Kenwood Catalogue

TK-2180/3180VHF/UHF FM Portable Radios

WIDE BAND COVERAGE

5 WATT UHF & VHF MODELS

EXTRA LARGE CHANNEL CAPACITY

DUAL PRIORITY SCAN

DOT MATRIX DISPLAY

ENHANCED KENWOOD AUDIO

VOX READY

VOICE INVERSION SCRAMBLER

FleetSync® / FleetSync® II

5-TONE SIGNALLING

LONE WORKER

TRANSPARENT DATA MODE

QT / DQT / DTMF

VGS-1 VOICE GUIDE & STORAGE UNIT (OPTION)

EASY OPTION PORT (26-PIN)

tk2180_3180uk.qxd 5/24/05 6:52 PM Page 2

WIDE BAND OPERATION

The TK-2180/3180 models feature wide bandUHF (70 MHz) and VHF (38 MHz) coverage inone radio model.

NEW CONCEPT DESIGN

Kenwood employed premium industrialdesign concepts to make the TK-2180/3180portables functionally practical, rugged andan attractive piece of equipment to carry.

T K - 2 1 8 0 / 3 1 8 0V H F / U H F F M P o r t a b l e R a d i o s

DOT MATRIX DISPLAY

The backlighting andhigh-resolution dotmatrix 12-characteralphanumeric displayprovides easy-to-read channel aliases day or night. Also a 3-digit sub-display forzone/channel numbers and icons for function/status indicators make for intuitiveoperation. The display can be dealer customised for indication in languagesother than English.

KENWOOD ‘‘K’’LARITY — ENHANCED AUDIO

Kenwood utilizes its long standing audioheritage to optimize voice frequency components so that the audio output cutsthrough typical ambient noise. Thisenhancement and the companded noisereduction provide clarity and low distortion.

MEETS/EXCEEDS MIL-STDBLOWING RAIN & IP54/55

The TK-2180/3180 is built to survivethe hard knocks, drops and harshweather environments of its users.It meets or exceeds the stringentIP54/55 dust and water protection standards and theMIL-STD 810 C, D, E & F environmental standards including the demanding “blowing rain” test.

VOICE INVERSION SCRAMBLER

The built-in voice inversion scrambler providesbasic communications protection againstcasual eavesdropping.

VOX READY

The TK-2180/3180 offers convenienthands-free operation with a compatibleheadset. The TK-2180/3180 internal VOX(voice-operated transmission) circuitry provides automatic PTT and a 10-levelsensitivity adjustment for different ambientnoise levels.

Meets the next generation in professional handheld communicationsKenwood’s TK-2180/3180 defines a bold new standard for portable radio

performance, scoring high marks for operating ease, versatility and reliability.

EXTRA LARGE CHANNEL CAPACITY

The large 512 channel / 128 zone capability*accommodates virtually any current or futurecapacity requirement.

*Maximum capacity notes128 Conventional Zones cumulative maximum per radio

512 Conventional Channels cumulative maximum perradio

250 Channels maximum per any Conventional Zone

tk2180_3180uk.qxd 5/24/05 6:52 PM Page 3

Outstanding Features

FleetSync® & FleetSync® II Kenwood’s FleetSync® digital signalling system includes PTT IDdigital ANI for instant radio call identification and Emergencystatus for personnel safety. FleetSync also includes status messaging, selective calling and short/long text dispatch messaging features. The TK-2180/3180 supports either originalFleetSync® or FleetSync® II*.

* FleetSync and FleetSync II are incompatible.

DUAL PRIORITY & VARIOUS SCANNING FUNCTIONSDual-Priority Scan automatically checks two important channelsfor activity while channel scanning. Also, each radio can be programmed to scan any organization of channels and talk groupsusing the many programmable scan features and parameters.

5-TONE SIGNALLINGIn addition to FleetSync®, the TK-2180/3180 includes the industrystandard signalling formats: QT/DQT, DTMF and 5-tone. In particular, 5-tone signalling has been significantly enhanced forgreater flexibility, and current users of this format will welcomethe fact that it can be used in combination with FleetSync® forShort/Long Text Messaging.

AVAILABLE SOFTWARE (OPT.)ZVEI-Digital signalling and a voting function that utilizes the signalling can be added as optional software.

VOICE GUIDE & STORAGE* (OPT.)This innovative Kenwood option makes several functions possible.‘‘Voice Guide’’ announces channel, zone, feature activation/deactivation, etc. in a clear synthesised voice. ‘‘Voice Storage’’records up to 300 seconds of receive audio for missed calls oryour own voice for memo recording. It also has an ‘‘Auto-Reply’’greeting and can record voice messages for unattended radioswhile away from the radio or while in a meeting (the calling unitmust send a FleetSync® selective call for activation).

* Announcement only available in English.

EASY OPTION PORT (26-PIN)Kenwood’s plug-in option port enablesinstallation of the external boards suchas the VGS-1 Voice Guide and StorageUnit quick and simple.

REAL-TIME CLOCK FOR TIME STAMPINGA new Kenwood feature, this real-time clock can be used for basictime-stamping.

LONE WORKERThis ingenious feature provides an extra layer of security andsafety for individuals who work remotely as well as for thosewho work in hazardous areas. As long as the buttons arepressed regularly, the radio operates normally; however, if thereis a long lapse (programmable), it will sound an alert. In theabsence of further response from the user, the TK-2180/3180will place an emergency call to a pre-determined person orgroup of people.

TRANSPARENT DATA MODEKenwood’s Transparent Data mode works in combination withFleetSync® to enable full character transparency for exchangingdata with a transceiver linked to a PC or peripheral equipment.This can be used for remote control and remote maintenance ofstatus monitoring, etc.

OTHER FEATURES 5-WATT UHF & VHF MODELS BATTERY STATUS INDICATOR PROGRAMMABLE FUNCTION KEYS EMERGENCY KEY WIDE/NARROW PER CHANNEL RSSI LEVEL INDICATOR EMBEDDED MESSAGES TRANSCEIVER PASSWORD FLASH MEMORY WINDOWS PC PROGRAMMING & TUNING QT/DQT & DTMF

T K - 2 1 8 0 / 3 1 8 0V H F / U H F F M P o r t a b l e R a d i o s

tk2180_3180uk.qxd 5/24/05 6:52 PM Page 4

CL589E-E-4

All accessories and options may not be available in all markets. Contact an authorized Kenwooddealer for details and complete list of all accessories and options.

SpecificationsTK-2180 E TK-3180 E

GENERALFrequency Range 136-174 MHz 400-470 MHzNumber of Channels* Max. 512 Ch’s total per Radio

Zone Max. 128 per RadioCh Max. 250 per Zone

Channel Spacing 25 kHz/20 kHz/12.5 kHzBattery Voltage 7.5 V DC ± 20 %Battery Life (5-5-90 duty cycle, during hi-power)

with KNB-31A (1700 mAh) Approx. 9 hourswith KNB-32N (2500 mAh) Approx. 14 hourswith KNB-33L (1700 mAh) Approx. 10 hours

Operating Temperature Range** -30 °C ~ +60 °CFrequency Stability ±2.5ppm (-30 °C ~ +60 °C)Antenna Impedance 50 ΩChannel Frequency Spread 38 MHz 70 MHzDimensions (W x H x D), Projections not included

Radio Only 58 x 136 x 21.5 mmwith KNB-31A 58 x 136 x 39.5 mmwith KNB-32N 58 x 136 x 39.5 mmwith KNB-33L 58 x 136 x 33 mm

Weight (net)Radio Only 260 g (includes supplied accessories)with KNB-31A 530 g [with antenna (KRA-22/23) and belt clip (KBH-11)]with KNB-32N 560 g [with antenna (KRA-22/23) and belt clip (KBH-11)]with KNB-33L 400 g [with antenna (KRA-22/23) and belt clip (KBH-11)]

Applicable Standards EN300 086, EN300 113, EN300 219, EN301 489EN60065, EN60950-1, EN60215

TK-2180 E TK-3180 ERECEIVERSensitivity (EIA 12dB SINAD) 0.28 µV/0.28 µV/0.32 µVSensitivity (EN 20dB SINAD) -3 dB µV/-3 dB µV/-2 dB µV

25 kHz/20 kHz/12.5 kHzAdjacent Channel Selectivity 73 dB/73 dB/63 dB

25 kHz/20 kHz/12.5 kHzIntermodulation 65 dBSpurious Response Rejection 70 dBAudio Output (8 Ω impedance) 500 mW with less than 3 % distortionMeasurement EN StandardsTRANSMITTERRF Power Output

High 5 WLow 1 W

Modulation Limiting ±5.0 kHz at 25 kHz±4.0 kHz at 20 kHz±2.5kHz at 12.5 kHz

Spurious Emission -36 dBm ≤ 1 GHz, -30 dBm > 1 GHzFM Noise (EIA) 45 dB/45 dB/40 dBModulation Distortion Less than 3%Microphone Impedance 2 kΩMeasurement EN standards

Kenwood reserves the right to change specifications and features without prior notice.FleetSync® is a registered trademark of Kenwood Corporation.

