TOTAL SH I P CARE - ClassNK - English · ISM and ISPS Audit/ MLC Inspection +%e-Application Online Application ... based on the structure and facilities of vessels in line with SOLAS

SOFTWARE & SERVICES［English］

T O T A L

S H I P

C A R E

1 PrimeShip-HULLCareHull Maintenance Information Service

2 PrimeShip-CAPCondition Assessment Program

3 PrimeShip-OASOil Analysis Service

4 Fleet Management SupportFleet Management Support Software

5 ClassNK CMAXSMachinery Maintenance System

6 ClassNK-PEERLESSSoftware for Optimal Ballast Water Management Systems Installation

MAINTENANCE

1 PrimeShip-SHAFTShaft Alignment Analysis Program

2 PrimeShip-CRANKCrankshaft Stress Calculation Service

3 PrimeShip-TORRESShaft Torsional Vibration Analysis Service

MACHINERY

Comprehensive Software and Services for Total Ship Care

DESIGN

CONSTRUCTION

OPERATION

5 PrimeShip-CTF for PSPC Coating Technical File (CTF)Preparation Support System

1 PrimeShip-IPCAIntegrated System for Ship Performance Capability

2 PrimeShip-NAPA Manager NK-Customized Program for NAPA

3 PrimeShip-HULLRule Calculation System and Direct Strength Assessment System

4 PrimeShip-CAD InterfaceInterface Program for Data Linkage between 2D/3D CAD and Rule Calculation System

HULL

1

T O T A L S H I P C A R ESOFTWARE & SERVICES

01

1 NK-PASSElectric Plan Approval System

INFORMATION SUPPORT

3 NK-SHIPSOnline Status Information Service for Class and Statutory Survey/ISM and ISPS Audit/MLC Inspection

4 e-ApplicationOnline Application System for Surveys and Audits

5 ClassNK Archive CenterArchive Center for As-built Drawings Storage Service/ GBS-Ship Construction File Storage Service

1 PrimeShip-CHEMISYSIntegrated Database System for Chemical Products

2 PrimeShip-DG/Bulk CargoIMDG/IMSBC Loading Requirement Program

OPERATION

3 PrimeShip-ETASEmergency Technical Assistance Service

1 PrimeShip-GREEN/SRMShip Recycling Management

2 PrimeShip-GREEN/MinPowerSoftware for Assessment of Minimum Propulsion Power

ENVIRONMENT

3 PrimeShip-GREEN/ProSTASoftware for Progressive Speed Trial Analysis

2 e-ProductOnline Application Service for Survey of Material and Equipment

4 PrimeShip-GREEN/EEOIEEOI Calculation and Analysis System

5 ClassNK-NAPA GREENComprehensive Software Solution for Eco-Eff icient Operations

ClassNK develops software and services to provide comprehensive vessel support,

using vast technical experience gained over many years as a classification society.

ClassNK software and services can support vessels from design stage, through operation,

maintenance, and surveys, right up to recycling.

1

1

1

1

1

1

2

02

Contact

■Hull Department

■Hull Rules Development Department

■Survey Operations Headquarters

■NAPA Customer Service

E-mail: [email protected]




Tel: +81-3-5226-2018

Tel: +81-3-5226-2181

Tel: +81-3-5226-2027

Tel: +358-9-22-813-888

S O F T W A R E & S E R V I C E S

DES IGN

CONSTRUCTION

OPER ATION

H U L L

PrimeShip-HULLPrimeShip-HULL（Rules）/CSR Bulk Carrier

PrimeShip-CAD3D viewer

NAPASteel NAPA IPCA DXF,DWG

PrimeShip-HULL（Rules）/CSR Tanker

Interface

PrimeShip-HULL（Rules）/HCSR

XML for Ship3D XML for Performance

PrimeShip-CAD XML Schema Group

DamageStability

Calculation

LoadingManual

Stability Information

3D Model on NAPA Database Documents for Approval

CTF

Coating Technical FilePrimeShip-CTFfor PSPC

Report（Output）

Server inData Center

ShipyardUser

Access anywherein the world via Internet

Statutory Compliance Manager

1 PrimeShip-IPCA Integrated System for Ship Performance Capability

PrimeShip-NAPA Manager NK-Customized Program for NAPA2

PrimeShip-HULL Rule Calculation System and Direct Strength Assessment System3

PrimeShip-CAD Interface4 Interface Program for Data Linkage between 2D/3D CAD and Rule Calculation System

Coating Technical File (CTF)Preparation Support System PrimeShip-CTF for PSPC5

■Overall Structure of Data Linkage

Contact Hull Department

Contact Hull Department, NAPA Customer Service

Contact Hull Department or Hull Rules Development Department

Contact Hull Rules Development Department

Contact Survey Operations Headquarters

PrimeShip-IPCA is a Windows OS-based software package that calculates water displacement, trim, stability, longitudinal strength and other performance factors of a vessel during the design stage. The software allows calculations at design stage to be carried out in line with class rules, helping reduce design lead times. The software contains design software Design-IPCA and calculation sof tware for onboard loading computer sys tems Onboard-IPCA Calculation Engine, offering full support coverage during design and operation.

