Upload
jon-wiggins
View
61
Download
0
Embed Size (px)
Citation preview
2009-2010
Jon Wiggins Top-sport trainer WBV
2009-2010
National trainers Syllabus & vocational qualification
National-trainers syllabus and vocational qualification
Pre-course modules
Physiology Strength training
Coach platform
Pre course Log Book - theory
Core Course
Application of Physiology
Technical knowledge skills
Technical knowledge training methods
PlanningMonitoring and
evaluation
CommunicationGrowth and
development
Safe working practices
Practical coaching track
athlete protection
Post Course
POST COURSE PRACTICE
Physiology Strength training
Coach Platform
Syllabus -
“You are what you train and correct training is governed by the knowledge
and structure of professional coaching” Jon Wiggins 2008”
Pre-course • Physiology
Strength training
Coaching Platform
Core Course Application of Physiology
Technical knowledge skills
Technical knowledge training methods
Planning
Monitoring and evaluation
Communication
Growth and development
Safe working practice
Practical coaching track
Athlete protection
Post Course Physiology
Strength training
Coach platform
Pre-requisite qualification/attitude Be at least 18 years of age at the commencement of the course
Be holder of the A trainer diploma or following a sports science degree course at the University of Leuven.
Able to train/coach groups between 8-20 athletes at high levels of competitive ability
Working on an individual base with athletes.
Commitment and interest in furthering a professional coaching/trainers career
To organize and manage a number of assistants
1. Aims and Assessment Objectives
1.1To equip the candidates with technical knowledge
To apply the mechanical principles and techniques in the performance of the different disciplines of track
racing
To demonstrate an understanding of the correct procedures and conduct at high level competition events
To analyse cycling skills in a competitive environment and to produce long term and short term action plans
to optimise performances
To demonstrate an applied knowledge of anatomy and physiology and its application when training
performers
To understand and apply principles of training at all levels of athletes from club level to world class program.
To understand the value and limitations of strength conditioning
To understand and manage stress
To demonstrate an in depth knowledge of performance times related to all levels of competition
Syllabus
Mechanical principles in the context of:
Male V female
Age and development
Anthropometry
Techniques
Accurate assessment monitoring and comparison to known standards of all competitive track disciplines
Systematic observation and analysis of technique:
Visual analysis of all technique, including use of video and laser technology
Accurate and repeatable methods of recording data
Planning and implementation of action plans to improve technique
Physiology and Anatomy
Physiology – application of physiological principles in cycling training and strength condition in various
environments relating to;
Cardio vascular system
Energy systems
Different training requirements for children and adults
Nutrition
Anatomy
Types of muscle and relating muscle groups to specific cycling skills
Joint Structures, types and movements
Influence of gender and age over a full lifespan
Effect of puberty
Growth stages and related skill capacities
Emotional and social developments
Anthropometry
The training of cyclists from club level to high performance related to recognised principles
Strength conditioning
Mobility, flexibility, endurance, power, strength and speed training Safe and appropriate use of all types of resistance work according to gender and stage of maturation application of recognized training principles to develop a strength program for athletes from club level to a world class program. values and limitations of strength conditioning as a supplement to cycling specific training.
Stress Identification of physiological and psychological stress Management of physiological and psychological stress Performance times and standards relating to national and international competition.
1.2 To equip candidates with the knowledge and skill to conduct safe working practices
To ensure assistants and helpers are aware of the safety requirements and able to implement them
To respond to the causes, signs of and the rehabilitation of common cycling and strength training injuries
To demonstrate an ability to develop strength and cycling training sessions which reduce the risk of
sustaining injury
To understand common medical conditions and their implications for training and competition, reacting to
them accordingly
To understand and apply the safety aspects of strength conditioning
To be aware of protocol related to any type of testing
To understand and appreciate the lifestyle necessary for competitive performances
Syllabus
Collation of all relevant safety information
Knowledge of sources of information
Providing clear and concise guidelines to assistants
Causes and symptoms of common injuries and medical conditions
Safe practices related to basic training principles
Appropriate equipment for land conditioning related to developmental age of the individual
Short and long term actions to be taken in response to injuries and medical conditions
How and where to obtain professional treatment for these injuries, eg; hospital, doctors, physiotherapists
etc...
Safe use of equipment
Awareness of categories of banned substances
Knowledge of procedures with regard to prescribed substances and testing
Guidelines to testing procedures
Communication procedure with regard to prohibited substances and procedures
Lifestyle issues relating to competitive cyclists including, smoking, alcohol, drugs abuse, nutrition, sleep
patterns, exams, work pattern, travel and attendance at competiton.
1.3 To equip candidates with the knowledge and skills to plan, conduct, monitor and evaluate a session
and series of sessions
To establish aims and objectives
To plan performance objectives
To periodic all elements of a cyclists programme
To plan and implement a total programme for a club, group or individual
To plan and implement an individual strength training session appropriate to the level of performer
To organise groups appropriate to the situation
To monitor and evaluate training and competition performances in a variety of different areas, using a
variety of methods
To identify appropriate methods for the collection, storage and retrieval of information
To understand the principles of time management in relation to self and others
Syllabus
Identification of resources related to planning
Aims and objectives for club, groups and individuals in short term and long term
Periodic – competition ( calendar planning) cycling based , strength based, testing and monitoring
programme
Planning of a total programme, foundation and excellence
Planning of a complete programme including individual, varying levels and across the age range
Principles of monitoring and evaluation of, self and others, training sessions, competitive performance
Collection, storage and retrieval methods including information confidentiality and the data protection act.
Principles of time management : self, cyclists, assistants, helpers and parents
1.4 To equip the candidate with a knowledge of relevant aspects of sports psychology and their application
To demonstrate an understanding of the application of the principles of sports psychology
To demonstrate an ability to make use of motivational techniques on an individual and group basis, with all ages of
cyclists.
Syllabus
Principles of sport psychology
Positive self image
Group dynamics
Arousal and anxiety management
Mental preparation for training and competition
Visualisation techniques
Principles of motivation and de-motivation
Goal setting – long and short term
Use of incentives
Presentation of feedback in a way unlikely to undermine performance
1.5To equip candidates with the necessary managerial skills
Organise and manage a cycling development programme
Organise and manage a team prior to and at competition events
Organise and manage a group of cyclists and coaches at a training camp or multi-day competition
Demonstrate effective management to ensure the efficient day to day operation of a cycling development
programme
Syllabus
Organisation of a cycling development programme in a variety of different circumstances
Club programme
School and college programme
Organisation and management of teams
Organisation and management of cyclists and coaches in a variety of different circumstances
Within a club
Training camp
Multi-day competition
2. Methods of assessment
2.1 Practical
Assessment of practical coaching
2.2 Theory
Oral exam
2.3 practical results
Weekly evaluation
Pre-course “Bridging the gap between science and coaching”
PART 1a Physiology
All athletic movements require energy provided by a complex breakdown of foodstuffs within the body. (See krebs cycle) There
are a number of related processes which take place before this movement takes place and can be explained at a microscopic
and sub-cellular level. These processes make up the metabolism (chemical changes) within the human body. The processes
which initiate movement and allow the continuation of movement can be broken down into four discrete areas;
1. Neuromuscular control of movement
2. Muscular contraction
3. The re-synthesis of energy through the three energy systems
4. The activity of the cardio-respiratory system (heart, lungs and circulation) during exercise as a support of the energy
production process.
1. Neuromuscular control of movement.
The human body is able to move by a complex system of muscles and levers. The levers are the bones of the skeleton and form a
rigid frame with which to make definite movements. The muscles are the tissues which can change their lengths, thereby
creating a force to move the levers and allow movement to take place. Despite this ability, the muscles themselves need signals
to determine when to contract and relax, at what force to contact and also which muscles to contract allowing movement in a
certain direction.
This control of skeletal muscles from the central nervous system (c.n.s brain, and spinal column) is described as voluntary. The
human body is consciously aware of the movements being made. Once the brain has decided and initiated the movement, nerve
impulses travel through the spinal cord and through the motor neurons (nerve fibres) to deliver the information for contraction
to the specific muscles. A motor unit contains the motor neuron and the muscle fibres it stimulates. A motor neuron may control
several muscle fibres or several hundred depending on the size of the muscle group and its necessity for sensitivity. When the
stimulus from the neuron is transmitted, the muscle fibres associated in that motor unit will all contract. This is known as the ‘all
or none principle’.
Fig.1a CNS Fig.1b. PNS
Fig.2. Cross section of the lower leg – (fibula)
1. Brain
2. Central nervous system and
Brain
3. Spinal cord
Fig.3. Diagram of motor-neurons and muscle fibre s Fig.4. Deep fibular nerve
Ref. Grm wnr
Fig.5. Decomposition – muscular response to individual motor unit action.
Nerve fibres
Nerve tissues are described as excitable as they react to changes in their electrical potential. Throughout the length of the nerve,
the membrane surrounding it acts as a control point to ensure changes in electrical potential can be made by altering the
content of sodium and potassium ions. When the nerve is stimulated, the action potential is created with a knock on effect,
transmitting the information down the nerve fibre to the connected muscle fibres. Within a muscle, the force of contractions is
regulated by the number of motor units recruited and the rate at which they are stimulated. The combination of these two
factors allows the body to increase the intensity of effort during cycling movements from light to maximal. The selection of the
correct motor units in the correct muscle groups, as well as their stimulation rate, is part of the complex system of the C.N.S
which results in establishing movement patterns within the system. If repeated sufficiently, exact movements can be replicated
time and again under all manners of stresses through an ingraining process in the C.N.S. This is one of the important reasons for
repetitive training on specific disciplines with correct bike positioning optimal for correct functioning of the muscle type.
Motor Units
The ability of a motor unit to be recruited depends on its characteristics of contraction speed. The motor unit acquires its
characteristics from the type of muscle fibres the motor neuron serves. These fibres types and characteristics are represented in
Table 1.
Table1: Classification and characteristics of motor units in human skeletal muscle.
Type of motor unit Metabolic characteristics
Rate of contraction Force created Fatigue rate
TYPE I Oxidative Slow Twitch Small Low
TYPE IIa Oxidative/Glycolytic Fast Twitch Medium Low
TYPE IIb Glycolytic Fast Twitch Large High
Key:
Oxidative = Oxygen is used to metabolise foodstuffs for energy production.
Glycolytic = Glycogen is the sole fuel for metabolism, therefore anaerobic (without oxygen).
Table 1: Characteristics of the Three Muscle Fibre Types
Fiber Type Slow Twitch (ST) Fast Twitch A (FT-A) Fast Twitch B (FT-B)
Contraction time Slow Fast Very fast
Size of motor neuron Small Large Very large
Resistance to fatigue High Intermediate Low
Activity used for Aerobic Long term anaerobic Short term anaerobic
Force production Low High Very high
Mitochondrial density High High Low
Capillary density High Intermediate Low
Oxidative capacity High High Low
Glycolytic capacity Low High High
Major storage fuel Triglycerides CP, Glycogen CP, Glycogen
This information is critical for understanding cyclist’s performances; namely that sprinters should possess a greater proportion
of TYPEIIb muscle fibres in order to facilitate work at high speeds in the shorter distances but can equally be crucial in winning
high speed sprints at end of long races (The all round track rider potential). However time-trialists and climbers should possess a
greater proportion of TYPEI fibres in order to facilitate success in the longer demanding distance events or long climbs with
challenging percentages through their better resistance of fatigue.
This is something that we will cover later extensively to discover the right athlete abilities through a sound talent scout program.
Fibre recruitment
One of the most important factors regarding the recruitment of the three tupes of muscle fibres involves the intensity of the
exercise. If the cycling intensity is light and predominantly aerobic, TYPEI fibres will be recruited. As the intensity increases above
the anaerobic threshold (transition from predominantly light to predominantly heavy exercises), TYPE IIa fibres are recruited. If
the cycling speed increases further and intensity approaches high sprinting levels. TYPE IIb fibres will be recruited. This
additional recruitment will lead to a faster fatigue rate which is associated with the contraction of TYPE IIb fibres
Determining fibre type
Since the only way to directly determine the fibre-type composition in an athlete is to perform an invasive muscle biopsy test
(in which a needle is stuck into the muscle and a few fibers are plucked out to be examined under a microscope), some studies have tried to indirectly estimate the fiber-type composition within muscle groups of an individual by testing for a relationship between the different properties of fiber type and muscle fiber composition. This type of research has yielded promising results, with significant relationships being found between the proportion of FT fibers and muscular strength or power (Coyle, et al., 1979; Froese & Houston, 1985; Gerdle, et al., 1988; Gregor, et al., 1979; Suter, et al., 1993). An indirect method that can be used in the weight room to determine the fiber composition of a muscle Group is to initially establish the 1RM (the greatest weight that they can lift just once) of your athletes. Then have them perform as many repetitions at 80% of 1RM as they can. If they do fewer than seven repetitions, then the muscle group is likely composed of more than 50% FT fibers. If they can perform 12 or more repetitions, then the muscle group has more than 50% ST fibers. If the athlete can do between 7 and 12 repetitions, then the muscle group probably has an equal proportion of fibers (Pipes, 1994). Because lifting weights requires the use of many muscles at once, this method does not work for individual muscles, just muscle groups. In order to determine the fiber-type composition of an individual muscle, a needle biopsy of the muscle of interest must be performed. Another indirect method that the coach can use, especially when the athletes are young or new to the sport, is to have the athletes try a number of different events. Their dominant fiber type will soon become evident based on their success in certain events, and this discovery can lead to more directed future training for each athlete. Implications for training
Your athletes' fiber type proportion will play a major role in the amount of weight that they can lift, the number of repetitions
that they can complete in a set or interval workout, and the desired outcome (increased muscular strength/power or endurance). For example, an athlete with a greater proportion of fast- twitch fibers will not be able to complete as many repetitions at a given relative amount of weight as will an athlete with a greater proportion of slow-twitch fibers and therefore will never attain as high a level of muscular endurance as will the ST -fibered athlete. Similarly, an athlete with a greater proportion of ST fibers will not be able to lift as heavy a weight or run intervals as fast as will an athlete with a greater proportion of FT fibers and therefore will never be as strong or powerful as will the FT - fibered athlete. It is important to remember that, even within the group of sprinters or distance athletes on your team, there will still be a disparity in the fiber types. Not all the sprinters will have the same percentage of FT fibers, nor will all the distance runners have the same percentage of ST fibers. Therefore, some sprinters may be able to complete 10x2000 meters in a workout while others are fatigued after 6 repetitions. Likewise, some distance athletes may be able to complete 8x5000 meters, while others may fatigue after 5 repetitions. Depending on each particular athlete, the coach should decide whether those who fatigue sooner (because of more FT fibers) should be given longer rest periods between intervals in order to complete the workout, or should run fewer repetitions at a faster speed. Training a FT -fibered muscle for endurance will not increase the number of ST fibers, nor will training a ST-fibered muscle for strength and power increase the number of FT fibers. With the proper training, FT -B fibers can take on some of the endurance characteristics of FT -A fibers and FT -A fibers can take on some of the strength and power qualities of FT-B fibers. However, there is no inter-conversion of fibers. FT fibers cannot become ST fibers, or vice versa. What an athlete is born with is what he or she must live with. Although the type of fiber cannot be changed from one to another, training can change the amount of area taken up by the fiber type in the muscle. In other words, there can be a selective hypertrophy of fibers based on the type of training. For example, an athlete may have a 50/50 mix of FT/ST fibers in a muscle, but since FT fibers normally Have a larger cross-sectional area than ST fibers, 65% of that muscle's area may be FT and 35% may be ST. Following a strength training program for improvement in muscular strength, the number of FT and ST fibers will remain the same (still 50/50), however the cross-sectional area will change. This happens because the ST fibers will atrophy (get smaller) while the FT fibers will hypertrophy (get larger). Depending on the specific intensity used in training, the muscle may change to a 75% FT area and a 25% ST area. The change in area will lead to greater strength but decreased en- durance capabilities. In addition, since the mass of FT fibers are greater than that of ST fibers, the athlete will gain mass, as measured by the circumference of the muscle.
Conversely, if the athlete trains for muscular endurance, the FT fibers will atrophy while the ST fibers hypertrophy, causing a greater area of ST fibers. The area of the muscle, which began at 65% FT and 35% ST before training, may change to 50% FT and 50% ST following training, The endurance capabilities of the muscle will increase while its strength will decrease, and the athlete will lose some muscle mass, again be- cause ST fibers are lower in mass than FT fibers. The decrease in mass may be observed by a smaller circumference of the muscle. Many coaches know that, for gains in muscular strength, one should train with heavy weights and few repetitions. This training regimen works because using heavy weights recruits the FT -B fibers, which are capable of producing a greater force than the ST or FT -A fibers. Hypertrophy will only occur in those muscle fibers that are overloaded, so the FT - B fibers must be recruited during training in order to be hypertrophied (Morehouse & Miller, 1976). Training with a low or moderate intensity will not necessitate the recruitment of the FT -B muscle fibers. Therefore, the training intensity must, be high. But how heavy a weight and how many repetitions should you use? Muscular strength is primarily developed when an 8-12repetition maximum (8RM, the maximum amount of weight that can be lifted eight times) or less is used in a set. When the aim of training is to increase the neuro- muscular component of maximum strength, at least 95% of the athlete's 1RM and 1 to 3 repetitions should be used. When the aim is to increase maximum strength by stimulating muscle hypertrophy, at least 80% of 1RM should be lifted 5 to 8 times or until failure (Zatsiorsky, 1995). This latter recommendation assumes that the focus of training is hypertrophy for strength, rather than hypertrophy simply for muscle size. If the aim of training is to increase muscle size (hypertrophy) with moderate gains in strength, then 6 to 12 repetitions should be used (Fleck & Kraemer, 1996). Remember, in order to improve muscular strength, FT -B fibers must be recruited. For maximum results, train your athletes according to their genetic predisposition. For example, an athlete with a greater proportion of slow- twitch fibers would adapt better to cycling more weekly km’s and a muscular endurance program, using more repetitions of a lighter weight. Likewise, an athlete with a greater proportion of fast-twitch fibers would benefit more from sprint training and a muscular strength program, using fewer repetitions of a heavier weight. Ie; track riders
2. Muscular Contraction.
In each muscle of the body there are thousands of individual muscle fibers. The muscles and its fibres are contained in a
protective casing called connective tissue. Within each muscle fibre are many myofibrils. These contain the protein filaments
(actin and myosin) which are responsible for the shortening of the muscle and therefore these result in movement.
When a motor unit has been recruited the excitation caused by the neuron is transferred deep within the muscle fibres and in
the presence of energy, causes cross-bridges to develop between the protein filaments. These filaments then slide across each
other thus shortening the width of each section. This minute change in the ultra-structure of the muscle is insignificant at the
individual myofibril level, but as one of many tens of thousands, contributes to the overall muscle contraction and therefore
movement.
Although muscle fibres have been stimulated electrically, they need energy in order to create the movement of the protein
filaments. This is provided in the human body by the breakdown of a high energy compound called adenosine tri-phosphate
(ATP). It is the splitting of the phosphate bonds within this compound that provides the energy for muscular contraction.
Muscular contraction and training
Physiological changes within the muscle after training can be seen in both the tissue and itself and also the nervous control of
the muscles. Training studies have discovered significant increases in protein within the myofibrils (particularly myosin), as well
as overall increases in size and number of myofibrils within each muscle fibre. This muscle fibre size increases in termed
hypertrophy, and is usually associated with strength training. In order to accommodate this increase in muscle fibre size
increases in the quality and strength of the connective tissues have also been observed. Training adaptations in the neural
system include more efficient muscle fibre recruitment, allowing more economical movement through better co-ordination and
also better contraction rates reducing any excess contractile force.
Correct cycling movements therefore should be repeated regularly and emphasizes the importance of training tools such as SRM
and Power-cranks. The training speeds are also crucial in determining correct adaptations. Fitness or gym work has an upmost
importance to mimic the same movements and speeds as those on the bike in a race situation. So we are indicating a trend
towards adaptation in speed and accuracy.
3. Re-synthesis of energy through the three energy systems
Adenosine tri-phosphate (ATP) breakdown provides the human body with the energy required for muscular contraction.
However, there is only enough of this compound stored in the body to allow exercise to last for only two or three seconds. The
ATP which has been broken down to adenosine di-phosphate (ADP) or adenosine mono-phosphate under extreme exercise
stress, needs to be replaced or built up to its original form so that energy expenditure can continue. The body has three
mechanisms for regenerating the ATP compound.
a) Phosphocreatine (PC) which is stored in the muscular cells broken down providing the missing phosphate band to
reconvert ADP to ATP.
b) Glycogen or glucose (simple carbohydrates) is broken down incompletely without oxygen (anaerobically) through
twelve enzyme linked reactions, with the subsequent formation of lactic acid.
c) Carbohydrates, fat or protein in the presence of oxygen (aerobically) is broken down completely through a series of
complex biochemical, enzyme-aided pathways to carbon dioxide and water.
Figure6. Schematic representation of the three energy systems and their characteristics.
Anaerobic
(without O2)
ATP - PC Lactacid Aerobic
Alactic
(without lactate
build up)
Glycolysis
(breakdown of
glycogen)
Oxygen
availability
?
NO YES
Lactic
acid
O2 and
CO2
FAT + protein
metabolism
(with O2)
There are several important points to be considered for the athlete regarding both training and competition .With respect to
those energy replacement systems. The athlete time continuum and the intensity of the cycling effort will be effected by the
speed of energy replacement requirement, the type of energy store available and the quantity of that store .Table 2. Describes
the characteristics of each store:
Table2.Characteristics of the three energy systems.
System Fuel used Chemical reactions
required
Speed of
replacement
Quantity of store
ATP -PC Phosphocreatine One simple
reaction, within
muscle cells
VERY FAST VERY small
(<10secs)
Lactacid Glycogen Twelve enzyme
reactions, within
muscle cells
FAST Medium (approx
1hour)
Aerobic Glycogen
FAT/Protein
Complex set of
enzyme aided
reactions. Transfer
of oxygen from air-
lungs-circulation-
muscles
SLOW
SLOWEST
Medium (approx
2hours)
LARGE (weeks)
From a cyclists point of view, the intensities and duration of the effort are vital be it on the track or the road. If the energy is
required immediately and at a fast rate as in the 200m sprint, the ATP-CP system will provide the majority of the energy
required, backed up towards the end by the lactacid system (or anaerobic glycolysis) If the energy is required at a slower rate
over a longer period of time as in endurance training sets, the desired energy source would be through aerobic metabolism
which is non-fatiguing. If a high percentage of fat was burnt as fuel, a sparing effect of glycogen could be achieved. In both
instances, the body would still be able to produce a sprint or a series of sprints after the set not having depleted its fast rate
energy stores.
Duration
4. The activity of the cardio-respiratory system. Heart, lungs and circulation during exercises as a support for the energy
production process.
The cardio (heart and vascular) –respiratory (gas exchange) system is the oxygen transfer mechanism which supports aerobic
metabolism. The system transports oxygen-rich blood from the lungs for use by the working muscles and delivers carbon dioxide
– rich blood from the working muscles for exhalation at the lungs. During exercise many metabolic changes take place within
this system to satisfy the increase in energy demand. At the onset of exercise, receptors in the muscles joints, tendons, arteries,
lungs and brain detect chemical, sensory, metabolic and mechanical changes within the body. As a result, ventilation rate and
depth as well as heart rate and heart rate contraction force increase. Blood vessels to the working muscles and skin dilate to
Aerobic system Lactacid system
AT
P-
PC syste
m
Speed REST
allow greater oxygen transport, and aid the thermo-regulation of the body respectively. The great extent to which changes in
the system accommodate the increased demand for energy can be seen in Table 3.
Table3. Example values of selected cardio-respiratory functions at rest and during exercise for top-sport athletes.
Cardio – Respiratory function At rest During exercise
Heart Rate (BPM) 30-55 120-200
Stroke volume (amount of blood
pumped by the heart per/ beat
60-80 millilitres 120-180 millilitres
Cardiac output (amount of blood
pumped by the heart per/minute
4-5 litres 20-30 litres
Ventilation (amount of air
breathed per/minute
8-12 litres 120-180 litres
The body makes these acute changes under exercise conditions, but also makes longer term adaptations to these stresses. It is
these adaptations that we hope to enhance through endurance training.
