Embed Size (px)
Citation preview
Motorized Pulleysfor belt conveyors
Summary table
BULK
HAN
DLIN
G
5° ed. MOT BU RULMECA GERMANY EN 01/13
Sea-dredged aggregates working in wet, salty and aggressive environment! IP66/67sealing – a MUST – often with re-greasable seals!
New enlarged productrange
Rulmeca have just launched a productrange, which has been reviewed, enlargedand up-grated to meet customerrequirements.
In this connection, it was necessary to re-name all product descriptions to secure aneasier choice of the right pulley for the right application.
The NEW product range offers threedifferent loading performances:
- L for Light-duty- M for Medium-duty- H/HD for High-duty
In most cases you have a choice.
Therefore, it is important to notice thedifferences to choose the right type of pulley for the right application based onestimated belt tension (radial load) = T1+T2. The actual radial load MUST beLESS than the max. allowable radial loadshown in this catalogue.
Be aware of increased belt tensions usingmulti-ply thick heavy belts and/or larger belt widths.
If you do not find the belt tension needed in the wanted diameter, you might have tochoose a larger one.
The three above loading performancesoffers a product range suitable for any type of application whether workingunder/with
• regular and constant operat ingconditions
• TOUGH and IRREGULAR workingconditions
• irregular and extreme loadings inBRUTAL conditions.
For further information, please open ourweb-site - www.rulmeca.com - or contactyour nearest Rulmeca distributor.
The latest Rulmeca Motorized Pulleycatalogue is available
Recycling application benefiting from IP66/67 sealing systems avoiding internal damagefrom audio or video cassette tapes and aggressive ambient environments containing air orgas of high Ph-values.
Rulmeca Motorized Pulleys: a name with deep rootsThe Rulmeca Motorized Pulleys presented in this catalogue have a long history to tell.It goes back to the 1950’s, when the product was developed in Germany and Denmark.Eventually, through a merging process the German Förder- und Antriebstechnik Aschersleben GmbH and the Danish John KirkegaardMaskinfabrik A/S became partners of the Interroll Group.From the early 1990’s the manufacturing of all Interroll’s BULK Motorized Pulleys were centralised in Aschersleben, Germany.In July 2003 the production facility in Aschersleben, Germany, where Motorized Pulleys have been developed and produced for almosthalf a century, was purchased by Rulli Rulmeca Spa Italy, along with the entire BULK Business Unit.It is from this plant, today renamed RULMECA GERMANY GmbH, that the JOKI tradition for quality and reliability will be continued underthe RULMECA brand.It is thanks to this long history that Rulmeca can be ranked as a very experienced manufacturer of BULK Motorized Pulleys offering theworld largest product range.
Stay with us ! www.rulmeca.com
features and Benefits of Rulmeca Motorized PulleysPurpose-built designThe Rulmeca Motorized Pulley has beenspecifically designed for belt conveyors.
Totally enclosedThe motor, gearbox and bearings are total-ly enclosed and sealed inside a steel shell;therefore they are unlikely to fail due toharmful environmental conditions such aswater, dust, grit chemicals, grease, oil, etc.
Space saving designBecause the drive unit and the bearingsare mounted inside the Motorized Pulleyshell, it takes up much less room than aconventional drive. No need for costlyextras like chains, v-belts, couplings,bearings, support structure and specialguarding.
SafetyThe Rulmeca Motorized Pulley is probablyone of the safest drives available becausethe motor is completely enclosed and theexternal shafts are always stationary. Theonly moving external parts are theMotorized Pulley shell and bearing hous-ings.
Low purchasing and installation costThe Rulmeca Motorized Pulley is quiteoften less expensive than exposed drivesbecause it has fewer parts. Therefore less conveyor design and partspurchasing costs. It is also much quickerand easier to install - certainly less than aquarter of the time taken to fit an exposedsystem.
Low maintenance costThe end user also benefits from the RulmecaMotorized Pulley, because it requires nomaintenance other than the recommendedoil change every 20,000 hours and oil sealchange every 30,000 hours. In other wordsalmost 10 years between oil changes basedon an 8- hour/day working week. Syntheticoil can be specified to extend the servicerange up to 50,000 hours.
