Upload
friendsandcompany36
View
0
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Working in the control room of a plant is an important task for any operator, and before they can do their job, they must first learn how to recognize the signs of instrumentation failure. This is where Hazard and Operability Study training comes in. The purpose of this training is to teach site personnel how to diagnose common primary and secondary faults using the change in instrumentation readings as indicators. A good H&O study enables operators to know approximately when a problem will occur in the system – thus avoiding equipment overloading and damage. TheSafetyMaster is the Top Safety Consultants in India providing Hazop study and training.
Citation preview
Hazard and Operability Study - an overview
A Hazard and Operability Study is an analysis of the major factors involved in a situation that can
determine the outcome to a large extent. It specifically deals with events that could lead to
significant losses or production issues within a facility. This study has many applications in law,
safety engineering, risk assessment, and other disciplines concerned with health, operations, and
production improvement.
Hazard and Operability Study is a risk analysis method used in industrial management to determine
and eliminate unsafe situations or improve them to a safe level. This occurs through analyzing
incidents associated with the industrial equipment over time. H&Os have become one of the most
widely used methods to analyze hazards, largely due to their effectiveness in identifying factors that
could lead to injury, illness, or death. By looking at the incidents that have occurred in the past,
operators can pinpoint failures in industry equipment or procedures. Following the analysis of
events, an operator will then correct these issues through modification of procedures or applying
new technology.
Hazard and Operability Study is a study carried out in order to safely assess any systems or any
processes associated with the operation. The study is conducted by collecting all relevant data about
the system followed by analyzing them. The HOS are often required for manufacturing organizations
when they want to improve the overall safety of their operations or plants. In fact, HOS helps you to
identify hazards and minimize risk while improving your processes.
Working in the control room of a plant is an important task for any operator, and before they can do
their job, they must first learn how to recognize the signs of instrumentation failure. This is where
Hazard and Operability Study training comes in. The purpose of this training is to teach site
personnel how to diagnose common primary and secondary faults using the change in
instrumentation readings as indicators. A good H&O study enables operators to know approximately
when a problem will occur in the system – thus avoiding equipment overloading and damage.
TheSafetyMaster is the Top Safety Consultants in India providing Hazop study and training.
How we can help
Onsite/Online Training
Proper Documentation for Hazop study
Providing consultation and conducting Hazop study
For more info:-
Visit: - https://www.thesafetymaster.com/
Email: - [email protected]
Call: - +91-1493-220093