iS5 Communications Catalog

Your Fortified Intelligent Network Solutions Partner

www.iS5com.com

About iS5ComiS5Com is an integrated service and solutions provider and manufacturer of intelligent, Industrial Ethernet products designed to be used in the harsh environments of utility substations, roadside transportation, rail, and industrial applications. iS5Comʼs services and products are key enablers of advanced technology implementation such as the Smart Grid, Intelligent Transportation Systems and the Intelligent Oil Field.

The iS5Com teamʼs expertise includes a deep background in:

State-of-the-Art electronics and technologies World Class manufacturing and logistics Designing and implementing Telecom and IP networks in the Electric Power industry

iS5Com applies these skill sets to create value for clients that include:

Cost effective products that exceed current requirements. Services and intelligent solutions that are part of a secure, interoperable and highly available infrastructure. Create unique features and products based on input from customers to meet their evolving needs.

Our ProductsiS5Comʼs industrial Ethernet products are designed using industrial grade components. This enables the products to withstand harsh industrial environments, such as extreme temperatures of -40°C to +85°C, vibration, shock, high levels of EMI, etc. The products have fault tolerant features like dual redundant power supplies in wide range of voltages of 24VDC, 48VDC, and a universal high voltage AC/DC supply. Our products also provide support for most fiber optic connectors such as SC/ST/LC/SFP with port speeds of 10/100/1000/10000 Mbps. The iS5Com line of IEC 61850 products are designed to transmit data efficiently without the loss of any packets under extreme environments and EMI conditions.

Our support and service teams are comprised of experienced network implementation experts who can design, consult, implement, and commission any project.

Our standard 5 year warranty (extendable) provides our customers with the assurance and peace of that their investment is secure.

Our VisionTo be first to market, provide end-to-end solutions, and to be constant innovators in the products and services we provide.

Our Mission Increasing responsiveness in everything we do, Reliability in everything we do, Quality implied in everything we do.

www.iS5com.com

We believe it should be easier for our clients to adopt new technologies.Our expertise is Creating, Moving and Using Data.Our backgrounds are Private Networks, Harsh Environments gained from applications around the world.

AT OUR CORE IS A PASSION FOR SIMPLY PRACTICAL SOLUTIONS

Client Centric

Client

World Class

Manufacturing

Global

Tailo

red

Eng

inee

ring

LogisticsTe

chno

logi

es

Industry Depth

ApplicationExpertise

EmployeeOwned

Ease-of-UseTargeted FeaturesExceptional Value

Highly Con�gurableReliableQuality

SecureIntelligentAvailable

RapidTurn-Around

End-to-EndServices

NimbleSolutions

TenaciousResponsiveness

LocalPresence

GlobalAdvantage

iSYSTEMS ............................................. 5

Product Line Matrix

iMANAGE Software Suite ...................... 6

Media Converters ............................ 7-22

iMC2 - Industrial Ethernet to Fiber Converter with 1x10/100Base T(X) to 1x10/100Base-F(X) or 1x10/100Base-F(X) SFP

iMC2F - Industrial IEC 61850-3 Ethernet to Fiber Media Converter

iMC2G - Industrial Gigabit Ethernet Media Converter

iMC2S - Intelligent 2 Port Ethernet to Fiber Converter

iMC3 - Industrial Ethernet to Fiber Converter with 2x10/100 Base T(X) and 1x100Base-FX

iMC4 - Industrial 2 Port 10/100 Base (TX) to 2 Port 100 Base (X) Ethernet Converter

iMC4G - Industrial 2 Port 100/1000 Base (TX) to 2 Port 100/1000 Base (X) Ethernet Converter

iPS2 - Industrial 1 Port Gigabit PoE Splitter

Serial Servers .................................23-29

iDS6 - Intelligent 4-port RS232/422/485 Device Server to 2 redundant LAN ports

iDS6P - Intelligent Device Server with 4 Isolated 422/485 Serial Ports to 2xRJ4510/100 T(X) Ports, PoE

iDS6W - Intelligent 4 Port Secure Serial to IEEE 802.11 b/g Wireless Device Server

Managed/Unmanaged Switches

IEC 61850 Switches ........................30-44

iES20GF - Intelligent IEC 61850 20 Port Managed Ethernet Switch

iES26G - Intelligent IEC 61850 26 Port Managed Ethernet Switch

iES28TG - Intelligent IEC 61850 28 Port Managed Ethernet Switch

iES10GF - Intelligent 10 Port Managed Gigabit Ethernet Switch IEC61850, IEEE1613 Compliant

iES22GF - Intelligent 20 Port Managed Gigabit Ethernet Switch IEC61850, IEEE1613 Compliant

iES28GF - Intelligent 28 Port Configurable Gigabit Switch IEC 61850, IEEE 1613 and EN50155

HSR/PRP Switches .........................45-48

iRBX - Intelligent 6 Port Redundancy Ethernet Box

iRBX6GF - Intelligent 6 Port HSR/PRP Ethernet Switch IEC 61850 and IEEE 1613 Compliant

PoE Switches ..................................49-54

iES12GP - Intelligent 12 Port Managed Gigabit PoE Ethernet Switch

iES28GP - Intelligent 28 Port Managed Gigabit PoE Ethernet Switch

Ethernet Switches ..........................55-65

iES6 - Intelligent 6 Port Ethernet Switch

iES8 - Intelligent 8 Port Managed Ethernet Switch

iES10G - Intelligent 10 Port Managed Ethernet Switch

iES24G - Intelligent 24 Port Managed Gigabit Ethernet Switch

Gigabit Switches ............................66-73



iES18G - Industrial 18 Port Managed Ethernet Switch

Speciality Products ........................74-80

iROC - Intelligent Robust On-site Commander

iSG4F - Intelligent 4 Port Secure Gateway IEC 61850-3 and IEEE 1613 compliant

iSG18GFP - Intelligent 18 Port Secure Gateway IEC 61850-3 and IEEE 1613 Compliant

iPJ4G - Industrial 2-Port PoE Plus High Power Injector

iSERVICES & iSUPPORT .................81-84

iCare - Support ServicesCo-Managed Services - Support ServicesConsulting Services - Professional ServicesResident Engineer - Professional Services

Accessory List .................................... 85

Notes .............................................86-87

Contents

Page—5Specifications may change without notice. Products may not be exactly as shown. Trademarks are the property of their respective owners.

iSYSTEMS Product Line

INNOVATION AND PRODUCT PERFORMANCE ARE OUR STRENGTHS

G9

G10

G11

G12

100/1000X

G8

G2

G4

G6

G13

G18

G17

G14

G19

G20

G15

G16

G7

G1

G3

G5

10/100/1000T

C O MTM

iES20GF

Reset

FaultiRingR.MPWR2PWR1PWR

Console

LINK/ACT

LINK/ACT

iES12G

G8

G2

G4

G6

G7

G1G1

G3G2

G3

G4

G5

G6

G7

G8

G9

G10

G11

G12

G5

1000X100/1000X

10/100/1000T

Reset


Console

C O MTM

iES10GP1 P2

P3

P5

P7

P4

P6

G1

Reset

G2G3

C O MTM


Console

10/100/1000T

10/100

iES8/8G iES10G(P,F)

iES12G

Fu

nc

tio

na

lity

Serial Servers

iDS6/6GP

iMC2/2F/2G/3

Media Converters

Managed / UnmangedSwitches

iES20GF

HSR/PRP

iRBXHSR/PRP Redundancy Box

PoE Switches

iES28TG10G Uplinks

iES26G

iES24G

iES28GPGigabit PoE

iES28TGC O M

TMM1 M2 M3 M4

2

1PWR

PWR

PWR DEF RMT iRING

R.M Alarm

Console 115200-N-8-1

LK/ACT

SPD

FDX

MODE

M1

M2

M3

M4

3 4

1 21 3 5 7

2 4 6 8

1 3 5 7

2 4 6 8

1 3 5 7

2 4 6 86 7 85

1 2 3 4

9 10 11 12

13 14 15 16

17 18 19 20

21 22 23 24

25 26 27 28

G5 G7 G17 G19 G21 G23

LINK/ACT 1000X

PoEG2

G1

G8

G7

G10

G9

G16

G15

G18

G17

G24

G23

G18 G20 G22 G24G2 G4 G6 G810/100/1000T

iES28GP

G10 G12 G14 G16

G9 G11 G13 G15

Reset

RUN RMT Fault

PW1 STA PWR iRing

PW2

PW3

DEF Ping R.M

G1 G3

Console

G25 G28G27G26

iRingFault Status

R.M P1

1 3 5 7

2 4 6 8

9 11 13 15

10 12 14 16

P2

LNK / ACT

Console

100M

17 19 21 23

18 20 22 24

C O MiES26G

TM

G1 G2

10/100/1000T

G17 G19 G21 G23G1 G3 G5 G7

G18 G20 G22 G24G2 G4 G6 G8Console

10/100/1000T100/1000X

Reset

RUN RMT Fault

PW1 STA PWR iRing

PW2 DEF Ping R.M

iES24GG9 G11 G13 G15

G10 G12 G14 G16

12

ON

Fault

ETH1

ETH2PoE

PWR2

PWR1

PoE

S2

S4

S2

S4

GNDR-

T/D+

R+ S1T/D-

GNDR-

T/D+

R+ S2T/D-

GNDR-

T/D+

R+ S3T/D-

GNDR-

T/D+

R+ S4T/D-

iDS6PC O M

TM

C O MTM

iES8G

Reset


P4

P2

P3

P5

P5 P6

P6

P7

P8

P1

Console

LINK / ACT

P7 P8LINK / ACT

iRBXC O M

TMM1 M2

2

1PWR

PWR

PWR DEF RMT iRING

R.M Alarm

Console 115200-N-8-1

LK/ACT

SPD

FDX

MODE

M1

M2

M3

M4

1 3 5 7

2 4 6 86 7 85

1 2 3 4

9 10 11 12

13 14 15 16

17 18 19 20

21 22 23 24

25 26 27 28

Specifications may change without notice. Products may not be exactly as shown.

Trademarks are the property of their respective owners.Page—6

iManage Software SuiteiMSSiManage Software Suite v3.5 - Powerful Network Management Windows Utility Suite

Features• Device configuration scan• IP setting group wizard, firmware upgrade group wizard, and

redundant ring (iRing) setting wizard• Status Monitoring and Alarm• Network analysis function• Draw the whole network topology automatically and path management

is available• Devices can be grouped and managed by different IP ranges• iMAP technology can show network device locations using Google MAP• The status of connections are automatically checked• IP scan for detection of all of the Ethernet switches in the local network• No limitation on the number of devices to be monitored

IntroductionA powerful management utility is important for administrators to monitor and manage all devices in a local network. Our Network Management Software suite includes four different features that meet the demands of a wide range of industrial applications. The four basic functions – Centralized management / Visualized management / Complete monitoring / Early system, iMSS v3.5 provides intelligent advantages. Through the advanced monitoring features and various warning systems; users are informed of any situation in the local network and recovers the network immediately.

Centralized Management iMSS v3.5 helps the administrator configure all the Ethernet switches at once within a few steps by powerful application wizards in iManager: IP Setting Wizard, Firmware Upgrade Wizard, and Redundant Ring (iRing) Group Wizard (in iManager). Administrators no longer need to configure the managed switches one by one.

Visualized ManagementOur Topology View shows all Ethernet switches on the local network. Different switches can be grouped by different IPs and shown in different topology windows. Administrators do not need to monitor all of the switches on the local network at the same time, making monitoring easier and more efficient. Status of the connections are shown in different colors. Our topology view helps administrators manage visually, intuitively, and more efficiently.

Complete MonitoriMSS v3.5 has various mechanisms to monitor the status of Ethernet switches, including event log, and SNMP traps. The administrators will be informed of any abnormal events by email. Event logs can be exported as an Excel file. Configurations of Ethernet switches on the local network can be saved, and the status of configurations of the switches can be scanned regularly to detect any changes to the configurations. The host monitor can automatically ping and check the status of connections among all IP-based devices on local area network. Host Monitor also features an IP categorized function, and all the IP-based devices can be grouped by the different IP’s to be monitored.

Early WarningAdministrators can be informed at a very early stage of any failures on the network, based on the various monitoring mechanisms available.

RequirementsSoftware RequirementsOperating System Windows 2000/2003/XP/Vista/Win7

Browser IE 6.0 Service Pack 1 or higher version

Hardware RequirementCPU Intel Core 2 Duo 2.4 GHz or above

RAM 1G or above

Hard Disk Space 1G or above

Topology View• The topology views show the topology of connections among all of the

switches in the local network.• IP categorized function• Configure the switches into different IP domains, and there is no

limitation of the nodes to be configured by the Topology View.• Visualized warning system of the status of the connections among the

switches• Traffic flow analysis of each node• Event log that can be exported as an Excel file.• The administrator can plan the future topology manually in “Edit”

operation mode.

iMSSv3.5

Ho

st Monitor iM

anag

er

Topology View

Step-1

Step-2Step-3

Step-n...

Step-1

Step-2Step-3

Step-n...One by One

Distributed ManagementDistributed Management

One StepOne Step

Centralized Batch ManagementCentralized Batch Management

iMAP: Displays topology of connections on Google Map• Automatic device discovery• Device status monitoring• Syslog events• Scan device configuration

iManage• Automatic device discovery• Device status monitoring• Syslog events• Scan device configuration• IP setting Group Wizard, Firmware

Upgrade Group Wizard, and Redundant Ring (iRing) Group Wizard

Host Monitor• IP scan to detect all of the

IP-based devices in the local network.

• To check the health statuses of connections of all IP-based devices

• All of IP-based devices can be grouped and managed by different IP ranges

Ordering InformationAvailable ModelsIMSS-500 Powerful Network Management Windows Utility Suite, 500 IP devices


Media ConvertersiMC2Industrial 2 Port Ethernet to Fiber Converter

Features• Supports 1 port 100Base-T(X) auto-negotiation and

auto-MDI/MDI-X• Supports Ethernet to fiber or Ethernet to SFP port• Supports LFP (Link Fault Pass-through) function• Supports full/half duplex operation• Supports store and forward transmission• DIP-Switch to set various function• Rigid - IP-40 Galvanized Steel -40 to +85 degrees C • DIN-Rail and wall mount

IntroductioniMC2 is an industrial grade media converter for conversion of 10/100Base-T(X) to 100Base-FX. iMC2 supports MDI/MDIX auto detection. The iMC2 is a reliable media converter that will operate in the harshest environments.iMC2 also supports the LFP (Link Fault Pass-through) feature. The DIP-Switch enables the LFP function, enabling the iMC2 to force a link to shutdown immediately when the other link fails, giving the application software a chance to react to the situation.

SpecificationsModel Number iMC2 Multimode iMC2 Singlemode iMC2 SFPPhysical Ports100Base-T(X) Port in RJ45 Auto MDI/MDIX 1 1 1

Fiber Ports Number 1 1 -

Fiber Ports Standard 100Base-FX 100Base-FX

Fiber Mode Multimode Singlemode

Fiber Diameter (µm) 62.5/125 µm 50/125 µm 9/125 µm

Fiber Optical Connector SC SC

Typical Distance (Km) 2 Km 30 Km

Wavelength (nm) 1300 nm 1310 nm

Max. Output Optical Power (dbm) -14 dbm -8 dbm

Min. Output Optical Power (dbm) -23.5 dbm -15 dbm

Max. Input Optical Power (Saturation) 0 dbm 0 dbm

Min. Input Optical Power (Sensitivity) -31 dbm -34 dbm

Link Budget (db) 7.5 db 19 db

100Base-FX SFP port - - 1

Technology

Ethernet StandardsIEEE 802.3i for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX,IEEE 802.3x for Flow control

Processing Store-and-Forward

DIP-Switch setting

DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disableDIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiateDIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiateDIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex

LED indicators

Power indicator Green : Power LED x 2 (ON : power input on-line / (OFF) power input off-line

100Base-T(X) RJ45 port indicator

Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link downAmber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10MbpsGreen for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

100Base-FX fiber port indicatorGreen for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link downGreen for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable

Power

Input powerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply 120-370VDC or 85-264VAC with a single 10-48VDC Backup.

Power consumption (Typ.) 2.2 Watts

Overload current protection Present

Reverse polarity protection Present on terminal block

Physical CharacteristicEnclosure IP-40 Galvanized Steel

Dimension (W x D x H) 26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)

Weight (g) 218 g

EnvironmentalStorage Temperature -40 to 85ºC (-40 to 185ºF)

Operating Temperature -40 to 85ºC (-40 to 185ºF)

Operating Humidity 5% to 95% Non-condensing

Fibe

r Por

t Spe

cific

atio

n

iS5com

.com

Connections of Media Converter with LFP function

http://www.is5com.com



Regulatory approvals

EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)

EMSEN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Shock IEC60068-2-27

Free Fall IEC60068-2-32

Vibration IEC60068-2-6

Safety EN60950-1

WarrantyWarranty 5 Years

DimensionsAll Dimensions are in Inches

Ordering InformationBase Power

Supply Mount Ethernet Port 1

Ethernet Port 2 Description

iMC2 LV D 1RJ45 1SSC10

iMC2 | | | | Core assembly and packaging

LV | | | Dual Input (10-48VDC)

MV | | | Dual Input (36-72VDC)

HV | | | Single Input 120-370VDC or 85-264VAC with Single 10-48VDC Backup

D | | DIN Rail Mounting

P | | Panel Mounting

N | | No Mounting Hardware

1RJ45 | 10/100Base TX RJ45

1MSC05 100FX Multimode SC, 850nm, 500m

1MST05 100FX Multimode ST, 850nm, 500m

1SSC10 100FX Singlemode SC, 1310nm,10km

1SST10 100FX Singlemode ST, 1310nm, 10km

1SSC25 100FX Singlemode SC, 1310nm, 25km

1SST25 100FX Singlemode SC, 1310nm, 25km

1SFP** 100X SFP (Blank no optical transceiver)

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONSExample order code: iMC2-LV-D-1RJ45-1SSC10-C1 Description: Media Converter, Power Supply: Dual Input (10-48VDC), DIN Rail Mount, 1x10/100Base T(X) RJ45 port, 1x100F(X) Singlemode SC, 10Km Port, Conformal Coating C1=Add for conformal coating, FW – Leave blank for latest firmware

iMC2 (cont.)Industrial 2 Port Ethernet to Fiber Converter

Specifications (cont.)


Media ConvertersiMC2FIndustrial IEC 61850-3 Ethernet to Fiber Media Converter

Features• Fully compliant with the requirement of IEC 61850-3 and IEEE 1613• EN50155-compliant Ethernet switch for rolling stock applications• Supports 1 port 10/100Base-T(X) auto-negotiation and

auto-MDI/MDI-X• Supports Ethernet to fiber or Ethernet to SFP port• Supports LFP (Link Fault Pass-through) function• Supports full/half duplex operation• Supports store and forward transmission• Relay output for power failed alarm• Provided DIP-Switch to setting function• High reliability and rigid IP-40 housing• DIN-Rail and wall mounting enabled

IntroductionThe iMC2F media converter is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface. It allows you to extend communication distance using optical fiber. The iMC2F has been designed for power substation applications and rolling stock applications and is fully compliant with the requirement of IEC 61850-3 and IEEE 1613. The media converter supports MDI/MDIX auto detection, so crossover wires are not required. The iMC2F has wide operating temperature range from -40 ~ 85ºC, accepts a wide input voltage range, and is suitable for harsh operating environments.The iMC2F also supports the LFP (Link Fault Pass-through) feature. Link Fault Pass Through is usually used to solve the problem encountered when operating traditional media converters. The problem is this. When one side of the link fails, the other side still continues to transmit packets, and waits for a response that will never arrive. With link fault pass through, system administrators are able to notice the link failure within a short period of time, minimizing the loss caused by this problem. Use the DIP-Switch to enable the LFP function, the iMC2F will then force the link to shutdown as soon as it notices that the other link has failed, giving the application software a chance to react to the situation. The iMC2F has been designed to satisfy the most demanding environments in substation and rolling stock applications.

SpecificationsModel Number iMC2F Multimode iMC2F Singlemode iMC2F SFPPhysical Ports10/100 Base-T(X) Port in RJ45Auto MDI/MDIX 1 1 1

Fiber Port Number 1 1 -

Fiber Port Standard 100Base-FX 100Base-FX -

Fiber Mode Multimode Singlemode -

Fiber Diameter (µm) 62.5/125 µm 50/125 µm 9/125 µm -

Fiber Optical Connector SC, ST SC, ST -

Typical Distance (Km) 2 Km 25 Km -

Wavelength (nm) 1300 nm 1310 nm -

Max. Output Optical Power (dbm) -14 dbm -8 dbm -

Min. Output Optical Power (dbm) -23.5 dbm -15 dbm -

Max. Input Optical Power (Saturation) 0 dbm 0 dbm -

Min. Input Optical Power (Sensitivity) -31 dbm -34 dbm -

Link Budget (db) 7.5 db 19 db -


Technology

Ethernet StandardsIEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-T(X) and 100Base-FX IEEE 802.3x for Flow control


DIP-Switch setting

DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disableDIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiateDIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex

LED indicators

Power indicator Green : Power LED x 2 (ON : power input on-line / (OFF) power input off-line

10/100Base-T(X) RJ45 port indicator

Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link downAmber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10MbpsGreen for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

100Base-FX fiber port indicatorGreen for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link downGreen for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable

Power

Input PowerLV input: 10 to 48VDC, MV input: 36-72VDC or, HV: Single input universal supply 120-370VDC or 85-264VAC with a single 10-48VDC Backup.

Power consumption (Typ.) 11 Watts



Physical CharacteristicEnclosure IP-40

Dimension (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)

Weight (g) 1.4Kg

EnvironmentalStorage Temperature -40 to 85℃ (-40 to 185℉)

Operating Temperature -40 to 85℃ (-40 to 185℉)


Fibe

r Por

t Spe

cific

atio

n

iS5com

.com




Regulatory approvalsPower Automation IEC 61850-3, IEEE 1613



Shock IEC60068-2-27



Safety EN60950-1






iMC2F LV D 1RJ45 1SSC10

iMC2F | | | | Core assembly and packaging







1RJ45 | 10/100Base-TX RJ45

1MSC05 100FX Multimode SC, 850nm, 500m

1MST05 100FX Multimode ST, 850nm, 500m

1SSC10 100FX Singlemode SC, 1310nm,10km



1SST25 100FX Singlemode SC, 1310nm, 25km

1SFP** 100X SFP (Blank no optical transceiver) (SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONSExample order code: iMC2F-LV-D-1RJ45-1SSC10-C1 Description: 61850 Media Converter, Power Supply: Dual Input (10-48VDC), DIN Rail Mount, 1x10/100Base T(X), 1x100Base-F(X) Singlemode SC, 10Km Port, Conformal Coating C1=Add for conformal coating, FW – Leave blank for latest firmware

iMC2F (cont.)Industrial IEC 61850-3 Ethernet to Fiber Media Converter



Media ConvertersiMC2GIndustrial Gigabit Ethernet Media Converter

Features• Converts 10/100/1000Base-TX to 1000Base-X

(Available in SC and SFP type connectors, Singlemode or Multimode)• Supports Jumbo Frame up to 10240 Bytes• Support store and forward transmission• Relay output for power fail alarm• IP-40 housing• DIN-Rail or Panel Mount

IntroductionThe iMC2G is an industrial grade gigabit media converter which enables conversion of 10/100/1000Base-TX to 1000Base-X. It supports an operating temperature range of -40 to +85ºC, and is available with dual input DC supplies, or a single universal AC/DC supply with a low voltage DC backup supply.