EfficiencyThe Rulmeca Motorized Pulley usually hasa much higher efficiency from electricalmotor to shell (Pulley face) than conven-tional drives, because it has fewer frictionallosses, and therefore efficiencies of up to95-97% can be achieved.
CleanlinessBecause the Rulmeca Motorized Pulley ishermetically sealed it cannot contaminateany conveying materials such as food,electrical components, plastics and othermaterials that must be kept perfectly cleanduring handling.
Aesthetic appearanceIf installed correctly the RulmecaMotorized Pulley always looks good. Dueto its compact size and smooth lines, quite often the Motorized Pulley is out ofsight, because it is hidden within the con-veyor frame.
Thermal protectionAll three phase Rulmeca Motorized Pulleysare protected by our thermal protection
switch. This heat sensitive switch is built intothe motor windings to protect the motor fromoverheating. The thermal protector must beconnected to a normally closed circuit.
Weight saving and distributionOften the Rulmeca Motorized Pulley islighter than conventional drives and often it is possible to reduce the cost of the conveyor structure, because the weight isevenly distributed within the conveyorframe.
Variable frequency converterAll Rulmeca Motorized Pulleys with 3 phasemotors are easily controlled by variable frequency converters working in the 15 Hzto 65 Hz frequency range. See TechnicalPrecautions in the catalogue.
Fewer partsA Rulmeca Motorized Pulley consists of theMotorized Pulley and two fixing brackets!Exposed drives can require up to eight ormore separate components, most of whichhave to be purchased from different suppli-ers or custom manufactured.
Low noiseThanks to the totally sealed enclosure andhigh quality gears the Rulmeca MotorizedPulley runs almost at a whisper – a veryimportant fact in today’s modern factoryenvironments.
The Rulmeca Motorized Pulley – the ideal drive unit for conveyors “Fit it and forget it”.
Motorized Pulley138E-500M
The dimension "W" is the distance between the centre of the fixing hole of the bracket to the end of the terminal box.
Motorized Pulley 500H-1000HD
Motorized pulleys or idler pulleys (UT) Compact Larger Straight Elbowterminal box terminal box connector connector≤4.0 kW ≥5.5 kW ≤ 4.0 kW ≤ 4.0 kW
A B C D E F G G H K L M N N1 L M N O U V R S TTS9/11
Type mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
138E 138.5 137 23.5 30 54 20 5 - 16.5 23.5 41 24 95 14 - - - - 3.5 19.5 20 48 12165E 165 163.5 43.5 40 80 30 10 13.5 21.5 41.5 41 24 95 14 - - - - 4 27 20 48 12220M & 220H 216 214.5 43.5 40 100 30 15.5 19.5 21.5 41.5 41 24 95 14 87 27 107 105 4 27 20 48 12320L 323 319 50 40 96 30 15 19.5 25 54 41 24 95 14 - - - - 4 27 20 48 12320M 321 319 50 40 125 30 17.5 22.5 25 54 41 24 95 14 87 27 107 105 4 27 20 48 12320H 321 319 50 50 148 40 11 20.5 25 55 41 24 95 14 - - 107 - 4 27 20 48 12400L 404 400 50 40 125 30 20 22.5 25 54 41 24 95 14 87 27 107 105 4 27 20 48 12400M & 400H 404 400 50 60 194 45 23 - 25 50 - - - - 131 46 - 165 - - - - -500L & 500M 501 497 50 60 194 45 23 - 25 50 - - - - 131 46 - 165 - - - - -
