Upload
gamnes-farm
View
354
Download
3
Embed Size (px)
Citation preview
TWINS Magravs, 95% and 96.5 of redcution
Presented by:KF SSI Togo Team
KESHE Family Togo/Keshe Foundation Togo
TWINS Magravs, 95% and 96.5 of redcution Presented by: Paul YATOUTE Maguiman03.11.2016
Coil fabrication
The copper
The copper is 1.5 mm2
4
Process of puting out gain
Fabrication of coil
We turn the coil on Anti-COIL WAY144 and 81 turn inner and outer coil
Connexion according to the diagram of KF
Nano coated on fire I
Mix 3 GANS: CH3,CO2 and CUOWe mix 3 GANS togheter and put the coil we nano coated with fire inside.
Dry the coil after puting in the GansWe dry the Coil after the processing in the GANS
Hydrogen on coil
Put soda costica in the hot water,Put aluminium mesh on the bottom(the one we use is green)Put alluminim on the water of soda costicaPut the dry coil with gans on it and cover it for 24h
RemarkWe remark that when we put the aluminium in the soda costica,put coil and cover,we remark that in 24 H,the mixing turn in black color and the is one gans black in the down of the bottom
Dry the coil after hydrogen process
We dry again the coil after hydrogen process
GANS PROCESSWe use Sheet metal connected to the nanocoated copper coil We put soda costica in the hot waterAnd put it in the boxe where we connected sheet metal with the coil at the distance of 12 cmWe get blue gans
NB:By inspiration, i use it to spray the coil.I didnt wash this gans because there is no compact gans at the down of bottomOnly the color change in the blue.
Blue gans use to spray the coil
The coil Ready for conexion
Differente materials
Differente materials
Capacitor fabricationWe take aluminium paperWe the toilet paper and put on the aluminium paperWe spray the mixing of 3 gans(CH3,CO2 and CUO) on the paper wich is on aluminiumWe dry itNB:I constate there is some things like seed on the the drying process.You can observe it ton the next picture.
Capacitor fabrication
Capacitor fabrication
We roll the copper nanocaoted with the aluminim Paper where we have the drying gans on the paper.We turn it on anticlock way until it become hard.
Capacitor coil 45 turns
Capacitor fabrication
We roll the coil on aluminium
Capacitor conexionWe connected (-) together and (+) of capacitor toghether and the (-) of capacitor to the (-) of the stacker and the (+) goes to the (+) of stacker.I use 3 capacitors for one magrav .
RemarkWe notice that, there is small salt inside because we use one gans water of CO2 to mixe in the 3 gans mixing where i make with salt
The boxes
The twins magrav wich give 95%We plug the first magrav extention like you see on the picture
The twins magrav wich give 95% reductionWe plug the rest with the energy source and use the extention for the connection with the house
The twins magrav with 9 capacitors for 96.5% reductionSame circuit of conexion with but we incresae the capacitors: 9 capacitor for one magrav so 18 capacitor for the twins magravs.
The twins magrav with 9 capacitors for 96.5% reduction
THANKS