SpecificationsModel Number iMC2G Multimode iMC2G Singlemode iMC2G SFPPhysical Ports10/100/1000 Base-T(X) Ports in RJ45, Auto MDI/MDIX 1 1 1


Fiber Ports standard 1000Base-SX 1000Base-LX -

Fiber Mode Multimode Singlemode -

Fiber Diameter (µm) 62.5/125 μm 50/125 μm 9/125 µm -

Fiber Optical Connector SC/ST SC/ST -

Typical Distance (Km) 0.55 Km 10 Km -

Wavelength (nm) 850 nm 1310 nm -

Max. Output Optical Power (dbm) -4 dbm -3 dbm -

Min. Output Optical Power (dbm) -9.5 dbm -9.5 dbm -

Max. Input Optical Power (Saturation) 0 dbm -3 dbm -

Min. Input Optical Power (Sensitivity) -18 dbm -20 dbm -

Link Budget (db) 8.5 db 10.5 db -

1000Base-X SFP port - - 1

Technology

Ethernet StandardsIEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TXIEEE 802.3ab for 1000Base-TIEEE 802.3z for 1000Base-X

Jumbo Frame 10240 Bytes

LED indicatorsPower / Ready Indicator Green : Power LED x 2

Fault Indicator Amber : Indicate power failure

10/100/1000Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for 100Mbps indicator.

1000Base-X Port Indicator Green for port Link/Act

Fault ContactRelay Relay output to carry capacity of 1A at 24 VDC

DIP Switch Relay output function enable / disable by dip switch

Power

Input PowerLV input: 10 to 48VDC, MV input: 36-72VDC or, HV: Single input universal supply 120-370VDC or 85-264VAC with a single 10-48VDC Backup.

Power Consumption (Typ.) 3.5 Watts

Overload Current Protection Present

Reverse Polarity Protection Present on terminal block


Dimension (W x D x H) 52 (W) x 106.1 (D) x 144.3 (H) mm (2.05 x 4.18 x 5.68 inch)

Weight (g) 400g




Regulatory approvalsEMI FCC Part 15, CISPR (EN55022) class A


Shock IEC60068-2-27



Safety EN60950-1


iS5com

.com

C O MiMC2G

TM

10/100/100T

1

2

FaultP1 P2

LINK / ACT

C O MiMC2G

TM

10/100/100T

1

2

FaultP1 P2

TX

LINK / ACT

RX

C O MiMC2G

TM

10/100/100T

1

2

FaultP1 P2

TX

LINK / ACT

RX

Connections of Media Converter

Fibe

r Por

t Spe

cific

atio

n







iMC2G LV D 1GRJ45 1GSSC10

iMC2G | | | | Core assembly and packaging

LV | | | 24VDC (18-36VDC)

MV | | | 48 VDC (36-72VDC)

HV | | | 88-300VDC or 85-264VAC




1GRJ45 | 10/100/1000Base-TX RJ45

1GMSC05 1000LX Multimode SC, 850nm, 500m

1GMST05 1000LX Multimode ST, 850nm, 500m

1GSSC10 1000LX Singlemode SC, 1310nm,10km

1GSST10 1000LX Singlemode ST, 1310nm, 10km

1GSSC25 1000LX Singlemode SC, 1310nm, 25km

1GSST25 1000LX Singlemode SC, 1310nm, 25km

1SFP** 1000SX SFP (Blank no optical transceiver)

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONSExample order code: iMC2G-LV-D-1GRJ45-1GSSC10-C1 Description: Gigabit Media Converter, Power Supply: Dual Input (10-48VDC), DIN Rail Mount, 1x10/100/1000Base-T(X) RJ45, 1x1000Base-F(X), Singlemode SC, 10Km Port, Conformal Coating C1=Add for conformal coating, FW – Leave blank for latest firmware


iMC2G (cont.)Industrial Gigabit Ethernet Media Converter


Media ConvertersiMC2SIntelligent 2 Port Ethernet to Fiber Converter

Features• Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X• Supports Ethernet to fiber or Ethernet to SFP port• Supports LFP (Link Fault Pass-through) function• Supports full/half duplex operation• Supports store and forward transmission• DIP-Switch to set various function• Rigid - IP-40 Galvanized Steel -40 to +85 degrees C • DIN-Rail and wall mount

IntroductioniMC2S is an industrial grade media converter for conversion of 10/100Base-T(X) to 100Base-FX. iMC2S supports MDI/MDIX auto detection. The iMC2S is a reliable media converter that will operate in the harshest environments.iMC2S also supports the LFP (Link Fault Pass-through) feature. The DIP-Switch enables the LFP function, enabling the iMC2S to force a link to shutdown immediately when the other link fails, giving the application

software a chance to react to the situation.

SpecificationsModel Number iMC2S-MM iMC2S-SS iMC2S-SFPPhysical Ports10/100 Base-T(X) Port in RJ45 Auto MDI/MDIX 1 1 1



Fiber Mode Multi-mode Single-mode











Technology

Ethernet StandardsIEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-T(X) and 100Base-FX,IEEE 802.3x for Flow control


DIP-Switch setting


PowerInput power Dual DC inputs 10 to 48VDC






Weight (g) 218 g







Shock IEC60068-2-27



Safety EN60950-1


iS5com

.com


Fibe

r Por

t Spe

cific

atio

n







iMC2S LV D 1RJ45 1MMSCiMC2S | | | | Core assembly and packaging

LV | | | Dual Input (10-48VDC)D | | DIN Rail MountingP | | Panel MountingN | | No Mounting Hardware

1RJ45 | 10/100 Base TX RJ451MMSC 100FX Multimode SC, 1310nm, 2Km1MMST 100FX Multimode ST, 1310nm, 2Km1SSC15 100FX Singlemode SC, 1310nm, 15km1SST15 100FX Singlemode ST, 1310nm, 15km1SSC40 100FX Singlemode SC, 1310nm, 40km1SST40 100FX Singlemode ST, 1310nm, 40km1SSC60 100FX Singlemode SC, 1310nm, 60km1SST60 100FX Singlemode ST, 1310nm, 60km1SSC80 100FX Singlemode SC, 1550nm, 80km1SST80 100FX Singlemode ST, 1550nm, 80km1SSC100 100FX Singlemode SC, 1550nm, 100km1SST100 100FX Singlemode SC, 1550nm, 100km1SFP 100X SFP (Blank no optical transceiver**)

(SFP**) SEE ACCESSORIES FOR SFP TRANSCEIVER PRICING Example order code: iMC2S-LV-D-1RJ45-1MMSC-C1Description: Media Converter, Power Supply: Dual Input (10-48VDC), DIN Rail Mount, 1x10/100base-T(X) port, 1x100Base FX, Singlemode SC, 2Km port, Conformal CoatingC1=Add for conformal coating


iMC2S (cont.)Intelligent 2 Port Ethernet to Fiber Converter


Media ConvertersiMC3Industrial 3 Port Ethernet to Fiber Media Converter

Features• 2 x 10/100Base-T(X) with auto-negotiation and auto-MDI/MDI-X• 1 x 100 Base- F(X)• Rigid - IP-40 Galvanized Steel -40 to +85 degrees C • DIN-Rail and Wall-mount

IntroductioniMC3 is an intelligent media converter providing media conversion between 10/100Base-TX and 100Base-FX. The iMC3 is a reliable media converter which will operate in harshest environments.

SpecificationsModel Number iMC3 Multimode iMC3 SinglemodePhysical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2 2

Fiber Ports Number 1 1












Technology

Ethernet Standards IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FX

LED indicatorsPower Indicator Green : Power LED x 2

10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Duplex/Collision

100Base-FX Fiber Port Indicator Green for fiber port Link/Act

Power

Input PowerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply 120-370VDC or 85-264VAC with a single 10-48VDC Backup.



Reverse Polarity Protection Internal

Physical CharacteristicEnclosure IP-40 Galvanzied Steel


Weight (g) 210 g





EMI FCC Part 15, CISPR (EN55022) class A


Shock IEC60068-2-27



Safety EN60950-1


iS5com

.com

Connections of Media Converter

Fibe

r Por

t Spe

cific

atio

n




Ordering Information

Base Power Supply Mount Ethernet

Port 1Ethernet Port 2


iMC3 HV D 1RJ45 1RJ45 1SST40

iMC3 | | | | | Core assembly and packaging

LV | | | | Dual Input (10-48VDC)

MV | | | | Dual Input (36-72VDC)

HV | | | | Single Input 88-370VDC or 85-264VAC with Single 10-48VDC Backup

D | | | DIN Rail Mounting

P | | | Panel Mounting

N | | | No Mounting Hardware

| XX | None

1RJ45 1RJ45 | 10/100Base TX RJ45

1MMSC 100FX Multimode SC, 1310nm, 2Km

1MMST 100FX Multimode ST, 1310nm, 2Km











(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONSExample order code: iMC3-LV-D-1RJ45-1RJ45-1MMSC-C1Description: Media Converter, Power Supply: Dual Input (10-48VDC), DIN Rail Mount, 1x10/100Base-T(X) RJ45 Port, 1x10/100Base-T(X) RJ45 Port, 1x100F(X) Multimode SC, Conformal CoatingC1=Add for conformal coating, FW – Leave blank for latest firmware


iMC3 (cont.)Industrial 3 Port Ethernet to Fiber Media Converter


Media ConvertersiMC4Industrial 2 Port 10/100 Base (TX) to 2 Port 100 Base (X) Ethernet Converter

Features• Supports 2 port 10/100Base-T(X) auto-negotiation and

auto-MDI/MDI-X• Coverts Ethernet copper to Ethernet Fiber (SFP)• Supports LFP (Link Fault Pass-through) function• Supports full/half duplex operation• Supports store and forward transmission• DIP-Switch to set various function• Rigid - IP-40 Galvanized Steel -40 to +85 degrees C • DIN-Rail and wall mount

IntroductioniMC4 is an industrial grade media converter for conversion of 10/100Base-T(X) to 100Base-X. iMC4 supports MDI/MDIX auto detection. The iMC4 is a reliable media converter that will operate in the harshest environments.

iMC4 also supports the LFP (Link Fault Pass-through) feature. The DIP-Switch enables the LFP function, enabling the iMC4 to force a link to shutdown immediately when the other link fails, giving the application software a chance to react to the situation.

SpecificationsModel Number iMC4

Physical Ports

10/100 Base-T(X) Port in RJ45 Auto MDI/MDIX 2

100Base-(X) SFP port 2

Technology

Ethernet StandardsIEEE 802.3 for 10Base-T,IEEE 802.3u for 100Base-T(X) and 100Base-FX,IEEE 802.3x for Flow control


DIP-Switch setting


Power

Input Power Dual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Dual input universal supply 120-370VDC or 85-264VAC.




Physical Characteristic

Enclosure IP-40 Galvanzied Steel

Dimension (W x D x H) 76.1 (W) x 150.5 (D) x 154.3 (H)mm (3.0 x 5.92 x 6.08 inches)

Weight (g) 318 g

Environmental

Storage Temperature -40 to 85ºC (-40 to 185ºF)






Shock IEC60068-2-27



Safety EN60950-1

Warranty

Warranty 5 Years

iS5com

.com





iMC4 (cont.)Industrial 2 Port 10/100 Base (TX) to 2 Port 100 Base (X) Ethernet Converter


Base Power Supply 1

Power Supply 2 Mount Ethernet

Port 1Ethernet Port 2 Description

iMC4 HV HV D 2RJ45 2SFP

iMC4 | | | | | Core assembly and packaging

LV LV | | | Input (10-48VDC)

MV MV | | | Input (36-72VDC)

HV HV | | | Input 88-370VDC or 85-264VAC




2RJ45 | 2 x 10/100 Base TX RJ45

2SFP 2 x 100 Base X SFP (Blank no optical transceiver**)

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONSExample order code: iMC4-HV-HV-D-2RJ45-2SFP-C1 Description: iMC4 Media Converter, Dual Power Supplies Input 88-370VDC or 85-264VAC, DIN Rail Mount, 2x10/100Base T(X), 2x100Base-(X), Conformal Coating C1=Add for Conformal coating



Media ConvertersiMC4GIndustrial 2 Port 100/1000 Base (TX) to 2 Port 100/1000 Base (X) Ethernet Converter

Features• Supports 2 port 100/1000Base-T(X) auto-negotiation and

auto-MDI/MDI-X• Converts Ethernet copper to Ethernet Fiber (SFP)• Supports LFP (Link Fault Pass-through) function• Supports full/half duplex operation• Supports store and forward transmission• DIP-Switch to set various function• Rigid - IP-40 Galvanized Steel -40 to +85 degrees C • DIN-Rail and wall mount

IntroductioniMC4G is an industrial grade media converter for conversion of 100/1000Base-T(X) to 100/1000 Base (X) SFP. iMC4G supports MDI/MDIX auto detection. The iMC4G is a reliable media converter that will operate in the harshest environments.

iMC4G also supports the LFP (Link Fault Pass-through) feature. The DIP-Switch enables the LFP function, enabling the iMC4G to force a link to shutdown immediately when the other link fails, giving the application software a chance to react to the situation.

SpecificationsModel Number iMC4GPhysical Ports100/1000 Base-T(X) Port in RJ45 Auto MDI/MDIX 2

100/1000 Base (X) SFP Port 2

Technology

Ethernet Standards IEEE 802.3u for 100Base-T(X) and 100Base-FX, IEEE 802.3x for Flow control


Power

Input powerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Dual input universal supply 120-370VDC or 85-264VAC.





Dimension (W x D x H) 76.1 (W) x 150.5 (D) x 154.3 (H)mm (3.0 x 5.92 x 6.08 inches)

Weight (g) 318 g







Shock IEC60068-2-27



Safety EN60950-1



Base Power Supply 1

Power Supply 2 Mount Ethernet

Port 1Ethernet Port 2 Description

iMC4G HV HV D 2RJ45 2GSFP

iMC4G | | | | | Core assembly and packaging

LV LV | | | Input (10-48VDC)

MV MV | | | Input (36-72VDC)

HV HV | | | Input 88-370VDC or 85-264VAC




2RJ45 | 2 x 100/1000 Base TX RJ45

2GSFP 2 x 100/1000 Base X SFP (Blank no optical transceiver**)

(SFP**) SEE ACCESSORIES FOR SFP TRANSCEIVER PRICINGExample order code: iMC4G-HV-HV-D-2RJ45-2SFP-C1Description: iMC4G Media Converter, Dual Power Supplies Input 88-370VDC or 85-264VAC, DIN Rail Mount, 2x100/1000Base T(X), 2x100/1000Base-(X) Conformal Coating C1=Add for Conformal coating

iS5com

.com





iMC4G (cont.)Industrial 2 Port 100/1000 Base (TX) to 2 Port 100/1000 Base (X) Ethernet Converter



Media ConvertersiPS2Industrial 1 Port Gigabit PoE Splitter

Features• Fully compliant with IEEE 802.3at standard• Supports 10/100/1000Base-T(X) for PoE In and Data Out• Power Isolation and Short Circuit Protection for Power Output• Automatic protection for Over-Voltage Power Input• Supports Power Output of up to 30 Watts• IP-40 Case Design• DIN-Rail and Panel Mount Design

IntroductionThe iPS2 is a PoE Splitter for use in Power over Ethernet systems. With an Ethernet Input (data + power) port and Output (data only) port, the iPS2 will split power from an existing LAN cable and convert it up to 24VDC/1.25A for power-hungry applications such as wireless APs, security cameras, and IP Phones. The internal current limiter, as well as, short-circuit and overload protection have been implemented so that the iPS2 may be used as a DC power supply.

Practical Operation

Connectors and Pin Definitions[ PoE Pin Definition 1 ]1000 Base-T

RJ-45 Input (Data and Power) RJ-45 Output (Data Only)Pin No. Symbol Description Symbol Description

1 BI_DA+ Data BI_DA+ BI_DA+ Data BI_DA+

2 BI_DA- Data BI_DA- BI_DA- Data BI_DA-

3 BI_DB+ Data BI_DB+ BI_DB+ Data BI_DB+

4 BI_DC+ (VDC+) Data BI_DC+ and Feeding Power(+) BI_DC+ Data BI_DC+ Data BI_DC+

5 BI_DC- (VDC+) Data BI_DC- and Feeding Power(+) BI_DC- Data BI_DC-

6 BI_DB- Data BI_DB- BI_DB- Data BI_DB-

7 BI_DD+ (VDC-) Data BI_DD+ and Feeding Power(-) BI_DD+ Data BI_DD+

8 BI_DD- (VDC-) Data BI_DD- and Feeding Power(-) BI_DD- Data BI_DDNote

10/100 Base-T(X)RJ-45 Input (Data and Power) RJ-45 Output (Data Only)

Pin No. Symbol Description Symbol Description

1 Rx+ Data Receive Rx+ Data Receive

2 Rx- Data Receive Rx- Data Receive

3 Tx+ Data Transmit Tx+ Data Transmit

4 VDC+ Feeding power(+) NC Not Connected

5 VDC+ Feeding power(+) NC Not Connected

6 Tx- Data Transmit Tx- Data Transmit

7 VDC- Feeding power(-) NC Not Connected

8 VDC- Feeding power(-) NC Not Connected

Note: Pins 7 and 8 (-VDC) should not be shorted to ground.

[ PoE Pin Definition 2 ]1000 Base-T

RJ-45 Input (Data and Power) RJ-45 Output (Data Only)Pin No. Symbol Description Symbol Description

1 BI_DA+ (VDC+) Data BI_DA+ and Feeding Power(+) BI_DA+ Data BI_DA+

2 BI_DA- (VDC+) Data BI_DA- and Feeding Power(+) BI_DA- Data BI_DA-

3 BI_DB+ (VDC-) Data BI_DB+ and Feeding Power(-) BI_DB+ Data BI_DB+

4 BI_DC+ Data BI_DC+ BI_DC+ Data BI_DC+

5 BI_DC- Data BI_DC- BI_DC- Data BI_DC-

6 BI_DB- (VDC-) Data BI_DB- and Feeding Power(-) BI_DB- Data BI_DB-

7 BI_DD+ Data BI_DD+ BI_DD+ Data BI_DD+

8 BI_DD- Data BI_DD- BI_DD- Data BI_DDRJ

10/100 Base-T(X)RJ-45 Input (Data and Power) RJ-45 Output (Data Only)

Pin No. Symbol Description Symbol Description

1 Rx+ (VDC+) Data Receive and Feeding power(+) Rx+ Data Receive

2 Rx- (VDC+) Data Receive and Feeding power(+) Rx- Data Receive

3 Tx+ (VDC-) Data Transmit and Feeding power(-) Tx+ Data Transmit

4 NC Not Connected NC Not Connected


6 Tx- (VDC-) Data Transmit and Feeding power(-) Tx- Data Transmit



Note: Pins 3 and 6 (VDC -) should not be shorted to ground.

iS5com

.com

iPS2

10/100/1000T

PoE IN

Data OUT

PWR

iPS2

10/100/1000T

PoE IN

Data OUT

PWR

iPS2

iES12GPiES8

Data + Power

Power

Data Out

PoEIN

Reset

PWR1PWR2

R.MiRingFault

Console

P8

P7

P3

P1

P5

P4

P2

P6

C O MTM

iES8

LINK / ACT

21

3 4

65

87PoE

1000X

G9

G10

G11

G12

G8

G2

G4

G6

G1

10/100/1000T

G7

G5

G3

iES12GPC O M

TM


Console

Reset

PoE Splitter Connections




SpecificationsModel Number iPS2Physical PortsRJ-45 Ethernet Port with P.S.E. Input 1

RJ-45 Ethernet Port Output 1

Power Output Connector 4-pin terminal block

Operating VoltageInput Voltage 36 ~ 57 VDC

Output Voltage 24V @ 1.25A max.

LED indicators

Power indicator PWR / Ready: 1 x LEDBlue On: Power is on and is functioning Normally.

ProtectionShort Circuit Protection Present

Over Load Protection Present

Isolation Protection 1500V



Weight (g) 250g

EnvironmentalStorage Temperature -40 to 80°C (-40 to 176°F)

Operating Temperature -20 to 70°C (-4 to 158°F)



EMSEN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Safety EN60950-1




Base Power Supply Mount Port 1 Ports 2 Description

iPS2 LV D 1RJ45 1RJ45

iPS2 | | | | Core assembly and packaging





1RJ45 1RJ45 1 x 10/100/1000Base-TX RJ45

Example order code: iPS2-MV-D-1RJ45-1RJ45-C1Description: 1 Port Gigabit POE Splitter, Power Supply: Dual Input (36-57VDC), DIN Rail Mount, 1x10/100/1000Base-T(X) RJ45 Port with P.S.E Input, 1x10/100/1000Base-T(X) RJ45 PortC1 – Add for conformal coating, FW – Leave blank for latest firmware

iPS2 (cont.)Industrial 1 Port Gigabit PoE Splitter


Serial ServersiDS6Intelligent 6 Port Device Server

Features• Redundant Dual Ethernet Ports: Recovery time < 10ms• Ethernet Switch Mode: Allows daisy chaining of multiple device servers• NAT-pass through: User can manage IDS6 through NAT router• Redundant Power Inputs• Redundant multiple host devices: 5 simultaneous in Virtual COM, TCP

Server, TCP Client mode, UDP• Secure Management by HTTPS and SSH• Serial Server Modes: Virtual Com, Serial Tunnel, TCP Server,

TCP Client, UDP• Event alarms via Syslog, Email, SNMP trap, and Integrated Buzzer• Supported operating systems: Windows NT/2000/ XP/2003/VISTA• Ethernet switch mode allows daisy chaining• Redundant facility to stream data to 5 host devices• Event alarms sent via e-mail• Secure management via HTTPS & SSH protocol • NAT router pass through • IP security table to prevent unauthorized access• Configurable by Web-browser and Windows utility

IntroductioniDS6 is a serial device server with 4 ports of serial RS232/422/485 to 2 redundant LAN ports. To ensure integrity and security of critical data, iDS6 offers many powerful redundancy features. The first feature provides protection against failure of an Ethernet LAN port, by automatically switching to another LAN port within 10ms to guarantee delivery via an alternative path.

iDS6 also supports an Ethernet switch mode allowing users to daisy chain several serial servers reducing the usage of Ethernet switch ports. Another feature in the iDS6 is the simultaneous transfer of data for up to 5 redundant Host Devices. This feature ensures that critical data is sent via alternative Ethernet paths and to multiple host PC’s ensuring data is not compromised by the Ethernet connections or potential host PC failure. With NAT pass through functionality, users are able to manage the iDS6 inside or outside the NAT router, making it easy for different IP domain users to use the iDS6.

ConfigurationThe iManage Software Suite utility can be used to configure the serial device server. This convenient utility allows easy management and monitoring facilities of all servers on the network.

iS5com

.com

5 redundant Host Devices

NAT router Pass Through

Ethernet Switch Mode




SpecificationsModel Number iDS6Physical Ports10/100 Base-T(X) Ports in RJ45Auto MDI/MDIX 2

Serial PortsConnector DB9 x 4

Operation Mode RS232 / RS422 / 4(2)-Wire RS485. Which can be configured by the windows configuraton utility

Serial Baud Rate 110 bps to 460.8 Kbps

Data Bits 5, 6, 7, 8

Parity odd, even, none, mark, space

Stop Bits 1, 1.5, 2

RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND

RS-422 Tx+,Tx-, Rx+, Rx-,GND

RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND

RS-485 (2-wire) Data+, Data-,GND

Flow Control XON/XOFF, RTS/CTS, DTR/DSR

LED IndicatorsPower indicator PWR 1(2) / Ready:

10/100TX RJ45 port indicator Red On: Power is on and booting up.

Serial TX / RX LEDs: Red Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.

