John T. ChiangPresident
TYC is almost 60 years old. The establishment and flourishing of the company mirror the economic growth of Taiwan since the 50s. After the war, Taiwan started its own economic endeavor. From an agriculture-based economy, Taiwan went through the reconstruction of infrastructures and started to focus on manufacturing. Greatly weakened by the war, it was through the diligence and resilience of the people that the country achieved a rapid growth within half of a century. Amid the wave of industrialization was TYC, first established in the post-war Taiwan in the 50s, in an environment that was far from ideal. So much so, that the first shipment of steel material to TYC had to be transported to the plant by oxcart. It was in such a harsh time, that TYC started to make chains for bicycles and pedicabs, the then common transportation means. Ahead of other parts makers in the same industry, TYC very early on started to make exports of the bicycle chains to the world, and once became the largest bicycle chain manufacturer. However, TYC did not stop there. In the 70s, Taiwan went through an industrial transformation. Following government policies, it gradually steered away from the labor-intensive industries and stepped into sectors of high-tech, high value-added products. Coinciding with such business environment and global trends, TYC went through its own transformation, multi-dimensionally. Within the next 30 years, the company established two branch factories overseas; it greatly increased product offerings; and most importantly, its endless pursuit for the better quality brought the company to a new level. Today, TYC is one of the major chain suppliers whose name is recognized world-wide, and its offering to the market is considered tier-one.
Diligence and frugality - those are the two principles of life that Chinese people highly valued. Going back in time, diligence in an agricultural society means to work hard in the field; frugality means to preserve for the future. In a modern industrial mind, diligence is the continuous research and development and the persistent pursuit for innovation and higher quality. Frugality elaborates on the endless efforts to increase efficiency, improve precision while reducing waste in order to maximize the return for customer. These are the principles held at TYC. This value system keeps us motivated. It is a non-stop effort to always try to service customers better by continuing challenging ourselves.
Our core strength lies in the people. We are proud to have a group of hard working, enthusiastic and forward-thinking employees. It is through them that the new products, the top quality products, and the product know-how are realized. It is the same group of people that makes this new catalog happen. To categorize and summarize our vast product lines is a meticulous process. This catalog took over a year to accomplish, in order to make sure the precision and conciseness of the data. Hopefully, you will see the efforts when using this catalog to choose a piece of chain. This catalog presents, and represents, the painstaking effort of TYC to provide solutions to the drive and conveyor applications. We hope you find it useful as much as we find it valuable.
60 years of TYC - and we continue thriving forward.
4 5
ORIGIN And DEVELOPMENT 1950
1970
1990
2000
2010 and forward
2
The introduction of Super Series & API Series to TYC's product family.
Production of motorcycle timing chains to start in 2005.
Thailand plant to acquire hot forging capability.
Product expansion to include welded steel and combinationchains. Production is in China plant.
The development and manufacturing of escalator step chains for Taipei MRT.
The development of 1500 cc turbo engine timing set for car engine manufacturer.
9 speed and 10 speed bicycle chains to go into mass production phase.
The development and construction of newgeneration assembly machines to achievehigher assembly precision.
The development of critical know-how ofinverted tooth chain for the timing purpose in vehicle and motorcycle engines. Inverted tooth chains are also widely used in power transmission applications or on conveyors.
TYC plant in China seeks expansion and relocates to WaFangDian City in LiaoNing Province in year 2011. The new production base covers nearly 56,000 m .
Taiwan plant implements 5S methodology for shop floor control and improved workplace organization. Production strives ahead through the continuous investment in equipments and the endless pursue of higher efficiency. The production capacity grows over 30% as a result.
Looking forward, the company is going all-rounded. TYC now encompasses global production bases, and has a wide product scopes. Beyond manufacturing, TYC is much more. It houses the capability of chain design, the know-how of processes, the ability of test and validation, as well as strong customer support. What TYC offers, along with a piece of TYC chain, is a tailor-made experience and TYCs commitment to full customer satisfaction through quality and services.
2
THAILAND
TAIWAN
CHINA
GLOBAL NETWORKMultiple production bases pro-vide powerful support to your global business
188 Wu Chuan West Road, Section 3,Taichung, TaiwanTEL: 886-4-2389-9848
35 Moo 2 Nongjok, Bangpakong Chachoengso, ThailandTEL: 66-38-577260
No. 6 Xing Gong Street, Wafangdian,Lioning Province 116300, P. R. ChinaTEL: 86-411-8531-4999
Tien Yuen Machinery Manufacturing Company was founded in 1955 in Taiwan, initially as a manufacturer of bicycle and motorcycle chains. In 1958, the company already starts to make export to South East Asia and North America, a bellwether among bicycle component manufacturers in Taiwan.
The company moves to current location for expansion of area, production capacity and product range. The plant takes 45,000 m of land. In the age of labor intensity, TYC once employs more than 1000 workers.
The 70s also marks the decade when TYC expands area of activity and adds industrial chains to its production line. Gradually, the company evolves towards higher automation and starts to develop high speed and continuous production processes.
The growth of the company continues through the establishment of oversea branches in Bangkok, Thailand ( year 1991) and in Dalian, China ( year 1999 ).
In 1993, the company adopts ISO 9000 quality management systems and receives certification in the following year. TYC has since been an ISO certified company.
Year 2000 marks the start of a decade of proliferation and a leap of technical advances for TYC. Several events take place in the years that ensue:
INTELLECTUALLYENGINEERED,EXPERTLY MADE
DesignPower
Wide selections of materials and lubricantsContinuous process design and re-design for the endless quest of the better and the higher efficiencyCapable of failure mode analysis to increase product accountabilityAbility to provide tailor-made products based on the unique quality features of any target applicationsAbility to provide system solutions with chain as a constituent partAbility to develop specialized lab tests for specific customer requirements
Management
Uncompromising insistence on quality and innovationContinuous pursue for the better qualityContinuous endeavor in new productofferings to the marketClosely connected with customers to provide best services
Tool andEquipments
Quality of manufacturing tool determines quality of the product. TYC produces the majority of our own designed die and equipments
Service
Assists customer with chain selection process, targeting not only application requirements but also the optimization of energy efficiencyBrings solutions to customers application issues Helps customer create value by increasing cost performance ratioPossesses know-how & experiences to assist customer designing new products and acquiring new opportunities
Focusing on defect prevention, consistency of process and minimization of variationsProcesses-oriented Quality of supplier is essential to quality assurance to customer. Supplier performance is closely measured and monitored. Supplier training is periodically done Customer satisfaction is the ultimate goal
Quality
6 7
8 9
I
MATERIALPROCESSINGSlittingRollingDrawingPickling Annealing
PARTSPRODUCTION
Curling Cold extrusionCuttingCold headingMachining
HEAT TREATMENT
Through hardeningCase hardeningInduction hardeningTempering
SURFACE TREATMENT
Sand blastingShot peeningGrindingTumbling
ASSEMBLING
Link sortingAssemblingRivetingPre-stress
LUBRICATION & PACKING
Process>>
Consistency Durability Reliability TYC is a ISO 9001 and TS16949 certified company, and is accredited by API Specification Q1.
Pin
Roller link platePin link plate
Pin link plate
Link plate
Roller link plate
Bushing
Roller
The bushings act as chain bearing members along with pins. Bushings have particularly high wear resisting properties, as well as strength and toughness.
The chain link plates act as the main tension mem-bers when load is applied to chain. As such, link plates must have maxi-mum strength and resis-tance to fatigue to with-stand demanding condi-tions of heavy, pulsating and shock loads.
The pins act as chain bearing members to receive shearing and bending force when load is applied to chain. There-fore, pins must have high strength and toughness as well as resistance to wear.
The rollers act as shock absorbing mem-bers to protect other component parts when chain engages with sprocket teeth, thus must have toughness and proper surface hardness.
ROLLER CHAIN
PARTS Pinlink Rollerlink Connectinglink Offsetlink
Riveted
Double cotter
Long solid cotter
Roller link
Spring clip type
Cotter pin type
Two-pitch offset link
One-pitch offset link
A pin link is an outside link consisting of two pin link plates assembled with two pins. There are three types of pin links:
Standard type of pin link.
Pin link with two cotters.
Pin link with one long cotter.
A connecting link is an outside link consist-ing of a pin link plate, two assembled pins and a detach-able pin link plate. There are two types of connecting links:
The detachable pin link plate is retained by a spring clip which engages grooves cut in the ends of the pins.
The detachable pin link plate is retained by twocotters.
An offset link is a link consisting of two offset link plates, a bushing, a roller, a removable pin, and a cotter. The two-pitch offset link consists of a roller link and an offset link, which are connected by a riveted press-fit pin.
A roller link is an inside link consisting of two roller link plates, two bushings and two rollers.
10 11
Double Cotter:
Riveted:
Long Solid Cotter:
Spring Clip Type:
Cotter Pin Type:
CONTENTS
I. ANSI / ISO STANDARD ROLLER CHAINANSI Standard Roller Chain
ISO Standard Roller Chain
SBSR Series
II. ANSI / ISO STANDARD ROLLER CHAIN ATTACHMENTSANSI Standard Attachments
ISO standard Attachments
Non-Standard / Special Attachments
III. HEAVY DUTY ROLLER CHAINANSI Sizes: Heavy Series
Super Series
Super Heavy Series
Super Heavy C-Type
API Series
ISO Sizes: Super Series
Heavy and Super Heavy Series
Non-Standard High Strength Roller Chain
IV. ANSI / ISO DOUBLE-PITCH ROLLER CHAIN ANSI Double-Pitch Roller Chain
ISO Double-Pitch Roller Chain
V. ANSI DOUBLE-PITCH ROLLER CHAIN WITH ATTACHMENTS
VI. LUBE-FREE ROLLER CHAINANSI Sizes: SL / SLB / SLH Series
ISO Sizes
ANSI O-Ring Chain
VII. SPECIAL ROLLER CHAINEnvironmentally Resistant Chain: Stainless Steel and Coated Series
Wear Resistant Series: O-Ring, NOVA and CRP Chain
Side Bow Chain
Hollow Pin Chain
C-Type Roller Chain
Snap-On Top Chain
Rollerless Chain
XIV. DROP FORGED RIVETLESS CHAIN & DRIVE CHAINDrop Forged Rivetless Chain
Drive Chain
XV. WELDED STEEL CHAIN
XVI. COMBINATION CHAIN
XVII. INDUSTRIAL INVERTED TOOTH CHAINInverted Tooth Conveyor Chain
Duplex Silent Chain
XVIII. CHAIN DETACHER
XIX. LUBRICATION GUIDELubrication Method
Lubricant Suggestion
15163032 150
154156159
132138 162
164
168
151152
160161
166164
35364044
596061
464849505152
555657
63
69
75
IX. LEAF CHAINANSI / ISO Leaf Chain
Connector / Anchor / Clevis
Chain for Port Equipment
X. SPECIALTIESPin Oven Chain
Sticker Chain
Sharp Top Chain
Gripper Chain
Accumulation Chain
Top Roller Chain
Double Capacity Chain
Block Chain
Non-Standard Sizes
104
113
105109110
114116118124126128129130131
76
78
8081838486
70
7474
8788
99100102
VIII. AGRICULTURAL CHAINANSI Agricultural Chain and Attachments: CA550 / CA555 / CA557 / CA620 /
CA550HD / C2060H ISO Agricultural Chain and Attachments
Sugar Cane Harvest Chain
Palm Oil Chain
XI. CYCLE CHAIN
XII. MOTORCYCLE CHAIN
145146148
XIII. ENGINEERING CLASS CHAIN81X Series
Other Engineering Class Chain
CERTIFICATES
14 15
STANDARD ANSI ISO
TYC ANSI standard precision roller chain is designed and manufactured to meet or exceed ANSI B29.1 requirements. Com-monly used for power transmission purposes, it can be found in a variety of industrial drive systems.
TYC ISO standard roller chains are manu-factured to conform to ISO, DIN and BS requirements. TYC ISO standard roller chains are available in many sizes and types and are suitable for use on Euro-pean built machines.
There are many chain manufacturers in the world, but TYC is one of the few premier chain manufacturers with top quality products engineered and built for high performance even in the toughest applications.
TYC ANSI / ISO standard roller chains are also available with nickel-plating, zinc-plating, stainless steel, and optimum coating for corrosion resistance. For higher loads, multiple-width strands are available. TYC offers a comprehensive range of high quality standard roller chains for all types of drive systems and operating conditions.
ROLLER CHAIN
ANSI STANDARD ROLLER CHAIN
Type A Type B Type CLubri-cation
11121314151617181920212223242526283032354045
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket
Horsepower Ratings - Single Strand Roller Chain
Pitch x Width
P x Einch
D1
mm mm mm mm mm mm mm mm
Bush
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
LoadApprox.Weight
mm
C
mm
B1
mm
0.76 6.405.805.004.800.763.91 7.11
10.53
4.71 7.91
11.33 2.313.306.35 x 3.18
1/4 x 1/875
130185
-
Chain No.