UT138E 138.5 137 23.5 30 54 20 5 - 16.5 -UT165E 165 163.5 43.5 40 80 30 10 13.5 21.5 -UT220M & UT220H 216 214.5 43.5 40 100 30 15.5 22.5 21.5 -UT320M 321 319 50 40 125 30 14.5 22.5 25 -UT320H 321 319 50 50 148 40 11 20.5 25 -UT400L 404 400 50 40 125 30 17 22.5 25 -UT400M & UT400H 404 400 50 60 168 45 20 - 25 -
Motorized pulleys or idler pulleys (UT) Terminal box BracketsType A B C D E G L M O P S W W1 W2 X X1 Z Z1
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
500H upto 22kW 501 497 - 65 192 95 131 46 165 150 23 45 90 60 180 240 80 141500H 22 &30kW 501 497 - 65 192 95 166 54 230 150 23 45 90 60 180 240 80 141630M upto 22kW 630 626 - 65 192 95 131 46 165 150 23 45 90 60 180 240 80 141630M 22 & 30kW 630 626 - 65 192 95 166 54 230 150 23 45 90 60 180 240 80 141630H 630 626 - 90 268 88 166 54 230 150 26 58.5 117 80 250 320 100 183800M 800 796 - 90 268 88 166 54 230 150 26 61 117 80 250 320 100 183800H 800 796 - 120 330 80 206 67 260 150 33 95 160 120 300 370 110 213800HD 800 796 - 120 330 80 206 67 260 150 33 95 160 120 300 370 110 2131000H & HD 1020 1014 - 203 520 145 218 122 325 215 50 228 143 130 560 717 215 412
UT500H 501 497 - 65 235 95 - - - 150 23 45 90 60 180 240 80 141UT630M 630 626 - 90 226 85 - - - 150 26 45 117 80 250 320 100 183UT630H 630 626 - 120 330 75 - - - 150 33 58,5 160 120 300 370 110 213
Motorized Dia- Power Max. radial load Nominal belt speed at full load at 50 Hz (m/sec) Type of Motorized Minimumpulley meter T1+T2 in (N) Pulleys - L, M or H shell width (RL)*
Type (mm) (kW) <1.25m/s 1.25&1.6 m/s 0.04 0.05 0.06 0.08 0.10 0.13 0.16 0.20 0.25 0.32 0.40 0.50 0.63 0.80 1.00 1.25 1.60 Type E
138E 138.5 0.10 4740 E E E - E 300
138E 138.5 0.18 4740 E E E E E 300
138E 138.5 0.24 4740 E E E E E E 300
138E 138.5 0.37 4740 E E E E E E E E E 320
138E 138.5 0.55 4740 4250 E E E E E E E E E 300
138E 138.5 0.75 4740 4250 E E E E E E E E 320
165E 165 0.11 9330 E E E E 400
Type (mm) (kW) <1.25m/s 1.25&1.6 m/s >=2.0m/s 0,13 0,16 0,20 0,25 0,32 0,40 0,50 0,63 0,80 1,00 1,25 1,60 2,00 2,50 3,15 4,00 4,50 Type E
165E 165 0.37 9330 E E E E E E E E E E 350
165E 165 0.75 9330 E E E E E E E E E E E 400
165E 165 1.10 9330 8700 6950 E E E E E E E E E E E 400
165E 165 1.50 9330 8700 6950 E E E E E E E E E 400
Type (mm) (kW) L M H 0,13 0,16 0,20 0,25 0,32 0,40 0,50 0,63 0,80 1,00 1,25 1,60 2,00 2,50 3,15 4,00 4,50 L M H
220M/220H 216 0.37 11500 25000 H H M M M M M M M M M 400 450
220M/220H 216 0.55 11500 25000 H H M M M M M M M M M 450 500
220M/220H 216 0.75 11500 25000 H H M M M M M M M M M 450 500
220H 216 1.10 25000 H H 500
220M/220H 216 1.10 11500 25000 H H M M M M M M M M M 400 450
220M/220H 216 1.50 11500 25000 H H M M M M M M M M M 400 450
220M/220H 216 2.20 11500 25000 H H M M M M M M M M 450 500
220M/220H 216 3.00 11500 25000 H H M M M M M M 500 550
220M/220H 216 4.00 11500 25000 H H M M M M M 500 550
220H 216 5.50 25000 H H H H H H 550
320L 320 0.75 11500 L L L L L L L 450
