolvents prior to galvanising or painting.Multi-Use Fluid:• Welding wire (MIG)lubricant
• Post weld corrosionprotector
• Silicone and CFC free• Easy to wipe or rub away• Non flammable product• Non flammable propellant
Product Order CodeNumber Size SOL-732
SW1-400C 400g -0840K
Order CodeSize SOL-7325ltr -9300K20ltr -9310K
Maintenance Welder’sAnti-Spatter FluidReduces the risk of joint puddling andgreatly reduces preparation time prior to finalpainting. Does not affect any subsequentgalvanising or painting operations. Evaporates under normal weldtemperatures. Dichloromethane and silicone-free. Non-flammable, non-toxic, non-corrosive and biodegradable.
WATER-BASED
Colour Size W x H Order Code(mm) KEN-885
Dark Green Reinforced 1300 x 1800 -8640KAmber Hi-Vis 1300 x 1800 -8740K
Dark Green Reinforced 1300 x 2400 -8660KGreen Polished 1300 x 2400 -8960K
Dark Green Reinforced 1300 x 2800 -8680KGreen Polished 1300 x 1800 -8940KAmber Hi-Vis 1400 x 2400 -8780K
PVC Welding Curtains
PVC curtains for suspension from curtain poles. Standard sized curtains with snap-fasteners onboth sides for joining to obtain total desired width. Supplied with reinforced holes in the upperedge and steel suspension rings. All standard curtains are made of pliable, self-extinguishingPVC material with flash point 320 - 390°C. EN1598 for welding (fulfilling requirements ontransmittance, reflectance, UV-stability and resistance to ignition). Supplied with steel curtainrings.
OS19_RSA_UNP_756_OS19_RSA_UNP_756.qxd 17/04/2019 17:11 Page 1
Colour Order CodeKEN-885
Black -5100KUnion Jack -5120K
Type Pack Order CodeQty KEN-885
Inner Lens Cover 10 -5160KOuter Lens Cover 10 -5165K
Adjustable Headband 1 -5180KSweatband 1 -5190K
Spares to suit KWH100 HelmetsLens covers protect the LCD cartridge unit from weld spatter.
Large View Automatic Welding & Grinding Helmets
KWH100Large view (98 x 55mm) impact resistant welding helmets withdedicated grinding mode. Suitable for all kinds of weldingtypes, including TIG low amperage. Made of durable,lightweight corrosion resistant and flame retardantmaterial. Auto darkening lenses automatically changefrom light to dark shade when arc is struck. Externalsensitivity control provides clear vision both prior toand during welding, whilst ultra high performancefilters protect against UV and IR. Special turnoverheadband mechanism offers greater comfort andreduces fatigue.Viewing Field: 98 x 55mm (3.86” x 2.17”)UV/IR Protection: Up to Shade DIN16Light State: DIN4Variable Shade: From DIN9 to DIN13Reaction Time: 0.00005 sec (1/20,000 s)Delay Time: Long - Middle - Short (variable from0.3s – 0.9s)Sensors: Four infrared detectorsPower Supply: Solar cells + CR2450 lithium battery (supplied PAN-904-2550K)Power On/Off: Fully automaticOperating Temperature: -5°C to +55°C (23°F to 131°F)Storing Temperature: -20°C to +70°C (-4°F to 158°F)Helmet Material: High impact resistant Polyamide (Nylon)The product is in full conformity with related DIN EN 379, DIN EN 175 B and ANSI Z87.1 Safety Standards.
Light to dark0.00005 seconds
SolarPowered
SolarPowered
These helmets meet impactresistancespecification DIN EN 175 Bfor grinding
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019 757
GROUP
885WELDING HELMETSWELDING
Visor Order CodeType KEN-885Flip-up -7150KFixed -7160K
Welder's HelmetsThe entry level to the Kennedy helmet range, both lift up over brow strap when not in use and accept plain and tinted lenses which are available separately.Lens size: 41/4” x 31/4”Weight: 434g
-7150K
-7160K
OS19_RSA_UNP_757_OS19_RSA_UNP_757.qxd 17/04/2019 17:12 Page 1
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019758
WELDER’S CLOTHINGGROUP
885WELDING
SizeWeight Order Codeeach WDA-957
71/8” 35g -5500K71/4” 35g -5510K73/8” 35g -5520K71/2” 35g -5530K75/8” 40g -5540K73/4” 40g -5550K
Welder’s CapsComfortable, durable and washable welder’scaps. Double stitched construction withabsorbent cotton sweat band. Can be wornwith the peak to the rear when a screen isused. New improved version with taped,reinforced internal seams for extra durability and improved comfort.
JacketsStud fastening jacket for full neck to waist protection against weldspatter and grinding sparks. With external side pocket, neck is linedwith soft split leather for extra comfort. All seams have heavy duty stitching for durability and extended wear. CE approved toEN470-1 CAT II.
