Upload
lloyd-preston
View
242
Download
5
Embed Size (px)
Citation preview
LDPE Autoclave Reactor Motors
www.atbmorley.com
LDPE Autoclave Reactor Motors
EXPERIENCE
Founded in 1897, ATB Morley design and manufacture high reliability motors for arduous applications and environments. Since 1995 we have supplied ICI licensed motors specifically for LDPE autoclave reactors. Our range includes:
• Mark 1• Mark 7(A)• Mark 10 • Mark 15(A)
In addition, we manufacture designs for other licensors:
• Rex 3, MU400 and MU225 Autoclave stirrer motors can be designed for any bespoke rating and voltage.
These motors have been installed around the world, including: North and South America, Europe, Middle-East, Africa, Far East and Australia.
INSULATION SYSTEM
ATB Morley have identified the insulation systems as one of the key areas to ensure the reliability of LDPE stirrer motors.
The stator slot liners are made from a material resistant to the attack of vinyl acetate; they are totally free of polyester.
The winding is impregnated using a VPI process with a particularly suitable class H epoxy resin.
Finally, the finished impregnated winding is over-coated with a specially selected armouring epoxy resin (also class H). This is chosen particularly for its excellent chemical resistance and its “glazed” finish to further resist erosion. The completed system is now proven to minimise downtime and therefore increase plant productivity.
ATB Morley is one of the few manufacturers of stirrer motors for inside chemical reactor vessels. Our experience in the design and build of in-process motors for the polymerisation of ethylene gas gives us a unique knowledge of this specialist area.
Bespoke to Specification
REPAIR, OVERHAUL & REPLACE
ATB Morley offers a comprehensive after sales service specific to LDPE autoclave reactor motors, encompassing strict quality management systems to ensure reliable compliance with agreed procedures and quality standards.
This includes:
Level 1 Strip, examine & dimensional check, bearing assessment, insulation check, clean all components, reassemble, abbreviated running test and anti-rust treatment in preparation for dispatch.
Level 2 Level 1 + Standard overhaul, including: replace mechanical parts such as bearings, terminal sockets and connectors. Mechanical overhaul
Level 3 Level 2 + Stator rewind The warranty is revalidated after each level. For superior build quality and peace of mind, contact ATB Morley with your requirements on 0113 257 1734 or visit www.atbmorley.com
UPGRADE
Since ICI began the initial design of autoclave reactor motors in the 1930’s, many advances have been made in both materials and technology. These include:
• Improved lamination steel• Enhanced insulation material and systems• Introduction of inverter drives VV/VF• Thermal protection/detection devices
As a result of this, we are now able to offer - within the original motor envelope - increased motor outputs (kW) at optimum speed, providing increased productivity. MANUFACTURE & TESTING
All ATB Morley LDPE autoclave reactor motors are manufactured in house at our Leeds facility.
This includes onsite:
• Fabrication• Machining• Winding• Assembly• Test
Stirrer motors are custom-designed for your application, the stator is fitted directly into the user vessel and utilises an enhanced insulation system, allowing it to withstand high temperature gases which flow through the motor whilst lubricating the bearings.
ATB Morley Ltd Ruskin Street Stanningley West Yorkshire LS28 6QA UK Tel: +44 (0) 113 257 1734 Fax: +44 (0) 113 257 0751 E-mail: [email protected] www.atbmorley.com
in
Follow us on Social Media:
Part of Something Bigger
ATB Morley are a subsidiary of the ATB Group, who employ over 3,500 people across the globe. The ATB product range extends from 25W to 25MW and includes standard solutions, customised solutions and design-to-order solutions, including complete drive systems for an extensive range of applications:
MINING POWER GENERATION
MARINE DEFENCEINDUSTRIAL OIL & GAS
ATBM026 V0