320L 320 1.10 11500 L L L L L L L 400
320L 320 1.50 11500 L L L L L L L 400
320L 320 2.20 11500 L L L L L L 450
320L 320 3.00 11500 L L L L 500
320L 320 4.00 11500 L L L 500
320M/320H 320 0.75 20000 35000 H M M M M M M M M 500 550
320M/320H 320 1.10 20000 35000 H H M M M M M M M M M 500 550
320M/320H 320 1.50 20000 35000 H H M M M M M M M M 500 550
320M/320H 320 2.20 20000 35000 H H M M M M M M M M M M 500 550
320M/320H 320 3.00 20000 35000 H H H M M M M M M M M 500 550
320M/320H 320 4.00 20000 35000 H H H M M M M M M M 500 550
320M/320H 320 5.50 20000 35000 H H H H M M M M M 500 550
320M/320H 320 7.50 20000 35000 H H H M M M 500 550
400L 400 2.20 20000 L L L L L L 550
400L 400 3.00 20000 L L L L L L 550
400L 400 4.00 20000 L L L L L L 550
400L 400 5.50 20000 L L L L 550
400L 400 7.50 20000 L L L 550
400M/400H 400 2.20 40500 50000 H H H M M M M M M M M 600 650
400M/400H 400 4.00 40500 50000 H H H M M M M M M 600 650
400M/400H 400 5.50 40500 50000 H H H M M M M M M M 600 650
400M/400H 400 7.50 40500 50000 H H H M M M M M M 600 710
400M/400H 400 11.00 40500 50000 H H H M M M M 660 710
400M/400H 400 15.00 40500 50000 H H H M M M 660 710
500L/500M 500 2.20 35000 42200 M M M L L L L L 600 650
500L/500M 500 4.00 35000 42200 M M M L L L L L L 600 650
500L/500M 500 5.50 35000 42200 M M M L L L L L L 600 650
500L/500M 500 7.50 35000 42200 M M M L L L L L 600 710
500L/500M 500 11.00 35000 42200 M M M L L L 660 710
500L/500M 500 15.00 35000 42200 M M M L L 660 710
500H 500 5.50 46000 H H H H H H H H 750
500H 500 7.50 46000 H H H H H H H 750
500H 500 11.00 46000 H H H H H 750
500H 500 15.00 46000 H H H H H 750
500H 500 18.50 46000 H H H H 750
500H 500 22.00 46000 H H H H 750
500H 500 30.00 46000 H H H H H 850
630M 630 5.50 46000 M M M M M M M M 750
630M 630 7.50 46000 M M M M M M M 750
630M 630 11.00 46000 M M M M M 750
630M 630 15.00 46000 M M M M 750
630M 630 18.50 46000 M M M 750
630M 630 22.00 46000 M M M 750
630H 630 22.00 73600 H H H H H H 950
630H 630 30.00 98100 H H H H H 950
630H 630 37.00 98100 H H H H 950
630H 630 45.00 88300 H H H 950
630H 630 55.00 88300 H H H 950
800M 800 22.00 73600 M M M M M 950
800M 800 30.00 98100 M M M M 950
800M 800 37.00 98100 M M M M 950
800M 800 45.00 88300 M M 950
800M 800 55.00 88300 M M 950
800H & HD 800 55.00 200000 200000 HD HD H H H H H H 1150 1300
800H & HD 800 75.00 200000 200000 HD HD H H H H H 1150 1300
800H & HD 800 90.00 200000 200000 HD HD H H H H 1400 1550
800H & HD 800 110.00 200000 180000 HD HD H H H 1400 1550
800H & HD 800 132.00 200000 180000 HD HD H H 1400 1550
Type (mm) (kW) L M H HD 0,80 1,00 1,25 1,60 2,00 2,50 3,00 3,15 3,50 4,00 4,50 5,50 6,50 7,00 7,50 8,50 9,50 L M H HD
1000H 1020 160.00 220000 H H H H H H H H H H 1250
1000HD 1020 160.00 300000 HD HD HD HD HD HD HD 1400
1000H 1020 200.00 220000 H H H H H H H 1300
1000HD 1020 200.00 300000 HD HD HD HD HD HD 1450
1000H 1020 250.00 220000 H H H H H H H 1350
1000HD 1020 250.00 300000 HD HD HD HD HD 1500
* Standard shell width (RL) in 50 mm steps available.
