Anti-Reflection Coating
Piezo Nebulizer with SUS316L mesh for
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent. Nebulizer is
a good solution for medication of asthma, lung, Respiratory tract,
trachea disease. But Pd-Ni mesh is too expensive. Now we found new
technology to produce mesh with SUS316L and the performance even
better than Pd-Ni mesh. Of course, its a low cost
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent.
IntroductionNebulizer with SUS 316L mesh for medicationPatents for
precision micro-etching technologyAverage particle size:
approx.3mLow power 0.3ml/min by 0.8WGood reliabilityGood corrosion
resistant to acid, alkali, and organic solvent
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent.
Assembling
Sprinkler [email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent. Specification
type 1Description Unit Min Typ Max Note CapacityC (nF) 2341Vrms,
1kHz Frequency Fr (kHz) 105110115Number of meshN/A 1100 Diameter of
meshm 2- 4Diameter of nebulizer mm 19.9 20 20.1 Thicknessmm 0.67
0.75 0.82 Wire mm 23 28 33 Diameter of wire mm 0.60 0.70 0.80
Nebulization rate g/min 0. 3Depends on power
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent. Specification
type 2Description Unit Min Typ Max Note CapacityC (nF) 2341Vrms,
1kHz Frequency Fr (kHz) 105110115Number of meshN/A 2200 Diameter of
meshm 2- 4Diameter of nebulizer mm 19.9 20 20.1 Thicknessmm 0.67
0.75 0.82 Wire mm 23 28 33 Diameter of wire mm 0.60 0.70 0.80
Nebulization rate g/min 0. 5Depends on power
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent. Compare with
Pd/Ni & SUS316 mesh
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent. Compare with
Pd/Ni meshMore simple structureSame performanceRaw materials
quality easy to controlLow materials costHigher reliability
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent.
AdvantagePatens for SUS316L meshOwn advanced etching linePrecision
laser processingClean room for laser process and assemblyPiezo
elements and modules design manufactory experiencePiezo application
package solution
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent. Own advanced
Etching Process
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent. 1018Prior to
the bonding process, we need to prepare the target and Backing
Plate (B/P), separately. For the target, we need to plate a bonding
adhesion layer on the new target and then do some necessary
masking. For B/P, the real used B/P need to be de-bonded from the
returned target, supplied by the custom. Certainly, some necessary
cleaning and masking processes should be well done before the
de-bonding. After both are ready, a series bonding sequences could
be executed, which include the Bonding, Correct Warpage, Ultra
Sonic C-Scan Test, Polishing, Cleaning, Washing, Drying, Final
Inspection and the Packing/Shipping processes.
AMOLED R/G/B sub-pixel depositionSub-pixel size: 30um width ~
100um width Tolerance 5umTape Angle : 50~60, Step Height : 5umSheet
thickness 30um/40um/50um48 um
46 um
50um55
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent. Precision
laser processing
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent. Test
video
[email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent.
Thank [email protected]
FineMat. Applied Materials Co., LTD, proprietary information, do
not copy or distribute without prior written consent.
![[DESIGN] Piezo-Piezo to Pie](https://img.dokumen.tips/doc/110x75/5571f8bb49795991698df909/design-piezo-piezo-to-pie.jpg)
