HR-3 High Speed Rotary Stage

HR-3 Overview

The low-cost HR-3 high speed rotary stages are designed for a variety of applications in research & development, automation, and other industrial areas requiring fast rotation of light payloads. Possible applications include accelerometer and gyro calibration.

The HR-3 uses a high torque direct drive stepper motor. This design eliminates the use worm gears which gives the HR-3 fast speeds, high reliability, and maintenance free operation.

The HR-3 is machined from 6061 aluminum alloy and black anodized.

Features

Low cost

High speeds - up to 2000 PRM

No gears

Maintenance free operation

www.newmarksystems.com | 949-830-0621

HR-3 SeriesHigh Speed Rotary Stage


Dimensions

4.020102.11

3.06077.72

Motor Connector

4.000101.60

3.937100

3.00076.20

2.95375

1.96950

.98425

.98425

1.96950

.98425

.98425

1.96950

1.96950

12X M4X0.7

M6 SOCKET HEAD CAP SCREWCOUNTERBORE FOR 1/4-20 OR

INCH [MM]


Specifications

Motor Wiring


DB-9 Male Description1 Phase A2 Phase A’3 Phase B4 Phase B’5 -6 -7 -8 -9 -

Motor Connection

Amps/Phase 2.8Holding Torque 0.51 NM (72 oz-in)Resistance 0.7 Ohm/PhaseInductance 1.4 mH/PhaseInertia 0.7 oz-in2

1.8° 2-Phase Stepping MotorMotor Specification

HR-3 SpecificationsTravel 360° continuous

Resolution 0.014° @ 25,000 steps/rev motor resolution

Maximum Speed (no load) 12000°/sec (2000 RPM)

Maximum Acceleration (no load) 14400°/sec^2

Maximum Load 1 kg (2.2 lbs)

Holding Torque 0.51 Nm (72 oz-in)

Stage Weight 1.38 kg (3.04 lbs)

Material Aluminum

Finish Black Anodize

Related Products

Compatible Motion Controllers

NSC-1S SeriesSingle Axis

NSC-M SeriesNSC-G SeriesMulit-Axes

Ordering Information

Part Number Description

HR-3 High Speed Rotary Stage Resolution: 0.014° Max Speed: 2000 RPM High Torque Stepper Motor



Technology

HR-3 High Speed Rotary Stage