Upload
jeffschork
View
636
Download
3
Embed Size (px)
DESCRIPTION
Westbury Aluminum Railing Training
Citation preview
Larry Burkholder, CFPTraining Manager
Boxed Railing System
A A “Green”“Green” Railing System Railing System
Using a minimum 40% post-industrial content in Using a minimum 40% post-industrial content in the aluminum billet prior to extrusionthe aluminum billet prior to extrusion
Zero Volatile Organic Compound (VOC) emission Zero Volatile Organic Compound (VOC) emission from the powder coating processfrom the powder coating process
Qualifies for LEEDS Points as established by USGBCQualifies for LEEDS Points as established by USGBC
Style Names
SeriesNumber
ProductDescription
ModelName
C10*/C101 2-Rail Railing System Tuscany
C20 2-Rail Railing System w/Architectural Balusters Montego
C30*/C301 3-Rail Railing System Riviera
C30R*/C301R 3-Rail Railing System w/Rings Riviera "R"
C31*/C311 3-Rail Railing System w/all spindles extending to top rail Riviera I
C32*/C321 3-Rail Railing System w/every other spindle extending to top rail Riviera II
C33*/C311 3-Rail Railing System w/every third spindle extending to top rail Riviera III
C34*/341 3-Rail Railing System w/every fourth spindle extending to top rail Riviera IV
C70* 2-Rail Glass Panel Railing System Veranda
•Passes International Builders Code with a Code Compliance Research Report # 0163
• Can be installed on all commercial projects with no height restrictions
Satin BlackSatin Black
DSI 101Bronze Fine Texture
DSI 106SilverDSI 125
Sandy ShoreDSI 122
Black Fine TextureDSI 106
Gloss BeigeDSI 104
Gloss WhiteDSI 102
ChocolateDSI 124
Ninety BronzeDSI 131
ClayDSI 128
Speckled WalnutDSI 121
White Fine TextureDSI 123
Color Selection
Color Selectors
• Westbury Color Selector is 4” X 6”
• Westbury Mini Color Selector is 2” X 3 ½”
• Both include all Westbury standard colors
Architectural Grade Powder Coating Options
•AAMA 2604 Architectural Custom Colors•Contact DSI Customer Service for quotation
• Upgraded AAMA 2605 Architectural Custom Colors• Contact DSI Customer Service for quotation
•Customer specified custom colors•Contact DSI Customer Service for quotation
Architectural CoatingTouch Up Options
Three Step Order Process
• Step 1• Determine Westbury options needed for your project:
• Model/Style, Color, Height, Length, Straight, Stair
• Step 2• Determine Westbury post style if project requires posts:
• 2”, 2 ½, 2 ½’ Power Post, 4”, 6”• Straight and corner crossover available for 2” and 2 ½” Power Post
• Step 3• Determine Westbury special hardware or accessories:
• Flat or ball post cap• Magena Star Lights• Left/Right angle swivel mounts• Special rise and run stair swivel mounts• Compound swivel mounts
Key Sales Features
• Manufactured and extruded in the USA• Architectural Grade Powder Coating with a Lifetime Limited Warranty and a five year weathering guarantee based on PCI and AAMA certifications• Posts with a leveling feature• Uninterrupted stair and straight crossover options• Assembles without screws, welds, rivets or fasteners at s spindle rail connection points• CCRR#0163 testing documentation meeting IBC, IRC, and FBC codes up to 42” tall and 8’ long including posts.• Twelve standard colors• Boxed/Packaged system. Everything needed between the posts is packaged in the box
• Custom colors optional with unlimited color choices.Custom colors optional with unlimited color choices.
• Railing in a box with rails, spindles and mounts.Railing in a box with rails, spindles and mounts.
• Secure factory packaging that will eliminate freight damage.Secure factory packaging that will eliminate freight damage.
• Lifetime Limited Warranty with five year weathering (AAMA 2604) Lifetime Limited Warranty with five year weathering (AAMA 2604) warrantywarranty
• Hidden screws on all mounts.Hidden screws on all mounts.
• Enclosed extrusions on top, mid or bottom rail.Enclosed extrusions on top, mid or bottom rail.