Applicable MIL-STD & IPStandard MIL 810C MIL 810D MIL 810E MIL 810F

Methods/Procedures Methods/Procedures Methods/Procedures Methods/ProceduresLow Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, IIHigh Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, IILow Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, IITemperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, IISolar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure IRain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, IIIHumidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, IIIVibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure IShock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IVInternational Protection StandardDust & Water Protection IP54/55

*Maximum capability depends on the number of programmed Zones and repeater channels.**Operating temperature range of the KNB-32N/33L: -10 °C ~ +60 °C

JQA-QMA1205

Options

KNB-31ANi-Cd Rechargeable Battery Pack (1700 mAh)

KNB-32NNi-MH Rechargeable Battery Pack (2500 mAh)

KNB-33LLi-ion Rechargeable Battery Pack (1700 mAh)

KSC-32Tri-chemistry Rapid Charger

VGS-1Voice Guide & Storage Unit

KRA-22 VHF Low Profile Helical Antenna

KRA-23 UHF Low Profile Helical Antenna

KRA-26VHF Helical Antenna

KRA-27UHF Whip Antenna

KMC-25 Speaker Microphone

KEP-1Heavy-duty Earphone

KHS-11BL2-Wire Palm Mic with Earphone

KHS-12BL3-Wire Mini Lapel Mic with Earphone

KHS-14Lightweight Single Muff Headset

KHS-15-OHHeavy-duty Over-the-Head Headset

KBH-11Belt Clip (2.5")

tk2180_3180uk.qxd 5/24/05 6:52 PM Page 1

TK-90HF TRANSCEIVER

Compact Rugged Design

300 Memory Channels

Single Head Remote Option

6 Programmable Function Keys

Enhanced Kenwood Audio

100W Transmit Power*

High-stability TCXO

Enhanced Security Features

Selective Call & Status Call

VGS-1 Voice Guide and Storage Option

GPS & Voice Scrambler Port

Data Modem Port

KPE-2 MIL-STD Automatic Link Establishment Option

MIL-STD 810 & IP54* SSB/CW/FSK modes

tk90_k.qxd 07.3.8 11:56 Page 2

T K - 9 0H F T R A N S C E I V E R

All-Terrain HF – The TK-90 Takes On All Challenges

Kenwood’s TK-90 is a high-performance HF Transceiver designed to provide user-friendly operation wherever and whenever you need

reliable communications. Highly compact design,advanced features and remote control head option make it ideal

for mobile and base station applications.

6 programmable backlit keys customize the unit to the specificneeds and features of the operator day or night.

Enhanced Kenwood Audio optimizes voice frequency components for greater audio quality and clarity in even the mostchallenging ambient noise conditions and HF applications.

Powerful, tough and reliable

100W heavy-duty TX* provides the punch for long-distancecommunications. The twin cooling fans and the enhanced heatsink dissipation characteristics mean reliable, stable transmissionperformance hour after hour.*100% duty for 30mins at 25°C, 25% duty continuous operation.

Compact and easy to use

Extremely small dimensions mean the TK-90 is transportableand installation-friendly for vehicles and base stations. The low-power settings facilitate battery- and solar-powered usage inthe field.

300 memory channel capacity provides for custom operationand monitor frequency settings. Each channel has a programmable 12-character alphanumeric name for user-friendlychannel selection via the backlit LCD.

The KRK-5 Remote Control Head option makes vehicularinstallation in any type vehicle possible. The control head can bemounted up to 7.6 meters from the transceiver unit mountedsecurely out of sight and out of the way under a seat, in the trunkor other compartment.

The wide viewing angle of the LCD panel makes operation easyfrom any position.

tk90_k.qxd 07.3.8 11:56 Page 3

T K - 9 0H F T R A N S C E I V E R

Easy-installation port accommodates the optional VGS-1 unit,aftermarket GPS receiver boards or voice scrambler boards.

Data port connects external radio data modems (KCT-39 accessory interface cable option required). The KCT-39 auxiliaryinputs/outputs can also be used for sensor inputs or to controlexternal equipment.

DSP controlled Automatic Link Establishment (ALE) functionsprovided by the KPE-2 option establish automatic optimum channel links between units rather than operators searching for afrequency under varying atmospheric and noise conditions.

OTHER FEATURES LCD Brightness Control (HI/LOW/OFF) Preferred & Normal Scan Minimum Volume Settings Direct Channel Access Flash ROMUpgradeable Frequency Direct Entry (KMC-32/36 required) Ignition Sense (KCT-18/39 cables required) Time-out Timer Wired Channel Clone Power-on Text Receiver Pre-Amp &Attenuator Noise Blanker Clarifier Front Panel SelfProgramming Windows® PC Programming PC Control (KCT-31required) VOX VFO Mode

Compliance with 6 MIL-STD specifications – including shock,vibration, dust, driven rain and salt fog – assures reliable performance under the toughest conditions. The cooling intake hasintegral dust protection and the remote control head meets IP54dust and water intrusion standards.

High-Stability TCXO ensures excellent frequency stability performance in most severe temperature environments.

Enhanced safety & security features include an emergencymode in all transmission modes – voice, CW, and Status Call.Status Call includes GPS positioning report (GPS interfaced boardrequired). Also, the TK-90 has a non-erasable electronic serialnumber, a password-protected rewriteable embedded messageand password-protected program data features for added securityand ownership protection. Other security features support a datapassword.

Versatile and expandable

Selective Call enables individual, group or open calling ideal fordistributed networks of HF transceivers with a silent standby feature for operators. The TK-90 Selcall is compatible with its predecessor model TK-80 and handles up to 999 IDs and with aprogrammable ID list to assign alphanumeric names to 100 IDs.

Status Call provides up to 70 pre-canned status numbers for simple non-voice messaging and a 50 status number list with programmable alphanumeric names that provides a user-friendlydisplay of the status message.

The optional VGS-1 Voice Guide and Storage Unit offers anaudible announcement of channel numbers. Voice Storage provides four 15-second memory banks for recording memos andoutgoing messages; it can also record incoming messages –15sec. x 2 channels – for unattended response (the calling unitmust send a status call for activation). Additionally, a convenientcontinuous recording function means you can always play backthe last 30 seconds of reception for confirmation.

ALE function as per MIL-STD 188-141B APPENDIX A and followingfunctions are available

1. Sounding (Automatic / Manual)

2. Individual Call, Net Call, All Call

3. Automatic Message Display (AMD)

4. Additional ALE 100 MemoryChannels

tk90_k.qxd 07.3.8 11:57 Page 4

CL612K-E-4

JQA-QMA1205

Options

All accessories and options may not be available in all markets. Contact an authorizedKenwood dealer for details and complete list of all accessories and options.

KES-3 External Speaker

KMC-30 Microphone

KMC-32 16-key Microphone

KMC-35 IP54/55 Rated Microphone

KMC-36 IP54/55 Rated 12-key Microphone

KRK-5 Single Control Head Remote Kit

KCT-22 MRemote Control Cable (2.4m/8 ft)

KCT-22 M2 Remote Control Cable (5.2m/17 ft)

KCT-22 M3 Remote Control Cable (7.6m/25 ft)

PG-20 DC Cable (7m/23 ft)

KLF-2 Line Filter

KMB-9 Mounting Bracket

KMB-10Key Lock Adapter

PS-53 DC Power Supply

KAT-1 External Automatic Antenna Tuner (single wire output)

KCT-18 Ignition Sense Cable (KCT-39 required)

KCT-31 Interface Cable for PC Connection

KCT-39 Connection Cable

VGS-1 Voice Guide & Storage Unit

KIF-2 SSB Filter (2.7 kHz Bandwidth)

YF-107C CW Filter (500 Hz Bandwidth)

KPE-2 ALE Unit


Methods/Procedures Methods/Procedures Methods/Procedures Methods/ProceduresLow Pressure 500.1/I 500.2/I, II 500.3/I, II 500.4/I, IITemperature Shock 503.1/I 503.2/I 503.3/I 503.4/I, IISolar Radiation 505.1/I 505.2/I 505.3/I 505.4/IRain / Blowing Rain *1 506.1/I, II 506.2/I, II 506.3/I, II 506.4/I, IIIHumidity 507.1/I, II 507.2/II, III 507.3/II, III 507.4Salt Fog *1 509.1/I 509.2/I 509.3/I 509.4Dust *1 510.1/I 510.2/I 510.3/I 510.4/I, IIIVibration 514.2/VIII, X 514.3/I 514.4/I 514.5/IShock 516.2/I, II 516.3/I, V 516.4/I, V 516.5/I, VInternational Protection StandardDust & Water Protection *1 IP54

Kenwood has always connected with people through sound. Now we want to expand the world of sound in ways that only Kenwood can,listening to our customers and to the pulse of the coming age as we head toward a future of shared discovery, inspiration and enjoyment.

