View
257
Download
0
Category
Preview:
Citation preview
1 Mechanical Engineering Research Day 2015
CONTENTS
INTRODUCTION………………………………………………………………………………………………. 2
PROGRAMME SCHEDULE…………………………………………………………………..…………….3
ORGANIZING COMMITTEE………………………………………………………………………………. 4
REVIEW COMMITTEE………………………………………………………………………………………. 7
POSTER FLOOR-PLAN……………………………………………………………………………………….8
POSTER PRESENTATION………………………………………………………………………………….. 9
SPONSORSHIP…………………………………………………………………………………………….... 15
2 Mechanical Engineering Research Day 2015
INTRODUCTION
Starting off as the Hari Penyelidikan FKM 2011, for the year 2015, the event
was renamed as the Mechanical Engineering Research Day 2015 (MERD'15) to
give a more global image. The MERD’15 is organized by the Faculty of
Mechanical Engineering (FKM) in association with the Centre for Advanced
Research on Energy (CARe) of Universiti Teknikal Malaysia Melaka (UTeM),
which will take place at Kampus Teknologi, UTeM, Melaka on 31 March 2015.
The theme of MERD'15 is "Pioneering Future Discovery", while the objective is
for the scientists, scholars, researchers and students from UTeM to present
findings of on-going research or work. The other objective is to introduce and
promote the UTeM research activities in the scientific field of mechanical
engineering through poster presentations and publications, to offer mentoring
through senior researchers and scientists, and to foster the building of
networks through the informal style of the event.
During MERD’15, 74 posters will be presented, where the short papers have
been published in the Open Access e-Proceedings (eISBN: 978-967-0257-51-8)
via www3.utem.edu.my/care/proceedings. The e-Proceedings will be indexed
in Google Scholar and will also be submitted to Thomson Reuters (formerly
known as ISI) Conference Proceedings Citation Index™ for indexing
consideration in Web of Science® coverage.
Authors of MERD’15 may proceed with the submission of high quality full-
length papers for publication in special issues in one of our supporting indexed
journals, subject to their normal peer-review procedures. The journals are:
(a) Jurnal Teknologi (Sciences and Engineering) - indexed by SCOPUS
(b) Journal of Mechanical Engineering and Technology - indexed by MyCite
(c) Journal of Engineering and Technology - indexed by MyCite
3 Mechanical Engineering Research Day 2015
PROGRAMME SCHEDULE
31 March 2015 (Tuesday) 8:00 Registration & Poster Set-Up
- Foyer, Faculty of Engineering Technology, UTeM
8:30 – 12:00 Poster Judging & Exhibition
- Foyer, Faculty of Engineering Technology, UTeM
9:00 Opening Ceremony and Launching of CARe Logo
(by the Vice Chancellor UTeM, Prof. Datuk Dr. Shahrin Bin Sahib@Sahibuddin) - Dewan UTeM 1
9:40 Group Photo Session 9:45 VVIP Poster Viewing 10:30 Breakfast (VVIP) 12:00 Luncheon (Committees, Presenters, Judges)
- Cafeteria, Kampus Teknologi, UTeM
14:00 Poster Exhibition (Cont.) 15:00 – 16:30 Closing Ceremony; Certificate & Award Presentation