Specifications
• 36” and 42” Railing Heights
•Boxed 3’, 4’, 5’, 6’, 7’, and 8’ sections
•Section is measured from inside of post to inside of post
•Boxed stair rail sections in the same lengths
•Post leveling feature for uneven decks
• All hardware is zinc die cast for improved corrosion resistance
Specifications
• 0.75” x 0.75” (0.053” wall) spindles spaced 3.875” 0.75” x 0.75” (0.053” wall) spindles spaced 3.875”
•.75” (.060” wall) round spindle spaced 3.875” .75” (.060” wall) round spindle spaced 3.875”
• 1.75” (0.090” wall) W x 1.375” (0.085” wall) top rail 1.75” (0.090” wall) W x 1.375” (0.085” wall) top rail
• 1.75” (0.090” wall) W x 1.25” (0.120” wall) mid and 1.75” (0.090” wall) W x 1.25” (0.120” wall) mid and
bottom railbottom rail
• 6005 T6 aluminum alloy with zinc die cast hardware and 6005 T6 aluminum alloy with zinc die cast hardware and stainless steel fastenersstainless steel fasteners
• Certified PCI 4000 A2 (AAMA 2604) and A3 (AAMA 2605) Certified PCI 4000 A2 (AAMA 2604) and A3 (AAMA 2605) architectural powder coatingarchitectural powder coating
• Twelve standard colors Twelve standard colors
Specifications
CCRR# 0163
• Westbury has a CCRR-0163 number
• CCRR is an acronym for Code Compliance Research Report
• Testing completed by ATI Evaluation Services, York, PA
• Tested as specified by ICC-ES 273
• Meets International Building Codes (IBC), International Residential Codes
(IRC) and Florida Building Code (FBC)
• Test Includes C10, C30R, C31, C32, C33, and C34 up to 42” tall and
96” in length and C70 42” tall and 72” in length
• Power Post required for commercial installations.
•Post listed below have a post levelling feature and flairsPost listed below have a post levelling feature and flairs
• 2” x 2” x 37” or 43” (0.090” wall) posts 2” x 2” x 37” or 43” (0.090” wall) posts
• 2” x 2” x 47” or 53” (0.090” wall) stair posts. 2” x 2” x 47” or 53” (0.090” wall) stair posts.
• 2” X 2” X 36” or 42” (0.090” wall) straight or corner crossover posts 2” X 2” X 36” or 42” (0.090” wall) straight or corner crossover posts
• 2.5” X 2.5” (0.125” wall) residential post2.5” X 2.5” (0.125” wall) residential post
• 2.5” X 2.5” (0.125” wall) commercial Power Post (IBC codes)2.5” X 2.5” (0.125” wall) commercial Power Post (IBC codes)
• 4” and 6” Decorative posts (.090” wall) 37”, 43”, 47”, & 53”4” and 6” Decorative posts (.090” wall) 37”, 43”, 47”, & 53”
• 4” Decorative sleeves (.065”) wall 37”, 43”, 47”, & 53”4” Decorative sleeves (.065”) wall 37”, 43”, 47”, & 53”
• Facia mount and core drill posts offered Facia mount and core drill posts offered
Post Options
2 ½” Power Post
• Meets IBC Commercial Code requirements• Base is screwed to the post with 6 screws and welded around the entire post
Deco Post
• 4” and 6” aluminum posts• Flat Cap or Ball Cap (6” flat cap only)• Leveling feature standard• 2 part flair for 4” post• 1 piece flair for 6” post• Available in standard post lengths• Crossover hardware Is not available
Post leveling systemstandard on all posts
Two part snap together zinc die cast flair available for posts
Packaging
• 2 each 4’ C10 sections and 4 posts shown
• Sections include rails, spindles, hardware, and instruction sheets
• Post include leveling feature and 2 shims
• Caps and flairs sold as a separate SKU
Rail Designs
Top Rail Mid Rail Bottom Rail
Note: PVC Insert Baluster Retainers
• Screws provided to attach to Westbury post• Wall mounts can attach to a wall or other post types
Standard Post Mounts
Crossover Mounts
Straight Crossover
Stair Crossover
CornerCrossover
Standard Stair Mounts Angle 29° to 41° Rise
• Excellent Aesthetics
• Excellent adjustability
• can utilize straight cuts
• Section itself will only rack up to 36 degrees
Swivel Stair Mounts 0° to 42° Rise
Stair Rail Parameters
• Straight railing sections will rise from 0° to 10°
• Rout dimension is 0.79” X 0.81”
• 0° rise or straight rail will use standard straight rail mounts
• 1° to 10° rise require stair swivel stair mounts
• Sections can be purchased with or without mounts to accommodate this application
Stair Rail Parameters
• Stair Rail from 11° to 28° rise
• Rout dimension of standard stair rail is .79” (W) X 1.02” (L)
• Optional custom routes are available for a cleaner look if standard route leaves unacceptable spaces beside the spindle
• 11° to 28° rise will use swivel stair mounts
Stair Rail Parameters
• Stair Rail from 29° to 36° rise
• Rout dimension of standard stair rail is .79” (W) X 1.02” (L)
• Optional custom routes are available for a cleaner look from 29° to 32°. This should be very rare
• Stair mounts included with standard stair sections will accommodate 29° to 32° rise
• Standard (IBC code) rise is 32° to 36° (7” rise and 11” run)
Stair Rail Parameters
• Stair Rail from 37° to 41° rise
• Rout dimension is customized to customer specific rise and run
• Swivel stair mounts to be sold unless a customer requests standard stair mounts.