*1 Remote Panel Only

SpecificationsTK-90

GENERALTX Frequency Range 1.8 ~ 30.0 MHz*1

RX Frequency Range 0.5 ~ 30.0 MHzNumber of Channels 300 ChannelsEmission Type J3E, J2B*2 (SSB)

A1A (CW)A3E (AM)F1B (FSK)

Operating Temperature -20°C ~ +60°COperating Voltage 13.6V±15%Frequency Stability ±0.5ppm (-10°C ~ +50°C)

±1.0ppm (-20°C ~ +60°C)Current Drain 20.5A (TX)

1.2A (Stand-by)Antenna Impedance 50 ΩDimensions (W x H x D) Projections not included

Radio only 179 x 60 x 276 mmRemote Panel 179 x 60 x 58 mm

Weight 3.5 kg

TK-90RECEIVERSensitivity

SSB/CW/FSK 4 µV (0.5 ~ 1.605 MHz)0.25 µV (1.605 ~ 30.0 MHz)

AM 32 µV (0.5 ~ 1.605 MHz)2.5 µV (1.605 ~ 30.0 MHz)

SelectivitySSB/CW/FSK 2.2 kHz (-6dB)

4.8 kHz (-60dB) With KIF-2 2.7 kHz (-6dB)

6.2 kHz (-60dB) AM 5.0 kHz (-6dB)

40.0 kHz (-60dB) Spurious Response

IF Image Rejection 70 dBIF Rejection 80 dB

Audio Output 3.5 W (4 Ω / 10% distortion)TRANSMITTERRF Power Output

SSB/CW/FSK 100 W / 50 W / 25 W / 5 WAM 25 W / 5 W

Spurious Emission -46 dBCarrier Suppression 40 dBUnwanted Sideband Suppression 50 dB (1.0 kHz tone)Microphone Impedance 600 Ω

Kenwood reserves the right to change specifications and features without prior notice.Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.

*1 Guarantee Frequency : 1.8 ~ 2.4 MHz / 3.5 ~ 4.5 MHz / 6.0 ~ 8.0 MHz / 11.0 ~ 14.5 MHz / 16.0 ~ 21.5 MHz / 24.0 ~ 30.0 MHz*2 ALE mode

tk90_k.qxd 07.3.8 11:56 Page 1

Options

All accessories and options may not be available in all markets. Contact an authorized Kenwood dealer for details and complete list of all accessories and options.

CL694M-E-2


JQA-QMA1205

KNB-63L Li-Ion Battery (7.2V, 1,100 mAh)

KSC-35S Regular Charger

KRA-22 VHF Low Profile Helical Antenna

KRA-23 UHF Low Profile Helical Antenna

KRA-26 VHF Helical Antenna

KRA-27 UHF Whip Antenna


KMC-21 Compact Speaker Microphone

KHS-1 Headset with VOX/PTT

KHS-21 Headset

KWR-1 Water Resistant Bag

TK-2000 TK-3000 GENERAL Frequency Range Type 1 144 - 174 MHz 440 - 480 MHz Type 2 — 400 - 430 MHz Number of Channels 16 channels Channel Spacing Wide / Narrow 25 kHz / 12.5 kHz Channel Step 5, 6.25 kHz Operating Voltage 7.5 V DC ±20 % Battery Life (5-5-90 duty cycle, save off ) with KNB-63L Approx. 10 hours Operating Temperature -20°C ~ +60°C Frequency Stability 5 ppm 2.5 ppm Antenna Impedance 50 Ω Channel Frequency Spread 30 MHz 40 MHz Dimensions (W x H x D), Projections not Included Radio only 54 x 113 x 14 mm with KNB-63L 54 x 113 x 24.9 mm Weight (net) Body only Approx. 130 g with KNB-63L Approx. 203 g FCC ID Type 1 ALH437200 ALH437300 Type 2 — ALH437301 FCC Compliance Parts 15 / 90 Parts 15 / 90

TK-2000 TK-3000 RECEIVER Sensitivity (12 dB SINAD) Wide / Narrow 0.25 µV / 0.28 µV Selectivity Wide / Narrow 70 dB / 60 dB Intermodulation Distortion Wide / Narrow 65 dB / 60 dB Spurious Response 65 dB 60 dB Audio Distortion Less than 5 % Audio Output 500 mW / 8 Ω TRANSMITTER RF Power Output (High / Low) 5 W / 1 W 4 W / 1 W

Spurious Response 65 dB Modulation Wide / Narrow 16K0F3E / 11K0F3E FM Hum & Noise Wide / Narrow 45 dB / 40 dB Audio Distortion Less than 5 %

Measurements made per TIA/EIA 603 and specifications shown are typical.Kenwood follows a policy of continuous advancement in development.For this reason specifications may be changed without notice.

Windows® is a registered trademark of Microsoft Corporation.

To meet MIL810 and IP54, the 2-pin connector cover has to be connected.

Specifications

Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810G Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I Rain 506.1/Procedure II 506.2/Procedure II 506.3/Procedure II 506.4/Procedure III 506.5/Procedure III Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure II Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5 Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV 516.6/Procedure I, IV

International Protection Standard Dust & Water Protection 　IP54

Applicable MIL-STD & IP

tk2000_3000_m.indd 2tk2000_3000_m.indd 2 10/10/01 12:1310/10/01 12:13

TK-2306/3306Compact VHF/UHF FM Portable Radios

CCOOMMPPAACCTT DDEESSIIGGNNThe rounded ergonomic contours of the TK-2306/3306 naturally provide a superbly comfortable hold, while the non-slip elastomerchannel knob with improved torque characteristics and enlarged PTTbutton ensure a positive tactile response during operation.

TTOOUUGGHH && WWAATTEERRPPRROOOOFFBuilt tough to take rough treatment in stride, the TK-2306/3306 haspassed the demanding IP54/55 dust and water intrusion tests, bothwith and without the KMC-45 optional speaker microphone. It alsomeets or exceeds 11 stringent MIL-STD 810 C/D/E/F environmentalstandards, including “driven rain”. So whatever the weather, the TK-2306/3306 is ever ready for action.

EENNHHAANNCCEEDD AAUUDDIIOO QQUUAALLIITTYYClear audio means confident communications, but power output is notthe only factor that determines how easy it is to use a radio in varyingnoisy environments. As an experienced audio specialist, Kenwood candraw on decades of expertise at every step: component selection,construction, optimization, evaluation and analysis. The resulting audioperformance, specially engineered for transceivers, is undeniably clearerand crisper. Just listen to the difference.

MMUULLTTIIPPLLEE SSIIGGNNAALLIINNGG

QQTT//DDQQTT//DDTTMMFF:: The radio's encoder/decoder function usesQT/DQT to segregate talk groups so you only hear calls from yourown group. DTMF PTT ID is included for dispatch operations or forsimple remote control applications. The DTMF decode capabilitiesinclude selective call ID, transpond with ID, “wild card” group calling, and radio stun.

FFlleeeettSSyynncc®® PPTTTT IIDD,, SSEELLCCAALLLL && EEMMEERRGGEENNCCYY:: UtilizingKenwood's FleetSync® digital signaling protocol, the TK-2306/3306 features PTT ID (ANI: automatic number identification) and SelectiveCalling capabilities for managed dispatch operations. For hazardous/hostile duty environments, a PF key can be programmed for Emergencystatus to alert the dispatcher and/or operator in distress.

BBUUIILLTT--IINN MMDDCC--11220000 SSIIGGNNAALLIINNGG:: The TK-2306/3306 is alsoequipped with an MDC-1200 signaling protocol encoder/decoder for usewith MDC-1200 dispatch operations. Features include PTT ID encode,emergency encode, stun/revive decode, and radio check decode.

FFoorr cclleeaarr,, rreelliiaabbllee ccoommmmuunniiccaattiioonnss iinnddoooorrss oorr oouutt,, rraaiinn oorr sshhiinnee,, tthheerree''ss nnoo

bbeeaattiinngg KKeennwwoooodd''ss ccoommppaacctt TTKK--22330066//33330066 ttrraannsscceeiivveerr.. BBaasseedd oonn aa pprroovveenn

ddeessiiggnn,, bbuutt rreeffiinneedd aanndd uuppddaatteedd wwiitthh eennhhaanncceedd ffeeaattuurreess,, iitt hhaass tthhee ppoowweerr

aanndd ppeerrffoorrmmaannccee ttoo ssaattiissffyy eevveenn tthhee ttoouugghheesstt jjoobb rreeqquuiirreemmeennttss,, dduuee iinn ppaarrtt

ttoo tthhee MMIILL--SSTTDD 881100 && IIPP5544//5555 wweeaatthheerr--pprrooooffiinngg.. AA mmooddeell ooff eerrggoonnoommiicc

eexxcceelllleennccee oonn tthhee oouuttssiiddee,, iinnssiiddee iitt''ss ppaacckkeedd wwiitthh ssuucchh ffeeaattuurreess aass pprriioorriittyy

ssccaann,, bbuuiilltt--iinn VVOOXX aanndd aa vvooiiccee ssccrraammbblleerr.. NNoo wwoonnddeerr tthhee ssmmaarrtt nneeww

TTKK--22330066//33330066 iiss aattttrraaccttiinngg ssuucchh aatttteennttiioonn..