2525-225-3
50 100 300 365 500 700 900 1200 1500 1800 2100 2500 3000 3500 4000 4500 5000 5500 6000 7000 8000 9000 10000 11000 120000.03 0.04 0.04 0.04 0.05 0.05 0.05 0.05 0.06 0.06 0.06 0.07 0.07 0.07 0.08 0.08 0.08 0.09 0.10 0.11 0.12 0.14
0.06 0.07 0.08 0.08 0.09 0.09 0.10 0.11 0.11 0.12 0.12 0.13 0.13 0.14 0.15 0.15 0.16 0.18 0.19 0.21 0.23 0.26
0.19 0.20 0.22 0.24 0.25 0.27 0.29 0.30 0.32 0.34 0.35 0.37 0.39 0.40 0.42 0.44 0.47 0.50 0.54 0.59 0.67 0.76
0.22 0.24 0.26 0.28 0.30 0.32 0.35 0.37 0.39 0.41 0.43 0.45 0.47 0.49 0.51 0.53 0.57 0.61 0.65 0.71 0.81 0.91
0.30 0.33 0.36 0.38 0.41 0.44 0.47 0.49 0.52 0.55 0.58 0.60 0.63 0.66 0.69 0.71 0.77 0.82 0.88 0.96 1.10 1.24
0.42 0.46 0.49 0.53 0.57 0.61 0.64 0.68 0.72 0.76 0.80 0.83 0.87 0.91 0.95 0.99 1.06 1.14 1.21 1.33 1.52 1.71
0.53 0.58 0.63 0.68 0.72 0.77 0.82 0.87 0.92 0.97 1.01 1.06 1.11 1.16 1.21 1.26 1.35 1.45 1.55 1.69 1.93 2.17
0.70 0.76 0.83 0.89 0.95 1.02 1.08 1.15 1.21 1.27 1.34 1.40 1.46 1.53 1.59 1.65 1.78 1.91 2.04 2.23 2.55 2.86
0.87 0.95 1.03 1.10 1.18 1.26 1.34 1.42 1.50 1.58 1.66 1.73 1.81 1.89 1.97 2.05 2.21 2.37 2.52 2.76 3.15 3.55
1.03 1.13 1.22 1.32 1.41 1.50 1.60 1.69 1.78 1.88 1.97 2.07 2.16 2.25 2.35 2.44 2.63 2.82 3.01 3.29 3.76 4.23
1.20 1.31 1.42 1.52 1.63 1.74 1.85 1.96 2.07 2.18 2.29 2.40 2.51 2.61 2.72 2.83 3.05 3.27 3.49 3.81 4.36 4.90
1.42 1.55 1.67 1.80 1.93 2.06 2.19 2.32 2.45 2.58 2.70 2.83 2.96 3.09 3.22 3.35 3.61 3.86 4.12 4.515.155.79
1.69 1.84 1.99 2.15 2.30 2.42 2.65 2.76 2.91 3.07 3.22 3.37 3.53 3.68 3.84 3.99 4.30 4.46 4.91 5.37 6.146.90
1.69 1.92 2.17 2.42 2.65 2.85 3.02 3.20 3.38 3.56 3.74 3.91 4.09 4.27 4.45 4.62 4.98 5.34 5.69 6.23 7.11 8.00
1.38 1.57 1.77 1.98 2.20 2.42 2.65 2.89 3.13 3.38 3.64 3.90 4.17 4.45 4.73 5.01 5.60 6.07 6.47 7.08 8.09 9.10
1.16 1.32 1.49 1.66 1.84 2.03 2.22 2.42 2.62 2.83 3.05 3.27 3.50 3.73 3.96 4.20 4.70 5.21 5.74 6.56 8.02 9.57
0.99 1.12 1.27 1.42 1.57 1.73 1.90 2.07 2.24 2.42 2.60 2.79 2.98 3.18 3.38 3.59 4.01 4.45 4.90 5.60 6.85 8.17
0.86 0.97 1.10 1.23 1.36 1.50 1.64 1.79 1.94 2.10 2.26 2.42 2.59 2.76 2.93 3.11 3.47 3.85 4.25 4.86 5.93 5.23
0.75 0.86 0.96 1.08 1.20 1.32 1.44 1.57 1.70 1.84 1.98 2.12 2.27 2.42 2.57 2.73 3.05 3.38 3.73 4.26 4.91 1.38
0.60 0.68 0.77 0.86 0.95 1.05 1.14 1.25 1.35 1.46 1.57 1.69 1.80 1.92 2.04 2.17 2.42 2.68 2.96 2.76 0.00 0.00
0.49 0.56 0.63 0.70 0.78 0.86 0.94 1.02 1.11 1.20 1.29 1.38 1.47 1.57 1.67 1.77 1.98 1.98 0.35 0.00
0.41 0.47 0.53 0.59 0.65 0.72 0.79 0.86 0.93 1.00 1.08 1.16 1.24 1.32 1.40 1.49 0.00 0.00 0.00
0.35 0.40 0.45 0.50 0.56 0.61 0.67 0.73 0.79 0.86 0.92 0.99 1.04 0.22 0.00 0.00
0.30 0.34 0.39 0.43 0.48 0.53 0.58 0.63 0.69 0.74 0.00 0.00 0.00 0.00
0.27 0.30 0.34 0.38 0.42 0.47 0.51 0.56 0.00 0.00
470940
1,410
0.130.250.37
PL RL SC-CL 2P-OLPitch
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
ANSI
STAN
DARD
ROLL
ER C
HAIN
25
16 17
ANSI
STAN
DARD
ROLL
ER C
HAIN
35
ANSI STANDARDROLLER CHAIN
Type A Type B Type CLubri-cation
11121314151617181920212223242526283032354045
No. ofTeeth in
SmallSprocket
Horsepower Ratings - Single Strand Roller Chain
0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.20 0.21 0.22 0.23 0.24 0.25 0.26 0.29 0.31 0.33 0.36 0.41 0.46
0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.51 0.55 0.59 0.63 0.69 0.79 0.89
0.42 0.46 0.50 0.54 0.58 0.62 0.65 0.69 0.73 0.77 0.81 0.85 0.89 0.92 0.96 1.00 1.08 1.16 1.23 1.35 1.54 1.73
0.50 0.55 0.60 0.64 0.69 0.73 0.78 0.83 0.87 0.92 0.96 1.01 1.06 1.10 1.15 1.19 1.28 1.38 1.47 1.61 1.84 2.07
1.02 1.11 1.21 1.30 1.39 1.49 1.58 1.67 1.76 1.86 1.95 2.04 2.14 2.23 2.32 2.41 2.60 2.79 2.97 3.25 3.71 4.18
1.41 1.54 1.67 1.80 1.92 2.05 2.18 2.31 2.44 2.56 2.69 2.82 2.95 3.08 3.21 3.33 3.59 3.85 4.10 4.49 5.13 5.77
1.80 1.96 2.12 2.29 2.45 2.61 2.77 2.94 3.10 3.26 3.43 3.59 3.75 3.92 4.08 4.24 4.57 4.90 5.22 5.71 6.53 7.35
2.93 3.20 3.47 3.73 4.00 4.26 4.53 4.80 5.06 5.33 5.60 5.86 6.13 6.40 6.66 6.93 7.46 8.00 8.53 9.33
10.66 11.99
2.37 2.58 2.80 3.01 3.23 3.44 3.66 3.87 4.09 4.30 4.52 4.73 4.95 5.16 5.38 5.59 6.02 6.45 6.88 7.53 8.61 9.68
3.49 3.81 4.13 4.45 4.76 5.08 5.40 5.72 6.03 6.35 6.67 6.99 7.30 7.62 7.94 8.26 8.89 9.53
10.16 11.11 12.70 14.29
4.05 4.42 4.79 5.15 5.52 5.89 6.26 6.63 7.00 7.36 7.73 8.10 8.47 8.84 9.20 9.57
10.31 11.05 11.78 12.89 14.73 16.57
3.86 4.40 4.96 5.55 6.15 6.77 7.40 7.83 8.27 8.71 9.14 9.58
10.01 10.45 10.88 11.32 12.19 13.06 13.93 15.23 17.41 19.59
2.94 3.35 3.77 4.22 4.68 5.15 5.64 6.15 6.67 7.20 7.75 8.31 8.88 9.47
10.07 10.68 11.93 13.23 14.58 16.67 20.37 23.33
2.33 2.66 3.00 3.35 3.71 4.09 4.48 4.88 5.29 5.72 6.15 6.59 7.05 7.51 7.99 8.47 9.47
10.50 11.57 13.23 16.17 15.56
1.91 2.17 2.45 2.74 3.04 3.35 3.67 3.99 4.33 4.68 5.03 5.40 5.77 6.15 6.54 6.93 7.75 8.59 9.47
10.83 11.04 3.11
1.60 1.82 2.05 2.30 2.55 2.81 3.07 3.35 3.63 3.92 4.22 4.52 4.83 5.15 5.48 5.81 6.49 7.20 7.93 8.85 0.34 0.00
1.37 1.56 1.75 1.96 2.17 2.40 2.62 2.86 3.10 3.35 3.60 3.86 4.13 4.40 4.68 4.96 5.55 6.15 5.76 0.34 0.00
1.18 1.35 1.52 1.70 1.88 2.08 2.27 2.48 2.69 2.90 3.12 3.35 3.58 3.81 4.05 4.30 4.81 2.24 0.00 0.00
1.04 1.18 1.33 1.49 1.65 1.82 2.00 2.17 2.36 2.55 2.74 2.94 3.14 3.35 3.56 3.40 0.00 0.00
0.92 1.05 1.18 1.32 1.47 1.62 1.77 1.93 2.09 2.26 2.43 2.61 2.79 2.04 0.12 0.00
0.82 0.94 1.06 1.18 1.31 1.45 1.58 1.73 1.87 2.02 2.17 1.42 0.00 0.00 0.00
0.74 0.85 0.95 1.07 1.18 1.30 1.43 1.56 1.69 1.42 0.00 0.00 0.00
0.67 0.77 0.87 0.97 1.07 1.18 1.30 1.41 0.05 0.00
0.57 0.64 0.73 0.81 0.90 0.44 0.00 0.00 0.00
0.48 0.55 0.62 0.10 0.00 0.00
50 100 200 240 500 700 900 1200 1500 1800 2100 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 9000 10000
TYPE A LUBRICATION - MANUAL OR DRIPTYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHINGTYPE C LUBRICATION - OIL PUMP STREAMING
CP-CLSC-CLPL
Chain No.
3535-235-335-435-5
Pitch x Width
P x E D1
mm mm mm mm mm mm mm mm
Bush
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
LoadApprox.Weight
mm
C
mm
B1
mm
B2inchmm
1.27 10.139.047.807.461.273.605.089.53 x 4.783/8 x 3/16
-5.89 11.21 16.09 21.09 26.24
7.0411.91 17.19 22.29 27.14
7.6912.61 17.89 22.99 28.07
1,120 2,240 3,360 4,480 5,600
220 375 550 725 860
0.32 0.63 0.94 1.25 1.56
RL 2P-OLOL
Revolutions Per Minute - Small Sprocket
18
ANSI
STAN
DARD
ROLL
ER C
HAIN
40
19
ANSI
STAN
DARD
ROLL
ER C
HAIN
41
ANSI STANDARDROLLER CHAIN
Type A Type B Type CLubri-cation
11121314151617181920212223242526283032354045
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 10 25 50 100 180 200 300 500 700 900 1000 1200 1400 1600 1800 2100 2500 3000 3500 4000 5000 6000 7000 8000 90000.03 0.03 0.04 0.04 0.04 0.05 0.05 0.05 0.05 0.06 0.06 0.06 0.07 0.07 0.07 0.07 0.08 0.08 0.09 0.10 0.11 0.13
0.07 0.08 0.09 0.10 0.10 0.11 0.12 0.12 0.13 0.14 0.14 0.15 0.16 0.16 0.17 0.18 0.19 0.20 0.22 0.24 0.27 0.31
0.15 0.16 0.17 0.19 0.20 0.21 0.23 0.24 0.25 0.27 0.28 0.29 0.30 0.32 0.33 0.34 0.37 0.40 0.42 0.46 0.53 0.60
0.28 0.31 0.34 0.36 0.39 0.41 0.44 0.46 0.49 0.52 0.54 0.57 0.59 0.62 0.64 0.67 0.72 0.77 0.82 0.90 1.03 1.16
0.81 0.89 0.96 1.04 1.11 1.18 1.26 1.33 1.41 1.48 1.55 1.63 1.70 1.78 1.85 1.92 2.07 2.22 2.37 2.59 2.96 3.33
1.33 1.45 1.57 1.69 1.81 1.93 2.05 2.18 2.30 2.42 2.54 2.66 2.78 2.90 3.02 3.14 3.38 3.63 3.87 4.23 4.83 5.44
1.84 2.00 2.17 2.34 2.50 2.67 2.84 3.00 3.17 3.34 3.51 3.67 3.84 4.01 4.17 4.34 4.67 5.01 5.34 5.84 6.68 7.51
2.34 2.55 2.76 2.97 3.19 3.40 3.61 3.82 4.04 4.25 4.46 4.67 4.89 5.10 5.31 5.52 5.95 6.37 6.80 7.44 8.50 9.56
0.50 0.54 0.59 0.63 0.68 0.73 0.77 0.82 0.86 0.91 0.95 1.00 1.04 1.09 1.13 1.18 1.27 1.36 1.45 1.59 1.81 2.04
0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 1.25 1.30 1.40 1.50 1.60 1.76 2.01 2.26
1.36 1.55 1.75 1.95 2.17 2.39 2.61 2.85 3.09 3.33 3.59 3.85 4.11 4.38 4.66 4.94 5.52 6.13 6.75 7.72 9.43
11.25
1.11 1.27 1.43 1.60 1.77 1.95 2.14 2.33 2.53 2.73 2.94 3.15 3.37 3.59 3.81 4.05 4.52 5.01 5.52 6.32 7.72 9.21
0.93 1.06 1.20 1.34 1.49 1.64 1.79 1.95 2.12 2.29 2.46 2.64 2.82 3.01 3.20 3.39 3.79 4.20 4.63 5.29 6.47 7.72
0.74 0.84 0.95 1.06 1.18 1.30 1.42 1.55 1.68 1.81 1.95 2.09 2.24 2.39 2.54 2.69 3.01 3.33 3.67 4.20 5.13 6.13
2.25 2.57 2.89 3.23 3.53 3.76 4.00 4.23 4.47 4.70 4.94 5.17 5.41 5.64 5.88 6.11 6.58 7.05 7.52 8.23 9.40
10.58
1.71 1.95 2.20 2.46 2.73 3.01 3.29 3.59 3.89 4.20 4.52 4.85 5.18 5.52 5.87 6.23 6.96 7.72 8.50 9.80
11.20 12.60
0.57 0.65 0.73 0.82 0.91 1.00 1.10 1.19 1.29 1.40 1.50 1.61 1.72 1.84 1.95 2.07 2.31 2.57 2.83 3.23 3.95 4.72
0.43 0.49 0.56 0.62 0.69 0.76 0.83 0.91 0.98 1.06 1.14 1.23 1.31 1.40 1.49 1.58 1.76 1.95 2.15 2.46 3.01 3.59
0.34 0.39 0.44 0.49 0.55 0.60 0.66 0.72 0.78 0.84 0.91 0.97 1.04 1.11 1.18 1.25 1.40 1.55 1.71 1.95 0.00 0.00
0.28 0.32 0.36 0.40 0.45 0.49 0.54 0.59 0.64 0.69 0.74 0.80 0.85 0.91 0.96 1.02 1.14 1.27 1.40 0.00
0.12 0.14 0.16 0.17 0.19 0.00 0.00 0.00 0.00
0.10 0.11 0.00 0.00 0.00
0.00 0.00
0.20 0.23 0.26 0.29 0.32 0.35 0.39 0.42 0.46 0.49 0.53 0.57 0.61 0.65 0.00 0.00 0.00 0.00 0.00
0.15 0.17 0.20 0.22 0.24 0.27 0.29 0.32 0.09 0.00 0.00 0.00 0.00 0.00
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
PL RL SC-CL CP-CL OL 2P-OL
Chain No.