PrimeShip-NAPA Manager (Statutory Compliance Manager for NAPA system users) is a program offered free of charge that uses 3D vessel models created during the design stage using NAPA software to calculate stability, longitudinal strength and other factors based on class rules. The program can be used in conjunction with NAPA sof tware to create drawings for plan approval to help reduce design lead times. NAPA software is required to use this program.

PrimeShip-CAD Interface is a program provided free of charge to l ink 2D/3D CAD sof tware wi th CSR-based ru le ca lcu lat ion software. The program allows users to convert data from CAD and per formance capability calculation software for use directly with other sof tware to help prevent design errors. Pr imeShip-CAD Interface can link data between various types of software.

PrimeShip-HULL is a free software package that contains programs for rule calculation and direct strength calculation based upon structural rules. The PrimeShip-HULL (HCSR), PrimeShip-HULL (Rules) and PrimeShip-HULL (DSA) programs allow designers to perform calculations and assessments based on IACS Common Structural Rules (CSR) and ClassNK Rules to help reduce design lead times. A dedicated homepage and online support desk are available to provide users with technical support and other assistance as needed. Note: Either Patran and MSC.Nastran (not included), or HyperWorks (not included) is needed to run PrimeShip-HULL (DSA).

PrimeShip-CTF for PSPC is a cloud-based suppor t tool provided free of charge to help create coating technical f i les . With this sof tware users can compile and manage logs and data for onboard CTFs via the internet in line with the IMO Per formance Standards for Protective Coatings.

HU

LL

04

Contact

■Machinery Department

■Marine Industrial Service Department



Tel: +81-3-5226-2023

Tel: +81-3-5226-2176


DES IGN

CONSTRUCTION

OPER ATION

M AC H I N E RY

Rel

ativ

e di

spla

cem

ent

(mm

)

Rel

ativ

e di

spla

cem

ent

(mm

)

Distance from engine room bulkhead (m) Distance from engine room bulkhead (m)

Measurement

1

2 PrimeShip-CRANK Crankshaft Stress Calculation Service

3 PrimeShip-TORRES Shaft Torsional Vibration Analysis Service

PrimeShip-SHAFT Shaft Alignment Analysis Program

■Calculation Software

■Evaluation of Essential Items Relevant to Torsional Vibration

■Comprehensive Analysis Reports

■Finite Element Analysis

Contact Machinery Department


Contact Marine and Industrial Service Department or Machinery Department

Pr imeShip-SHAFT is a program provided free of charge to help des igner s comply wi th ClassNK’s Guidelines on Shaf ting Alignment and analyze shaf t alignment based on the Guidelines. Using this software, designers can easily calculate alignment in line with ClassNK rules and guidance, as well as determine the optimal position for shaft bearings.

PrimeShip-CRANK is a fee-based service that offers strength evaluations of diesel engine crankshafts in line with ClassNK and IACS rules. Users can determine if a crank shaft meets strength requirements and receive a statement of compliance through this service.

PrimeShip-TORRES is a fee-based service that analyzes shaft torsional vibration in line with ClassNK and IACS rules . Users can evaluate torsional vibration at the design stage and receive analysis reports indicating any occuring torsional vibration stress and allowable values through this service.

MA

CH

INE

RY

06

Contact

■Natural Resources and Energy Department

■Material and Equipment Department





Tel: +81-3-5226-2042

Tel: +81-3-5226-2020

Tel: +81-3-5226-2027


DES IGN

CONSTRUCTION

OPER ATION

O P E R AT I O N

List of chemical products which can be loaded

List of chemical products which cannot be loaded

Output

SEARCH

Database

List of tank structure and equipment/installations

Design data

Chemicalproducts

Chemicaltankers

Chemical products which can/cannot be loaded

Check construction and equipment details

Loadable cargo list

Particulars

Loadable cargoes

Non-loadable cargoes, Substandard items

① Input vessel particulars including construction and loading equipment information ② Results

GO TOREPAIR YARD

Occasional Survey- Confirm ship’s condition- Temporary Repair Plan- Ascertain Seaworthiness to sail to Repair Port/Yard