PPaacckkaaggee iinncclluuddeess bbaatttteerryy,, cchhaarrggeerr aanndd aanntteennnnaa..

PPRROOGGRRAAMMMMAABBLLEE FFUUNNCCTTIIOONN KKEEYYSSThe two PF Keys can be programmed for any of the many functions available on the TK-2306/3306, permitting a customized fit for yourrequirements. Either key can also be programmed for an Emergency function – transmitting a help signal to a predetermined person or groupusing DTMF, FleetSync® or MDC-1200 signaling.

LLOONNEE WWOORRKKEERRThis ingenious feature provides an extra layer of security for individualswho work in remote or hazardous areas. As long as the buttons arepressed regularly, the radio operates normally. However, if there is a longlapse (programmable), it will sound an alert. And if the user does notrespond to the alert, the TK-2306/3306 will place an emergency call to apredetermined person or group.

RRAADDIIOO SSTTUUNNThis function disables a lost or stolen radio over the air, eliminating security risks.

VVOOIICCEE AANNNNUUNNCCIIAATTIIOONNThe rotary and key controls on the radio can provide voice confirmation ofradio status or operating mode, which is convenient when you are not able tolook at the TK-2306/3306 – for example, if it's in your pocket. English is thedefault language, but you can switch to Russian, French, Spanish or Chinese.

IINNDDEEPPEENNDDEENNTT SSEETTTTIINNGGSS PPEERR CCHHAANNNNEELL ((VVOOXX,, CCOOMMPPAANNDDEERR,, SSCCRRAAMMBBLLEERR))Radio channels can be programmed* independently for VOX, scramblerand compander functions. This means you can switch a function on or offsimply by changing channels (on the same frequency).

1166 CCHHAANNNNEELLSSThe TK-2306/3306 provides ample capacity for operating with multiple channels or radio systems.

BBUUIILLTT--IINN VVOOIICCEE--IINNVVEERRSSIIOONN SSCCRRAAMMBBLLEERRThe voice-inversion scrambler provides basic protection against casualeavesdropping.

VVOOXX RREEAADDYYEnjoy the convenience of hands-free operation using any optional headset.Offering a 10-level sensitivity adjustment, the internal VOX (voice-operatedtransmission) function automatically activates PTT when you start talking.This is great for specialized tasks or events that require hands-free,constant or repetitive communications.

AALLLL--IINN--OONNEE PPAACCKKAAGGEEThe TK-2306/3306 is ready to use right out of the box. It comes withantenna, rechargeable battery and battery charger. A handy belt-clip is alsoprovided. No extra accessories are needed for basic operation.

OOTTHHEERR FFEEAATTUURREESS• Read/Write Password Protection • Wide/Narrow per Channel • Companded Audio per Channel • Talk Around • B.C.L. (Busy ChannelLockout) • Key Lock • 3-color LEDs (red, orange, green) • Scan Del/Add• KENWOOD ESN (Electronic Serial Number) • Adjustable MicrophoneGain (by FPU): High or Normal • Microsoft Windows® PC Programming & Tuning

*By the dealer

TK2306.qxd 17/9/08 12:22 Page 1

CL637E-E-2


JQA-QMA1205

TK-2306 TK-3306GGEENNEERRAALLFrequency Range

Type M 136 - 174 MHz 450 - 490 MHzType M3 — 400 - 430 MHz

Number of Channels Max.16Channel Spacing

Wide / Narrow 25 kHz / 12.5 kHzBattery Voltage 7.5 V DC ±20 %Battery Life (5-5-90 duty cycle, during hi-power battery saver: OFF/ON)

with KNB-29N (1500 mAh) Approx. 10 hours / 14 hourswith KNB-30A (1100 mAh) Approx. 9 hours / 11 hours

Operating Temperature Range* -30°C ~ +60°CFrequency Stability ±2.5 ppm (-30°C ~ +60°C)Antenna Impedance 50 ΩDimensions (W x H x D), Projections not Included

with KNB-29N / 30A 54 x 122 x 3.8 mmWeight (net)

Radio only 160 gwith KNB-29N 360 gwith KNB-30A 340 g

TK-2306 TK-3306RREECCEEIIVVEERRSensitivity

EIA 12 dB SINAD 0.25 µV / 0.28 µV

Wide / NarrowAdjacent Channel Selectivity

Wide / Narrow 70 dB / 60 dBIntermodulation

Wide / Narrow 65 dB / 60 dBSpurious Response Rejection 65 dB 60 dBAudio Output (8 Ω impedance) 500 mW with less than 10 % distortionMeasurement TIA / EIA-603

TTRRAANNSSMMIITTTTEERRRF Power Output (High/Low) 5 W / 1 W 4 W / 1 W

Modulation Limiting ±5.0 kHz at 25 kHz

±2.5 kHz at 12.5 kHz

Spurious Emission 65 dB

Modulation

Wide / Narrow 16K0F3E / 11K0F3E

FM Noise (EIA)

Wide / Narrow 45 dB / 40 dB

Modulation Distortion Less than 5 %

Microphone Impedance 2 kΩ

Measurement TIA / EIA-603

Kenwood follows a policy of countinuous advancement in development.For this reason specifications may be changed without notice.FleetSync® is a registered trademark of Kenwood Corporation.Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.

SSppeecciiffiiccaattiioonnss

KNB-29NNi-MH Battery Pack (1500 mAh)

KNB-30A Ni-Cd Battery Pack (1100 mAh)

KSC-31 Rapid Chargerfor KNB-29N/30A

KSC-316 6 Pocket Multiple Chargerfor KNB-29N/30A

KRA-22/23VHF/UHF Low Profile Helical Antenna

KRA-26/27VHF/UHF Whip Antenna

KMC-45Speaker Microphone

KMC-21Compact Speaker Microphone

KEP-2 Earphone Kit (2.5 mm plug)

KHS-1Headset with VOX/PTT

KHS-7Single-Muff Headset

KHS-7ASingle-Muff Headsetwith In-Line PTT

KHS-8BL/BE2-Wire Palm Microphone (Black/Beige)

KHS-9BL/BE3-Wire Lapel Microphone with Earphone (Black/Beige)

KHS-10-BH/OHNoise-Reduction Headset with Noise-Cancelling Microphone

KHS-21Headset

KHS-22Lightweight Headset with Boom Mic./PTT

KWR-1Water Resistant Bag

KBH-10Belt Clip

KLH-120Leather Case

KLH-131Nylon Case

OOppttiioonnss

All accessories and options may not be available in all markets.Contact an authorized Kenwood dealer for details and complete list of all accessories and options.

SSttaannddaarrdd MMIILL 881100CC MMIILL 881100DD MMIILL 881100EE MMIILL 881100FF MMeetthhooddss//PPrroocceedduurreess MMeetthhooddss//PPrroocceedduurreess MMeetthhooddss//PPrroocceedduurreess MMeetthhooddss//PPrroocceedduurreess

LLooww PPrreessssuurree 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I,II 500.4/Procedure I, IIHHiigghh TTeemmppeerraattuurree 501.1/Procedure I, II 501.2/Procedure I, II 501.3 I,II 501.4/Procedure I, IILLooww TTeemmppeerraattuurree 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, IITTeemmppeerraattuurree SShhoocckk 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, IISSoollaarr RRaaddiiaattiioonn 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I, IIRRaaiinn 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, IIIHHuummiiddiittyy 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4SSaalltt FFoogg 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4DDuusstt 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, IIIVViibbrraattiioonn 514.2/Procedure VIII, X 514.3/Procedure I Cat. 8 514.4/Procedure I Cat. 8 514.5/Procedure I Cat. 20SShhoocckk 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV

IInntteerrnnaattiioonnaall PPrrootteeccttiioonn SSttaannddaarrddDDuusstt && WWaatteerr PPrrootteeccttiioonn** IP54/55

*To meet IP54/55, the 2-pin connector cover has to be connected on the radio; the locking bracket has to be attached to the KMC-45 external speaker microphone.

AApppplliiccaabbllee MMIILL--SSTTDD && IIPP

*-10°C ~ +60°C when KNB-29N in use.

www.kenwood-electronics.co.uk

TK2306.qxd 17/9/08 12:22 Page 2

US MIL-STD

810C/D/E/F/G

COMPLIANT

TH

EINTERNATIONAL

IP54/55

STANDARD

COMPLIANT

TK-2317/3317 VHF/UHF FM Portable Radios

The new TK-2317/3317 is thin and compact yet

packed with features for intuitive operation,

impressive performance, and all-weather

reliability. Nine programmable function keys allow

for customized convenience, and Kenwood’s

renowned audio clarity means the message gets

through loud and clear.