Pitch x Width
P x Einch
D1
mm mm mm mm mm mm
Roller Pin
T1 T2 H F1 F2
Link
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
Max.Working
LoadApprox.Weight
mm
C
mm
B1
mm
0.411,3006.69 8.49
mm
B2
8.49
mm
D2
3.60 1.27 1.27 9.06 8.50 9.9041 2407.7712.70 x 6.351/2 x 1/4
Horsepower Ratings - Single Strand Roller Chain
ANSI STANDARD ROLLER CHAIN
Chain No.
Pitch x Width Roller Pin Link Avg. Ulti.TensileStrength
TraversePitch
Max.Working
LoadApprox.Weight
P x E D1 D2 T1 T2 H F1 F2 KC B1 B2
mm mm mm mm mm mm mm mm kg / mkgf kgfmm mm mminchmm
1.52
0.62 1.22 1.82 2.43 3.04 3.65
14.3812.0610.4111.171.5212.70 x 7.92 3.987.921/2 x 5/16
4040-240-340-440-540-6
- 370630925
1,2201,4451,700
TYPE A LUBRICATION - MANUAL OR DRIPTYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
Type A Type B Type CLubri-cation
11121314151617181920212223242526283032354045
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 10 25 50 100 180 200 300 500 700 900 1000 1200 1400 1600 1800 2100 2500 3000 3500 4000 5000 6000 7000 8000 90000.14 0.15 0.16 0.17 0.19 0.20 0.21 0.22 0.24 0.25 0.26 0.27 0.28 0.30 0.31 0.32 0.35 0.37 0.40 0.43 0.50 0.56
0.27 0.29 0.31 0.34 0.36 0.39 0.41 0.43 0.46 0.48 0.51 0.53 0.55 0.58 0.60 0.63 0.67 0.72 0.77 0.84 0.96 1.08
0.52 0.56 0.61 0.66 0.70 0.75 0.80 0.84 0.89 0.94 0.98 1.03 1.08 1.12 1.17 1.22 1.31 1.41 1.50 1.64 1.87 2.11
0.91 0.99 1.07 1.15 1.24 1.32 1.40 1.48 1.57 1.65 1.73 1.81 1.90 1.98 2.06 2.14 2.31 2.47 2.64 2.88 3.30 3.71
1.00 1.09 1.19 1.28 1.37 1.46 1.55 1.64 1.73 1.82 1.91 2.01 2.10 2.19 2.28 2.37 2.55 2.74 2.92 3.19 3.65 4.10
1.48 1.61 1.75 1.88 2.02 2.15 2.29 2.42 2.56 2.69 2.83 2.96 3.10 3.23 3.36 3.50 3.77 4.04 4.31 4.71 5.38 6.06
2.42 2.64 2.86 3.08 3.30 3.52 3.74 3.96 4.18 4.39 4.61 4.83 5.05 5.27 5.49 5.71 6.15 6.59 7.03 7.69 8.79 9.89
3.34 3.64 3.95 4.25 4.55 4.86 5.16 5.46 5.77 6.07 6.37 6.68 6.98 7.28 7.59 7.89 8.50 9.11 9.71
10.62 12.14 13.66
4.25 4.64 5.02 5.41 5.80 6.18 6.57 6.95 7.34 7.73 8.11 8.50 8.89 9.27 9.66 10.04 10.82 11.59 12.36 13.52 15.45 17.39
4.70 5.13 5.56 5.98 6.41 6.84 7.27 7.69 8.12 8.55 8.98 9.40 9.83
10.26 10.69 11.11 11.97 12.82 13.68 14.96 17.10 19.24
5.60 6.11 6.62 7.13 7.64 8.15 8.66 9.17 9.68
10.18 10.69 11.20 11.71 12.22 12.73 13.24 14.26 15.28 16.30 17.82 20.37 22.92
6.49 7.09 7.68 8.27 8.86 9.45
10.04 10.63 11.22 11.81 12.40 12.99 13.58 14.17 14.76 15.35 16.53 17.71 18.89 20.67 23.62 26.57
5.57 6.34 7.15 7.99 8.86 9.76
10.69 11.65 12.64 13.42 14.10 14.77 15.44 16.11 16.78 17.45 18.79 20.14 21.48 23.49 26.85 30.20
4.66 5.31 5.99 6.70 7.43 8.18 8.96 9.76
10.59 11.44 12.30 13.19 14.10 15.03 15.98 16.95 18.94 21.01 23.14 26.30 30.06 33.82
3.70 4.22 4.76 5.31 5.89 6.49 7.11 7.75 8.40 9.07 9.76
10.47 11.19 11.93 12.68 13.45 15.03 16.67 18.37 21.01 25.67 30.63
2.85 3.25 3.66 4.09 4.54 5.00 5.48 5.97 6.47 6.99 7.52 8.06 8.62 9.18 9.76
10.36 11.57 12.84 14.14 16.17 19.76 23.58
2.17 2.47 2.79 3.11 3.45 3.80 4.17 4.54 4.92 5.31 5.72 6.13 6.55 6.99 7.43 7.88 8.80 9.76
10.76 12.30 15.03
5.53
1.72 1.96 2.21 2.47 2.74 3.02 3.31 3.60 3.91 4.22 4.54 4.87 5.20 5.54 5.89 6.25 6.99 7.75 8.54 9.76 0.00 0.00
1.41 1.60 1.81 2.02 2.24 2.47 2.71 2.95 3.20 3.45 3.71 3.98 4.26 4.54 4.82 5.12 5.72 6.34 1.41 0.00
1.01 1.15 1.29 1.45 1.60 1.77 1.94 2.11 2.29 2.47 2.66 2.85 3.05 0.87 0.00 0.00 0.00 0.00 0.00
0.77 0.87 0.98 1.10 1.22 1.34 1.47 1.60 0.09 0.00 0.00 0.00 0.00 0.00
0.61 0.69 0.78 0.87 0.97 0.00 0.00 0.00 0.00
0.50 0.57 0.00 0.00 0.00
0.00 0.00
Horsepower Ratings - Single Strand Roller Chain
PL RL SC-CL OL 2P-OLCP-CL
8.22
15.45
22.60
29.60
36.80
44.15
10.32
17.53
24.76
32.24
39.42
46.35
10.32
17.53
24.76
32.20
39.40
46.55
1,9003,8005,7007,8009,800
11,700
0.06 0.06 0.07 0.07 0.08 0.08 0.09 0.09 0.10 0.10 0.11 0.11 0.12 0.12 0.13 0.13 0.14 0.15 0.16 0.18 0.21 0.23
60
50
20
ANSI
STAN
DARD
ROLL
ER C
HAIN
50
21
ANSI
STAN
DARD
ROLL
ER C
HAIN
60
ANSI STANDARDROLLER CHAIN
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
Horsepower Ratings - Single Strand Roller Chain
Type A Type B Type CLubri-cation
11121314151617181920212223242526283032354045
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 10 25 50 100 120 200 300 400 500 600 800 1000 1200 1400 1600 1800 2000 2500 3000 3500 4000 4500 5000 5500 6000
Chain No.