Motorized Dia- Power Max. radial load Nominal belt speed at full load at 50 Hz (m/sec) Type of Motorized Minimumpulley meter T1+T2 in (N) Pulleys - L, M or H shell width (RL)*
Type (mm) (kW) L M H HD 0,13 0,16 0,20 0,25 0,32 0,40 0,50 0,63 0,80 1,00 1,25 1,60 2,00 2,50 3,15 4,00 4,50 L M H HD
Please contact Rulmeca for min. RL in connection with Motorized Pulleys with back stop or electramagnetic brake** Please, state type and thickness for rubber lagging (RUB**)*** Please. state direction of rotation viewed from t-box side (BST***)
Order Type Power Diameter Shell width (RL) Belt speed Rubber Backstop-pulley Voltage Frequencyexample lagged in clockwise
direction(kW) (mm) (mm) (m/sec) (Volts) (Hz)
500H 7.5 500 950 1.25 RUB** BST*** 400/690 50_ x
Mounting brackets
Mounting bracketsType AL - with key
& ALO - without key
I
K
X1
F
D
Z1
ZV
T X T
S W1
Motorized Material Bracket Dimension in mm Weightpulleys description in kgType D F I K S T V W1 X X1 Z Z1
138E Steel KL30 30 20 86 57 11 17 12 24 110 180 44.5 72 0.7
165E & 220H Steel KL41-HD 40 30 84 62 14 20 22 40 110 190 50 83 2.1
320L & 320M Steel KL41-HD 40 30 84 62 14 20 22 40 110 190 50 83 2.1
320H Steel KL42 50 40 121 90 18 30 25 50 150 250 70 110 4.5
400L Steel KL41-HD 40 30 84 62 14 20 22 40 110 190 50 83 2.1
400M & 400H Steel KL60 60 45 130 90 18 30 25 50 150 270 70 115 4.8
500L & 500M Steel KL60 60 45 130 90 18 30 25 50 150 270 70 115 4.8
Motorized Material Bracket Dimension in mm Weightpulleys description in kgType D I S V W W1 W2 X X1 Z Z1
500H Spheroidal cast iron AL65/AL065 65 115 23 34 45 90 60 180 240 80 141 8.0
630M Spheroidal cast iron AL65/AL065 65 115 23 34 45 90 60 180 240 80 141 8.0
630H Cast steel AL90/AL090 90 160 26 42 58.5 117 80 250 320 100 183 19.0
800M Cast steel AL90/AL090 90 160 26 42 58.5 117 80 250 320 100 183 19.0
800H Cast steel AL120/AL0120 120 200 33 50 95 160 120 300 370 110 213 38.0
800HD Cast steel AL121/AL0121 120 200 33 50 95 160 120 300 370 110 213 38.0
1000HD Cast steel AL200 443 50 95 228 143 130 560 717 215 412 164
ALO200 203 458 156
5°
ed.
MO
T B
U R
ULM
EC
A G
ER
MA
NY
EN
01/1
3
EuROPEBELGIuMUVO Technologies bvbaRozenlei 37 - BE - 2540 HovePhone: +32 (0) 3 455 43 22Fax: +32 (0) 3 454 36 70Web: www.uvo.be - email: [email protected]
DENMARKRULMECA A/SLangebjergvænget 19DDK - 4000 RoskildePhone: +45 36 776755Fax: +45 36776855email: [email protected]
fINLANDRULMECA OYTuusantie 1FI - 03100 NummelaPhone: +358 9 2243 5510Fax: +358 9 2243 5100email: [email protected]
fRANcEPRECISMECA Equipements de Manutention15, Rue de la CôteC.S. 90015 - 67701 SAVERNE Cedex Phone: +33 3 88 715800Fax: +33 3 88 912801email: [email protected]
GERMANYRULMECA Germany GmbH Wilslebener Chaussee 12-14DE – 06449 AscherslebenPhone: +49 (0) 3473 956-0Fax: +49 (0) 3473 956-210email: [email protected]: www.rulmeca.com
ITALYRULLI RULMECA S.p.A.Via A. Toscanini, 1IT – 24011 Almé (Bergamo)Phone: +39 035 4300 111Fax: +39 035 545 523email: [email protected]: www.rulmeca.it
NORWAYINTERROLL AS Kobbervikdalen 65NO – 3036 DrammenPhone: +47 32 882600Fax: +47 32 882610email: [email protected]