UHF WIDE BAND COVERAGEOffering extensive frequency coverage – 70MHz for UHF – the TK-2317/3317 is ideal for a wide range of applications.

128 CHANNELS / 128 ZONESThe 128-channel, 128-zone capacity is ample for any current or future requirement in any radio system.

5W OUTPUT POWEROutput is 5W for both VHF and UHF.

GPS CONNECTIVITY Combined with the optional KMC-48GPS Speaker Mic, the TK-2317/3317 can function as a mobile station for Kenwood’s AVL system.

9 PF KEYS9 programmable functions keys (7 in the front and 2 on the side) allow operation to be customized to fit specific requirements.

EASY OPERATIONSeven frontal PF keys provide easy one-touch operation. And the 8-character, 13-segment backlit LCD with icons – including a new RSSI display – makes channel information or FleetSync® messaging easy to read, day or night.

4-COLOR LED INDICATORIn addition to the red/orange/green LED indicators, a blue LED has been added for quick visual confirmation.

PROGRAMMABLE VOICE INVERSION SCRAMBLER*

The built-in programmable voice inversion scrambler provides protection against casual eavesdropping.*This function cannot be used in certain countries. Please contact your Kenwood dealer or further 　information.

SIGNALING QT / DQT / DTMF FleetSync® PTT ID, SelCall 2-tone (encode/decode) Built-in MDC-1200 signalingFleetSync® and MDC-1200 signaling can be independently selected for each zone. Switching between them is as simple as changing zones.

EMERGENCY FUNCTIONFor hazardous/hostile environments, side PF keys can be programmed for Emergency use to transmit an alert to a predetermined person or group using DTMF, FleetSync® or MDC-1200 signaling.

ROBUST & WATER-RESISTANTThe tough TK-2317/3317 has passed the demanding IP54/55 tests, even with the optional speaker microphone KMC-45 attached (locking bracket required). It also meets or exceeds 11 MIL-STD 810 C/D/E/F/G environmental standards, including “blowing rain”.

CLEAR & CRISP, ENHANCED AUDIO

As an experienced audio specialist, Kenwood has decades of expertise that is reflected in every Kenwood radio – from component selection and construction to optimization, evaluation and analysis. The resulting audio performance, specially engineered for transceivers, is undeniably clearer and crisper. Just listen to the difference.

OTHER FEATURES• Radio stun • Priority scan • Channel / Zone delete & add • Key lock • Compander / VOX /Scrambler setting per channel • VOX • T.O.T • Busy channel lockout • Operator-selectable tone • Password protection• Wireless clone • Self-programming mode • TaIk around • Compatible with TK-2212/3212 batteries

tk2317_3317_m-uk.indd 1tk2317_3317_m-uk.indd 1 10/08/23 14:0110/08/23 14:01

Options


CL679M-E-2


JQA-QMA1205

KNB-45L Li-Ion Battery Pack (2,000 mAh)

KNB-53N Ni-MH Battery Pack (1,400 mAh)

KNB-29N Ni-MH Battery Pack (1,500mAh)

KSC-31 Charger for KNB-53N/29N

KSC-35 Rapid Charger for KNB-45L

KSC-316/356 6 Pocket Multiple Charge

KRA-22/23 VHF/UHF Low Profile Helical Antenna

KRA-26/27 VHF Helical Antenna/ UHF Whip Antenna

KMC-48GPS GPS Speaker Microphone


KMC-21 Compact Speaker Microphone

KHS-1 Headset with VOX/PTT

KHS-7/7A Single-Muff Headset

KHS-8BL/BE 2-Wire Palm Microphone (Black/Beige)

KHS-9BL/BE 3-Wire Lapel Microphone with Earphone (Black/Beige)

KHS-10-BH/-OH Noise-Reduction Headset with Noise-Cancelling Microphone

KHS-21 Headset

KHS-23 2-Wire Palm Microphonev

KHS-25 Headset with D-Ring Ear Hanger & Boom Mic./PTT

KHS-26 Clip Microphone with Earphone

KHS-27 Headset with Ear Hanger

KEP-2 Earphone Kit (2.5 mm plug)

KWR-1 Water Resistant Bag

KBH-10 Belt Clip

TK-2317 TK-3317 GENERAL Frequency Range Type 1 136 - 174 MHz 450 - 520 MHz Type 2 — 400 - 470 MHz Number of Channels / Zones 128 / 128 Channel Spacing Wide / Narrow 25 / 12.5 kHz Operating Voltage 7.5 V DC ±20 % Battery Life (5-5-90 duty cycle, save off / on) with KNB-45L (2000 mAh) Approx. 12 hours / Approx. 18 hours with KNB-53N (1400 mAh) Approx. 9 hours / Approx. 12 hours with KNB-29N (1500 mAh) Approx. 10 hours / Approx. 14 hours Operating Temperature Range -30°C ~ +60°C Frequency Stability ±2.5 ppm (-30°C ~ +60°C) Antenna Impedance 50 Ω Channel Frequency Spread 38 MHz 70 MHz Dimensions (W x H x D), Projections not Included Radio only 54 x 122 x 21 mm with Battery 54 x 122 x 33.7 mm Weight (net) Radio only Approx. 180 g with KNB-45L Approx. 300 g with KNB-53N Approx. 365 g with KNB-29N Approx. 380 g FCC ID Type 1 ALH413700 ALH413800 Type 2 — ALH413801 FCC Compliance Parts 22 / 74 / 90 Parts 22 / 74 / 90 Australia / New Zealand AS / NZS 4295

TK-2317 TK-3317 RECEIVER Sensitivity (12 dB SINAD) Wide / Narrow 0.25 µV / 0.28 µV Selectivity Wide / Narrow 70 dB / 60 dB Intermodulation Distortion Wide / Narrow 70 dB / 60 dB Spurious Response 70 dB Audio Distortion Less than 5 % Audio Output 500 mW / 8 Ω TRANSMITTER RF Output Power (High / Low) 5 W / 1 W

Spurious Response 70 dB FM Hum & Noise Wide / Narrow 45 dB / 40 dB Audio Distortion Less than 5 % Modulation Wide / Narrow 16K0F3E / 11K0F3E

Measurements made per TIA/EIA 603 and specifications shown are typical.Kenwood follows a policy of continuous advancement in development.For this reason specifications may be changed without notice.

FleetSync® is a registered trademark of Kenwood Corporation.

Specifications

Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810G Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure II Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5 Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV 516.6/Procedure I, IV

International Protection Standard

Dust & Water Protection IP54

IP55


www.kenwood-electronics.co.uk

tk2317_3317_m-uk.indd 2tk2317_3317_m-uk.indd 2 10/08/23 14:0110/08/23 14:01

TK-7102H/8102HCompact VHF/UHF/FM Mobile Radios

• Time Out Timer• Accessory Interface Cable Option• 8 Programmable I/O Ports3

• Ignition Sense4

• Horn Alert Output5

• 16-Key DTMF Mic Option• Windows Programming & Tuning6

• Cloning• MIL-STD-810 C/D/E/F

FleetSync®

• PTT ID Digital ANI• Emergency Status

GENERAL FEATURES• 50W (146-174 MHz) Models• 45W (450-490 MHz) Models• 8 Channels (4 Channels Per Group)• 2 Conventional Groups• Normal Scan• Backlit Keys• Channel / Transmit / Busy LED’s• 4 Channel Keys• 2 Function Keys• Up/Down Volume Keys• Enhanced Kenwood Audio• Front Panel Speaker• Emergency Call Features• QT/DQT• DTMF Encode / Decode1

• Special Alert Tone Patterns2

• Busy Channel Lockout

All accessories and options may not be available in all markets.Contact an authorized Kenwood dealer for details and completelist of all accessories and options.

Options SpecificationsModel TK-7102H TK-8102H

GENERALFrequency Range

Type 1 146-174 MHz 450-490 MHzNumber of Channels 8 (4 Channels x 2 Groups)Channel Spacing

Wide 25 kHzNarrow 12.5 kHz

Channel Step 2.5 kHz / 5 kHz 5 kHz / 6.25 kHz6.25 kHz / 7.5 kHz

Operating Voltage 13.6V DC±15%Current Drain

Standby 0.4 AReceive 1.0 ATransmit (High Power) 14.0 A

Operating Temperature Range -30°C ~ +60°CFrequency Stability ±2.5ppm (-30°C ~ +60°C)Antenna Impedance 50 ΩChannel Frequency Spread

Type 1 28 MHz 40 MHzDimensions (W x H x D)

6.29” x 1.69” x 5.39”(160 mm x 43 mm x 137 mm)

weight (net)(body only, approx.) 2.6 lbs (1.18 kg)

FCC IDType 1 ALH32933210 ALH32943210

RECEIVER (Measurements made per TIA/EIA-603)Sensitivity (12dB SINAD)

Wide 0.28 µVNarrow 0.35 µV

SelectivityWide 75 dBNarrow 60 dB

Intermodulation DistortionWide 70 dBNarrow 60 dB

Spurious Response 75 dBAudio Output (4W at 4 Ω ) with less than 5% distortion)TRANSMITTER (Measurements made per TIA/EIA-603)RF Output Power

50 W 45 WSpurious Response 70 dB(High Power)Modulation

Wide 16KØF3ENarrow 11KØF3E

FM Hum & NoiseWide 45 dBNarrow 40 dB

Audio Distortion Less than 3%Microphone Impedance 600 Ω

KMC-30Microphone(supplied microphone

KMC-3216-Key Keypad Microphone

KES-3External Speaker

KLF-2Line Noise Filter

KPS-15DC Power Supply


Applicable MIL-STDStandard MIL 810C MIL 810D MIL 810E MIL 810F

Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures

Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II

High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II

Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II

Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II

Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I

Humidity 507.1/Procedure II 507.2/Procedure II, III 507.3/Procedure II, III 507.4

Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4

Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III

Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I

Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V

ADS#28112 Printed in USA

JQA-QMA1205

footnotes from front:1 DTMF includes PTT ID, Emergency ANI, Manual Encode(KMC-32), Auto-Dial (9 numbers) & Stun.