Pitch x Width
P x E D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch Max.Working
LoadApprox.Weight
mm
C
mm
B1
mm
B2inchmm
1.452.874.285.707.118.53
11.35
4,2008,400
12,60017,20021,50025,80034,400
12.7224.1035.5546.9558.0269.7592.50
15.2726.7338.1649.5461.24
-
15.2726.8038.2549.6561.2472.3095.10
2.39 22.7818.0915.6417.752.3919.05 x 12.70 5.9611.913/4 x 1/2
6060-260-360-460-560-660-8
- 9501,6202,3803,1403,7004,3705,510
0.19 0.21 0.22 0.24 0.26 0.27 0.29 0.31 0.33 0.34 0.36 0.38 0.40 0.41 0.43 0.45 0.48 0.52 0.55 0.60 0.69 0.77
0.46 0.50 0.54 0.58 0.62 0.66 0.70 0.75 0.79 0.83 0.87 0.91 0.95 0.99 1.04 1.08 1.16 1.24 1.33 1.45 1.66 1.86
0.89 0.97 1.05 1.13 1.21 1.29 1.37 1.45 1.53 1.61 1.69 1.77 1.85 1.93 2.01 2.09 2.26 2.42 2.58 2.82 3.22 3.63
1.72 1.88 2.04 2.19 2.35 2.51 2.66 2.82 2.98 3.13 3.29 3.45 3.61 3.76 3.92 4.08 4.39 4.70 5.02 5.49 6.27 7.05
2.05 2.24 2.43 2.61 2.80 2.99 3.17 3.36 3.55 3.73 3.92 4.11 4.29 4.48 4.67 4.85 5.23 5.60 5.98 6.54 7.47 8.40
3.35 3.66 3.96 4.27 4.57 4.88 5.18 5.49 5.79 6.10 6.40 6.71 7.01 7.32 7.62 7.93 8.54 9.15 9.76
10.67 12.20 13.72
4.95 5.40 5.85 6.30 6.75 7.20 7.65 8.10 8.55 9.00 9.45 9.90
10.35 10.80 11.25 11.70 12.60 13.50 14.40 15.75 18.00 20.25
6.52 7.12 7.71 8.30 8.90 9.49
10.08 10.68 11.27 11.86 12.46 13.05 13.64 14.24 14.83 15.42 16.61 17.79 18.98 20.76 23.73 26.69
8.08 8.82 9.55
10.29 11.02 11.76 12.49 13.23 13.96 14.70 15.43 16.17 16.90 17.64 18.37 19.11 20.58 22.05 23.52 25.72 29.39 33.07
9.63 10.51 11.38 12.26 13.13 14.01 14.88 15.76 16.63 17.51 18.38 19.26 20.13 21.01 21.89 22.76 24.51 26.26 28.01 30.64 35.02 39.39
12.69 13.85 15.00 16.15 17.31 18.46 19.62 20.77 21.92 23.08 24.23 25.39 26.54 27.69 28.85 30.00 32.31 34.62 36.92 40.39 46.16 51.92
15.58 17.15 18.58 20.01 21.44 22.87 24.30 25.73 27.16 28.59 30.02 31.45 32.88 34.31 35.74 37.17 40.03 42.89 45.75 50.03 57.18 64.33
11.85 13.51 15.23 17.02 18.87 20.79 22.77 24.81 26.91 29.06 31.26 33.52 35.84 38.20 40.61 43.07 47.68 51.09 54.50 59.60 68.12 76.63
9.41 10.72 12.08 13.51 14.98 16.50 18.07 19.69 21.35 23.06 24.81 26.60 28.44 30.31 32.23 34.18 38.20 42.36 46.67 53.38 65.22 77.83
7.70 8.77 9.89
11.05 12.26 13.51 14.79 16.11 17.48 18.87 20.31 21.77 23.28 24.81 26.38 27.98 31.26 34.67 38.20 43.69 53.38 63.70
6.45 7.35 8.29 9.26
10.27 11.32 12.40 13.51 14.65 15.82 17.02 18.25 19.51 20.79 22.11 23.44 26.20 29.06 32.01 36.62 44.74 53.38
5.51 6.28 7.08 7.91 8.77 9.66
10.58 11.53 12.50 13.51 14.53 15.58 16.66 17.75 18.87 20.02 22.37 24.81 27.33 31.26 38.20 12.45
3.94 4.49 5.06 5.66 6.28 6.91 7.57 8.25 8.95 9.66
10.40 11.15 11.92 12.70 13.51 14.32 16.01 17.75 19.56 1.35 0.00 0.00
3.00 3.42 3.85 4.31 4.77 5.26 5.76 6.28 6.81 7.35 7.91 8.48 9.07 9.66 10.27 10.90 0.00 0.00 0.00 0.00
2.38 2.71 3.06 3.42 3.79 4.17 4.57 4.98 5.40 5.83 6.28 0.00 0.00 0.00 0.00 0.00
1.95 2.22 2.50 2.80 3.10 3.42 3.74 4.08 0.20 0.00 0.00
1.63 1.86 2.10 2.34 2.60 1.78 0.00 0.00 0.00
1.39 1.59 1.79 0.41 0.00 0.00
1.21 1.38 0.00 0.00
0.00 0.00
Chains also available in cottered style
PL RL SC-CL OL 2P-OLCP-CL
Horsepower Ratings - Single Strand Roller Chain
Type A Type B Type CLubri-cation
11121314151617181920212223242526283032354045
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 10 25 50 100 140 200 300 500 700 900 1200 1500 1800 2100 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 75000.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.20 0.21 0.22 0.23 0.24 0.25 0.26 0.28 0.30 0.32 0.35 0.40 0.45
0.27 0.29 0.31 0.34 0.36 0.39 0.41 0.43 0.46 0.48 0.51 0.53 0.55 0.58 0.60 0.63 0.67 0.72 0.77 0.84 0.96 1.08
0.52 0.56 0.61 0.66 0.70 0.75 0.80 0.84 0.89 0.94 0.98 1.03 1.08 1.13 1.17 1.22 1.31 1.41 1.50 1.64 1.88 2.11
1.00 1.09 1.19 1.28 1.37 1.46 1.55 1.64 1.73 1.82 1.92 2.01 2.10 2.19 2.28 2.37 2.55 2.74 2.92 3.19 3.65 4.10
1.39 1.51 1.64 1.76 1.89 2.02 2.14 2.27 2.39 2.52 2.65 2.77 2.90 3.02 3.15 3.28 3.53 3.78 4.03 4.41 5.04 5.67
1.95 2.13 2.31 2.48 2.66 2.84 3.02 3.19 3.37 3.55 3.73 3.90 4.08 4.26 4.44 4.61 4.97 5.32 5.68 6.21 7.10 7.98
2.88 3.14 3.40 3.67 3.93 4.19 4.45 4.71 4.98 5.24 5.50 5.76 6.02 6.28 6.55 6.81 7.33 7.86 8.38 9.16
10.47 11.78
4.70 5.13 5.56 5.99 6.41 6.84 7.27 7.70 8.12 8.55 8.98 9.41 9.83
10.26 10.69 11.12 11.97 12.83 13.68 14.97 17.10 19.24
6.50 7.09 7.68 8.27 8.86 9.45
10.04 10.63 11.22 11.81 12.40 12.99 13.58 14.18 14.77 15.36 16.54 17.72 18.90 20.67 23.63 26.58
8.27 9.02 9.77
10.53 11.28 12.03 12.78 13.53 14.28 15.04 15.79 16.54 17.29 18.04 18.79 19.55 21.05 22.55 24.06 26.31 30.07 33.83
10.24 11.67 12.88 13.87 14.86 15.85 16.85 17.84 18.83 19.82 20.81 21.80 22.79 23.78 24.77 25.76 27.75 29.73 31.71 34.68 39.64 44.59
7.33 8.35 9.42
10.52 11.67 12.86 14.08 15.34 16.64 17.97 19.34 20.73 22.16 23.62 25.11 26.64 29.77 33.01 36.37 41.60 49.11 55.24
5.58 6.35 7.16 8.01 8.88 9.78
10.71 11.67 12.66 13.67 14.71 15.77 16.86 17.97 19.11 20.26 22.65 25.11 27.67 31.65 38.67 46.14
4.42 5.04 5.69 6.35 7.05 7.76 8.50 9.26
10.05 10.85 11.67 12.52 13.38 14.26 15.16 16.08 17.97 19.93 21.96 25.11 30.68 36.61
3.41 3.88 4.38 4.89 5.42 5.98 6.55 7.13 7.73 8.35 8.99 9.64
10.30 10.98 11.67 12.38 13.84 15.34 16.90 19.34 23.62 8.64
2.59 2.95 3.33 3.72 4.13 4.55 4.98 5.42 5.88 6.35 6.84 7.33 7.84 8.35 8.88 9.42
10.52 11.67 12.86 0.94 0.00 0.00
2.06 2.34 2.64 2.95 3.27 3.61 3.95 4.30 4.67 5.04 5.42 5.82 6.22 6.63 7.05 7.47 4.74 0.00 0.00 0.00
1.68 1.92 2.16 2.42 2.68 2.95 3.23 3.52 3.82 4.13 4.44 4.76 5.09 1.36 0.00 0.00 0.00
1.41 1.61 1.81 2.03 2.25 2.47 2.71 2.95 3.20 3.46 0.00 0.00 0.00 0.00
1.20 1.37 1.55 1.73 1.92 2.11 2.31 0.05 0.00 0.00
1.04 1.19 1.34 1.50 1.66 0.00 0.00 0.00
0.92 1.04 1.18 0.28 0.00
0.81 0.93 0.00 0.00
0.73 0.00
0.00
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
ANSI STANDARD ROLLER CHAIN
PL RL SC-CL OL 2P-OLCP-CL
Chain No.
Pitch x Width
P x E D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
LoadApprox.Weight
mm
C
mm
B1
mm
B2inchmm
2.03 18.1115.0813.0113.842.0315.88 x 9.53 5.0910.165/8 x 3/8
5050-250-350-450-550-650-8
-10.1519.1828.2837.6846.7355.5573.53
12.4021.5430.6539.3648.4257.7175.93
12.4021.5831.0339.7848.8457.7175.93
3,1006,2009,300
12,90016,10019,40025,800
1.01 2.00 2.98 3.98 5.02 6.03 8.02
635 1,080 1,590 2,100 2,480 2,920 3,680
Chains also available in cottered style
80
100
22
ANSI
STAN
DARD
ROLL
ER C
HAIN
80
23
ANSI
STAN
DARD
ROLL
ER C
HAIN
100
ANSI STANDARDROLLER CHAIN
Chain No.
Pitch x Width
P x Einch
D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
Load
Approx.Weight
mmC
mmB1
mmB2
mm2.555.057.54
10.0612.2115.19
1,500 2,550 3,750 4,950 5,850 6,900
8,00016,00024,00032,00040,00048,000
16.5031.1045.7060.7575.1089.77
18.5033.2047.8061.9577.2091.77
20.4035.2049.9064.1579.3093.12
3.18 29.2924.1320.8222.603.1825.4 x 15.88 7.9415.881 x 5/8
8080-280-380-480-580-6
-
Horsepower Ratings - Single Strand Roller Chain
Type A Type B Type CLubri-cation
11121314151617181920212223242526283032354045
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 10 25 50 75 88 100 200 300 400 500 600 700 800 900 1000 1200 1400 1600 1800 2000 2500 3000 3500 4000 4500
PL RL SC-CL OL 2P-OLCP-CL
0.44 0.48 0.52 0.56 0.60 0.64 0.68 0.72 0.76 0.80 0.84 0.88 0.92 0.96 1.00 1.04 1.12 1.20 1.28 1.40 1.61 1.81
1.06 1.16 1.26 1.35 1.45 1.55 1.64 1.74 1.84 1.93 2.03 2.13 2.22 2.32 2.42 2.51 2.71 2.90 3.09 3.38 3.87 4.35
2.07 2.26 2.45 2.63 2.82 3.01 3.20 3.39 3.57 3.76 3.95 4.14 4.33 4.52 4.70 4.89 5.27 5.64 6.02 6.58 7.53 8.47
3.05 3.33 3.61 3.89 4.16 4.44 4.72 5.00 5.28 5.55 5.83 6.11 6.39 6.66 6.94 7.22 7.77 8.33 8.89 9.72
11.11 12.49
3.56 3.88 4.21 4.53 4.86 5.18 5.50 5.83 6.15 6.47 6.80 7.12 7.45 7.77 8.09 8.42 9.06 9.71
10.36 11.33 12.95 14.57
4.03 4.39 4.76 5.12 5.49 5.86 6.22 6.59 6.95 7.32 7.69 8.05 8.42 8.78 9.15 9.52
10.25 10.98 11.71 12.81 14.64 16.47
7.83 8.54 9.26 9.97
10.68 11.39 12.10 12.81 13.53 14.24 14.95 15.66 16.37 17.09 17.80 18.51 19.93 21.36 22.78 24.92 28.48 32.04
11.56 12.61 13.66 14.71 15.76 16.81 17.86 18.91 19.96 21.01 22.07 23.12 24.17 25.22 26.27 27.32 29.42 31.52 33.62 36.78 42.30 47.28
15.23 16.62 18.00 19.39 20.77 22.16 23.54 24.93 26.31 27.70 29.08 30.47 31.85 33.24 34.62 36.01 38.78 41.55 44.32 48.47 55.40 62.32
18.87 20.59 22.31 24.02 25.74 27.45 29.17 30.88 32.60 34.32 36.03 37.75 39.46 41.18 42.89 44.61 48.04 51.47 54.91 60.05 68.63 77.21
22.48 24.53 26.57 28.62 30.66 32.70 34.75 36.79 38.84 40.88 42.92 44.97 47.01 49.06 51.10 53.14 57.23 61.32 65.41 71.54 81.76 91.98
26.07 28.44 30.81 33.18 35.55 37.92 40.29 42.66 45.03 47.40 49.77 52.14 54.51 56.88 59.25 61.62 66.36 71.10 75.84 82.95 94.80
106.65
27.41 31.23 35.02 37.72 40.41 43.11 45.80 48.49 51.19 53.88 56.58 59.27 61.97 64.66 67.35 70.05 75.44 80.82 86.21 94.29
107.77 121.24
19.61 22.35 25.20 28.16 31.23 34.41 37.68 41.05 44.52 48.08 51.73 55.47 59.30 63.21 67.20 71.27 79.65 88.33 97.31
111.31 133.51 150.20
14.92 17.00 19.17 21.42 23.76 26.17 28.66 31.23 33.87 36.58 39.36 42.20 45.11 48.08 51.12 54.22 60.59 67.20 74.03 84.68
103.46 123.45
11.84 13.49 15.21 17.00 18.85 20.77 22.75 24.78 26.88 29.03 31.23 33.49 35.80 38.16 40.57 43.02 48.08 53.33 58.75 67.20 82.10 72.28
9.69 11.04 12.45 13.91 15.43 17.00 18.62 20.29 22.00 23.76 25.56 27.41 29.30 31.23 33.20 35.22 39.36 43.65 48.08 55.00 40.16 0.00
8.12 9.25
10.43 11.66 12.93 14.25 15.60 17.00 18.44 19.91 21.42 22.97 24.55 26.17 27.83 29.51 32.98 36.58 40.30 28.15 0.00
6.93 7.90 8.91 9.96
11.04 12.16 13.32 14.51 15.74 17.00 18.29 19.61 20.97 22.35 23.76 25.20 28.16 31.23 5.65 0.00
4.96 5.65 6.37 7.12 7.90 8.70 9.53
10.39 11.26 12.16 13.09 14.03 15.00 15.99 8.16 0.00 0.00 0.00 0.00
3.77 4.30 4.85 5.42 6.01 6.62 7.25 7.90 0.36 0.00 0.00 0.00 0.00 0.00 0.00
3.00 3.41 3.85 4.30 4.77 5.25 0.00 0.00 0.00
2.45 2.79 3.15 3.52 0.00 0.00
0.00 0.00 0.00 0.00
Chains also available in cottered style
TYPE A LUBRICATION - MANUAL OR DRIPTYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
22.97 26.17 29.51 32.98 36.58 40.30 44.13 48.08 52.15 56.32 60.59 64.97 69.38 72.40 75.42 78.43 84.47 90.50 96.53
105.58 120.67 135.75
ANSI STANDARDROLLER CHAIN
Chains also available in cottered style
Chain No.