Stair Rail Parameters
• Stair Rail from 42° to 43° rise
• Rout dimension is customized to customer specific rise and run
• Stair swivel mounts are the only choice
Swivel Angle Mount
Compound Swivel Mounts
Welded Corner Options
Adjustable Height Bottom Rail Supports
Included with C10 Tuscany and C20 Montego 7’ and 8’ lengths, all Riviera three rail models 5’, 6’, 7’, and 8’ lengths, and radius sections
Decorative AluminumPorch Posts
• 0.090” wall• 4” & 6”• 8’, 9’, & 10’ tall•Will support in excess of 10,000 pounds
Mounting Hardware
Capital &Base
4” and 6” Deco Porch Posts
Deco Post, Porch Post, C10 Tuscany,And ScreenRail Screen Room System.
Multi color kits can be ordered as shown below
Curved or Radius Sections
Measurement of Straight Axis
Railing Line
Offset to Railing line
• Customer provides distance of a straight axis and the distance from the center of the straight axis to the fence line for each radius
• Engineering will determine the radius with this information
• Too many variables exist in the field for order entry to do take-offs for radius sections
• Customer is responsible to order quantity of sections in each radius
• We recommend ordering sections extra long and fitting on the jobsite
• 1-26 inch offset
Curved or Radius Sections
C10 (C101 Round Spindle)TuscanyTwo Rail System
• Architectural Balusters may need to be spaced closer on radius sections to retain less than 4" clearance.
• The last Baluster may need to be spaced closer to the post to retain less than 4" clearance.
C20 Montego(Architectural Balusters)
Montego(Style C20)
Riviera(Style C30/C301)
6' Section
NOTE: 7' and 8' Sections will have one spindle in themiddle between the top and mid rails for extra support.
Riviera(Style C30/C301)
Riviera "R"(Style C30R/C301R)
6' Section
Riviera "R"(Style C30R/C301R)
6' Stair Section
Riviera "R"(Style C30/C301)
Riviera I(Style C31/C311)
6' Section
Riviera I(Style C31/C311)
Riviera II(Style C32/321)
Sections
3'
4'
5' 6'
7'
8'
Riviera II(Style C32/C321)
Riviera III(Style C33/C331)
Sections
3'
4'
5' 6'
7'
8'
Riviera III(Style C33/C331)
'
'
Riviera IV(Style C34/C341)
Sections
3'
4'
5' 6'
7'
8'
Riviera IV(Style C34/C341)
• Available in 3', 4', 5', and 6' lengths.• 36" and 42" tall.• Solid glass panel system.• Top and bottom rails are the same shape as all other
Westbury models.
C70 Veranda(Glass Railing System)
• EPDM rubber gaskets inside the top and bottom rails.
• EPDM rubber is the same type of material used on automotive windshields.
• Tempered glass is seated 1/2 inch in the EPDM gasket on the top rail and bottom rail after installation.
• Gasket is the full length as the glass panel on the top rail and bottom rail.
• 2 7/8" air-space on either end of solid panel.• All stair rail glass is special order
Veranda(Glass Railing System)
Veranda(Glass Railing System)
• ¼” Residential tempered glass standard• 3/8” Commercial tempered glass (required for IBC) code optional. • Tempered glass cannot be altered in the field• ¼” tempered glass in stock for 3’, 4’, 5’, and 6’ sections 36” and 42” tall• Other glass dimensions special order• Veranda can be purchased without glass infill• Veranda aluminum components are packaged like other Westbury models
Veranda Glass Railing
Veranda Glass Railing
Veranda(Style C70)
C70 Veranda
C70 Veranda
C70 Veranda
Walk Gates
Walk gates offered for all Westbury models
• Fully welded to match all railing styles• Self closing and lockable polymer D & D Hardware System• Optional powder coated stainless steel hinge and gravity latch system• 36” X 36”• 36” X 48”• 42” X 36”• 42” X 48”• All dimensions are for the opening
Walk Gate HardwareWalk Gate HardwareMagna-Latch, Z-Lock, Lokk Latch Deluxe, Tru-Close HingeMagna-Latch, Z-Lock, Lokk Latch Deluxe, Tru-Close Hinge
Displays
C10/C101
C30R/C31C301R/C311R
C30/C301
C70 withClear Glass
Displays
6” X 8” Bronze and Gray Panels
C70 Gray Glass and Satin Black Powder Coating
C70 Bronze Glass and BronzeMetallic Powder Coating
Banner
Power Post Display
C10 Floor Display
• 4” Hand Held
• 4” Table Top (Shown)
• 6”” Hand Held (Shown)
• 6” Table Top
Deco Post Displays
4” and 6”Table TopDisplays
4” and 6” Deco Porch Posts
Mini Floor Display
• 36” tall with metal base
• Westbury C-10 with Falcon/TRX
• White vinyl with Black Fine Texture Powder Coating
Waterfall Floor Display
• 36” tall with 4’ • metal base
• Waterfall design
• Westbury C10 with Falcon/TRX
• Falcon/TRX with half vinyl and half “B”Series spindles
• White vinyl with Black Fine Texture powder Coating
Waterfall Floor Display
DeluxeFloor Display
•Displays 26 products.
