Price List 7
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
SPRAYING ACCESORIES
IDK and ID nozzles offer air induction technology for excellent coverage particularly in drift prone applications. Available in a range of ISO sizes they provide droplet spectrums from medium to coarse / very coarse.
IDK and ID NOZZLES
noitpircseD ledoM
IDK 01 IDK 120 Degree 01 Air Induction Tip
IDK 015 IDK 120 Degree 015 Air Induction Tip
IDK 02 IDK 120 Degree 02 Air Induction Tip
IDK 025 IDK 120 Degree 025 Air Induction Tip
IDK 03 IDK 120 Degree 03 Air Induction Tip
IDK 04 IDK 120 Degree 04 Air Induction Tip
Adapter suits HARDI nozzle bodies allowing fitment of most nozzles / caps.
ledoM
9950-0024 Hardi adapter
FLAT FAN NOZZLES The Flat Fan Tip is a 110 degree general spray tip that produces a mixed droplet spectrum over the 30-60 PSI operational pressure range
Model Description List Model Description
30-01F110OR FLAT FAN 01 1.50 30-01F110LL FLAT FAN 025
30-01F110RG FLAT FAN 015 1.50 30-01F110LB FLAT FAN 03
30-01F110YE FLAT FAN 02 1.50 30-01F110RE FLAT FAN 04
GUARDIAN AIR TIP AND CAP The Hypro GuardianAIR is the only spray tip with a pattern and droplet size scientifically designed to maximize coverage and productivity at low spray rates. This technology was originally developed by Hypro for the Syn-genta Amistar nozzle and has been proven on millions of acres around the world. GuardianAIR spray tips boost productivity, control, and profitability using a patented combination of innovations. They are air-induced to
reduce drift and boost on-target spray deposition, yet are tuned to provide more droplets per gallon than any comparable air induced tip. Those coverage-boosting droplets are delivered at an optimized incline that provides more uniform coverage on the entire plant, front and back. Comes complete with cap and gasket.
Model Description List Model Description
FC-GA110-015 Guardian Air 01 13.75 30-01F110LL FC-GA110-025
FC-GA110-015 Guardian Air 015 13.75 30-01F110LB FC-GA110-03
FC-GA110-015 Guardian Air 02 13.75 30-01F110RE FC-GA110-04
UNIVERSAL SPRAY TIP CAP Streamlines spray tip inventory. Allows the use of several varieties of spray tips. Dual positive aligning fingers keep spray tips secure.
noitpircseD ledoM
402990-1 Universal Spray Tip Cap (Black)
HARDI ADAPTER
Price List 9
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in effect at the time of shipment will apply. All prices quoted are exclusive of GST.
SERIES 9200 SELF PRIMING PEDESTAL MODEL
CENTRIFUGAL PUMPS
xaM paC xaM noitpircseD ledoMPress In
Out
9006C CAST IRON W/1 3/8” 540 RPM HUB AND LOCKING COLLAR KIT (6 SPLINE)
442 LPM 5 bar 1 1/2” 1 1/4”
9008C CAST IRON W/1 3/8” 1000 RPM HUB AND LOCKING COLLAR KIT (21 SPLINE)
9028C CAST IRON W/1 3/4” 1000 RPM HUB AND LOCKING COLLAR KIT (20 SPLINE)
435 LPM 4.2 bar 1 1/2” 1 1/4”
SERIES 9000 GEAR DRIVEN PUMPS
xaM noitpircseD ledoMCap
Max Press
9203C PEDESTAL CENTRIFUGAL 530 LPM 11 bar 1 1/2” 1 1/4”
9203C-R PEDESTAL CENTRIFUGAL REVERSE RO-TATION (SUIT MOST SPRAY COUPE)
9206S PED. CENTRIFUGAL S/STEEL L/G SEAL 856 LPM 5.5 bar 2” 1 1/2”
9203S-R CENTRIFUGAL REVERSE ROTATION STAINLESS STEEL/LIFEGUARD SEALS
9203S PEDESTAL CENTRIFUGAL STAINLESS 530 LPM 11 bar 1 1/2” 1 1/4”
