SOFTWARE & SERVICES[English]
T O T A L
S H I P
C A R E
1 PrimeShip-HULLCareHull Maintenance Information Service
2 PrimeShip-CAPCondition Assessment Program
3 PrimeShip-OASOil Analysis Service
4 Fleet Management SupportFleet Management Support Software
5 ClassNK CMAXSMachinery Maintenance System
6 ClassNK-PEERLESSSoftware for Optimal Ballast Water Management Systems Installation
MAINTENANCE
1 PrimeShip-SHAFTShaft Alignment Analysis Program
2 PrimeShip-CRANKCrankshaft Stress Calculation Service
3 PrimeShip-TORRESShaft Torsional Vibration Analysis Service
MACHINERY
Comprehensive Software and Services for Total Ship Care
DESIGN
CONSTRUCTION
OPERATION
5 PrimeShip-CTF for PSPC Coating Technical File (CTF)Preparation Support System
1 PrimeShip-IPCAIntegrated System for Ship Performance Capability
2 PrimeShip-NAPA Manager NK-Customized Program for NAPA
3 PrimeShip-HULLRule Calculation System and Direct Strength Assessment System
4 PrimeShip-CAD InterfaceInterface Program for Data Linkage between 2D/3D CAD and Rule Calculation System
HULL
1
T O T A L S H I P C A R ESOFTWARE & SERVICES
01
1 NK-PASSElectric Plan Approval System
INFORMATION SUPPORT
3 NK-SHIPSOnline Status Information Service for Class and Statutory Survey/ISM and ISPS Audit/MLC Inspection
4 e-ApplicationOnline Application System for Surveys and Audits
5 ClassNK Archive CenterArchive Center for As-built Drawings Storage Service/ GBS-Ship Construction File Storage Service
1 PrimeShip-CHEMISYSIntegrated Database System for Chemical Products
2 PrimeShip-DG/Bulk CargoIMDG/IMSBC Loading Requirement Program
OPERATION
3 PrimeShip-ETASEmergency Technical Assistance Service
1 PrimeShip-GREEN/SRMShip Recycling Management
2 PrimeShip-GREEN/MinPowerSoftware for Assessment of Minimum Propulsion Power
ENVIRONMENT
3 PrimeShip-GREEN/ProSTASoftware for Progressive Speed Trial Analysis
2 e-ProductOnline Application Service for Survey of Material and Equipment
4 PrimeShip-GREEN/EEOIEEOI Calculation and Analysis System
5 ClassNK-NAPA GREENComprehensive Software Solution for Eco-Eff icient Operations
ClassNK develops software and services to provide comprehensive vessel support,
using vast technical experience gained over many years as a classification society.
ClassNK software and services can support vessels from design stage, through operation,
maintenance, and surveys, right up to recycling.
1
1
1
1
1
1
2
02
Contact
■Hull Department
■Hull Rules Development Department
■Survey Operations Headquarters
■NAPA Customer Service
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
Tel: +81-3-5226-2018
Tel: +81-3-5226-2181
Tel: +81-3-5226-2027
Tel: +358-9-22-813-888
S O F T W A R E & S E R V I C E S
DES IGN
CONSTRUCTION
OPER ATION
H U L L
PrimeShip-HULLPrimeShip-HULL(Rules)/CSR Bulk Carrier
PrimeShip-CAD3D viewer
NAPASteel NAPA IPCA DXF,DWG
PrimeShip-HULL(Rules)/CSR Tanker
Interface
PrimeShip-HULL(Rules)/HCSR
XML for Ship3D XML for Performance
PrimeShip-CAD XML Schema Group
DamageStability
Calculation
LoadingManual
Stability Information
3D Model on NAPA Database Documents for Approval
CTF
Coating Technical FilePrimeShip-CTFfor PSPC
Report(Output)
Server inData Center
ShipyardUser
Access anywherein the world via Internet
Statutory Compliance Manager
1 PrimeShip-IPCA Integrated System for Ship Performance Capability
PrimeShip-NAPA Manager NK-Customized Program for NAPA2
PrimeShip-HULL Rule Calculation System and Direct Strength Assessment System3
PrimeShip-CAD Interface4 Interface Program for Data Linkage between 2D/3D CAD and Rule Calculation System
Coating Technical File (CTF)Preparation Support System PrimeShip-CTF for PSPC5
■Overall Structure of Data Linkage
Contact Hull Department
Contact Hull Department, NAPA Customer Service
Contact Hull Department or Hull Rules Development Department
Contact Hull Rules Development Department
Contact Survey Operations Headquarters
PrimeShip-IPCA is a Windows OS-based software package that calculates water displacement, trim, stability, longitudinal strength and other performance factors of a vessel during the design stage. The software allows calculations at design stage to be carried out in line with class rules, helping reduce design lead times. The software contains design software Design-IPCA and calculation sof tware for onboard loading computer sys tems Onboard-IPCA Calculation Engine, offering full support coverage during design and operation.
