MOTOTRBO Release 2.443

MOTOTRBO MOBILE HANDHELD CONTROL HEAD (HCH)

MOTOTRBO Release 2.444

Designed for vehicles with limited spacefor mobile installations

• Transceiver can be mounted remotely• User has control of all radio functions

PLMN7131 kit consists of:• handheld control head and clip• radio adapter module• 5.9 ft long coiled cord (can stretch to 9.8 ft)

PMKN4174 extension cable adds 16.4 ftand gives the user flexibility to moveInside and outside the vehicle (deliveryvan, ambulance, utility truck, etc)

Compatible only with Color display mobile

Operates in all system topologies,including Connect Plus

Mobile Handheld Control Head (HCH)

MOTOTRBO Release 2.445

.

MOTOTRBO HAND HELD CONTROL HEAD (HCH)Item No. Description

1 LED INDICATORS ‐ Red2 LED INDICATORS ‐ Yellow3 LED INDICATORS ‐ Green4 CHANNEL UP5 CHANNEL DOWN6 POWER BUTTON7 PROGRAMMABLE SIDE BUTTON 1*8 PUSH‐TO‐TALK (PTT) BUTTON9 PROGRAMMABLE SIDE BUTTON 2*10 PROGRAMMABLE SIDE BUTTON 3*11 5‐LINE COLOR LCD (132x90 ) DISPLAY12 MICROPHONE13 PROGRAMMABLE FRONT BUTTON P1*14 MENU/OK BUTTON15 VOLUME BUTTON DOWN16 PROGRAMMABLE FRONT BUTTON P3*17 PROGRAMMABLE FRONT BUTTON P4*18 FULL KEYPAD19 VOLUME BUTTON UP20 SPEAKER21 BACK/HOME BUTTON22 PROGRAMMABLE FRONT BUTTON P2*23 4 WAY NAVIGATION BUTTON

Item No. Description1 PROGRAMMING PORT2 HANDHELD CONNECTOR PORT

MOTOTRBO Release 2.446

1. HCH will take exclusive control of volume, so accessory “volume control” is NOT supported, regardless of CPS selection

2. Mobile Microphone Port is not available with HCH, so the following are NOT supported:

• Front Data Accessory and Front PC & Audio in Radio Menu• USB Human Input Device (HID) for Barcode scanner, etc.

3. Dual Functionality Rotary Knob – NOT supported

4. for HCH mode uses “Welcome Image” bitmap with 132 pixel (width) x 90 pixel (height) size(vs standard Mobile 160 x 72 )

CPS – Features NOT supported