Cardio-respiratory changes induced by training
Cardiac output can be improved significantly through endurance training. This measure is a function stroke volume and heart
rate. Heart rate at maximum work rates will not change significantly, although it decreases at given sub-maximal intensities. The
increase in cardiac output after a training programme is due to the improvement in stroke volume. There are two reasons for
this:
1. The heart is a muscle, increases in size and develops a more powerful contraction enabling it to force out more blood
per beat
2. The heart improves its ability to re-fill its chambers more fully after each contraction. If it can contract with a greater
quality of blood to start with, the blood pumped out of the heart will also be greater. This situation relies on improved
venous return. After training, the body is able to improve venous return as the working muscles which surround the
blood vessels are stronger and better prepared to squeeze the blood vessels on contraction. Thereby helping to pump
the blood back to the heart.
Training over a period of time will also enhance the respiratory functions. Ventilation per/minute will be improved
through an increase in lung volume and also through an increase in breathing frequency. The diffusion capacity will
also be improved, as will the working muscles ability to extract the oxygen from the blood vessels.
The magnitudes of changes in maximal oxygen uptake (vo2max – maximal amount of oxygen that can be consumed by
the body) have been measured at between 5 and 20% over 8 to 12 weeks of endurance based training. These values
were obtained from active individuals and not competitive athletes. Although current athlete studies from world class
potential junior athletes are proving these studies to be accurate. During this course there will be several studies to
determine more accurate results.
Peripheral changes
It was stated earlier that if the intensity of exercise is too high, glycogen will be broken down anaerobically to lactic acid. If
oxygen is available pyruvate (the penultimate step in anaerobic glycolysis) will enter the Krebs cycle and electron transport
system and be broken down through hundreds of reactions to O2 and CO2. The structures responsible for this process are called
mitochondria and are contained within the muscle fibres. Endurance training has found to increase the size and number of
mitochondria enabling a greater oxidation of glycogen. The quantity of glycogen and aerobic enzymes stored in the muscles
increases and there is a greater muscle capillarisation after training. In addition, the body is able to use proportionally more fat
as a fuel, there by conserving valuable muscle glycogen stores. This is particularly important when considering weight loss and
nutritional needs for competitive cyclists.
Measurement of the cardio-respiratory system.
The adaptations discussed will all contribute to the bodies improved ability to transfer oxygen from air to the working muscles.
This can be measured by calculating oxygen uptake through gas samples. The maximal amount of oxygen a cyclist can transfer to
his working muscles per minute (vo2max) will be an accurate measure of his cardio-respiratory ability. As a strong linear
relationship exists between oxygen uptake and heart rate, measurements of pulse beats during training has proved a popular
method for the assessment of intensity during cycling sets.
Traditionally, maximal oxygen uptake has been used as the best measure for the assessment of aerobic capacity and the
prediction of success in endurance races. Although it is still a valuable indicator, more recent studies and studies that will be
covered extensively in this course have found stronger relationships between endurance ability and abilities to cycle speeds at a
high percentage of their maximum oxygen uptake. As gas analysis measurements are awkward and cumbersome other methods
of the assessment of this intensity have been sought. The relationship between various blood lactate indices, watts/cadence and
cycling speeds is now one of the most commonly used, in conjunction with appropriately designed field tests. These tests are a
large proportion of the course and will be seen both theoretically as practically.
CORE COURSE PART 2 Applied physiology to cycling
Planning for improvement in physical and physiological aspects of human performance is based on three main considerations:
1. Identifying the physiological aspects which contribute to performance in cycling disciplines
2. Deciding how important each component is to particular cycling events
3. Application of the stress-adaptation model of physical development in training for improvement in physiological
components.
Physiological aspects
The main aspects which contribute to road cycling and track cycling performances are considered in table 1(p.12). It is important
however to be aware that as a contribution to cycling performance, the technique and technical aspects are of equal importance
to the physiological aspects and that there is a close relationship between them. For instance, should we consider a hard
endurance set with poor technique good? Development of the physiological capacities should always be done in conjunction
with good cycling technique. So the process is started with bike positioning –bike fitting and further developed to realising both
physiological adaptations as technical. The correct technique and positioning will ensure that the physical development that
takes place will be truly specific.
Race specific cycling endurance
The ability of the muscles to withstand fatigue under race conditions i.e.: using a particular cadence and technique over the
chosen distance at race intensity. This will be specific to the individual and variable across disciplines.
Basic cycling endurance
The ability of the muscles to withstand fatigue in cycling endurance exercises; e.g. maintaining the fastest possible pace during
an interval or continuous effort set of approximately 30minutes.
Cycling speed endurance
The ability of the muscles to withstand fatigue at high intensities. It is linked to the tolerance of lactic acid.
Chapter 1:
Competitive cycling performance
Fig.5. Characteristics of competitive cycling performance.
Explanation of fig.5.
Cycling strength endurance
The ability of a cyclist to withstand fatigue when contracting the muscles with a greater force than normally
expected in racing. Examples of such circumstances would be increasing the gearing during high intensity cycling
sets, or climbing efforts for example using power-cranks. (developing neuro-muscular and correction in technique
efficiency).
Competitive cycling performance
Ability to perform good
technique, starts, pursuit Race specific cycling
endurance
Basic cycling endurance
Cycling speed endurance
Cycling strength endurance
Cycling maximum strength
Cycling general endurance
Basic Cycling speed
Cycling
speed
strength
Cycling pure speed
Feeling Movement
economy
Flexibility Coordination
General endurance
The ability of the muscles to withstand fatigue in any exercise mode. This may be linked very closely to genetic
endowment and % muscle fibre type.
Speed strength
The combination of speed and strength, often described as power. This is the ability of the muscle to contract with a
high force over a short period of time.
Maximum strength
The maximal force created in one voluntary muscular contraction. This will depend on the % fast twitch fibres in the
muscles and also the total muscle mass. And of course importantly the neuro-muscular stimulation developed to
realise the contraction process of the muscle mass in its correct function.
Pure speed
The maximal speed that can be achieved by limb movement. This will be influenced by % fast twitch fibres in the
muscles and also the ability of the body to recruit these fibres in the correct order: co-ordination.
Figure 6. The relationship between force and velocity in muscular contraction.
FORCE
Velocity
The force – velocity of muscular contraction shows that when the resistance is to be overcome (therefore muscular force created) is high, the speed of movement is low. Conversely, if the resistance is low, muscular contraction can take place at near maximum velocity. In all cycling movement, the force needed to over come the wind and surface resistance and the speed of the movement are around the mid-range of this curve. This is where the importance of testing for the athlete’s individual optimal cadence and gearing plays a massive role in both time -trial and track cycling. Consequently, training for performance improvement must involve aspects of both strength and speed development and also the combination of the two, POWER. The object of any training programme relating to strength or power development should be to s hift the curve upwards and to the right in the middle of the range of the curve concerned with competitive cyclist’s performance. This can be seen by the direction of the arrow in Fig.6
Chapter 2:
The importance of physiological factors.
The size of the boxes gives a general guide as to the importance of each component. This will vary between
individuals and events. It is also important to remember the other components of physical fitness, namely body
composition and flexibility. The contribution of these elements are more difficult to quantify, but should be
considered as pre-requisites for the ability to train the other physiological capacities of the body.
Table 4.
Percentage of Energy system suggestions : Track Competiton
The percentage of each energy system used in competitive events is shown above. It is important to remember that
the best guide in exercise prescription is not the distance, but the fraction of the exercise performed. For example,
an Olympic cyclist may cycle twice the distance of a young cyclist in the same time. The other main determinant of
the energy contribution is intensity. This will be discussed in more detail later.
One of the confusing factors in planning the training programme for success in the above events involves the
difference between the energy contribution in the race and the relevant amount of time spent on developing the
systems. For instance, despite only contributing 10 and 50% in 200m and 500m events respectively, the relative time
spent on developing the aerobic system will be disproportionately high. The reasons for this include:
Endurance training involves high volumes of high duration work to train the system.
Event Duration ATP-PC Lactacid Aerobic CHO Aerobic FATS
200m :9secs-12secs 90% 8% 2% <1%
500m :30secs-
:38secs
75% 20% 5% <1%
1km :59secs-
1:05mins
25% 65% 10% <1%
3000m 3:18-
3:30mins
5% 37% 55% 3%
4000m 3:55-4:30mins 4% 25% 65% 6%
50km points
race
52-55mins 2% 15% 75% 8%
Better endurance enhances recovery:
a) This allows more quality anaerobic training to be performed (i.e. a greater number of repetitions,
shorter recovery time, more frequently in the weekly cycle, and should allow a longer taper period if
required for adequate adaptation).
b) In competition – an enhanced speed of recovery can be crucial if the cyclist has several events in a
session, or even heats and finals.
The trainability of the aerobic system is greater on the bike? This is not necessarily to say that the anaerobic
system cannot be trained to a high degree when combined with weight training.
The importance of cycling high volume km for technical reasons is also relevant. It is important once a cyclist
has learnt a particular skill it is of up mount importance to practice and develop the skill, but also to
condition it. This is best done initially at low intensities over extended periods of work (i.e. using the
endurance energy system). These movements then need to be practiced at progressively higher intensities
(and speeds) and then transferred to the race conditions. The endurance mode is often the best to cover the
majority of this conditioning process due to the reduction in stress which allows more movements to be
made without the detrimental effects of fatigue.
Fig.7. The effect of cycling at higher intensities over extended periods of technique.
The relationship between the curves shows that when the intensity of cycling rises above threshold value (usually between 3 and 5mml lactate) for an extended period of time, the individuals optimal cadence will slightly decrease and the gearing will be relevant to the optimal power-output possible in relation to the energy system. This is an indication that the level of muscle fatigue is affecting the body’s ability to perform the correct technical mechanics.
Velocity
Gear
Cadence
Lactate
mml
Threshold
This is why it is stressed that the majority of technical development and conditioning work is performed at or below this threshold value. However technique is also stressed under high intensities fractions under alactic efforts. The reasons described above give us reason to construct a programme with an endurance bias, but the principle of specificity is still extremely valid. The application of this principle in cycling i nvolves setting strict aims and objectives in the development of a particular energy system. When constructing appropriate schedules, we must apply the guidelines which apply specificity to developing that particular system. The balance of training will change for different cyclists for a number of reasons including event specific demands. The guidelines for set construction in training will be covered in more detail. With some of the points previously stated, we can recommend an approximate balance of training for each energy system.
Chapter 3. Stress and Adaptation Stress or loading is best described in competitive sport as the training process. This is the fundamental process which underpins the other training principles, namely overload, progression, specificity and reversibility. The fact that we can stress or overload the body’s physiological systems and allowing subsequent recovery observe improvement in their capacity give us the mechanisms for improvement in performance through physical training. A schematic representation of this process is shown below in Fig8.
4
0 0
1 2 3
0 = present status of physical condition (homeostasis)
1 = Fatigue through stress, e.g. from a training
2 = Recovery after training: rest, eating, sleep
3 =Period of adaptation and super compensation
4 =Point of optimal adaptation and super compensation
Fig.8. Supercompensation
(0) Is the baseline point for physical function at a given time (homeostasis). If we stress or overload the system through
training (1), we cause fatigue from a build up of waist products, a reduction in energy stores or a combination of the
two. Once the training session is complete, we recover back to our baseline level after a period of rest and
replenishment of energy stores (2). The body will then adjust its function to cope with a similar amount of stress more
effectively in future, resulting in an improvement of the baseline homeostasis. This adaptation or super compensation
is the improvement sought after a period or periods of training (3). The ideal outcome of every programme would be to
achieve the max height or improvement in point (4) after each training session or training cycle. This is the most
important aspect of construction of the physical training programme. It is unlikely that anyone will achieve the perfect
adaptation for all athletes all of the time. However with the knowledge of sound scientific principles and experience in
this decision making process, coaches can get close to achieving an optimal improvement in physical condition for most
athletes, most of the time. To get the best results, the coach must decide how to balance types of training, volume and
intensity, rest and recovery and possibly most critically, the timing of all these aspects.
The time scale involved in the stress-adaptation process can be considered in terms of a single session, a week, a training cycle
or the whole season. For example, it may be that over the course of a week, adequate recovery may not be achieved between
sessions. This may be acceptable as long as the coach is aware that this is the effect the training is having. It maybe that by
resting between Saturday lunchtime and Monday evening at the end of the week and the start of the next, the cyclists body can
recover fully in order to start the new week.
The stress and adaptation process is closely related and follow certain rules which are bound by the principles of training:
overload, progression, specificity and reversibility. The details of these rules are illustrated in the following points:
(1) Intensity and duration of training need to be appropriate to the type of physiological development targeted and the
current performance capacity of the cyclist. This is best described as overloading the system. Too little volume or
intensity will not stress the system sufficiently and fail to provide improvement.
(2) The closer to an ideal training volume and intensity for a particular cyclist, the closer the improvements will be to an
optimal level, and vice versa.
(3) If training volume and intensity are continuously too high without adequate recover, the cyclist may fail adaptation and
continue to fatigue with a decrement in performance. This may result in some degree of overtraining syndrome.
(4) Recovery and regeneration are as important as the loading process itself, and should be considered as a unit. The
recovery process can be enhanced by strategic placing of low intensity cycling (to decrease the amount of waste
products). Correct nutritional practices to replace energy stores and enough sleep to enhance both processes.
(5) The experienced cyclist with a strong training background will take longer to adapt and improve than the young,
inexperienced cyclist. Quite often realised with young athletes are rapid fitness improvements resulting in large
increases in performance, whereas a mature athlete may take a year to produce small physical changes which result in
a life time performance. Improvements will decline as the body approaches a genetically pre-determined maximum. It
is very important to consider age and maturity when considering the length and number of training cycles in a yearly
programme but also in the multi-year planning.
(6) Training (or applying stress) must be progressive. The body will adapt to stress by being able to cope with it more
effectively. To achieve the same amount of stress in subsequent sessions, loading must increase accordingly. Increasing
the load may involve training distance, number of repetitions, reduction in rest, increasing resistance, but most
frequently should be seen in an increase in cycling speed.
(7) Timing of successive training sessions is critical to the adaptation process. Too early and the swimmer will not have
recovered sufficiently; too late and the effects of the previous training session will have been lost. The decline in
training benefit after an extended break is often referred to as de-training, where any improvements gained return to
the pre-training state. This is usually proportional to the rate of training gain and hence the concept of reversibility.
(8) Specificity of the training has to be observed; not simply the mode of exercise, but also the type of training. The
intensity and duration ( VOLUME) of the load and the amount of rest must accurately meet the requirements of
physical training and be appropriate to the current status of the performer.
Chapter 4:
4.1. Energy zones in cycling:
The length of the cycles will differ between cyclists, but generally, young cyclists should have shorter cycles. Their
development should focus towards technique/skills and aerobic conditioning interspersed with appropriate competitive
experience. They will also need the motivation of more regular changes in the program and shorter term outcomes to
maintain interest and enthusiasm. Four week cycles for cyclists between 15/17 should be adequate.
When considering the base line point 0, it is important to remember that we can consider the diagram and the effects on
the body in relation to one physiological aspect or several; even the whole physical state of the cyclist’s body. This illustrates
the complex interaction of training aspects and their relationship with physiological functions. The coach should always be
aware of all the physiological aspects when developing one in particular. For instance, during a high volume, high intensity
endurance stage, what is the effect of the training on anaerobic capacity or strength?
Fig9. Illustrates how we can accurately measure the adaptation in training energy in the form of watts. This we will cover
extensively later.
4.2.Why Are Energy Zones Important For cyclists?
The importance of energy zones in cycling is based on the existence of several different pathways to recycle energy in the muscle cells during exercise. The main pathways of energy recycling are non-aerobic metabolism (creatine phosphate), anaerobic metabolism (anaerobic glycolysis), and aerobic metabolism. Metabolism is the process of storing and releasing the energy. Energy for the body is stored in different forms and pathways are used to convert these forms into accessible energy that an athlete can use to perform work. There are no "borders" to energy pathways in a body. At any given time, several pathways, not just one, may be engaged in energy production but dominance of an energy source depends on the duration and intensity of the exercise. Usually workload is broken into several energy "zones" based on the duration and intensity of the training. Energy "zones" allow athletes and coaches to develop a specific pathway of energy recycling and to quantify, track, and plan the physiological adaptations desired for their specific event.
There are several reasons for understanding energy zones in cycling:
1. Track and road cycling sets of different duration and intensity are supported by energy from different sources. During high intensity short-term cycling bouts, most energy is recycled through the anaerobic pathway. It is a fast and non-
oxidative way for energy recycling. During low intensity long-term cycling bouts the energy is recycled mostly aerobically using oxygen. This way is slow but more efficient than the anaerobic way.
2. Improvement of one energy system does not influence another one. When athlete’s cycle long distances they develop mostly aerobic energy sources. High intensity cycling develops the anaerobic energy sources. Different cycling events require the training of different energy pathways.
3. The same cycling set can be ridden in different energy zones. For example, cyclist’s can ride sets with higher or lower intensities. This will recruit different pathways of energy recycling.
4. The preparation of competitive cyclist’s requires evaluation of individual cycling intensities in each energy zone. The same cycling intensity or even heart rate affects the energy recycling pathways differently when athletes are at different stages of the season (i.e., detrained or at peak performances). Adaptation in athletes to the same cycling intensity depends on their current condition, types of muscle fibres, training history, and other factors. Therefore it is important to test athletes during a season and select appropriate cycling intensities (watts) to train different energy zones.
4.3.Energy Forms in the Body
Adenosine Triphosphate (ATP) is the only source of potential chemical energy in the body. It consists of one molecule of protein (adenosine) and three molecules of phosphate. Muscle cells always contain free ATP, which reduces to ADP (adenosine- diphosphate) and releases the energy during the first few seconds of work (figure 1). Decomposition of ATP into ADP releases the energy and phosphoric acid, which increases the acid environment in the muscles. Then other energy storage forms are used to recycle ADP back to ATP through different pathways.
Energy forms in the body include:
Adenosine Triphosphate (ATP) Creatine Phosphate (CP) Glycogen (glucose) Fats Proteins
Working capacity in athletes depends more on the rate of recycling ATP (from CP, glycogen, fats and proteins) than on the amount of ATP. With training, ATP-CP increases less than 20%, while working capacity (cycling velocity) increases more dramatically.
Fig.10.
4.4. Pathways of Energy Metabolism
There are three main pathways of energy metabolism:
1. Creatine Phosphate (immediate non-oxidative way of energy recycling) 2. Anaerobic Metabolism (anaerobic-glycolitic non-oxidative way of energy recycling) 3. Aerobic Metabolism (oxidative way of energy recycling)
Metabolism of Creatine Phosphate is the process of recycling ATP from CP. CP is stored in muscle cells. It very rapidly recycles ATP from ADP. Usually after 2-3 seconds of high intensity work, free ATP stores in muscle cells are depleted. Then CP phosphate is involved to recycle ATP. After 10-15 seconds of high intensity work the rate of recycling ATP from CP is slowed down. Creatine Phosphate has very high power, low capacity, and low efficiency.
Examples of cycling specific track sets (can easily be translated into road sets – we will look into this more specifically in the practical program planning of this course). Distances to develop creatine phosphate metabolism: standing starts, short distances (125-250 M) with maximum intensity, cycling sets with short distance and long rest interval (i.e., 4-6 x 125 M, 2-4 x 250 M with rest interval 1-3 min.).
Anaerobic Metabolism (Anaerobic-Glycolitic) is the non-oxidative process of recycling of ATP from glycogen. Glycogen is stored in the muscle cells. Glycogen fairly rapidly recycles ATP, but it is slower than from CP. Anaerobic metabolism produces lactate. It is the main energy system for exercise bouts of 30 sec until 3 min. When distances are longer, aerobic metabolism predominates. Anaerobic metabolism has high power, middle capacity, and low efficiency.
Examples of cycling sets and distances that develop anaerobic metabolism: distances of 250/500m to 2km, high intensity cycling sets with short rest interval (i.e., 6-16 x 250-500 M, 4-8 x 500 M, 2-4 x 1500 M, 2 x 2000 broken M with rest interval 20-30 sec etc.).
Aerobic Metabolism is the oxidative process of recycling ATP primarily from glycogen. It is a slow process of recycling ATP. Glycogen for aerobic metabolism is stored in muscle, liver, and blood. Fats and proteins can be involved in aerobic metabolism also, but this process is very slow (long distance cycling).
Aerobic metabolism is the main energy system for distances longer than 4 min. The longer distance, the more energy derived from aerobic metabolism. Aerobic metabolism takes place in a small intracellular organelle called mitochondria. Aerobic metabolism has low power, high capacity, and high efficiency.
Examples of cycling sets and distances that develop aerobic metabolism: distances of 2000 M and longer, low and middle intensity cycling sets with short rest interval (i.e., 5 and more x 5000 M, 10 and more x 2000 M, 7 and more x 3000 M, 7 and more x 4000 M etc.).
4.5. Energy Zones (Categories) In Cycling
Based on the physiological responses of athletes to different intensities, workload volume can be divided into the several energy zones in cycling. There are several classifications of workload.
Table.5. physiological responses to exercise.
Chapter.5
5.1. Building and realising a correct planning in function from the athletes goals.
Planning the season
The key to successful competitive cycling is not simply to cycle as fast as possible, but to cycle as fast as possible at the
correct time of the year. This is best illustrated for instance by the Dutch national squad in their build up towards the
Olympics in Beijing 2008. The times their athletes realised in the world cups and world championships were outstanding but
three and half months later at the Olympics their peaks were not realised and their performance times for example in the
individual pursuit was a massive 22seconds flop.
Generally, from the beginning to the end of the season, training should be built up (progression) to maximum volume and
then declined towards the important competition. The training should change from general to specific terms of the type of
exercise, the duration and the intensity. Consequently, optimal performance may be suppressed through much of the
season due to fatigue, but finish at the highest level possible by the most important competition. Periods of rest and
recovery will be included throughout the season, but will be most frequent during the final preparation phase and dominant
at the end of the season.
For young athletes it is vitally important that the multi-year planning is priority this means that a cyclist’s who is starting a
season should not consider the next competition as the most important of his/her career. Preparing for the future using the
season as a stepping stone is the key to success.
The training programme needs to be constructed around the competitions targeted. It is important that the governing body
recognises that the positioning of competitions in the yearly calendar is crucial to the physical development of the cyclists. For
instance, how far from the major games should the trials be held or in other terms qualification races should be well calculated
to allow time to build from these relative peaks in form to realise higher standards of performance at the major goals? In many
countries the trend towards two or even three seasons for elite athletes, culminating in an important competition at the end of
each. The most successful championship cyclists who qualify for major championships are quite often see preparing and building
through secondary goals as a progression to the major games. E.g. Athletes who are building through the tour of Spain in
progression towards the world championships, athletes building and using the Tour De France as a platform towards the
Olympics. However it is crucial that the multi-year planning is taken into consideration because cyclists who are not correctly
prepared and developed in their stage of training evolution will have major difficulties in realising their major goal due to
overtraining in the progression phase.
If we consider a meso-cycle of 12-14 weeks, we first need to plan backwards from the major peak at the most important
competition during that stage. The details that can be planned include the competition dates, the training details, the
fitness/gym details, technical aspects and the intended testing programme. These will be summary points at this stage and
world include approximate volumes, durations and intensities of training to be performed.
Certain aspects may always be a part of every cycle and may be even included at the start. The general pattern through the
course of the cycle is also relevant. The fatigue level of the cyclists will gradually increase as the volume and intensity of the
training progress. Consequently, the performance peak and therefore racing speed will deteriorate throughout the first seven
weeks of the cycle before recovering towards the final week before the main competition. It is very important to educate the
cyclists, parents and other relevant persons in the programme throughout the phase, so that motivation and enthusiasm is
maintained.
Once the detail of the meso-cycle is identified, the focus needs to be turned towards the weekly training aspects at each stage
through the cycle. General details of each session e.g. volume, intensity, type of training targeted, technique and technical
aspects to focus on can all be included in brief in this format.
Fig.11. the coaches task to plan the race calendar with the correct orientated goals for the season. This is importantly
complementary with the multi-year planning.
Fig.12. structuring your macro-cycle around the race calendar.
Fig.13. designing and manipulating the desired and correct effect from the macro-volume into the meso-cycle energy system.
Fig.13,14,15. meso-cycle planning – the finishing touch. Adding the rights mix of intensities.