Pitch x Width
P x Einch
D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
LoadApprox.Weight
mm
C
mm
B2
mm3.95
7.8611.7515.6519.5523.45
2,300 3,910 5,750 7,590 8,970
10,580
11,500 23,000 34,500 53,300 66,600 80,000
19.84 38.14 56.49 73.89 91.70
109.58
24.14 42.04 59.39 77.79 95.27
112.88
3.96 35.7630.1626.0327.453.9631.75 x 19.05 9.5419.051-1/4 x 3/4
100100-2100-3100-4100-5100-6
-
PL RL CP-CL OL 2P-OL
Horsepower Ratings - Single Strand Roller Chain
Lubri-cation
11121314151617181920212223242526283032354045
No. ofTeeth in
SmallSprocket 10 25 50 71 100 150 200 300 400 500 600 700 800 900 1000 1100 1200 1400 1600 1800 2000 2500 3000 3500 4000
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
0.85 0.92 1.00 1.08 1.15 1.23 1.31 1.38 1.46 1.54 1.61 1.69 1.77 1.84 1.92 2.00 2.15 2.31 2.46 2.69 3.07 3.46
2.04 2.22 2.41 2.59 2.78 2.96 3.15 3.33 3.52 3.70 3.89 4.08 4.26 4.45 4.63 4.82 5.19 5.56 5.93 6.48 7.41 8.34
3.96 4.32 4.68 5.04 5.41 5.77 6.13 6.49 5.85 7.21 7.57 7.93 8.29 8.65 9.01 9.37
10.09 10.81 11.53 12.61 14.41 16.22
5.55 6.05 6.56 7.06 7.57 8.07 8.58 9.08 9.59
10.09 10.60 11.10 11.60 12.11 12.61 13.12 14.13 15.14 16.15 17.66 20.18 22.71
7.71 8.41 9.11 9.81
10.51 11.22 11.92 12.62 13.32 14.02 14.72 15.42 16.12 16.82 17.52 18.23 19.63 21.03 22.43 24.53 28.04 31.54
11.38 12.41 13.45 14.48 15.52 16.55 17.59 18.62 19.66 20.69 21.73 22.76 23.79 24.83 25.86 26.90 28.97 31.04 33.11 36.21 41.38 46.55
15.00 16.36 17.73 19.09 20.45 21.82 23.18 24.55 25.91 27.27 28.64 30.00 31.36 32.73 34.09 35.45 38.18 40.91 43.64 47.73 54.54 61.36
22.14 24.15 26.16 28.18 30.19 32.20 34.21 36.23 38.24 40.25 42.26 44.28 46.29 48.30 50.31 52.33 56.35 60.38 64.40 70.44 80.50 90.56
29.18 31.83 34.48 37.14 39.79 42.44 45.10 47.75 50.40 53.05 55.71 58.36 61.01 63.66 66.32 68.97 74.27 79.58 84.88 92.84
106.11 119.37
36.15 39.44 42.72 46.01 49.30 52.58 55.87 59.15 62.44 65.73 69.01 72.30 75.59 78.87 82.16 85.45 92.02 98.59
105.16 115.02 131.45 147.89
43.06 46.98 50.89 54.81 58.72 62.64 66.55 70.47 74.38 78.30 82.21 86.13 90.04 93.96 97.87
101.79 109.62 117.45 125.28 137.02 156.60 176.17
40.03 45.61 51.43 57.48 63.75 70.23 76.91 81.71 86.25 90.79 95.33 99.87
104.41 108.95 113.48 118.02 127.10 136.18 145.26 158.88 181.58 204.27
32.77 37.33 42.10 47.05 52.18 57.48 62.95 68.59 74.38 80.33 86.43 92.68 99.07
105.60 112.27 119.07 133.07 147.58 162.58 180.61 206.41 232.21
27.46 31.29 35.28 39.43 43.73 48.17 52.76 57.48 62.34 67.32 72.43 77.67 83.02 88.50 94.09 99.79
111.52 123.68 136.25 155.85 190.42 227.21
23.45 26.71 30.12 33.66 37.33 41.13 45.05 49.08 53.22 57.48 61.85 66.31 70.89 75.56 80.33 85.20 95.22
105.60 116.33 133.07 162.58 194.00
20.32 23.16 26.11 29.18 32.36 35.65 39.04 42.54 46.13 49.82 53.61 57.48 61.44 65.49 69.63 73.85 82.53 91.53
100.84 115.34 140.92 168.15
17.84 20.32 22.92 25.61 28.40 31.29 34.27 37.33 40.49 43.73 47.05 50.45 53.93 57.48 61.11 64.81 72.43 80.33 88.50
101.23 122.68 34.58
14.15 16.13 18.18 20.32 22.54 24.83 27.19 29.63 32.13 34.70 37.33 40.03 42.79 45.61 48.49 51.43 57.48 63.75 70.23 69.02 0.00 0.00
11.58 13.20 14.88 16.63 18.45 20.32 22.26 24.25 26.30 28.40 30.56 32.77 35.03 37.33 39.69 42.10 47.05 49.40 8.82 0.00
9.71 11.06 12.47 13.94 15.46 17.03 18.65 20.32 22.04 23.80 25.61 27.46 29.35 31.29 33.26 35.28 0.00 0.00 0.00
8.29 9.45
10.65 11.90 13.20 14.54 15.93 17.35 18.82 20.32 21.87 23.45 25.06 5.43 0.00 0.00
5.93 6.76 7.62 8.52 9.45
10.41 11.40 0.18 0.00 0.00 0.00 0.00 0.00 0.00
4.51 5.14 5.80 1.13 0.00 0.00 0.00 0.00
3.58 0.00 0.00 0.00
0.00
Type A Type B Type C
Revolutions Per Minute - Small Sprocket
140
24
ANSI
STAN
DARD
ROLL
ER C
HAIN
120
25
ANSI
STAN
DARD
ROLL
ER C
HAIN
140
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
kg / m
Approx.Weight
5.6411.2016.7322.2827.8233.4739.02
Horsepower Ratings - Single Strand Roller Chain
Type A Type B Type CLubri-cation
11121314151617181920212223242526283032354045
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 10 25 50 60 75 100 150 200 300 400 500 600 700 800 900 1000 1200 1400 1600 1800 2000 2200 2400 2700 30000.000.00
1.431.561.69 1.821.95 2.082.21 2.342.47 2.60 2.732.862.993.113.24 3.37 3.633.89 4.154.54 5.19 5.84
3.443.75 4.074.384.69 5.00 5.32 5.635.946.26 6.576.887.197.51 7.82 8.138.769.38 10.01 10.9512.51 14.08
6.697.307.918.529.139.7410.3410.9511.5612.1712.7813.3914.0014.6015.2115.8217.0418.2519.4721.3024.3427.38
7.978.709.4210.1510.8711.6012.3213.0513.7714.5015.2215.9516.6717.4018.1218.8520.3021.7523.2025.3728.9932.62
9.8810.7811.6712.57 13.47 14.3715.27 16.1617.0617.9618.86 19.7620.65 21.5522.45 23.3525.15 26.94 28.7431.4335.9240.41
13.02 14.20 15.39 16.57 17.7618.9420.1221.3122.4923.67 24.86 26.04 27.22 28.4129.5930.78 33.1435.5137.88 41.4347.35 53.27
19.22 20.96 22.71 24.46 26.20 27.95 29.70 31.45 33.19 34.94 36.69 38.43 40.18 41.93 43.67 45.42 48.92 52.41 55.90 61.14 69.88 78.61
25.33 27.6329.93 32.2434.54 36.84 39.1441.45 43.7546.05 48.3650.6652.9655.26 57.5759.8764.4769.0873.68 80.5992.11 103.62
37.38 40.78 44.18 47.5850.98 54.3757.77 61.17 64.57 67.97 71.37 74.7678.16 81.56 84.9688.3695.15 101.95 108.75 118.94135.94 152.93
49.2753.7558.23 62.7167.19 71.6776.15 80.6385.11 89.59 94.0798.55 103.02 107.50 111.98116.46125.42134.38143.34 156.78179.17201.57
61.04 66.5972.14 77.6983.2488.79 94.3499.89105.44 110.99 116.54122.09 127.64133.19138.74 144.29 155.38166.48177.58194.23221.98 249.72
58.37 66.51 74.9983.81 92.95102.39 112.14119.00 125.61 132.22 138.83 145.44152.05158.66 165.27171.88185.11 198.33 211.55 231.38264.44 297.49
46.3252.7859.51 66.5173.7681.2688.9996.96105.15113.56 122.18 131.01140.04 149.28 158.70 168.32188.11208.62229.83 262.89 306.61344.94
37.9143.20 48.71 54.4460.3766.51 72.84 79.3686.0692.95 100.00 107.23 114.62122.18 129.90 137.77153.97 170.75 188.11215.17292.89 313.69
31.77 36.20 40.82 45.62 50.5955.7461.0466.5172.1377.8983.81 89.8796.06 102.39 108.86 115.46 129.03143.10 157.65 180.33 220.32213.33
27.13 30.91 34.85 38.95 43.20 47.5952.12 56.7861.58 66.51 71.5676.7382.0287.4392.9598.58110.17 122.18 134.60 153.97176.66 49.79
20.6423.5126.51 29.63 32.8636.20 39.6543.20 46.85 50.5954.44 58.37 62.39 66.51 70.7174.9983.8192.95 102.39 117.13 0.00 0.00
16.3818.6621.04 23.51 26.0828.73 31.4634.2837.18 40.15 43.20 46.3249.51 52.78 56.11 59.51 66.51 13.70 0.00 0.00
13.40 15.27 17.22 19.2521.3423.5125.75 28.06 30.43 32.86 35.36 37.91 40.53 43.20 18.370.00 0.00 0.00
11.23 12.80 14.43 16.1317.8919.7121.5823.51 25.50 27.54 27.460.00 0.00 0.00 0.00
9.5910.9312.32 13.77 15.27 16.83 18.43 20.08 0.80 0.00 0.00
8.319.4710.68 11.94 13.24 14.58 0.00 0.00 0.00
7.30 8.319.37 10.48 0.00 0.00
6.11 6.97 0.00 0.00
Pitch x Width
P x Einch
D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
Load
mm
C
mm
B2
mm
3,100 5,270 7,750
10,230 12,090 14,260 17,980
15,600 31,200 46,800 70,500 88,200
105,800 141,000
25.53 48.13 70.43 93.53
116.18 138.88 184.33
29.83 52.33 75.53 97.33
120.98 143.08 188.33
4.75 45.4436.1931.2435.454.7538.10 x 25.40 11.1122.231-1/2 x 1
120120-2120-3120-4120-5120-6120-8
-
Chain No.
PL RL CP-CL OL 2P-OL
ANSI STANDARDROLLER CHAIN
Chains also available in cottered style
ANSI STANDARDROLLER CHAIN
Pitch x Width
P x Einch
D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
LoadApprox.Weight
mm
C
mm
B2
mm
7.3814.6621.9329.2436.5343.81
4,1007,000
10,25013,50016,00018,900
21,00042,00063,00096,800
121,000 145,200
27.2751.5776.12
100.57125.02149.42
32.1756.9781.12
105.47130.72154.36
5.56 48.8742.2236.4437.185.5644.45 x 25.40 12.7125.401-3/4 x 1
140140-2140-3140-4140-5140-6
-
Chain No.