SERIES 9200 PEDESTAL MODELS CAST & S/STEEL
tuO nI sserP xaM paC xaM noitpircseD ledoM
9263C-C CENTRIFUGAL C/W 12 V CLUTCH 530 LPM 8 bar 1 1/2” 1 1/4”
9263S-CR CENTRIFUGAL (STAINLESS) C/W 12 V CLUTCH REVERSE ROTATION
530 LPM 8 bar 1 1/2” 1 1/4”
9263C-CR CENTRIFUGAL C/W 12 V CLUTCH REVERSE ROTATION
xaM noitpircseD ledoMCap
Max Press In
Out
9203C-SP CENTRIFUGAL w/ SELF PRIME CHAMBER 462 LPM 10 bar 1 1/2” 1 1/4”
9203C-R-SP CENTRIFUGAL w/ SELF PRIME CHAMBER REVERSE ROTATION
9205C-BSP CENTRIFUGAL w/ SELF PRIME CHAMBER 617 LPM 8 bar 2” 2”
xaM noitpircseD ledoMCap
Max Press In
Out
9203P-S PEDESTAL CENTRIFUGAL 386 LPM 5.5 bar 1 1/2” 1 1/4”
9303P-HM5C CENTRIFUGAL HYDRAULIC DRIVE HM5 428 LPM 7.5 bar 1 1/2” 1 1/4”
9303P-HM2C CENTRIFUGAL HYDRAULIC DRIVE HM2 302 LPM 5.5 bar 1 1/2” 1 1/4”
SERIES 9200 PEDESTAL MODELS—12 VOLT CLUTCH
POLYPROPYLENE PEDESTAL AND HYDRAULIC DRIVE
Model 9006C
Model 9203P
Model 9203C-SP
Model 9263C-C
Model 9203C
Model 9206S
Price List 10
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
SERIES 9000 CAST IRON HYDRAULICALLY DRIVEN
LifeGuard seals
CENTRIFUGAL PUMPS
xaM paC xaM noitpircseD ledoMPress In
Out
9303C-HM2C HYD. DRIVEN PUMP (OIL FLOW 15-22 LPM) 356 LPM 5.5 bar 1 1/2” 1 1/4”
9303C-HM1C HYD. DRIVEN PUMP (OIL FLOW 41-49 LPM) 424 LPM 8.2 bar 1 1/2” 1 1/4”
9303C-HM3C HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 473 LPM 5.5 bar 1 1/2” 1 1/4”
9304C-HM5C HYD. DRIVEN PUMP (OIL FLOW 49-60 LPM) 760 LPM 6.2 bar 2” 1 1/2”
9305C-HM3C HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 685 LPM 12.4 bar
9306C-HM1C HYD. DRIVEN PUMP (OIL FLOW 41-49 LPM) 784 LPM 8.2 bar 2” 1 1/2”
9306C-HM3C HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 810 LPM 9 bar 2” 1 1/2”
HYPRO hydraulically driven centrifugal pumps are widely adaptable for a range of spraying and industrial re-quirements. They are suitable for use with both open and closed tractor hydraulic systems and a range of motor options are available to ensure the pump suits your hydraulic system. Hypro has a detailed hydraulic selection guide (Form 270) to help in correct pump selection. Hypro recommends the use of a free return to tank system on the hydraulic return line to minimize back pressure to the hydraulic motor. Pumps come standard with an hydraulic non return valve and bypass adjustment screw as well as a comprehensive installation manual.
xaM paC xaM noitpircseD ledoMPress In
Out
9303S-HM2C HYD. DRIVEN PUMP (OIL FLOW 15-22 LPM) 365 LPM 5.5 bar 1 1/2” 1 1/4”
9306S-HM1C HYD. DRIVEN PUMP (OIL FLOW 41-49 LPM) 784 LPM 8.2 bar 2” 1 1/2”
9306S-HM3C HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 810 LPM 9 bar 2” 1 1/2”
9303S-HM1C HYD. DRIVEN PUMP (OIL FLOW 41-49 LPM) 424 LPM 8.3 bar 1 1/2” 1 1/4”
SERIES 9000 STAINLESS STEEL HYDRAULICALLY DRIVEN HYPRO stainless steel centrifugal pumps are made with 316 stainless steel casings for improved durability and tremendous resistance to aggressive solutions. HYPRO stainless steel pumps are fitted standard with HYPRO LIFEGUARD seals which are silicon carbide based and possess 21 times the dry run survivability of standard seals and 8 times the life in abrasive solutions when compared to standard seals.