Power

Redundant Input powerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply120-370VDC or 85-264VAC with a single 10-48VDC Backup



Reverse polarity protection Internal

Physical CharacteristicEnclosure IP-40 Galvanized Steel Housing

Dimension (W x D x H) 52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.)

Weight (g) 678 g




Regulatory ApprovalsEMI FCC Part 15, CISPR (EN55022) class A


Shock IEC60068-2-27



Safety EN60950




Port 1-2Serial Ports 3-6

Description

iDS6 LV D 2RJ45 4DB09

iDS6 | | | | Core assembly and packaging







2RJ45 | 2 x 10/100Base-TX RJ45

4DB09 4 x RS232/422/485 DB9 Ports

Example order code: iDS6-LV-D-2RJ45-4DB09-C1-F3.07Description: Device Server, Power Supply: Dual Input (10-48VDC), DIN Rail Mount, 2x10/100Base-T(X) Ports, 4xRS232/422/485 DB9 ports, Conformal Coating, Firmware Revision 3.07 C1=Add for conformal coating, FW – Leave blank for latest firmware


iDS6 (cont.)Intelligent 6 Port Device Server

Windows Configuration Utility


Serial ServersiDS6PIntelligent 6 Port Device Server

Features• Redundant Dual Ethernet Ports: Recovery time < 10ms• Ethernet Switch Mode: Allows daisy chaining of multiple device servers• NAT-pass through: User can manage iDS6P through NAT router• Redundant Power Inputs• Redundant multiple host devices: 5 simultaneous in Virtual COM, TCP

Server, TCP Client mode, UDP• Secure Management by HTTPS and SSH• Serial Server Modes: Virtual Com, Serial Tunnel, TCP Server,

TCP Client, UDP• Event alarms via Syslog, Email, and SNMP trap• Supported operating systems: Windows NT/2000/ XP/2003/VISTA• Ethernet switch mode allows daisy chaining• Redundant facility to stream data to 5 host devices • Event alarms by e-mail• Secure management via HTTPS & SSH protocols• NAT router pass through • IP table security to prevent unauthorized access • Configurable by Web-browser and Windows utility• 2KV port isolation for RS422/485 serial port• 1KV port isolation for PoE PD port

IntroductioniDS6P is a serial device server with 4 isolated RS422/485 serial ports to 2 redundant LAN ports. To ensure integrity and security of critical data, the IDS6P offers many powerful redundancy features. The first feature provides protection against failure of an Ethernet LAN port, by automatically switching to another LAN port within 10ms to guarantee delivery via an alternative path.

iDS6P also supports an Ethernet switch mode allowing users to daisy chain serial servers reducing the usage of Ethernet switch ports. Another feature in the iDS6P is the simultaneous transfer of data for up to 5 redundant Host Devices. This feature ensures that critical data is sent via alternative Ethernet paths and to multiple host PC’s ensuring data is not compromised by the Ethernet connection or potential host PC failure. With NAT pass through functionality, users are able to manage the iDS6P inside or outside the NAT router, making it easy for different IP domain users to use the iDS6P. The secondary Ethernet port supports PoE IEEE 802.3af allowing the device to be powered via the Ethernet cable instead of a separate power supply.

ConfigurationThe iManage Software Suite utility can be used to configure the serial device server. This convenient utility allows easy management and monitoring facilities of all servers on the network.

iS5com

.com

5 redundant Host Devices

NAT router Pass Through

Ethernet Switch Mode




SpecificationsModel Number iDS6PPhysical Ports10/100 Base-T(X) Ports in RJ45Auto MDI/MDIX 2

PoEPoE Present on ETH2Power Device (IEEE 802.3af): IEEE 802.3af compliant input interface, Power consumption: 8Watts max., Over load & short circuit protection, Isolation Voltage: 1000 VDC min., Isolation Resistance : 108 ohms min

Serial PortsConnector 5 pin terminal block x 4

Operation Mode RS422 / 4(2)-Wire RS485. Which can be configured by the windows configuration utility




Stop Bits 1, 1.5, 2




isolating 2KV


LED Indicators

Power indicatorPWR 1(2) / Ready: Red On: Power is on and booting up. Red Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. Green On: Power is on and functioning Normally. Green Blinking: Located by Administrator.

10/100TX RJ45 port indicator Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.

Serial TX / RX LEDs: Red: Serial port is receiving data, Green: Serial port is transmitting data

Power

Redundant Input power Dual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply120-370VDC or 85-264VAC with a single 10-48VDC Backup





Dimension (W x D x H) 52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.)

Weight (g) 667 g






Shock IEC60068-2-27



Safety EN60950




Port 1POE Port 2

Serial Ports 3-6

Description

iDS6P LV D 1RJ45 1RJ45 4PL05

iDS6P | | | | | Core assembly and packaging







1RJ45 | | 10/100Base TX RJ45

1RJ45 | POE Port RJ45 with Isolation

4PL05 4 x Pluggable 5 Pin RS422/485

Example order code: iDS6P-LV-D-1RJ45-1RJ45-4PL05-C1-F3.07Description: Device Server with PoE, Power Supply: Dual Input (10-48VDC), DIN Rail Mount, 1x10/100base-T(X) Port, 1xRJ45 PoE Port with Isolation, 4xRS422/485 5 pin ports, Conformal Coating, Firmware Revision 3.07 C1=Add for conformal coating, FW – Leave blank for latest firmware

iDS6P (cont.)Intelligent 6 Port Device Server

Windows Configuration Utility



iDS6P (cont.)Intelligent 6 Port Device Server



Serial ServersiDS6WIntelligent 4 Port Secure Serial to IEEE 802.11 b/g Wireless Device Server

Features• WLAN interface supports up to 54Mbps link speed• Modes of Operation: Virtual Com, Serial Tunnel, TCP Server,

TCP Client, UDP• Redundant multiple host devices: host devices: Virtual COM, TCP

Server, TCP Client mode, IP ranges: UDP• NAT Pass-Through: Manageable through NAT router• High Security Capability:

- SSL data encryption; secured management by HTTPS and SSH; - IP Access: IP White List; - Wireless: WEP/WPA/WPA2/802.1X/TKIP

• Internet Communication: PPPoE authentication• Update DNS Hostname: DDNS• Dual redundant Ethernet port support redundant mode

(Recovery time < 10ms)• Supports Daisy Chain• Event Warning by Syslog, Email, SNMP trap, Relay and Beeper• Configurable by Web-based and Windows utility (DS-Tool)• Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/

VISTA(32/64bit)/Windows7(32/64bit)

IntroductionThe iDS6W is an intelligent secure 4-port RS232/422/485 to 802.11b/g WLAN, with speeds up to 54Mbps, and a 2 port LAN device server. It supports the standard features, such as a TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the DS-Tool utility allows the configuration of multiple devices and mappings of Virtual Com. The NAT Router Pass-Through features, DDNS, and PPPoE, making it convenient for administrators to configure the device servers remotely through the NAT router from different IP domains or via the Internet. The iDS6W can simultaneously transfer data to 5 redundant host PC’s to avoid Ethernet connectivity breakdown or any host PC failures. The iDS6W supports security features such as HTTPS, SSH, SSL encryption, and 802.1X to assuring secure data transmission.

The iDS6W provides dual redundant power inputs; 10-48VDC, 36-72VDC, or a universal 85-370VDC/85-264VAC with a single 10-48VDC backup for continuous operation, and a wide operating temperature, -40~85°C, in an IP-40 housing. The iDS6W is the best suited where the high demand for secure serial to WLAN critical data communication is required in the harshest of environments.

SpecificationsServer Model iDS6WPhysical Ports10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 2

WLAN FeatureOperating Mode Client mode

Antenna and Connector 2dBi antenna on reversed SMA connector

Radio Frequency Type DSSS, OFDM

Modulation IEEE802.11b : CCK, DQPSK, DBPSKIEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM

Frequency Band America/FCC : 2.412~2.462 GHz (11 channels) Europe CE/ETSI : 2.412~2.472 GHz (13 channels)

Transmission Rate IEEE802.11b : 1/ 2/ 5.5/ 11 MbpsIEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps

Transmit Power IEEE802.11b/g : 18dBm

Receiver Sensitivity -81dBm @ 11Mbps, PER< 8%; -64dBm @ 54Mbps, PER< 10%

Encryption SecurityWEP : (64-bit ,128-bit key supported)WPA /WPA2 : IEEE802.11i(WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) TKIP encryption802.1x Authentication supported

Serial PortsConnector DB9(male) x 4

Operation Mode RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-




Stop Bits 1, 1.5, 2

RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND





Network Features

Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS

Power

Redundant Input powerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply 88-370VDC or 85-264VAC with a single 10-48VDC Backup



Reverse polarity protection Present


Dimension (W x D x H) 101.6(W) x 124.9(D) x 153.8(H) mm (4.00 x 4.92 x 6.05 inch.)

Weight (g) 691 g


Operating Temperature -40 to 85ºC (14 to 158°F)




Shock IEC60068-2-27



Safety EN60950-1


iS5com

.com



iDS6W (cont.)Intelligent 4 Port Secure Serial to IEEE 802.11 b/g Wireless Device Server


Base Power Supply Mount Port 1 Port 2 Serial Ports

3-6 Description

iDS6W LV D 1RJ45 1RJ45 4DB09

iDS6W | | | | | Core assembly and packaging







1RJ45 1RJ45 | 10/100Base TX RJ45

4DB09 4 x RS232/422/485 DB09 Example order code: iDS6W-LV-D-1RJ45-1RJ45-4PL05-C1-F3.07 Description: Device Server, Power Supply: Dual Input (10-48VDC), DIN Rail Mount, 1x10/100base-T(X) port, 1xRJ45 PoE 1x10/100base-T(X) port, 4xRS422/485 5 pin ports, Conformal Coating, Firmware Revision 3.07C1=Add for conformal coatingFW=Leave blank for latest revision




IEC 61850 SwitchesiES20GFIntelligent 20 Port Managed Ethernet Switch IEC 61850, IEEE 1613 and EN50155

Features• Up to 16x10/100Base (TX), and up to 4x100/1000Base (X) ports• Fastest Redundant Ethernet Ring : iRing (recovery time <30ms with up

to 250 Ethernet Switches)• iBridge supports other vendors’ ring technology in open architecture• STP/RSTP/MSTP supported• Supports PTP Client (Precision Time Protocol) clock synchronization• IGMP v2/v3 (IGMP snooping for support) filtering

multicast traffic• Port Trunking for easy of bandwidth management• SNMP V1/V2c/V3 support for secured network management• RMON for traffic monitoring• Supports LLDP protocol• MRP: Media Redundancy Protocol (MRP) IEC 62439-2• Event notification through Syslog, Email, SNMP trap,

and Relay Output• Port lock to prevent access from unauthorized MAC address• Windows utility (iManage Software Suite) supporting centralized

management and configurable by Web-based, Telnet, and Console (CLI)

• Supports two Gigabit combo ports• Rigid IP-40 housing design• DIN-Rail and wall mount

IntroductionThe iES20GF managed Ethernet switch with Ethernet Redundancy protocols such as iRing (recovery time <30ms with up to 250 Ethernet Switches), iBridge, and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions to restore connectivity using its fast recovery technology. The unique iBridge technology now provides a means to complement and interconnect with most third party proprietary ring technologies. The switch can be managed centralized and convenient by a powerful windows utility called the iManage Software Suite. The product is made from galvanized steel and has a wide operating temperature from -40°C to 85°C suitable for the harshest of environments without the use of fans.

The iES20GF is fully compliant with industry standards such as IEC 61850, IEEE 1613, and EN50155, with an operating temperature from -40 to +85 degrees C and redundancy support through functions like iRing and STP/ RSTP/MSTP assuring protection of all mission critical network applications.

iManage Software SuiteThe iManage Software Suite provides users a way to conveniently manage and monitor all of the Ethernet switches on the network.

iS5com

.com

Network Topology View

Network Connection

Monitoring and Configuration Interface



SpecificationsModel Number iES20GFPhysical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX Up to 16

Gigabit combo Port with 10/100/1000Base-T(X) and 100/1000Base-X SC/ST/LC/SFP Ports

Up to 4

Technology

Ethernet Standards

IEEE 802.3i for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3z for 1000Base-X, IEEE 802.3ab for 1000Base-TXIEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol ), IEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table 8192 MAC addresses

Priority Queues 4


Switch PropertiesSwitching latency : 9 μs Switching bandwidth : 11.2GbpsMax. Number of Available VLANs : 4095, IGMP multicast groups : 1024Port rate limiting : User Define

Security Features

Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1Q ) to segregate and secure network traffic, Supports Q-in-Q VLAN for performance & security to expand the VLAN space, Radius centralized password management, SNMP v1/v2c/v3 encrypted authentication and access security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s), Redundant Ring (iRing) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP v2/v3 (IGMP snooping support) for multicast filtering, Port configuration, status, statistics, monitoring, security SNTP for synchronizing of clocks over network, Support PTP Client (Precision Time Protocol) clock synchronization DHCP Server / Client supportPort Trunk support, MVR (Multicast VLAN Registration) support

Network Redundancy iRing, iBridge, STP, RSTP, MSTP

Warning / Monitoring SystemRelay output for fault event alarmingSyslog server / client to record and view eventsInclude SMTP for event warning notification via emailEvent selection support

RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1

LED IndicatorsPower Indicator Green : Power LED x 3

R.M. Indicator Green : Indicates that the system is operating in iRing master mode

iRing Indicator Green : Indicates that the system is operating in iRing mode

Fault Indicator Amber : Indicates unexpected event occurred

Power Indicator Green : Power LED x 3

10/100/1000Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for 100Mbps indicator

100/1000Base-X SFP Port Indicator Green for port Link/Act.

Fault ContactRelay Relay output capacity: 1A at 24VDC

Power

Redundant Input Power Dual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply 120-370VDC or 85-264VAC with a single 10-48VDC Backup

Power Consumption (Typ.) 12 Watts




Dimension (W x D x H) 96.4(W)x108.5(D)x154(H) mm (3.8 x 4.27 x 6.06 inch)

Weight (g) 1220 g

EnvironmentalStorage Temperature -40°C to 85°C (-40°F to 185°F)

Operating Temperature -40°C to 85°C (-40°F to 158°F)


Regulatory ApprovalsPower Automation IEC 61850-3, IEEE 1613

EMI FCC Part 15, CISPR (EN55022) class A

EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Shock IEC60068-2-27



Safety EN60950-1



Supply MountEthernet Port 1-8

Ethernet Port 9-16

Ethernet Port 17†

Ethernet Port 18†

Ethernet Port 19†

Ethernet Port 20†

Description

iES20GF HV D 8RJ45 8RJ45 1GSSC30 1GSSC30 1GSSC50 1GSSC50

iES20GF | | | | | | | |Managed core assembly and packaging

LV | | | | | | | Dual Input (10-48VDC)

MV | | | | | | | Dual Input (36-72VDC)

HV | | | | | | |

Single Input 120-370VDC or 85-264VAC with Single 10-48VDC Backup

D | | | | | | DIN Rail Mounting

P | | | | | | Panel Mounting

N | | | | | | No Mounting Hardware

| XX | | | | None

8RJ45 8RJ45 | | | | 8 X 10/100Base TX RJ45

XX XX | | None

1GRJ45 1GRJ45 | | 10/100/1000 Base TX RJ45

1GSFP** 1GSFP** | |1000Base (X) SFP (Blank no SFP transceiver)

1MMSC 1MMSC 1MMSC 1MMSC 100FX Multimode SC, 2Km

1MMST 1MMST 1MMST 1MMST 100FX Multimode ST, 2Km

1SST30 1SST30 1SST30 1SST30 100FX Singlemode ST, Standard 30km

1SSC30 1SSC30 1SSC30 1SSC30 100FX Singlemode SC, Standard 30km

1SSC50 1SSC50 1SSC50 1SSC50100FX Singlemode SC, Intermediate Reach 50km

1SSC90 1SSC90 1SSC90 1SSC90100FX Singlemode SC, Long Reach 90km

1GMMSC 1GMMSC 1GMMSC 1GMMSC 1000 LX Multimode ST, 2Km

1GMMST 1GMMST 1GMMST 1GMMST 1000 LX Multimode SC, 2Km

1GSST30 1GSST30 1GSST30 1GSST301000 LX Singlemode ST, Standard 30km

1GSSC30 1GSSC30 1GSSC30 1GSSC301000 LX Singlemode SC, Standard 30km

1GSSC50 1GSSC50 1GSSC50 1GSSC501000 LX Singlemode SC, Intermediate Reach 50km

1GSSC80 1GSSC80 1GSSC80 1GSSC801000 LX Singlemode SC, Long Reach 80km

XX XX None †Ports 17-20 must have the same connector type. (SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONSExample Order Code: iES20G-HV-D-8RJ45-8RJ45-1GSSC30-1GSSC30-1GSSC50-1GSSC50-C1-F3.07Description: 20 Port Gigabit Switch, Single Input 120-370VDC or 85-264VAC with Single 10-48VDC Backup, DIN Rail Mount, 16x10/100Base-T(X) Ports, 2x100/1000 LX Singlemode SC, 30Km Ports, 2x100/1000 LX Singlemode SC, 50Km Ports, Conformal Coating, Firmware version 3.07 C1=Add for conformal coating, FW – Leave blank for latest firmware


Port 1-8Ethernet Port 9-12

Ethernet Port 12-16

Ethernet Port 17-20 Description

iS20GF LV D XX 4GSFP 4GSFP 4GSFP

iS20GF | | | | | | Core assembly and packaging

LV | | | | | Dual Input (10-48VDC)

MV | | | | | Dual Input (36-120VDC)

HV | | | | | Dual Input 88-370VDC or 85-264VAC

D | | | | DIN Rail Mounting

P | | | | Panel Mounting

N | | | | No Mounting Hardware

8GRJ45 | | | 8 X 10/100/1000BaseTX RJ45

XX XX XX XX None

4GSFP 4GSFP 4GSFP 4 x 100/1000 BASE (X) SFP (Blank no SFP transceiver**)

iES20GF (cont.)Intelligent 20 Port Managed Ethernet Switch IEC 61850, IEEE 1613 and EN50155



iES20GF (cont.)Intelligent 20 Port Managed Ethernet Switch IEC 61850, IEEE 1613 and EN50155



IEC 61850 SwitchesiES26GIntelligent 26 Port Managed Gigabit Ethernet Switch IEC 61850-3 and IEEE 1613

Features• Suitable for Substation Automation Applications• Rapid Network Recovery: iRing (recovery time <30ms up to 250

Ethernet Switches)• iBridge is a unique feature that supports third party ring technologies• MSTP/RSTP/STP (IEEE 802.1s/w/D)• Secure ACL supported• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic• Port Trunking for bandwidth management• SNMP v1/v2c/v3 support for secure network management• Supports LLDP (Link Layer Discovery Protocol)• Port lock to prevent access from unauthorized MAC addresses• Event notification through Syslog, Email, SNMP trap, and Relay Output• iManage Software Suite supports centralization management and is

configurable via a Webbrowser,Telnet, Console (CLI)• Isolated Dual Redundant Power Supply Inputs with 12-36VDC or

36-72VDC or 100-240VAC power supply range• 19 inch rack mountable• Up to 24x10/100Base-T(X) Ports• 2 Gigabit SFP or RJ45 Optional Ports

IntroductionThe iES26G switch is a 26-port rack mount highly redundant Managed Gigabit Ethernet Switch, designed for the demanding environments required for power substation and rolling stock applications. The iES26G complies with IEC61850-3 and IEEE1613 standards. With Ethernet Redundancy protocols such as iRing (recovery time <30ms with up to 250 Ethernet switches), iBridge, and MSTP/RSTP/STP (IEEE 802.1s/w/D), the iES26G can protect all mission-critical applications from network interruptions and temporary malfunctions to restore connectivity quickly. The iBridge technology allows these switches to provide a means to complement and inter-operate with most third party proprietary ring technologies. The iES26G switch can be managed centrally and conveniently by our powerful windows utility called the iManage Software Suite.The iES26G switch provides a multi power, dual input, redundant design providing a combination of DC and/or AC inputs ensuring continuous operation. An IP-40 galvanized steel, fanless enclosure, and a wide operating temperature range of -40ºC to +85ºC to suit the harshest of environments. An additional relay output is provided for system alarm warning.

iManage Software SuiteThe iManage Software Suite provides users a way to conveniently manage and monitor all of the industrial Ethernet switches on the network.

iS5com

.com

Network Connection






SpecificationsModel Number iES26GPhysical Ports10/100 Base-T(X) Ports in RJ45Auto MDI/MDIX

24

Gigabit combo port with 10/100/1000Base-T(X) and/or 1000Base-X SFP

2

RS-232 Serial Console Port in back RS-232 console cable. 9600bps, 8, N, 1

Technology

Ethernet Standards

IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TXIEEE 802.3ab for 1000Base-TIEEE 802.3z for 1000Base-XIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol)IEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1X for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)


Priority Queues 4


Switch PropertiesSwitching bandwidth : 8.8GbpsMax. Number of Available VLANs:4095IGMP multicast groups: 1024Port rate limiting: User Define

Security Features

Enable/disable ports, MAC based port securityACL supportedPort based network access control (802.1x)VLAN (802.1q ) to segregate and secure network trafficRadius centralized password managementSNMP v1/v2c/v3 encrypted authentication and access security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)Redundant Ring (iRing) with recovery time less than 30ms over 250 Ethernet SwitchesTOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN tagging and GVRP supportedIGMP Snooping for multicast filteringPort configuration, status, statistics, monitoring, securitySNTP for synchronizing of clocks over networkSupport PTP Client (Precision Time Protocol) clock synchronizationDHCP Server / Client supportPort Trunk supportMVR (Multicast VLAN Registration) support

Network Redundancy

iRingiBridgeSTPRSTPMSTP


LED Indicators In Front And BackPower indicator Green: Power LED x 2

System Ready Indicator Green: Indicate system ready. Blinking for system is upgrading firmware.

Ring Master Indicator Green: Indicate system operated in iRing Master mode

iRing Indicator Green: Indicate system operated in iRing mode Blinking to indicate Ring is broken.