PrimeShip-NAPA Manager (Statutory Compliance Manager for NAPA system users) is a program offered free of charge that uses 3D vessel models created during the design stage using NAPA software to calculate stability, longitudinal strength and other factors based on class rules. The program can be used in conjunction with NAPA sof tware to create drawings for plan approval to help reduce design lead times. NAPA software is required to use this program.
PrimeShip-CAD Interface is a program provided free of charge to l ink 2D/3D CAD sof tware wi th CSR-based ru le ca lcu lat ion software. The program allows users to convert data from CAD and per formance capability calculation software for use directly with other sof tware to help prevent design errors. Pr imeShip-CAD Interface can link data between various types of software.
PrimeShip-HULL is a free software package that contains programs for rule calculation and direct strength calculation based upon structural rules. The PrimeShip-HULL (HCSR), PrimeShip-HULL (Rules) and PrimeShip-HULL (DSA) programs allow designers to perform calculations and assessments based on IACS Common Structural Rules (CSR) and ClassNK Rules to help reduce design lead times. A dedicated homepage and online support desk are available to provide users with technical support and other assistance as needed. Note: Either Patran and MSC.Nastran (not included), or HyperWorks (not included) is needed to run PrimeShip-HULL (DSA).
PrimeShip-CTF for PSPC is a cloud-based suppor t tool provided free of charge to help create coating technical f i les . With this sof tware users can compile and manage logs and data for onboard CTFs via the internet in line with the IMO Per formance Standards for Protective Coatings.
HU
LL
04
Contact
■Machinery Department
■Marine Industrial Service Department
E-mail: [email protected]
E-mail: [email protected]
Tel: +81-3-5226-2023
Tel: +81-3-5226-2176
S O F T W A R E & S E R V I C E S
DES IGN
CONSTRUCTION
OPER ATION
M AC H I N E RY
Rel
ativ
e di
spla
cem
ent
(mm
)
Rel
ativ
e di
spla
cem
ent
(mm
)
Distance from engine room bulkhead (m) Distance from engine room bulkhead (m)
Measurement
1
2 PrimeShip-CRANK Crankshaft Stress Calculation Service
3 PrimeShip-TORRES Shaft Torsional Vibration Analysis Service
PrimeShip-SHAFT Shaft Alignment Analysis Program
■Calculation Software
■Evaluation of Essential Items Relevant to Torsional Vibration
■Comprehensive Analysis Reports
■Finite Element Analysis
Contact Machinery Department
Contact Machinery Department
Contact Marine and Industrial Service Department or Machinery Department
Pr imeShip-SHAFT is a program provided free of charge to help des igner s comply wi th ClassNK’s Guidelines on Shaf ting Alignment and analyze shaf t alignment based on the Guidelines. Using this software, designers can easily calculate alignment in line with ClassNK rules and guidance, as well as determine the optimal position for shaft bearings.