(by the Dean of Faculty of Mechanical Engineering UTeM, Assoc. Prof. Dr. Noreffendy Bin Tamaldin) - BK5, Faculty of Mechanical Engineering, UTeM
4 Mechanical Engineering Research Day 2015
ORGANIZING COMMITTEE
Chairman Deputy Chairman
Assoc. Prof. Noreffendy Bin Tamaldin Dr. Abd Rahman Bin Dullah
Director Deputy Director
Dr. Mohd Fadzli Bin Abdollah Dr. Tee Boon Tuan
Secretary
Dr. Umar Al-Amani Bin Haji Azlan Mrs. Suhaila Binti Mohd Yusof
Publication
Dr. Mohd Zulkefli Bin Selamat Dr. Reduan Bin Mat Dan
5 Mechanical Engineering Research Day 2015
Submission
Dr. Rainah Binti Ismail Mr. Hilmi Bin Amriuddin Mrs. Sushella Edayu
Binti Mat Kamal
Registration
Dr. Shamsul Anuar Bin Shamsudin Mr. Muhammad Zulfattah Bin Zakaria
Evaluation Panel
Prof. Dr. Md. Radzai Bin
Said Assoc. Prof. Ahmad Rivai Assoc. Prof. Dr. Ir. Abdul
Talib Bin Din
Logistic and Technical
Dr. Mohd Azman Bin Abdullah Dr. Faiz Redza Bin Ramli
6 Mechanical Engineering Research Day 2015
Publicity
Ir. Dr. Mohd Rizal Bin Alkahari
Certificate and Souvenir
Dr. Siti Nurhaida Binti Khalil Mrs. Norasra Binti A. Rahman
Special Tasks
Dr. Noor Azmmi Bin Masripan Dr. Sivakumar A/L Dhar Malingam
7 Mechanical Engineering Research Day 2015
REVIEW COMMITTEE
Abd Rahman Bin Dullah
Abd Salam Bin Md Tahir
Abdul Munir Hidayat Syah Lubis
Abdul Talib Bin Din
Ahmad Anas Bin Yusof
Ahmad Kamal Bin Mat Yamin
Ahmad Rivai
Aliza Binti Che Amran
Azma Putra
Cheng See Yuan
Chong Shin Horng
Faiz Redza Bin Ramli
Fatimah Al-Zahrah Binti Mohd Sa'at
Herdy Rusnandi
Hilmi Bin Amiruddin
Imran Syakir Bin Mohamad
Mariam Binti Md Ghazaly
Md Isa Bin Ali
Md. Fahmi Bin Abd. Samad
Md Radzai Bin Said
Mohd Ahadlin Bin Mohd Daud
Mohd Asri Bin Yusuff
Mohd Azli Bin Salim
Mohd Azman Bin Abdullah
Mohd Fadzli Bin Abdollah
Mohd Haizal Bin Mohd Husin
Mohd Juzaila Bin Abd. Latif
Mohd Khairi Bin Mohamad Nor
Mohd Nizam Bin Sudin
Mohd Rizal Bin Alkahari
Mohd Zaid Bin Akop
Mohd Zulkefli Bin Selamat
Nona Merry Merpati Mitan
Nor Azmmi Bin Masripan
Norasra Binti A.Rahman
Noreffendy Bin Tamaldin
Nur Rashid Bin Mat Nuri @ Md Din
Omar Bin Bapokutty
Rafidah Binti Hasan
Rainah Binti Ismail
Roszaidi Bin Ramlan
Safarudin Gazali Herawan
Shamsul Anuar Bin Shamsudin
Siti Hajar Binti Sheikh Md. Fadzullah
Siti Nurhaida Binti Khalil
Sivakumar A/L Dhar Malingam
Sushella Edayu Binti Mat Kamal
Tan Chee Fai
Tee Boon Tuan
Umar Al-Amani Bin Haji Azlan
Zairulazha Bin Zainal
Zakiah Binti Halim
Mech
anical En
gineerin
g Research
Day 2
01
5
“P
ioneering Future D
iscovery”
Entran
ce
1&
2
Recep
tion
3&
4
5&
6
13
&1
4
15
&1
6
19&
20
21
&2
2
23
&2
4
25
&2
6
29&
30
31
&3
2
33
&3
4
35
&3
6
37
&3
8
39&
40
41
&4
2
43
&4
4
45
&4
6
47
&4
8
49&
50
51
&5
2
53
&5
4
55
&5
6
57
&5
8
59&
60
61
&6
2
63
&6
4
65
&6
6
67
&6
8
69&
70
71
&7
2
7&
8
9&
10
11
&1
2
17
&1
8
27
&2
8
73
&7
4
Registration Desk
DEW
AN
UTeM
1
Samsu
ng
IoT
Jugd
es R
egistration
R
oo
m
Cafeteria
Po
ster Session
– Floo
r Plan
(Foyer, Facu
lty of En
gineerin
g Techn
olo
gy, UTeM
)
9 Mechanical Engineering Research Day 2015
POSTER PRESENTATION
Poster No.