2 Special Alert Tone Patterns operate for DTMF, selective call decode.3 KCT-39 required for 4 CH remote control, ignition sense (KCT-18), KGP-2A/B, KDS-100, data modems, external GPS interface.

4 KCT-39 & KCT-18 ignition sense cable options required.5 KCT-39 required: Horn Alert operates for DTMF selectivecall decode.

6 KPG-70D program software required: Windows® 2000Me/XP.

Specifications are subject to change without notice, due to advancements in technology.

FleetSync® is a registered trademark of JVC KENWOOD Corporation in the United States and/or other countries.Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.

All other trademarks are property of their respective owners.

TK-7180(H)/8180(H)VHF/UHF FM Mobile Radios

• DB-25 Accessory Connenctor5

• 9 Programmable AUX I/Os5

• 2 Programmable AUX Outputs5

• Ignition Sense6

• Public Address / Horn Alert Option7

• MIL-Spec Standard Mic• MIL-Spec 12-Key DTMF Mic Option• Windows® Programming & Tuning8

• Windows® Firmware Uploading8

• Front Panel Test / Tune• Cloning• MIL-STD-810 C/D/E/F• MIL-STD “Driven-Rain”9

• IP-54/55 Water & Dust Intrusion9

CONVENTIONAL ZONES • 512 Channels / 128 Zones10

• QT / DQT• Two-Tone Decode11

• Single / Two-Tone Encode11

• Operator Selectable Tone11

• Dual Priority Scan• Single & Multi-Zone Scan• List Scan

TRUNKED ZONES• 512 GID / 128 Zones10

• Kenwood LTR® Features12

FleetSync®

• FleetSync® or FleetSync® II13

• PTT ID Digital ANI• Selective Call & Group Call• Status Messaging• Emergency Status• Caller ID Display• Short & Long Text Messages14

• Power On/Off Status Messages• Input / Output Status Messages• FleetSync® GPS Ready15

• Send GPS PF Key15

• PTT ID & Emergency GPS Reporting15

• Status Message Block GPS Reporting15

• Ignition On/Off GPS Reporting6, 15

• VGS-1 GPS Data Storage15,16

• PC Serial Interface

MDC-120017

• PTT ID Digital ANI• Caller ID Display• Emergency Status• Radio Check• Radio Inhibit

GENERAL FEATURES• 30/50 W (136-174 MHz)• 30/45 W (450-520, 400-470 MHz)• Conventional & LTR® Zones• MPT1327 Trunking Option• Remote Control Head Option1

• 12 Character Alphanumeric Aliases• Backlit Dot Matrix LCD• 3-Digit Sub-Display• Function / Status LCD Icons• RSSI Indicator • Date & 12/24 Hour Time Clock• Transmit / Busy / Call Alert / Warn LED• 6 Backlit PF Keys• Emergency / AUX Key • Enhanced Kenwood Audio• Front Panel Speaker• Companded Audio• Voice Inversion Scrambler Built-in• Easy Option Port• Encryption / ANI Board Control• VGS-1 Voice Guide / Storage Option• Emergency Call Features• DTMF Encode / Decode2

• Special Alert Tone Patterns3

• Call Key4

• Time Out Timer• Busy Channel Lockout• Timed Power Off


KMC-35Microphone (supplied microphone)

KMC-36Keypad Microphone

KMC-9C Control Station Desktop Microphone

KRK-10Control Head Remote Kit (23ft/7m)

KCT-46Ignition Sense Cable

KCT-40Radio Interface Cable (for KDS-100, KGP-2A/2B)

KCT-23M DC Cable (Dash mount / 10 feet)

KCT-23M3DC Cable (Remote mount / 23 feet)

KAP-2Horn Alert/Public Address Relay Unit

VGS-1Voice Guide & Storage Unit


KES-5External Speaker (requires KAP-2)



KPS-10A DC Power Supply

KPS-15DC Power Supply

KDS-100Mobile Data Terminal

KGP-2A/2BGPS Receiver / Modem Unit(requires KCT-39 option)


Model TK-7180 TK-7180H TK-8180 TK-8180H

GENERALFrequency Range

Type 1 136~174 MHz 450~520 MHz 450~512 MHzType 2 – 400~470 MHz

Number of Channels*Zone Max.128 per RadioCh/GID Max.250 per Zones

(Max.512 [Conv.Ch’s +GID’s] total per Radio)Channel Spacing

Wide 25 kHz, 30 kHz 25 kHzNarrow 12.5 kHz, 15 kHz 12.5 kHz

Operating Voltage 13.6 V DC±15 %Current Drain

Standby 0.4 A 0.4 A 0.4 A 0.4 AReceive 1.0 A 1.0 A 1.0 A 1.0 ATransmit 9.0 A 13.0 A 9.0 A 13.0 A

Duty Cycle Transmit: 20 %Operating Temperature Range -22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC)Frequency Stability ±0.00025 % (-22 ºF ~ +140 ºF)Antenna Impedance 50 ΩChannel Frequency Spread

Type 1 38 MHz 70 MHzType 2 – 70 MHz

Dimensions (W x H x D), 6-5/16” x 1-3/4” x 6-3/16”Projections not included (160 mm x 45 mm x 157 mm)Weight (net) 3.3 lbs. (1.5 kg)FCC ID

Type 1 K4437303110 K4437303210 K4437313110 K4437313210Type 2 – – K4437313120 K4437313220

IC CertificationType 1 282F-37303110 – – –Type 2 – – 282F-37313120 –

Model TK-7180 TK-7180H TK-8180 TK-8180H

RECEIVER (Measurements made per EIA/TIA-603)Sensitivity (12dB SINAD)


Selectivity**Wide 80 dB 80 dBNarrow 70 dB 67 dB

Intermodulation DistortionWide/Narrow 75 dB (±50, 100 kHz)

Spurious Response** 90 dB 85 dBAudio Output(4 Ω Impedance) 4 W with less than 5 % distortion

TRANSMITTER (Measurements made per EIA/TIA-603)RF Output Power

Type 1 30 to 1 W 50 to 10 W 30 to 1 W 45 to 10 W(490 -520 MHz:25 to 1 W) (490 -512 MHz:40 to 10 W)

Type 2 – – 30 to 1 W 45 to 10 WSpurious Response 70 dBType of Emission

Wide 16K0F3ENarrow 11K0F3E

FM Hum & Noise Wide 50 dBNarrow 45 dB

Microphone Impedance 600 ΩAudio Distortion

Wide/Narrow 3 %

Standard MIL 810C MIL 810D MIL 810E MIL 810F Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures

Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, IIHigh Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, IILow Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, IITemperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, IISolar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure IRain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, IIIHumidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, IIIVibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure IShock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V

International Protection Standard

Dust & Water Protection P54: Radio itselfP54/55: Remote Head with KRK-10

*To meet above Mil810 and IP grade, weather proof microphone KMC-35 or KMC-36 has to be connected.

*Maximum capability depends on the number of programmed Zone and repeater channels.

** Typical specificationsSpecifications are subject to change withoutnotice, due to advancements in technology.

Options

Specifications


footnotes from Front:1 KRK-10 remote control kit required.2 DTMF includes PTT ID, Emergency ANI, Manual Encode (KMC-36), Auto-Dial (9 numbers) & Stun.

3 Special Alert Tone Patterns operate for 2-Tone, DTMF, FleetSync® selective call decode.

4 Call Key: 6 keys max.; operates for 2-Tone, DTMF and FleetSync status encode.

5 DB-25 ACC supports 15 Remote Zone/CH/GID selections, KGP-2A/B (KCT-40 required), KDS-100 (KCT-40 required), data modem, MDT, interconnect.