PrimeShip-CRANK is a fee-based service that offers strength evaluations of diesel engine crankshafts in line with ClassNK and IACS rules. Users can determine if a crank shaft meets strength requirements and receive a statement of compliance through this service.
PrimeShip-TORRES is a fee-based service that analyzes shaft torsional vibration in line with ClassNK and IACS rules . Users can evaluate torsional vibration at the design stage and receive analysis reports indicating any occuring torsional vibration stress and allowable values through this service.
MA
CH
INE
RY
06
Contact
■Natural Resources and Energy Department
■Material and Equipment Department
■Survey Operations Headquarters
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
Tel: +81-3-5226-2042
Tel: +81-3-5226-2020
Tel: +81-3-5226-2027
S O F T W A R E & S E R V I C E S
DES IGN
CONSTRUCTION
OPER ATION
O P E R AT I O N
List of chemical products which can be loaded
List of chemical products which cannot be loaded
Output
SEARCH
Database
List of tank structure and equipment/installations
Design data
Chemicalproducts
Chemicaltankers
Chemical products which can/cannot be loaded
Check construction and equipment details
Loadable cargo list
Particulars
Loadable cargoes
Non-loadable cargoes, Substandard items
① Input vessel particulars including construction and loading equipment information ② Results
GO TOREPAIR YARD
Occasional Survey- Confirm ship’s condition- Temporary Repair Plan- Ascertain Seaworthiness to sail to Repair Port/Yard
Successful Salvage
Salvage
ETAS Team
Stability at Damage Condition &Residual Longitudinal Strength
Report & Advice of Countermeasures
Calculation
Damage Stability
ETASAdvice
Accident
1 PrimeShip-CHEMISYS Integrated Database System for Chemical Products
3 PrimeShip-ETAS Emergency Technical Assistance Service
2 PrimeShip-DG/Bulk Cargo IMDG/IMSBC Loading Requirement Program
■24 hours a day, 365 days a year
■Overview of Design Support System [for designers]
■Using PrimeShip-DG/Bulk Cargo
Contact Natural Resources and Energy Department
Contact Material and Equipment Department
Contact Survey Operations Headquarters
PrimeShip-CHEMISYS is a fee-based software package offering comprehensive support for designers, owners, and managers of chemical tankers during design, construction, and operation. PrimeShip-CHEMISYS (Search & Data) allows users to select and view what type of cargoes can be car r ied by each vessel . PrimeShip-CHEMISYS (Onboard) offers support for cargo loading plans and loading operations.
PrimeShip-ETAS is fee-based vessel suppor t service offered by ClassNK to shipowners to provide assistance during accidents including but not l im i ted to g round ing , co l l i s i on , and explosions, to help ensure the safety of vessels and to protect and limit any damage to the marine environment. ClassNK ETAS works in close communication with shipowners and salvagers during marine casualties offering advice to ensure salvage operations are carried out safely with as little impact to the environment as poss ib le . The ETAS team is compr ised of experienced surveyors on hand 24/7 to provide emergency assistance.
PrimeShip-DG/Bulk Cargo is a fee-based software package that allows users to create lists of loadable cargoes (solid bulk cargoes and dangerous goods) based on the structure and facilities of vessels in line with SOLAS and the IMSBC Code. Users can easily identify which cargo types can be loaded on each type of vessel, helping expedite cargo planning. Users can also perform reverse searches to identify which type of vessel structures or facilities would be appropriate for carrying specific types of cargoes, and create a cargo vessel database to expedite cargo planning.