SleevesCan be used independently or in conjunctionwith an apron or other garment to offeroptimum protection of the lower arm andelbow. With elasticated openings. All seamshave heavy duty stitching for durability andextended wear. One size. CE approved to EN470-1 CAT II.
GaitersFor wearing over workshoes to protectagainst weld spatter and grinding sparks.With Hook-n-Loop fastening on back of calfand buckle adjustment around shoe. Doublestitched and riveted seams for extra heavyduty use. CE approved to EN470-1 CAT II.Size: 35cm.
Colour W x L Order Code(cm) KEN-885
Tie FasteningGrey 60 x 090 -8020KGrey 60 x 105 -8030KRed 60 x 090 -5410K
Buckle FasteningGrey 60 x 090 -8060KRed 60 x 090 -5440K
Chrome Leather Welder’s Clothing
A range of economically priced rugged workwear manufactured from high quality selected chrome leather. Spatter-resistant and tear-resistant.The full range offers head-to-toe protection against weld spatter and grinding sparks. Suitable for use in workshops, foundries and on-site.
ApronsGenerous fit for full torso and upper leg protection against weldspatter and grinding sparks, whilst offering freedom of movement forthe wearer. All seams have heavy duty stitching for durability andextended wear. Available in a choice of tie or buckle fastening. CE approved to EN470-1 CAT II.Colours: available in a choice of grey or red.
Colour Size Order CodeKEN-885
Grey L -8160KGrey XL -8170KRed L -5222KRed XL -5223K
Colour Order CodeKEN-885
Grey -8260K
Colour Size Order CodeKEN-885
Grey 45cm -8220KRed 45cm -5310K
OS19_RSA_UNP_758_OS19_RSA_UNP_758.qxd 17/04/2019 17:12 Page 1
WELDING
WELDING GLOVES/MIG WIREGROUP
887/961
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019 759
15kg Reels Use with CO2 or Ar-CO2shielding gas.
*Precision layer wound forpositive snag free feeding.
A18BS 2901
A18 MigWire Reels
Deposits C - 1.3% Mn weld metal for mild and medium tensile steels.Copper coat finish and double deoxidised. For use with CO2 or Ar-CO2shielding gas. Made to BS 2901/1 : 1983 A18 & BS EN 440 G3Si1. For welding mild steel and C-Mn steels such as boilers, tanks,pipework, machinery, vehicle chassis fabrication and shipbuilding.0.7kg and 5.0kg reels are random wound. Both sizes are designedand packaged for use on Kennedy Dual Mig welders, Mini Migs,Migmates etc. Use with CO2 or Ar-CO2 shielding gas.
Product Wire Order CodeNumber Diameter KEN-887
*A18-060-15.0 0.6mm -2060K*A18-080-15.0 0.8mm -2080K*A18-100-15.0 1.0mm -2100K*A18-120-15.0 1.2mm -2120K
5.0kg Reels
Product Wire Order CodeNumber Diameter KEN-887
A18-060-5.0 0.6mm -1960KA18-080-5.0 0.8mm -1980KA18-100-5.0 1.0mm -2000K
PLW15kg Reels
FOR MILD STEEL &
C-Mn STEEL
BEST SELLER
A18BS 2901
FOR MILD STEEL &
C-Mn STEEL
Reversible Welder’s Gauntlet
Reversible (ambidextrous) lined, green gauntlet. Type A. CE approved to EN12477, EN388, EN407.
Size Weight Order Codeper Pr KEN-961
10.5 250g -1940K
Size Order CodeTFF-961
10 -1650K
Grey Leather Tig Welder’s GlovesSoft, high quality nappa leather palm and stiff 150mm chrome leather cuff offers a superb feel and good durability for precision welding. 360mm overall length.EN420 (Dexterity) Level 5.
EN1247
CAT
II 2.1.2.2
1
2
2
2
4.X.X.X.4.X
CAT
II 3.2.4.4
44
3
2Welding Gloves
Heavy Duty Welder’s GauntletFull five finger welder’s gauntletmanufactured from select split leatherwith a full cotton lining with a one pieceback. Reinforced palm and thumb forincreased wear with noexposed seams toburn. Kevlar© sewnthroughout. Tested to EN388:2003 & EN407: 2004.
CAT
II 4.1.4.3
EN388
4.1.3.2.4.X
EN407
Size Order CodeTFF-961
10 -6630K
OS19_RSA_UNP_759_OS19_RSA_UNP_759.qxd 17/04/2019 17:13 Page 1
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019760
WELDING
MIG WIRE/TIG TUNGSTEN ELECTRODESGROUP
887/889
Type Wire Order CodeDiameter KEN-8870.8mm -0520K308LSi 1.0mm -0530K
309LSi 1.0mm -0570K0.8mm -0540K
316LSi 1.0mm -0550K1.2mm -0560K
Stainless Steel Mig Wire
Ideal for welding stainless steels. It has increased silicon content for an improved weld that produces a smoother moreconsistent bead making it ideal for use where appearance isimportant. For use on stainless steel structures. Supplied on aprecision layer wound reel for positive uninterrupted feeding.Weight: 15kg.
