www.uniguardgps.com

www.uniguardgps.com

Geo-Fencing Alarm (for real time gps vehicle tracking) is to be set via PC support

application and all the setting are specified to the set computer only. It means the setting

will not operate on other computers so that you cannot receive alarm on other computers.

Please login and then check following steps.

Mainly, setting Geo-fencing alarm includes 2 steps.

1. Define Region (one or several)

2. Assign Regions to Vehicle or Assign Vehicles to Region

1. Define Region

A. Login-Realtime Monitor-Define Region

B. After Click Define Region, on the above right corner will show

C. Click on map, the software will auto-form an area with more than 3 clicks.

D. Click to name the area.

www.uniguardgps.com

www.uniguardgps.com

E. You can add not more than 5 areas.

2. Assign Regions to Vehicle-Assign one or more regions to one vehicle

A. Parameter-Set Region Alarm

B. Choose Vehicle ID from the right list

C. Choose Region from the left list, then click Add

D. Save (You must restart PC program after Save Operation.)

www.uniguardgps.com

www.uniguardgps.com

3. Assign Vehicles to Region-assign many vehicles to one region

A.Parameter-Set Region-

B.Choose Vehicle and Choose region

C. SAVE

(You must restart PC program after Save Operation.)

Meanwhile, you can define the region as Enter-in or Leave-out alarm.

www.uniguardgps.com

www.uniguardgps.com

Delete Region

Choose Region-Right Click-Delete

http://www.uniguardgps.com/Support/Faqs/