Fig14,15. Meso-cycle a unique design to fit your athlete`s individual program.
It is crucial that coaches use their knowledge and perception of the ‘big picture’ and then focus down through smaller time
frames to eventually construct the detail of the session. The numbers and figures which compromise the training session should
be arrived through working from first principles and not simply off the top of the head, with a retrosprective justification.
The Phases
1. Preparation
2. Development stage (a) aerobic
3. Development stage (b) anaerobic
4. Race preparation and competition
5. Rest, recovery, recuperation and regeneration. The four BIG R’s
5.2. Phases in the planning scheme
1. Preparation phase
The start of any training cycle will always have a preparation phase. This phase will provide a gradual introduction to training
stress and prepare the body for harder development phases. This phase will also very importantly lay down the foundation or
you can look at it as the athletes ‘investment’. The length and content of this phase will depend on the period of rest or
inactivity, the speed of initial adaptation of the cyclists and the volume and intensity intended in the developmental phases.
The preparation phase will often provide general training. Both on the bike and in the fitness. Involving the introduction and
development of technique and gradually increase the volume of work at low intensities of course. Cyclists should train with
different modes of exercise e.g. running, team games, circuits, Mtb and cyclo-cross.
At the start of the season, it is presumed that the cyclist will have had the longest period of inactivity, and therefore more time
should be spent on preparation at this stage than at the start of any subsequent cycles. The preparation phase will provide a
solid base from which to work for the rest of season. It is important therefore that the training provides this base in terms of
general strength and endurance. Similarly, it is crucial to establish good technique using training tools such as ‘power-cranks’.
This is important to develop which will be continued and relied upon during the more stressful periods ahead.
Evaluation of the cyclist physical state at the beginning and end of this phase would be valuable. A range of tests to:
(a) Find out the effects of the previous rest period on particular aspects of physical fitness.
(b) Establish a base-point in particular aspects from which to work and improve throughout the season would be important in
beginning any testing and monitoring programme.
Development Phase: Aerobic
The transition between phases should always be done gradually. It may be useful towards the end of one phase to include some
of the work intended in the next phase. Similarly, as the programme moves into a new phase it would be useful to include
elements of the previous phase. If the transition from one phase to another is too sudden, the cyclist may fail to adapt to the
new stresses placed on the body and overtraining may result.
The aerobic training phase will be the longest phase for all but the specialized sprints. The volume and intensity of the work will
increase up to maximal levels for the development of aerobic capacity. This may take between 6 and 10 weeks depending on the
experience, age, maturity, standard and training background of the cyclist. It is scientifically proven that extending this phase for
longer periods is unlikely to reap further improvements without a change in training contact or a phase of adaptation. Many
studies have shown rapid improvements in aerobic capacity of senior elite athletes after progressive endurance training.
Improvements tend to plateau at approximately 6-8weeks, where further endurance training will not result in continued
increases in aerobic capacity. (costill et al 1992,p135). It would appear logical to limit the length of this phase accordingly, and
provide test on the ergometer to provide evidence to change to develop anaerobic capacity or introduce a competiton.
Development phase: Anaerobic
The move from the aerobic to the anaerobic training phase should be a fairly natural one. As mentioned, towards the end of the
aerobic training phase elements of anaerobic training should be introduced to the programme. This can often be combined with
an appropriately chosen competiton to provide the higher intensity sprint or anaerobic exercise. Similarly, the aerobic content
of the program will not suddenly disappear. The benefits of the previous phase (increased aerobic capacity) should be
maintained as much as possible whilst improvements are made in anaerobic capacity. Good aerobic conditioning will of course
enhance recovery processes between bouts of anaerobic exercise and between sessions.
Race practice and competiton phase.
There are many competitions which fill the competitive calendar. It is important that the coach considers the best interests of
athlete when constructing the programme and entering particular competitions. Preparation for the most important
competition of the meso-cycle will involve a decrease in aerobic work-load, however it is important to maintain aerobic fitness.
There will be an increase in race specific cycling efforts and motor-pacing. There will also be a greater amount of rest and
recovery within and between sessions.
This is a crucial period for field testing so that the data bank and references towards the individual progression charts can be
maintained. Gear ratios and performance estimations will also be made in this period.
The relative importance of training aspects between phases, showing primary objectives, secondary objectives and
maintenance levels.
Aerobic Development phase
(a) Aerobic capacity – primary objective, 60%
(b) Alactic anaerobic capacity – secondary objective, 30%
(c) Lactic anaerobic capacity – maintenance, 10%
Anaerobic development phase
(a) Lactic anaerobic capacity – primary objective, 60%
(b) Aerobic capacity – secondary objective, 30%
(c) Alactic anaerobic capacity – maintenance, 10%
Race pace practice and competiton
(a) Alactic anaerobic capacity – primary objective,60%
(b) Lactic anaerobic capacity – secondary objective, 30%
(c) Aerobic capacity – maintenance, 10%
REST, Recovery, Recuperation and Regeneration
This should be a period to relax both physically and mentally after a period of intense stress of 12-16 weeks. The length of this
phase will depend on the importance of the competition just passed (therefore the level of pressure) and the importance of the
competition at the end of the next phase. Generally during the season, at the end of meso-cycles 1 and 2 this period may be
only one week and quite often see as an active recuperation week. At the end of the third meso-cycle, this period may extend to
3 or 4 weeks. The length of this period is quite individual and should be determined by the athletes desire to restart.
“Reaching to London and beyond” Wiggins 2008
TTaalleenntt
TTrraacckkiinngg
PPrrooggrraamm
2008-2012/16
Multi-year planning should be a progression of aerobic based training priorities orientated towards specific individualized race goals. Talent should be fast tracked based on a percentage screening system that nurtures a pool of top quality athletes for Olympic success. The pool of athletes needs to be large enough to enable a sound balance between racing and training meso-cycles.
Nurturing talent through to world and Olympic success
DEEL 2
1. Planning
“FAILING TO PLAN IS PLANNING TO FAIL”
1.1. Introduction
The coach/trainer has to be aware of the factors which effect performance in sport. The relative importance of these factors in
relation to the individual athlete, the race event and the training process all have to be considered before constructing the
programme.
Knowledge of the training principles and the process of the stress-adaptation will guide the volume, intensity and the rest
applied to the cyclist to optimise training for performance improvements. The application of these factors in relation to the
cycling calendar must be carefully controlled and adjusted to ensure optimal performances at the correct times of the year.
The complex process is time consuming, but if done thoroughly and meticulously, will reap great rewards and improve the
coach’s chance of regular and high level success. “You are what you train” Wiggins 2005
Puzzling the correct training to develop the correct adaptations
Taking athletes to a peak for important competitions requires careful planning. That planning can and should extend over
several years. Obviously, this gigantic task must be broken down into smaller, more manageable units. Here we will discuss the
importance of structuring and integrating these units. We will start with the long term objectives the multi-year planning and
work down through the yearly planning or macro-planning. The season planning, weekly planning and daily planning.
Multi-year planning
Multi-year planning is of great importance to an athlete’s career because this is the base of the long term goals. This is
commonly executed with success from childhood to the adult years. Top sport schools and clubs who are working with the
youth in the sport should have a general plan for regulating the nature, volume, and intensity of training throughout their
competitive years with a goal of achieving peak performances sometime in their adult years.
Multi-year planning can and often is orientated around the major competitions like the Olympics and world championships.
Quarterly planning
Planning on a quarterly base is crucial in targeting the Olympics and any coach that has Olympic talent should base their
planning carefully with this main objective in mind. Many coaches are not preparing their athletes in the correct manner for
approaching top competitions. For example Athletes are quite simply asked to train hard and improve as much as they can each
year and mainly goal orientated towards times. No system is in place except trying to cycle faster in training each year. Good
planning focuses on improving each athlete’s weaknesses during the early years of the multi-year plan and then concentrating
on increasing endurance and speed the year the major competition takes place.
The largest volume and greatest intensity of specific training occur during the years when the Olympics are held. Laying a
foundation for endurance and speed receives greater emphasis for the other years between. Training should focus more on
developing aerobic capacity and anaerobic power during those years, whereas training during the competition years should
emphasise improving aerobic and anaerobic muscular endurance. The off years or building block years should be used crucially
in improving specific competition weaknesses, such as faulty technique, positioning, starts, and weaknesses in strength and
power of certain muscle groups, and poor flexibility in important joints.
Year Planning
Using the framework for a multiyear plan as a guide, the next step is to plan each training year. Most coaches should divide the
training year into two or hopefully three seasons. This is based on the importance of championship competitions than it is on
physiological effectiveness. Don’t forget their will be a great importance on team and sponsor demands so count on splitting
your seasons up. This is common place especially with the demands of endurance track riders that have also road commitments.
.
Systematic planning your season
A planned program of systematic progression is one of the best ways to ensure that cyclists peak at the right time of the season.
Systematic progression should also help them avoid plateaus and overtraining. Initially progress may be slower when seasons
are constructed in this manner, however cyclists that produce a systematic progression after the season’s transition normally
realise a healthy evolution in strength and thus can realise good performance early on in the season. , ultimately the cyclists will
reach higher levels of adaptation and, consequently achieve better performances.
A systematic plan allows the coach to compartmentalise the various types of training their athletes do into periods of emphasis
and maintenance. All levels of training the energy systems as mentioned in this course will be complimented with such a
planning. Incorporated into proper proportions and administered at the appropriate times of the season. In addition, periodic
changes in training emphasis make it less likely that the effect of one type of training will inhibit the effect of another.
The first step in the process of moving from theory to practice is determining the trainable components and their placement in
the training year with regard to development and maintenance.
Trainable components
First are the metabolic components of the training, aerobic capacity, anaerobic power, and aerobic and anaerobic muscular
endurance. These should dominate the structure of each macro-cycle of every season throughout the year. Of equal importance
is the technique and this is quite often overlooked in cycling. Athletes should be drilled in cadence and gearing understanding in
connection with crank length. This is a major area where we are researching using stroke mechanics with power-cranks tools.
The athletes need to be toughened so that they can re-main effective in spite of fatigue and pain later in their competitions.
Strength, power and flexibility on the bike and in the gym should be a very big part of the seasonal planning. Starts and other
track or off-road skills should receive priority goals in specific areas of the season. In addition there should be psychological
studies instructed to prepare the athletes emotionally and being mentally tough in races. Finally the planning should
accommodate proper nutritional guidance (cooking lessons) and time management.
After the trainable components have been determined, the next step in planning a season is to separate it into parts with
specific training and competiton purposes. Following this, each season phase should be separated into even smaller units when
the principle of progressive overload is applied from unit to unit.
The process of structuring a season into smaller units with specific purposes and goals is called training cycles.
1.2. Training cycles
Training cycles fall into three categories. MACRO-CYCLES, MESO-CYCLES and MICRO-CYCLES.
Macro-cycles
Goals and procedure for the general preparation phase
Goals:
Improve aerobic capacity, particular circulatory and respiratory functions that will improve oxygen delivery to
the muscles and both the oxygen consumption and lactate removal of slow-twitch muscle fibres. This is an
important step in developing power-cranks into the program. Through research studies using SRM with power-
cranks proof is towards high demands to the circulatory and respiratory functions.
Improve the anaerobic capacity for especially for sprinters.
Improve stroke mechanics, starts – neuromuscular patterns for cycle functions.
Increase overall muscular strength
Increase specific joint flexibility
Maintain aerobic and anaerobic endurance
Correct nutritional deficiencies and errors in time management
Monitoring suggestions
VO2max
Aerobic and anaerobic thresholds
Peak blood lactate
Speed
General muscular strength
Range of motion in specific joint
Positioning bike fitting RETUL 3d analysis
Goals and procedures for the specific preparation phase
Goals:
Endurance cyclists should focus on improving the rate of oxygen consumption and lactate removal in their fast-twitch
muscle fibres
Improve the rates of oxygen consumption and lactate removal of their slow-twitch muscle fibres.
Maintain speed
Progressive overload of volume and intensity
Monitoring suggestions
VO2max
Aerobic and anaerobic thresholds
Peak blood lactate
Sprint speed –
Strength in specific muscle groups
Range of motion in specific joints
Positioning adjustments monitoring RETUL 3d analysis
Goals and procedures for the race preparation phase
Goals:
Improve aerobic and anaerobic endurance
Riding longer at race pace
Increase speed and optimize anaerobic power
Increase ability to maintain good stroke mechanics when fatigued at end of races.
Increase specific muscular power
Increase specific joint flexibility
Maintain aerobic capacity
Refine pacing and racing skills
Increase intensity and increase density
Monitoring suggestions
VO2max
Aerobic and anaerobic thresholds
Peak blood lactate
Speed
Power
Range of motion in specific joints
Opbouw Worldclass program Olympic Target
Trainingsjaar 1*17 2*18 3*19 4*20/2012
5*21 6*22 7*23 8*24/2016
9*25 10*26 11*27 12*28/2020
Prestatiedoelstellingen *EK piste *EK WEG *BKWEG *WK piste
*EK piste *EK WEG *BK WEG *WK piste
*EK piste *EK/WK WEG *Wkpiste *WB4*
*WKWEG *Wkpiste WB4* Olympics
*EK piste *WB1 *WK piste *WKWEG
*EK piste *WB1 *WK piste *WK WEG
*EK piste *EK WEG *WK *WB4*
*EK WEG *Wk WB4* Olympics
*EK piste *WB1 *WK piste *WKWEG
*EK piste *WB1 *WK piste *WKWEG
*EK piste *EK WEG *WK *WB4*
*EK WEG *Wk WB4* Olympics
Rittenwedstrijden 3* 3-4* 4* 4* 3* 4* 4* 4* 4* 4* 4* 4*
6daagse programma 2* 2* 2* 1* 6* 4* 2* 1* 6* 4* 2* 1*
Trainingsweken Aantal/jaar:
46 46 47 48 47 47 48 49 47 48 49 50
Trainingsdagen Aantal/jaar:
320 320 329 336 329 329 336 343 329 336 343 350
Trainingseenheden Aantal/Week: Duur:
6 7 8 10 8 8 10 10 8 10 10 10
2xdaags-training Aantal/weken:
10 12 16 20+ 12 16 20+ 20+ 12 16 20+ 20+
Omvang Aantal km/jaar:
15k 25k 30k 36-38k 30k 36k 40k 38k 30k 38k 40k 38k
Krachttraining Type: Eenheden/week: Duur:
*MaxSt *2-3 *1,5
*MaxSt *En *2-3 *1,5
*MaxSt *En *Ex *2-3 *1,5
*MaxSt *En *Ex *2-3 *1,5
*MaxSt *2-3 *1,5
*MaxSt *3
*1,5
*MaxSt *En *Ex *2-3 *1,5
*MaxSt *En *Ex *2-3 *1,5
*MaxSt *2-3 *1,5
*MaxSt *2-3 *1,5
*MaxSt *En *Ex *2-3 *1,5
*MaxSt *En *Ex *2-
3 *1,5
Complimentaire sporten Duur/maand: Type:
*lopen *cross
*zwemmen
*lopen *cross
*zwemmen
*letsel/prev * Lopen
*letsel/prev * Lopen
*lopen *cross
*zwemmen
*lopen *cross
*zwemmen
*lopen *cross
*zwemmen
*lopen *cross
*zwemmen
*lopen *cross
*zwemmen
*lopen *cross
*zwemmen
*lopen *cross
*zwemmen
*lopen *cross *zwemmen
Table.6. example of mutil-year planning
2. Meso-cycles are important in developing individual periodisation.
Macro-cycles should be made up of meso-cycles, shorter phases devoted to the progression improvement of the major training components of a particular macro-cycle.
Meso-cycles provide the the primary blocks for progressive overload. It is not possible to guide the cyclists correctly just with a race calendar or macro-cycle. An increase in
training intensity, volume, or focus should occur with each new meso-cycle. Meso-cyles can be from 2-8 weeks in length. Training for any longer period will normally cause
for saturation. The chances of boredom and overtraining will increase.
Meso-cycles need to be constructed carefully to coincide not only with the goals of the season but also with family, education and social commitments. The goals of each
meso-cycle with regard to type of training, volume, and intensity should be determined by the purposes of the macro-cycle. The placement of major competitions and
exams will be important factors. Finally the tests that will be used to evaluate the effectiveness of each meso-cycle and macro-cycle should also be resolved.
Meso-cycles generally include a working phase and a recovery phase. The stepwise increase in training intensity, volume, or focus takes place in the working phase, which
may last from 2 to 6 weeks. The working phase of the mesocycle can be constructed in two ways, in a staircase pattern or a constant pattern. The recovery phase is
included at the end of each meso- to enable adaptations of the training process
Table.7. meso-cycle
Evaluatietests Type:
*Eurofit *KULLAB *VWEM
LAB *STEPTests
*KULLAB *VWEM
LAB *STEPTests
*KULLAB *VWEM
LAB *STEPTest
s
*KULLAB *VWEM LAB *STEPTests
*KULLAB *VWEM
LAB *STEPTests
*KULLAB *VWEM
LAB *STEPTests
*KULLAB *VWEM
LAB *STEPTests
*KULLAB *VWEM LAB *STEPTests
*KULLAB *VWEM
LAB *STEPTests
*KULLAB *VWEM
LAB *STEPTests
*KULLAB *VWEM
LAB *STEPTests
*KULLAB *VWEM LAB *STEPTests
Present level of
conditioning
Next level of
conditioning
compensation Fatigue
Super-compensation
Meso-cyles that encourage adaptation can be constructed in a great number of ways. They generally fall into three categories, long meso-cycles , short meso-cycles and
mixed meso-cycles.
Mixed meso-cycles are preferred in a perfect endurance planning. However limitations maybe enforced due to illness or periods of interrupted progression due to school
commitments for example. Then the shorter meso-cycles would be considered..
Anaerobic power and anaerobic capacity training sets are crucial trainings and are delicately spiced in the training at correct fractions of intensities. Both by the female
athletes and the male athletes combine these training analysis below to show how intensive and structured these sets are in the training of a perfect super compensation
of the meso-cycles. These sets have proven how important they are to realize a good fast finish after a fast race but also how intensive and frequent the athletes are able to
attack through a maintained anaerobic capacity.
KBWB PISTE national Team
Mesocycle III 2008 weeks I II III IV V VI
Volume
Intensity
Volume
WB LA
Dates WK09/Dec Wk16/Dec WK23/Dec WK30/Dec WK 06/Jan WK13/Jan
Volume Tu// WK Track//Road 4//8 2//8 2//8 0//8 0//8 7//3
KM//WK 450 750 850 950 750 450
Regeneration 3 3 3 4 4 4
AeC1 2 2 2 2 2
AeC2 1 1 1 1 1 2
AeP 1 1 2 2 3
AnC 3 3 2 3 3
Meso V Meso VI
KBWB PISTE national Team
Mesocycle III 2008 weeks
Volume
Intensity
Volume
Stage VWEM WK Manchester
Dates WK16/Mar WK23/Mar
Volume Tu// WK Track//Road 2//5 6//0
350 250
Regeneration 3 2
AeC1
AeC2 3 3
AeP 2 2
AnC
MAX Test
SS or CR
AnP 3 2
Field Test
95,00%
96,00%
97,00%
98,00%
99,00%
100,00%
Units
anaerobic
ReC ReG aerobic
90%
95%
100%
units
anaerobic
ReC ReG aerobic
Table.8. meso-cycle planning
TALENT Jun/ U23 Track based multi-year planning in olympic projection
sept oct nov dec jan feb mar apr mei jun jul aug sept oct nov dec Jan feb mar apr mei jun jul aug
Training Year 2007/2008
Training objectives BASE Comp. Specific BASE Intensive Comp. Specific
Testing ERG
ST
ERG
ST training units/day 1 1
1 1 1 2 1 1 1 1
1 1 2 1 1 2 1 1 1
Training days/maand 20 20
20 20 20 20 20 20 20 20 20
20 20 20 20 20 20 20 20 20
1000 600
Volume km 200
Major competitions
15000km
WK
Mex
ico
WK
ZA
F
BK sept oct nov dec jan feb mar apr mei jun jul aug sept oct nov dec Jan feb mar apr mei jun jul aug
Juniors 1ejaars Juniors 2ejaars
Training Year 2008/2009
Training objectives Spe BASE Intensive Comp. Specific BASE Intensive Comp. Specific
Testing
ERG
ST
ST training units/day 1 1
1 1 1 1 1 2 1 1 2 1 1
1 2 1 1 2 1 2 1 1
Training days/maand 20 20
20 20 20 22 20 26 20 20 22 20 20
20 26 24 20 26 24 28 22 20
1000
600
Volume km 200
Major competitions
25000km
EK
WB
EK BK
EK
WK WK
EK
sept oct nov dec jan feb mar apr mei jun jul aug sept oct nov dec Jan feb mar apr mei jun jul aug
U23 1ejaars U23 2ejaars
Training Year 2011/2012
Training objectives Spe BASE Intensive Comp. Specific BASE Intensive Comp. Specific
Testing ST
ERG
ST
ERG
ST
ST
ST ST
ST training units/day 1 1 1 1 2 1 1 1 2 1 2 1 1 1 1 2 2 1 1 1 2 2 1 1
Opbouw Worldclass program Olympic Target
Training Year 2009/2010
Training objectives Spe BASE Intensive Comp. Specific BASE Intensive Comp. Specific
Testing ST
ERG
ST
ERG
ST
ST
ST training units/day 1
1 1 1 1 1 2 1 1 1 1 1
1 2 1 1 2 1 2 1 1
Training days/maand 20 20
20 20 22 24 20 28 24 20 24 21 20
22 28 24 22 24 24 28 22 22 1000
600
Volume km 200
Major competitions
30000km
EK
WB
EK BK
EK
WK WK
EK
sept oct nov dec jan feb mar apr mei jun jul aug sept oct nov dec Jan feb mar apr mei jun jul aug
U23 3ejaars Elite
Training Year 2010/2011
Training objectives Spe BASE Comp. Specific BASE Intensive Comp. Specific
Testing ST
ERG
ST
ERG
ST
ST
ST ST
ST training units/day 1 1
1 2 1 1 1 2 1 2 1 1 1 1 2 2 1 1 1 2 2 1 1
Training days/maand 20 24
24 28 26 22 24 26 24 28 24 21 24 24 28 28 24 22 24 28 28 24 20
Volume
36,000km
Major competitions
EK
WB WB WK
EK BK
EK
WK WK
EK
sept oct nov dec jan feb mar apr mei jun jul aug sept oct nov dec Jan feb mar apr mei jun jul aug
Elite Elite
Table.9. multi-year planning
Table.10. multi-year planning
Table.11. multi-year planning Olympic year
Training days/maand 20 24 24 24 28 26 22 24 26 24 28 24 21 24 24 28 28 24 22 24 28 28 24 20
1000
600
Volume km 200 38,000km
Major competitions
EK
WB WB WK
EK BK
EK
WK WK
London
sept oct nov dec jan feb mar apr mei jun jul aug sept oct nov dec Jan feb mar apr mei jun jul aug
Elite Elite
General guidelines in the form of a multi-year plan per/age group.
Next to this general multi-year planning. Each athlete has their individual plan drawn out on these base guidelines.
Major competitions
Trainings weeks
Trainings intensities
Strength training, cross training and injury prevention program
Test screening program
Test follow up and meso-cycle adaption in relationship to the major competitons.
“The purpose of competitive bicycle training is to increase aerobic and anaerobic capacity and maximum sustainable power output.
The power output is a critical parameter that must be measured and recorded during racing and training”.
Training examples of structuring your sessions correctly in your progressive meso-cycles.
The two graphs represent examples of planned anaerobic capacity training and the end result of specific training work in a race situation’s. In this example to the right
Jolien D’hoore RACE analysis is in the last 1min30 of the race. Jolien is developing high watts out of the corners and recuperating nicely in the wheel and preparing for the
finish sprint. Here Jolien wins the bunch sprint from nieuwelingen jongens. The graph to the left shows an anaerobic capacity training file of Jolien D’hoore from a training
camp in LA in January 2008.
Note two very important areas. Firstly how the heart rate in the training sets is challenged and this is designed to increase throughout the sets to a pinnacle in the last
efforts. This is also similar to relate to in the race and the heart rate peaks gradually and finally limits at the very end. Most interestingly the main aim of the training sets is
the cadence and peak watts. See how the recuperation is massive before each effort and each watt delivery is executed with no drop-off from cadence. This is a trainable
skill that we can only achieve in the correct building phases of anaerobic and aerobic base training.
