Upload
omkar5793
View
319
Download
3
Embed Size (px)
DESCRIPTION
university last year question papers for geometric modelling
Citation preview
Practical ExaminationSubject: Geometric Modeling Time: 2.00 HrsMarks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions:
1. Using suitable geometric modeling software solve the questions.2. Take printout for question number 1 & 2. 3. Submit attached (a) Question paper (b) printout pages to the supervisor.4. Write Examination seat number in printout page as well
_______________________________________________________________________
Q 1 Create the model as per the dimensions given in following figure 1 30 marks
OR
1
Figure 1
Practical ExaminationSubject: Geometric Modeling Time: 2.00 HrsMarks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions:
1 Using suitable geometric modeling software solve the questions.2 Take printout for question number 1 & 2. 3 Submit attached (a) Question paper (b) printout pages to the supervisor.4 Write Examination seat number in printout page as well
_______________________________________________________________________
Q1 Create the model as per the dimensions given in following figure 1. 30 marks
2
ORPractical Examination
Subject: Geometric Modeling Time: 2.00 HrsMarks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions:
1 Using suitable geometric modeling software solve the questions.2 Take printout for question number 1 & 2. 3 Submit attached (a) Question paper (b) printout pages to the supervisor.4 Write Examination seat number in printout page as well
Q1 Create the model as per the dimensions given in following figure 1. 30 marks
3
Figure 1
Figure 1
OR
Practical ExaminationSubject: Geometric Modeling Time: 2.00 HrsMarks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions:
5 Using suitable geometric modeling software solve the questions.6 Take printout for question number 1 & 2. 7 Submit attached (a) Question paper (b) printout pages to the supervisor.8 Write Examination seat number in printout page as well
_______________________________________________________________________
Q1 Create the model as per the dimensions given in following figure 1. 30 marks
4
Figure 1
ORPractical Examination
Subject: Geometric Modeling Time: 2.00 HrsMarks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions:
9 Using suitable geometric modeling software solve the questions.10 Take printout for question number 1 & 2. 11 Submit attached (a) Question paper (b) printout pages to the supervisor.12 Write Examination seat number in printout page as well
_______________________________________________________________________
Q1 Create the model as per the dimensions given in following figure 1. 30 marks
5
Figure 1
Practical ExaminationSubject: Geometric Modeling Time: 2.00 HrsMarks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions:
13 Using suitable geometric modeling software solve the questions.14 Take printout for question number 1 & 2. 15 Submit attached (a) Question paper (b) printout pages to the supervisor.16 Write Examination seat number in printout page as well
6
Figure 1 OR
_______________________________________________________________________
Q1 Create the model as per the dimensions given in following figure 1. 30 marks
7
Q 1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
8
Figure 2
Figure 3
Figure 1 OR
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
9Figure 3
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
10
Figure 2
Figure 3
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
11
Figure 2
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
12
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as
per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
13
Figure 2
Figure 3
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
14
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
15
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
16
Figure 3
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
17
Figure 3
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
18
Figure 3
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
19
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
20
Figure 3
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
21
Figure 3
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
22
Figure 3
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
23
Figure 3
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
24
Figure 3
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
25Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
26
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
27
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
28
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and
create the assembly using suitable
constrains.
20 marks
29
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and
create the assembly using suitable
constrains.
20 marks
30
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
31
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly 32
Figure 3
Figure 2
using suitable constrains. 20 marks
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
33
Figure 3
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
34
Figure 3
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
35
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
36
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
37
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
38
Figure 3
Figure 2
Q1 Create the model as per the dimensions given in following figure 2. 30 marks
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
39
Figure 3
Figure 2
40
Figure 3