6 KCT-46 ignition sense cable option required; plugs into mobile ignition sense pig-tail cable.

7 KAP-2 required: Horn Alert operates for FleetSync®, 2-Tone or DTMF selective call decode.

8 KPG-89D required: Windows®98/ NT/ 2000/ Me/XP compatible;English/Spanish screen languages.

9 MIL-STD “Driven-Rain” and IP-55 Water/Dust Intrusion apply to remote control head only; IP54 applies to radio chassis.

10 Conventional Zones: 512 Channels /128 Zones max. per radio; 250 CH max. per Zone Trunked Zones: 512 GID / 128 Zones max. per radio; 250 GID max. per Zone.

11 Two-Tone Decode (4 sets x 4 pairs each); Single / Two-Tone Encode (32 tones), Operator Selectable Tone (40 QT.DQT code pairs).

12 Kenwood LTR® Features include: GID Delete/Add, LTR® Talk Around /Scan Revert Group Display, System Scan, Group Scan, Auto Search.

13 FleetSync® & FleetSync® II are not compatible. 14 Short Text Messages are radio stored & LCD displayed; Long Text Messages require a KDS-100 and KCT-40.

15 FleetSync® GPS features require an internal GPS board or externally wired GPS receiver with NMEA TTL level serial data output to the internal COM 1 or 2 set to "GPS".

16 Requires a VGS-1 option.17 Either MDC-1200 or FleetSync® can be activated per radio.

FleetSync® is a registered trademark of JVCKENWOOD Corporation in the United Statesand/or other countries.LTR® is a registered trademark of TranscryptInternational.All other trademarks are property of their respective owners.

GPS-2A

GPS-2B

TK-7185VHF MPT1327 Trunked Mobile Radio

• MIL-STD-810C/D/E/F• MIL-STD "Driven-Rain"5

• IP-54/55 Water & Dust Intrusion5

CONVENTIONAL MODE6

• 32 Channels• 12.5/25 kHz CH Spacing (per CH)• QT / DQT Encode & Decode• Normal Scan (No Priority)• Scan Delete / Add• Companded Audio (per CH)• Time Out Timer• Busy Channel Lockout (per CH)

TRUNKED MODE6

• 8 Network Capacity• Multi-Site Network Trunking• Single-Site Trunking• Network Roaming/Registration• 12.5/25 kHz Spacing (per network)• Individual Call ("Private Calling")• Group Call• Broadcast Call• Inter-fleet Calling• Inter-Prefix Calling• PTT Initiate Call

• PSTN / PABX Call• Priority Call• Emergency Call• Pre-emptive Emergency• Full Off Air Call Setup• Network Call Queuing• Call Prioritisation• Third-Party Diversion• Queue Incoming Call• Special Alert Tones7

• Electronic Serial Number (ESN)• Manual Conventional Mode• 99 Call and Group Address List• Home Address• Companded Audio8

• Network Selector• KAP-2 PA / Horn Alert Option9

• PAA2424 available

GENERAL FEATURES• 1-25 W (217-270 MHz)• Remote Control Head Option• Backlit Dot Matrix LCD• 12 Character Alphanumeric Aliases• 3-Digit Sub-Display• Function / Status LCD Icons• Display Customisation• RSSI Indicator• Date & 12/24 Hour Time Clock• Transmit / Busy / Call Alert• 6 Backlit PF Keys• Emergency / AUX Key• 4 Watt Front Panel Speaker• Voice Inversion Scrambler Built-in• Enhanced Kenwood Audio• Encryption Board Control• Easy Option Port1

• DTMF Manual Encode2

• Timed Power Off• DB-25 Accessory Connenctor• 9 Programmable AUX I/Os• 2 Programmable AUX Outputs• Ignition Sense3

• Mil-Spec Standard Mic• MIL-Spec 12-Key DTMF Mic Option• Windows® Programming & Tuning4

• Windows® Firmware Uploading4

• Front Panel Test / Tune

footnotes :

1 Easy Option Port: Supports Encryption boards only; ANI boards are not supported.

2 DTMF Manual Encode (DTMF microphone required)

3 KCT-46 ignition sense cable option required; plugs into mobile ignition sensepig-tail cable.

4 KPG-96D required: Windows® 98/ME/2000/XP/Vista (32-bit) compatible.

5 MIL-STD "Driven-Rain" and IP-55 Water/Dust Intrusion apply to remote controlhead only; IP54 applies to radio chassis.

6 Conventional Mode: Mode entry by PF key or auto Mode Change.Network / Trunking operations are MPT1327/1343 compatible.

7 Special Alert Tone Patterns: enabled for MPT Individual Call, Auto Mode Change.

8 Companded Audio can be enabled for all Channels in Trunked Mode and perChannel in Conventional Mode.

9 KAP-2 required: Public Address & Horn Alert operate in MPT mode only.

Specifications

CL633E-E-2(SA)

Options

KMC-30Microphone

KMC-32Keypad Microphone

KMC-35Microphone(heavy-duty)

KMC-36Keypad Microphone(heavy-duty)

KMC-9CControl StationDesktop Microphone

KRK-10Control HeadRemote Kit (23ft/7m)

KCT-46Ignition Sense Cable

KCT-23M3DC Cable (Remotemount / 23ft/7m)

KAP-2Horn Alert/PublicAddress Relay Unit


KES-5External Speaker(requires KAP-2)



KPS-10ADC Power Supply

TK-7185GENERALFrequency Range 217~270 MHzNumber of Channels/Call Address

Conv. Mode Max.32 per personalTrunked Network Max.99 per personal

Channel Spacing 25 kHz/12.5 kHzOperating Voltage 13.2 V DC (10.8 ~ 15.6V DC)Current Drain

Standby 0.4 AReceive 1.0 ATransmit 9.0 A

Operating Temperature Range -30 ºC ~ +60 ºCFrequency Stability ±2.5 ppm (-30 ºC ~ +60 ºC)Antenna Impedance 50 ΩChannel Frequency Spread 53 MHzDimensions (W x H x D), Projections not included 160 mm x 45 mm x 157 mmWeight (net) 1.5 kgApplicable Standards EN300 086, EN300 113, EN300 219, EN301 489

EN60065, EN60950-1, EN60215EU directive 95 / 54 / EC

TK-7185RECEIVERSensitivity (EIA 12dB SINAD) 0.25 µV/0.28 µVSensitivity (EN 20dB SINAD) -3 dB µV/-2 dB µV

25 kHz/12.5 kHzAdjacent Channel Selectivity

25 kHz/12.5 kHz 80 dB/70 dBIntermodulation 70 dBSpurious Response Rejection 80 dBAudio Output (4 Ω impedance) 4 W with less than 5 % distortion (Typical)Measurement EN standardTRANSMITTERRF Output Power Max. 25 WModulation Limiting ±5.0 kHz at 25 kHz

±2.5 kHz at 12.5 kHzSpurious Emission -36 dBm ≤ 1 GHz, -30 dBm > 1 GHzFM Noise (EIA) 50 dB/45 dBModulation Distortion Less than 3%Microphone Impedance 600 ΩMeasurement EN standard

Kenwood reserves the right to change specifications and features without prior noticeWindows® is a registered trademark of Microsoft Corporation in the United States and other countries.


Methods/Procedures Methods/Procedures Methods/Procedures Methods/ProceduresLow Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, IIHigh Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, IILow Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, IITemperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, IISolar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure IRain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, IIIHumidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, IIIVibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure IShock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, VInternational Protection Standard

Dust & Water Protection IP54: Radio itselfIP54/55: Remote Head with KRK-10

All accessories and options may not be available in all markets.Contact an authorized Kenwood dealer for details and complete list of all accessories and options.

JQA-QMA1205

Kenwood has always connected with people through sound. Now we want to expand the world of sound in ways that only Kenwood can,listening to our customers and to the pulse of the coming age as we head toward a future of shared discovery, inspiration and e njoyment.

global communicationsReg. No. 1987/003508/07Highway Business Park, Park Street, Rooihuiskraal, CenturionP.O. Box 27, The Reeds 0061, PRETORIA, RSATel: +27 12 621 0400 Fax: +27 12 661 0388e-mail: [email protected] page: www.globalcomms.co.za

YOUR LOCAL DEALERKENWOOD CORPORATION2967-3, Ishikawa-Cho, Hachioji-Shi, Tokyo 192-8525, Japan


TK-7360HV/8360HUCompact VHF/UHF FM Mobile Radios

• 8 Programmable I/O Ports• Ignition Sense• Public Address / Horn Alert Output• MIL-Spec Standard Mic• MIL-Spec 12-Key DTMF Mic Option• Windows® Programming & Tuning• Easy Option Ports (26-pin)• Cloning• Voice Guide & Storage (Option)• MIL-STD-810 C/D/E/F/G• IP54 Water & Dust Intrusion

CONVENTIONAL ZONES• 128 Channels / 128 Zones• QT / DQT• Two-Tone Decode• Single & Two-Tone Encode• Operator Selectable Tone• Single Priority Scan• Single / Multi-Zone Scan