FOR STAINLESS
Tig Tungsten ElectrodesAll conform to ISO 6848 (DIN EN 26848 and AWS A5 12-92.
0.8% Zirconiated WhiteTungsten ElectrodesIdeal for high precision,exceptional quality AC welding on aluminium alloys as it retainsa balled tip and has a highresistance to contamination. The current carrying capability is equal or greater than that of thoriated tungsten. Non-radioactive. Not suitable for DC welding.
Electrode Diameter Order CodeType KEN-889
1.6mm -0820KZirconiated 2.4mm -0830KWhite 3.2mm -0840K
4.0mm -0850K
2% Ceriated Grey TungstenElectrodesSuitable for both AC and DCwelding but performsexceptionally well at low currentsettings in DC welding. A popularnon-radioactive replacement for2% Thoriated TungstenElectrodes as like the thoriumelectrodes they are best used to weld carbon, stainless steels, nickel alloys, copper and titanium alloys. Also ideal for small and delicate welding.
Electrode Diameter Order CodeType KEN-889
Ceriated 1.6mm -0120KGrey 2.4mm -0130K
3.2mm -0140K
Flux Core Gasless WireGeneral-purpose Mig wire with self-shielding flux core,allowing it to be used without the need for a separateshielding gas. Designed and packaged specifically for use onKennedy Dual Mig welders, Mini Migs, Migmates etc. For weldingmild steel and C-Mn steels such as boilers, tanks, pipework,machinery, vehicle hassis fabrication. 0.8mm diameter mini reels.Random wound and not layer wound.
A18BS 2901
Product Reel Order CodeNumber Size KEN-887
FCG-080-0.9 0.90kg -1640K
FOR MILD STEEL &
C-Mn STEEL
OS19_RSA_UNP_760_OS19_RSA_UNP_760.qxd 17/04/2019 17:13 Page 1
WELDING
ARC WELDING ELECTRODESGROUP
891
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR© 2019 761
Electrodes For Cast IronA Graphite coated iron-nickel alloy electrode for high strength jointing of cast iron and cold welding of cast iron, it deposits 95%Ni +2%Fe weld metal. Can be used for repairing broken cast iron, joining of cast iron to steel and building up worn parts. Meets the following standards: AWS A 5.15 E Ni-C1 Din 8573 E Ni BG 11.
Electrodes for Mild SteelsE7018 (‘Low Hydrogen’)Basic coated, all positional rods.Applications: for steel plate structural steels, pipe work and forgings. Ideal for repairs of casting and machinery, compensate for dilution effect of poor steels. Often used where rutile deposits may be at risk from cracking. N.B. Suitable for AC (70V minimum open circuit)and DC+. Optimum rooting operabilityis obtained using DC-.Conforms with AWS and BS EN standards.
Type Size Recommended Order Code(mm) Amperage KEN-8912.5 70A -1220K
S-NFC 3.2 100A -1230K4.0 145A -1240K
Size No. of Rods Weight Order Code(mm) (per Pk) (per Pk) KEN-891
2.60 x 300 260 5.0kg -5110K3.20 x 350 150 5.0kg -5120K4.00 x 450 100 5.0kg -5130K
Recommended AmperagesSize (mm) 2.6 3.2 4.0
Min. 70A 95A 130AMax. 100A 125A 170A
FOR MILD STEEL &
C-Mn STEEL
FORCASTIRON
Size No. of Rods Weight Order Code(mm) (per pack) (per pack) KEN-891
2.50 x 300 260 5.0kg -3010K3.25 x 350 150 5.0kg -3020K4.00 x 350 100 5.0kg -3030K
Recommended Amperages
Electrodes for Mild Steels 6013
Arc welding rods for mild steel and medium tensile steels. Medium rutile coated, all positional rods. Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions. Superb finish with self-releasing slag.N.B. Suitable for AC (50V minimum open circuit) and DC +/-.
Kennedy AWS 6013 mild steel electrodes are manufactured to thefollowing standards: Lloyds certificates: BGK0610002/01, BGK0610002/02 &MATS/THA-1002/12/1.ABS certificates: BG575520-X3, BG575520-X2, BG575520-X4,BG575520-X5 & BG575520-X6.
Size (mm) 2.5 3.2 4.0
Min. 70A 95A 130AMax. 100A 125A 170A
FOR MILD STEEL &
C-Mn STEEL
OS19_RSA_UNP_761_OS19_RSA_UNP_761.qxd 17/04/2019 17:14 Page 1
Recommended