Fault indicator Amber: Indicate unexpected event occurred

10/100Base-T(X) RJ45 port indicator Green at left for port Link/Act. Amber at right for 100Mbps indicator

10/100/1000Base-T(X) RJ45 port indicator with combo port

Green at down for port Link/Act

1000Base-X SFP port indicator with combo port Green at up for port Link/Act

Fault ContactRelay Relay output to carry capacity of 1A at 24VDC

Power

Redundant Input power 12 ~ 36VDC power inputs

36 ~ 72VDC power inputs

88 ~300VDC/100 ~ 240VAC power inputs

Power consumption (Typ.) TBD TBD 18 Watts

Overload current protection Present Present Present on terminal block

Physical CharacteristicDimension (W x D x H) 443.7(W) x 262.7(D) x 44(H) mm (17.46 x 10.34 x 1.73 inch)

Enclosure IP-40 Galvanized Steel Housing

Weight (g) 4 Kg

EnvironmentalStorage Temperature -40 ~ 85℃ (-40 ~ 185℉)

Operating Temperature -40 ~ 85℃ (-40 ~ 185℉) No fans




EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-11



BasePower Supply 1

Power Supply 2

MountEthernet Port 1-8

Ethernet Port 9-16

Ethernet Port 17-24

Ethernet Port 25


iES26G HV LV R 8GRJ45 8GRJ45 XX 1GRJ45 1SFP**

iES26G | | | | | | | | Core assembly and packaging

LV LV | | | | | | 12-36VDC

MV MV | | | | | | 36-72VDC)

HV HV | | | | | | 88-300VDC or 100-240VAC

R | | | | | Rack Mount

P | | | | | Panel Mounting

N | | | | | No Mounting Hardware

| XX XX | | None

8GRJ45 8GRJ45 8GRJ45 | |8 X 10/100/1000 Base TX RJ45

XX XX None

1GRJ45 1GRJ45 10/100/1000 Base TX RJ45

1SFP** 1SFP**100/1000Base (X) SFP (Blank no SFP transceiver)

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONSExample order code: iES26G-HV-LV-R-8GRJ45-8GRJ45-XX-1GRJ45-1SFP**-C1-F3.07Description: 26 Port Gigabit Switch, Single Input Power Supply 1: 88-300VDC or 100-240VAC, Single Input Power Supply 2: 12-36VDC, Rack Mount, 8x10/100/1000Base-T(X) Ports, 8x10/100/1000Base-T(X) Ports, XX, 1x10/100/1000Base-T(X), 1x100/1000Base-X SFP, Conformal Coating, Firmware version 3.07 C1=Add for conformal coating, FW – Leave blank for latest firmware

iES26G (cont.)Intelligent 26 Port Managed Gigabit Ethernet Switch IEC 61850-3 and IEEE 1613



iES26G (cont.)Intelligent 26 Port Managed Gigabit Ethernet Switch IEC 61850-3 and IEEE 1613



iES28TGIntelligent 28 Port Configurable Gigabit Switch IEC 61850, IEEE 1613 and EN50155

Features• Supports up to 4 x 10 Gigabit Uplink Ports• Modular chassis allows for easy scalability and future proofing of

network designs • Supports iRing (recovery time < 30ms up to 250 units in one ring)• Supports STP, RSTP and MSTP• Supports Layer 3 routing, RIP and static routing function• Support IEEE 1588v2 PTP clock synchronization• IPv6 support• VLAN Priority: Supports priority-tagged frames to be received by

specific IEDs• MRP Media Redundancy Protocol as per IEC62439-2• Supports HTTPS/SSH protocol enhanced network security• Supports SNTP clock client• IP-based bandwidth management• Application-based QoS management• Device Linking security function• DOS/DDOS auto threat prevention• IGMP v2/v3 (IGMP snooping support)• SNMP v1/v2c/v3 & RMON and 802.1Q VLAN Network Management• Support ACL, TACACS+ and 802.1x User Authentication• Supports 9.6K Bytes Jumbo Frame• Multiple alarm notification methods• Administration by Web-browser ,Telnet, Console (CLI), and iManage

Software Suite configuration• LLDP (Link Layer Discovery Protocol)• Redundant hot swappable power supplies• 19 inch rack mount design

IntroductioniES28TG is a highly redundant and scalable Layer-3 managed Gigabit Ethernet switch with 4 modular slots. Designed to withstand the harshest environments of Transmission and Distribution substations and rolling stock applications. The iES28TG is fully compliant with industry standards such as IEC 61850, IEEE 1613, and EN50155, with an operating temperature from -40 to +85 degrees C and redundancy support through functions like iRing and STP/RSTP/MSTP assuring protection of all mission critical network applications.

iES28TG can also be managed conveniently via the iManage Software Suite, Telnet, and console (CLI) configuration.

• IP-based Bandwidth Management: The switch provides advanced IP-based bandwidth management limiting maximum bandwidth for each IP device. Users can configure an IP camera and NVR with dedicated bandwidth and limit the bandwidth of other devices.

• Application-Based QoS: The switch also supports application-based QoS. Application-based QoS can be set with the highest priority for data streaming according to TCP/UDP port number.

• Device Link Function: The special Device Link function permits only allowed IP addresses with a MAC address to access the network preventing unauthorized access to the network .

• Advanced DOS/DDOS Auto Prevention: Switch provides advance DOS/DDOS auto prevention. – This is a hardware based prevention. If there is a sudden surge in IP flow, the switch locks the source IP address temporarily and hence prevents network failure.

• IEEE 1588 Precision Time Protocol: IEEE 1588 PTPv2 provides precision time synchronization for protection and control applications such as SMV in the IEC 61850 process bus.

• Modular Design: Modular chassis design makes network planning easy by providing flexibility as your network grows and future proofing by developing modules based on newer standards.

iManage Software SuiteiManage Software Suite is a Windows utility provided to manage and monitor all the Ethernet switches on the network.

iS5com

.com

IEC 61850 Switches

iProvisioning




SpecificationsModel Number iES28TGPhysical Ports

Slot Number 4 (up to 3 slots for 8 x 1G ports each and 1 slot for 4 x 10G ports)

Technology

Ethernet Standards

IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3ab for 1000Base-TIEEE 802.z for 1000Base-XIEEE 802.3ae for 10Gigabit EthernetIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table 8k

Priority Queues 8


Switch Properties Switching latency: 7 us, Max. Number of Available VLANs: 256, IGMP multicast groups: 128 for each VLAN, Port rate limiting: User Defined

Jumbo frame Up to 9.6K Bytes

Security Features

Device Linking security feature.Enable/disable ports, MAC based port securityPort based network access control (802.1x), Single 802.1x and Multiple 802.1xMAC-based authentication, QoS assignment, Guest VLANMAC address limit, TACACS+VLAN (802.1Q ) to segregate and secure network trafficRadius centralized password managementSNMPv3 encrypted authentication and access securityWeb and CLI authentication and authorizationAuthorization (15 levels) via TACACS+IP source guard

Software Features

Hardware routing, RIP and static routingIEEE 1588v2 PTP clock synchronizationIEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)Multiple Registration Protocol (MRP)Multiple VLAN Registration Protocol (MVRP)MSTP (RSTP/STP compatible)Redundant Ring (iRing) with recovery time less than 30ms over 250 unitsTOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN tagging and GVRP supportedVoice VLANIGMP v2/v3 SnoopingIP-based bandwidth managementApplication-based QoS managementDOS/DDOS auto preventionPort configuration, status, statistics, monitoring, securityDHCP Server/Client/snoopingDHCP Relay, Modbus TCP DNS client proxy, ARP inspection, SMTP Client

Network Redundancy iRing, iBridge, MRP (Media Redundancy Protocol as per IEC62439-2)MSTP (RSTP/STP compatible)

RS-232 Serial Console Port RS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1

LED IndicatorsPower Indicator (PWR1 / PWR2) Green : Power LED x 2

System Ready Indicator (PWR)

Green : Indicates that the system ready. The LED is blinking when the system is upgrading firmware

Ring Master Indicator (R.M.) Green : Indicates that the system is operating in iRing Master mode

iRing Indicator (Ring) Green : Indicates that the system operating in iRing modeGreen Blinking : Indicates that the Ring is broken.

Fault Indicator (Fault) Amber : Indicate unexpected event occurred

Reset To Default Running Indicator (DEF) Green : System resets to default configuration

Supervisor Login Indicator (RMT) Green : System is accessed remotely

Smart LED Display systemLink/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) green LED indicator x 3Mode select(MODE) : Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) mode select buttonPort Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) LED show : Green x 28t

Fault ContactRelay Relay output capacity of 1A at 24VDC

PowerRedundant Input Power (Hot swappable option)

Dual Power Supplies available in any combination of 24VDC (Nom.), 48VDC (Nom.) and 88-264VAC (50/60Hz)/100-300VDC

Power Consumption 46 Watts (68VA max)

Overload Current Protection Fast Acting Fuse 3.15A (can only be replaced in factory)

Installation Category Overvoltage Category III, Pollution degree II

Physical CharacteristicEnclosure 19 inches rack mountable made from galvanized steel

Weight (g) 6600g

Dimension (W x D x H) 440 (W) x 325 (D) x 44 (H) mm (17.32 x 12.8 x 1.73 inches)

EnvironmentalStorage Temperature -40 to 85oC (-40 to 185oF)

Operating Temperature -40 to 85oC (-40 to 185oF )




EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT),EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11



BasePower Supply 1

Power Supply 2


Ethernet Port 9-16

Ethernet Port 17-24

Ethernet Port 25&26

Ethernet Port 27&28

Description

iES28TG LV LV R 8GSFP** 8GSFP** XX XX XX

iES28TG | | | | | | | | Core assembly and packaging

XX XX | | | | | | None

LV LV | | | | | | 24VDC (18-36VDC)

MV MV | | | | | | 48 VDC (36-72VDC)

HV HV | | | | | | 88-300VDC or 85-264VAC

RF | | | | |

19" Rack Mount - Power terminal in the Front (same side as Ethernet ports)

RR | | | | |19" Rack Mount - Rear Mount Power Terminal connection



XX XX XX | | None

8GRJ45 8GRJ45 8GRJ45 | |8 X 10/100/1000Base TX RJ45 Module

8GSFP** 8GSFP** 8GSFP** | |8 X 100/1000Base (X) SFP (Blank no SFP transceivers) Module

XX XX Blank module

2TGSFP** 2TGSFP**2 X 10GE SFP (Blank no SFP transceiver)

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONS Example Order Code: iES28TG-LV-LV-R-8GRJ45-8GRJ45-8GRJ45-2TGSFP**-2TGSFP**-C1-F3.07Description: 28 Port Gigabit Switch, Single Input Power Supply 1: 24VDC (18-36VDC), Single Input Power Supply 2: 24VDC (18-36VDC), Rack Mount, 8x10/100/1000Base-T(X) Ports, 8x10/100/1000Base-T(X) Ports, 8x10/100/1000Base-T(X) Ports, 2x10GE SFP**, 2x10GE SFP**, Conformal Coating, Firmware version 3.07C1 – Add for conformal coating FW – Leave blank for latest firmware

iES28TG (cont.)Intelligent 28 Port Configurable Gigabit Switch IEC 61850, IEEE 1613 and EN50155




iES28TG (cont.)Intelligent 28 Port Configurable Gigabit Switch IEC 61850, IEEE 1613 and EN50155


IEC 61850 SwitchesiES10GFIntelligent 10 Port Managed Gigabit Ethernet Switch IEC61850, IEEE1613 Compliant

Features• Rapid Network Recovery: iRing recovery time < 20ms up to 250

ethernet switches• Complies with: IEC 61800-3 (variable speed drive systems) IEC 61000-

6-2 (generic industrial)• iBridge is a unique feature that supports third party ring technologies• Supports STP/RSTP/MSTP• Supports PTP Client (Precision Time Protocol) clock synchronization • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic• Port Trunking for easy bandwidth management• SNMP v1/v2c/v3 support for network management• Supports RMON traffic monitoring• Supports DDM (Digital Diagnostic Monitoring) function for SFP modules• Supports LLDP (Link Layer Discovery Protocol)• Port lock to prevent access from unauthorized MAC address• Event notifications via Syslog, Email, SNMP trap, and Relay Output• IP-40 Galvanized Steel Housing• DIN-Rail and wall mounting

IntroductionThe iES10GF is an intelligent managed Gigabit Ethernet Switch, IEC61850-3 and IEEE1613 compliant. The Intelligent Operating System (iOS) offers many powerful features including iRing delivering a total recovery time <20ms with up to 250 ethernet switches. The iBridge technology, and MSTP/RSTP/STP (IEEE 802.1s/w/D) feature set ensures that the best redundancy options are available to protect mission critical applications from network interruptions. Every function of the iES10GF can be managed conveniently using the iManage Software Suite. The iES10GF switch supports DDM (Digital Diagnostic Monitoring), which instantly monitors the status of electrical voltage, current, and temperature of the SFP module. The product is made from galvanized steel and has a wide operating temperature range from -40 to +85oC suitable for the harshest of environments without the use of fans.

SpecificationsModel Number iES10GFPhysical Ports10/100 Base-TX Ports (RJ45)Auto MDI/MDIX

7

Gigabit combo Ports with 10/100/1000Base-TX and 100/1000Base-X SFP Ports

3- Base T(X) or 3- Base (X) SFP

Technology

Ethernet Standards

IEEE 802.3 for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3z for 1000Base-XIEEE 802.3ab for 1000Base-TIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol )IEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)


Priority Queues 4


Switch Properties

Switching latency: 7 usSwitching bandwidth: 7.4GbpsMax. Number of Available VLANs: 4096IGMP multicast groups: 1024Port rate limiting: User Defined

Security Features

Enable/disable ports, MAC based port securityPort based network access control (802.1x)VLAN (802.1Q ) to segregate and secure network trafficSupports Q-in-Q VLAN for performance & security to expand the VLAN spaceRadius centralized password managementSNMP v1/v2c/v3 encrypted authentication and access security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)Redundant Ring (iRing) with recovery time less than 20ms up to 250 units TOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN tagging and GVRP supportedIGMP Snooping for multicast filteringPort configuration, status, statistics, monitoring, securitySNTP for synchronizing of clocks over networkSupports PTP Client (Precision Time Protocol) clock synchronizationDHCP Server / Client supportPort Trunk supportMVR (Multicast VLAN Registration) support


Warning / Monitoring System

Relay output for fault event alarmingSyslog server / client to record and view eventsSMTP for event warning notification via emailEvent selection support



Power

Input PowerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Dual Input Universal Supplies120-370VDC or 85-264VAC

Power Consumption (Typ.) 20 Watts Max.




Dimension (W x D x H) 74.3(W)x109.2(D)x153.6(H) mm (2.93 x 4.3 x 6.05 inch)

Weight (g) 1.1 kg

EnvironmentalStorage Temperature -40oC to 85oC (-40oF to 185oF)

Operating Temperature -40oC to 85oC (-40oF to 185oF) NO FANS


iS5com

.com




iES10GF (cont.)Intelligent 10 Port Managed Gigabit Ethernet Switch IEC61850, IEEE1613 Compliant




Shock IEC60068-2-27



Safety EN60950-1



BasePower Supply 1

Power Supply 2

Mount Ethernet Port 1-7(8)

Ethernet Port 8*

Ethernet Port 9 & 10

Description

iES10GF LV LV D 7RJ45&1GRJ45 1GSFP XX

iES10GF | | | | | | Managed core assembly and packaging

XX XX | | | | None

LV LV | | | | Power Supply Input (10-48VDC)

MV MV | | | | Power Supply Input (36-72VDC)

HV HV | | | | Power Supply Input 88-370VDC or 85-264VAC




| | | None

7RJ45&1GRJ45 | |7x10/100Base TX RJ45 and 1x10/100/1000 (TX) RJ45

XX | None

1GSFP |1x100/1000base (X) SFP (Blank no optical transceiver**)

XX None

2GRJ45 2x10/100/1000 Tx RJ45

2GSFP2x100/1000Base (X) SFP (Blank no optical transceiver**)

*DEFAULT PORT TYPE IS GRJ45 PORT 9 & 10 MUST HAVE SAME PORT TYPE Example Order Code: iES10GF-LV-LV-D-7RJ451GRJ45-1GSFP-XX-C1-F3.07Description: 10 Port Gigabit Switch, Dual 10-48VDC Inputs, DIN Mount, 7-10/100Base TX Ports, 1-10/100/1000Base-TX, 1-100/1000Base-X SFP** Ports, Conformal Coating, Firmware version 3.07 C1 – Add for conformal coating FW – Leave blank for latest firmware **SFP’s to be ordered separately.


6.82

[173

.2]

6.07

[154

.1]

6.44 [163.6]

6.44 [163.6]

4.52 [114.8]

0.51 [13.0]

6.57 [166.8]

6.34 [161.1]

8.00

[203

.2]

7.25

[184

.2]

0.59

[15.

0]

1.97 [50.1]

7.09

[180

.2]

7.25

[184

.2]

0.59

[15.

0]

8.00

[203

.2]

2.00 [50.8]

7.09

[180

.2]

4.50 [114.3]

4.00 [101.6]

0.42 [10.7]

0.25 [6.4]

1.05 [26.7]

R0.08 [R2.2]

4.50 [114.3]4.00 [101.6]0.42 [10.7]

0.25 [6.4]

]2.2R[ 80.0R


IEC 61850 SwitchesiES22GFIntelligent 20 Port Managed Gigabit Ethernet Switch IEC 61850 and IEEE1613 Compliant

Features• Designed for power substation / Railway application and fully

compliant with the requirement of IEC 61850-3 and IEEE 1613• Leading EN50155-compliant Ethernet switch for rolling stock

application• Supports iRing (recovery time < 30ms over 250 units) and MSTP(RSTP/

STP compatible) for Ethernet Redundancy• iBridge support other vendors ring technology in an open architecture• iChain allows for multiple redundant network rings• Supports standard IEC 62439-2 MRP (Media Redundancy Protocol)

function• Supports IEEE 1588v2 clock Synchronization• Supports IPV6 new internet protocol version• Supports Modbus TCP protocol• Supports IEEE 802.3az Energy-Efficient Ethernet technology• Provides HTTPS/SSH protocol to enhance network security• Supports SMTP client• Supports IP-based bandwidth management• Supports application-based QoS management• Supports Device Linking security function• Supports DOS/DDOS auto prevention• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic• Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network

Management• Support ACL, TACACS+ and 802.1x User Authentication for security• Supports 9.6K Bytes Jumbo Frame• Multiple notification for warning of unexpected event• Web-based ,Telnet, Console (CLI), and Windows utility (iMSS)

configuration • Support LLDP Protocol• Rigid IP-40 housing design• DIN-Rail and wall mount• Available with Dual High Voltage Universal Power Supplies

IntroductionThe iES22GF is an IEC 61850-3 compliant managed full gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X SFP ports. The switch is designed for power substation applications and rolling stock applications. The iES22GF is also fully compliant with EN50155 requirements. Complete support of the Ethernet Redundancy protocol, iRing (recovery time < 30ms over 250 units) and is MSTP/RSTP/STP compatible. The switch is designed to protect mission-critical applications from network interruptions and/or temporary malfunctions. The iES22GF can be managed centrally using the iManaged Software Suite, a Web-based interface, Telnet and console (CLI) configuration. This switch is one of the most reliable choices for power substation and rolling stock applications.

• iRing: is a redundant ring technology with recovery times of less than 30ms with up to 250 nodes. The iRing redundant ring technology protects mission-critical applications from network interruptions and/or temporary malfunctions with its fast recover technology.

• iBridge: is an enhanced redundant technology that makes iS5Com switches compatible with other vendors proprietary redundant ring technologies. It allows for a single ring when formed with other vendor products.

• iChain: is a revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network. iChain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger, more robust compound network topology. iChain provides ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost-effectiveness.

• MRP: Media Redundancy Protocol (MRP) meets the IEC 62439-2 protocol standard. It allows rings of Ethernet switches to overcome any single failure with recovery times much faster than achievable using the Spanning Tree Protocol.

• IP-based Bandwidth Management: The switch provides an advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth.

• Application-Based QoS: The switch also supports application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number.

• Device Link Function: This function prevents unauthorized access to the network by only allowing permitted IP addresses that have a MAC address to access the network.

• Advanced DOS/DDOS Auto Prevention: The switch also provides an advanced hardware based DOS/DDOS auto prevention. If there is a sudden surge in IP flow, the switch locks the source IP address temporarily and hence preventing network failure.


• Modbus TCP: This is a Modbus variant used for communications over TCP/IP networks.

• IEEE 802.3az Energy-Efficient Ethernet: This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking standards, which allow for less power consumption during periods of low data activity.

SpecificationsModel Number iES22GFPhysical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8

100/1000Base-X with SFP port Up to 12

Technology

Ethernet Standards

IEEE 802.3 for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3ab for 1000Base-TIEEE 802.z for 1000Base-XIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol )IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table 8k

Priority Queues 4


Switch Properties

Switching latency: 7 usSwitching bandwidth: 40GbpsMax. Number of Available VLANs: 256IGMP multicast groups: 128 for each VLANPort rate limiting: User DefineHttps / SSH enhance network security


iS5com

.com




iES22GF (cont.)Intelligent 20 Port Managed Gigabit Ethernet Switch IEC 61850 and IEEE1613 Compliant

Security Features

Device Binding security featureEnable/disable ports, MAC based port securityPort based network access control (802.1x)VLAN (802.1Q ) to segregate and secure network trafficRadius centralized password managementSNMPv3 encrypted authentication and access securityHttps / SSH enhance network security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)Redundant Ring (iRing) with recovery time less than 30ms over 250 units TOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN tagging and GVRP supportedIGMP SnoopingIP-based bandwidth managementApplication-based QoS managementDOS/DDOS auto preventionPort configuration, status, statistics, monitoring, securityDHCP Server/Client/RelaySMTP ClientModbus TCP

Network Redundancy

iRing iBridgeiChainMRPMSTP (RSTP/STP compatible)



Power

Redundant Input Power Dual DC inputs 10-48VDC, Dual DC 36-72VDC, and Dual AC/DC power inputs. 85-264VAC / 88-370VDC.



Reverse Polarity Protection Present


Dimension (W x D x H) 5 x 6.44 x 6.07 inch




Regulatory ApprovalsPower Automation Compliancy IEC 61850-3, IEEE 1613



Shock IEC60068-2-27



Safety EN60950-1



Supply 1Power Supply 2 Mount Ethernet


Ethernet Port 12-16

Ethernet Port 17-20

Description

iES22GF HV LV D 8GRJ45 4GSFP 4GSFP XX

iES22GF | | | | | | | Core assembly and packaging

LV LV | | | | | Power Supply Input (10-48VDC)

MV MV | | | | | Power Supply input (36-72VDC)

HV HV | | | | |Power Supply Input 88-370VDC or 85-264VAC

D | | | | DIN Rail Mounting

P | | | | Panel Mounting

N | | | | No Mounting Hardware

8GRJ45 | | |8 X 10/100/1000Base TX RJ45

XX XX XX XX None

4GSFP 4GSFP 4GSFP4 x 100/1000 BASE (X) SFP (Blank no SFP transceiver**)

SFP** SEE ACCESSORIES FOR SFP TRANSCEIVER PRICING

Example Order Code: iES22GF-HV-LV-D-8GRJ45-4GSFP-4GSFP-XX-C1-F3.07 Description: 20 Port Gigabit Switch, Power Supply 1 Input 88-370VDC or 85-264VAC, Power Supply 2 input 36-72VDC, DIN Rail Mount, 8x10/100/1000Base TX Ports, 4x100/1000Base (X) SFP, 4x100/1000Base (X) SFP ports, Conformal Coating, Firmware version 3.07 C1 – Add for conformal coating, FW – Leave blank for latest firmware **SFP’s to be ordered separately.




IEC 61850 SwitchesiES28GFIntelligent 28 Port Configurable Gigabit Switch IEC 61850, IEEE 1613 and EN50155

Features• Supports iRing (recovery time < 30ms up to 250 units in one ring)• Supports STP, RSTP and MSTP• Supports Layer 3 routing, RIP and static routing function• Support IEEE 1588v2 PTP clock synchronization• IPv6 support• VLAN Priority: Supports priority-tagged frames to be received by

specific IEDs• MRP Media Redundancy Protocol as per IEC62439-2• Supports HTTPS/SSH protocol enhanced network security• Supports SMTP clock client• IP-based bandwidth management• Application-based QoS management• Device Linking security function• DOS/DDOS auto threat prevention• IGMP v2/v3 (IGMP snooping support)• SNMP v1/v2c/v3 & RMON and 802.1Q VLAN Network Management• Support ACL, TACACS+ and 802.1x User Authentication• Supports 9.6K Bytes Jumbo Frame• Multiple alarm notification methods• Administration by Web-browser ,Telnet, Console (CLI), and iManage

Software Suite configuration• LLDP (Link Layer Discovery Protocol)• 19 inch rack mount design

IntroductioniES28GF is a highly redundant and scalable Layer-2 managed Gigabit Ethernet switch with 4 modular slots. Designed to withstand the harshest environments of Transmission and Distribution substations and rolling stock applications. The iES28GF is fully compliant with industry standards such as IEC 61850, IEEE 1613, and EN50155, with an operating temperature from -40 to +85 degrees C and redundancy support through functions like iRing and STP/RSTP/MSTP assuring protection of all mission critical network applications.

iES28GF can also be managed conveniently via the iManage Software Suite, Telnet, and console (CLI) configuration.