PL RL CP-CL OL 2P-OL
Horsepower Ratings - Single Strand Roller Chain
Type A Type B Type CLubri-cation
11121314151617181920212223242526283032354045
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 5 10 25 50 53 75 100 150 200 300 400 500 600 700 800 900 1000 1200 1400 1600 1800 2000 2200 2400 2700
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
1.14 1.24 1.34 1.45 1.55 1.65 1.75 1.86 1.96 2.06 2.17 2.27 2.37 2.48 2.58 2.68 2.89 3.10 3.30 3.61 4.13 4.65
2.21 2.41 2.61 2.81 3.01 3.21 3.41 3.61 3.82 4.02 4.22 4.42 4.62 4.82 5.02 5.22 5.62 6.02 6.43 7.03 8.03 9.04
5.32 5.81 6.29 6.78 7.26 7.74 8.23 8.71 9.20 9.68
10.16 10.65 11.13 11.62 12.10 12.58 13.55 14.52 15.49 16.94 19.36 21.78
10.36 11.30 12.24 13.18 14.12 15.06 16.00 16.95 17.89 18.83 19.77 20.71 21.65 22.60 23.54 24.48 26.36 28.24 30.13 32.95 37.66 42.37
10.95 11.95 12.94 13.94 14.93 15.93 16.93 17.92 18.92 19.91 20.91 21.90 22.90 23.90 24.89 25.89 27.88 29.87 31.86 34.85 39.83 44.80
15.28 16.67 18.06 19.45 20.84 22.23 23.62 25.01 26.40 27.79 29.18 30.57 31.96 33.35 34.74 36.13 38.91 41.68 44.46 48.63 55.58 62.53
20.15 21.98 23.81 25.64 27.47 29.30 31.13 32.97 34.80 36.63 38.46 40.29 42.12 43.95 45.79 47.62 51.28 54.94 58.61 64.10 73.26 82.42
57.84 63.10 68.36 73.61 78.87 84.13 89.39 94.65 99.90
105.16 110.42 115.68 120.94 126.20 131.45 136.71 147.23 157.74 168.26 184.03 210.33 236.62
76.24 83.17 90.10 97.03
103.96 110.89 117.82 124.75 131.68 138.61 145.54 152.47 159.40 166.33 173.27 180.20 194.06 207.92 221.78 242.57 277.22 311.88
86.80 98.90
111.52 120.21 128.79 137.38 145.97 154.55 163.14 171.73 180.31 188.90 197.48 206.07 214.66 223.24 240.42 257.59 274.76 300.52 343.45 386.38
66.03 75.24 84.83 94.81
105.15 115.83 126.86 138.22 149.89 161.88 174.17 186.76 199.64 212.80 226.24 239.95 268.16 297.40 327.63 358.00 409.15 460.29
52.40 59.78 67.32 75.24 83.44 91.92
100.67 109.68 118.95 128.46 138.22 148.21 158.43 168.87 179.53 190.41 212.80 236.00 259.99 297.40 363.35 433.56
42.89 48.87 55.10 61.58 68.29 75.24 82.40 89.77 97.36
105.15 113.13 121.30 129.67 138.22 146.94 155.85 174.17 193.16 212.80 243.41 297.40 221.34
35.94 40.95 46.18 51.61 57.23 63.05 69.05 75.24 81.59 88.12 94.81
101.66 108.67 115.83 123.15 130.61 145.97 161.88 178.34 203.99 153.78
0.00
30.69 34.97 39.43 44.06 48.87 53.83 58.96 64.24 69.66 75.24 80.95 86.80 92.78 98.90
105.15 111.52 124.63 138.22 152.27 135.27
0.00
23.35 26.60 29.99 33.52 37.17 40.95 44.85 48.87 53.00 57.23 61.58 66.03 70.58 75.24 79.99 84.83 94.81 18.64
0.00 0.00
18.53 21.11 23.80 26.60 29.50 32.50 35.59 38.78 42.06 45.42 48.87 52.40 56.01 37.90 0.00 0.00 0.00 0.00
15.16 17.28 19.48 21.77 24.15 26.60 29.13 31.74 34.42 35.82 0.00 0.00 0.00 0.00
12.71 14.48 16.33 18.25 20.24 22.29 24.41
0.00 0.00 0.00
10.85 12.36 13.94 15.58 17.28 0.00 0.00
9.40 10.72 12.08
0.00 0.00
8.25 0.72 0.00
0.00 0.00
29.73 32.44 35.14 37.84 40.54 43.25 45.95 48.65 51.36 54.06 56.76 59.47 62.17 64.87 67.57 70.28 75.68 81.09 86.50 94.60
108.12 121.63
39.19 42.75 46.32 49.88 53.44 57.00 60.57 64.13 67.69 71.25 74.82 78.38 81.94 85.51 89.07 92.63 99.76
106.88 114.10 124.70 142.51 160.32
Chains also available in cottered style
180
26
ANSI
STAN
DARD
ROLL
ER C
HAIN
160
27
ANSI
STAN
DARD
ROLL
ER C
HAIN
180
Chain No.
Pitch x Width
P x Einch
D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
LoadApprox.Weight
mm
C
mm
B2
mm
9.4018.6427.8937.2146.4655.70
5,4009,200
13,50017,80021,00024,800
26,20025,40078,600
121,200151,500181,800
32.7662.4191.76
120.56131.83161.11
37.0665.2193.76
124.96172.23230.73
6.35 58.5548.2641.6545.216.3550.80 x 31.75
14.2928.582 x 1-1/4
160160-2160-3160-4160-5160-6
-
Horsepower Ratings - Single Strand Roller Chain
Type A Type B Type CLubri-cation
11121314151617181920212223242526283032354045
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 5 10 25 47 50 75 100 150 200 300 400 500 600 700 800 900 1000 1100 1200 1400 1600 1800 2000 2200 2400
PL RL CP-CL OL 2P-OL
1.65 1.80 1.95 2.10 2.25 2.40 2.55 2.70 2.85 3.00 3.15 3.29 3.44 3.59 3.74 3.89 4.19 4.49 4.79 5.24 5.99 6.74
3.20 3.50 3.79 4.08 4.37 4.66 4.95 5.24 5.54 5.83 6.12 6.41 6.70 6.99 7.28 7.57 8.16 8.74 9.32
10.20 11.65 13.11
7.72 8.43 9.13 9.83
10.53 11.23 11.94 12.64 13.34 14.04 14.74 15.45 16.15 16.85 17.55 18.26 19.66 21.06 22.47 24.57 28.09 31.60
14.16 15.45 16.73 18.02 19.31 20.59 21.88 23.17 24.45 25.74 27.03 28.32 29.60 30.89 32.18 33.46 36.04 38.61 41.19 45.05 51.48 57.92
15.02 16.39 17.76 19.12 20.49 21.85 23.22 24.59 25.95 27.32 28.68 30.05 31.42 32.78 34.15 35.51 38.24 40.98 43.71 47.81 54.63 61.46
22.17 24.19 26.21 28.22 30.24 32.25 34.27 36.29 38.30 40.32 42.33 44.35 46.36 48.38 50.40 52.41 56.44 60.48 64.51 70.55 80.63 90.71
29.23 31.88 34.54 37.20 39.86 42.51 45.17 47.83 50.48 53.14 55.80 58.45 61.11 63.77 66.43 69.08 74.40 79.71 85.03 93.00
106.28 119.57
43.14 47.06 50.98 54.90 58.82 62.74 66.66 70.59 74.51 78.43 82.35 86.27 90.19 94.11 98.04
101.96 109.80 117.64 125.49 137.25 156.86 176.47
56.86 62.03 67.19 72.36 77.53 82.70 87.87 93.04 98.21
103.38 108.54 113.71 118.88 124.05 139.22 134.39 144.73 155.06 165.40 180.91 206.75 232.59
83.91 91.54 99.17
106.80 114.43 122.05 129.68 137.31 144.94 152.57 160.20 167.83 175.45 183.08 190.71 198.34 213.60 228.85 244.11 266.99 305.14 343.28
110.60 120.66 130.71 140.77 150.82 160.88 170.93 180.99 191.04 201.10 211.15 221.21 231.26 241.32 251.37 261.43 281.54 301.65 321.76 351.92 402.19 452.47
96.58 110.05 124.09 138.68 153.80 169.43 185.56 202.17 219.25 236.79 254.77 273.18 286.51 298.97 311.42 323.88 348.79 373.71 398.62 435.99 498.28 560.56
73.47 83.72 94.40
105.50 117.00 128.89 141.16 153.80 166.79 180.13 193.81 207.82 222.15 236.79 251.74 267.00 298.39 330.92 364.56 417.01 509.49 607.95
58.31 66.44 74.91 83.72 92.85
102.28 112.02 122.05 132.36 142.95 153.80 164.91 176.29 184.91 199.77 211.88 236.79 262.61 289.30 330.92 404.31 289.10
47.72 54.38 61.31 68.52 75.99 83.72 91.69 99.90
108.33 117.00 125.88 134.98 144.29 153.80 163.51 173.42 193.81 214.94 236.79 270.86 160.63
0.00
39.99 45.57 51.38 57.43 63.69 70.16 76.84 83.72 90.79 98.05
105.50 113.12 120.92 128.89 137.03 145.33 162.42 180.13 198.44 112.60
0.00
34.15 38.91 43.87 49.03 54.38 59.90 65.61 71.48 77.52 83.72 90.07 96.58
103.24 110.05 117.00 124.09 138.68 126.46 22.58 0.00
29.60 33.73 38.03 42.50 47.13 51.92 56.87 61.96 67.19 72.57 78.08 83.72 89.49 95.39
101.41 107.56 36.88 0.00 0.00
25.98 29.60 33.37 37.30 41.37 45.57 49.91 54.38 58.97 63.69 68.52 73.47 78.54 83.72 32.66 0.00 0.00
20.61 23.49 26.48 29.60 32.83 36.16 39.61 43.15 46.80 46.79 0.00 0.00 0.00 0.00 0.00
16.87 19.22 21.68 24.23 26.87 29.60 24.21 0.00 0.00 0.00
14.14 16.11 18.17 20.30 0.00 0.00 0.00
12.07 13.76 0.00 0.00
10.46 0.00
0.00
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
ANSI STANDARDROLLER CHAIN
Chains also available in cottered style
ANSI STANDARDROLLER CHAIN
Horsepower Ratings - Single Strand Roller Chain
Lubri-cation
11121314151617181920212223242526283032354045
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 2 5 10 25 43 50 75 100 150 200 300 400 500 600 700 800 900 1000 1100 1200 1400 1600 1800
Type A Type B Type C
2000
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
PL RL CP-CL OL 2P-OL
0.94 1.03 1.12 1.20 1.29 1.37 1.46 1.54 1.63 1.72 1.80 1.89 1.97 2.06 2.15 2.23 2.40 2.57 2.75 3.00 3.43 3.86
2.27 2.48 2.69 2.90 3.10 3.31 3.52 3.72 3.93 4.14 4.34 4.55 4.76 4.96 5.17 5.38 5.79 6.20 6.62 7.24 8.27 9.31
4.43 4.83 5.23 5.63 6.03 6.44 6.84 7.24 7.64 8.05 8.45 8.85 9.25 9.65
10.06 10.46 11.26 12.07 12.87 14.08 16.09 18.10
10.66 11.63 12.60 13.57 14.54 15.51 16.48 17.45 18.42 19.39 20.36 21.33 22.30 23.27 24.24 25.21 27.15 29.09 31.02 33.93 38.78 43.63
17.95 19.58 21.21 22.84 24.48 26.11 27.74 29.37 31.00 32.64 34.27 35.90 37.53 39.16 40.79 42.43 45.69 48.95 52.22 57.11 65.27 73.43
20.75 22.63 24.52 26.40 28.29 30.18 32.06 33.95 35.83 37.72 39.61 41.49 43.38 45.26 47.15 49.04 52.81 56.58 60.35 66.01 75.44 84.87
30.62 33.40 36.19 38.97 41.75 44.54 47.32 50.10 52.89 55.67 58.45 61.24 64.02 66.80 69.59 72.37 77.94 83.50 89.07 97.42
111.34 125.26
40.36 44.03 47.70 51.36 55.03 58.70 62.37 66.04 69.71 73.38 77.05 80.71 84.38 88.05 91.72 95.39
102.73 110.07 117.40 128.41 146.75 165.10
59.56 64.98 70.39 75.81 81.22 86.64 92.05 94.47
102.88 108.30 113.71 119.12 124.54 129.95 135.37 140.78 151.61 162.44 173.27 189.52 216.59 243.66
78.51 85.64 92.78 99.92
107.06 114.19 121.33 128.47 135.60 142.74 149.88 157.02 164.15 171.29 178.43 185.56 199.84 214.11 228.39 249.80 285.48 321.17
115.87 126.40 136.93 147.47 158.00 168.53 179.07 189.60 200.13 210.67 221.20 231.73 242.27 252.80 263.33 273.87 294.93 316.00 337.07 368.67 421.34 474.00
148.32 166.61 180.49 194.37 208.26 222.14 236.02 249.91 263.79 277.68 291.56 305.44 319.33 333.21 347.10 360.98 388.75 416.51 444.28 485.93 555.35 624.77
106.13 120.92 136.35 152.38 169.00 186.17 203.90 222.15 240.92 260.19 279.94 300.17 320.87 342.02 363.62 385.66 431.00 477.99 526.58 602.34 688.02 774.03
80.73 91.99
103.72 115.92 128.56 141.63 155.11 169.00 183.27 197.93 212.96 228.35 244.10 260.19 276.62 293.38 327.87 363.62 400.58 458.22 559.83 480.00
64.07 73.00 82.31 91.99
102.02 112.39 123.09 134.11 145.44 157.07 169.00 181.21 193.70 206.47 219.51 232.81 260.19 288.56 317.89 363.62 254.20
0.00
52.44 59.75 67.37 75.29 83.50 91.99
100.75 109.77 119.04 128.56 138.32 148.32 158.54 169.00 179.67 190.55 212.96 236.18 260.19 142.51
0.00
43.95 50.07 56.46 63.10 59.98 77.09 84.43 91.99 99.76
107.74 115.92 124.30 132.87 141.63 150.57 159.69 178.47 128.92
0.00 0.00
37.52 42.75 48.21 53.87 59.75 65.82 72.09 78.54 85.18 91.99 98.97
106.13 113.45 120.92 128.56 122.43
0.00 0.00
35.52 37.06 41.79 46.70 51.79 57.05 62.49 68.08 73.83 79.74 85.79 91.99 98.33 40.34 0.00 0.00
28.54 32.52 36.67 40.98 45.45 50.07 54.84 59.75 64.80 69.98 75.29 0.00 0.00 0.00
22.65 25.81 29.10 32.52 36.07 39.74 43.52 0.00 0.00 0.00 0.00
18.54 21.12 23.82 26.62 0.00 0.00 0.00
15.54 17.70 0.00 0.00
0.00 0.00
Chain No.