Successful Salvage

Salvage

ETAS Team

Stability at Damage Condition &Residual Longitudinal Strength

Report & Advice of Countermeasures

Calculation

Damage Stability

ETASAdvice

Accident

1 PrimeShip-CHEMISYS Integrated Database System for Chemical Products

3 PrimeShip-ETAS Emergency Technical Assistance Service

2 PrimeShip-DG/Bulk Cargo IMDG/IMSBC Loading Requirement Program

■24 hours a day, 365 days a year

■Overview of Design Support System　[for designers]

■Using PrimeShip-DG/Bulk Cargo

Contact Natural Resources and Energy Department

Contact Material and Equipment Department


PrimeShip-CHEMISYS is a fee-based software package offering comprehensive support for designers, owners, and managers of chemical tankers during design, construction, and operation. PrimeShip-CHEMISYS (Search & Data) allows users to select and view what type of cargoes can be car r ied by each vessel . PrimeShip-CHEMISYS (Onboard) offers support for cargo loading plans and loading operations.

PrimeShip-ETAS is fee-based vessel suppor t service offered by ClassNK to shipowners to provide assistance during accidents including but not l im i ted to g round ing , co l l i s i on , and explosions, to help ensure the safety of vessels and to protect and limit any damage to the marine environment. ClassNK ETAS works in close communication with shipowners and salvagers during marine casualties offering advice to ensure salvage operations are carried out safely with as little impact to the environment as poss ib le . The ETAS team is compr ised of experienced surveyors on hand 24/7 to provide emergency assistance.

PrimeShip-DG/Bulk Cargo is a fee-based software package that allows users to create lists of loadable cargoes (solid bulk cargoes and dangerous goods) based on the structure and facilities of vessels in line with SOLAS and the IMSBC Code. Users can easily identify which cargo types can be loaded on each type of vessel, helping expedite cargo planning. Users can also perform reverse searches to identify which type of vessel structures or facilities would be appropriate for carrying specific types of cargoes, and create a cargo vessel database to expedite cargo planning.

OP

ER

AT

ION

08

Contact

■Classification Department

■Hull Rules Development Department

■Marine Industrial Service Department


■Practical R&D Promotion Department






Tel: +81-43-294-6940

Tel: +81-3-5226-2181

Tel: +81-3-5226-2176

Tel: +81-3-5226-2027

Tel: +81-3-5226-2025


DES IGN

CONSTRUCTION

OPER ATION

M A I N T E N A N C E

CMAXS cloud database

CMAXS cloud database

Color-coded graph of measured points

Measurement record table

Highlighted cells show substantially corroded parts

FMS Ship Monitoring

Provide Services

Orders

FMS Due Date Management

Ship Management Company

Information Exchangevia Internet

Makers

Service Engineers ClassNK Flag State

Combustion test using FIA-100FCA （Standard: IP541/06）

SynchronizedSynchronizedPlanned maintenance managementSpare parts inventory managementCondition diagnosis data

Planned maintenance managementSpare parts inventory managementCondition diagnosis data

Shipping companyShip management

company

Shipping companyShip management

company

EquipmentmanufacturerEquipment

manufacturerNKNK CrewCrew CrewCrew CrewCrew

Maintenanceapplications managementand condition diagnosis

Maintenanceapplications managementand condition diagnosis

Onboard LAN systemOnboard LAN system

SynchronizedSynchronizedPlanned maintenance managementSpare parts inventory managementCondition diagnosis data

Planned maintenance managementSpare parts inventory managementCondition diagnosis data

InternetInternet

1 PrimeShip-HULLCare Hull Maintenance Information Service

PrimeShip-CAP Condition Assessment Program2

PrimeShip-OAS Oil Analysis Service3

Fleet Management Support Fleet Management Support Software4

ClassNK CMAXS5

ClassNK-PEERLESS 6 Software for Optimal Ballast Water Management Systems Installation

Machinery Maintenance System

■PrimeShip-HULLCare/2D internet

■Fuel Oil Analysis

■Sample for Rating

■System Concept

■PrimeShip-HULLCare/3D Model　(Optional service)

Contact Marine and Industrial Service Department

Contact 2D: Classification Department / 3D: Hull Rules Development Department




Contact Practical R&D Promotion Department

PrimeShip-HULLCare is a service that compiles and categorizes survey data collected from across ClassNK’s global service network to provide hull maintenance information for each vessel registered for the Enhanced Survey Program scheme. Users can verify the history of the hull condition for each of its vessels, and create an appropriate maintenance management plan. PrimeShip-HULLCare is an internet based service, which allows users access 24/7 from anywhere in the world. In addition, an optional fee-based service for 3D models is also available.