Title Author(s)
01 Preliminary study of KNN thin films doped by rare-earths for sensor applications
M.H. Maziati Akmal, A.U. Al-Amani, A.R. Mohd Warikh, A. Nurul Azuwa
02 Effect of pineapple leaf fiber loading on the properties of pineapple leaf fiber – polypropylene composite
A.N. Kasim, M.Z. Selamat, N. Aznan, S.N. Sahadan, M.A.M. Daud, S. Salleh, R. Jumaidin
03 Investigation of the stress conditions of u-bend 316L stainless steel after performing cold mechanical process
W.M.F.W. Mohamad, M. Z. Selamat, B. Bunjali, H.M. Dom
04 Comparison of thermal conductivity for HHT-24 CNF-based nanofluid using deionized water and ethylene glycol as based fluid
N.S. Zaini, S.N. Syed Idrus, N. Abdullah, M.H.M. Husin, I.S. Mohamad
05 The effect of nanocarbon characteristics on enhancing thermal properties of nanofluids
S. Zainal Abidin, I.S. Mohamad, N. Abdullah, A.Y. Bani Hashim
06 Thermal properties and heat transfer study of dispersed fluid with functionalized multi-walled carbon nanotube (MWCNT) particles
F.N. Zahari, N. Abdullah, I.S. Mohamad
07 Effect of process variables on the tensile shear strength of spot welds in 6061-T6 aluminum alloy
S. Thiru, Siti Hajar Ahmad Razin, S. Hema, I.S. Mohamad
08 Charpy impact response of oil palm empty fruit brunch fiber reinforced metal laminate system
Fadzila Hussain, D. Sivakumar, S. Kathiravan, Mohd Ahadlin Mohd Daud
09 Thermal performance of carbon-based microencapsulated phase change materials
A.Z.I. Abdullah, M.F.B. Abdollah, B.T. Tee, H. Amiruddin, A.K. Mat Yamin, N. Tamaldin
10 Fabrication and testing of energy regenerative suspension
M.A. Abdullah, J.F. Jamil, N.S. Muhammad
11 Experimental validation of single cylinder diesel engine using engine simulation tools
M.H. Ahmad, N. Tamaldin, A. K. Mat Yamin, S.C. Lee
10 Mechanical Engineering Research Day 2015
Poster No.
Title Author(s)
12 Formula varsity race car - Roll dynamic analysis
M.A. Abdullah, J.F. Jamil, N. Ismail, M.Z. Mohammad Nasir, M.Z. Hassan
13 Driving assistance system – Automatic parking maneuver using Lego Mindstorms
M.A. Abdullah, M.A. Romeli, F.R. Ramli, M.K. Mohamed Nor
14 Autonomous vehicle convoy using Lego Mindstorms
M.A. Abdullah, M.A. Azan, F.R. Ramli, M.K. Mohamed Nor
15 The effect of different thickness material stacking for four layer spot welding
Mohd Harris Fadhilah, Nur Fatihah Madi
16 Taguchi modeling of process parameters in VDG-MOSFET device for higher Ion/Ioff ratio
K.E. Kaharudin, A.H. Hamidon, F. Salehuddin
17 Inline pin fin heat sink model and thermal performance analysis for central processing unit
Khalil Azha Mohd Annuar, Fatimah Sham Ismail, Mohamad Haniff Harun, Mohamad Firdaus Mohd Ab Halim
18 Stress level on sustainable vibration isolator using numerical method
M.A. Salim, S. N. Jamaluddin, A. Putra, M.A. Abdullah
19 The effect of diffuser angle on modified generic side view mirror
Nur Rashid bin Mat Nuri, Abdul Rahman bin Mohd Nasir, Mohd Suffian bin Ab Razak
20 Design from nature: Development of a database to support product development
S.F. Wong, S. Maidin
21 Study of electrical characteristic for 50nm and 10nm SOI body thickness in MOSFET device
M.N.I.A. Aziz, F. Salehuddin, A.S.M. Zain, K.E. Kaharuddin
22 Redesign of automotive brake pedal based on castability analysis
M.N. Sudin, F.R. Ramli, S.A. Shamsuddin, M.M. Tahir, M.M. Mustafa, M.A. Affan
23 Comparative study for material removal rate, surface finish and electrode wear rate on die sinking EDM
H.H. El Grour, S. Maidin
24 Kinematic synthesis of planar, shape-changing rigid body mechanisms for slat design profile
M.H. Ismail, S.A. Shamsudin, M.N. Sudin
11 Mechanical Engineering Research Day 2015
Poster No.