This is an area of the energy system that has been worked on extensively throughout the winter buffering the aerobic system and preparing the system to adapt to the
anaerobic peak training that is planned in the main specific taper periods.
Note how the anaerobic system is steadily stressed in the periodic planning. This is very important in realising a perfect taper. Each phase is carefully designed with the right
amount of rest and training intensities, fractions for determining the athlete’s individual absolute top condition at the right moment.
Watts+700 Cadence +120rpm, Peaking with a
short- recuperation and recharging very fast
before again repeating a maximum average
delivery.
Table.12.Training specific anaerobic
capacity
Table.13.Using the trained energy systems in a race situation
Fig.16 Junior women world champion sprint 2008 fig.17. Podium junior women world road championships 2008.
Fig. 18.
Important
follow up and
feedback
regarding the
meso-cycle
planning and
periodisation.
The test
results also
are
important
indications
towards
perfecting
this sort of
evaluation.
Fig.19. Key attributes to determining a correct training analysis.
TrainingPeaks uses a special algorithm to calculate an adjusted or normalized power for each ride or
segment of a ride (longer than 30 seconds) that you analyze.
1) the physiological responses to rapid changes in exercise intensity are not instantaneous, but follow a
predictable time course, and 2) many critical physiological responses (e.g., glycogen utilization, lactate
production, stress hormone levels) are curve-linearly, rather than linearly, related to exercise intensity, By
taking these factors into account, normalized power provides a better measure of the true physiological
demands of a given training session.
NP is an estimate of the power that you could have maintained for the same physiological "cost" if your
power output had been perfectly constant (e.g., as on a stationary cycle ergometer), rather than variable.
Keeping track of normalized power is therefore a more accurate way of quantifying the actual intensity of
training sessions, or even races.
Although normalized power is a better measure of training intensity than average power, it does not take into
account differences in fitness within or between individuals. Training Peaks therefore also calculates an
intensity factor (IF) for every workout or time range analyzed. IF is simply the ratio of the normalized
power as described above to your threshold power (entered under "Athlete Settings" at your "Athlete
Home"). For example, if your normalized power for a long training ride done early in the year is 210 W and
your threshold power at the time is 280 W, then the IF for that workout would be 0.75. However, if you did
that same exact ride later in the year after your threshold power had risen to 300 W, then the IF would be
lower, i.e., 0.70. IF therefore provides a valid and convenient way of comparing the relative intensity of a
training session or race either within or between riders, taking into account changes or differences in
threshold power. Typical IF values for various training sessions or races are as follows:
Typical IF values for various training sessions or races are as follows:
Less than 0.75 recovery rides
0.75-0.85 endurance-paced training rides
0.85-0.95 tempo rides, aerobic and anaerobic interval workouts (work and rest periods combined),
longer (>2.5 h) road races
0.95-1.05 lactate threshold intervals (work period only), shorter (<2.5 h) road races, criteriums,
circuit races, longer (e.g., 40 km) TTs
1.05-1.15 shorter (e.g., 15 km) TTs, track points race
Greater than 1.15 prologue TT, track pursuit, track miss-and-out
Note that one particularly useful application of IF is to check for changes in threshold power -
specifically, an IF of more than 1.05 for a race that is approximately 1 hour in duration is often a sign
that the rider's threshold power is actually greater than that presently entered into the program.
Thus, by simply examining a rider's IF for various events during the course of a season, increases or
decreases in threshold power can often be revealed without the need for frequent formal testing.
While exercise intensity is clearly an important factor in determining the type and magnitude of
physiological adaptations to training, exercise frequency and duration - which together determine the overall
training volume - are important factors as well. However, there is obviously an interaction between training
intensity and volume, i.e., at some point as intensity goes up volume must come down, and vice-versa, or
else you will become over-trained. To quantify the overall training load and hopefully help avoid such a
situation, Training Peaks uses your power data to calculate a training stress score (TSS) for every workout,
and provides a graphical summary of your recent TSS on your Athlete Home page. TSS, which is modeled
after Dr. Eric Bannister's heart rate-based training impulse (TRIMPS), takes into account both the intensity
(i.e., IF) and the duration of each training session, and might be best viewed as a predictor of the amount of
glycogen utilized in each workout. Thus, a very high TSS resulting from a single race or training session can
be used an indicator that one or more days should be scheduled. For example, while individuals will tend to
differ in how much training they can tolerate, depending on their training background, natural abilities, etc.,
the following scale can be used as an approximate guide:
The following scale can be used as an approximate guide:
Less than 150 - low (recovery generally complete by following day)
150-300 - medium (some residual fatigue may be present the next day, but gone by 2nd day)
300-450 - high (some residual fatigue may be present even after 2 day
Greater than 450 - very high (residual fatigue lasting several days likely) As well, the cumulative
TSS per week or per month can be used help identify the maximum intensity and volume of training
that still leads to improvements, rather than overtraining.
Fig.20. Performance chart
Fig.21a.Maximum power output classification
Maximal power output (in W/kg)
Men Women
5 s 1 min 5 min FT 5 s 1 min 5 min FT
24,04 11,50 7,60 6,40 19,42 9,29 6,61 5,69
23,77 11,39 7,50 6,31 19,20 9,20 6,52 5,61
23,50 11,27 7,39 6,22 18,99 9,11 6,42 5,53
23,22 11,16 7,29 6,13 18,77 9,02 6,33 5,44
World class 22,95 11,04 7,19 6,04 18,56 8,93 6,24 5,36
(e.g., international pro) 22,68 10,93 7,08 5,96 18,34 8,84 6,15 5,28
22,41 10,81 6,98 5,87 18,13 8,75 6,05 5,20
22,14 10,70 6,88 5,78 17,91 8,66 5,96 5,12
21,86 10,58 6,77 5,69 17,70 8,56 5,87 5,03
21,59 10,47 6,67 5,60 17,48 8,47 5,78 4,95
Exceptional 21,32 10,35 6,57 5,51 17,26 8,38 5,68 4,87
(e.g., domestic pro) 21,05 10,24 6,46 5,42 17,05 8,29 5,59 4,79
20,78 10,12 6,36 5,33 16,83 8,20 5,50 4,70
20,51 10,01 6,26 5,24 16,62 8,11 5,41 4,62
20,23 9,89 6,15 5,15 16,40 8,02 5,31 4,54
19,96 9,78 6,05 5,07 16,19 7,93 5,22 4,46
Excellent 19,69 9,66 5,95 4,98 15,97 7,84 5,13 4,38
(e.g., cat. 1) 19,42 9,55 5,84 4,89 15,76 7,75 5,04 4,29
19,15 9,43 5,74 4,80 15,54 7,66 4,94 4,21
18,87 9,32 5,64 4,71 15,32 7,57 4,85 4,13
18,60 9,20 5,53 4,62 15,11 7,48 4,76 4,05
18,33 9,09 5,43 4,53 14,89 7,39 4,67 3,97
Very good 18,06 8,97 5,33 4,44 14,68 7,30 4,57 3,88
(e.g., cat. 2) 17,79 8,86 5,22 4,35 14,46 7,21 4,48 3,80
17,51 8,74 5,12 4,27 14,25 7,11 4,39 3,72
17,24 8,63 5,01 4,18 14,03 7,02 4,30 3,64
16,97 8,51 4,91 4,09 13,82 6,93 4,20 3,55
16,70 8,40 4,81 4,00 13,60 6,84 4,11 3,47
16,43 8,28 4,70 3,91 13,39 6,75 4,02 3,39
Good 16,15 8,17 4,60 3,82 13,17 6,66 3,93 3,31
(e.g., cat. 3) 15,88 8,05 4,50 3,73 12,95 6,57 3,83 3,23
15,61 7,94 4,39 3,64 12,74 6,48 3,74 3,14
15,34 7,82 4,29 3,55 12,52 6,39 3,65 3,06
15,07 7,71 4,19 3,47 12,31 6,30 3,56 2,98
14,79 7,59 4,08 3,38 12,09 6,21 3,46 2,90
Moderate 14,52 7,48 3,98 3,29 11,88 6,12 3,37 2,82
(e.g., cat. 4) 14,25 7,36 3,88 3,20 11,66 6,03 3,28 2,73
13,98 7,25 3,77 3,11 11,45 5,94 3,19 2,65
13,71 7,13 3,67 3,02 11,23 5,85 3,09 2,57
13,44 7,02 3,57 2,93 11,01 5,76 3,00 2,49
13,16 6,90 3,46 2,84 10,80 5,66 2,91 2,40
Fair 12,89 6,79 3,36 2,75 10,58 5,57 2,82 2,32
(e.g., cat. 5) 12,62 6,67 3,26 2,66 10,37 5,48 2,72 2,24
12,35 6,56 3,15 2,58 10,15 5,39 2,63 2,16
12,08 6,44 3,05 2,49 9,94 5,30 2,54 2,08
11,80 6,33 2,95 2,40 9,72 5,21 2,45 1,99
11,53 6,21 2,84 2,31 9,51 5,12 2,35 1,91
Untrained 11,26 6,10 2,74 2,22 9,29 5,03 2,26 1,83
(e.g., non-racer) 10,99 5,99 2,64 2,13 9,07 4,94 2,17 1,75
Men Women
5 s 1 min 5 min FT 5 s 1 min 5 min FT
24,04 11,50 7,60 6,40 19,42 9,29 6,61 5,69
23,77 11,39 7,50 6,31 19,20 9,20 6,52 5,61
23,50 11,27 7,39 6,22 18,99 9,11 6,42 5,53
23,22 11,16 7,29 6,13 18,77 9,02 6,33 5,44
22,95 11,04 7,19 6,04 18,56 8,93 6,24 5,36
22,68 10,93 7,08 5,96 18,34 8,84 6,15 5,28
22,41 10,81 6,98 5,87 18,13 8,75 6,05 5,20
22,14 10,70 6,88 5,78 17,91 8,66 5,96 5,12
21,86 10,58 6,77 5,69 17,70 8,56 5,87 5,03
21,59 10,47 6,67 5,60 17,48 8,47 5,78 4,95
21,32 10,35 6,57 5,51 17,26 8,38 5,68 4,87
21,05 10,24 6,46 5,42 17,05 8,29 5,59 4,79
20,78 10,12 6,36 5,33 16,83 8,20 5,50 4,70
20,51 10,01 6,26 5,24 16,62 8,11 5,41 4,62
20,23 9,89 6,15 5,15 16,40 8,02 5,31 4,54
19,96 9,78 6,05 5,07 16,19 7,93 5,22 4,46
19,69 9,66 5,95 4,98 15,97 7,84 5,13 4,38
19,42 9,55 5,84 4,89 15,76 7,75 5,04 4,29
19,15 9,43 5,74 4,80 15,54 7,66 4,94 4,21
18,87 9,32 5,64 4,71 15,32 7,57 4,85 4,13
18,60 9,20 5,53 4,62 15,11 7,48 4,76 4,05
18,33 9,09 5,43 4,53 14,89 7,39 4,67 3,97
18,06 8,97 5,33 4,44 14,68 7,30 4,57 3,88
17,79 8,86 5,22 4,35 14,46 7,21 4,48 3,80
17,51 8,74 5,12 4,27 14,25 7,11 4,39 3,72
17,24 8,63 5,01 4,18 14,03 7,02 4,30 3,64
16,97 8,51 4,91 4,09 13,82 6,93 4,20 3,55
16,70 8,40 4,81 4,00 13,60 6,84 4,11 3,47
16,43 8,28 4,70 3,91 13,39 6,75 4,02 3,39
16,15 8,17 4,60 3,82 13,17 6,66 3,93 3,31
15,88 8,05 4,50 3,73 12,95 6,57 3,83 3,23
15,61 7,94 4,39 3,64 12,74 6,48 3,74 3,14 15,34 7,82 4,29 3,55 12,52 6,39 3,65 3,06
15,07 7,71 4,19 3,47 12,31 6,30 3,56 2,98
14,79 7,59 4,08 3,38 12,09 6,21 3,46 2,90
14,52 7,48 3,98 3,29 11,88 6,12 3,37 2,82
14,25 7,36 3,88 3,20 11,66 6,03 3,28 2,73
13,98 7,25 3,77 3,11 11,45 5,94 3,19 2,65
13,71 7,13 3,67 3,02 11,23 5,85 3,09 2,57 13,44 7,02 3,57 2,93 11,01 5,76 3,00 2,49 13,16 6,90 3,46 2,84 10,80 5,66 2,91 2,40
12,89 6,79 3,36 2,75 10,58 5,57 2,82 2,32
12,62 6,67 3,26 2,66 10,37 5,48 2,72 2,24 12,35 6,56 3,15 2,58 10,15 5,39 2,63 2,16 12,08 6,44 3,05 2,49 9,94 5,30 2,54 2,08 11,80 6,33 2,95 2,40 9,72 5,21 2,45 1,99
11,53 6,21 2,84 2,31 9,51 5,12 2,35 1,91
11,26 6,10 2,74 2,22 9,29 5,03 2,26 1,83
10,99 5,99 2,64 2,13 9,07 4,94 2,17 1,75
10,72 5,87 2,53 2,04 8,86 4,85 2,07 1,67
10,44 5,76 2,43 1,95 8,64 4,76 1,98 1,58
10,17 5,64 2,33 1,86 8,43 4,67 1,89 1,50
Fig.21b. power profiling pursuit rider
Heart rate distribution and watts distribution
Fig. 22. Heart rate distribution
Fig.23. Power (watts) distribution
Fig.24. Average power versus average power/weight ratio
Heart rate is an important indicator towards conditioning
together with the absolute resting pulse. These
measurements are good indicators that the energy zones are
correct in percentage proportioned throughout the training
program. Heart rate is no longer in use during the training
intensities to indicate the correct live energy intensity. Watts
has taken this measurement over as a more accurate live
training tool. See graph to the right.
fig.25. Mean maximal power
Fig.26. Training stress and intensity factor
Here the analysis is critical in determining
where the peak mean power has been
realized and that it follows the designed
meso-cycle. Here you can easily see when the
athletes are peaking.
This is balancing your athletes correctly and resting
them at the right moments.
Fig.27. training peaks – software example of data collection
Fig.28. Time and distance
fig.29. Performance management chart / periodic and training stress balance
Important CTL increases at different
rates as each different meso-cycle is
realized. Note as the CTL starts to
drop how the TSB immediately
changes indicating a good predictor
towards good performances.
CTL(blue) chronic
training load (volume en
intensity calculator
historically and
chronically)
ATL(pink) Acute training
load ( recently and
accurately calculating as
an exponential-weighted
moving average of daily
TSS with default time
constant set to 7dayATL .
TSB(yellow) training
stress balance –
difference between CTL
and ATL. Basically how
fresh or recovered the
athlete is.
Important values in intensity and
mean power 20mins power
Here this graph compliments your
designed meso planning. Easily picking
out and adjusting if necessary where the
peak distances and time is spent in
specific areas of the planning. These are
very important references for the multi-
year planning.
Limiting factors in competitive cycling
Fatigue ‘What limits a performance’
The common answer is ‘fatigue’. Fatigue can be defined as a reduction in force output by the muscles, which manifests itself in a
reduction in cycling speed. Despite this single factor for the limit in performance, it is clear that fatigue involves a complex of
events which occur in the working muscle which contribute to this reduction in force output.
It is not surprising to find that the cause of fatigue is dependent on the characteristics of the 3 energy systems, and that the
duration and intensity of the particular exercise will determine these causes.
In cycling events, the cause of fatigue can be sectioned into 3 groups of events, which rely heavily on each 3 energy systems. The
3 categories are GROUP 1 200-500m events GROUP 2 1km-3kmevents and GROUP 3 4km – points race 50km distances.
GROUP 1 200-500m
These events rely on the ability of the cyclist to create maximal cycling speed and maintain that speed for the duration of the
race. The ability of the muscles to create power necessary for velocity will be crucial, but will decline at approximately
10seconds into the race due to the depletion in phoshocreatine (PC). The reliance on energy supply will then come from
glycolysis, mainly anaerobically; although there will be a contribution from aerobic metabolism. Maximal exercise of ~22-28
seconds will increase the lactate produced in the muscle and reduce pH (increase acidity), although not to levels which will
significantly affect muscular contraction.
GROUP 2 1km-3km
Here in these events there is heavy reliance on anaerobic glycolysis for energy delivery and a resulting build up of high levels of
lactic acid. Lactic acid itself does not pose too many problems for the muscle as it can be removed easily and re-converted for
use once more as a fuel for metabolism. The associated build up of hydrogen ions from anaerobic glycolysis causes a reduction
in pH which creates an environment within the muscle which effects muscular function. The result of this will cause a lack of co-
ordination in the working muscle and reduce the rate of energy supply from a slowing in the Glycolytic pathways. In addition,
the associated pain and distress caused by these effects will result in a reduction of effort exerted by the athlete.
There are several ways to improve aspects associated with muscular acidosis. An improvement in aerobic conditioning should
allow cyclists to cycle at a faster pace before lactate accumulates, and will improve the supply of oxygen to the working muscles
to oxidise or remove the H+ ions. Improvements in anaerobic metabolism will allow a faster rate of glycolysis whilst providing
better buffering against the increase in muscular acidity. Tolerance to the associated pain may also be improved by de-
sensitisation from regular exposure to such conditions.
GROUP 3 4km – 50km+
The main cause here of fatigue is muscular acidosis, but the ability of a cyclist to continue exerting effort in conditions of stress
will also contribute. The aerobic condition of the cyclist is so closely linked to success in these events that the lack of adequate
conditioning can also be considered a factor. In addition, glycogen availability in certain muscle fibres (FAST TWITCH) may affect
the ability of an individual to sprint at the end of the race, particularly in longer races. In the shorter pursuit races the will be
little glycogen depletion in muscles which start with a normal glycogen balance.
Success in these events is achieved primarily from improving aerobic capacity to cycle at a faster pace before lactate
accumulation occurs, and to remove lactate from or oxidise lactate in the working muscles.
Table.14. Summary of the causes of Fatigue in cycling competitions
RACE DISTANCE CAUSE OF FATIGUE
200m-500m PC depletion
Reduction in rate of anaerobic glycolysis 1km-3km Muscular acidosis
Pain tolerance 4km-50km Muscular acidosis
Pain tolerance
Aerobic capacity
Glycogen depletion
Delaying Fatigue
The time spent on training to increase muscular the concentration of PC in the muscle is disproportionate to the actual increase
obtained (if any). Time spent on training for improvement of performance in 200m – 500m events should be spent on improving
power effectiveness in the pedal-stroke., i.e. strength and power improvements and the application of power through good
stroke mechanics. In addition time spent on developing the rate of energy supply from the aerobic glycolysis and also aerobic
capacity to underpin that development is recommended.
Improving the rate of anaerobic glycolysis, increasing the capacity of the muscle to buffer the effects and improving the cyclists
tolerance to the pain associated with lactate accumulation are all desirable outcomes of sprint training. We can improve the
cyclist’s ability to supply energy faster through anaerobic glycolysis by increasing the concentration of the related enzymes
involved in the metabolic reactions in the muscles.
The effects if improving aerobic capacity have been mentioned earlier. The main endurance condition is to reduce the rate of
lactate (and H+ions) production to delay the onset of acidosis and therefore fatigue. The more effective the body’s physiological
mechanisms are at getting oxygen to the working muscles and using it in the glycolysis pathways, the more efficient the system
will be for delaying fatigue. There are many mechanisms for making this system more efficient, and can be divided into central
and peripheral changes. Central changes involve improvements in the function of the heart and lungs, whereas peripheral
changes occur at the cellular level in and around the working muscles.
These are important physiological terms that play a massive role in determining specific training areas to develop certain
physiological adaptations in the athletes program. Importantly these terms are also absolutely critical in determining talent
scouting standards and even selection standards.
Having discussed the causes of fatigue and the physiological changes that need to take place in order for us to delay the effects
of fatigue, we are now equip with the information needed to detail the types of training needed to improve physiological
condition and therefore performance.
Fig.30. The Five main adaptations in training energy systems.
TYPES OF TRAINING and designing your training programme
The types of training used in cycling are related to the main energy system involved and the aspects of physiological function
that we aim to improve from an initial interpretation from an athlete’s test results. The key factor in each of these types is the
intensity at which the training is to be conducted. Blood lactate increases exponentially as exercise intensity increases and
therefore provides us with an ideal measurement scale to monitor and assess the different intensities of training.
Fig.31. Elements to create exercises
Olbrecht “the science of winning”
It is important to remember that all 3 energy systems operate together, although they contribute to energy release at different
rates. The 4 training types described above the solid line are used primarily for developing aspects of anaerobic capacity, with
the 4 types describe below the solid line are used primarily for developing aspects of aerobic capacity.
Table.15. training energy system intensity classification
Classification
Fuel Speed of
release
Duration Limiting factors Heart rate Lactate
(mmol/L)
System
recovery
Example
sets
Anaerobic maximal alactic ATP-PC Phosphor-
creatine PC
VERY FAST
10-15secs Lack of
PC+energy
release from
glycolysis
160-180
BPM
3-5
50% -30s
75% -60s
88%-90s
94%-2’
100%-3
10x200m
Anaerobic maximal lactate production Glycogen FAST 40-90secs Lactate 180-200 8+ 1-2hours 8x500-
750m
Race practice Glycogen FAST Variable Lactate 190-200 12+ 1-2hours 3x1-2km
Anaerobic lactate tolerance Glycogen FAST 1-3minutes Lactate 190-200 10-14 1-2hours 5x2km-
3km
Aerobic overload (vo2max) Glycogen
O2
Medium Medium
15mins
Lactate+glycogen
depletion
180-200 7-10 variable 8x2km
Anaerobic threshold
Aerobic maintenance pace
Aerobic warm-up + recovery
Glycogen
02
Glycogen
02
FATS
Oxygen
SLOW
SLOW
VERY SLOW
Long
30mins
Long3hours
LONG-days
Lack of
fitness/glycogen
depletion
Speed of supply
from fats
150-180
130-150
130-150
120+
3-5
2-3
1.5
Variable
Variable
Variable
6x4km
8x5km
4x 20mins
Table.16. Energy system training fractions
Classification Rest Interval
Work:rest ratio
Duration Perceived exertion
%VO2max %intensity %MAX speed
Comments
Anaerobic maximal alactic ATP-PC 1-3mins 1:12 <3mins Not applicable
>150% 100% 100% FAST – active
recovery
Anaerobic maximal lactate production 500’s 1-3mins
1:4/1:5 3-5mins 18/20 very hard
>140% 100% 98% Active recovery
Race practice 30secs-2’mins
variable variable 18/20 very hard
500’s -140%
2km-105%
variable variable Active recovery
Anaerobic lactate tolerance 2km-3-5mins
1:2/1:3 4-8mins 19/20 very hard
110-120% 100% 95% Stress + pain,
passive recovery
Aerobic overload (vo2max) 30-60secs 2:1/3:1 +/-20mins 19/20 very hard
100% 100% 90% Stress- heart and
lungs – active
recovery
Anaerobic threshold Aerobic maintenance pace Aerobic warm-up + recovery
10-30secs 5-30secs 5-15secs
4km7:1/10:1 >6:1 >8:1
+/-30mins >30mins 20-120 minutes
16/17 hard 14/15 quite comfortable
<14 very comfortable
80-95% 70-85% 60-75%
80-90% 70-80% <70%
80-85% 70-80% <70%
HPA
Prep+aiding recovery
Classification – The main energy system used is given and the type of training
Duration – The time over which the type of training/energy system is most effective
Heart rate – Expected heart rate values measured in BPM
Lactate – Expected blood lactate values measure in mml
System recovery – Aerobic categories depend on the intensity of the set, and could depend on glycogen replenishment
through eating.
Set duration – this means the actual cycling time. In the case of sprint cycling, the maximum cycling time is only
3minutes, but with rest intervals (ratio 1:12) the set should last up to 36 minutes.
Perceived exertion – Rating perceived exertion is a concept which was introduced by Borg in 1962 and updated as a
scale in 1970 (see Birk and Birk, 1987). The scale is between 6 and 20 and is designed to give an objective figure of
exercise intensity associated with the subjective feelings of the cyclist.
% VO2 max – Percentage equivalent of the maximal oxygen uptake. This value is used a reference in aerobic activities
to gauge the relative intensity of the exercise, and in anaerobic type activities as a reference to the speed or power
produced above VO2 max from anaerobic sources .