• Working solar and LV lights and transformer included
• Offered with Falcon/TRX, C10, C30, C70, CHR, Magena Star
• Wood base with generic deck board
DeluxeFloor Display
Components
1⅜" Handrail (.140” wall)
InternalConnector
Collar Rings
Handrail Return
Wall Return
Handrail Elbows(5°, 31°, 34°, and 36°)
90° Handrail Elbow
Inside Corner Mount
Internal End Cap
Wall Mount
ADA compliant and meets IBC & IRC codes8’ 12’ & 16’ lengths
Certified PCI4000 A2 (AAMA 2604)And A3 (AAMA 2605) Architectural
Grade Powder Coating
•Certification program created by the Powder Coating Institute
•ISO or QS9000 type of certification
•164 point powder coating operations audit
•Conducted annually
•A2 is certification for AAMA 2604
•A3 is certification for AAMA 2605
•Third party AAMA test results required every 18 months
•Only company in the fence and railing industry with the
PCI4000 A2 (AAMA 2604) and A3 (AAMA 2605) certification
Certified PCI4000 A2 (AAMA2604)And A3 (AAMA 2605)
Verified AAMA 2604-13 Compliant
Optional Verified AAMA 2605-13 Compliant
Certified PCI4000 A2 (AAMA2604)And A3 (AAMA 2605)
Companies Verified AAMA 2604-13 Compliant as listed on www.aamanet.org
November 1, 2013
Companies Verified AAMA 2605-13 Compliant
November 1, 2013, www.aamanet.org
AAMA Performance Requirementsfor Pigmented Organic Coatings Defined
Certified PCI4000 A2 (AAMA2604)And A3 (AAMA 2605)
Certified PCI4000 A2 (AAMA2604)And A3 (AAMA 2605)
Warranty
The Marketing Edge
• Located on the coast in Gulfport, MS• Photo taken 4 ½ years after installation• Westbury Railing System has a Certified PCI 4000 A2 (AAMA 2604) architectural grade powder coating • Steel deck and framework fabricated by a local fabricator• Polyester TGIC Powder Coating matched when installed• Westbury has a Lifetime Limited and a 5 year weathering warranty• Westbury warranty states the color will not fade more than 5 Delta E color units and retain 30% of its gloss level for 5 years• Westbury is the only metal railing system with a weathering warranty• See the difference over time• Sell the difference over time
Two Overhead Conveyor PCI 4000 CertifiedTwo Overhead Conveyor PCI 4000 CertifiedPowder Coating Systems Powder Coating Systems
Line 1•New 2005•450’ Conveyor•5 Stage aluminum pretreat•10 Automatic and 2 manual powder guns•Spray to waste powder booth
Line 2•New 2013•850’ Conveyor•5 Stage aluminum pretreat process•18 Automatic and 2 manual powder guns•Reclaim powder booth in an environmental r room
10 Step Powder Coat Process10 Step Powder Coat Process
Step 1—Raw incoming aluminum is never exposed to outdoor elements. Aluminum is inspected and free of blemishes. Fabricatedcomponents are fixtured (background) and hung on the overhead conveyor
Step 2—Product enters pretreatment to remove fabrications oils and debris. The First stage is a heated acidic cleanerStep 3—City water rinseStep 4---Recycling R/O water rinseStep 5—Fresh R/O water rinseStep 6---Dried in place aluminum sealer
Step 7---Product exits the pretreatment process and a 200 MPH air blast removes water drops (left).
Step 8---Product enters and exitsa dry off oven and is ready to have the powder coating applied(right)
Step 9—Product enterspositive pressure climatecontrolled environmentalroom. Photo eyes readproduct and determine how many of the 18 gunswill be used. One preautomatic and one postautomatic manual gunsare available if needed.Full reclaim quick colorchange booth by ITW
DSI’s powder coating is aCustom Blended PremiumPigmented Super Durable Polyester TGIC(triglycidyl Isocyanurate) Architectural GradePowder Coating
Step 10—Product enters andexits 400° cure stage. After cure stage product is unloadedand sent to assembly or packaging work cells.
Ten pretreatment titration checksare completed and logged twiceper shift. Ten QC checks, onproduct coming off the powdercoating line, are completedand logged every hour
Have a prosperous 2014!
Thank you…good selling!
The Clear Choice