TRUNKED ZONES• 128 GID / 128 Zones• Kenwood LTR® Feature

FleetSync®/II (FM)• PTT ID Digital ANI• Selective Call & Group Call• Paging Call• Status Messaging• Emergency Status• Caller ID Display• Input / Output Status Messages• FleetSync® GPS Ready• Send GPS PF Key• PTT ID & Emergency GPS Reporting• GPS Auto Reporting

MDC-1200• PTT ID Digital ANI• Caller ID Display• Emergency Status• Radio Check• Radio Inhibit

GENERAL FEATURES• 50 W (136-174 MHz) Model• 45 W (450-520 MHz) Model• Conventional & LTR® Zones• 10-Character Alphanumeric Aliases• Backlit LCD & Keys• Function/Status LCD Icons• Blue Function / Status LED• Transmit /Busy / Call Alert LED• 10 Programmable Function Keys• Emergency / AUX Key• Front Panel Speaker• Companded Audio• Voice Inversion Scrambler Built-in• 16 Scrambler Codes (per CH)• Encryption / Board Control• Emergency Call Features• Lone Worker Alert • DTMF Encode / Decode• Special Alert Tone Patterns• Busy Channel Lockout• Time Out Timer • Timed Power Off• DB15 Accessory Interface

V2.0

Options

All accessories and options may not be available in all markets. Contact an authorizedKenwood dealer for details and complete list of all accessories and options.Specifications

Model TK-7360HV TK-8360HU

GENERALFrequency Range 136~174 MHz 450~520 MHzNumber of Channels

Zone Max.128 per RadioCh/GID Max.128 per Zone

Channel SpacingWide 25 kHz 25 kHzNarrow 12.5 kHz 12.5 kHz

Operating Voltage 13.6 V DC±15 %Current Drain

Standby 0.4 A 0.4 AReceive 1.0 A 1.0 ATransmit 14.0 A 14.0 A

Operating Temperature Range -22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC)Frequency Stability ±2.5 ppm (-22 ºF ~ +140 ºF)Antenna Impedance 50 ΩChannel Frequency Spread 38 MHz 70 MHzDimensions (W x H x D), 6.3” x 1.7” x 5.4” Projections not included (160 mm x 43 mm x 137 mm)Weight (net) 2.6 lbs. (1.18 kg)FCC ID K44415401 K44415502

Model TK-7360HV TK-8360HU

RECEIVER (Measurements made per EIA/TIA-603)Sensitivity (12dB SINAD)


SelectivityWide 75 dBNarrow 65 dB

Intermodulation DistortionWide 70 dBNarrow 65 dB

Spurious Response 75 dBAudio Output(4 Ω Impedance) 4 W with less than 5 % distortion

TRANSMITTER (Measurements made per EIA/TIA-603)RF Output Power 5 W / 25 W / 50 W 5 W / 25 W / 45 W*1

Spurious Response 70 dBType of Emission

Wide 16K0F3ENarrow 11K0F3E

FM Hum & Noise Wide 45 dBNarrow 40 dB

Microphone Impedance 600 ΩAudio Distortion

Wide 3 %Narrow 5 %

*1: 490 ~ 512 MHz: 5/25/40 W, 512 ~ 520 MHz: 5/25/35 W

Specifications are subject to change without notice, due to advancements in technology.

FleetSync® is a registered trademark of JVC KENWOOD Corporation.LTR® is a registered trademark of Transcrypt International.Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. All other trademarks are property of their respective owners.

KMC-35Microphone (Supplied)

KMC-36Microphonewith Keypad

KMC-9CDesktop Microphone

KES-3 External Speaker

KES-5External Speaker(requires KCT-60 option)


KLF-2Line Filter

KCT-18Ignition Sense Cable (requires KCT-60 option)

KCT-36 3m Extension Cable (for KCT-60)

KCT-60DB 15-to-15 PinMolex Adaptor Cable

VGS-1Voice Storage Unit(uses 26p connector)

Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810GMethods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures

Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, IIHigh Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, IILow Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure ISolar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I Rain*2 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, IIIHumidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure IISalt Fog*2 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5Dust *2 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure IVibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I

Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V 516.6/Procedure I, IV, V

International Protection StandardDust & Water Protection IP54: Radio itself

*1: Necessary conditions are: (1) KMC-35/36 microphone is connected; (2) cap is installed on speaker connector;(3) cover is installed on D-sub 15-pin connector; and (4) neither KCT cable nor SP cable is connected.



CONVENTIONAL REPEATER OPERATION The TKR-750/850 are “community repeater-ready” witha built-in internal 16 QT/DQT group controller andprogrammable repeater functions such as CWTransmitter ID, Hang-Timer, Time-Out-Timer and RepeatEnable/Disable Key. The 15W-to-50W (TKR-850:15W-to-40W) adjustable output power is ideal foron-site low power repeater applications.

CONVENTIONAL OR TRUNKING SYSTEM USEThe TKR-750/850 can serve as the core element of anyconventional or trunking repeater system. The internalconventional controller can be used, or an externalconventional or trunking logic controller can be easilyinterfaced for advanced systems.

SIMPLEX OR DUPLEX BASE STATIONOPERATIONThe TKR-750/850 can be operated in simplex orfull-duplex base station mode with up to 16 channelsand priority scan. Internal solid state antenna switchingis provided for simplex single-antenna base stationoperation. The accessory connectors provide remotecontrol interface. Also programmable are the six PFfunction keys, LED indicators, control/warning/alert/power-on tones and tone volume for facilitating anyremote site installation.

DTMF OVER-THE-AIR REMOTE CONTROLAll front panel PF Key functions and AUX Input functions can be remotely activated and deactivatedover-the-air via DTMF codes (up to 16 digits each) andprovide an acknowledgement single tone or customDTMF transpond code. Also AUX Inputs, upon activationand deactivation will encode unique DTMF codes formonitoring and alarm purposes.

LED DISPLAY & INDICATORSThe enhanced 7-segment/2-character front panel LEDprovides 2-character alphanumeric channel designatorand scan indicator for base station operation, a PLLunlock indicator and a PC program mode status. Frontpanel dual-color LED’s provide Transmit, Busy,Primary/Backup DC Power indications.

BACKUP POWER FEATURESThe Backup Battery Warning Tone transmits an over-the-air5-second tone after DC supply has switched from“main’’ to “backup’’ power. Optionally a reminderOperation Tone can be transmitted while on backuppower. These tones can be triggered when either DCpower is connected to the “backup’’ DC input line orwhen the supplied voltage is lower than the programmedPower Supply Level DC voltage setting.

REPEATER FEATURES• Full-Duplex Operation• Built-in 16 QT/DQT Tone/Code Pair Community

Repeater Operation• External Controller Interface • Conventional or Trunking Controller Compatible• Repeat Enable/Disable • 8 CW Transmitter IDs• Repeat Hold Timer (hang timer)• Time Out Timer

BASE STATION FEATURES• 16 Channel • Simplex or Full Duplex Operation• Antenna Switch For Simplex/Single Antenna Operation• Priority Scan • Remote Control Inputs• 7-Segment 2-Character Channel & Scan LED• 2 Character Alphanumeric Channel Designator• Power/Transmit/Busy LED Indicators• 6 Lighted PF Keys• Local Takeover/Remote PF Key• Channel Up/Down PF Keys• Volume Control Knob• Courtesy Tone• Front Microphone Jack• Front Panel Speaker • Voice Encryption Port

GENERAL• 19" Rack Mount Design• Primary DC Input Connector• Auto-Switched Back-up DC Input Connector• Backup Battery Warning/Operation Tones• Rear External Speaker Output (4 Watts Audio)• Rear Test-Speaker-AUX Connector (15-Pin)• Built-in Cooling Fan (temperature or continuous)• Programmable AUX Input/Output Functions• BCD Remote Channel Selection (4 lines)• Toggle or Momentary Operation on AUX Input Ports• Pre-Emphasis On/Off Control (at TA AUX Input)• DSP Processed QT/DQT• DSP Processed Companded Audio• QT/DQT Squelch-Tail Elimination• Beep Tones for Control, Warning, Alert & Power On• Electronic Serial Number (ESN)• Embedded Message with Password Protection• High Stability Oscillators (TCXO)• Windows® 98/2000/Me/XP PC programming & tuning• Flash Memory

TKR-750/850VHF/UHF FM Repeater-Base Units

A versatile unit, the TKR-750/850 is a16-user group conventional repeater, asimplex or full duplex base station or theRF core of a trunking system. Advancedfeatures include DSP audio processing,DTMF over-the-air remote control andprogrammable Auxiliary I/O’s.

* Not all accessories may be available, please contact dealers for details.


KMC-27AMicrophone (with Noise Canceling)

KMC-27BMicrophone

KMC-9CDesktop Microphone


Specifications

Options

JQA-QMA1205

Kenwood USA Corporation is committed to a policy of constant improvement in features,quality and performance. To accommodate these improvements, all technical informationand specifications are subject to change without notice. Custom options and configura-tions are available, if needed. For more information, call 1-800-TRUNKING.

Technology

Kenwood Catalogue