Stop the SHOCKW-Technologies Hydraulic Shock Dampers

Who Needs Shock Dampers?

Anyone Blanking, Punching or Die Trimming

Why do You Need Shock Dampers?

To Reverse the Shocks of Presses

To Prevent Premature Die Wear

To Reduce Mechanical Failures

To Extend Press Life Three to Five Times Longer

That’s Right It Can BeThree to Five Times Longer

cWhat Are Hydraulic Shock

Dampers?

• A simple hydraulic cylinder with external pressure adjustment.

• Each component working seamlessly together to give every press a smoother and longer life.

c

A Powerful Tool that– Reverses Break Through Shock– Absorbs Shocks Without Derating

Presses

What Are Hydraulic Shock Dampers?

Reversing The LoadSee How Shock Dampers can Reverse the Load and

Save the Machine from shocks

Are They Easy To Install?

“It’s no more difficult than setting up tooling inside a press”

cIs the Pressure Easy to Adjust?

As Easy as Turning an Allen Wrench

What are the advantages of external adjustment control?– You can adjust tonnage capacity with each cylinder

externally– Cylinders can be adjusted quickly to fit any new

tonnage requirements on existing or different presses

What To Expect After Installation• Dramatic Reduction in Noise• Reduced Mechanical and Hydraulic Press

Failures• Improved Operator’s Ergonomics• Presses Can Be Off Center Loaded• Can increase Blanking Capacity to 95% of Press

Capacity• Increased Production Speed

W-Technologies Guarantee

We back our products with 100% satisfaction guarantee. If the hydraulic dampers do not meet customer satisfaction, all financial obligation is

cancelled and returned.

Contact W-Technologies Today

Phone: 618-263-4385Fax: 618-262-8934

lcockrum@w-tech.biz1001 Market Street Ste 206

Mt. Carmel, IL 62863http://www.w-tech.biz