Title Author(s)
25 Pneumatic gear shifter analysis M.A. Abdullah, M.A. Mohd Ahyak, M.A.I. Abd Hamid, F.R. Ramli, S.A. Shamsudin
26 Energy audit for lighting in an academic building – Case study in UTeM
Younus Fahad Breesam, B.T. Tee, Z.M. Zulfattah
27 Preliminary study on tribological properties of banana peel broth as additive in paraffin oil
M.M.B. Mustafa, N.A.B. Masripan, M.F.B. Abdollah, J. Basiron
28 Investigation on oxidation of jatropha oil
A.M.H.S. Lubis, B. Ariwahjoedi, M.B. Sudin
29 Stability of nano-oil by pH control in stationary conditions
H. Amiruddin, M.F.B. Abdollah, A.M. Idris, M.I.H.C. Abdullah, N. Tamaldin
30 Energy analysis on ACMV system for an academic building – Case study in UTeM
Ahmad Zubair Yahaya, B.T. Tee, Yusmady Mohamed Arifin
31 Modeling for assessing the dynamic performance of pneumatic valve
N.S. Osman, A.Y. Bani Hashim
32 Optimizing PID controller for an electro-hydraulic servo system via gradient descent technique
C.C. Soon, R. Ghazali, H.I. Jaafar, S.Y.S. Hussien
33 Precision control performances of a vertical motion electrostatic actuator stage with locking function
M.M. Ghazaly, Y.P. Chin, K. Sato
34 Force tracking control of MR damper and controller parameter optimization using sensitivity analysis method
M.F. Md Isa, M.H. Harun, M.A. Abdullah, N.S. Muhammad
35 Body to ground improvement at trim and form machine in end-of-line process
M.H. Mohtar, S. Maidin
36 Performance on tensile properties of GFRP stacking sequence using Taguchi method
M.A. Md Ali, A.K. Khamis, N.I.S. Hussein, R.I. Raja Abdullah, M.S. Kasim, M.H. Abu Bakar, E. Mohamad, M.A. Sulaiman
37 Design of slanted glass injection mould for flow visualization of molten plastic
M.A. Md Ali, M.F. Khalik, S. Subramonian, Z. Abdullah, R. Jaafar, P.J. Liew, M.S. Abdul Aziz
12 Mechanical Engineering Research Day 2015
Poster No.
Title Author(s)
38 Design of semi-auto line for gula melaka processing
K.A. Azlan, T. Manoharan, H. Zainuddin, J. Basiron, M.K.M. Nor, F.R. Ramli
39 Integrated recycle system concept for low cost 3D-printer sustainability
F.R. Ramli, M.I. Jailani, H.Unjar, M.R. Alkahari, M.A. Abdullah
40 Forward-chaining approach to expert system for machine maintenance
S.N. Mohamad, A.Y. Bani Hashim
41 Decoding wrist gesture with combinational logic for the development of a practical EMG electrode sleeve
Z. Fu, A.Y. Bani Hashim, Z. Jamaludin, I.S. Mohamad
42 Application of defect detection in gluing line using shape-based matching approach
Mohamad Haniff Harun, Khalil Azha Mohd Annuar, Aminurrashid Noordin, Mohd Hanif Che Hasan, Muhammad Salihin Saealal, Mohd Firdaus Mohd Ab Halim, Muhammad Fareq Ibrahim
43 Investigation of sway angle characteristics in gantry crane system by PSD analysis
S.Y.S. Hussien, R. Ghazali, H.I. Jaafar, C.C. Soon
44 Hopping peak height algorithm for a one legged robot hopping height control
A.H. Azahar, S.H. Chong, A.M. Kassim
45 Experimental investigation on the road transmitted vibration of a mountain bicycle
A.Y. Ismail, M.F.A.M. Shukri, M.A.A. Johari
46 Investigation on reed Imperata Cylindrica as sound absorber
F.A. Khair, A. Putra, M.J.M. Nor, N. Atiqah
47 Fundamental model of structure-borne vibration transmission in building using portal frame approach
Y.M. Cheah, A. Putra, N. Muhammad, R. Ramlan
48 Preliminary study on sound absorption of natural kenaf fiber
Z.Y. Lim, A. Putra, M.J.M. Nor, M.Y. Yaakob
49 Mobility of rectangular plate with constraint and unconstraint edges
K.H. Lim, A. Putra, R. Ramlan
13 Mechanical Engineering Research Day 2015
Poster No.