OP
ER
AT
ION
08
Contact
■Classification Department
■Hull Rules Development Department
■Marine Industrial Service Department
■Survey Operations Headquarters
■Practical R&D Promotion Department
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
Tel: +81-43-294-6940
Tel: +81-3-5226-2181
Tel: +81-3-5226-2176
Tel: +81-3-5226-2027
Tel: +81-3-5226-2025
S O F T W A R E & S E R V I C E S
DES IGN
CONSTRUCTION
OPER ATION
M A I N T E N A N C E
CMAXS cloud database
CMAXS cloud database
Color-coded graph of measured points
Measurement record table
Highlighted cells show substantially corroded parts
FMS Ship Monitoring
Provide Services
Orders
FMS Due Date Management
Ship Management Company
Information Exchangevia Internet
Makers
Service Engineers ClassNK Flag State
Combustion test using FIA-100FCA (Standard: IP541/06)
SynchronizedSynchronizedPlanned maintenance managementSpare parts inventory managementCondition diagnosis data
Planned maintenance managementSpare parts inventory managementCondition diagnosis data
Shipping companyShip management
company
Shipping companyShip management
company
EquipmentmanufacturerEquipment
manufacturerNKNK CrewCrew CrewCrew CrewCrew
Maintenanceapplications managementand condition diagnosis
Maintenanceapplications managementand condition diagnosis
Onboard LAN systemOnboard LAN system
SynchronizedSynchronizedPlanned maintenance managementSpare parts inventory managementCondition diagnosis data
Planned maintenance managementSpare parts inventory managementCondition diagnosis data
InternetInternet
1 PrimeShip-HULLCare Hull Maintenance Information Service
PrimeShip-CAP Condition Assessment Program2
PrimeShip-OAS Oil Analysis Service3
Fleet Management Support Fleet Management Support Software4
ClassNK CMAXS5
ClassNK-PEERLESS 6 Software for Optimal Ballast Water Management Systems Installation
Machinery Maintenance System
■PrimeShip-HULLCare/2D internet
■Fuel Oil Analysis
■Sample for Rating
■System Concept
■PrimeShip-HULLCare/3D Model (Optional service)
Contact Marine and Industrial Service Department
Contact 2D: Classification Department / 3D: Hull Rules Development Department
Contact Marine and Industrial Service Department
Contact Survey Operations Headquarters
Contact Marine and Industrial Service Department
Contact Practical R&D Promotion Department
PrimeShip-HULLCare is a service that compiles and categorizes survey data collected from across ClassNK’s global service network to provide hull maintenance information for each vessel registered for the Enhanced Survey Program scheme. Users can verify the history of the hull condition for each of its vessels, and create an appropriate maintenance management plan. PrimeShip-HULLCare is an internet based service, which allows users access 24/7 from anywhere in the world. In addition, an optional fee-based service for 3D models is also available.
PrimeShip-CAP (Condition Assessment Program) is a fee-based service that allows users to assess and verify whether hull conditions meet or exceed class rules and international regulations. Users can obtain a 1 (highest) to 4 (lowest) grade of their hull condition based on onboard surveys, as well as receive comprehensive reports and certificates through this service. Hulls awarded condition levels of grade 2 and above rank very highly, verifying maintenance conditions are satisfactory, which is particularly useful for chartered vessels.
ClassNK’s Fleet Management Support is a program provided free of charge to help users manage their NK-classed vessels. This software works in conjunction with the classed vessel and ISM/ISPS online information service NK-SHIPS, allowing users to conf irm the status of any required surveys, audits or certif ications, to easily manage vessel maintenance.
PrimeShip-OAS is a fee-based fuel oil and stern tube lubricant analysis service. The service offers fuel oil analysis based on ISO and J IS standards, and lubr icant analysis as par t of propeller shaf t condition monitoring, allowing users to more effectively manage and maintain their vessels.
ClassNK CMAXS is fee-based cloud system offer ing users sof tware and services to support onboard machinery maintenance and monitoring. The system uses data collected by sensors installed onboard vessels for the early detection of abnormalities and condition monitoring for machinery. Additionally, the system shows onboard machinery maintenance plans and allows users to input the results of maintenance work via a user-fr iendly interface. The data is stored on a cloud system, allowing all relevant users access to the information anytime from anywhere in the world.