Series 9306S
Series 9306C
Series 9303C
Series 9307C
Price List 11
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
SERIES 2100 VERSA TWIN
CENTRIFUGAL PUMPS
SERIES 9000 SELF PRIMING CAST IRON & STAINLESS STEEL
xaM paC xaM noitpircseD ledoMPress In
Out
9303C-HM2C SP HYD. DRIVEN PUMP (OIL FLOW 15-22 LPM) 370 LPM 4.8 bar 1 1/2” 1 1/4”
9303C-HM4C SP HYD. DRIVEN PUMP (OIL FLOW 19-26 LPM) 363 LPM 5.5 bar 1 1/2” 1 1/4”
9303C-HM1C SP HYD. DRIVEN PUMP (OIL FLOW 41-49 LPM) 460 LPM 7.6 bar 1 1/2” 1 1/4”
9305C-HM3C SP HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 650 LPM 9.6 bar 2” 2”
xaM paC xaM noitpircseD ledoMPress
9600C TURBINE PUMP FOR PTO 1000 RPM 1 1/2” PORTS 246 LPM 6.9 bar
ENILPS 12 ”8/3 1 RELPUOC OTP 8700-0231
3430-0346 TORQUE ARM AND CHAIN
SERIES 9200 TURBINE PUMP
xaM paC xaM noitpircseD ledoMPress
2150P-D35DC DIAPHRAGM PUMP 12 volt MOTOR DRIVEN 27 LPM 8 BAR
2120P-P05-EU PLUNGER PUMP 230 volt MOTOR DRIVEN 9.5 LPM 20 BAR
Model 9200
Versa Twin
Model 9000 SP
The Versa Twin series is available in both diaphragm (med. press.) and plunger (hi press.) pump configurations and in both 12 volt and 240 volt motor driven. Suitable for a range of agricultural and industrial applications.
Price List 12
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
ROVATTI GEARBOX DRIVE CENTRIFUGAL IRRIGA-TION PUMPS FOR 540 R.P.M PTO DRIVE
IMOVILLI DIAPHRAGM PUMPS
D113
MINI
M30 / M50
D82
M73
Model Max Flow @
540 RPM Press
MINI 18 LPM 25 bar
M30 33 LPM 30 bar
M50 50 LPM 40 bar
M73 70 LPM 50 bar
teltuO / telnI ecnamrofreP ledoM
T1-40 UP TO 44 G.P.M AT 340 FT HEAD (200 LPM) 65mm x40mm
UP TO 130 G.P.M AT 300 FT HEAD (590 LPM)
D Series pumps do not include integrated control units
All M series pumps come standard with an integrated control unit.