PrimeShip-CAP (Condition Assessment Program) is a fee-based service that allows users to assess and verify whether hull conditions meet or exceed class rules and international regulations. Users can obtain a 1 (highest) to 4 (lowest) grade of their hull condition based on onboard surveys, as well as receive comprehensive reports and certificates through this service. Hulls awarded condition levels of grade 2 and above rank very highly, verifying maintenance conditions are satisfactory, which is particularly useful for chartered vessels.

ClassNK’s Fleet Management Support is a program provided free of charge to help users manage their NK-classed vessels. This software works in conjunction with the classed vessel and ISM/ISPS online information service NK-SHIPS, allowing users to conf irm the status of any required surveys, audits or certif ications, to easily manage vessel maintenance.

PrimeShip-OAS is a fee-based fuel oil and stern tube lubricant analysis service. The service offers fuel oil analysis based on ISO and J IS standards, and lubr icant analysis as par t of propeller shaf t condition monitoring, allowing users to more effectively manage and maintain their vessels.

ClassNK CMAXS is fee-based cloud system offer ing users sof tware and services to support onboard machinery maintenance and monitoring. The system uses data collected by sensors installed onboard vessels for the early detection of abnormalities and condition monitoring for machinery. Additionally, the system shows onboard machinery maintenance plans and allows users to input the results of maintenance work via a user-fr iendly interface. The data is stored on a cloud system, allowing all relevant users access to the information anytime from anywhere in the world.

ClassNK-PEERLESS is a fee-based software program that allows users to dramatically shorten the design process for installing ballast water management systems on existing vessels. Factors such as lack of engine room space and complicated piping make installing ballast water management systems on existing vessels a difficult process. ClassNK-PEERLESS uses data gathered from 3D laser scanners to create highly accurate 3D models, greatly simplifying the process to cut down on design lead times.

MA

INT

EN

AN

CE

10

Contact

■Ship Recycling Team

■EEDI Department

■Marine and Industrial Service Department

■NAPA





Tel: +81-3-5226-2058

Tel: +81-3-5226-2176

Tel: +358-9-22-813-1


DES IGN

CONSTRUCTION

OPER ATION

E N V I RO N M E N T

Supplier

Shipbuilder

Apply / Approve

Transfer the Ship Data

NK

Shipowner

SDoC

Ship Info.

MD

MDPurchase List

MD Library

Ship Location Info. IHMLocation

【 Ship 】

Request / Respond （Acting Registration）

Speed correction for wind, waves, current, shallow water,

displacement,water temperature and

water density

Vrefの算出

1 PrimeShip-GREEN/SRM

PrimeShip-GREEN/MinPower2

PrimeShip-GREEN/ProSTA Software for Progressive Speed Trial Analysis3

PrimeShip-GREEN/EEOI4

ClassNK-NAPA GREEN5

Ship Recycling Management

EEOI Calculation and Analysis System

Comprehensive Software Solution for Eco-Efficient Operations

Software for Assessment of Minimum Propulsion Power

■Concept

■Analysis of Calculation Results

■Estimation of Reference Ship Speed （Vref） for EEDI

Contact Ship Recycling Team

Contact EEDI Department



Contact Marine and Industrial Service Department, NAPA

PrimeShip-GREEN/SRM is a web-based system offering suppor t to the industry for the Ship Recycling Convention. The system is provided free of charge to shipbuilders and suppliers. Pr imeShip-GREEN/SRM facil i tates information exchange between shipbuilders , shipping companies and suppliers at the development and maintenance of Inventory of Hazardous Materials (IHM: list indicating quantity & location of hazardous materials on board) generating IHM automatically with minimum additional input, drastically reducing the burden on the industry.

PrimeShip-GREEN/MinPower is a program provided free of charge to help users assess the minimum propulsion power for bulk carriers, tankers or combination carriers in adverse weather conditions in accordance with IMO regulations. The sof tware allows users to easily assess the minimum propulsion power taking into account factors such as added resistance in irregular waves, and automatically create graphs for class approval, helping to greatly reduce design lead times.

PrimeShip-GREEN/EEOI is a free software package that allows users to evaluate GHG (CO2) emission levels during operation, enabling users to calculate and analyze their Energy Eff iciency Operational Indicator (EEOI). The software gives users an understanding of the energy eff iciency of a vessel during operation, allowing for operation-specific vessel analysis and management.