The knowledge base of physiology and training theory forms the basis for all physical training programmes in
competitive cycling. There should be no place for prescribing sessions ‘off the cuff’, or arriving at number for set design
without a clear plan for long term development and without creating the training set from first principles. In the
preceding sections, we have covered the physiological processes with which the bodies react in exercise conditions. we
have also touched on how we should best train these energy systems and discussed which guide the training in view of
short, medium and long term development.
Armed with this information, we are now able to look at in more detail at the factors which limit performances and
therefore the boundaries which we need to move back or aspects we need to improve. Recommendations for
categories of training will be made, the criteria for set construction stated and example designs and types of training
listed.
Constructing cycling training sets
The knowledge gained from the characteristics relating to the energy systems and the tupes of cycling training gives us the
information needed to construct the training sets – the numbers and distances – within each training unit (session).
Criteria for endurance maintenance
Set distance 30km’s – 90 minutes for elite cyclists
Repeat distance – longer distance are preferable
Intensity: light: short rest intervals
Speed is individual based on test interpretation and is conducted using srm/watt- cadence and time.
Example set for track cycling but can be easily adapted to the road:
6x 5km +power-cranks(track type) and SRM – tempo regeneration – 0ptimal cadence 100-105rpm – optimal gearing
cross-check with watts interpretation to lactate mml. 5mins easy riding between sets or passive rest.
Criteria for threshold endurance set construction
Set distance 20km’s – 90 minutes for elite cyclists
Repeat distance – distances from 1km-2km-3km -4km
Intensity: maximum even pace for the duration of the set. Lactate steady state
Speed is at individual anaerobic threshold based on test interpretation and is conducted using srm/watt- cadence and time.
Example set for track cycling but can be easily adapted to the road:
5x 4km SRM – tempo threshold – 0ptimal cadence 123-125rpm – optimal gearing cross-check with watts interpretation
to lactate mml. 5-10’mins passive rest.
10x2km SRM – tempo threshold – 0ptimal cadence 123-125rpm – optimal gearing cross-check with watts interpretation
to lactate mml. 3-5’mins passive rest.
Criteria for endurance overload set construction
Set distance 15km’s – for elite cyclists
Repeat distance – distances from 1500m-2km-3km -4km
Rest intervals: 3-5’
Intensity: fastest possible average throughout the set and above threshold pace -
Speed is at + individual anaerobic threshold based on test interpretation and is conducted using srm/watt- cadence and time.
Example set for track cycling but can be easily adapted to the road:
5x 3km SRM – tempo threshold – 0ptimal cadence 123-125rpm – optimal gearing cross-check with watts interpretation
to lactate mml.
10x1500m SRM – tempo threshold – 0ptimal cadence 123-125rpm – optimal gearing cross-check with watts
interpretation to lactate mml.
Criteria for lactate tolerance set construction
Set distance 15km’s – for elite cyclists
Repeat distance – distances from 500m - 1km -1500m-2km
Rest intervals: 4-6’ between longer repeats and 30secs – 60secs between shorter repeats
Intensity: Maximum very painful and stressful
Speed is as fast as possible (95% of season’s best)
Suggested mileage per/week: 15km-30km depending on cycle stage in planning
Example set for track cycling but can be easily adapted to the road:
7x 2km SRM – 0ptimal cadence 123-125rpm – optimal gearing cross-check with watts interpretation to lactate mml.
2x5x1500m SRM – 0ptimal cadence 123-125rpm – optimal gearing cross-check with watts interpretation to lactate
mml.
10x750m MAX effort -
Criteria for lactate production set construction
Set distance 8km’s – for elite cyclists
Repeat distance – distances from 500m – 1km
Rest intervals: 50secs passive/road and active track between broken efforts 10-15mins between sets
Intensity/speed: Maximum and faster than race pace.
Suggested mileage per/week: 4km-8km depending on cycle stage in planning
Example set for track cycling but can be easily adapted to the road:
2x 2km SRM – 0ptimal cadence 124-126rpm – optimal gearing cross-check with watts interpretation to lactate mml.
4x 2000m(4x500m with 500easy between each effort) broken sets ( SRM – 0ptimal cadence 126-130rpm – optimal
gearing cross-check with watts interpretation to lactate mml).
Criteria for sprint speed set construction
Set distance 1-2km’s – for elite cyclists
Repeat distance – distances from 125-250- including standing starts and flying starts
Rest intervals: 60secs to 5mins between sets
Intensity/speed: Maximum and faster than race pace.
Suggested mileage per/week: 4km-6km depending on cycle stage in planning
Example set for track cycling but can be easily adapted to the road:
2x 4x 125m SRM – 0ptimal cadence 150+rpm – optimal gearing cross-check with watts interpretation to lactate mml.
2x3x 200m (SRM – 0ptimal cadence 126-130rpm – optimal gearing cross-check with watts interpretation to lactate
mml.
Fig.32. Example of training the aerobic maintenance. Track session in team pursuit formation
Fig.33. Example of aerobic endurance training set with four important power climbing endurance prior to the main set.
Fig.34. Example of training the aerobic endurance. Road session with long regeneration accent.
Fig.35. Example of Aerobic power set. Track session in team pursuit formation.
Fig.36. Example of Aerobic power set. Track session
Fig.37. Example of aerobic power in a race. With solo win.
Fig.38. Example of anaerobic capacity training sets.
Tolerance
Fig.39. Example of anaerobic training sets.
Fig.40. Relationship between different training classifications. Jonathan Wiggins West-consultancy Topsport trainer Jon Wiggins
WBV 2008
Understanding and speaking the same language regarding lactate tolerance and lactate production
Regarding lactate production and lactate tolerance. Both are very important for track cyclists, prologue specialists and shorter
time-trial specialist events. For these types of athletes it is important for them to be able to take the race out fast but also have
the trained buffering capacity, so that they can maintain their speed without dropping off their race pace.
WHAT is lactate tolerance?
Lactate tolerance primary effects are;
Increase muscle buffering capacity
To improve the ability of the cyclists to maintain good technique and speed inspite of severe acidosis
Improve the ability to tolerate the pain of acidosis
Lactate tolerance secondary effects are;
Increase the muscle concentration of glycogen, ATP and CP
Increase a rate of lactate removal from muscles and blood
Also this type of training will increase VO2MAX because it stimulates the oxygen consumption mechanisms of FTb
muscle fibres.
WHEN?
Adaptations occur rapidly and buffering capacities will occur within 4-6 weeks. This type of training is importantly placed in the
periodic planning initially in small amounts and gradually the amounts are increased towards the major goals of the season.
WHAT is lactate Production?
Lactate production primary effects are;
Increase the rate of anaerobic metabolism
Lactate production secondary effects are;
Increase in the quality of ATP and CP stored in the trained muscle fibres
Increase the recycling rate of ATP with CP
Increase muscle power
Increase in neuromuscular coordination at fast cycling speeds
Increase in buffering capacity
When?
This type of training is done is most parts of the training cycle. This is important to increase and maintain the anaerobic
metabolism especially towards the start of the build up process. In this type of training the amount of glycogen lost will be small
because the length of each repeat and the distance of the sets are relatively short. Muscle damage should also be minor.
This type of training is vitally important for not only track riders but also for climbing specialists. Climbers need to develop this
type of leg speed training accents to develop the fast cadence turn over and develop and solid anaerobic metabolism which will
in turn compliment their aerobic capacity base and subsequently climbing speed.
PART 3 Testing, Monitoring and Evaluation 3.1 TESTING
1.1 Introduction
Why do we test?
Testing is really important to establish a monitoring of changes in athlete’s physiology, training status, fitness,
mental and nutritional state.
(Fitness testing is to systematically monitor changes in physiology over time)
It is common within the professional cycling teams to see athletes with stalemate situations regarding their
physiological state. This is a problem, and here we will determine the importance to test regularly and instigate a
correct systematic planning to produce the maximum potential from an athlete. Also understanding the athlete’s
individual state in digesting a heavy workload and develop an important back up of test knowledge/references that
will steer the athlete correctly to their goals. (No more flying by the seat of your pants)
By testing, we identify the overall ability of the athlete in each of the aspects that affect cycling performance
objectively. By doing this the coach has a greater confidence in the construction and evaluation of the training
programme. (“Is it working, and if so, by how much?”).
In order to construct tests that will give meaningful information to the practising coach, appropriate criteria must be
applied to give us a valid (true) measurement of a particular component. For instance a timed 20km (80laps) will give
an indication of aerobic capacity. If the test is altered to 5km or 5x1km, this will reduce the validity of the test by
increasing the contribution of other factors (such as power and sprint ability) to performance.
One important factor to consider is the accuracy of the test. When human error is taken into account, how close to
the real measurement is the value obtained? This is most commonly illustrated in cycling when comparing hand-held
timing in training to the electronic readout. A selected test has to reliable. The test needs to be repeated under
exactly the same conditions, will the result be the same or similar? The more difficult or complex the test is to
conduct, usually the less reliable (or repeatable) it will be.
What testing can do?
1. Results can give us an indication of an individual’s strengths and weaknesses in each physical/physiological
component, and in relation to the cyclist events.
2. Provide a baseline for individual training prescription
3. Testing provides a monitoring tool to assess the effectiveness of the training programme for an individual
cyclist.
4. It can provide us with general information on health status
5. As an education process, it provides the cyclist with information about their performances in relation to each
of the components of physical fitness
6. It can provide the coach with knowledge – both generally and with respect to individual responses.
7. It can be a vital indicator towards selection processes and talent identification programs.
What testing cannot do!
1. It should not be considered a training aid
2. It is difficult to predict potential for improvement. Everyone has limits.
3. Tests, even when constructed well, still have to be related back to cycling performance in a given
event which can sometimes have limitations.
4. Other non-physiological factors affect performance, e.g. technique, sociological and psychological
factors, tactics and skill.
The following section will consider the most important physical and physiological components which contribute to
performance and offer several tests of each in order to obtain information which to assess and evaluate the training
process more objectively.
1.2. Type of tests
What type of tests, are we crediting and why? The global concept
Before any testing is commenced, it is important for all coaches/trainers to establish the correct testing protocol for
the athlete. This will govern the expected results regarding to energy requirements of their particular event.
1.2.1 Check points environmental control:
Correct test temperature,
Correct bike position, optimal positioning
Correct gearing//simulation
Athlete controls:
Fit, no illness or injury
Rested state, no competitions or heavy trainings at least 2-3 days before
Be fully regenerated nutritionally
Light warm-up program
Testing equipment should be familiar
List training, diet and environmental conditions, which could determine certain result evaluations and
interpretations.
1.2.2. Characteristics determining type of test protocols
The physiological characteristics governing cycling performances
Scientific references determine that a high maximal oxygen uptake and peak aerobic power output may prove
beneficial to endurance performance. In conjunction with this is the ability of a well trained athlete to sustain a high
economy of motion.
The optimal test results demonstrate that top athletes are using the least amount of oxygen possible to produce the
highest work by the muscle.
What is also very important to remember that next to these extreme performance measurements of outstanding
physiological abilities, many cycle races are governed by sprint finishes. This indicates high speeds and high acidosis
indicating anaerobic power and capacity.
With all these points taken into consideration it is clear that not just one sort of physiological test could correctly
profile the athlete’s characteristics.
1. Determining the maximal characteristics
Maximal oxygen uptake (Vo2max). The ability for the athlete to extract oxygen, to deliver it to the working
muscle, and use it to combust fuel. The more oxygen that can be used for oxidation, the greater power the
muscle can produce.
Peak aerobic power (WMax) very important measurement that is used together with the VO2max
calculation.
VO2max importance in result interpretation;
o Absolute – total oxygen consumed per/minute. Important in determining short maximum anaerobic
disciplines, with a high absolute measurement.
o Relative-Oxygen consumed per/kilogram of body weight per minute. Important in determining
athlete responses to longer distances governed by the aerobic energy systems.
Wmax/BM. This is vitally important to determine the correct profile of an athlete be it for example climbing
or track sprinting.
2. Economy
Oxygen cost to work at a given intensity
Biomechanical efficiency, oxygen cost to work at a given intensity will fall.
As endurance training status increases, the delivery mechanism transferring oxygen to the working muscles
will become more effective and economy will increase.
This is very important for time-trialists and pursuit riders on the track. To test this efforts of 3 five minute
intervals at a fixed intensity for example 40kph, Vo2max and heart rate (watts, cadence and optimal gearing
) would be tested to evaluate the oxygen cost at a given power.
3. Blood lactate threshold
Blood lactate threshold is a very important indicator for economy assessments and being able to interpretate
training energy zones.
The testing protocols can vary using lactate values as an assessment of lactate threshold. Mainly standard hyperbolic
ergometer tests are performed to maximum. The blood lactate profile is recorded and the individual point of
threshold is measured. This is done by taking blood samples (preferably from the ear as this is most accurate method
of realising lactate enriched blood. The point where lactate begins to rise faster than workload indicates a transitory
threshold.
4. Time trial ability
Laboratory based time trial tests. These tests are important for establishing correct cadence economy and sustained
power for longer time-trials. However you need very motivated athletes to perform these tests accurately
5. Anaerobic power and capacity
This is a crucial part of any energy system economy for road riders, track racers and mountain bike athletes.
The test protocols can vary for this but largely wingate type simulations are profoundly used to determine anaerobic
power and anaerobic capacity.
6. Threshold and aerodynamic track
The best attribute for testing in an indoor track is that tests are carried out in a controlled environment. So step tests
or aerodynamic tests are widely used to create an economical profile for endurance athletes.
Beep tests can also be used to create an estimated reference point of fitness. This is a method used for screening or
working with younger athletes.
7. Threshold Field based tests
This is slightly more difficult due to environmental factors. But these tests are mainly targeted towards time trial
economy and reflect sustained power/ cadence and gearing profiles.
8. Maximal tests
There are many test protocols to determine maximums, be it for sprinters or endurance athletes. The main objective
for this test is to record the W/MAX and cadence peaks in relationship to gearing. Lacate can also be used to
determine anaerobic peaks.
9. Sprint tests
It is important to develop a protocol that stresses the maximum peak watts. A series of sprints from standing starts
are required to record accurate sprinting ability. Tests can be performed in a lab, hill climb or track environment,
depending on the athletes specific needs for training or racing goal interpretation.
10. Body composition testing
Balancing the size of the components which contribute to the composition of an athlete’s body is one of the most
important considerations in physical performance. The significant components in athletic performance are lean body
mass (the quantity of muscle) and body fat (total or percent of fat). Lean body mass will to an extent determine the
power and force a cyclists can exert through their cycling technique. Fat within the body is essential for cell
membranes, connective tissue and protection.
A certain amount of fat is necessary for healthy body functions, but excess amounts will probably be a hindrance to
physical performance. The ability to monitor changes in body composition therefore is essential in ensuring that
maximal performance potential is achieved.
Body fat values such as 10%-18% for females and 3%-8% for males have been proposed for cyclists. Many endurance
athletes have been recorded with body fat as low as 9.6% for females and 4.6% for males (Troup et al 1986). Despite
the obvious benefits of carrying less weight, many problems may arise from having a body fat that is too low. Low
values suggest that there is a large energy deficit (more energy being expended than taken in through the diet)
which will indicate inadequate nutrition and or a high volume training regime / race program.
In cycling it is the norm for high volume training programmes, and therefore the nutritional intake must be adequate
to support this physical stress. If the calorific intake is not sufficient to match the energy expenditure, then the
cyclist will be in danger of falling into a state of overtraining. In addition, with many of the body’s immune systems
stretched to their limits, there will be greater susceptibility to illness and injury.
Methods of assessment.
1. Weight measurement
The measurement of weight is an essential factor in assessment of body composition, and although coaches
should rely on regular monitor changes, the values will not give an accurate picture of the changes in body
composition. For instance, it is often valuable to see an increase in body weight as an indication of natural
growth and improvement in strength from an increase in muscle size. An increase in body weight can
therefore be a positive effect. Conversely, a sudden drop in body weight can be detrimental to performance,
and may be a sign of overtraining. Regular measurement with the same, accurate scales is recommended as
a basic monitoring tool.
VISIO CONTROL is a luminous indicator that shows the weight evolution at a glance
Fig.41. weight/body fat measuring instrument
4 memory bases for 4 different users
Gives weight and fat mass in Kg
Fully electronic 4 micro-sensor technology gives unrivalled accuracy
Displays your own personal min/max limits (fat mass)
2. Skin-fold measurement
One of the most frequently used techniques for the assessment of body composition and body fat is skin-
fold measurement. The relative ease of testing: sites of skin-fold measurement are easily accessible, the test
is non-invasive, equipment is relatively inexpensive and the testing time is not prohibitive.
Measurement involves the use of skin-fold callipers in recording the thickness of selected subcutaneous fat
store sites. Estimation of body fat is made from equations relating percentage body fat to skin-fold
measurements. The assumption made in this technique is that internal fat stores are the same as or
proportional to external stores. Usually, the validity of the measurements is tested against the gold standard
underwater weighing technique. Skinfold tests should be carried out every 2months. With regular body
weight and composition assessments on a daily base
Fig.42,43 Hydrostatic weighing Kul Leuven De Ketele 2007
Fig. 44-50 Skin-fold Measurement techniques
fig.44 Triceps
fig.45 Sub-scapular
fig.46 Supra-iliac
fig. 47 Abdomen
fig. 48 Front thigh
fig. 49 Chest (men only)
fig. 50 Rear thigh (female only)
Other measurement techniques
Body mass index (BMI) is a simple method to compare body size between athletes. The technique gives more
information than weight measurement, although the degree of obesity or leanness cannot be determined on an
individual basis. For example, a small heavily muscled man which is very lean, may have a high B.M.I due to the
weight of the muscles, and would be described as overweight.
Hydrostatic weighing is generally considered the ‘gold standard’ for body composition assessment (Durnin and
Womersley 1974). It is the most accurate measurement technique at present. The test is based on the Archimedes
principle.
Anthropometry (measurement of body dimensions), infrared, bio-electrical impedance and clinical testing with more
complex equipment such as X-ray, nuclear magnetic resonance, ultra-sound and isotope measurement are used in
medical tests and research but are very time consuming and expensive.
However in this course we will take a very in depth study in infra-red 3-D dimensional assessment of body
composition in the form of bike fitting. This will prove to have massive ties with our next title over flexibility.
1. Flexibility
The most common and frequently used test of flexibility is the ‘sit and reach’ test which require the athlete to sit
with legs extended and push a marker as far as possible towards and beyond their feet. This test will give an
excellent indication of hip flexion.
The accuracy of the test can be further monitored in developing the athlete profile using the 3-d retul bike fitting
tool. Here the range of hip flexion is apparent and a critical indicator towards potential aerodynamic improvements.
The importance here with this tool is that both sides of the athlete can be accurately recorded.
Again this tool can be used in both accurate measurement of the foot flexion and extension and also the upper body
elbow and shoulder flexion.
2. Strength
A simple definition of strength would be the maximum resistance that an individual can overcome. However, there
are several considerations and assumptions made within the statement. Strength is specific to the movements made
and the muscle groups employed. For example, a cyclist may be very strong in the quadriceps allowing large
resistance to be overcome in the downward sweep of the pedal action, but relatively weak in the latisimus-dorsi
muscle resulting in a limitation in low maximal resistance being overcome in a lat pull down exercise. There are many
different movements and joint angles which may be measured for strength, just in flexibility, and ideally those
movements which mimic cycling actions most closely should be chosen.
The most simple of strength tests is the one repletion test adopting a standard piece of gym equipment such as the
leg-press machine. In order to achieve greater specificity, this may be done with one leg. However we will steer
towards more accurate testing in this course and strength training testing with more repetitions is understood as a
more refined test protocol.
More complex measurements of strength and once again the identification of imbalances can be made with
expensive equipment called isokenetic dynamometers. The most frequently used brands are cybex . These
measurement devices can be extremely accurate and give valuable information, but are time consuming and
complicated to operate.
Despite the contribution of strength to sporting performance, its relationship to successful cycling is poor especially
towards endurance cycling. This is most probably due to the fact that although resistances are being overcome,
there is no consideration in strength for how quickly the resistances need to be moved. In cycling as in other sports,
fast dynamic movements are required for success. This is a main reason why with Elite cyclists we work specific in
general fitness using smaller weights but with more specific and higher frequency efforts.
3. Speed
Speed is a true indicator of any cyclist’s peak conditioning and both endurance riders and of course sprinters work
closely on developing these speed skills. If it is true maximal cycling speed that is sought, distances should be chosen
which are short enough to prevent the influence of fatigue. So training the correct energy source is critical in
establishing the speed efforts. Many coaches will use the standing start 125m efforts. This will give an indication as
to a cyclist’s pure sprint ability, although the influence of the start will also contribute to performance in this test. A
more valid test of cycling sprint speed can be achieved by using SRM – POWER – CADENCE and marking out a set
distance to record the highest possible sustainable top speed.
3.2 Monitoring and Evaluating
4. Power
What is power? The physics definition of power reads: Power (watts) = Force (Newtons) x Distance (metres) Time (seconds) In words: Power is how fast you can do work. Force is pushing or pulling a mass, body, or object. Distance is how far that mass, body, or object is moved. Time is how long it takes to move the mass, body, or object. In other words, powerful movement is a dynamic movement that occurs across multiple Joint’s with great acceleration to high velocity with proper technique. Power applies to all movements in all sports. The concept of power can be applied to all energy systems. NOTE THAT STRENGTH DOES NOT = POWER.
How do you develop more power? There are 3 variables to consider when considering how to develop more power. These variables are drawn from the original formula for power (P = F x D/T). The three variables are: Force Distance Time Improvements in any of the three variables (more force, greater distance, less time) can result in increased power, as long as there are not decrements in the other variables. More specifically we can seek to have an athlete: 1. Move a mass, body, or object faster, i.e., apply a force faster. w/kg 2. Move a bigger (greater mass) mass, body, or object at the same speed, i.e., apply more force in the same time.
5. Move a mass, body, or object farther in the same amount of time. An example of how this applies is the vertical jump (a common test for power). The athlete can be said to have improved their power if they can; 1. Jump to the same height in less time, 2. Jump the same height in the same time carrying a weight. 3. Jump higher in the same amount of time.
Fig.51 Power pyramid model (Skinner 1980)
Power is the product of strength and speed and is very highly related to success in sprint cycling performance. There
are many different test types that can give us an indication of power, most common test protocols are performed on
the SRM ergometer. This is by far the most accurate ergometer and tests such as the wingate for sprinters or a
hyperbolic step tests for endurance athletes can be performed and should be performed at a regular base
throughout the year.
This feat of power measurement was achieved with the aid of small strain gauge strips mounted between the inner
and outer rings in the crank. Power is transmitted from the pedal to the chain and rear wheel and thus to the road
via the inner ring. The more powerful the force on the pedal, the more the strips deflect and the more the electrical
resistance measurement changes. The little computer on the handlebars calculates the power in watts from the
torque and the cadence. The most important detail of this invention: no energy is lost through the measurement.
This is exactly what makes the system so important for professionals because, of course, they can tolerate no loss of
energy while performing.
1.2.3 Where to Test
a) FIELD TESTS
b) TRACK
c) ERGOMETER LAB
The SRM Training System saves and shows the following values on the Powermeter display:
Power Heart rate
Cadence Speed Riding time Riding distance Temperature Energy consumption All average and maximum values An unlimited number of training intervals Training times in any training zone settings you like
Keep our focus at present to the power principle. Several measurements of force output can be considered in either lab tests or field tests using SRM. Peak force can give us a maximal power relationship. Alternatively, 30second wingate test can give us an indication of anaerobic capacity by measuring the toal work carried. For comparative purposes the mean force output can be considered, and as an indication of endurance or sprint ability, the fatigue index is important.
Torque analysis (analyzing difference in leg and right leg efforts) is also critical in understanding weaknesses and the SRM ergometer can once again be used for making strength adjustments or in combination with the 3d retul in positioning adjustments to realise adaptation in power output or aerodynamics.
1.3 Practical test protocols Wiggins
Fig.52 – test facilities Wiggins. Standard hyperbolic Test protocol
SRM Ergometer - hyperbolic test (power constant)
Key Features Specificationspoint of reference: bottom bracket center)
Fully adjustable: saddle position and handlebars can be adjusted to any position for cyclists
Between, 4' 7" and 6' 7" – from a racing position down to a relaxed upright position.