Title Author(s)
50 Oil palm empty fruit bunch fibers as sustainable acoustic material
K.H. Or, A. Putra, M.Z. Selamat
51 Reciprocity method in small acoustic space to measure sound radiation from baffled perforated plates
N. Shyafina, A. Putra, Z.Y. Lim, N. Muhammad
52 Double layered micro-perforated panel as acoustic absorber in mosque.
D. Hafizah, A. Putra, M.J.M. Noor, M.S. Py
53 Noise analysis in Malaysian passenger car cabin
M.A. Abdullah, J.F. Jamil, N. Basrah, A. Putra, M.A. Salim
54 Variability of vibration input power to a beam structure
N.F. Saari, A. Putra, H. Bakri, R. Md Dan.
55 Analysis on degree of nonlinearity in hardening nonlinear system of a vibration based energy harvesting device
P.S. Low, R. Ramlan, N.S. Muhammad, H.A. Ghani
56 Study on corrosion features analysis for visual inspection & monitoring system: A NDT technique
Syahril Anuar Idris, Fairul Azni Jafar, Nurhidayu Abdullah
57 Comparison of camera calibration method for a vision based mesoscale measurement system
A.R.K. Anuar, H. Hanizam, S. Mohd Rizal, N. Nazrul Anuar
58 Analysis of body dynamic posture to detect body discomfort by using a webcam and python image histogram
N.S.A Ramdan, A.Y. Bani Hashim, Seri Rahayu Kamat, Siti Azirah Asmai
59 Development of innovation in Malaysian traditional palm sugar cooking machine
R. Hasan, S.A. Shamsudin, N. Muhammad, N. Tamaldin, H. Ali, M.I. Jaafar, T.E. Tengku Mansor, F.Z. Zainuri, N.S.A. Abdul Razak
60 A humanoid robot for autism rehabilitation: Does IQ influence response in child-robot interaction?
S. Shamsuddin, H. Yussof, F.A. Hanapiah, S. Mohamed
61 A comparative study for concrete strength prediction using Fuzzy modeling and Neuro-Fuzzy modeling techniques
S.S. Syed Ahmad
62 Low-NOX combustion of biogas from palm oil mill effluent using flameless combustion
Afiqah Hamzah, Abuelnuor Abdeen Ali Abuelnour, Mazlan Abdul Wahid
14 Mechanical Engineering Research Day 2015
Poster No.
Title Author(s)
63 Engineering design on food waste composting bin
S.N. Khalil, K A. Zulkifli
64 Binary mixture of the decanter cake and fiber from the oil palm industry waste as a potential solid fuel
Mohd Haizal Mohd Husin, Ting Sze Choi, Nur Haziqah Mohd Ruzmi, Imran Syakir Mohamad
65 Study the performance of single cylinder spark ignition engine for gasoline and compressed natural gas
M.Z. Yunus, M.T. Musthafah, M.Z. Akop
66 Performance and emission characteristics of castor blends biodiesel in single cylinder diesel engine dynamometer
Mohd Zaini Jamaludin, Safarudin Gazali Herawan,Yusmady Mohamed Arifin
67 Hardware design multi-sources light electric vehicles
F.A. Azidin, Z.A. Ghani, M.A. Hannan, Azah Mohamed
68 On the dynamics of a beam-SDOF energy harvester system
S. Susilo, A. Putr a, K.S. Leong, M.J.M. Nor
69 Relationships derived from physical properties of waste cooking oil / diesel blends and biodiesel fuels
M.I. Ali, J. Faezah
70 Broadening the bandwidth of energy harvesting devices by using different magnet configurations
H.A. Ghani, R. Ramlan, M.J.A. Latif, P.S. Low
71 Analytical work of honeycomb based on single ring hexagonal ring subjected to quasi-static lateral loading
M.R. Said, A.J. Chuli
72 The evaluation of machinability and surface roughness in conventional vertical milling machine
M.A.M. Daud, W.T. Ng, D.L. Sivakumar, M.Z. Selamat
73 Study on surface diffusion of an effective powder-pack boronizing
N.H. Omar, R. Hasan, S.M.M. Shahidan, N.R. Morjani, M.H. Kamaludin
74 Comparative study of surface roughness in milling AISI D2 steel using PVD coated and uncoated tungsten carbide insert
B.I. Redzuwan, M.S.A. Aziz, M.F. Ayub, M.S. Kasim, R. Izamshah, M. Amran
15 Mechanical Engineering Research Day 2015
SPONSORSHIP
TAAT BESTARI Sdn. Bhd.
HA Mega Supply
Centigrade Continental Enterprise
16 Mechanical Engineering Research Day 2015
NOTES
Recommended