• P-based Bandwidth Management: The switch provides advanced IP-based bandwidth management limiting maximum bandwidth for each IP device. Users can configure an IP camera and NVR with dedicated bandwidth and limit the bandwidth of other devices.

• Application-Based QoS: The switch also supports application-based QoS. Application-based QoS can be set with the highest priority for data streaming according to TCP/UDP port number.

• Device Link Function: The special Device Link function permits only allowed IP addresses with a MAC address to access the network preventing unauthorized access to the network .

• Advanced DOS/DDOS Auto Prevention: Switch provides advance DOS/DDOS auto prevention. – This is a hardware based prevention. If there is a sudden surge in IP flow, the switch locks the source IP address temporarily and hence prevents network failure.


SpecificationsModel Number iES28GFPhysical Ports

Slot Number 3 x 10/100/1000 Base (X) modules and 1 x 1000 Base (x) module

Technology

Ethernet Standards

IEEE 802.3 for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3ab for 1000Base-TIEEE 802.z for 1000Base-XIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol )IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table 8k

Priority Queues 8


Switch PropertiesSwitching latency: 7 usMax. Number of Available VLANs: 256IGMP multicast groups: 128 for each VLANPort rate limiting: User Defined


Security Features

Device Linking security feature.Enable/disable ports, MAC based port securityPort based network access control (802.1x)Single 802.1x and Multiple 802.1xMAC-based authentication, QoS assignmentGuest VLAN, MAC address limit, TACACS+VLAN (802.1Q ) to segregate and secure network trafficRadius centralized password managementSNMPv3 encrypted authentication and access securityWeb and CLI authentication and authorizationAuthorization (15 levels) via TACACS+IP source guard

Software Features

Hardware routing, RIP and static routingIEEE 1588v2 PTP clock synchronizationIEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)Multiple Registration Protocol (MRP)Multiple VLAN Registration Protocol (MVRP), MSTP (RSTP/STP compatible)Redundant Ring (iRing) with recovery time less than 30ms over 250 unitsTOS/Diffserv supported, Quality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN tagging and GVRP supportedVoice VLAN, IGMP v2/v3 SnoopingIP-based bandwidth management, Application-based QoS managementDOS/DDOS auto prevention, Port configuration, status, statistics, monitoring, securityDHCP Server/Client/snooping, DHCP Relay, Modbus TCP, DNS client proxyARP inspection, SMTP Client

Network RedundancyiRingiBridgeMRP (Media Redundancy Protocol as per IEC62439-2)MSTP (RSTP/STP compatible)

RS-232 Serial Console Port RS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1

iS5com

.com




iES28GF (cont.)Intelligent 28 Port Configurable Gigabit Switch IEC 61850, IEEE 1613 and EN50155 Specifications (cont.) Select Port Configuration for Slots 1 to 3Fault ContactRelay Relay output capacity of 1A at 24VDC

Power

Redundant power inputDual 24VDC power inputs at terminal block

Dual 48VDC (36-72VDC) power inputs at terminal block

Dual 110/220VDC/AC (88~264VAC / 100~370VDC) power inputs at terminal block

Overload current protection Present Present Present

Physical CharacteristicEnclosure 19 inches rack mountable




Regulatory ApprovalsPower Automation IEC 61850-3, IEEE 1613 Compliant


EMSEN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT),EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11



BasePower Supply 1

Power Supply 2

MountSlot 1 (Ports 1-8)

Slot 2 (Ports 9-16)

Slot 3 (Ports 17-24)

Slot 4 (Ports 25-28)

Description

iES28GF LV HV RR 8GRJ45 8GRJ45 8GRJ45 4GSST70

iES28GF | | | | | | | Core assembly and packaging

XX XX | | | | | NoneLV LV | | | | | 24VDC (18-36VDC)MV MV | | | | | 48 VDC (36-72VDC)HV HV | | | | | 88-300VDC or 85-264VAC

RF | | | |19" Rack Mount - Power Terminal in the Front (same side as Ethernet ports)

RR | | | | 19" Rack Mount - Power Terminal in the Rear

P | | | | Panel MountingN | | | | No Mounting Hardware

SFP** SEE ACCESSORIES FOR SFP TRANSCEIVER PRICING


iS5Com # Slots 1 - 3 Description

XX None

8GRJ45 8 X 10/100/1000Base TX RJ45

8GSFP 8 X 100/1000Base (X) SFP (Blank no SFP transceivers**)

2MMSC2 2 x 100FX Multimode SC, 2Km, 1310nm

4MMSC2 4 x 100FX Multimode SC, 2Km, 1310nm

2MMST2 2 x 100FX Multimode ST, 2Km, 1310nm

4MMST2 4 x 100FX Multimode ST, 2Km, 1310nm

2SMSC15 2 x 100FX Singlemode SC, 15Km, 1310nm


2SMST15 2 x 100FX Singlemode ST, 15Km, 1310nm


















Select Port Configuration for Slot 4iS5Com # Slot 4 Description

XX None

2GRJ45 2 X 1000Base TX RJ45

4GRJ45 4 x 1000Base TX RJ45

2GSFP 2 X 1000Base (X) SFP (Blank no SFP transceivers**)

4GSFP 4 x 1000Base X SFP (Blank no SFP transceivers**)

2GMSC 2 x 1000SX Multimode SC, 550m, 850nm

4GMSC 4 x 1000SX Multimode SC, 550m, 850nm

2GMST 2 x 1000SX Multimode ST, 550m, 850nm

4GMST 4 x 1000SX Multimode ST, 550m, 850nm

2GSSC10 2 x 1000LX Singlemode SC, 10Km, 1310nm


2GSST10 2 x 1000LX Singlemode ST, 10Km, 1310nm









4GSST70 4 x 1000LX Singlemode ST, 70Km, 1550nm Example Order Code: iES28GF-LV-HV-RR-8GRJ45-8GRJ45-8GRJ45-4GSST70 Description: 28 Port Gigabit Switch, Power Supply 1 input 36-72VDC, Power Supply 2 Input 88-370VDC or 85-264VAC, All terminals at the rear, 8x10/100/1000 TX, 8x10/100/1000 TX, 8x10/100/1000 TX, 4x1000 Singlemode ST, 70Km optics. C1 – Add for conformal coating, FW – Leave blank for latest firmware


HSR/PRP SwitchesiRBXIntelligent 6 Port Redundancy Ethernet Box

Features• Modular design, up to 6 ports of 10/100/1000Base-TX or

100/1000Base-X • Managed 6 ports Gigabit Ethernet Switch• Fully compliant with IEC 62439-3 HSR “High-availability Seamless

Redundancy”• Fully compliant with IEC 62439-3 PRP “Parallel Redundancy Protocol”• Supports two HSR/PRP RedBoxes or single QuadBox configurations• Supports IEEE 1588v2 one-step transparent, boundary and ordinary

clocks• Provides redundancy with no single point of failure• Zero time to recovery in case of failure• Single network faults in the ring result in zero frame loss• Network remains fully operational during maintenance• Any device can be disconnected and replaced without breaking

network connectivity• Redundancy is supervised continuously for network and device

management• Operates independently of specific Ethernet protocols• Suitable for any application that requires short reaction time and high

availability such as substation automation, high-speed drives and transportation

• Supports Dual redundant hot swappable power supplies

IntroductionThe iRBX switch provides redundant ports for critical and high-availability networks. It supports both high-availability seamless redundancy (HSR, IEC 62439-3 Clause 5) and parallel redundancy protocol (PRP, IEC 62439-3 Clause 4).

Both of these standards provide redundant paths with no single point of failure and zero time to recover in case of failure. Single network faults in the ring will not result in any frame loss. The network is fully operational during maintenance and any device can be disconnected and replaced without breaking network connectivity. HSR is typically used in a ring topology as shown in figure 1. PRP is typically used in a double star topology as shown in figure 2.

SpecificationsModel Number iRBXPhysical PortsPort Types 6 ports 10/100/1000 Base-Tx or 100/1000Base-X, SFPs

Technology

Ethernet Standards

IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-TIEEE 802.z for 1000Base-XIEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 1588v2 one-step transparent, boundary and ordinary clocksIEC 62439-3 HSR “High-availability Seamless Redundancy”IEC 62439-3 PRP “Parallel Redundancy Protocol”

Priority Queues 4

Time Synchronization Supports IEEE 1588v2 transparent, boundary and ordinary clock

Network RedundancyHSR, PRP as per IEC 62439-3, MRP - Media Redundancy Protocol as per IEC 62439-2.RSTP - Rapid Spanning Tree Protocol

Software Features

IEEE 1588v2 PTP clock synchronization, IEC 62439-3 HSR “High-availability Seamless Redundancy”IEC 62439-3 PRP “Parallel Redundancy Protocol”IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static) Multiple Registration Protocol (MRP)MSTP (RSTP/STP compatible), Quality of Service (802.1p) for real-time traffic, IGMP SnoopingIEEE 802.1Q VLAN support - 4095 simultaneous VLANsMulticast filtering - 16 MAC entries per input port, every entry has configurable maskIGMP multicast groups: 128 for each VLAN

iS5com

.com

Figure 1 - HSR Ring Topology

Figure 2 - PRP Double Star Topology




Specifications (cont.)Power

Redundant power input modular

Dual 24VDC power inputs at terminal block


Dual 110/220VDC/AC (88~300VDC / 85~264VAC)power inputs at terminal block


Physical CharacteristicEnclosure 19 inches rack mountable


Operating Temperature -40 to 85ºC (-40 to 185ºF )








BasePower Supply 1

Power Supply 2

Mount Slot 1* Slot 2* Description

iRBX LV LV R 3GSFP** 3GSFP**

iRBX | | | | | Core assembly and packaging

XX XX | | | None

LV LV | | | 24VDC (18-36VDC)

MV MV | | | 48 VDC (36-72VDC)

HV HV | | | 88-300VDC or 85-264VAC

RF | |19” Rack Mount - Power terminal in the Front (same side as Ethernet ports)

RR | | 19” Rack Mount - Rear Mount Power Terminal connection



XX XX None

3GSFP** 3GSFP** 2 x 100/1000Base T(X) SFP + 1 x 10/100/1000Base T(X) SFP

Blank module

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONS Example order code: iRBX-MV-LV-P-3GSFP**-C1Description: 6 Port Redundancy Ethernet Box, Single Output Power Supply 1: 48 VDC (36-72VDC), Single Output Power Supply 2: 24 VDC (18-36VDC), Panel Mounting, 2x100/1000Base T(X) SFP + 1x10/100/1000Base T(X) SFP, Conformal Coating, Firmware versionC1=Add for conformal coating, FW – Leave blank for latest firmwareNote: Slot 1* - Ports 1 & 2 are HSR/PRP Port Slot 2* - Port 3 is Interlink Port

iRBX (cont.)Intelligent 6 Port Redundancy Ethernet Box


HSR/PRP SwitchesiRBX6GFIntelligent 6 Port HSR/PRP Ethernet Switch IEC 61850 and IEEE 1613 Compliant

Features• Managed Six ports Gigabit Ethernet Switch • Fully compliant with IEC 62439-3 HSR “High-availability Seamless

Redundancy”• 4 ports 100/1000 Base-X and 2 ports of (10/100/1000 Base-TX or

100/1000Base-X)• Wi-Fi IEEE 802.11 B/G/N management port• Fully compliant with IEC 62439-3 PRP “Parallel Redundancy Protocol”• Supports two HSR/PRP RedBoxes or single QuadBox configurations• Supports IEEE 1588v2 one-step transparent, boundary and ordinary

clocks• Provides PPS and IRIG-B Outputs• Provides redundancy with no single point of failure• Zero time to recovery in case of failure• Single network faults in the ring result in zero frame loss• Network remains fully operational during maintenance• Any device can be disconnected and replaced without breaking

network connectivity• Redundancy is supervised continuously for network and device

management• DIN Rail or Wall mount option• Rigid IP-40 Galvanized metal housing• Available with Dual Power Supplies

IntroductionThe iRBX-D switch provides redundant ports for critical and high-availability networks. It supports both high-availability seamless redundancy (HSR, IEC 62439-3 Clause 5) and parallel redundancy protocol (PRP, IEC 62439-3 Clause 4).

Both of these standards provide redundant paths with no single point of failure and zero time to recover in case of failure. Single network faults in the ring will not result in any frame loss. The network is fully operational during maintenance and any device can be disconnected and replaced without breaking network connectivity.

Specifications

Model Number iRBX6GFPhysical Ports

Port Types4 ports 100/1000 Base-X and 2 ports of (10/100/1000 Base-Tx or 100/1000Base-X)BNC Provides PPS and IRIG-B Outputs

Technology

Ethernet Standards

IEEE 802.3 for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-TIEEE 802.z for 1000Base-XIEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 1588v2 one-step transparent , boundary and ordinary clocksIEC 62439-3 HSR “High-availability Seamless Redundancy”IEC 62439-3 PRP “Parallel Redundancy Protocol”

Priority Queues 4

Time Synchronization Supports IEEE 1588v2 transparent, boundary and ordinary clock

Network RedundancyHSR, PRP as per IEC62439-3MRP - Media Redundancy Protocol as per IEC62439-2.RSTP - Rapid Spanning Tree Protocol

Software Features

IEEE 1588v2 PTP clock synchronizationIEC 62439-3 HSR “High-availability Seamless Redundancy”IEC 62439-3 PRP “Parallel Redundancy Protocol”Multiple Registration Protocol (MRP)MSTP (RSTP/STP compatible)Quality of Service (802.1p) for real-time trafficIGMP SnoopingIEEE 802.1Q VLAN support - 4095 simultaneous VLANsMulticast filtering -16 MAC entries per input port, every entry has configurable maskIGMP multicast groups: 128 for each VLAN






Base Power Supply 1

Power Supply 2 Mount

Port 1, 2, 4, 5 (HSR/PRP)

Ethernet Port 3 and 6

Description

iRBX6GF HV XX D XX 2GMMSCiRBX6GF | | | | | Core assembly and packaging

XX XX | | | NoneLV LV | | | 24VDC (18-36VDC)MV MV | | | 48 VDC (36-72VDC)HV HV | | | 88-300VDC or 85-264VAC

D | | DIN MountP | | Panel MountingN | | No Mounting Hardware

XX | None

4GSFP | 4 x 100/1000Base (X) SFP (Blank no SFP transceiver**)

4MMSC | 4 x 100FX Multimode SC, 1310nm, 2Km4MMST | 4 x 100FX Multimode ST, 1310nm, 2Km

4SSC15 | 4 x 100FX Singlemode SC, 1310nm, 15km

4SST15 | 4 x 100FX Singlemode ST, 1310nm, 15km








Base Power Supply 1




Description

iS5com

.com




Ordering Information (cont.)

iRBX6GF (cont.)Intelligent 6 Port HSR/PRP Ethernet Switch IEC 61850 and IEEE 1613 Compliant

4SST100 | 4 x 100FX Singlemode SC, 1550nm, 100km

4GMMSC | 4 x 1000 SX Multimode ST, 850nm, 550m

4GMMST | 4 x 1000 SX Multimode SC, 850nm, 550m

4GSST10 | 4 x 1000 LX Singlemode ST, 1310nm, 10km

4GSSC10 | 4 x 1000 LX Singlemode SC, 1310nm, 10km





XX None

2GCX 2 x Combo*** (10/100/1000BaseTX RJ45 and 100/1000Base (X) SFP(blank** )

2GSFP 2 x 100/1000Base (X) SFP (Blank no SFP transceiver**)

2MMSC 2 x 100FX Multimode SC, 1310nm, 2Km2MMST 2 x 100FX Multimode ST, 1310nm, 2Km

2SSC15 2 x 100FX Singlemode SC, 1310nm, 15km

2SST15 2 x 100FX Singlemode ST, 1310nm, 15km



Base Power Supply 1




Description







2GMMSC 2 x 1000 SX Multimode SC, 850nm, 550m

2GMMST 2 x 1000 SX Multimode ST, 850nm, 550m

2GSST10 2 x 1000 LX Singlemode ST, 1310nm, 10km

2GSSC10 2 x 1000 LX Singlemode SC, 1310nm, 10km





Example Order Code: iRBX6GF-HV-XX-D-XX-2GMMSCDescription: Intelligent 6 Port HSR/PRP Ethernet Switch, Power Supply 1: 88-300VDC, or 85-264VAC, Power Supply 2: None, DIN Mount, XX, 2 x 1000 Base SX Multimode SC PortsSFP** SFP’s to be ordered seperately



PoE SwitchesiES12GPIntelligent 12 Port Managed Gigabit PoE Ethernet Switch

Features• 12 port switch with 8x10/100/1000base-T(X) PoE, IEEE 802.3 at

compliance, providing up to 30 Watts per port• Jumbo frame up to 9K Bytes• Rapid Network Recovery: iRing (recovery time < 30ms over 250 units

of connection),• MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy• IPv6 support• Supports SMTP client• Supports IP-based bandwidth management• Supports application-based QoS management• Device Linking security function• DOS/DDOS auto prevention• PoE scheduled configuration and PoE auto-ping check function• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic• SNMP v1/v2c/v3 support for network management• RMON and 802.1Q VLAN network management• Supports ACL, 802.1x User Authentication for security• Multiple notifications for warning of unexpected events• iManage Software Suite supports centralized management and is

configurable via a Web-browser, Telnet, and Console(CLI)• LLDP (Link Layer Discovery Protocol)• IP-40 Galvanized Steel Housing• DIN-Rail and wall mount

IntroductionThe iES12GP is a Managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-TX ports that supports the PoE function and 4x1000Base-X SFP optional ports. With Ethernet Redundancy protocols such as iRing (recovery time < 30ms up to 250 Ethernet switches), and MSTP/RSTP/STP (IEEE 802.1s/w/D), the iES12GP protects your mission-critical applications from network interruptions or temporary malfunctions and restores connectivity with its fast network recovery technology. The unique Modular-Ring technology provides a means to complement and inter-operate with most third party proprietary ring technologies.

The iES12GP is backed by a fanless, IP-40 galvanized steel enclosure and a wide operating temperature range from -40 to +85ºC to suit the most demanding of environments. This switch provides an advanced IP-based bandwidth management which limits the maximum bandwidth for each IP devices. Users can configure an IP camera and NVR with the required bandwidth and limit the bandwidth for other decoders. The iES12GP switch supports application-based QoS. Application-based QoS can set the highest priority for data streaming according to the TCP/UDP port number. iS5Com’s switches special Device Linking function can permit only allowed IP addresses with a MAC address to access the network. Intruders will not be able to access the IP surveillance network without permission. Our switches also provided advanced DOS/DDOS auto prevention. If any IP flow gets too large in short period of time, the switch will lock the source IP address out for certain amount of time to prevent an attack. This hardware based prevention can prevent DOS/DDOS attacks in real-time. The iES12GP supports Power over Ethernet (PoE) to transmit electrical power, along with data to remote devices over a standard twisted-pair cable. Each iES12GP switch has 8x10/100/1000Base-T(X) PoE ports. All functions of the iES12GP can be managed centrally and conveniently by our powerful windows utility called the iManage Software Suite. Therefore, this switch is one of the most reliable choices for highly-managed Gigabit Fiber Ethernet applications.

iManage Software Suite

PoE Pin Definition 10/100Base-T(X) P.S.E. RJ-45 Port 1000Base-T P.S.E. RJ-45 PortRJ-45 Pin Definition RJ-45 Pin Definition

Pin No. Description Pin No. Description

#1 TD+ with PoE Power input + #1 BI_DA+ with PoE Power input +

#2 TD- with PoE Power input + #2 BI_DA- with PoE Power input +

#3 RD+ with PoE Power input - #3 BI_DB+ with PoE Power input -

#4 BI_DC+

#5 BI_DC-

#6 RD- with PoE Power input - #6 BI_DB- with PoE Power input -

#7 BI_DD+

#8 BI_DD-

SpecificationsModel Number iES12GPPhysical Ports10/100/1000Base-T(X) with P.S.E. ports in RJ45 Auto MDI/MDIX

8

1000Base-X SFP Port 4

Technology

Ethernet Standards

IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TXIEEE 802.3z for 1000Base-XIEEE 802.3ab for 1000Base-TIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol)IEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)


Priority Queues 4

iS5com

.com



Fiber Network Connection





Switch Properties

Switching latency: 7 usSwitching bandwidth: 24GbpsMax. Number of Available VLANs: 256IGMP multicast groups: 128 for each VLANPort rate limiting: User Define

Jumbo Frame Up to 9K Bytes

Security Features

Device Linking security featureEnable/disable ports, MAC based port securityPort based network access control (802.1x)VLAN (802.1Q ) to segregate and secure network trafficRadius centralized password managementSNMPv3 encrypted authentication and access securityHttps / SSH enhance network security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)Redundant Ring (iRing) with recovery time less than 30ms over 250 units TOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN tagging and GVRP supportedIGMP SnoopingIP-based bandwidth managementApplication-based QoS managementDOS/DDOS auto preventionPort configuration, status, statistics, monitoring, securityDHCP Client/ServerSMTP Client

Network RedundancyiRing Fast Recovery ModeSTP / RSTPMSTP


LED IndicatorsPower indicator Green : Power LED x 3

R.M. indicator Green : indicate system operated in iRingMaster Mode

Ring indicator Green : indicate system operated in iRing Mode

Fault indicator Amber : Indicate unexpected event occurred

10/100/1000Base-T(X) RJ45 port indicator Green for port Link/Act.

PoE indicator Green for PoE enable indicator

1000Base-X Fiber port indicator Green for port Link/Act.


PowerRedundant Input power Dual DC inputs. 50~57VDC on 6-pin terminal block

Power consumption (Typ.) 20Watts (power device not included)


Reverse polarity protection Not Present


Dimension (W x D x H) 96.4 (W) x 108.5 (D) x 154 (H) mm (3.8 x 4.2.7 x 6.06 inch)

Weight (g) 1400g






Shock IEC60068-2-27



Safety EN60950-1





Description

iES12GP MV D 8GRJ45 4GSFP**

iES12GP | | | | Core assembly and packaging





| XX None

8GRJ45 XX 8 X 10/100/1000Base-TX RJ45

4GSFP** 4 x 1000 BASE (X) SFP (Blank no SFP transceiver)

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONSExample Order Code: iES12GP-MV-D-8GRJ45-4GSFP**-C1-F3.07Description: 12 Port Gigabit PoE Switch, Dual Input 50-57VDC, DIN Rail Mount, 8x10/100/1000Base-T(X) PoE Ports, 4x1000Base-X SFP Ports, Conformal Coating, Firmware version 3.07 C1=Add for conformal coating, FW – Leave blank for latest firmware

iES12GP (cont.)Intelligent 12 Port Managed Gigabit PoE Ethernet Switch







PoE SwitchesiES28GPIntelligent 28 Port Managed Gigabit PoE Ethernet SwitchFeatures• Supports 24x10/100/1000Base-T(X) P.S.E. fully compliant with

IEEE802.3at standard, provides up to 30 Watts per port and 4x1000Base-X SFP ports

• Supports up to 9K Bytes Jumbo frame• iRing (recovery time < 30ms over 250 units of connection), MSTP/

RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy • Supports IPV6 new internet protocol version• Provides HTTPS/SSH protocol to enhance network security• Supports SMTP client• Supports IP-based bandwidth management• Supports application-based QoS management• Supports Device Linking security function• Supports DOS/DDOS auto prevention• Supports PoE scheduled configuration and PoE auto-ping check

function• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic• Supports SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network

Management• Support ACL, 802.1x User Authentication for security• Multiple notifications for warning of unexpected events• Web-based, Telnet, Console (CLI), and Windows utility (iManage

Software Suite) configuration.• Support for LLDP Protocol• Event notification through Syslog, Email, SNMP trap, and Relay Output• 19 inches rack mountable

IntroductionThe iES28GP is a managed Ethernet switch with Ethernet Redundancy protocols such as iRing (recovery time <30ms with up to 250 Ethernet switches), and MSTP/RSTP/STP (IEEE 802.1s/w/D). The iES28GP can protect your mission-critical applications from network interruptions or temporary malfunctions to restore connectivity using its fast recovery technology. This iS5Com switch provides advanced IP-based bandwidth management, which can limit the maximum bandwidth of each IP device. Users can configure an IP camera and NVR with more bandwidth and limit the bandwidth of other devices. The iES28GP switch supports application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. The special Device Linking function allows only specific IP addresses with a MAC address to access the networking. The iES28GP switch also provides for advanced DOS/DDOS auto prevention. If an IP flow gets too big in a short period of time, the switch locks the source IP address for a certain amount of time to prevent the attack. The switch can be managed centrally using the iManage Software Suite, as well as with a Web-based interface, Telnet and console (CLI) configuration. Each iES28GP series switch has 24X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. The product is made from galvanized steel and has a wide operating temperature from -40°C to +85°C suitable for the harshest of environments without the use of fans.