Saddle position, horizontal adjustment ± 21 ½” - 33 ½”
Saddle position, vertical adjustment range ± - 6” - 4”
Handlebar position, horizontal adjustment range, middle of stem ±17 ¾” - 25 ½”
Handlebar position, vertical adjustment range, middle of stem ±13 ¾” - 23 ½”
Weight 220lbs
Eddy current brake driven by a toothed belt, damped bedding
Service voltage ±30V DC
Flywheel mass with a changeable mass. Can be adjusted to the test person’s weight via gear-box (Gear transmission ratio) and weights. Body weight from 110-220lbs
Braking power (short-term; sustained) 4000Watts; 2000 Watts
The athlete’s power is measured with the SRM Power-meter Professional on the bottom bracket and with the SRM Power-control. The data gained with this kind of power measurement is not affected or distorted by the Eddy current brake or by mechanical parts of the gearbox. The athlete’s power is measured directly at the point of output, on the cranks. You will find more details in the technical information of the SRM Training System.
Crank length (SRM multi-length crank) Adjustable from 150 - 190mm in steps of 2.5mm Simultaneous transmission of data to PC via serial interface yes, RS232
Pedaling torque analysis included
Ergometer Software. The Ergometer is programmable with a self-created ergometric data
Power or cadence. It is possible to change between these two ergometric modes during operation minimum
constant for 1 second. Adjustable flywheel mass operation with an air
resistance of a simulative brake force power regulation depending on performed cadence or speed
Technical Data for SRM Ergometer.
Possibility of data evaluation/data download (SRM Windows software required for this), Data evaluation is analogue
to the data evaluation in mobile operation - Marking of power ranges, saving of all power data with additional
information, data monitor or printout graphic, tabular, statistically, zoom function, data export as ASCII file Settings
on the PC monitor included System requirements IBM compatible, RS232
MAX effort test - HYPERBOLIC MODE: for step and ramp tests and tests that keep power
constant over a longer period of time. The cyclist can determine his optimum, individual cadence. The Ergo-meter keeps the resistance constant. The Ergometer is equipped with a flywheel mass that simulates (m/2 v_) the athlete’s kinetic power while riding. As the power setting is independent of the athlete’s cadence, he can choose the rpm that suits him best. Resistance – elite test start 90watts – steps are 20watts per/3’minutes to max. Cadence - +90rpm-105rpm Lactate – measurements are taken by capillary tubes and measured using lactate pro-
Fig.53. Hyperbolic test
Wiggins. Test protocol SRM ergometer VWEM LAB. optimal cadence/watts Men.
Protocol:
Warm-up 10minutes to threshold.
Flywheel mass calculate w/kg -
15-30 second 130RPM 200watts
15-30 second 130RPM
15-30 second 130RPM 200watts
15-30 second 130RPM
15-30 second 130RPM 200watts
15-30 second 130RPM
3 -lactate measurement – direct, 7,5min, 12,5min
Conclusion/Evaluation 1. Standing start evaluation – power/output 2. Adaptation and simulation for team pursuit 15second sprints met 130 RPM 3. Watt, W/kg en Cadence report. 4. Lactate analyse
Why and When? 1. Used for screening program for team pursuit 2. Realistic all round picture of optimal cadence and watt output. 3. Athletes can be steered correctly from anaerobic evaluations. 4. Evolutionand screening indicators. 5. The test can easily be performed in preparation before major competitions or assessing.
Fig.54.a cadence test
108111114117120123126129132135138
700 800 900 1000 1100 1200
RP
M
WATTS
Peak watt cadence test + average cadence in the wingate test
KIM
Jasper
Robin
Billy
Boris
Boris V
Steve sch
fig. 54.b
Cadence test and wingate correlation.
The graph demonstrates the importance of watts generated through cadence. This is important to
screen young athletes for neuro-muscular indifferences. Co-ordination and high muscular output is of
importance in distinguishing pursuit riders....
fig. 54.c
Cadence test specific towards time-trialists.
WIGGINS WINGATE adaptation The aim of this test protocol is;
To describe external power output characteristics during the wingate test
To examine changes in blood lactate concentration
Protocol:
1. Blood lactate at rest
2. 5’ minutes warm up with a 5second sprint at 3minutes, followed by 5minutes passive rest
3. 3’ minutes 100rpm with supported resistance
4. GO – MAX effort the load is applied (7,5% of body weight regarding flywheel mass and
eddy current braking system), athlete explodes and rides full out.
5. The test protocol is 30seconds in duration.
6. End of the test is 2’ easy cycling at 100watts
7. Three blood samples1.Immediately after effort, 2. 7,5minutes and 3. 12,5minutes.
Fig.55. wingate simulation
Endurance testing
The measurement and monitoring of endurance is probably the most important and frequently tested aspect of
physiological conditioning. Many different tests have been used, the simplest of which is a straight cycle against the
clock. The 20km endurance test. More developed field test is the step test WIGGINS2006. Here the athlete rides a
fixed gear on the track and rides progressively to the last step which is MAX. The complete test protocol is as follows;
7x2km step test Wiggins 2006. Athletes use track bikes with disc wheels and . Start time is 35seconds above the
athlete’s personal best standing start 2km time. The gearing is decided on the athlete’s optimal gearing from the
3km individual pursuit. Each 2km is ridden 5seconds faster than the previous step which works out at roughly 0.5 of
a second faster per/lap on a 250m track. After each step the lactate is taken and the step turn-around time is
5’minutes. At the end of the last maximum step the tests results are interpretated using SRM and lactware.
Fig.56. Hyperbolic test
Fig.57. Aero-test
7x 2km STEP TEST protocol
Fig.58. Track step-test
Planning and test results
Table 17. Step test results
Cycle step test 2000 # 1 2000 # 2 2000 # 3 2000 # 4 2000 # 5 2000 # 6 2000 # 7
Time (# seconds / 2000m)
163,14 159,28 155,18 151,24 147,46 143,44 129,03
Velocity (m/s) 12,26 12,56 12,89 13,22 13,56 13,94 15,50
KPH 44,13 45,21 46,40 47,59 48,81 50,18 55,8
previous time 02:38.94 02:39:28 02:35:18 02:31:24 02:27:46 02:23:44 02:09:03
previous watts 233 248,90 267,00 283,00 310,00 329,00 445,00
Watts 240 259 276 289 312 337,8 444
Lactate (mmol /L) 0,5 2 2,2 2,4 3 4,7 15,6
Fig.59. Track step test SRM graph .
7x 2km step test The step test is designed to;
Create a reference point evaluating the current condition of the athlete
Enables us to calculate accurately the training times in their specific energy zones
Enables us to accurately steer the athlete with reference to their capacity or current health and fitness.
Enables us to screen the program resulting in a categorising of athletes
Enables us to confirm track specific selection criteria for major competitions
Enables us to identify crank issues and gearing
Result interpretation. There need s to be more particular attention paid towards working with these test results from the coaches. For team pursuit there needs to be a balance and the riders quite often need individual accented training to steer them in the right direction, so that the team comes together as one. It is not a correct theory to approach the training camps with only team pursuit programs. Technically there is importance to be drilled but this is an area that our riders are strong. The areas that need to be worked on are the tapering phase of the individual. The specific energy system needs to be ready for the team pursuit effort.
Maximum Power Test
This test is to evaluate the athlete ’s short-term muscular power. Ideally the test should be short(6-10’s).
Standing starts are implemented in the protocol using the SRM ergometer.
Important variables from this type of test are both the maximal power and the optimal cadence for
maximal power. As both of these variables are integrally linked by the force -velocity relationship of the
muscle they cannot be considered in isolation and play an important role in protocol design. The
resistance chosen for the test must be large enough so that the peak cadence does not limit the maximal
power and not so large to limit the cadence to unrealistic values.
The best solution for this test protocol is to use the SRM ergometer in open ended test mode which will
provide a braking force which has a cubic relationship with speed, mimicking the effect of air resi stance
on a moving bicycle. The resistance is set on gear 9 because of the high cadence and high power -output
to be achieved in such a test.
The athlete is asked to start with the cranks in a position that they can obtain a maximum energy
potential from a seated start. The test duration is seated and the athlete is requested to achieve his or
her max cadence and power in the 6’s.
After 3min of active recovery the test should be repeated and the best test from the two should be used.
fig.60 SRM ergometer
SRM File!
Resistance unit and gearbox The brake in the ergometer is an eddy current brake, which provides resistance by creating an electromagnetic field through which a metal disk runs. The resistance of the brake is a function of its angular velocity and the current supplied to it. The ergometer gearbox contains two fixed stages of gear reduction, which results in an increase in speed of the brake. This has two operational benefits: 1. The braking force of an electromagnetic brake is a direct function of its speed. Increasing the speed decreases the current required for a given resistance. A lower current prolongs the life of the power supply. 2. The gearbox contains user-changeable fly-masses to recreate the kinetic energy of riding on the road in the lab. The range of outdoor conditions that can be duplicated with a given size of fly-mass is increased at higher speeds.
To maximize ergometer life, the gear selector switch should generally be set on a higher gear rather than a lower one. As a general rule, when operating the ergo with power in excess of 300W (particularly at low cadences), the Rohloff hub should be set at gear 9 or higher. For ergometers with a Shimano Nexus hub, gear 4 or higher should be used. Conversely, when operating at very low power levels, it is necessary to operate in a lower gear. The drivetrain and gearbox themselves provide an internal resistance, and even with the brake turned completely off; at a cadence of 90 rpm the power required is about 50W. It is not possible to regulate below this value.
PART 4. Bike fitting and Aerodynamics
The proper fit Jonathan Wiggins topsport trainer WBV2009-2010
Cycling involves a highly adaptable body and a semi adjustable mechanical device. The fit between the two is what
determines if the rider has a long term cycling career without a lot of injury or aching strains that after a time
prevent the athlete`s to perform at their best.
The most important aspect of bike fitting is that the athlete positioned and that it is an efficient position,
comfortable, energy conserving and can perform up to their potential but still prevent overuse injuries that are so
commonly seen by poor alignment.
Retul 3d analysis offers the analyser with an accurate tool. The athlete is harnessed through an infra-red tracker that
tracks the 3d image through to the computer software. Sending accurate data from anatomical markings from the
foot, knee, hip, shoulders, elbows and ends with the hands. The system flashes an LED every 2.1 milliseconds. That's
476 times per second or Hertz. The system takes a full set of body measurements every 34 milliseconds. That's 29
full sets of body data per second. Our sample sizes, taken dynamically, last anywhere from 5 seconds to 5
minutes....whatever the fitter desires. The software processes all of that data in seconds, synchronizing the eight
data points tracking them across longitudinal, vertical and horizontal planes.
Special considerations are taken for the road, MTB and track bikes. The retul data statistics give general guidelines
towards correct positioning. Certain aspects of individual positioning are needed to determine a proper balance of
power output and optimal aerodynamics.
In conjunction with the fitting analysis, data and dartfish media book. There also needs to be a measurement form
either written in the media-book and or written in a measurement logbook.
This serves as an important record for each riders personal data so future new bikes can be correctly matched.
A Difference in Leg Length
This is vitally important to distinguish leg length differences so that the athlete can be balanced correctly and the
pressure points in the foot and saddle correctly compensated for.
Is the femur shorter left or right
Is the tibia shorter left or right
In order to establish which part of the leg is shorter it is necessary for the athlete the assume the
hook lying position. Obvious differences are noted with knee forward to the other.
Also the legs are then straightened and heel to heel the feet are measured for leg length
indifference.
Foot with forefoot VARUS must press
down to meet the pedal, thus causing the chain reaction shown. Lower leg rotates inward, causing the Knee to move in towards the Bike Frame, in the pedaling downstroke.
RESULT: A repetitive side-to-side movement of the Knee.
The pressure point created between the foot & pedal.
The Knee follows a near vertical path, reducing Knee strain and potential for
injury. RESULT: A neutral foot position throughout the pedaling cycle.
The pressure point created between the foot & pedal.
Fore foot
Ball of the foot or metatarsals are directly over the pedal spindle.
The position optimises the leverage produced at the ankle.
If for example sprinters should place the ball of the foot slightly behind the pedal spindle. This
will generate higher rpm
Side to side
The foot should be set on the pedal so that the second toe is in alignment with the tibial
tuberosity.
If the foot is placed too close to the crank arm then the medial malleolus or inside of ankle may
hit the crank arm.
Then it is critical that the cleat is moved lateral away from the crank arm
If the rider requires a wider stance width than the cleat placement allows then the option of
using a washer on the pedal axle, next to the crank arm.
Proper canting of the foot on the pedal
Next to correction for foot instability by using correctly moulded insoles. It is vital to adjust the inward
tilt of the front part of the foot. This inward tilt is normal for all humans because it is used to flex
whilst walking as a shock obsorption. During cycling however the inward tilt is not necessary as the
foot is required to be more rigid. With inward tilt the problem from side to side motion or lateral travel
of the knee is highly noticeable. In order to correct this the foot needs to be brought up to a more
natural position.
The use of the wedges is here important to raise the foot and also correct the alignment.
Crank arm length
Correct crank arm length is traditionally estimated by measuring the length of the inseam of the riders
leg. Generally the following guidelines are advised before becoming more advanced in crank length
requirements.
79cm inseam – 170mm cranks
79-81cm inseam – 172,5mm cranks
84+cm inseam – 175mm cranks
Crank arm length increases the amount of leverage applied to the pedals. The higher the pedal
cadence the shorter the crank arm will need to be to govern the speed of the pedal.
Saddle height
Optimal saddle height should be set with a knee extension of 25-35degrees
MTB should be 5degrees lesser than road knee angle lesser to enable to compensate for a
raised center of gravity and this in turn will help to handle rougher terrain.
Saddle fore
This is crucial to determine the saddle pressure balance for different discipline. For example MTB and
specialised road climbers tend to set their knee tilt more behind the pedal axle and importantly for
pursuit and time trialist the knee is forward of the foot axle. (see uci regulations and retul standards)
To find the zero position you can use a lead weight and drop this down from the tibial tuberosity inline
with the pedal axle.
Saddle tilt and width
Most common is a level position
For time trialists and pursuit athletes the saddle is slightly lower so that the pressure point can
be easily distributed at the front of the sadlle because of the importance to high speed,
aerodynamics and larger gear ratios.
Trunk position
Aggressive positioning is more aerodynamic creating a flatter back for time-trialists and
importantly pursuit. Note the uci regulation restrictions of 75cm from the tip of the saddle to
the front of the aero-bars.
The flatter the back the more pressure can be maintained on the gluteal muscles and
hamstrings creating more control in the upstroke and more force in the downstroke.
Shoulder angle and elbow angle.
For road and MTB on upright or hoods the angle between the trunk and the shoulder should be
apprx. 9odegrees. The elbow angle here is commonly 15-25 degrees
For the pursuiters and timetrialists this angle is much more open as the forward position is
taken producing boxed frontal section. This creates a 90degree angle from the elbow.
Stem height
Stem height is for time trial and pursuit is optimalised through aerodynamics and the demand
on becoming more efficient. This is greatly determined on the flexibility of the athlete and also
the length of the event.
Handlebar or aero-bars are also importantly determined by event demands. For example the
faster the team rides in the pursuit the more importance there needs to be for drafting the
wider the bars will become creating more drafting for the riders behind. Also the faster the
pursuit the more oxygen consumption will be needed to realise the physioloigical demand, so a
wider position is more advisable. Also stability in turning and following the pursuit line is
greatly advantaged with a wider position.
Stem height for the road or mtb is greatly determined towards comfort.
Handlebar width is commonly determined for the road and mtb inline with the shoulder width
Handlebar angle
Commonly is the handlebar drop parallel to the ground. However many stage race riders opt for
a more aggressive drop and a more relaxed non aggressive top of the hoods.
The fitting check list 1. Frame seat tube size
2. Top tube size
3. Seat tube angle
4. Inseam length
5. Leg length
6. Which is shorter
7. Shoulder width
Athlete rides on tacx with watts and rpm measurement
Pedal alignment
Fore and aft position of cleats
Saddle height
Fore and aft saddle height
Fore foot position
Stroke view from front
Canting the foot
Side to side adjustment of cleats
Leg length adjustment
Cleat fore and aft position
Saddle height adjustment
Fore and after saddle positioning
Saddle tilt
Trunk angle and shoulder to elbow angle/ aggressive or non aggressive
fig. 61 Retul fig. 62.
Retul software analysis
Fig.63. Zin – frame geometry tool.
•
• 1e dot marker – 5th metatarsal head
• 2e dot marker – lateral malleolus – ankle
• 3e dot marker – heel –under the malleolus and level with the metatarsul dot marker
• 4e dot marker – knee – joint center of the knee
• 5e dot marker – hip – greater trochanter
• 6e dot marker – shoulder – placed on the head of the acromium
• 7e dot marker – elbow – lateral epicondyle
• 8e dot marker – wrist – center of the carpals
Table 18. Retul normative data
Aero-test
1.1 Resistance
POWER losses are to be taken into consideration when looking thoroughly to determine aerodynamics.
Mechanical energy is delivered to the rear wheel from the chain rings through the chain and
transmission.
Friction in the bottom bracket bearings, chain elements, and rear transmission consum es a small part of
this energy.
These mechanical components are continually being improved in quality through better technology and
in turn become crucial in obtaining lesser friction.
Rolling resistance; Energy loss is governed by casings of the tyres and thread construction. If we take a
look at the best quality track tyres these are thinner more flexible casings and made of very light weight
natural rubber with a slick tread.
Rolling resistance is also governed by the type of surface, wheel loading, tyre pressure, tyre diameter,
wheel diameter, tyre temperature, steering and acceleration. If we take a look at these potentials then
we can see that for track cyclists it is crucial to link these factors with gear ratio. Certain track types will
have a higher track resistance than other governing the gearing but importantly the tyre rolling
resistance will also determine the gearing to become smaller or bigger. Dynamic coefficients (crr²) of
0.05N X m X sec-1 (kyle1996)
Importantly this formula is brought practically into place by the understanding of the coefficients which
will steer the coach or trainer to look at the optimal cadence and wattage to finally determine a smaller
or larger gearing ratio.
1.2 Aerodynamics;
Cycling velocities exceeding 45kph have 80% of the total resistive forces on a cyclist bike and this is due
to aerodynamic drag. This is massive for performance athletes considering track cyclists are often s plit
between hundreds of a second.
Frame design is paramount for a good aerodynamics and after the Olympics from 2000 strict regulations
have been implemented so that super-bikes cannot be used. What has however been kept from this
superbike technology is important for understanding the airflow and resistances in cycling. Similar
technology to the formula one the frames have been made lighter stronger with carbon and titanium
becoming widely used by manufacturers. For example design technology has driven bike manufacturers
to the following scientific conclusions.
A round cylinder in an airstream creates a turbulent wake with a trailing low pressure region that
generates a high drag – The coefficient drag. For a cylinder if smooth is roughly 1.2resistant coefficient.
But with an oval airfoil in an airstream this creates a smooth surface with a minimal turbulence. >The
airfoil can have 1/10 th the drag of the cylinder given the same frontal area 0.1 resistance coeffi cient.
20-35% is stated to be the total aerodynamic drag on track pursuit bikes. The remainder is attributed by
the rider.
The athlete positioning is of ultimate importance to decrease the drag in relationship to the bicycles
aerodynamic potential. The standardised aero-test is performed on the track and the importance here is
to determine the velocity that this is standardized for all tests at 45kph. Measurements are recorded to
establish the efficiency in wattage and then alterations are implemented to try to create lesser drag co -
efficiency. Limitations to the ultimate pursuit or time-trial positions are;
Flat back position
A forward rotation of the pelvis
Forward positioning of the torso
Flexibility of the hip flexors and extensors
Within general top-athletes are looking towards aerodynamic gains of 30-50watts efficiency which often
in practice sees the athlete generating 1.2-1.8 kph improvement in a race situation.
0
100
200
300
400
500
600
700
20 25 30 35 40 45 50 55 60 65
Po
wer
Speed
Power - Speed
Fig.62. Aerodynamic test on the track – Realising aerodynamic potential but also
understanding the athlete’s power-outputs in relationship to speed to accurately
determine the team pursuit positions.
1.3 Material
Frontal projection, drag area of a 70kg in several common riding positions
Hand position Arm position Drag Area (cm3)
Standing Brake hoods 4.080 Seated Top of bars Straight arms 4.010 Seated Brake hoods Straight arms 3.240 seated Handlebar drops Bent arms 3.070 seated Aero-bars typical 2.914 seated Aero-bars optimised 2.680
Fig.64. There are typical differences in velocity resulting from the frontal drag being seated with hands
on the tops or in an optimal aero position. 1.1m/s , which is 4kph. Over a 40km time-trial this equates
to a 6minute difference.
0
2
4
6
8
10
12
14
100 200 300 400
Aerodynamic study
Optimal aero position
Hands on Brakehoods
The following table illustrates the differences in components which can aid a better power -efficiency.
Bike= Cervelo soloist at 45kph - tubes continental 22mm, 9bar
wheel Power(w) Power difference
Velomax 387 Lightweight 377 10
Zipp 909 352 35 xentis mark1 349 38
The following table illustrates the differences in rolling resistance regarding tubular qualities.
System-weight total 85kg
Tyre model Breadth Weight 30km/h 40km/h 50km/h
Dedatre giro d’italia 24mm 236g 26,4w 35,2w 44w
Vittoria open corsa evo
23,5mm 229g 27,1w 36,1w 45,2w
Michelin pro2 race 22,5mm 223g 29,2w 38,9w 48,6w
Vittoria pro rain 23mm 201g 30,6w 40,8w 51,0w
Michelin Megamium 2 21,5mm 257g 32,7w 43,5w 54,4w
Pariba revolution 23mm 211g 33,4w 44,5w 55,6w
Michelin carbon 22,5mm 241g 34,7w 46,3w 57,9w
Panaracer stradius pro
22,5mm 214g 35,4w 47,3w 59,1w
Schwalbe stelvio plus 23mm 332g 36,1w 48,2w 60,2w
Schwalbe stelvio front/rear
22,5mm 241g 39,3w 52,4w 65,5w
Hutchinson fusion 24mm 217g 39,6w 52,8w 66,0w
Continental ultra gator skin
22mm 215g 40,3w 53,7w 67,2w
Ritchey WCS race slick
22,5mm 252g 40,3w 54,7w 68,3w
Schwalbe stelvio 22,5mm 223g 41,0w 56,5w 70,6w
Specialized S-works Mondo
23mm 227g 42,4w 59,3w 74,1w
Continental GP 3000 22,5mm 220g 46,6w 62,1w 77,6w
Hutchinson top speed 22,5mm 208g 47,9w 63,9w 79,9w
Table 19. differences in rolling resistances for tubular tyres.
Fig.65 Air density and Temperature
Drafting in the team pursuit.
Fig.66 drafting in team pursuit aerobic capacity set from 5km
Athlete 72kg – AeC 300watts average – normal training spoke wheels with hp. 52x15 gearing cadence
average 126rpm. 1e pos. 497watts – 4epos. 261watts – 3epos. 244watts – 2epos. 327watts
1
1,1
1,2
1,3
1,4
-10 -5 0 5 10 15 20 25
Air density model
Air density model
kg/m
3
°C
Fig.67 race WB – team instability.
Athlete – 68kg – (51x14) AeP – race pace – 1030watts start – 1epos. 572watts(375m) – 4epos.327watts –
3epos. 346watts – 2epos. 434watts
Team pursuit maximum drafting potential.
1. Drag-coefficient – riding faster with four
2. Cylindrical form drag potential -
3. Broader aero-bars – more comfortable and less nervous, more accuracy
4. Athlete size
5. Athlete power-output
It is important to see that aerodynamics and lightweight technological advances affect cycling velo city.
For flat terrain and track pursuit, reductions in aerodynamic drag potential will produce proportional
increases in cycling velocity. So it is vital that minimising aerodynamic drag area, rolling resistance and
mass is critical for an optimal performance.
PART 5. Time-trial and Pursuit screening
Athlete characteristics, time trial, team pursuit and individual pursuit.
Screening is important to establish a trend in athlete profiles for time trial and pursuit.
We have previously taken a look at positioning and the importance of correct fitting and aerodynamics to
realise, efficient comfortable performances.
