Place the box net face down
Fix the sides in place using the yellow fasteners
Get the net for the bracket
Bend the bracket into shape
Fix the back of the bracket with a yellow fastener
Place the bracket on the top of the main box
Fix the bracket in place with 2 yellow fasteners
Thread the axle through one side of the box and an egg cam
Thread the axle through the other side of the box
Hold the axle in place with sponge washers
Add the second axle and the crank. Try you mechanism and draw an annotated diagram
Finished! You have completed the egg cam mechanism
Take apart the egg cam mechanism until left with box
Attach the side of the box with the bracket
Add the axle and snail cam
Hold axle in place with sponge washers
Add the second axle and crank
Now test and draw an annotated diagram of your snail cam mechanism
Take apart the snail cam mechanism and add an eff cam through the centre
Hold the axle in place with sponge washers
Draw a line along the top 3 dots of the beam net
Cut through the sides of the beam net where the line is drawn - DON’T cut through the middle!
Score the middle along the drawn line
Bend up the sides of the beam
Attach the beam. Draw an annotated diagram of your egg cam beam mechanism
Add legs and a snail cam. Draw an annotated diagram of your snail cam beam mechanism