Upload
balastslide
View
122
Download
1
Embed Size (px)
Citation preview
FRAME LOOM CONSTRUCTION PROCESS
NAME: Marisol Tordoya y Nisrine Saibari Group: 2nB
1. Measure the five strips with the ruler. Use the dimensions in the plan
STEP 1
2. Saw the strips with the saw using the clamps
STEP 2
3. Sand the edges with sandpaper.
STEP 3
4.Make holes in two strips with drill.
STEP 4
5. Saw the wooden sticks. Use the dimensions in the plan.
STEP 5
6. Sand the longest wooden sticks making a curved edge.
STEP 6
7.Saw a gap in the shortest sticks.
STEP 7
8.Glue and nail the frame and the wooden sticks.
STEP 8
9. Open fifteen paper clips and ply them with the pliers.
STEP 9
10. Saw the gaps in the plastic strip.
STEP 10
11.Put the paper clips through the holes.
STEP 11
12.Put the thread between the paper clips and the plastic band.
STEP 12
13. Start weaving fabric passing the weave throught the warp.
STEP 13