Pitch x Width
P x Einch
D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
LoadApprox.Weight
mm
C
mm
B2
mm12.6725.1437.6050.06
6,200 10,500 15,500 20,500
38,20076,400
114,600152,800
36.64 69.56
102.48 135.40
42.14 75.06
107.98 140.90
7.1465.84
54.2946.8650.857.1457.15 x 35.71 17.4635.712-1/4 x 1-13/32
180180-2180-3180-4
-
Chains also available in cottered style
28
ANSI
STAN
DARD
ROLL
ER C
HAIN
200
29
ANSI
STAN
DARD
ROLL
ER C
HAIN
240
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
Horsepower Ratings - Single Strand Roller Chain
Type A Type B Type CLubri-cation
11121314151617181920212223242526
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 2 5 10 25 36 50 75 100 150 200 250 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
ANSI STANDARDROLLER CHAIN
2.02 2.20 2.39 2.57 2.75 2.94 3.12 3.30 3.49 3.67 3.85 4.04 4.22 4.40 4.59 4.77
4.86 5.31 5.75 6.19 6.63 7.08 7.52 7.96 8.40 8.84 9.29 9.73
10.17 10.61 11.06 11.50
9.46 10.32 11.18 12.04 12.90 13.76 14.62 15.48 16.34 17.20 18.07 18.93 19.79 20.65 21.51 22.37
22.81 24.88 26.95 29.02 31.10 33.17 35.24 37.32 39.39 41.46 43.54 45.61 47.68 49.76 51.83 53.90
32.36 35.31 35.25 41.19 44.13 47.08 50.02 52.96 55.90 58.84 61.79 64.73 67.67 70.61 73.55 76.50
44.36 48.40 52.43 56.46 60.50 64.53 68.56 72.59 76.63 80.66 84.69 88.73 92.76 96.79
100.83 104.86
65.47 71.43 77.38 83.33 89.28 95.24
101.19 107.14 113.09 119.04 125.00 130.95 136.90 142.85 148.81 154.76
86.30 94.15
101.99 109.84 117.68 125.53 133.37 141.22 149.06 156.91 164.76 172.60 180.45 188.29 196.14 203.98
127.37 138.95 150.53 162.11 173.68 185.26 196.84 208.42 220.00 231.58 243.16 254.74 266.32 277.89 289.47 301.05
167.88 183.14 198.41 213.67 228.93 244.19 259.45 274.71 289.98 305.24 320.50 335.76 351.02 366.29 381.55 396.81
207.99 226.89 245.80 264.71 283.62 302.53 321.43 340.34 359.25 378.16 397.07 415.97 434.88 453.79 472.70 491.61
247.77 270.30 292.82 315.34 337.87 360.39 382.92 405.44 427.97 450.49 473.02 495.54 518.07 540.59 563.12 585.64
186.70 212.73 239.87 268.07 297.30 327.52 358.70 390.81 423.82 457.72 492.48 428.07 564.48 601.69 639.68 678.45
133.59 152.22 171.64 191.82 212.73 234.35 256.66 279.64 303.26 327.52 352.39 377.85 403.91 430.53 457.72 485.46
101.63 115.80 130.57 145.92 161.83 178.28 195.25 212.73 230.70 249.15 268.07 287.44 307.26 327.52 348.20 369.30
80.65 91.89
103.61 115.80 128.42 141.47 154.94 168.81 183.08 197.72 212.73 228.10 243.83 259.91 276.32 293.06
66.01 75.21 84.81 94.78
105.11 115.80 126.82 138.17 149.84 161.83 174.12 186.70 199.57 188.30 73.47 0.00
55.32 63.03 71.07 79.43 88.09 97.04
106.28 115.80 125.58 135.62 109.86
0.00 0.00 0.00 0.00
47.23 53.82 60.68 67.82 75.21 82.86 90.74 98.87 3.20 0.00 0.00
40.94 46.65 52.60 58.78 65.19 71.82 0.00 0.00 0.00
35.93 40.94 46.16 51.59 0.00 0.00
31.87 36.31 38.13 0.00
28.51 2.11 0.00
0.00 0.00
Chain No.
Pitch x Width
P x Einch
D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
LoadApprox.Weight
mm
C
mm
B2
mm
24.448.472.496.2
120.0143.7
13,500 23,000 33,800 44,600 52,700 62,100
70,000 140,000 210,000 280,000 350,000 420,000
49.35 93.30
137.20 181.10 225.00 268.90
55.35 99.20
143.20 187.10 231.00 280.40
240240-2240-3240-4
-
9.53 87.8372.3962.4867.819.5376.20 x 47.63 23.8147.633 x 1-7/8
240-5240-6
PL RL CP-CL OL 2P-OL
Chains also available in cottered style
Horsepower Ratings - Single Strand Roller Chain
Type A Type B Type CLubri-cation
11121314151617181920212223242526
Revolutions Per Minute - Small SprocketNo. of
Teeth in Small
Sprocket 2 5 10 25 40 50 75 100 150 200 250 300 400 500 600 700 800 900 1000 1100 1200 1400 1600 1800
TYPE A LUBRICATION - MANUAL OR DRIP TYPE B LUBRICATION - OIL BATH OR SLINGER DISC SPLASHING TYPE C LUBRICATION - OIL PUMP STREAMING
PL RL CP-CL OL 2P-OL
1.25 1.37 1.48 1.59 1.71 1.82 1.94 2.05 2.16 2.28 2.39 2.51 2.62 2.73 2.85 2.96
3.02 3.29 3.57 3.84 4.12 4.39 4.67 4.94 5.22 5.49 5.77 6.04 6.31 6.59 6.86 7.14
5.88 6.41 6.94 7.48 8.01 8.55 9.08 9.61
10.15 10.68 11.22 11.75 12.28 12.82 13.35 13.89
14.16 15.45 16.73 18.02 19.31 20.60 21.88 23.17 24.46 25.74 27.03 28.32 29.61 30.89 32.18 33.47
22.23 24.25 26.28 28.30 30.32 32.34 34.36 38.38 38.40 40.42 42.45 44.47 46.49 48.51 50.53 52.55
27.54 30.05 32.55 35.06 37.56 40.06 42.57 45.07 47.58 50.08 52.59 55.09 57.59 60.10 62.60 65.11
40.65 44.35 48.04 51.74 55.43 59.13 62.83 66.52 70.22 73.91 77.61 81.30 95.00 88.70 92.39 96.09
53.58 58.45 63.33 68.20 73.07 77.94 82.81 87.68 92.55 97.42
102.29 107.17 112.04 116.91 121.78 126.65
79.08 86.27 93.46
100.65 107.84 115.03 122.22 129.41 136.59 143.78 150.97 158.16 165.35 172.54 179.73 186.92
104.24 113.71 123.19 132.66 142.14 151.61 161.09 170.57 180.04 189.52 198.99 208.47 217.95 227.42 236.90 246.37
129.14 140.88 152.62 164.36 176.09 187.83 199.57 211.31 223.05 234.79 246.53 258.27 270.01 281.75 293.49 305.23
153.84 167.82 181.81 195.79 209.78 223.76 237.75 251.73 265.72 279.70 293.69 307.68 321.66 335.65 349.63 363.62
161.36 183.86 207.31 231.69 256.95 283.07 310.02 331.81 350.24 368.67 387.11 405.54 423.97 442.41 460.84 479.27
115.46 131.56 148.34 165.78 183.86 202.55 221.83 241.69 262.11 283.07 304.56 326.57 349.09 372.10 395.60 419.57
87.83 100.08 112.85 126.11 139.87 154.08 168.75 183.86 199.39 215.34 231.69 248.43 265.56 283.07 300.94 319.18
69.70 79.42 89.55
100.08 110.99 122.27 133.91 145.90 158.23 170.88 183.86 197.15 210.74 224.63 238.82 253.29
57.05 65.00 73.30 81.91 90.85
100.08 109.61 119.42 129.51 139.87 150.49 161.36 172.49 183.86 195.47 207.31
47.81 54.48 61.43 68.65 76.13 83.87 91.86
100.08 108.53 117.21 126.11 135.23 144.55 154.08 163.81 151.14
40.82 46.51 52.45 58.61 65.00 71.61 78.43 85.45 92.67
100.08 107.68 115.46 104.48 21.71 0.00 0.00
35.38 40.32 45.46 50.80 56.34 62.07 67.98 74.07 80.32 86.75 32.68 0.00 0.00 0.00
31.05 35.38 39.90 44.59 49.45 54.48 59.66 65.00 2.22 0.00 0.00
24.64 28.08 31.66 35.38 37.46 0.00 0.00 0.00 0.00
20.17 22.98 0.00 0.00 0.00
0.00 0.00
Chain No.
Pitch x Width
P x Einch
D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
TraversePitch
Max.Working
LoadApprox.Weight
mm
C
mm
B2
mm
15.9031.6047.3062.80
7,300 12,400 18,250 20,500
49,50099,000
148,500198,000
40.3576.15
111.90147.67
46.3582.15
117.90153.68
7.9271.55
60.3252.0754.887.9263.50 x 38.10 19.8539.682-1/2 x 1-1/2
200200-2200-3200-4
-
ANSI STANDARDROLLER CHAIN
Chains also available in cottered style
2P-OLCP-CL OLPL RL SC-CL
Chain No.
Pitch x Width
P x E D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
Pitch
mm
C
-
-
-
mm
B2
mm
B1
mm
25.45
29.01
37.92
45.57
46.58
25.40 x 17.02
31.75 x 19.56
15.88
19.05
25.40
27.94
29.21
38.10 x 25.40
44.45 x 30.99
50.80 x 30.99
-
-
-
-
-
31.88
36.45
48.36
59.56
58.55
16B16B-216B-316B-420B20B-220B-320B-424B24B-224B-328B28B-228B-332B32B-232B-340B40B-240B-348B48B-248B-3
18.1134.1150.0665.8620.1038.4056.6074.8027.0750.8775.3732.9562.7292.5033.1562.4091.7041.3077.45
113.6049.5595.20
140.80
19.7135.8152.1668.66
7,76015,52023,28031,04010,50021,00031,50042,00018,00036,00054,00026,00052,00078,00028,90057,80086,70042,50085,000
127,50064,000
128,000192,000
2.665.277.88
10.513.627.16
10.7514.35
7.0514.0020.74
9.5818.9628.34
9.2218.4227.6416.3032.0047.5025.0050.0075.00
1,6002,7004,0005,3001,9003,2504,7506,2703,2005,4508,0004,5007,650
11,2504,8008,150
12,0006,900
11,70017,25010,50017,85026,250
8.28 3.18 3.99 21.08 21.08
10.19 3.18 4.46 26.42 26.42
14.63 4.80 6.00 33.40 33.40
17.81 6.00 7.00 42.29 42.29
6.00 7.30 37.08 37.0815.90
22.89 8.00 8.20 52.96 52.96
29.24 9.50 12.00 63.88 63.88
55.75
70.56
-
63.50 x 38.10
76.20 x 45.72
39.37
48.26
-
-
-
72.29
-
91.21
Traverse Max.Working
LoadApprox.Weight
ConnectingLink
SCCL
CPCL
OL 2POL
Chain No.
04
Pitch x Width
D1
mm mm mm mm mm mm mm mm
Roller
D2
Pin
T1 T2 H F1 F2
Link
K
kg / m
Avg. Ulti.Tensile
Strength
kgf kgf
Pitch
mmC
3.35 4.45 1.85
2.31
0.62 0.13-
-5.64
5.005.000.62
mmB2
mmB1
5.00
4.006.00 x 2.80
8.00 x 3.00 0.78 0.78 7.11 7.11
9.53 x 5.72 6.35
8.51
3.28 1.00 1.28 8.26 8.26 10.24
12.70 x 7.75 4.45 1.49 1.58 10.92 11.81 13.92
15.88 x 9.65
4.10
4.77
8.53
11.30
13.28
15.6219.05 x 11.68
10.16
12.0719.46
05B05B-206B06B-206B-306B-408B08B-208B-308B-408108308408510B10B-210B-310B-412B12B-212B-312B-4
3.916.716.13
11.2816.4321.688.24
15.4622.6129.615.106.457.407.009.85
18.0326.5834.7811.2721.2430.9940.69
4.717.557.08
12.7317.6822.43
9.3417.0824.1130.24
6.606.958.909.00
11.5528.2028.0836.3813.3722.9032.7142.47
7.8313.2319.4323.4810.3417.0824.1130.246.606.958.909.00
12.2528.9028.8837.2814.5724.0433.9943.59
330580
1,0001,0801,9402,8503,5001,9203,6005,1006,6201,1201,5001,9501,2502,7205,4408,160
10,8803,2806,5609,840
13,120
0.160.330.410.741.101.450.661.301.952.600.280.420.590.380.921.812.703.601.212.403.594.78
110180180300450600400650
1,0001,350
180250330210500850
1,2501,650
7001,2001,7502,300
60
5.08 1.71 1.71 13.72 14.73
5.72 1.86 1.86 16.13 16.13
12.70 x 3.3012.70 x 4.8812.70 x 4.8812.70 x 6.25
7.757.757.757.77
3.66 1.00 1.00 9.91 9.915.804.09 1.28 1.28 10.30 10.307.904.09 1.58 1.58 11.15 11.158.803.60 1.28 1.28 8.51 9.919.06
--
-
-
-
-
---
-
16.59
Traverse
SCCL
CPCL
OL 2POL
ISO STANDARD ROLLER CHAIN
ISO STANDARDROLLER CHAIN
21.1135.8153.4669.7624.4042.2061.2080.5032.1756.7780.6737.4567.5297.3038.1567.4596.7051.5087.65
123.8060.05
105.70151.30
Max.Working
LoadApprox.Weight
ConnectingLink
-
-
-
-
-
-
-
-
-
-
-
-
P x E
mm
30
ISO S
TAND
ARD R
OLLE
R CHA
IN
31
ISO S
TAND
ARD R
OLLE
R CHA
IN
MinimizingSprocketWear
Solid rollers allow smooth sprocket engagement for longer service hours and reduce sprocket wear.