PrimeShip-GREEN/ProSTA is a free program that allows users to analyze ship speed correction at progressive speed trials taking into account factors such as wind , cur rent , wave , sha l low water, d isplacement , water temperature and water density in compliance with ISO 15016:2015. The software allows users to easily analyze the speed cor rec t ion a t progress i ve speed t r ia l s , and automatically creates graphs for class approval, helping to greatly reduce design lead times.

ClassNK-NAPA GREEN is an advanced shipping solution for eco-eff icient operations. It increases f leet ef f iciency by providing improved transparency, per formance evaluation and dynamic optimization tools for route, speed and trim resulting in safe and efficient voyage execution.

EN

VIR

ON

ME

NT

12

Contact

■Hull Department

■Information Technology Department

■Machinery Department

■Information Service Department

■Classification Department


■Safety Management Systems Department

■NK Archive Center Project Team









Tel: +81-3-5226-2017

Tel: +81-43-294-5467

Tel: +81-3-5226-2023

Tel: +81-43-294-5451

Tel: +81-43-294-5797

Tel: +81-3-5226-2027

Tel: +81-3-5226-2173


DES IGN

CONSTRUCTION

OPER ATION

I N F O R M AT I O NS U P P O RT

ExamineePlans

Examine plansand

input comments

Notify completionof examination by e-mail

Submit printed plans

Shipbuilder,Manufacturer,Ship Designer

etc.

SendePlans

Downloadapproved ePlans,

Refer to comments

1 NK-PASS Electric Plan Approval System

3

e-Application Online Application System for Surveys and Audits4

ClassNK Archive Center5

e-Product 2

NK-SHIPS

Online Application Service for Survey of Material and Equipment

Online Status Information Service for Class and Statutory Survey/ISM and ISPS Audit/MLC Inspection

Archive Center for As-built Drawings Storage Service/GBS-Ship Construction File Storage Service

■Ship Survey Records　and Survey History

■Online Application Window 　for Surveys and Audits ■Link with NK-SHIPS

Contact Hull Department or Information Technology Department


Contact Where to apply: Information Service Department / Inquiries for the Service & Operation: Classification Department or Safety Management Systems Department

Contact Where to apply: Information Service Department / Inquiries for the Service & Operation: Survey Operations Headquarters or Safety Management Systems Department

Contact Archive Center Project Team

NK-PASS is a free ser vice that allows shipyards , equipment manufacturers and designers to replace printed plans and drawings with electronic versions that can be submitted for class approval and returned electronically. Users can confirm the status of submit ted drawings and approval results in real time via the internet , greatly reducing the time and costs associated with approval (such binding, postage, etc.), allowing users to manage their plans and drawings more ef f iciently. The optional NK-PASS EDI (Exchange Data Inter face) service is a standard inter face linked to customer’s own system that allows users to exchange electronic drawings between NK-PASS and the customer’s system.

NK-SHIPS is a free service provided to managers and owners of ClassNK registered vessels to manage information such as survey/audit/inspection statuses for each ship, per iodic sur vey/audit/inspection items, and designated dates for sur veys/audits/inspections via the internet. The ser vice allows users to easily manage and plan surveys/audits/inspections for each vessel or their entire fleet. A “Due Date Notice E-mail Service” is also available, sending users E-mail notification of Survey/Audit/Inspection due dates.

ClassNK Archive Center is a cloud-based 24/7 service for storing and accessing various vessel plans and other detailed information related to a vessel's construction over a vessel’s lifetime. The ClassNK Archive Center helps reduce administrative costs by allowing users to manage and view stored information via the internet, greatly enhancing the eff iciency and practicality of ship management. The highly secure system protecting the data is also compliant with the IMO GBS "Ship Construction File" requirements expected to come into force in the near future, covering customers for the new regulations.

e-Product is a free service allowing users to apply for material and equipment surveys via the Internet. Users can view the status of their applications, and can easily send applications for a wide range of surveys using the application history copy function.

e-Application is a service provided free of charge allowing users to apply for class and statutory surveys, ISM/ISPS audits, and onboard MLC inspections for existing vessels as well as ISM audits for their company. The service allows users to automatically configure required surveys for each vessel or entire fleets as well as apply for surveys and audits online through ClassNK’s NK-SHIPS service. An NK-SHIPS user registration is required in order to use this service. Users can use NK-SHIPS immediately after registration.

INF

OR

MA

TIO

N S

UP

PO

RT

14

SOFTWARE & SERVICES［English］

www.classnk.com

4-7 Kioi-cho, Chiyoda-ku, Tokyo 102-8567 JapanTel: +81-3-5226-2047E-mail: [email protected]

July 2015