Next to this fitting comes a very important screening which should distinguish the physiological aptitude as a
time-trialist and or pursuit athlete. We have also seen the types of testing that we can do to realise a trend
in athlete capabilities.
The step tests prior to the training camps and at the end of training camps are important indicators that the
correct training intensities and fractions have been given to realize peak performances during the taper
phase.
Typical athlete trends for world-class pursuit screening individuals are;
Balancing the team – 6-8 riders all aerodynamically moulded, proportioned power/weight, height.
Vo2max 76+ for males and 60+ for females
High watts output +1200watts over 100-150m from a standing start
High cadence engine – 130+rpm on small cranks developing +600watts for:15second sprints. More
developed squads with larger gears and larger cranks – Leverage is then high in the initial screening
profile.
Trainable – aerobic capacity and aerobic/anaerobic power adaptations realizing sub 2:10 on 7x2km
on 5’mins step test.
SRM Ergo-meter tests 3’min/20watts +400watts - + frequent wingate SRM simulation to determine
the Anaerobic capacity and anaerobic fatigue.
Tracking performance evolution
wb man07 wkmal 07 wb la 08 wb cop 08 wk man 08
wk Poland 09
Performance evolution 4000 # 1 4000 #
2 4000 # 3 4000 # 4 4000 #
5 4000 #
6 4000 #
7 Time (# seconds / 4000m) 270,57 269,93 271,94 266,68 262,56 259,24 0
Velocity (m/s) 14,78 14,82 14,71 15,00 15,23 15,43 #DIV/0!
kph 52,848 53,352 52,956 52,776 54,828 55,548
freq 124 122-124 122-124 123-124 121-124 122-124 na
Watts 460 470 450 531 494 520 na
gearing 50x14 51x14 51x14 50x14 52x14 52x14
Table 20. Performance evolution for an individual pursuit athlete
Fig.68. Velocity/watts evolution for a 4km individual pursuit
0
100
200
300
400
500
600
14,50 14,70 14,90 15,10 15,30 15,50 15,70 15,90
Wat
ts
Velocity (m/s)
Critical Velocity GraphCornu
Taper and specific preparation
Regarding the team pursuit and individual pursuit these athletes need to have at least 10 days preparation
on the track and 1week regeneration without any six day racing or road racing. This rule is slightly different
towards female athletes. Due to hormonal changes and different fat and energy balances, female riders can
use road races as preparation up to 8days before team pursuit completion. The transition between road and
track is more stable than that of men. The female adaptation needs regular aerobic capacity to realise a
good transition to the track.
For men six day and road racing limits peak acidosis and limits any super-compensation due to many
stresses. The following points address the situation of super-compensation;
During 1-2 weeks the body adapts fast to any sort of training impulse.
6 weeks or longer and the same training impulse delivers no further adaptations
Rest and regeneration are crucial in realising any super-compensation
Small gear are used in 6day racing adding neurological benefits in co-ordination but limitations
towards aerobic and anaerobic power which is crucial in pursuits.
Stage races and six-day competitions strain the aerobic power energy system and this in turn breaks down
aerobic capacity and the anaerobic buffering system crucial for pursuit athletes. This creates a flat feeling
after 1500m in the pursuit. What these athletes experience is having difficulties coping with the high acidosis
and high watts from 800-1100watts. The aerobic and anaerobic capacity system needs to be regenerated to
realise this and finalised with anaerobic power to sustain the aerobic power engine that was generated in
the stage racing.
However in contrary to the pursuit for the Madison, 6days racing is in some ways complimentary due to its
continual co-ordination and high speed cadence generating aerobic capacity and aerobic power using
smaller gears.
Fig.69. Performance curve in the step-test to determine evolution in condition and strengths.
Warm-up Protocols
Warm-up protocols are a vital importance in establishing a total program designed specifically to the
needs of time-trialists and pursuit athletes. The same applies for MTB and cyclo -cross.
During the taper impulses will be introduced to stimulate the energy system into top performances. The
polishing or finishing touches should be emphasised with correct warm-up protocols so that both
mentally and physically the athlete can perform under an automatic delivery of all the required
attributes of a top performance.
The warm-up protocols are designed to deliver the needs of each specific characteristic of the event.
Opwarmings protocols team pursuit and individual pursuit
PREP CARD Watts RPM Isotonic Energie drank
65,5 15'
opbouwen
588W 100 RPM
50,5 5' recup <90 RPM
45,5 1'5 blok 2 372 - 441 W > 100 RPM
44 2' recup
42 1,5 blok 3 446 - 515 W > 120 RPM
40,5 10' klaar maken
30,5 2' recup
28,5 1'5 blok 4 sprints 3x :6 150+rpm +:30los
27 2' recup
25 1'5 blok 5 sprints 3x :6 150+rpm
519 - 588 W > 124 RPM
23,5 2` recup
21,5 1'5 blok 6 sprints 3x :6 150+rpm
519 - 588 W > 124 RPM
20 5' losrijden < 215 W 85 RPM OLBAS
15 10` klaarmaken en los
5' 5' klaar maken 5'min sit and focus
0' START
Protein SHAKE binnen <20'mins
Energie drank – 500ml
Fig.68 warm-up protocol for individual pursuit and team pursuit
Opwarmings protocols Prologue time-trials
PREP CARD Watts RPM Isotonic Energie drank
57,5 15'
losrijden parcours verkenning
< 189 W 85 RPM
42,5 5' blok 1 opbouwen 189 - 350 W > 100 RPM
37,5 2' recup
35,5 2' blok 2 238 - 260 W > 100 RPM
33,5 2' recup
31,5 2' blok 3 261 - 292 W > 100 RPM
29,5 2' recup
27,5 1'5 blok 4 sprints 3x :6 150+rpm +:30los
26,5 10' klaar maken
16,5 2' recup
14,5 1'5 blok 5 sprints 3x :6 150+rpm +:30los
13 2' recup
11 1 blok 6 362 - 386 W > 100 RPM
10 10' losrijden < 215 W 85 RPM OLBAS
5' 5' klaar maken 5'min sit and focus
0' START
Protein SHAKE binnen <20'mins
Energie drank – 500ml
Fig. 69 warm-up protocol for prologue time trials
Opwarmings protocols time-trials+12km
PREP CARD Watts RPM Isotonic Energie drank
73 20' losrijden parcours verkenning < 189 W 85-100 RPM
53,5 5' blok 1 190 - 237 W > 100 RPM
48,5 2' recup
46,5 2' blok 2 238 - 260 W > 100 RPM
44,5 2' recup
42,5 2' blok 3 261 - 292 W > 100 RPM
40,5 2' recup
38,5 1'5 blok 4 293 - 362 W > 100 RPM
37,5 10' klaar maken
27,5 2' recup
25,5 1'5 blok 5 sprints 3x :6 +:30los +150rpm
23 2' recup
21 1 blok 6
362 - 386 > 100 RPM
20' 15' losrijden < 189 W 85 RPM OLBAS
5' 5'
klaar maken
5'min sit and focus
0' START
Protein SHAKE binnen <20'mins
Energie drank – 500ml
Fig.70 warm-up protocol for +12km timetrials
Sydney, Beijing and LA team pursuit warm-up protocol adapted from Cottbus
warm-up protocol fine tuned
Important conclusions have
been made of the
importance regarding riding
down after the last efforts
before the start of the race.
Three blocks building nice and gradually with
enough easy riding between. Develop correct
stacking of acidosis.
Perfect warm-up protocol
Track warm up prior to the race. This is only
advisable if the race is several hours later. Not
directly prior to the event.
Note the gradual drop off from watts.
This is very important for reducing
lactate values correctly.
Building on the rollers
20mins
Three important
building blocks. Third
block +/- Race pace
3x Sprint
blocks 6secs
above
1000watts
Preparation for the
race – aero-pack
10mins
Isotonic
4:1 Energy drink – 1-2x energy gels
Last block
now after
sprints
10-15mins
easy riding
plus 5mins
sit before
start
Conclusion
Track warm-up is only applicable if there is a minimum of 3 hours before the competition
The warm-up protocol needs to be executed upon the resistance rollers with SRM protocol guidance.
The warm-up protocol is individualized in energy zones referring to the step-tests
The warm-up protocol is balanced correctly with sports nutrition
The acidosis need to steadily build up and the sprint blocks must be before the last performance simulation
block.
The athlete needs 10minutes to prepare and get ready before starting the sprints and the last block.
The performance simulation block at the end is 1:15-1:30 in duration and needs to simulate the competition.
After the last block it is recommended to build slowly down from the performance watts over 10-15mins.
5mins focus and concentration sitting preferably on track level. One heat before the athlete starts.
Gearing efficiency calculator What we are trying to establish is that higher gear efficiency means a lower energy loss and higher speeds with identical power-outputs. This is determined by many aspects from track rolling resistance to track drag coefficient. By bike positioning using SRM and Retul we can improve the aerodynamics. These adaptations need also to be taken into consideration regarding gearing.
Gearing test procedure step by step
1. 7x2km step test - start time and gear ratio determined by previous test or individual pursuit gear or by 4mml gear estimation
2. Broken 2km or flying 1500m is used to establish to gearing potential in relationship to speed efficiency
3. Standing 1km. This is important after the gearing has been confirmed to test the athlete and track the start time.
4. 4km protocol simulation
Training camps - firstly prior to the camp a step test needs to be completed this will determine the training zones
and track times for the athletes. But also holds valuable reference points as progression indicator.
Race gear set-up, prior to the event. This is completed by simply committing the athlete to 2-3 efforts, which will
determine the track speed/track type and will confirm the training camp form. The athlete needs to be well
motivated for this and the following efforts are advised, either 2km broken or 2000m race pace – followed by a
standing 1km.
For girls the difference is made by a 1500m broken or 1000m individual followed by a 750m standing effort.
For the team pursuit the efforts are similar and the 2km broken or 2km straight is advisable, also a standing 1km.
step test protocol
Athlete start time
Time Dif VIANS kph
Vians m/s
Pians W Drop-off
Av.RPM 7e
Max mml
Max av watt
spo2 Rec.Hr 5'TR
Temp. °
Gearing
Race gear - set-up
Athlete start time
Time Dif VIANS kph
Vians m/s
Pians W Drop-off
Av.RPM Max av watt
spo2 Temp. °
Gearing confirmation
Interpretation of video and srm files in creating a perfect understanding of individual and team pursuit performances
in relationship to conditioning, gears, crank length.
CADENCE RATES AND GEARING
In recent years there has been a lot of testing and monitoring regarding optimal cadence and gearing.
I shall look at each pedal cycle as a stroke cycle. A stroke cycle includes two leg cycles, one with the right, and one
with the left. A stroke length is the distance per/stroke which is determined by the gearing.
Calculating cadence.
These days cadence is easy to calculate using SRM tools or other types of computer systems that calculate cadence
of the pedal stroke.
Also gearing monitoring of cyclists is also possible, for example: travelling at 17 seconds per/250m with a cadence of
124rpm we can see from using table which gearing the athlete is riding.
Blocks realizing important peak watt
adaptation with pedal frequency RPM . Note
the increase in cadence and no drop off.
gearing
Point’s race profile
In terms of max power for different durations, track endurance riders are fairly similar to road
riders - in fact, track riders gain some of their top end fitness by road racing. Point’s racers
tend more towards the road sprinter type or lead-out man type than the smaller, lighter climber
type. Here are the max power efforts from this file:
1 second: 1638 W
5 seconds: 1296 W
20 seconds: 1119 W
1 minute: 697 W
4 minutes: 558 W
20 minutes: 443 W
What all of these values tell us is that these riders need to not only hit high powers, but to
sustain them as well, over and over throughout the race.
Often overlooked by us sports science types is the tactical and technical ability of the riders, which is
absolutely vital in bunch events like this. Knowing how to place yourself well in the field, when to
attack, and when (and how!) to rest is crucial if you aim for the podium.
Weight kg 60 62 64 66 68 70 72 74 76
Av.watts 385 390 400 415 420 425 435 445 460 W/kg 6.41 6.29 6.15 6.28 6.17 6.07 6.04 6.01 6.05
Gear Comparison
Wheelsize 27/700mm Effective Wheelsize 27/700mm
Ring 50
Ring 53
Cog 15
Cog 16
Gear 90
Gear 89,4375
Distance 282,74334
Distance 280,97619
KPH MPH 1k Time RPM RPM Diff
29 18,0 2,04 67,30 67,72 -0,42
30 18,6 2,00 69,62 70,06 -0,44
31 19,3 1,56 71,94 72,39 -0,45
32 19,9 1,53 74,26 74,73 -0,47
33 20,5 1,49 76,58 77,07 -0,48
34 21,1 1,46 78,90 79,40 -0,50
35 21,7 1,43 81,23 81,74 -0,51
36 22,4 1,40 83,55 84,07 -0,53
37 23,0 1,37 85,87 86,41 -0,54
38 23,6 1,35 88,19 88,74 -0,55
39 24,2 1,32 90,51 91,08 -0,57
40 24,9 1,30 92,83 93,41 -0,58
41 25,5 1,28 95,15 95,75 -0,60
42 26,1 1,26 97,47 98,08 -0,61
43 26,7 1,24 99,79 100,42 -0,63
44 27,3 1,22 102,11 102,75 -0,64
45 28,0 1,20 104,43 105,09 -0,66
46 28,6 1,18 106,75 107,42 -0,67
47 29,2 1,17 109,07 109,76 -0,69
48 29,8 1,15 111,39 112,10 -0,70
49 30,4 1,13 113,72 114,43 -0,72
50 31,1 1,12 116,04 116,77 -0,73
51 31,7 1,11 118,36 119,10 -0,74
52 32,3 1,09 120,68 121,44 -0,76
53 32,9 1,08 123,00 123,77 -0,77
54 33,6 1,07 125,32 126,11 -0,79
55 34,2 1,05 127,64 128,44 -0,80
56 34,8 1,04 129,96 130,78 -0,82
57 35,4 1,03 132,28 133,11 -0,83
58 36,0 1,02 134,60 135,45 -0,85
59 36,7 1,01 136,92 137,78 -0,86
60 37,3 1,00 139,24 140,12 -0,88
61 37,9 0,59 141,56 142,45 -0,89
62 38,5 0,58 143,88 144,79 -0,90
63 39,1 0,57 146,21 147,12 -0,92
64 39,8 0,56 148,53 149,46 -0,93
65 40,4 0,55 150,85 151,80 -0,95
66 41,0 0,55 153,17 154,13 -0,96
67 41,6 0,54 155,49 156,47 -0,98
68 42,3 0,53 157,81 158,80 -0,99
69 42,9 0,52 160,13 161,14 -1,01
70 43,5 0,51 162,45 163,47 -1,02
Speed to Time Conversions
Wheelsize 27/700mm
Ring 51
Cog 15
Effective Wheelsize 27/700mm
Gear 91,8
Distance 288,398
KPH MPH RPM 1k Time 1k Time 250 Lap 333 Lap 400 Lap
29 18,0 65,98 2,04 2,04 31,03 41,38 49,66
30 18,6 68,26 2,00 2,00 30,00 40,00 48,00
31 19,3 70,53 1,56 1,56 29,03 38,71 46,45
32 19,9 72,81 1,53 1,53 28,13 37,50 45,00
33 20,5 75,08 1,49 1,49 27,27 36,36 43,64
34 21,1 77,36 1,46 1,46 26,47 35,29 42,35
35 21,7 79,63 1,43 1,43 25,71 34,29 41,14
36 22,4 81,91 1,40 1,40 25,00 33,33 40,00
37 23,0 84,18 1,37 1,37 24,32 32,43 38,92
38 23,6 86,46 1,35 1,35 23,68 31,58 37,89
39 24,2 88,73 1,32 1,32 23,08 30,77 36,92
40 24,9 91,01 1,30 1,30 22,50 30,00 36,00
41 25,5 93,28 1,28 1,28 21,95 29,27 35,12
42 26,1 95,56 1,26 1,26 21,43 28,57 34,29
43 26,7 97,83 1,24 1,24 20,93 27,91 33,49
44 27,3 100,11 1,22 1,22 20,45 27,27 32,73
45 28,0 102,38 1,20 1,20 20,00 26,67 32,00
46 28,6 104,66 1,18 1,18 19,57 26,09 31,30
47 29,2 106,94 1,17 1,17 19,15 25,53 30,64
48 29,8 109,21 1,15 1,15 18,75 25,00 30,00
49 30,4 111,49 1,13 1,13 18,37 24,49 29,39
50 31,1 113,76 1,12 1,12 18,00 24,00 28,80
51 31,7 116,04 1,11 1,11 17,65 23,53 28,24
52 32,3 118,31 1,09 1,09 17,31 23,08 27,69
53 32,9 120,59 1,08 1,08 16,98 22,64 27,17
54 33,6 122,86 1,07 1,07 16,67 22,22 26,67
55 34,2 125,14 1,05 1,05 16,36 21,82 26,18
56 34,8 127,41 1,04 1,04 16,07 21,43 25,71
57 35,4 129,69 1,03 1,03 15,79 21,05 25,26
58 36,0 131,96 1,02 1,02 15,52 20,69 24,83
59 36,7 134,24 1,01 1,01 15,25 20,34 24,41
60 37,3 136,51 1,00 1,00 15,00 20,00 24,00
61 37,9 138,79 0,59 0,59 14,75 19,67 23,61
62 38,5 141,06 0,58 0,58 14,52 19,35 23,23
63 39,1 143,34 0,57 0,57 14,29 19,05 22,86
64 39,8 145,61 0,56 0,56 14,06 18,75 22,50
65 40,4 147,89 0,55 0,55 13,85 18,46 22,15
66 41,0 150,16 0,55 0,55 13,64 18,18 21,82
67 41,6 152,44 0,54 0,54 13,43 17,91 21,49
68 42,3 154,71 0,53 0,53 13,24 17,65 21,18
69 42,9 156,99 0,52 0,52 13,04 17,39 20,87
70 43,5 159,27 0,51 0,51 12,86 17,14 20,57
Determining the optimal cadence for each individual this can be determined through
the step test or in specific peak anaerobic power broken efforts. It is also important that the crank length is optimal
to the tactic of the race.
What is also interesting for the track coach is that the stopwatch with cadence monitoring can be used to “spy” on
your concurrence to determine which gear and velocity they are realizing in their efforts.
Crank length change theory (max sustained rpm and peak watts potential) Changes made and interpretated from the training camp with Cornu in preparation for Copenhagen and for Kenny and Davy in hasselt
First some explanation to discuss about the turns in track
Track racing is governed by physical forces in aerodynamics but have also important forces in the
turns to take into consideration particularly regarding gearing and cadence. In the turns M v d v / d
t = p - K v^3, for K which depends on aerodynamics, where p is power, v is velocity, and M is
system mass.
Since d v /dt , which is acceleration, is not zero, If acceleration were very small, then to decent
approximation, v = (p / K)^(1/3) – no lag. But if acceleration is significant, power goes into and
comes out of kinetic energy changes ( M v dv = d(M v^2 / 2) ) in addition to
supporting wind resistance. With these forces taken into consideration the athlete power analysis is
critical in realizing what is happening to the athlete both technically and conditionally determining
the right or wrong gear and crank length.
250 meter track, with 150 meters in corners, and 100 meters in straights. If the corners are
semicircular, they have a radius of R= (150 meters / 2 pi). If the bike centre-of-mass (COM) is going
v = 60 km/hr = 16.7 m/sec, it is experiencing a centrifugal acceleration relative to gravity of (v2/R g)
= 1.19 (I'll define this as alpha). Then the total acceleration ("g-forces") is g sqrt(1 + alpha^2) = 1.55
g.
What's happening as you lose those watts in the turn, and then you gradually speed up in the straight
away. That's why each low point on the wattage plot is followed by an incline on the speed plot. This
is then of great importance to see when our athletes are dropping off in pace towards the end of the
straight but also how they ride the turns. Also during drop-offs it is important if the athlete can pick
the pace up that the pedal speed can be achieved. This is determined with the crank length.
Crank lengths and important conclusions regarding rpm
Cranks length is crucial in determining the ultimate power watt peaks together with the acceleration
potential.
Crank length is crucial in maintaining the speed and picking up the pace if the pace falls away
Crank length determines the speed of the pedal. The pistons (cranks) in team pursuit are important
with this young team to develop maximum sustained power output whilst in front.
Balancing the team with crank length. Speed and cadence are key elements to realizing a perfect
race. If the pace is dropped then the rider that takes turn on the front needs to pick the pace up. To
realize the peak potential watt the crank lengths need to be optimal to the individual rider.
(These measurements from cranks lengths were in training from VWEM ,Hasselt and Copenhagen
determined. The peak watts were better and the pace pickup is realistic.
broken sets. These sets are important guidelines towards cadence and gear ratio.
Note the climax in cadence with 172,5mm cranks and 50x14 gearing creating very
high speed and highest possible average watts.
Physiological potential determining gearing, crank length
crank lengths and making the right choice regarding the changes in speed and
acceleration from the smaller track and tighter corners. Even important are the
watts and these were ok even on a smaller gear and on a tighter track.
Consideration had to made with the slight peak-watt difference during the 12secs
on the front. Here the gearing was smaller and the crank
lengths for were 170mm. It is clear to see that
the peak watts are made as per/normal but
now the pickup from drop-off is possible. This
was not possible before. This is due to the VP.
Drop off
Super pick up
from
Drop off
Super proof
over crank
length from
The speed of the pedal, Vp, depends on the cadence, Cd, and the crank
length, Cl. Pedal velocity is a critical area of evaluation in understanding gear size over cadence and crank length. This drop-off and pickup out of the turn is emphasizing the importance of pedal speed and not gearing. Action/ reaction element is accented.
This is the element of gearing and fitness. Being able to react
and increase speed comes through pedal velocity and the
sustained effort is realized through gear change and fitness
especially endurance based towards the end of the race. AeC
and AeP en AeP adaptations.
Interpretate results and understand physiological improvements needed to realise adaptations
Team pursuit
Drop off - fatigue? Why – what reasons – resistance program – lack of sleep or jet-lag for example
Technical areas - skill problems?
(BEL)
250m 21.371 9 21.371
500m 36.225 11 14.854
750m 51.107 12 14.882
1000m 1:06.189 12 15.082
1250m 1:21.592 12 15.403
1500m 1:36.913 13 15.321
1750m 1:52.268 13 15.355
2000m 2:07.950 14 15.682
2250m 2:23.637 15 15.687
2500m 2:38.965 15 15.328
2750m 2:54.445 15 15.480
3000m 3:10.324 15 15.879
3250m 3:25.819 15 15.495
3500m 3:41.250 14 15.431
3750m 3:57.294 14 16.044
4000m 4:13.098 14 15.804
Improvements in individual pursuit.
Condition – aerobic capacity – faster at the end of the race with a better anaerobic power adaptation
Athlete well fresh and focused
Pick up in pace at end of race – correct crank length – gearing not too big
Here is a good example of the individual pursuit. Note the drop-off and reaction to this,
indicating a strong aerobic power and importantly a solid aerobic capacity base. For this
athlete hopefully generating the aerobic capacity even more will enable him to produce
a higher average aerobic power
Here are illustrations of real problems in the team pursuit. Dropping the pace is often an area of crank length and gearing choice to made
in relationship to the athletes condition and experience. Here the crank smaller crank lengths would help solve this problem. If they were
170mm and not 172,5.
However other considerations need to made concerning condition. Here the athlete is stressed and not recovered fully from big individual-
pursuit effort the day before. It is noticeable that athletes with high vo2max and large Aerobic capacity motors can certainly recover very
well.
Individual pursuit 125m 13.381 8 250m 21.573 7 21.573 375m 29.539 4 500m 37.395 4 15.822 625m 45.286 4 750m 53.211 3 15.816 875m 1:01.153 3 1000m 1:09.162 3 15.951 1125m 1:17.216 2 1250m 1:25.327 2 16.165 1375m 1:33.523 2 1500m 1:41.733 2 16.406 1625m 1:49.992 3 1750m 1:58.257 4 16.524 1875m 2:06.585 4 2000m 2:14.892 4 16.635 2125m 2:23.278 4 2250m 2:31.612 4 16.720 2375m 2:40.041 4 2500m 2:48.482 4 16.870 2625m 2:56.975 5 2750m 3:05.459 6 16.977 2875m 3:13.969 7 3000m 3:22.466 8 17.007 3125m 3:31.015 9 3250m 3:39.542 9 17.076 3375m 3:48.131 9 3500m 3:56.747 9 17.205 3625m 4:05.347 10 3750m 4:13.912 10 17.165 3875m 4:22.528 10 4000m 4:31.094 10 17.182
. The back end of the race drops away due to gearing size. However this
is governed conditionally by initially AeC and AeP energy zones.