Lab tests have demonstrated that wear life can be increased 2 to 3 times over the conventional split bushing chains.
Running Time
Elon
gatio
n
CONVENTIONAL SBSR/ CONVENTIONAL / / SBSR /
Solid bushings have a perfect cylindrical shape with uniform wall thickness which, as opposed to the barrel-shaped split bushings, gives total surface contact with the pins. This improvement helps reduce initial elongation. In an application where initial elongation may be a problem, or if you simply demand the best, TYC SBSR series is your solution.
Reductionof Initial Elongation
1
ImprovedPerformance
2 3Tight production process control has enabled TYC to produce perfectly straight bushings. This results in significantly reduced friction between parts. It also helps to maintain lubrication within the bearing area, which extends chain life and reduces maintenance cost.
TYC SBSRSERIES
SOLID BUSHING AND
SOLID ROLLER
4LongerWear Life
32 33
TYC ANSI and ISO standard roller chains with attachments are made to meet ANSI B29.1 and ISO 606 standards, respectively. TYC produces numerous ANSI standard attachments, including bent or straight type attachments with tab hole, extended pins, and wide contour attachments with one or two holes. Attachment links can be supplied on one side or both sides of the chain. A wide variety of standard attachment compo-nents are stocked for faster delivery.
TYC ANSI / ISO standard roller chain attach-ments are also available with nickel-plating, zinc-plating, stainless steel, and optimum coat-ing for corrosion resistance. Custom attach-ments and various spacing of the attachments are also available upon request. For conveyors or other applications where parallel strands are used, chains can be supplied in matched sets for even loading and smooth operation.
ATTACHMENTSSTANDARD ANSI ISO
34 35
ANSI STANDARDATTACHMENTS
A-1BENT, ONE SIDE, ONE HOLE EACH TAB
K-1BENT, TWO SIDES, ONE HOLE EACH TAB
SA-1STRAIGHT, ONE SIDE, ONE HOLE EACH TAB
SK-1STRAIGHT, TWO SIDES, ONE HOLE EACH TAB
Chain No.
Pitch x Width
P x E
inch mm mm mm mm mm mm mm mm mm mm
Roller Pin
T F1 F2 A1 A2 A1 A2F3 D3 G
mm mm
D1 D2
Link
mm
5.08
7.77
7.92
10.16
11.91
15.88
19.05
22.23
25.40
28.58
3.60
3.60
3.98
5.09
5.96
7.94
9.54
11.11
12.71
14.29
1.27
1.27
1.52
2.03
2.39
3.18
3.96
4.75
5.56
6.35
7.80
8.50
10.41
13.01
15.64
20.82
26.03
31.24
36.44
41.65
9.04
9.90
12.06
15.08
18.09
24.13
30.16
36.19
42.22
48.26
13.10
16.28
17.46
24.70
28.02
39.29
43.00
53.10
63.45
67.87
9.52
11.90
12.70
15.88
19.05
25.40
31.75
38.10
44.45
50.80
13.40
16.46
17.55
24.60
26.33
34.05
42.09
51.35
63.50
66.17
9.52
12.70
12.70
15.88
18.26
24.61
31.75
36.53
44.45
50.80
7.94
9.52
9.52
14.28
15.88
19.05
25.40
28.58
34.90
38.10
2.60
3.33
3.33
5.08
5.08
6.63
8.21
9.81
11.38
13.11
6.35
7.14
7.92
10.31
11.91
15.88
19.84
23.01
28.58
31.75
35
41
40
50
60
80
100
120
140
160
3/8 x 3/16
1/2 x 1/4
1/2 x 5/16
5/8 x 3/8
3/4 x 1/2
1 x 5/8
1-1/4 x 3/4
1-1/2 x 1
1-3/4 x 1
2 x 1-1/4
9.53 x 4.78
12.70 x 6.35
12.70 x 7.92
15.88 x 9.53
19.05 x 12.70
25.40 x 15.88
31.75 x 19.05
38.10 x 25.40
44.45 x 25.40
50.80 x 31.75For chain size 35, D1 is bush diameter
Attachment A1K1 SA1SK1
36 37
ANSI
STAN
DARD
ATTA
CHME
NTS
ANSI
STAN
DARD
ATTA
CHME
NTS
G
ANSI STANDARDATTACHMENTS
Chain No.
Pitch x Width
P x E
inch mm mm mm mm mm mm mm mm
Roller Pin
T F2 A1 A2 F3 D3 M G
mm mm
D1 D2
Link
mm
5.08
7.77
7.92
10.16
11.91
15.88
19.05
22.23
25.40
28.58
3.60
3.60
3.98
5.09
5.96
7.94
9.54
11.11
12.71
14.29
1.27
1.27
1.52
2.03
2.39
3.18
3.96
4.75
5.56
6.35
9.04
9.90
12.06
15.08
18.09
24.13
30.16
36.19
42.22
48.26
14.38
19.70
17.46
24.70
26.99
35.23
45.10
53.10
63.45
71.50
9.52
14.94
12.70
15.88
19.05
25.40
31.75
38.10
44.45
50.80
18.33
20.90
23.10
28.72
36.25
48.64
61.91
71.10
80.80
98.80
2.60
4.76
3.33
5.08
5.08
6.63
8.21
9.81
11.38
13.11
9.52
12.70
12.70
15.88
19.05
25.40
31.75
38.10
44.45
50.80
6.35
7.75
7.92
10.31
11.91
15.88
19.84
23.01
28.58
31.75
35
41
40
50
60
80
100
120
140
160
3/8 x 3/16
1/2 x 1/4
1/2 x 5/16
5/8 x 3/8
3/4 x 1/2
1 x 5/8
1-1/4 x 3/4
1-1/2 x 1
1-3/4 x 1
2 x 1-1/4
9.53 x 4.78
12.70 x 6.35
12.70 x 7.92
15.88 x 9.53
19.05 x 12.70
25.40 x 15.88
31.75 x 19.05
38.10 x 25.40
44.45 x 25.40
50.80 x 31.751. For chain size 35, D1 is bush diameter2. Size 41 attachments are non-standard
Attachment
WA-1WIDE CONTOUR-BENT
ONE SIDE, ONE HOLE EACH TAB
WK-1WIDE CONTOUR-BENT
TWO SIDES, ONE HOLE EACH TAB
WA-2WIDE CONTOUR-BENT
ONE SIDE, TWO HOLES EACH TAB
WK-2WIDE CONTOUR-BENT
TWO SIDES, TWO HOLES EACH TAB
ANSI STANDARDATTACHMENTS
Chain No.
Pitch x Width
P x E
Roller Pin
T F1 F2D1 D2 L
Link
inch mm mm mmmm mm mmmm
5.08
7.77
7.92
10.16
11.91
15.88
19.05
22.23
25.40
28.58
39.68
3.60
3.60
3.98
5.09
5.96
7.94
9.54
11.11
12.71
14.29
19.85
9.52
9.52
9.52
11.91
14.27
19.05
23.83
28.58
33.32
38.10
47.62
1.27
1.27
1.52
2.03
2.39
3.18
3.96
4.75
5.56
6.35
7.92
7.80
8.50
10.41
13.01
15.64
20.82
26.03
31.24
36.44
41.65
52.07
9.04
9.90
12.06
15.08
18.09
24.13
30.16
36.19
42.22
48.26
60.32
35
41
40
50
60
80
100
120
140
160
200
3/8 3/16
1/2 1/4
1/2 5/16
5/8 3/8
3/4 1/2
1 5/8
1-1/4 3/4
1-1/2 1
1-3/4 1
2 1-1/4
2-1/2 1-1/2
9.53 4.78
12.70 6.35
12.70 7.92
15.88 9.53
19.05 12.70
25.40 15.88
31.75 19.05
38.10 25.40
44.45 25.40
50.80 31.75
63.50 38.10
D-1 ATTACHMENTSINGLE PIN ONE SIDE
D-3 ATTACHMENTDOUBLE PINS ONE SIDE
For chain size 35, D1 is bush diameter
38 39
ANSI
STAN
DARD
ATTA
CHME
NTS
ANSI
STAN
DARD
ATTA
CHME
NTS ANSI STANDARD
ATTACHMENTS
Chain No.
Pitch x Width
P x E
inch mm mm mm mm mm mm mm
Roller Pin
T F2 A1 A2 F3 D3 M
mm mm
D1 D2
Link
mm
5.08
7.92
10.16
11.91
15.88
19.05
22.23
25.40
3.60
3.98
5.09
5.96
7.94
9.54
11.11
12.71
1.27
1.52
2.03
2.39
3.18
3.96
4.75
5.56
9.05
12.07
12.23
18.09
24.13
30.16
36.20
42.23
14.75
17.40
24.70
26.00
34.41
44.00
51.35
63.50
9.52
12.70
15.88
19.05
25.40
31.75
36.53
44.45
18.33
23.10
28.72
36.25
48.65
61.91
74.30
86.68
2.60
3.33
5.08
5.08
6.63
8.21
9.81
11.38
9.52
12.70
15.88
19.05
25.40
31.75
38.10
44.45
35
40
50
60
80
100
120
140
3/8 x 3/16
1/2 x 5/16
5/8 x 3/8
3/4 x 1/2
1 x 5/8
1-1/4 x 3/4
1-1/2 x 1
1-3/4 x 1
9.53 x 4.78
12.70 x 7.92
15.88 x 9.53
19.05 x 12.70
25.40 x 15.88
31.75 x 19.05
38.10 x 25.40
44.45 x 25.40For chain size 35, D1 is bush diameter
Attachment
WSA-1WIDE CONTOUR-STRAIGHT
ONE SIDE, ONE HOLE EACH TAB
WSK-1WIDE CONTOUR-STRAIGHT
TWO SIDES, ONE HOLE EACH TAB
WSA-2WIDE CONTOUR-STRAIGHT
ONE SIDE, TWO HOLES EACH TAB
WSK-2WIDE CONTOUR-STRAIGHT
TWO SIDES, TWO HOLES EACH TAB
40 41
ISO S
TAND
ARD A
TTAC
HMEN
TS
ISO S
TAND
ARD A
TTAC
HMEN
TS
A-1BENT, ONE SIDE, ONE HOLE EACH TAB
K-1BENT, TWO SIDES, ONE HOLE EACH TAB
SA-1STRAIGHT, ONE SIDE, ONE HOLE EACH TAB
SK-1STRAIGHT, TWO SIDES, ONE HOLE EACH TAB
ISO STANDARDATTACHMENTS
Chain No.
Pitch x Width
P x E
mm mm mm mm mm mm mm mm mm mm
Roller Pin
T1 T2 F1
mm
F2 A1 A2 A1 A2F3 D3 G
mm mm
D1 D2
Link
mm
6.35
8.51
10.16
12.07
15.88
19.05
25.40
27.94
3.28
4.45
5.08
5.72
8.28
10.19
14.63
15.90
1.00
1.49
1.71
1.86
3.18
3.18
4.80
6.00
1.28
1.58
1.71
1.86
3.99
4.46
5.57
7.30
8.26
10.92
13.72
16.13
21.08
26.42
33.40
37.08
8.26
11.81
14.73
16.13
21.08
26.42
33.40
37.08
13.50
18.20
22.30
26.10
36.30
42.55
54.20
61.50
9.52
12.70
15.88
19.05
25.40
31.75
38.10
44.45
13.60
18.85
22.95
28.50
33.95
42.10
53.38
9.52
13.35
16.50
21.45
23.15
30.50
36.00
8.00
11.00
14.28
15.88
19.05
25.70
30.00
35.00
2.6
4.3
5.3
6.4
6.4
8.4
10.5
13.1
6.5
8.9
10.3
13.5
15.9
19.8
26.7
28.6
06B
08B
10B
12B
16B
20B
24B
28B
9.53 x 5.72
12.70 x 7.75
15.88 x 9.65
19.05 x 11.68
25.40 x 17.02
31.75 x 19.56
38.10 x 25.40
44.45 x 30.99
Attachment A1K1 SA1SK1
06B
08B
10B
12B
16B
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
13.50
19.00
27.00
29.10
42.00
9.50
13.10
16.70
18.60
28.90
13.80
20.70
27.36
29.00
41.50
9.00
14.70
17.20
18.70
28.60
8.00
12.50
15.00
18.50
25.00
3.5
4.5
5.5
6.6
9.0
6.5
Recommended