PoE Pin Definition10/100Base-T(X) P.S.E. RJ-45 Port 1000Base-T P.S.E. RJ-45 PortRJ-45 Pin Definition RJ-45 Pin Definition

Pin No. Description Pin No. Description

#1 TD+ with PoE Power input + #1 BI_DA+ with PoE Power input +

#2 TD- with PoE Power input + #2 BI_DA- with PoE Power input +

#3 RD+ with PoE Power input - #3 BI_DB+ with PoE Power input -

#4 BI_DC+

#5 BI_DC-

#6 RD- with PoE Power input - #6 BI_DB- with PoE Power input -

#7 BI_DD+

#8 BI_DDSpecifications

SpecificationsModel Number iES28GPPhysical Ports10/100/1000 Base-T(X) Ports in RJ45Auto MDI/MDIX with P.S.E.

24 Max.

1000Base-X SFP Port 4 Max.

Technology

Ethernet Standards

IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TXIEEE 802.3ab for 1000Base-TIEEE 802.z for 1000Base-XIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)IEEE802.3at PoE Specification (up to 30 Watts per port for P.S.E.)

MAC Table 8k

Priority Queues 4


Switch Properties

Switching latency: 7 µsSwitching bandwidth: 56GbpsMax. Number of Available VLANs: 256IGMP multicast groups: 128 for each VLANPort rate limiting: User Define

Jumbo frame Up to 9K Bytes

Security Features


Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)Redundant Ring (iRing) with recovery time less than 30ms over 250 units TOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN tagging and GVRP supportedIGMP SnoopingIP-based bandwidth managementApplication-based QoS managementDOS/DDOS auto preventionPort configuration, status, statistics, monitoring, securityDHCP Client/ServerSMTP Client

Network Redundancy

iRing Fast Recovery ModeSTPRSTPMSTP

RS-232 Serial Console Port RS-232 in DB9 connector with console cable. 115200bps, 8, N, 1Monitoring and Configuration interface

Topology View

iS5com

.com



LED IndicatorsPower Indicator (PWR) Green : Power indicator for AC | Green : Power indicator for DC

Power-1 Indicator (PW1) Green : Indicate Power-1 input

System Ready Indicator (STA) Green : Indicates that the system is ready. Blinking while the system upgrades firmware


iRing Indicator (Ring) Green : Indicates system is operating in iRing mode Blinking indicates the Ring is broken.

Fault Indicator (Fault) Amber : Indicates unexpected event occurred

System Running Indicator (RUN) Green : System operated continuously

Supervisor Login Indicator (RMT) Green : System is accessed remotely

Reset To Default Running Indicator (DEF) Green : System reset to default configuration

Ping Command To The Switch Indicator (Ping) Green : System is processing “PING” request

PoE indicator Green for P. S.E. power output indicator

10/100/1000Base-T(X) RJ45 Port Indicator

Left LED - Green for 1000Mbps, and Amber for 10/100Mbps, Right LED - Amber for full-duplex

1000Base-X SFP Port Indicator Green for port Link/Act.

Fault ContactRelay Relay output capacity of 1A at 24VDC

Power

Input Power Requirements Terminal Block, 50 VDC (50-58 VDC), 1000 Watts Terminal Block, 120-240 VAC

Internal Power Supply None Included

Power Consumption 36 Watts (typical with no P.S.E.), 756 Watts Max (36W for switch and 30W by 24 ports P.S.E.)


Physical CharacteristicEnclosure IP 40 Galvanized Steel Housing

Dimension (W x D x H) 443 (W) x 342 (D) x 44 (H) mm (17.46 x 13.46 x 1.73 inch)

Weight (g) 4250g






Shock IEC60068-2-27





BasePower Supply 1

Power Supply 2

Mount Ethernet Port 1-8

Ethernet Port 9-16

Ethernet Port 17-24

Ethernet Port 25-26

Ethernet Port 27-28

Description

iES28GP HV XX R 8GRJ45 8GRJ45 8GRJ45 2GSFP** 2GSFP**

iES28GP | | | | | | | | Core assembly and packaging

| XX | | | | | | None

PV | | | | | | | 50 VDC (50-58 VDC)

HV | | | | | | | 100-240 VAC

R | | | | | 19" Rack Mount



XX XX XX | | None

8GRJ45 8GRJ45 8GRJ45 | |8 X 10/100/1000 Base-TX P.S.E RJ45

XX XX None

2GSFP** 2GSFP**2 X 1000Base (X) SFP (Blank, no transceivers)

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONSExample Order Code: iES28GP-HV-XX-R-8GRJ45-8GRJ45-8GRJ45-2GSFP**-2GSFP**-C1-F3.07 Description: 28 Port Gigabit Switch, Single Input Power Supply 1: 100-240VAC, Single Input Power Supply 2: None, Rack Mount, 8x10/100/1000Base-T(X) P.S.E. Ports, 8x10/100/1000Base-T(X) P.S.E. Ports, 8x10/100/1000Base-T(X) P.S.E. Ports, 2x100/1000Base-(X) SFP**, 2x100/1000Base (X) SFP**, Conformal Coating, Firmware version 3.07 C1=Add for conformal coating, FW – Leave blank for latest firmware








Ethernet SwitchesiES6Intelligent 6 Port Ethernet Switch

iS5com

.com

iES6-2xSC iES6-2xST iES6-2RJ45

Features• Supports iRing (recovery time < 30ms over 250 units of connection)• iBridge supports other vendor’s ring technology in an open architecture• iChain supports multiple redundant ring technologies• Supports RSTP/STP • Provides Fast recovery technology for Ethernet multi-redundancy• SNMP v1/v2c/v3 ,http server, telnet server support• Supports LLDP protocol• Configurable by iManage Software Suite (iMSS) a Web-based Windows

utility• Event notification through Syslog, Email, and SNMP trap• Support for 6 x 10/100Base TX RJ45 ports, or 4 x 10/100Base TX RJ45

ports and 2 x 100Base-FX fiber ports• Dual Redundant Power Supplies 10-48VDC, or Single input universal

supply 88-370VDC or 85-264VAC with a single 10-48VDC Backup• Rigid IP-40 housing design• DIN-Rail and wall mountable

IntroductionThe iES6 Intelligent Managed Ethernet switch that supports the Ethernet Redundancy protocol with featues like iRing (recovery time < 30ms over 250 units of connection), iBridge, iChain, and STP/RSTP (IEEE802.1w/D). These features combined with a wide operating temperature of -40°C to 85°C, and dual redundant power supplies, help protect mission-critical applications from network interruptions or temporary malfunctions. The iES6 can be managed centralized and convenient by our powerful windows utility,”iMSS”.

SpecificationsModel Number iES6Physical Ports10/100Base-T(X) RJ45 Ports Auto MDI/MDIX 4 4 4

10/100Base-T(X) RJ45 Ports Auto MDI/MDIX 2



Fiber Mode Multi-mode Single-mode


Fiber Optical Connector SC or ST SC or ST

Typical Distance (Km) Various Various







Technology

Ethernet Standards

IEEE 802.3 for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow controlIEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)


Priority Queues 4


Switch Properties Switching bandwidth : 1.2Gbps VLAN : Port Based

Security Features Enable/disable portsVLAN to segregate and secure network traffic

Software Features

STP/RSTP (IEEE 802.1D/w)Redundant Ring (iRing) with recovery time less than 30ms over 250 units DHCP ClientPort base VLANLLDP (Link Layer Discovery Protocol)Port configuration, status, statistics, monitoring, security SNMP v1/v2c/v3 and private MIB support

Network Redundancy iRing, iBridge, iChain, Fast recovery STP/RSTP

Fault contactRelay Relay output to carry capacity of 1A at 24VDC

Power

Redundant Input Power Dual DC inputs 10 to 48VDC, or Single input universal supply 88-370VDC or 85-264VAC with single 10-48VDC Backup.

Power Consumption (Typ.) 7 Watts Max.





Weight (g) 670 g


Operating Temperature -40 to 85°C (-40 to 185°F)




Shock IEC60068-2-27



Safety EN60950-1


Fibe

r Po

rt S

peci

ficat

ion




TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

iES6

iES6 iES6

iES6 (cont.)Intelligent 6 Port Ethernet Switch


Supply Mount Ethernet Port 1-4

Ethernet Port 5-6 Description

iES6 LV D 4RJ45 2MMSC

iES6 | | | | Core assembly and packaging






4RJ45 | 4 x 10/100BaseTX RJ45

XX None

2RJ45 2 x 10/100BaseTX RJ45

2MMSC 2 x 100FX Multimode SC, 1310nm, 2Km

2MMST 2 x 100FX Multimode ST, 1310nm, 2Km










2SST100 2 x 100FX Singlemode SC, 1550nm, 100km

Example Order Code: iES6-LV-D-4RJ45-2MMSC-C1-F3.07Description: 6 Port Switch, Dual Input 10-48VDC Power Supply, DIN Rail Mount, 4 x 10/100Base TX RJ45 Ports, 2 x 100 Multimode SC, 2Km FX Ports, Conformal Coating, Firmware version 3.07 C1 – Add for conformal coatingFW – Leave blank for latest firmware



Ethernet SwitchesiES8Intelligent 8 Port Managed Ethernet Switch

Features• Rapid Network Recovery: iRing (recovery time

< 30ms up to 250 ethernet switches)• iBridge is a unique feature that supports third party ring technologies• STP/RSTP/MSTP supported• Supports Auto Negotiation Speed• Supports PTP Client (Precision Time Protocol) clock synchronization• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic• Port Trunking for easy of bandwidth management• SNMP v1/v2c/v3 support for secure network management• RMON for traffic monitoring• Supports LLDP (Link Layer Discovery Protocol)• Port lock to prevent access from unauthorized MAC addresses• Event notification through Syslog, Email, SNMP trap, and Relay Output• iManage Software Suite supports centralized management and

configuration by Web Browser, Telnet, or Console (CLI)• Rigid IP-40 Galvanized Steel Housing• DIN-Rail and wall mounting• 6x10/100Base T(X) or 2x10/100Base (X) SC, ST,

or RJ45 Optional Ports

IntroductionThe iES8 switch is a managed Ethernet switch with Ethernet Redundancy protocols such as iRing (recovery time <30ms up to 250 Ethernet switches), iBridge, and MSTP/RSTP/STP (IEEE 802.1s/w/D). The iES8 can protect your mission-critical applications from network interruptions or temporary malfunctions to restore connectivity with its fast recovery technology. The iBridge technology provides a means to complement and interconnect with most third party proprietary ring technologies. The iES8 can be managed centrally and conveniently by our powerful windows utility called the iManage Software Suite. The product is made from galvanized steel and has a wide operating temperature range from -40 to +85℃ suitable for the harshest of environments without the use of fans.


iS5com

.com

Network Connection






SpecificationsModel Number iES8Physical Ports10/100 Base-T(X) Ports in RJ45Auto MDI/MDIX 6 6 6

100Base-T(X) Ports in RJ45Auto MDI/MDIX 2





Fiber Optical Connector SC or ST SC or ST








Technology

Ethernet Standards

IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3ad for LACP (Link Aggregation Control Protocol)IEEE 802.3x for Flow controlIEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for Authentication


Priority Queues 4


Switch Properties

Switching latency: 7 usSwitching bandwidth: 5.2GbpsMax. Number of Available VLANs: 4095IGMP multicast groups: 1024Port rate limiting: User Define

Security Features

Enable/disable ports, MAC based port securityPort based network access control (802.1x)VLAN (802.1q ) to segregate and secure network trafficSupports Q-in-Q VLAN for performance & security to expand the VLAN spaceRadius centralized password managementSNMPV1/V2c/V3 encrypted authentication and access security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s), Redundant Ring (iRing) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, status, statistics, monitoring, security, SNTP for synchronizing of clocks over network, Support PTP Client (Precision Time Protocol) clock synchronization, DHCP Server / Client support, Port Trunk supportMVR (Multicast VLAN Registration) support



RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. Baud rate setting: 9600bps, 8, N, 1


R.M. Indicator Green : Indicate system operated in iRing Master mode

iRing Indicator Green : Indicate system operated in iRing mode

Fault Indicator Amber : Indicate unexpected event occurred


10/100-T(X) / Fiber Port Indicator Green for port Link/Act. Amber for Link


Power

Redundant Input PowerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply 120-370VDC or 85-264VAC with a single 10-48VDC Backup.

Power Consumption (Typ.) 9 Watt





Weight (g) 1 kg


Operating Temperature -40 ~ 85℃ (-40 ~ 185℉)




Shock IEC60068-2-27



Safety EN60950, UL508 (E331061)



Supply Mount Ethernet Port 1-6

Ethernet Port7


iES8 MV D 6RJ45 1SSC30 1SSC30

iES8 | | | | | Core assembly and packaging







| XX XX None

6RJ45 1RJ45 1RJ45 10/100Base-TX RJ45

1MMSC 1MMSC 100FX Multimode SC, 2Km

1MMST 1MMST 100FX Multimode ST, 2Km

1SST30 1SST30 100FX Singlemode ST, Standard 30km

1SSC30 1SSC30 100FX Singlemode SC, Standard 30km

1SSC50 1SSC50 100FX Singlemode SC, Intermediate Reach 50km

1SSC90 1SSC90 100FX Singlemode SC, Long Reach 90km

Example Order Code: iES8-MV-D-6RJ45-1SSC30-1SSC30-C1-F3.07Description: 8 Port Switch, Dual Input 36-72VDC, DIN Rail Mount, 6x10/100Base-T(X) Ports,2x100Base-F(X) Singlemode SC, 30Km Ports, Conformal Coating, Firmware version 3.07 C1 – Add for conformal coating, FW – Leave blank for latest firmwareNote: If Ports 7 and 8 are selected, connector type RJ45 cannot be combined with Fiber connector types SC or ST.

iES8 (cont.)Intelligent 8 Port Managed Ethernet Switch

Fibe

r Po

rt S

peci

ficat

ion



iES8 (cont.)Intelligent 8 Port Managed Ethernet Switch

iRing

R.M

PWR3

PWR2

PWR1

Fault

Console

Reset

Link/ACT

iRing

R.M

PWR3

PWR2

PWR1

Fault

Console

Reset

Link/ACT

iRing

R.M

PWR3

PWR2

PWR1

Fault

Console

Reset

Link/ACT



Ethernet SwitchesiES10GIntelligent 10 Port Managed Gigabit Ethernet Switch

Features• Rapid Network Recovery: iRing recovery time

< 30ms up to 250 ethernet switches• iBridge is a unique feature that supports third party ring technologies• Supports STP/RSTP/MSTP• Supports PTP Client (Precision Time Protocol) clock synchronization • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic• Port Trunking for easy bandwidth management• SNMP v1/v2c/v3 support for network management• Supports RMON traffic monitoring• Supports DDM (Digital Diagnostic Monitoring) function for SFP modules• Supports LLDP (Link Layer Discovery Protocol)• Port lock to prevent access from unauthorized MAC address• Event notifications via Syslog, Email, SNMP trap, and Relay Output• iManage Software Suite supports centralized management and

configurable by Web-based, Telnet, Console(CLI)• IP-40 Galvanized Steel Housing• DIN-Rail and wall mounting• 7x10/100Base-T(X) ports and up to 3 SFP or RJ45 optional ports

IntroductionThe iES10G is an intelligent managed Gigabit Ethernet Switch. The Intelligent Operating System (iOS) offers many powerful features including iRing delivering a total recovery time <30ms with up to 250 ethernet switches. The iBridge technology, and MSTP/RSTP/STP (IEEE 802.1s/w/D) feature set ensures that the best redundancy options are available to protect mission critical applications from network interruptions. Every function of the iES10G can be managed conveniently using the iManage Software Suite. The iES10G switch supports DDM (Digital Diagnostic Monitoring), which instantly monitors the status of electrical voltage, current, and temperature of the SFP module. The product is made from galvanized steel and has a wide operating temperature range from -40 to +85℃ suitable for the harshest of environments without the use of fans.


iS5com

.com Monitoring and Configuration Interface

IP Connectivity and Configuration Management




SpecificationsModel Number iES10GPhysical Ports10/100 Base-TX Ports (RJ45)Auto MDI/MDIX 7

Gigabit combo Ports with 10/100/1000Base-TX and 100/1000Base-X SFP Ports

3- Base T(X) or 3- Base (X) SFP

Technology

Ethernet Standards

IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3z for 1000Base-XIEEE 802.3ab for 1000Base-TIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol)IEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)


Priority Queues 4


Switch Properties

Switching latency: 7 usSwitching bandwidth: 7.4GbpsMax. Number of Available VLANs: 4095IGMP multicast groups: 1024Port rate limiting: User Defined

Security Features


Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)Redundant Ring (iRing) with recovery time less than 10ms up to 250 units TOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN tagging and GVRP supportedIGMP Snooping for multicast filteringPort configuration, status, statistics, monitoring, securitySNTP for synchronizing of clocks over networkSupports PTP Client (Precision Time Protocol) clock synchronizationDHCP Server / Client supportPort Trunk supportMVR (Multicast VLAN Registration) support

Network Redundancy

iRing iBridgeSTPRSTPMSTP

Warning / Monitoring SystemRelay output for fault event alarmingSyslog server / client to record and view eventsSMTP for event warning notification via emailEvent selection support



R.M. Indicator Green : Indicate system operated in iRing master mode



10/100/1000Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for 100Mbps indicator



Power

Input PowerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply120-370VDC or 85-264VAC with a single 10-48VDC Backup






Weight (g) 1.1 kg


Operating Temperature -40 ~ 85℃ (-40 ~ 185℉)




Shock IEC60068-2-27



Safety EN60950-1




Port 1-7Ethernet Port 8*

Ethernet Port 9 & 10

Description

iES10G HV P 7RJ45 1GRJ45 2SFP**

iES10G | | | | | Core assembly and packaging







| | XX None

7RJ45 | XX 7 x 10/100Base-TX RJ45

1GRJ45 2GRJ45 1 x 10/100/1000 Base-TX RJ45 and 2 x 10/100/1000 TX RJ45

1SFP** 2SFP** 2 x 100/1000Base-X SFP (Blank no optical transceiver)

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONS *DEFAULT PORT TYPE IS GRJ45 PORT 9 & 10 MUST HAVE SAME PORT TYPE Example Order Code: iES10G-HV-P-7RJ45-1GRJ45-1SFP**-2SFP**-C1-F3.07Description: 10 Port Gigabit Switch, Single Input 120-370VDC or 85-264VAC with Single 10-48VDC Backup, Panel Mount, 7x10/100Base-T(X) Ports, 1x10/100/1000Base-T(X) Port, 2x100/1000Base-X SFP** Ports, Conformal Coating, Firmware version 3.07 C1=Add for conformal coating, FW – Leave blank for latest firmware

iES10G (cont.)Intelligent 10 Port Managed Gigabit Ethernet Switch






Ethernet SwitchesiES24GIntelligent 24 Port Managed Gigabit Ethernet Switch

Features• 24 Gigabit ports – 16 x 10/100/1000 Base T(X) or 16 x 100/1000 Base

(X) SFP ports and 8 x 100/1000 Base (X) SFP ports • Supports iRing (recovery time < 30ms with up to 250

Ethernet switches)• MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy• Supports IPV6 • HTTPS/SSH protocol to enhance network security• Supports SMTP client• Supports IP-based bandwidth management• Application-based QoS management• Supports the Device Linking security function• Supports DOS/DDOS auto prevention• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic• Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN

Network Management• Supports ACL, 802.1x User Authentication for security• Supports 9K Bytes Jumbo Frame• Multiple notification for warning of unexpected event• Web-based ,Telnet, Console (CLI), and Windows utility

(iManage Software Suite) configuration • Supports LLDP Protocol• 19 inch rack mountable

IntroductionThe iES24G managed Ethernet switch with Ethernet Redundancy protocols such as iRing (recovery time <30ms with up to 250 Ethernet switches), iBridge, and MSTP/RSTP/STP (IEEE 802.1s/w/D), the iES24G can protect your mission-critical applications from network interruptions or temporary malfunctions to restore connectivity using its fast recovery technology. The unique iBridge technology now provide a means to complement and interconnect with most third party proprietary ring technologies. The switch can be managed centrally and conveniently by our powerful windows utility called the iManage Software Suite. The product is made from galvanized steel and has a wide operating temperature range from -40°C to +85°C suitable for the harshest of environments without the use of fans.


iS5com

.com

Network Connection

Monitoring and Configuration Interface Network Topology View




SpecificationsModel Number iES24GPhysical PortsGigabit ports with 10/100/1000Base-T(X) and/or 100/1000Base-X SFP ports

16

100/1000Base-X SFP ports 8

Technology

Ethernet Standards

IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3ab for 1000Base-TIEEE 802.z for 1000Base-XIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table 8k

Priority Queues 4


Switch PropertiesSwitching latency: 7 us, Switching bandwidth: 48Gbps, Max. Number of Available VLANs: 256, IGMP multicast groups: 128 for each VLANPort rate limiting: User Define

Jumbo Frame Up to 9K Bytes

Security Features


Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s), Redundant Ring (iRing) with recovery time less than 30ms over 250 Ethernet Switches TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP SnoopingIP-based bandwidth management, Application-based QoS management, DOS/DDOS auto prevention, Port configuration, status, statistics, monitoring, security, DHCP Client/Server, SMTP Client

Network Redundancy iRing, iBridge, Fast Recovery Mode, STP, RSTP, MSTP

Warning / Monitoring SystemRelay output for fault event alarming, Syslog server / client to record and view events, SMTP for event warning notification via emailEvent selection support

RS-232 Serial Console Port RS-232, DB9 connector with console cable. 115200bps, 8, N, 1

LED IndicatorsPower Indicator (PWR) Green : Power indicator for AC and DC



System Ready Indicator (STA) Green : Indicates that the system is ready. A blinking LED indicates that the firmware is being upgraded.


iRing Indicator (Ring) Green : Indicates that the system is operating in iRing mode

Fault Indicator (Fault) Amber : Indicates unexpected event occurred

System Running Indicator (RUN) Green : System is operating continuously

Supervisor Login Indicator(RMT) Green : System is accessed remotely

Reset To Default Running Indicator (DEF) Green : System resets to default configuration

Ping Command To The Switch Indicator (Ping) Green : System is processing “PING” request

10/100/1000Base-T(X) RJ45 Port Indicator

Left Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicatorRight Amber for full-duplex indicator



PowerRedundant Input power 12~36VDC, 36~72VDC, 88~300VDC/85-264VAC




Dimension (W x D x H) 478 (W) x 373.6 (D) x 44 (H) mm (18.82 x 14.71 x 1.75 inch)

Weight (g) 4. Kg

EnvironmentalStorage Temperature -40°C to 85ºC (-40°F to 185ºF)

Operating Temperature -40°C to 85°C




Shock IEC60068-2-27



Safety EN60950-1



BasePower Supply 1

Power Supply 2


Ethernet Port 9-16

Ethernet Port 17-24

Description

iES24G LV XX R 8GCX*** 8GCX*** 8GSFP**

iES24G | | | | | | Core assembly and packaging

XX XX | | | | None

LV LV | | | | 24VDC (18-36VDC)

MV MV | | | | 48 VDC (36-59VDC)

HV HV | | | | 88-300VDC or 85-264VAC

R | | | 19" Rack Mount



XX XX | None

8GRJ45 8GRJ45 | 8 X 10/100/1000Base TX RJ45

8GSFP** 8GSFP** | 8 X 100/1000Base (X) SFP (Blank no SFP transceiver)

8GCX*** 8GCX*** |8 X 10/100/1000Base TX RJ45 and 8 X 100/1000Base (X) (Blank no SFP transceiver)

XX None

8GSFP** 8 X 100/1000Base (X) SFP (Blank no SFP transceiver)

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONS*** Of the 16 ports only 8 Ports can be used in combination Example order code: iES24G-LV-LV-R- 8GCX***-8GRJ45-8GSFP**-C1-F3.07Description: 24 Port Gigabit Switch, Single Input Power Supply 1: 24VDC (18-36VDC), Single Input Power Supply 2: 24VDC (18-36VDC), Rack Mount, 8x10/100/1000Base TX RJ45 and 8x100/1000Base (X) Ports, 8x10/100/1000Base-T(X) RJ45 Ports, 8x100/1000Base (X) SFP**, Conformal Coating, Firmware version 3.07C1=Add for conformal coating, FW – Leave blank for latest firmware





18.82 [478.0]

1.26

[32.