ClassNK-PEERLESS is a fee-based software program that allows users to dramatically shorten the design process for installing ballast water management systems on existing vessels. Factors such as lack of engine room space and complicated piping make installing ballast water management systems on existing vessels a difficult process. ClassNK-PEERLESS uses data gathered from 3D laser scanners to create highly accurate 3D models, greatly simplifying the process to cut down on design lead times.
MA
INT
EN
AN
CE
10
Contact
■Ship Recycling Team
■EEDI Department
■Marine and Industrial Service Department
■NAPA
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
Tel: +81-3-5226-2058
Tel: +81-3-5226-2176
Tel: +358-9-22-813-1
S O F T W A R E & S E R V I C E S
DES IGN
CONSTRUCTION
OPER ATION
E N V I RO N M E N T
Supplier
Shipbuilder
Apply / Approve
Transfer the Ship Data
NK
Shipowner
SDoC
Ship Info.
MD
MDPurchase List
MD Library
Ship Location Info. IHMLocation
【 Ship 】
Request / Respond (Acting Registration)
Speed correction for wind, waves, current, shallow water,
displacement,water temperature and
water density
Vrefの算出
1 PrimeShip-GREEN/SRM
PrimeShip-GREEN/MinPower2
PrimeShip-GREEN/ProSTA Software for Progressive Speed Trial Analysis3
PrimeShip-GREEN/EEOI4
ClassNK-NAPA GREEN5
Ship Recycling Management
EEOI Calculation and Analysis System
Comprehensive Software Solution for Eco-Efficient Operations
Software for Assessment of Minimum Propulsion Power
■Concept
■Analysis of Calculation Results
■Estimation of Reference Ship Speed (Vref) for EEDI
Contact Ship Recycling Team
Contact EEDI Department
Contact EEDI Department
Contact EEDI Department
Contact Marine and Industrial Service Department, NAPA
PrimeShip-GREEN/SRM is a web-based system offering suppor t to the industry for the Ship Recycling Convention. The system is provided free of charge to shipbuilders and suppliers. Pr imeShip-GREEN/SRM facil i tates information exchange between shipbuilders , shipping companies and suppliers at the development and maintenance of Inventory of Hazardous Materials (IHM: list indicating quantity & location of hazardous materials on board) generating IHM automatically with minimum additional input, drastically reducing the burden on the industry.
PrimeShip-GREEN/MinPower is a program provided free of charge to help users assess the minimum propulsion power for bulk carriers, tankers or combination carriers in adverse weather conditions in accordance with IMO regulations. The sof tware allows users to easily assess the minimum propulsion power taking into account factors such as added resistance in irregular waves, and automatically create graphs for class approval, helping to greatly reduce design lead times.
PrimeShip-GREEN/EEOI is a free software package that allows users to evaluate GHG (CO2) emission levels during operation, enabling users to calculate and analyze their Energy Eff iciency Operational Indicator (EEOI). The software gives users an understanding of the energy eff iciency of a vessel during operation, allowing for operation-specific vessel analysis and management.
PrimeShip-GREEN/ProSTA is a free program that allows users to analyze ship speed correction at progressive speed trials taking into account factors such as wind , cur rent , wave , sha l low water, d isplacement , water temperature and water density in compliance with ISO 15016:2015. The software allows users to easily analyze the speed cor rec t ion a t progress i ve speed t r ia l s , and automatically creates graphs for class approval, helping to greatly reduce design lead times.
ClassNK-NAPA GREEN is an advanced shipping solution for eco-eff icient operations. It increases f leet ef f iciency by providing improved transparency, per formance evaluation and dynamic optimization tools for route, speed and trim resulting in safe and efficient voyage execution.