Considering the main training up to this point was AeC accented the
result not bad.
Team pursuit 250m 21.480 9 21.480 500m 36.530 7 15.050 750m 51.590 6 15.060 1000m 1:06.818 6 15.228 1250m 1:22.056 7 15.238 1500m 1:37.383 7 15.327 1750m 1:52.917 8 15.534 2000m 2:08.353 9 15.436 2250m 2:23.675 8 15.322 2500m 2:39.013 6 15.338 2750m 2:54.509 9 15.496 3000m 3:10.109 9 15.600 3250m 3:25.575 9 15.466 3500m 3:41.328 10 15.753 3750m 3:57.085 9 15.757 4000m 4:13.122 9 16.037
Team-pursuit . The drop –off from the 1500m is here remarked by cadence and
will both be due to wrong gear choice and the pedal velocity which limits any
pickup.
These examples are taken shortly after 6-day racing and indicate a drained
aerobic capacity and power.
Whats happening in pursuit for the big engine?
Aero
bic
Anaerobic
Power:
Balancing the aerobic and anaerobic power. This is dictated by
your aerobic capacity limitations
Aerobic power pushes the oxygen energy possibilities towards
race zone – cycling faster
Anaerobic power expands the height of the point of the
triangle and dictates how long the cyclist can ride fast
Capacity: Total amount of energy available.
Developing the triangle in length top-end speed and breadth towards
base endurance - aerobic and anaerobic lie perpendicular to each
other but have very important roles to play in regenerating or
establishing time trial and pursuit potential.
Aerobic
Anaerobic
Capacity Power
Assists anaerobic
capacity – works
against both powers
Works against
aerobic power
Works against
both capacities
Works against
both capacities
References :
Data base video analysis VWEM (top-sport trainer Wiggins 2007/2008)
Data SRM files – training and racing VWEM (top-sport trainer Wiggins 2007/2008)
Data online follow up- daily metrics and training schema’s VWEM (top-sport trainer Wiggins 2007/2008)
TEST results KUL and VWEM (top – sport trainer Wiggins)
Athlete top-sport potential tables – evolution in multi-year planning to realise world-class performances.
4km time kph m/s av.watts* cadence
Steptest 2km time kph m/s av.watts* cadence
Elite Olympic 4.18.0 55.80 15.5 590+ 126
Elite Olympic 2.05 57.60 16 590+ 126
Elite World class 4.23.0 54.72 15.2 540 125
Elite World class 2.07 56.66 15.74 550 126
Elite European 4.25.0 54.32 15.09 520 125
Elite European 2.09 55.80 15.50 515 125
Elite National 4.28.0 53.71 14.92 490 124
Elite National 2.11 54.93 15.26 490 124
U23 World class 4.26.0 54.10 15.03 480 125
U23 World class 2.09.0 55.80 15.50 480 124
21j 2% 4.31.0 53.13 14.76
21j 2% 2.12.0 54.54 15.15
20j 3% 4.34.0 52.52 14.59
20j 3% 2.13.0 54.10 15.03
19j 5% 4.39.0 51.58 14.33
19j 5% 2.15.0 52.31 14.49
U23 European 4.30.0 53.31 14.81 450 124
U23 European 2.11.0 54.93 15.26 460 124
21j 2% 4.35.0 52.34 14.54
21j 2% 2.14.0 53.71 14.92
20j 3% 4.44.0 50.68 14.08
20j 3% 2.15.0 52.31 14.49
19j 5% 4.49.0 49.82 13.84
19j 5% 2.18.0 52.16 14.49
U23 National 4.36.0 52.16 14.49 420 122
U23 National 2.15.0 53.31 14.81 420 122
Juniors World class
Na Na Na Na Na
Juniors World class
2.15.0 53.31 14.81 400 124
17j 2% 2.18.0 52.16 14.49
Juniors European Na Na Na Na Na
Juniors European 2.18.0 52.16 14.49 390 124
17j 2% 2.21.0 51.04 14.18
Juniors National Na Na Na Na Na
Juniors National 2.23.0 50.32 13.98 360 124
World class performance tables in the form of progression percentages.
World class performance times are an important start point for building references for any progression performance talent program.
These world class times will dictate the screening test reference points. Athlete quality screening is the key.
To produce a screening norm that allows a 5% opportunity to nurture your athletes. It is from experience that 5% over a period of 2-3 years is comprehensible in
realising an evolutionary projection towards these major goals.
3km time kph m/s av.watts* cadence
2km time kph m/s av.watts* cadence
Elite Olympic Na Na Na Na Na
Elite Olympic 2.09 55.80 15.50 660 130
Elite World class 3.16 55.08 15.30 520 126
Elite World class 2.12 54.54 15.15 620 130
Elite European 3.18 54.54 15.15 498 125
Elite European 2.14 53.71 14.92 580 126
Elite National 3.21 53.71 14.92 480 125
Elite National Na Na Na Na Na
U23 World class 3.18 54.54 15.15 460 124
U23 World class 2.14 53.71 14.92 533 124
21j 2% 3.21 53.71 14.92
21j 2% 2.16 52.92 14.70
20j 3% 3.23 53.17 14.77
20j 3% 2.18 52.16 14.49
19j 5% 3.27 52.16 14.49
19j 5% 2.20 51.40 14.28
U23 European 3.20 54 15 440 124
U23 European 2.17 52.52 14.59 520 124
21j 2% 3.24 52.92 14.7
21j 2% 2.19 51.76 14.38
20j 3% 3.26 52.41 14.56
20j 3% 2.21 51.04 14.18
19j 5% 3.30 51.40 14.28
19j 5% 2.23 50.32 13.98
U23 National 3.22 53.46 14.85 410 124
U23 National 2.20 51.40 14.28 490 124
Juniors World class
3.22 53.46 14.85 400 124
Juniors World class
2.14 53.71 14.92 480 126
17j 2% 3.26
17j 2% 2.16
Juniors European 3.24 52.92 14.70 380 124
Juniors European 2.18 52.16 14.49 460 126
17j 2% 3.28
17j 2% 2.20
Juniors National 3.27 52.16 14.49 360 124
Juniors National 2.21 51.04 14.18 420 126
4km achtervolging time kph m/s av.watts* av.cadence actual av.rond.tempo
Elite Olympic 3.56.0 60.98 16.94 510 128 236 na
2% 4.00.72 59.79 16.61 500
240.72 na
3% 4.03.08 59.22 16.45 490 243.08 na
5% 4.07.80 58.10 16.14 470 247.80 na
Elite World class 4.05.0 58.75 16.32 480 245 na
Elite European 4.08.0 58.03 16.12 460 248 na
Elite National 4.15.0 56.44 15.68 415 126 255 na
4km achtervolging time kph m/s av.watts* av.cadence actual av.rond.tempo
vertrektijd 250m 20.0 45.0 12.5 715 116 20.0 20.0
26j 2% 20.4 44.10 12.25
20.4 20.4
25j 3% 20.6 43.66 12.13 20.6 20.6
24j 5% 21.0 42.84 11.9 21.0 21.0
23j 6% 21.2 42.44 11.79 650 113 21.2 21.2
22j 7% 21.4 42.04 11.68
21.4 21.4
21j 8% 21.6 41.65 11.57 21.6 21.6
20j 9% 21.8 41.25 11.46 21.8 21.8
19j 10% 22.0 40.89 11.36 22.0 22.0
18j 11% 22.2 40.53 11.26 22.2 22.2
17j 12% 22.4 40.17 11.16 22.4 22.4
4km achtervolging time kph m/s av.watts* av.cadence actual av.rond.tempo
vertrek 1e 1000m 1.04 56.23 15.62 590 126 64 14.66
26j 2% 1.05 55.36 15.38
65 14.86
25j 3% 1.06 54.54 15.15 66 15.13
24j 5% 1.07 53.71 14.92 67 15.33
23j 6% 1.07 53.71 14.92
530
126 67 15.26
21j 8% 1.09 52.16 14.49
69 15.86
20j 9% 1.09 52.16 14.49 69 15.96
19j 10% 1.10 51.40 14.28 70 16.06
18j 11% 1.11 50.68 14.08 71 16.20
17j 12% 1.11 50.68 14.08 71 16.26
4km achtervolging time kph m/s av.watts* av.cadence actual av.rond.tempo
potential av. 3km 2.39.0 62.24 17.29 460 130 159 14.45
26j 2% 2.42.18 61.02 16.95
162.18 14.74
25j 3% 2.43.77 60.44 16.79 163.77 14.88
24j 5% 2.46.95 59.29 16.47 166.95 15.17
23j 6% 2.48.54 58.71 16.31
440
128
168.54 15.32
22j 7% 2.50.13 58.17 16.16 170.13 15.46
21j 8% 2.51.72 57.63 16.01 171.72 15.61
20j 9% 2.53.31 57.09 15.86 173.31 15.75
19j 10% 2.54.90 56.59 15.72 174.90 15.90
18j 11% 2.56.49 56.08 15.58 176.49 16.04
17j 12% 2.58.08 55.58 15.44 178.08 16.18
1km ifv PA time kph m/s av.watts* cadence
Elite Olympic 1.04 56.23 15.62 590+ 126
Elite World class 1.05 55.36 15.38 560 126
Elite European 1.06 54.54 15.15 510 126
Elite National 1.07 53.71 14.92 480 124
U23 World class 1.06 54.54 15.15 540+ 125
21j 2% 1.07 53.71 14.92
20j 3% 1.08 52.92 14.70
19j 5% 1.09 52.16 14.49
U23 European 1.07 53.71 14.92
460
124
21j 2% 1.08 52.92 14.70
20j 3% 1.09 52.16 14.49
19j 5% 1.10 51.40 14.28
U23 National 1.08 52.92 14.70 440 124
Juniors World class
1.07 53.71 14.92
450
124
17j 2% 1.08 52.92 14.70
Juniors European 1.08 52.92 14.70
17j 2% 1.09 52.16 14.49
Juniors National 1.09 52.16 14.49
1km time kph m/s av.watts* cadence
Elite Olympic 60 59.97 16.66 960 134
Elite World class 1.01 59 16.39 920 132
Elite European 1.03 57.13 15.87 912 130
Elite National 1.05 55.36 15.38 900 128
U23 World class 1.03 57.13 15.87 900 128
21j 2% 1.04 56.23 15.62
20j 3% 1.05 55.36 15.38
19j 5% 1.06 54.54 15.15
U23 European 1.05 55.36 15.38 860 128
21j 2% 1.06 54.54 15.15
20j 3% 1.07 53.71 14.92
19j 5% 1.08 52.92 14.70
U23 National 1.07 53.71 14.92 820 126
Juniors World class 1.03 57.13 15.87 890 126
17j 2% 1.04 56.23 15.62 na na
Juniors European 1.04 56.23 15.62 860 126
17j 2% 1.05 55.36 15.38 na na
Juniors National 1.06 54.54 15.15 820 126
Globaal overzicht piste field test
Evaluatie Step test
50x14 vollewiel kleine tubs
Elite
51x15 normaal spokewielen met bandjes
Kenny Dominique Stijn Tom Bert Ingmar Steve Tim Iljo
06.11.03 2.23.35 2.15.88 2.20.72 2.20.72 2.21.52
06.12.21 2.11.22 2.14.42 2.20.79 2.13.22
07.06.01 2.16.52
07.07.17 2.13.97
07.07.19 2.21.55 2.14.53
07.10.01 2.11.16 2.13.21 2.21.0 2.16.27 2.12.65
07.10.15 2.09.03 2.13.68 2.11.91 2.15.06 2.11.22 2.19.07
07.12.21 2.15.0 2.21.0
08.03.16 2.07.17 2.11.37
Sea level test 1/10/2007 VWEM
Athlete Start time Time
Dif VIANS
kph Vians m/s Pians
Av. RPM 7e
Max mml
Max av watt
spo2 Rec.Hr 5'TR
Temp. °
Gearing
1
2.16.27 -4,52 46,03 12,787 344,4
14,1 477 97 104 21° 50x14
2
2.21.0 *7.42 46,72 12,98 **
12,4 ** 97 121 19° 50x14
3
2.11.16 -0,06 48,42 13,45 310
15,6 445 98 102 20° 50x14
4
2.12.65 -0,57 48,16 13,38 **
13,1 ** 99 114 19° 50x14
5 2.13.21 -0,76 48,27 13,41 377,7 9,9 508,9 99 109 21° 50x14
Sea level test 15/10/2007 VWEM
Athlete start time Time
Dif VIANS
kph Vians m/s Pians
Av.RPM 7e
Max mml
Max av watt
spo2 Rec.Hr 5'TR
Temp. °
Gearing
1
2.15.06 -1,06 46,11 12,81 334,4 na 13,2 448,6 Na Na 22° 50x14
2
2.11.91 -9,09 48,09 13,36 390 na 12,4 496,8 Na Na 22° 50x14
3
2.09.03 -2,88 48,45 13,6 312 na 14,9 444 Na Na 23° 50x14
4
2.11.22 -1,43 48,81 13,56 430 na 12,7 475,9 Na Na 18° 50x14
5
2.13.68 *0.47 50,97 14,16 387,3 na 9 Na Na Na 18° 50x14
6 2.19.07 na 46,72 12,98 Na na 15 Na Na Na 23° 48x14
Sea level test 21/12/2007 VWEM
Athlete start time Time
Dif VIANS
kph Vians m/s Pians
Av.RPM 7e
Max mml
Max av watt
spo2 Rec.Hr 5'TR
Temp. °
Gearing
1 11:00 2.15.0 -88 48.31 13.42 381.8 124.8 12.4 517 na na 21° 50x14
Sea level test 16/03/2008 VWEM
Athlete start time Time
Dif VIANS
kph Vians m/s Pians
Av.RPM 7e
Max mml
Max av watt
spo2 Rec.Hr 5'TR
Temp. °
Gearing
1 11:00 2.07.17 -8 51.22 14.2 416 126.2 14.0 551 na na 18° 50x14
4 11:00 2.11.37 15 49.79 13.8 392 124.9 10,2 514 na na 18° 50x14
Belofte en junioren
7 8 9 10 11 12 13 14 15 16 17 18
07.06.01 2.30.95 2.21.06 2.19.76
07.06.02 2.28.14 2.27.38 2.24.84 2.26.47 2.22.41 2.19.89
07.06.30 2.28.45 2.27.69 2.27.48 2.19.95 2.23.88
07.07.17
2.22.47 2.17.27 2.19.08 2.20.02 2.19.76 2.34.92
The step test results .One of several important tests in the screening program and further nurturing of the athletes.
The step test is one excellent indicator in practice.
It indicates current condition of the athletes.
We can develop a profile of the athlete and correctly adapt their training programs from the results. By using watts and lactate measurements in the steps.
It is a motivational test towards major competition.
We can develop further the profile of the athlete towards gearing and crank length from the srm files.
Progression/evolution chart example from Dominique Cornu. From race situations to training and field tests.
Fast tracking the athlete’s physiological adaptations.
Developing a correct profile for the athlete towards gearing, crank length and strength development.
Creating importantly a individual profile of athletes that can be best adapted into one unit in the team pursuit. “Coming out of the same mould!”
PART 3 Technological skills to cycling
SRM -
While it might be nice to think that you’re 50 Watts stronger than your training partner, you only get to take that power with you to a race if it’s REAL. Otherwise, you’re just fooling yourself. So, what do you need to do to know that the power you think you’re riding at is correct? Setting the zero offset Say your resting heart rate is 60 beats per minute. You could call this a “baseline” measurement, since you’re not doing any work when you measure it. Now, say your resting heart rate is 55 beats per minute, but you haven’t checked it in a month, and you think its 60 beats per minute like it was back then. Now you’ve got some error in your baseline measurement, and you’ll think that you’re not working as hard as you really are when you’re out training. Not ideal, right? Your PowerMeter has a baseline too, called the “zero offset”, when the PowerMeter is on but there’s no pressure on the pedals. You can check and set it using your PowerControl. You need to do this at the start of every ride, so that you don’t have erroneous power data from that ride. Yes, you can go back and fix it later in the software, but how will you know what to fix it TO if you didn’t check it? The reason you need to do this every ride is that the parts measuring your power are mounted on metal, which shrinks and expands with changes in temperature, as well as tension from the chainring and crank arm bolts. So the zero offset changes with temperature and tension, too, and you need to correct for this. Other than setting it at the start of each ride, you’d want to reset it if there was a big change in the weather while you were out on your bike (started on a sunny coast road at 20°C, and then climbed a mountain where it was 5°C), or if you’d tightened any of the chainring bolts or crank arm bolts. You can set it as many times as you like during a ride, although you’ll only see the first one in the file properties afterwards. System Accuracy If your SRM system is well-maintained, has it’s calibration verified, and it’s zero offset set daily, the accuracy of the system is as follows: �� Amateur (2 strain gauges) system: ±5% �� Professional (4 strain gauges) system: ±2% �� Science and Mountain Bike (8 strain gauges) system: ±0.5%
Part I I : Making sure your data is accurate
Here’s how you check and set the zero offset for your SRM system: Make sure the PowerControl is in the normal display mode, with the current speed, cadence, power, and heartrate showing, by pressing and holding “Mode” for three seconds. Press “Mode” and “Set” at the same time, and a screen will come up that shows you the current baseline Measurements as well as what value the PowerControl is currently using as its zero offset. Turn the PowerMeter on by pedalling backwards a few times, and then leave the pedals in a horizontal position and let go of them. You need to make sure that nothing is touching them or you will end up with an inaccurate zero offset. With track systems, put forward pressure on the pedals before setting the zero offset. Wait until the zero offset stabilises, resting on the same number for a few seconds. After the zero offset stabilises, press “Set” to store this value for its power calculations. Press and hold “Mode” for three seconds to return to the Normal Mode. Zero offset being Actual zero offset (0 when PowerMeter is off) Actual zero offset New zero offset is stored Stable zero offset Making sure you’re using the right slope for your PowerMeter Back to the heart rate analogy for this one. So, you’ve measured your “baseline” resting heart rate accurately, which is a good start. Now you need to know how much your heart rate goes up for a given amount of effort – this would be different for each individual. Normally, it goes up in pretty much a straight line with a constant increase in effort, so you get a nice relationship, which you could call your heart’s “sensitivity” to effort. Again, it’s the same for your SRMs. The system needs to know how much to respond when you push on the pedals, how “sensitive” it is to your effort, and this is different for every PowerMeter. The figure below shows this sensitivity, which is described as the “slope” of the line, as well as the zero offset. All the figure is saying is that as the force goes up, i.e. as you pedal harder, the PowerMeter reading goes up. Your PowerControl needs to know how those two things are related, in mathematical terms what the “slope” of the line is, otherwise it will display the wrong power. The zero offset is just showing that if you don’t push on the pedals at all, the PowerMeter reading will stay the same. The slope is measured at the factory before your SRMs are sent out to you, and is written on the back of your PowerMeter (as well as on your invoice). It’s a three-digit number, usually between about 12.0 and 35.0. You only need to set this once for your system in the computer software, since it is very stable. Having said that, if you want to check the slope of your PowerMeter periodically (i.e. every six months to one year), you can send you PowerMeter back to us for a calibration,. There are also instructions at the end of the manual to help you check it yourself. How to set the slope of your PowerMeter using your PowerControl You can either do this in the SRM software on your computer when your PowerControl is connected (see page 36 for instructions), or you can do it on the PowerControl itself. Here’s how: Find out the correct slope, of your PowerMeter. It is written on the back of your PowerMeter, and is also
on your invoice. If you can’t find it, get in touch with us ([email protected]) and tell us the serial number of your PowerMeter and we will tell you the correct slope. Press and hold “Mode” once to exit any other mode. Then press “Mode”, “Set” and “Pro” all at the same time to get into the Setup Mode. Press “Mode” seven times to get to the screen that shows the slope. When the “S” is flashing, you can set the slope. Use the “Pro” button to increase the number, and the “Set” button to decrease it. When you are finished, press and hold “Mode” for three seconds to go back to the main screen.
Computation of the slope of the Powermeter
Dynamic calibrating (only at SRM) Static calibrating
475,5 mm lever length 110,0 mm lever length 49,0 mm Ø axle 20,4 kg Weight
24,5 mm Radius axle 200,12 N Strength Weight * 9,81
z.B. 0 cm Shorten the lever length by departure for each groove = 2cm 22,01 Nm Torque
500,0 mm entire lever length Lever length + radius axle
0,500 m lever length left crank 5,35 kg Weight z.B. 865 Hz Zero during load 52,48 N Strength Weight * 9,81 z.B. 458 Hz Zero without load 26,24 Nm Torque at the eddy current brake 407 Hz Change of the frequency 22,01 Nm Torque z.B. 53 Chain sheet Powermeter 14 Chain sheet eddy current brake 18,5 Hz/Nm Slope (Hz/Nm) 3,79 Speed ratio of chain sheets right crank 99,34 Nm Torque at the power meter z.B. 832 Hz Zero during load z.B. 480 Hz Zero without load z.B. 2000 Hz Zero during load z.B. 500 Hz Zero without load (no-load operation) 300 Hz Change of the frequency 22,01 Nm Torque 1500 Hz Change of the frequency 99,34 Nm Torque 13,6 Hz/Nm Slope (Hz/Nm) 15,10 Hz/Nm slope 16,1 Hz/Nm Slope averaged
Hoe de SRM powermeter recalibreren ?
Zoek een gewicht van ongeveer 30-40 kg. Hang dit aan een kabel van ongeveer 25 cm., zodanig dat het gewicht de vloer niet meer raakt als het aan de horizontale pedaal-as hangt. U kan ook een langere kabel nemen en de fiets op een tafel plaatsen.
Reken het gewicht om in Newton. Vb. 30 kg = 30 * 9.81 = 294.3 N
Bereken het moment dat u krijgt wanneer het gewicht aan de horizontale pedaal-as hangt. Vb. bij een lengte van de pedaal-as van 172.5 mm : 0.1725m * 294.3 N = 294.3 Nm (Newton meter).
Zet de Powermeter aan door achterwaarts te trappen. Doe dit met een gemiddelde versnelling zodat de ketting op één lijn ligt, vb. 53/15.
Noteer zero (in ruststand) van de Powermeter (MODE + SET, rechts nummer) vb. F0 = 500 Hz.
Breng de pedaal-as in horizontale positie en hang het gewicht aan de linkerpedaal.
Noteer de frequentie output-links van de Powermeter (MODE + SET, rechts nummer) vb. F_links = 1450 Hz.
Breng de pedaal-as in horizontale positie en hang het gewicht aan de rechter pedaal.
Noteer de frequentie output-rechts van de Powermeter (MODE + SET, rechts nummer) vb. F_rechts = 1550 Hz.
Bereken de verandering in frequentie van de Powermeter met dit gewicht als volgt (F_links + F_rechts)/2 F0 Vb. (1450 + 1550)/2 Hz - 500 Hz = 1000 Hz met een moment van 50.77 Nm.
Bereken de gemiddelde helling van de Powermeter. Helling = 1000 Hz/50.77 Nm = 19.90 Hz/Nm.
Deze gecalibreerde helling (slope) van de Powermeter moet ingevoerd worden in Powercontrol. Het is aangeraden deze helling elke maand opnieuw te berekenen.
Data-Manager for SRM
Data-Manager for SRM is an extension application to use with Dartfish Software. It enables you to: > Synchronize your SRM data sources with video > Display them on video as various graph, text or symbols > Associate qualitative and quantitative data into one visual and accurate document
EASILY LINK YOUR SRM DATA FILES WITH VIDEO +DataVideo= Improve your training and understanding by associating quantitative and qualitative data
> Link SRM data sources : - with one video > Synchronize SRM data sources with video
Use various graphics and video displays to highlight key points of interest > Display SRM data on video for full screen view :
- as graph
- as text information
> Delete embedded and linked data sources
> Use Dartfish symbol font to enhance data
Make powerful analyses thanks to Dartfish advanced tools > Control and display video in full-screen
> Replay video together with data at different speeds, frame by frame
> View simultaneously up to 4 different videos for qualitative and quantitative comparisons
POWER-Cranks
Altitude-tents