0]

18.45 [468.7]

18.14 [460.7]

0.28

[7.0

]14

.71

[373

.6]

13.4

6 [3

41.8

]

17.32 [440.0]



Gigabit SwitchesiES8GIntelligent 8 Port Managed Gigabit Ethernet Switch

Features• Rapid Ring Recovery: iRing (recovery time < 30ms up to 250

ethernet switches)• iBridge is a unique feature that supports third party ring technologies• STP/RSTP/MSTP supported• Supports PTP Client (Precision Time Protocol) clock synchronization• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic• Port Trunking for easy of bandwidth management• SNMP v1/v2c/v3 support for secure network management• RMON for traffic monitoring• Supports DDM (Digital Diagnostic Monitoring) function for SFP modules• Supports LLDP (Link Layer Discovery Protocol)• Event notifications via Syslog, Email, SNMP trap, and Relay Output• Port lock to prevent access from unauthorized MAC address• iManage Software Suite support centralized management and

configurable by Web Browser, Telnet, or Console (CLI)• IP-40 Galvanized Steel housing• DIN-Rail and wall mounting• 4x10/100/1000 Base T(X) Ports or 4x100/1000 Base (X) SFP Ports

IntroductionThe iES8G is a managed Ethernet switch with Ethernet Redundancy protocols such as iRing (recovery time <30ms up to 250 ethernet switches), iBridge and MSTP/RSTP/STP (IEEE 802.1s/w/D). The iES8G can protect your mission-critical applications from network interruptions or temporary malfunctions to restore connectivity with its fast recovery technology. The iBridge technology provides a means to complement and interconnect with most third party proprietary ring technologies. The iES8G can be managed centrally and conveniently by our powerful windows utility called the iManage Software Suite. The product is made from galvanized steel and has a wide operating temperature range from -40 to +85℃ suitable for the harshest of environments without the use of fans.


iS5com

.com


DDM Connection

Network Connection




SpecificationsModel Number iES8GPhysical Ports10/100/1000 Base-T(X) Ports in RJ45, Auto MDI/MDIX 4

Gigabit Combo Port with 10/100/1000Base-T(X) or 100/1000Base-X SFP Port

4 X 10/100/1000Base-T(X) or 4 X 100/1000Base-(X) SFP

Technology

Ethernet Standards

IEEE 802.3i for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3z for 1000Base-X, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)


Priority Queues 4


Switch PropertiesSwitching latency: 7 us, Switching bandwidth: 16Gbps, Max. Number of Available VLANs: 4095, IGMP multicast groups: 1024, Port rate limiting: User Define

Security Features

Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1Q ) to segregate and secure network traffic, Supports Q-in-Q VLAN for performance & security to expand the VLAN space, Radius centralized password managementSNMP V1/V2c/V3 encrypted authentication and access security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s), Redundant Ring (iRing) with recovery time less than 30ms over 250 units, TOS/Diffserv supportedQuality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering. Port configuration, status, statistics, monitoring, securitySNTP for synchronizing of clocks over network, Support PTP Client (Precision Time Protocol) clock synchronization, DHCP Server / Client support, Port Trunk support, MVR (Multicast VLAN Registration) support

Network Redundancy iRing, MSTP




R.M. Indicator Green : Indicate system operated in iRing Master mode

Ring Indicator Green : Indicate system operated in iRing mode


10/100/1000Base-T(X) RJ45 port indicator Green for port Link/Act. Amber for 100Mbps indicator



Power

Redundant Input PowerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply 120-370VDC or 85-264VAC with a single 10-48VDC Backup.

Power Consumption (Typ.) 10 Watt





Weight (g) 1kg






Shock IEC60068-2-27



Safety EN60950-1


Ordering Information 4GRJ45 OPTION (4 X 10/100/1000Base TX RJ45)


Port 1-4Ethernet Port 5

Ethernet Port 6

Ethernet Port 7


iES8G LV D 4GRJ45 1GRJ45 XX XX 1GRJ45

iES8G | | | | | | | Core assembly and packaging

LV | | | | | | Dual Input (10-48VDC)

MV | | | | | | Dual Input (36-72VDC)

HV | | | | | |Single Input 88-370VDC or 85-264VAC with Single 10-48VDC Backup

D | | | | | DIN Rail Mounting



4GRJ45 | | | |4 X 10/100/1000Base TX RJ45

XX XX XX XX None

1GRJ45 1GRJ45 1GRJ45 1GRJ45 10/100/1000Base TX RJ45

1GSFP 1GSFP 1GSFP 1GSFP100/1000 (X) SFP (Blank no optical transceiver**)

1CGX 1CGX 1CGX 1CGX

Combo Port 1 x 10/100/1000Base TX RJ45 and 1 x 100/1000 (X) No transceivers**

6RJ45 OPTION (6 X 10/100Base TX RJ45)


Port 1-4Ethernet Port 5

Ethernet Port 6

Ethernet Port 7


iES8G LV D 6RJ45 XX XX 1GMMSC 1GSSC70

iES8G | | | | | | | Core assembly and packaging

LV | | | | | | Dual Input (10-48VDC)

MV | | | | | | Dual Input (36-72VDC)

HV | | | | | |Single Input 88-370VDC or 85-264VAC with Single 10-48VDC Backup

D | | | | | DIN Rail Mounting



6RJ45 | | | | 6 X 10/100Base TX RJ45

XX XX XX XX None

1GMMSC 1GMMSC 1000 SX Multimode SC, 850nm, 550m

1GMMST 1GMMST 1000 SX Multimode ST, 850nm, 550m

1GSST10 1GSST10 1000 LX Singlemode ST, 1310nm, 10km

1GSSC10 1GSSC10 1000 LX Singlemode SC, 1310nm, 10km





(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONS Example Order Code: iES8G-MV-D-6RJ45-1RJ45-1GSFP**-1RJ45-1GSFP**-C1-F3.07Description: 8 Port Gigabit Switch, Dual Input 10-48VDC, DIN Rail Mount, 6x10/100/1000Base TX Ports, 1x10/100/1000Base TX Port, 1x100/1000 (X) SFP Port, 1x10/100/1000Base TX Port, 1x100/1000 (X) SFP Port, Conformal Coating, Firmware version 3.07 C1 = Add for conformal coating, FW – Leave blank for latest firmware




Console

ConsoleConsole




iES12GIntelligent 12 Port Managed Gigabit Ethernet Switch

Features• 8 Gigabit RJ45 ports and up to 12 Gigabit SFP optional ports• Supports Jumbo frame up to 9.6K Bytes• Rapid Network Recovery: iRing recovery time <30ms up to

250 switches • MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy • Supports IP v6 • Supports SMTP client• Supports IP based bandwidth management• Supports application based QoS management• Supports ring linking security function• Supports DOS/DDOS auto prevention• Supports DDM (Digital Diagnostic Monitoring for SFP Ports 1 to 8)• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic• Supports SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network

Management• Supports ACL, 802.1x User Authentication for security• Multiple notification for warning of unexpected event• iManage Softwae Suite supports centralized management and is

configurable with a Telnet Console (CLI) or a web-based browser• Supports LLDP• Rigid IP-40 galvanized steel housing

IntroductionThe iES12G is a Managed Gigabit Ethernet Switch with Ethernet Redundancy protocols such as iRing (recovery time <30ms with up to 250 Ethernet switches), iBridge, and MSTP/RSTP/STP (IEEE 802.1s/w/D). The iES12G protects your mission-critical applications from network interruptions or temporary malfunctions to restore connectivity with its fast network recovery technology. With the iBridge technology, these switches can provide a means to complement and inter-operate with most third party proprietary ring technologies. The iES12G can be managed centrally and conveniently by our powerful windows utility called the iManage Software Suite.

The iES12G is backed by a fanless, IP-40 galvanized steel enclosure and a wide operating temperature range of -40 to +85ºC to suit the harshest of environments. This switch provides an advanced IP-based bandwidth management which limits the maximum bandwidth for each IP device. Users can configure an IP camera and NVR with the required bandwidth and limit the bandwidth for other decoders. The iES12G switch also supports application-based QoS. Application-based QoS can set the highest priority for data streaming according to the TCP/UDP port number. iS5Com’s special linking function can permit only allowed IP addresses with a MAC address to access the network. Intruders will not be able to access the IP surveillance network without permission. Our switches also provided advanced DOS/DDOS auto prevention. If any IP flow gets too large in a short period of time, the switch will lock the source IP address out for a certain amount of time to prevent an attack. This hardware based prevention can prevent DOS/DDOS attacks in real-time. The iES12G can be managed centrally and conveniently by our powerful windows utility called iManage Software Suite. Therefore, this switch is one of the most reliable choices for highly-managed Gigabit Fiber Ethernet applications.

iManage Software Suite

iS5com

.com

Gigabit Switches

Fiber Network Connection






SpecificationsModel Number iES12GPhysical PortsGgiabit Combo Port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports

8

1000Base-X SFP Port 4

Technology

Ethernet Standards

IEEE 802.3i for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3z for 1000Base-XIEEE 802.3ab for 1000Base-TIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol)IEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table 8k

Priority Queues 4


Switch Properties

Switching latency: 7 usSwitching bandwidth: 24GbpsMax. Number of Available VLANs: 4095IGMP multicast groups: 128 for each VLANPort rate limiting: User Define

Jumbo Frame Up to 9.6K Bytes

Security Features


Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)Redundant Ring (iRing) with recovery time less than 30ms over 250 ethernet switchesTOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN tagging and GVRP supportedIGMP SnoopingIP-based bandwidth managementApplication-based QoS managementDOS/DDOS auto preventionPort configuration, status, statistics, monitoring, securityDHCP Client/ServerSMTP Client

Network Redundancy

iRing Fast Recovery ModeSTP / RSTP compatibleMSTP

Warning / Monitoring SystemRelay output for fault event alarmingSyslog server / client to record and view eventsSMTP for event warning notification via emailEvent selection support



R.M. indicator Green : indicate system operated in iRingMaster Mode

Ring indicator Green : indicate system operated in iRing Mode

Fault indicator Amber : Indicate unexpected event occurred

10/100/1000Base-T(X) RJ45 port indicator Green for port Link/Act. Amber for Duplex/Collision

SFP Fiber port indicator Green for port Link/Act.


Power

Redundant Input powerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply 120-370VDC or 85-264VAC with a single 10-48VDC Backup





Dimension (W x D x H) 96.4 (W) x 108.5 (D) x 154 (H) mm (3.8 x 4.2.7 x 6.06 inch)

Weight (g) 1.4KG






Shock IEC60068-2-27



Safety EN60950-1





Description

iES12G HV D 8GRJ45 XX

iES12G | | | | Core assembly and packaging







XX XX None

8GRJ45 XX 8 X 10/100/1000BaseTX RJ45

8SFP** XX 8 X 100/1000 BASE (X) SFP (Blank no SFP transceiver)

8GCX*** 8 X 10/100/1000BaseTX RJ45 and 8 X100/1000Base (X) SFP** (blank)

4SFP** 4 X 1000 BASE (X) SFP (Blank no SFP transceiver)

(SFP**) SEE ACCESSORIES LIST FOR SFP TRANSCEIVER OPTIONSExample Order Code: iES12G-HV-D-8GRJ45-XX-C1-F3.07Description: 12 Port Gigabit Switch, Single Input 120-370VDC or 85-264VAC with Single 10-48VDC Backup, DIN Rail Mount, 8-10/100/1000Base TX Ports, XX,Conformal Coating, Firmware version 3.07 C1=Add for conformal coating, FW – Leave blank for latest firmware



iES12G (cont.)Intelligent 12 Port Managed Gigabit Ethernet SwitchDimensionsAll Dimensions are in Inches



iES18GIndustrial 18 Port Managed Ethernet Switch

Features• Up to 16x10/100Base (TX), and 2 x 100Base (X) or

2 x 1000Base (X) Ports• Fastest Redundant Ethernet Ring : iRing (recovery time <30ms with up to

250 Ethernet Switches)• iBridge supports other vendors’ ring technology in open architecture• STP/RSTP/MSTP supported• Supports PTP Client (Precision Time Protocol) clock synchronization• IGMP v2/v3 (IGMP snooping for support) filtering multicast traffic• Port Trunking for easy of bandwidth management• SNMP V1/V2c/V3 support for secured network management• RMON for traffic monitoring• Supports LLDP protocol• MRP: Media Redundancy Protocol (MRP) IEC 62439-2• Event notification through Syslog, Email, SNMP trap, and Relay Output• Port lock to prevent access from unauthorized MAC address• Windows utility (iManage Software Suite) supporting centralized

management and configurable by Web-based, Telnet, and Console (CLI)• Supports two Gigabit combo ports• Rigid IP-40 housing design• DIN-Rail and wall mount

IntroductionThe iES18G managed Ethernet switch with Ethernet Redundancy protocols such as iRing (recovery time <30ms with up to 250 Ethernet Switches), iBridge, and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions to restore connectivity using its fast recovery technology. The unique iBridge technology now provides a means to complement and interconnect with most third party proprietary ring technologies. The switch can be managed centralized and convenient by a powerful windows utility called the iManage Software Suite. The product is made from galvanized steel and has a wide operating temperature from -40°C to 85°C suitable for the harshest of environments without the use of fans.

SpecificationsModel Number iES18GPhysical Ports10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 16

10/100/1000Base T(X), or 100Base (X), or 1000Base (X) 2

Technology

Ethernet Standards

IEEE 802.3 for 10Base-TIEEE 802.3u for 100Base-TX and 100Base-FXIEEE 802.3z for 1000Base-XIEEE 802.3ab for 1000Base-TXIEEE 802.3x for Flow controlIEEE 802.3ad for LACP (Link Aggregation Control Protocol )IEEE 802.1D for STP (Spanning Tree Protocol)IEEE 802.1p for COS (Class of Service)IEEE 802.1Q for VLAN TaggingIEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)IEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)


Priority Queues 4


Switch PropertiesSwitching latency : 9 μs Switching bandwidth : 7.2GbpsMax. Number of Available VLANs : 4096 IGMP multicast groups : 1024Port rate limiting : User Define

Security Features


Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)Redundant Ring (iRing) with recovery time less than 30ms over 250 unitsTOS/Diffserv supportedQuality of Service (802.1p) for real-time trafficVLAN (802.1Q) with VLAN tagging and GVRP supportedIGMP v2/v3 (IGMP snooping support) for multicast filteringPort configuration, status, statistics, monitoring, security SNTP for synchronizing of clocks over networkSupport PTP Client (Precision Time Protocol) clock synchronization DHCP Server / Client supportPort Trunk supportMVR (Multicast VLAN Registration) support





Power

Redundant Input PowerDual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Single input universal supply 88-370VDC or 85-264VAC with a single 10-48VDC Backup





Dimension (W x D x H) 96.4(W)x108.5(D)x154(H) mm (3.8 x 4.27 x 6.06 inch)

Weight (g) 1220 g






Shock IEC60068-2-27



Safety EN60950-1


iS5com

.com

Gigabit Switches



iES18G (cont.)Industrial 18 Port Managed Ethernet Switch



Ethernet Port 17&18 Description

iES18G HV D 8RJ45 8RJ45 2GSSC40

iES18G | | | | | Managed core assembly and packaging

uES18G | | | | | Unmanaged core assembly and packaging







8RJ45 8RJ45 | 8 X 10/100Base TX RJ45

XX None

2GRJ45 2 x 10/100/1000Base TX RJ45

2GSFP 2 x 1000Base (X) SFP (Blank no SFP transceiver**)

2MMSC 2 x 100FX Multimode SC, 1310nm, 2Km

2MMST 2 x 100FX Multimode ST, 1310nm, 2Km








Ethernet Port 17&18 Description






2GMMSC 2 x 1000 SX Multimode SC, 850nm, 550m

2GMMST 2 x 1000 SX Multimode ST, 850nm, 550m







Example Order Code: iES18G-HV-D-8RJ45-8RJ45-2GSSC40-C1-F3.07Description: 18 Port Gigabit Switch, Single Input 88-370VDC or 85-264VAC with Single 10-48VDC Backup Power Supply, DIN Rail Mount, 16x10/100Base TX Ports, 2x1000 LX Singlemode SC, 40Km Ports, Conformal Coating, Firmware version 3.07C1 – Add for conformal coatingFW – Leave blank for latest firmware



C O MTM

iES20G

C O MTM

iES20GC O M

TM

iES20G



Specialty ProductsiROCIntelligent Robust On-site Commander

Features• Available with Dual Redundant Hi-Voltage AC/DC Power Supplies• Fully Featured x86 based Computing Device• AMD G-Series Fusion Dual-Core 64 bit CPU, up to 1.00Ghz• Dual 10/100/1000Base-TX Ethernet ports• 4GB DDR3 RAM • Up to 256Gbyte SSD• IRIG-B TTL Input with Sync LED Indication• Dual USB2.0 high speed ports• HDMI 1.4 Interface, supports 1920x1200 resolution• Serial Console port• Supports Linux, Windows 7• Fully compliant with IEC 61850 and IEEE 1613• Over 100,000 hours MTBF

IntroductionThe iROC hardened computing device provides robust platform for substation automation, security and other applications development. This device is fully compliant with IEC 61850, IEEE 1613 and can synchronize with IRIG-B timing which makes it unique for substation automation applications.

SpecificationsModel Number iROCPhysical Ports

Port Types

2 ports 10/100/1000 Base-TX2x ports USB2.0Serial Console PortHDMI 1.4IRIG-B TTL Input

TechnologyCPU AMD G-Series Fusion Dual-Core 64 bit CPU, up to 1.00Ghz

Operating Systems Linux , Windows 7

Power

Redundant power input with FailSafe Relay

Dual 24VDC power inputs at terminal block


Dual 110/220VDC/AC (88~264VAC / 100~370VDC) power inputs at terminal block


Physical CharacteristicEnclosure Din Rail or Panel Mounting




Regulatory ApprovalsSubstation Automation IEC 61850-3, IEEE 1613


EMS

EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11



BasePower Supply 1

Power Supply 2

Mount SSD IRIG-B Description

iROC | | | | | Core assembly and packaging

XX XX | | | None

LV LV | | | 24VDC (18-36VDC)

MV MV | | | 48 VDC (36-72VDC)

HV HV | | | 88-300VDC or 85-264VAC

D | | DIN rail Mounting



8GB | 8GB - SSD mSATA, Industrial Temp.





XX None

IRIG IRIG-B TTL Input

Example order code: iROC-LV-MV-D-8-IRIG-C1Description: Hardened Computing Device, Single Power Supply 1: 24VDC (18-36VDC), Single Input Power Supply 2: 48VDC (36-72VDC), DIN Rail Mount, 8G SSD, IRIG-B TTL InputC1 – Add for conformal coating, FW – Leave blank for latest firmware


iS5com

.com



iSG4FIntelligent Flexible Secure Gateway IEC 61850-3 and IEEE 1613 compliant

Features• Designed for secure remote connections over public networks• Layer 2 and Layer 3 VPN with IPSec• Network Uplink over Ethernet or Cellular• SCADA firewall for validating all traffic to the device• Supports 2 x RS232 ports, or 1 x RS232 and 1 x RS485 port• Supports 1 x 10/100 Base (TX) and 1 x 1000 Base (X) Ethernet ports• Supports 2 x SIM Cellular Interfaces for connecting to remote isolated

sites (with VPN) over a cellular network• Supports Layer 3 protection using Dynamic protocols like OSPF and RIP• Supports Gateway Translation for IEC 101, IEC 104, Modbus, and DNP3• Rigid IP-40 Galvanized metal housing• DIN Rail or Wall mount option• Available with Dual Power Supplies

IntroductionThe iSG4F Flexible Secure Gateway is designed for use in remote sites that require secure remote connections over a public network (via serial or IP connection). A serial RTU/IED connected to an iSG4F would communicate its data over a landline or a cellular public/private connection for those sites that are remotely distributed and connected to a SCADA control center. The user data can either be transparently encapsulated over an IP tunnel, or converted to an IP SCADA session using the integrated SCADA gateway. Network connectivity is secured using a Layer 2 or Layer 3 VPN with IPSec, as well a SCADA firewall for validating all traffic to the device. The iSG4F can be managed centrally and conveniently by our powerful Windows utility called the iManage Software Suite. The product is made from galvanized steel and has a wide operating temperature from -40°C to 85°C suitable for the harshest of environments without the use of fans.