EN
VIR
ON
ME
NT
12
Contact
■Hull Department
■Information Technology Department
■Machinery Department
■Information Service Department
■Classification Department
■Survey Operations Headquarters
■Safety Management Systems Department
■NK Archive Center Project Team
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
E-mail: [email protected]
Tel: +81-3-5226-2017
Tel: +81-43-294-5467
Tel: +81-3-5226-2023
Tel: +81-43-294-5451
Tel: +81-43-294-5797
Tel: +81-3-5226-2027
Tel: +81-3-5226-2173
S O F T W A R E & S E R V I C E S
DES IGN
CONSTRUCTION
OPER ATION
I N F O R M AT I O NS U P P O RT
ExamineePlans
Examine plansand
input comments
Notify completionof examination by e-mail
Submit printed plans
Shipbuilder,Manufacturer,Ship Designer
etc.
SendePlans
Downloadapproved ePlans,
Refer to comments
1 NK-PASS Electric Plan Approval System
3
e-Application Online Application System for Surveys and Audits4
ClassNK Archive Center5
e-Product 2
NK-SHIPS
Online Application Service for Survey of Material and Equipment
Online Status Information Service for Class and Statutory Survey/ISM and ISPS Audit/MLC Inspection
Archive Center for As-built Drawings Storage Service/GBS-Ship Construction File Storage Service
■Ship Survey Records and Survey History
■Online Application Window for Surveys and Audits ■Link with NK-SHIPS
Contact Hull Department or Information Technology Department
Contact Machinery Department
Contact Where to apply: Information Service Department / Inquiries for the Service & Operation: Classification Department or Safety Management Systems Department
Contact Where to apply: Information Service Department / Inquiries for the Service & Operation: Survey Operations Headquarters or Safety Management Systems Department
Contact Archive Center Project Team
NK-PASS is a free ser vice that allows shipyards , equipment manufacturers and designers to replace printed plans and drawings with electronic versions that can be submitted for class approval and returned electronically. Users can confirm the status of submit ted drawings and approval results in real time via the internet , greatly reducing the time and costs associated with approval (such binding, postage, etc.), allowing users to manage their plans and drawings more ef f iciently. The optional NK-PASS EDI (Exchange Data Inter face) service is a standard inter face linked to customer’s own system that allows users to exchange electronic drawings between NK-PASS and the customer’s system.
NK-SHIPS is a free service provided to managers and owners of ClassNK registered vessels to manage information such as survey/audit/inspection statuses for each ship, per iodic sur vey/audit/inspection items, and designated dates for sur veys/audits/inspections via the internet. The ser vice allows users to easily manage and plan surveys/audits/inspections for each vessel or their entire fleet. A “Due Date Notice E-mail Service” is also available, sending users E-mail notification of Survey/Audit/Inspection due dates.
ClassNK Archive Center is a cloud-based 24/7 service for storing and accessing various vessel plans and other detailed information related to a vessel's construction over a vessel’s lifetime. The ClassNK Archive Center helps reduce administrative costs by allowing users to manage and view stored information via the internet, greatly enhancing the eff iciency and practicality of ship management. The highly secure system protecting the data is also compliant with the IMO GBS "Ship Construction File" requirements expected to come into force in the near future, covering customers for the new regulations.
e-Product is a free service allowing users to apply for material and equipment surveys via the Internet. Users can view the status of their applications, and can easily send applications for a wide range of surveys using the application history copy function.
e-Application is a service provided free of charge allowing users to apply for class and statutory surveys, ISM/ISPS audits, and onboard MLC inspections for existing vessels as well as ISM audits for their company. The service allows users to automatically configure required surveys for each vessel or entire fleets as well as apply for surveys and audits online through ClassNK’s NK-SHIPS service. An NK-SHIPS user registration is required in order to use this service. Users can use NK-SHIPS immediately after registration.
INF
OR
MA
TIO
N S
UP
PO
RT
14
SOFTWARE & SERVICES[English]
www.classnk.com
4-7 Kioi-cho, Chiyoda-ku, Tokyo 102-8567 JapanTel: +81-3-5226-2047E-mail: [email protected]
July 2015