Embed Size (px)
Citation preview
BRIEFPLOOIER 1.4
http://designforeveryone.howest.be/
Ivo Six / Lenn Tilley / Tine Bossuyt / Cellini De Langhe
159 min45,50 euro
http://briefplooier2012.blogspot.com/
ASSEMBLY MANUALPLOOIHULP
http://designforeveryone.howest.be/
BILL OF MATERIAL
- 4 lasered MDF parts- 2 lasered plexi parts- 4 anti slip caps- Anti -slip- 4 bolts M 2,5- 4 nuts M 2,5
BRIEFPLOOIER 1.4
9 different tools are needed
13 standard parts
6 made parts
1DESCRIPTIONPut glue on the 3 tabs.
BRIEFPLOOIER 1.4
/
2 min
Glue
/
4 parts added
€ 1
2DESCRIPTIONAttach de glued tabs to the base plate.
BRIEFPLOOIER 1.4
/
2 min
/
/
0 parts added
€ 0
3DESCRIPTIONSand the edges until there is no more heigthdifferece.
BRIEFPLOOIER 1.4
/
3 min
Sandpaper
/
0 parts added
€ 0,50
4DESCRIPTIONPaint the whole assembly with purple paint. Usea fabric roller for the best result.
BRIEFPLOOIER 1.4
/
15 min
Paint & paint roller
/
0 parts added
€ 5
5DESCRIPTIONPaint the flower with a small pensil
BRIEFPLOOIER 1.4
/
60 min
Paints & pensil
/
0 parts added
€ 5
6DESCRIPTIONCut the anti slip in the right size (100 x 90). Thishas to be done twice.
BRIEFPLOOIER 1.4
/
2 min
Cutter knife & lath
Anti slip
1 part added
€ 10
7DESCRIPTIONAttach the anti slip to the base plate with thelasered plexi parts with the 4 bolt and 4 nuts ofM 2,5.
BRIEFPLOOIER 1.4
/
5 min
Screwdriver
Anti slip
12 parts added
€ 0
8DESCRIPTIONAttach the 4 anti slip caps to the back of thebase plate.
BRIEFPLOOIER 1.4
/
1 min
/
4 anti slip caps
4 parts added
€ 1
ASSEMBLY MANUALSNIJHULP
http://designforeveryone.howest.be/
BILL OF MATERIAL
- 4 lasered MDF parts- 1 pair of scissors- 4 Anti –slip caps- 2 screws- 1 wooden handle- 1 big screw
BRIEFPLOOIER 1.4
12 different tools are needed
9 standard parts.
5 made parts
1DESCRIPTIONFirst, cut of the handles from the pair of scissors.Secondly, weld the big screw on top of the pairof scissors and drill two holes in it. The diameterof the holes must be 2 mm.
BRIEFPLOOIER 1.4
/
15 min
Welder, drilling machine, drill and saw
Screw and pair of scissors
2 parts added
€ 10
2DESCRIPTIONPut glue on several lasered MDF parts.
BRIEFPLOOIER 1.4
/
3 min
glue
/
4 parts added
€ 1
3DESCRIPTIONGlue the 4 MDF parts in layers.The layers from bottum to top:- Frame- square with text downwards,- simple square- U-form
BRIEFPLOOIER 1.4
/
3 min
/
/
0 parts added
€ 0
4DESCRIPTIONSand the edges until there is no more heigthdifference.
BRIEFPLOOIER 1.4
/
8 min
Sand paper
/
0 parts added
€ 0,50
5DESCRIPTIONDrill a hole with a diameter of 12 mm with adepth of 10 mm.
BRIEFPLOOIER 1.4
/
2 min
Drilling machine & drill
/
0 parts added
€ 0
6DESCRIPTIONPaint the whole assembly with purple paint. Usea fabric roller for the best result.
BRIEFPLOOIER 1.4
/
15 min
Paint & roller
/
0 parts added
€ 5
7DESCRIPTIONPaint the text at the back with a small pensil inyellow paint. The wooden handle must also bepainted yellow.
BRIEFPLOOIER 1.4
/
20 min
Paint & pencil
/
0 part added
€ 5
8DESCRIPTIONAttach the pair of scissors to the base with 2screws.
BRIEFPLOOIER 1.4
/
2 min
Screwdriver
screws
1 part added
€ 0,50
9DESCRIPTIONAttach the 4 anti slip caps to the back of thebase plate.
BRIEFPLOOIER 1.4
/
1 min
/
4 anti slip caps
4 parts added
€ 1
TECHNICAL ADDENDUM
http://designforeveryone.howest.be/
Laser cut in MDF plate 6 mm
TEAM CONTACTS
http://designforeveryone.howest.be/
[email protected] +32 479 65 57 86
[email protected] +32 474 23 15 46
[email protected] +32 474 55 63 80
[email protected] +32 479 57 65 23
http://designforeveryone.howest.be/
[email protected] +32 51 24 61 90