PORTuGALRULMECA DE PORTUGAL P. Ind. do Tortosendo – Edificio Parkurbis,Loja 7 – Apatardo 113PT – 6200-865 TortosendoPhone: +351 275 330 780Fax: +351 275 330 789email: [email protected]
RuSSIASales Office MoscowLeninski Prospekt 95 ARU – 119313 MoscowPhone: +7 (499) 132 3774Fax: +7 (495) 937 5243email: [email protected]
SPAINRULMECA ESPAÑA S.L.P.I. Urvasa – C/Ripollés, 14ES – 08130 Sta. Perpètua de la MogodaPhone: +34 93 5449199Fax: +34 93 5744424email: [email protected]
SWEDENRULMECA A/SSkaraborgsgatan 29ASE - 532 30 SkaraPhone: +46 (0) 511 160 27Fax: +46 (0) 511 160 29email: [email protected]
TuRKEYRULMECA TASIMA AKSAMLARITICARET LIMITED SIRKETIDekocity AVM - Erler Mah. DumlupınarBulvarı No:348/61TR - 06930 Ümitköy/ANKARAPhone: +90 312 284 64 74Fax: +90 312 284 64 78email: [email protected]
uNITED KINGDOMRULMECA UK Ltd.Brunel Road Earlstrees Ind. EstateGB - Corby, Northants NN17 4UX Phone: +44 1536 748 525Fax: +44 1536 748 535email: [email protected]
NORTH & SOuTH AMERIcABRAZILTECTORAv. Novo Horizonte, 406 Santo André BR - 09060-820 São Paulo Phone: +55 (11) 4428-2888Fax: +55 (11) 4421-9338 email: [email protected]: www.tector.com.br
cANADAPRECISMECA RULMECA GROUP75 Mason Street, CA -Wallaceburg,Ontario,N8A 4L7 Phone: +1 519-627-2277 Fax: +1 519-627-5115email: [email protected]: www.precismeca.ab.ca
PERuBLEXIM S.R.L.Calle las Camelias 710 OF. 501 PE - San Isidro,LimaPhone: +51-1 441-6373Fax: +51-1 421-9384 email: [email protected]: www.blexim.com
uSARULMECA CORPORATION6508 Windmill Way, Suite BUS – 28405 Wilmington, NCPhone: +19 10-794 9294Fax: +19 10-794 9296email: [email protected]: www.rulmecacorp.com
VENEZuELAINDUSTRIAS RULMECA S.A.Zona Industrial Municipal NorteCalle Este Oeste Galpón 67-200VE – Valencia, Edo. CarabodoPhone: +58 241-8336249Fax: +58 241-8321517email: [email protected]: www.rulmeca.com.ve
ASIAcHINARULMECA (TIANJN) CO., LTDD1-2 & D1-4, Saida International IndustrialPark, Xiping Economic Development Area (XEDA)CN – 300385 Tianjin Phone: +86 22 2388 8628Fax: +86 22 2388 9828email: [email protected]
INDIALAKHOTIA ENTERPRISE150, BroadwayIN – 600 0108 ChennaiPhone: +91 44 25226466Fax: +91 44 25247040email: [email protected]: lakhotia.co.in
INDONESIAPT.RULMECA INDONESIARukan Mutiara Taman Palem B5 No.15ID–11730 Cengkareng, Jakarta BaratPhone: +62 21 5435 5608Fax: +62 21 5435 5608email: [email protected]
ISRAELCOMTRANS ENGINEERING Ltd.5 Hahoma Street IL – 75655 Rishon le-Zion Phone: +972 3 961 9636Fax: +972 3 961 9644 email: [email protected]
THAILANDRULMECA THAILAND CO. LTD.41/15 Moo 6, Bangchalong BangpleeTH - 10540 SamutprakarnPhone: +66 2 337 0297Fax: +66 2 337 0302email: [email protected]
AfRIcA & AuSTRALIAEGYPTDATCO Industrial Service CenterOsman Towers Floor 156 EL-SAADA St.,EG - 11341 Cairo Phone: +20-2-24521203Fax: +20-2-24521202email: [email protected]: www.datcoegypt.com
SOuTH AfRIcAMELCO CONVEYOR EQUIPMENT LTD.Cnr. Hertzog & Jack Pienaar StreetGermiston South Ext. 7ZA – 1400 Germiston Phone: +27 87 806 3160Fax: +27 11 825 3592email: [email protected]: www.melcoconveyors.com
AuSTRALIARULMECA MELCO AUSTRALIACorporate HouseBuilding 6 Garden City Office Park2404 Logan Rd Eight Mile PlainsAU – 4113 QueenslandPhone: +61 (0) 467666067email: [email protected]: www.melcoconveyors.com