SpecificationsModel Number iSG4FPhysical Ports10/100/1000Base-T(X) Ports in RJ45 1

100/1000Base-X with SFP port 1

2 Serial Ports 1 or 2 x RS232 DB-9, or 1 RS485 RJ45 and 1 x RS232 DB-9

Cellular GPRS/UMTS with 2 SIM Cards

Discrete Lines 2 In, 2 Out

Technology

Networking

SCADA Gateway for IEC 101/104ModBus RTU/TCP and DNP3Terminal Server Frame and Byte ModesSerial Transparent Tunneling Byte ModeLayer 3 mGRE DM-VPNLayer 3 IPSec VPNLayer 2 VPN GREQOS: Prioritization, Shaping, Scheduling, Limit, QueuesDiscrete IO ControlDiscrete IO TunnelingIEEE 802.1x for AuthenticationIEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

RoutingStatic RoutingOSPF V2, V3IPv4

SwitchingAuto CrossingAuto Negotiating IEEE 802.3abVLAN Tagging

Time Local Time SettingsNTP

DiagnosticCounters and Statistics per PortLED DiagnosticsPing

Protection Conditioned/Scheduled System Reboot OSPF V2, V3Protection between Cellular ISP (SIM Card Backup)

Security Features

Firewall Learning ModeVPN Encryption using AES, 3DESSCADA firewall for IEC 101/104, Modbus and Firewall DNP3Firewall Simulation ModeFirewall ModBus RTUFirewall ModBus TCPIEC 101 FirewallIEC 104 FirewallIPSecIPSec Certificates X.509IPSec Dynamic Key ExchangeLocal AuthenticationMAC LimitSFTP Client

Management

Backup/Restore Running Config Conditioned/Scheduled System ReBootRemote UpgradeIn-Band ManagementSafe ModeFTP Client, TFTP ClientSyslog, Severity Levels, Multiple Targets


Power

Redundant Input power Dual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Dual input universal supply 88-370VDC or 85-264VAC

Power consumption (Typ.) TBD


Reverse Polarity Protection Present

iS5com

.com

Specialty Products

Remote site access over redundant cellular networks

Remote site access over fiber and a backup cellular link




iSG4F (cont.)Intelligent Flexible Secure Gateway IEC 61850-3 and IEEE 1613 compliant



Dimension (W x D x H) 5 x 6.44 x 6.07 inches






EMSEN61000-4-2 (ESD), EN61000-4-3 (RS),EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Shock IEC60068-2-27



Safety EN60950-1


Specifications (cont.) Ordering Information

BasePower Supply 1

Power Supply 2

Mount Serial Interface

Ethernet Port 1-2

Cellular Port Description

iSG4F HV XX D 2DB9 1GRJ451GSFP 2SIMiSG4F | | | | | | Core assembly and packaging

| XX | | | | NoneLV LV | | | | Power Supply Input (10-48VDC)MV MV | | | | Power Supply input (36-72VDC)


D | | | DIN Rail MountingP | | | Panel MountingN | | | No Mounting Hardware

XX | | None2SRJ45 | | 2 X RS232 Serial RJ45 Ports

2CRJ45 | | 1 X RS232 Serial RJ45 Port and 1 X RS485 Serial RJ45 Port

1GRJ45&1GSFP |1 X 10/100/1000 Base TX RJ45 and 1 X 100/1000 Base X SFP Port (Blank no SFP transceiver**)

2SIM Dual SIM GPRS/UMTSSFP** SEE ACCESSORIES FOR SFP TRANSCEIVER PRICING

Example Order Code: iSG4F-HV-XX-D-2SRJ45-1GRJ45&1GSFP-2SIMDescription: Flexible Secure Gateway, Power Supply 1 Input 88-370VDC or 85-264VAC, Power Supply 2 None, DIN Rail Mount,2SRJ45, 1x10/100/1000 TX, 1x100/1000 SFP Port, Dual SIM PortsC1 – Add for conformal coating, FW – Leave blank for latest firmware


iSG18GFPIntelligent 18 Port Compact Service Aware Ethernet Switch IEC 61850-3 and IEEE 1613 Compliant

Features• Designed for secure remote connections over public networks• Layer 2 and Layer 3 VPN with IPSec• Network Uplink over Ethernet or Cellular• SCADA firewall for validating all traffic to the device• Supports 4 x RS232 ports with Enhanced 2KV Isolation• Supports 2 x 1000 Base (X) SFP, up to 16 x 10/100 Base (TX) RJ45, and 8

x 100 Base (X) SFP Ethernet Ports• Switch Latency <10µSec• Supports 1588v2 PTP Transparent Clock• Supports Dual SIM GPRS/UMTS Modems• Supports Layer 3 protection using Dynamic protocols like OSPF, VRRP

Redundancy Scheme, and RIPv2 Routing.• Supports Gateway Translation for IEC 101, IEC 104, Modbus RTU,

Modbus TCP, DNP3 IP, and DNP3 RTU.• Local and Remote User Authentication (RADIUS, TACACS)• Rigid IP-40 Galvanized metal housing.• DIN Rail or Wall mount option• Available with Dual Power Supplies

IntroductionThe iSG18GFP is a powerful Compact Service-Aware Ethernet switch designed with a unique strong packet processing application-aware engine to fit the most critical industrial application. The optional support of an integrated firewall on each port of the iSG18GFP provides a network based distributed security. The switch also contains a VPN gateway with 2 operational modes: Inter-site connectivity using IPSec tunnels, and remote user access via SSH. The iSG18GFP is a natural fit for installation at MV/LV Transformer Sites acting as secure access points for the Distributed Automation control of remote sites. This product acts as a secure gateway for Ethernet, IP, and Serial services as an optimized platform for servicing these needs over the network core. The iSG18GFP can be managed centralized and conveniently by a powerful Windows utility called the iManage Software Suite. The product is made from galvanized steel and has a wide operating temperature from -40°C to 85°C suitable for the harshest of environments without the use of fans.

SpecificationsModel Number iSG18GFPPhysical Ports10/100 Base-T(X) Ports in RJ45 Up to 16

100 Base-X SFP ports Up to 8

1000 Base-X SPF Ports 2

Serial Ports 4 with 2KV Isolation

Cellular GPRS/UMTS with 2 SIM Cards

Technology

Networking (Advanced Layer 2)

ITU-T G.8032v2 Ethernet ring (<50ms recovery)IEEE 802.1s MSTPIEEE 802.1w RSTP, enhanced RSTPIEEE 802.3ad LAG with LACPIEEE 802.1q VLAN segregationAccess Lists according to L2-L4 headersIEEE 802.1p per port queues802.1x Port based network access controlDHCP Client and RelayQOS Prioritization, shaping, SchedulingOAM EFM IEEE 802.3ahOAM CFM ITU-T Y.1731/IEEE 802.1ag1588v2 PTP Transparent ClockJumbo frames supported

Routing (Layer 3)

Static RoutingOSPF V2, V3RIPv2VRRPIPv4

Protocol HandlingModBus RTU – ModBus TCPIEC 101 – IEC 104DNP3 IP – DNP3 RTUTerminal Server

Performance

Line Rate L2/L3 Switching ThroughputSwitching Latency <10µSec16K MAC Addresses4K VLAN’sL2 MulticastIGMP Snooping for Traffic Optimization

Security Features

Enable/Disable portPort access filter per MAC / IP addressesIEEE 802.1x port-based authenticationProtect against DoS attacksEgress filtering per VLANSCADA service-aware firewall per portRemote access using SSH tunnelLayer 2 GRE Transparent Ethernet BridgingLayer 3 GRE DM-VPNIPSec encryptionUser policy for traffic typeIKE, AES or 3DES encryptionDynamic key exchangeNAT traversal

Management

Command-Line interface over local consoleor over remote SSHSNMPv1/v2/v3Local and remote user authentication(RADIUS, TACACS)Network elements auto-discovery Wizard for Ethernet ring configurationEnd-to-End service groups provisioningSecurity rules planning per service groupNetwork performance & diagnostics tools

Local Operation

RS-232 console portLocal USB port for emergency bootDiscrete inputs for user-defined triggersDiscrete outputs reporting system alarmsFailsafe output relay reporting critical alarm

Power

Redundant Input power Dual DC inputs 10 to 48VDC, Dual DC Inputs 36-72VDC, or Dual input universal supply 88-370VDC or 85-264VAC

iS5com

.com

Specialty Products

Secure Connection using the iSG18GFP




iSG18GFP (cont.)Intelligent 18 Port Compact Service Aware Ethernet Switch IEC 61850-3 and IEEE 1613 Compliant


Specifications (cont.) Ordering InformationPhysical CharacteristicEnclosure IP-40

Dimension (W x D x H) 5 x 6.44 x 6.07 inches


Operating Temperature -40 to 85°C (-40 to 185°F )




EMS

EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge),EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Shock IEC60068-2-27



Safety EN60950-1


BasePower Supply 1

Power Supply 2


Ethernet Port 9-10

Options Description

iSG18GFP HV XX D 8RJ45 2GSFP XXiSG18GFP | | | | | | Core assembly and packaging

| XX | | | | NoneLV LV | | | | Power Supply Input (10-48VDC)MV MV | | | | Power Supply input (36-72VDC)


D | | | DIN Rail MountingP | | | Panel MountingN | | | No Mounting Hardware

8RJ45 | | 8 x 10/100 Base TX RJ45

8PRJ45 | | 8 x 10/100 Base TX RJ45 PoE Ports 30W Max per port***

XX | None

2GSFP | 2 x 100/1000 Base X SFP Port (Blank no SFP transceiver**)

XX None8RJ45 8 x 10/100 Base TX RJ45

8SFP 8 x 100 Base X SFP Port (Blank no SFP transceiver**)

4SRJ45 4 x RS232 RJ45 Serial Ports with 2KV Isolation

2SIM Dual SIM GPRS/UMTS Modem

6GCX 4 x RS232 RJ45 Serial Ports with 2KV Isolation + Dual SIM

SFP** SEE ACCESSORIES FOR SFP TRANSCEIVER PRICING *** NOTE: PoE Ports only supported with MV and HV supplies.Example Order Code: iSG18GFP-MV-XX-D-8RJ45-2GSFP-XXDescription: Flexible Secure Gateway, Power Supply 1: Input 36-72VDC, Power Supply 2: None, DIN Rail Mount, 8x10/100 TX, 2x100/1000 SFP Port, No OptionsC1 – Add for conformal coating, FW – Leave blank for latest firmwaree


iPJ4GIndustrial 2-Port PoE Plus High Power Injector

Features• Supports 2x10/100/1000Base-T(X) for power and data Output• Fully compliant with IEEE802.3at/802.3af standard• Auto protection for Over Voltage Power Input and over current output• Supports a total Power Output of up to 90Watts.• Supports dual power input ranges of 24Vdc, 48Vdc, and Dual high

voltage• Universal supplies• High reliability and rigid IP-40 housing• DIN-Rail and Wall Mount Design

IntroductionThe IPJ4G is an IEEE802.3at compliant device that acts as a high powered PoE injector. The device will not provide power until it has detected a valid PoE signature from the PoE devices attached downstream. This provides damage protection to non-PoE compliant equipment which may be connected to the Ethernet cable. This intelligent detection only allows IEEE 802.3at/802.3af compliant devices to be powered with the IPJ4G PoE Injector. Because of its 24~50Vdc input and 90 watt power output, the installer does not have to be concerned about voltage drops across long cable lengths.

Note: The equipment being powered must be fully IEEE 802.3at/802.3af compliant in order for the power supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).

SpecificationsModel Number iPJ4GPhysical PortsRJ-45 Ethernet Port Input 2RJ-45 Ethernet Port with P.S.E. Output 2

Operating Voltage

Input Voltage Dual DC inputs 10-48VDC, Dual DC 36-72VDC, and Dual AC/DC power inputs. 85-264VAC / 88-370VDC.

Output Voltage 50V / 900mA, 45 Watts max. Per port

ProtectionShort Circuit Protection PresentOver Load Protection PresentHigh Voltage Protection Present

Physical CharacteristicEnclosure IP-40Dimension (W x D x H) 5 x 6.44 x 6.07

EnvironmentalStorage Temperature -40 to 85°C (-40 to 185°F)Operating Temperature -40 to 85°C (-40 to 185°F)Operating Humidity 5% to 90% Non-condensing



Shock IEC60068-2-27Free Fall IEC60068-2-32Vibration IEC60068-2-6Safety EN60950-1WarrantyWarranty 5 Years


Base Power Supply 1

Power Supply 2 Mount Ports 1-2 Description

iPJ4G MV XX D 2GRJ45

iPJ4G | | | | Core assembly and packaging

| XX | | None

LV LV | | Power Supply Input (10-48VDC)

MV MV | | Power Supply Input (36-72VDC)

HV HV | | Power Supply Input 88-370VDC or 85-264VAC

D | DIN Rail Mounting

P | Panel Mounting

N | No Mounting Hardware

2GRJ45 2 X 10/100/1000BaseTX RJ45 PoE Plus

Example Order Code: iPJ4G-HV-XX-D-2GRJ45-2GSFPDescription: Industrial 2 Port PoE Plus Injector, Power Supply 1: Input 36-72VDC,Power Supply 2: None, DIN Mount, Two, 2 x 10/100/1000 TX RJ45 PortsC1 – Add for conformal coating

iS5com

.com

Specialty Products




iPJ4G (cont.)Industrial 2-Port PoE Plus High Power Injector



iCareSupport ServicesHighlights• Best in class Services & Support Organization• Leverage iS5Com’s domain expertise & experience in Hardened

applications.• In-depth understanding of Communications Infrastructure within our

Core Markets (IEC 61850-3, IEC 11613 Class 2, IEEE 1588, EN Certification).

• Dedicated remote iS5Com Tier 2 support.• Remote network communications administration

“iCare” Service Level Agreement – Mission Critical Applications iS5Com cares about the customer and we strive to ensure your Return of Investment is our top priority. Your best defense to ensuring you have a stable network is access to our Support line.

iS5Com provides you with the options from our “iCare” Service Level Agreements (SLA). Select between one of our “iCare Programs” or a “Customized iCare” package.

Having a remote iS5Com expert ensures that your quality of Service & Support for your applications have minimal impact on its performance.

Key Features:• Access to our Technical Assistance Center (TAC)• Direct access to a dedicated Tier2 iS5Com Expert• On-line troubleshooting and diagnostics.• On-line configuration • Critical incident reporting and regular

activities report • Active case management and weekly reporting• Escalations management and weekly reporting• Improve reliability and administration of your iS5Com network• Software updates and upgrades

iCare Program Matrix – Mission Critical ApplicationsComponents iCare Bronze iCare Silver iCare Gold iCare Platinum

Software Upgrades

User Guides

Knowledge Base

Release Notes

Application Notes

Data Sheets

E-mail Forms

Hardware Support

Five Year Warranty

Repair Returns

Advance Replacements

Advance Replacements - 24HR

Extended Warranty

Remote Phone Support

5x12

24x7

Dedicated Support Contact

Priority Escalation

Bi-weekly Status Reports

iCare Program Component DescriptionSoftware Upgrades: Access to firmware specific to your hardware, download new feature releases from iS5Com website.

User Guides: Access and download our latest User Manuals from iS5Com’s website.

Knowledge Base: iS5Com hosts a suite of Technical Information including User Manuals, Configuration guides, installation guides, Frequently Asked Questions (FAQ’s), Data Sheets and Application Notes.

E-Mail Forms: Use of iS5Com’s online Support form.Warranty: iS5Com’s five year hardware warranty provides the assurance that your hardware is protected for parts and labour defects.Repair Returns: In case of hardware system failure, send your defective unit for replacing the defective parts or unit after thorough analysis. iS5Com will ship the repaired unit 5 days after the failed unit has been received at iS5Com repair facility.

Advance Replacements: iS5Com provides Advance Replacement on your hardware until you can send back the defective unit from your field operations. New replacement lead times are from 7-10 business days after the request has been made through our TAC.

Advance Replacements – 24 Hours: If you need quicker lead times iS5Com provides 24 hour shipping on replacements.

Extended Warranty: Protect your Return of Investment with iS5Com’s extended warranty offering, you can select an additional five years extended on top of your current five year warranty giving you total protection of your hardware for 10 years.

Remote Phone Support: Access to an iS5Com Support Engineer through our Toll Free Support Hotline by selecting the appropriate

iCare Programs: 5x12 Monday thru Friday from 8am – 8pm local time.24x7 24 hours 7 days a week

Dedicated Support Contact : iS5Com can provide you with a remote dedicated support contact who understands the history of your network.Priority Escalation: Get the priority you need, your case ticket will be prioritized with iS5Com through our comprehensive priority escalation to senior management for any critical issues.

Bi-Weekly Status Reports: Keep track of all your reported case tickets, iS5Com can provide bi-weekly status of all your issues reported and progress of resolution.

iSERVICES & iSUPPORT



Co-Managed ServicesSupport ServicesHighlights• Best in class Services & Support Organization• Leverage iS5Com’s domain expertise & experience in Hardened



• Dedicated remote iS5Com Tier 2 support.• Remote network communications administration

iS5Com cares about the customer and we strive to ensure your Return of Investment is our top priority. Let our Support Services organization of experienced Domain Expertise provide you with your own “Remote iS5Com expert”

iS5Com’s Co-Managed Services will work with you to ensure your Communications network is properly administered with additional service provisioning to mitigate any potential problems. Having a remote iS5Com expert ensures that your quality of service for your applications have minimal impact on its performance.

Key Features:• Virtual Network Operations Center (NOC)• Direct access to a dedicated Tier2

iS5Com Expert• On-line troubleshooting and diagnostics.• On-line configuration • Critical Incident reporting and regular

activities report • Active case management and weekly reporting• Escalations management and weekly reporting• Bridges skills gaps for your organization• Improve reliability and administration of

your iS5Com network.


Co-Managed Services ProcessiS5Com Co-Managed process includes and not limited to the following activities:

Optimize Performance

• Provision Moves, Adds & Changes (MAC’s) on iS5Com network

• Remote management from iS5Com’s control center via Telnet

• Remote Single point for troubleshooting and fault isolation

Active Monitoring & Reporting

• Identify key stakeholders and availability

• Coordinate with stake holders on all processes relating to fault escalation and process improvements to avoid downtime.

• Reporting – weekly, monthly or quarterly on health status of network with stake holders.

• Critical Incident Reporting direct to iS5Com R&D to maximize resolution time.

• On-site reporting of new features and enhancements.

Field Management

• Coordinate tickets for Return Manufacturing Authorizations (RMA’s)

• Work with Field Ops for Remote Configurations

• Remote Product Orientation to Field Ops

• Product and process documentations & recommendations.

• Preventative maintenance Orientation.• Tier 2 Network Administration

remotely.


Consulting ServicesProfessional ServicesHighlights• Best in class Services & Support Organization• Leverage iS5Com’s domain expertise & experience in Hardened



• Provide for Scalability, Performance, Optimization, Security considerations and a dynamic Ethernet/IP based network

Investment is our top priority. Let our Professional Services organization of experienced Domain Expertise provide you with “End to End” solutions for your Mission Critical Networks.Our top notch Consultants will work with you to ensure your Communications network is designed with the highest level of performance, security, reliability and scalability.

Our breadth of Services range from the following:• Consulting – Security & Communications• Design• Planning• Optimization• Staging• Configuration• Commissioning & Acceptance Testing• Project Management• Network Management Systems Implementation and Customization• Documentation as per the As-Built


Consulting ProcessiS5Com Consulting process includes and not limited to the following activities:

Consulting

• Initial meeting with an iS5Com Expert to assess and review business requirements

• Evaluate the specific needs of the hardened application

• Compile specific documents related to existing network and various elements connectivity

• Assess and review to provide for best practices Design and Security considerations.

• Planning for a reliable performance oriented design

• Present design and document to key stakeholders

• Discussion and recommendations for stake holder input

• Proof of Design

Implementation

• Ensure Network equipment specified as per design is available for onsite staging

• Confirm hardware is accessible for configuration to iS5Com Expert

• Stage equipment in Controlled environment

• Configure as per design• Test configuration connectivity• Demonstrate Proof of concept to stake

holders• Modify where required as per

additional requests from stake holders• Stake holder approval• Deploy for infield Service

Deployment

• Coordinate with key personnel for onsite work accessibility

• Configure devices• Ensure configuration parameters are

aligned with Design• Test connectivity to stake holder

Operations Center• Handoff to Stake Holder after

Acceptance criteria met



Resident EngineerProfessional ServicesHighlights• Best in class Services & Support Organization• Leverage iS5Com’s domain expertise & experience in Hardened



• Dedicated onsite iS5Com Tier 2 support• Knowledge transfer, training and documenting

iS5Com cares about the customer and we strive to ensure your Return of Investment is our top priority. Let our Professional Services organization of experienced Domain Expertise provide you with your own “In-House iS5Com expert”iS5Com’s Resident Engineer will work with you to ensure your Communications network is regularly maintained and pro-actively checked to mitigate any potential problems. Having your own iS5Com expert gives you 24x7x365 days access locally as part of your staff.

Key Features:• Stay up-to-date with latest firmware and features• “Real-time” troubleshooting and diagnostics• Firmware updates• Identify opportunities to minimize downtime• Pro-active reporting• Active health check of network and components affecting

communications infrastructure• Deep understanding of your network and application• Mitigate future deployment related issues• Overcomes skills gaps for your organization• Improve reliability and administration of your iS5Com network


Resident Engineer ProcessiS5Com Resident Engineer process includes and not limited to the following activities:

Optimize Performance

• RE’s are highly trained and competent Tier 2 engineers who conduct operational and architectural reviews

• Our extensive field and best practices experience will allow your organization to have a simplified management for seamless network operations

• Point out “point of failures” to mitigate downtime and provide for immediate improvement

• Maximize the health of your network through process

• Single point for troubleshooting and fault isolation

• Ongoing assessment of various network elements that may hinder performance

Active Monitoring & Reporting

• Identify key stakeholders and availability

• Coordinate with stake holders on all processes relating to fault escalation and process improvements to avoid downtime

• Reporting – weekly, monthly or quarterly on health status of network with stake holders

• Critical Incident Reporting direct to iS5Com R&D to maximize resolution time

• Onsite reporting of new features and enhancements and demo’s

Field Management

• Coordinate tickets for Return Manufacturing Authorizations (RMA’s)

• Onsite Configurations• Product Training and Orientation of

staff• Product and process documentations.• Preventative maintenance training• Tier 2 Network Administration


**SFP’s to be ordered separately.

SFP Module # Description

SFP100-MM-2 SFP 100Mbps Multimode LC Transceiver 2km, 1310nm, -40℃ ~ +85℃

SFP100-SM-30 SFP 100Mbps Singlemode LC Transceiver 30km, 1310nm, -40℃ ~ +85℃




SFP100BIDI1-SM-20 SFP 100Mbps Bi-Directional Singlemode LC Transceiver 20km, TX1310 nm, RX1550nm, -40℃ ~ +85℃






SFP1000-MM-550 SFP 1Gbps Multimode LC Transceiver 500m, 850nm, -20℃ ~ +85℃

SFP1000-MM-2 SFP 1Gbps Multimode LC Transceiver 2km, 1310nm, -40℃ ~ +85℃

SFP1000-SM-10 SFP 1Gbps Singlemode LC Transceiver 10km, 1310nm, -40℃ ~ +85℃






SFP1000-SM-8- SFP 1Gbps Singlemode LC Transceiver 80km, 1550nm, -40℃ ~ +85℃

SFP1000BIDI1-SM-10 SFP 1Gbps Bi-Directional Singlemode LC Transceiver 10km, TX1310 nm, RX1550nm, -40℃ ~ +85℃

SFP1000BID2-SM-10 SFP 1Gbps Bi-Directional Singlemode LC Transceiver 10km, TX1550 nm, RX1310nm, -40℃ ~ +85℃









Accessory List



Notes


Notes

SurveillanceSecurity

Law EnforcementInvestigative

Protective ServicesGovernment Military

DefenseMicrogrid

Military Base NetworksAir-to-Ground

CommunicationsOnboard Networks

IndustrialM2M

Factory AutomationAdvanced Plant Management

Remote Monitoring andDiagnostics

TransportationRail

TransitPort Operations

Intelligent TransportationSystems

UtilityGrid Modernization

Renewable GenerationDistribution and Substation

Automation

iS5 COMMUNICATIONS INC.Phone: 1 (905) 670-0004

Fax: 1 (289) 401-5206Email: [email protected]

www.iS5com.com

#3-7490 Pacific CircleMississauga, Ontario

L5T 2A3Canada

SERVICES ● SUPPORT • SECURITY • SOLUTIONS • SYSTEMS

www.iS5com.com