Model Max Flow @ Max
540 RPM Press
D82 79.LPM 20 bar
D113 110 LPM 20 bar
With water cooled gearbox
2741.50
Price List 13
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
1 3350-0079A 1/4” F & 1/2” M 40 SS Polypropylene Buna-N
1 3350-0046A 1/2” F 40 SS Polypropylene Buna-N
1 3350-0034A 3/4” F 40 SS Polypropylene Buna-N
1 3350-0058A 1”F 40 SS Polypropylene Buna-N
1 3350-0072A 1 1/4”F 40 SS Polypropylene Buna-N
1 3350-0113A 1 1/2” F 40 SS Polypropylene Buna-N
2 3350-0046 1/2” F 40 SS Type 6 Nylon Buna-N
2 3350-0034 3/4” F 40 SS Type 6 Nylon Buna-N
2 3350-0058 1”F 40 SS Type 6 Nylon Buna-N
2 3350-0072 1 1/4”F 40 SS Type 6 Nylon Buna-N
2 3350-0113 1 1/2” F 40 SS Type 6 Nylon Buna-N
3 3350-0118 1 1/2 “F 20 SS Polypropylene EPDM
3 3350-0120 1 1/2 “F 80 SS Polypropylene EPDM
3 3350-0122 2“F 40 SS Polypropylene EPDM
LINE STRAINERS
3
5
SUCTION STRAINERS Ref Model Size Mesh Materi
4 3350-0032 3/4” hose barb 50 Nylon 3/4 hose
5 3350-0022 1/4 ID 50 Stainless 1/4 “ ID tube
4
5
1
2
WITH OPTIONAL CLEAR BOWL
All 3350 nylon strainers are 150 PSI rated. All 3350 polypropylene models are rated at 80 PSI. Ref No. 2 line strainers are also available with 20 mesh screen. Prices are the same as 40 mesh models. For clear bowls add $25 for 1/2” and 3/4” models and $50 for 1”, 1 1/4” and 1 1/2” models
3
Price List 14
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
RELIEF VALVES
SUCTION STRAINER S.S SCREEN
REGULATOR—HIGH PRESSURE
R30-14 25mm 80 S.S 1/4” F
R30-38 35mm 80 S.S 3/8” F
R30-12 45mm 80 S.S 1/2” F
R30-34 45mm 80 S.S 3/4” F
R30-100 80mm 80 S.S 1” F
R30-112 80mm 80 S.S 1 1/2” F
JET AGITATORS
1 3371 7.2-30 24-70 3/4”
2 3371-0019 7.9-51 22-76 3/4”
3 3371-0028 10– 90 30-400 3/4”
Ideal for centrifugal pumps. Increases output flow for thorough agitation. Comes with multiple orifice plates to meter flow for optimal pump performance. Provides multi directional agitation.
1
3
2
1 3300-0002 1/2” Bronze S.S ball 200 PSI
1 3300-0001 3/4” Bronze S.S ball 400 PSI
1 3316-0002 1 1/4” Cast Iron S.S cone 200 PSI
2 3300-0015 3/4” Nylon Nylon 150 PSI
2 3300-0016 3/4” Nylon Nylon 250 PSI
noitpircseD daerhT ledoM feR
3 3300-0084 3/8” Balanced pressure 200-2000 PSI. Provides smooth constant pressure regulation
3
2
1
Price List 15
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
UNLOADER VALVES
PRESSURE GAUGES GLYCERINE FILLED
Model Diameter Pressure range Stem Size
2650-0001 2.5” 0-30 psi, 0-2 bar 1/4” M
2650-0002 2.5” 0-60 psi, 0-4 bar 1/4” M
2650-0003 2.5” 0-100 psi, 0-7 bar 1/4” M
2650-0004 2.5” 0-200 psi, 0-14 bar 1/4” M
2650-0005 2.5” 0-300 psi, 0-20 bar 1/4” M
2650-0006 2.5” 0-600 psi, 0-40 bar 1/4” M
2650-0007 2.5” 0-1000 psi, 0–70 bar 1/4” M
2650-0008 2.5” 0-2000 psi, 0–140 bar 1/4” M
2650-0009 2.5” 0-3000 psi, 0–200 bar 1/4” M
2650-0010 2.5” 0-5000 psi, 0–350 bar 1/4” M
Ref Model Thread Capacity Unloading range
6 3390-0006 1/2” 5 G.P.M 200-500 PSI
6 3390-0037 1/2” 6 G.P.M 300-1000 PSI
7 3390-0051 3/4” 15 G.P.M 100-1500 PSI
8 3390-0067 3/8” 5 G.P.M 200-600 PSI
8 3390-0063 3/8” 5 G.P.M 200-1000 PSI
9 3390-0081 3/8” 7 G.P.M 200-3600 PSI
10 3390-0079 3/8” 7 G.P.M 200-2000 PSI
2650 Bottom mount
2660 Bottom mount
2670 Rear mount
Model Diameter Pressure range Stem Size
2660-0002 4” 0-60 psi, 0-4 bar 1/4” M
2660-0003 4” 0-100 psi, 0-7 bar 1/4” M
2660-0004 4” 0-200 psi, 0-14 bar 1/4” M
Model Diameter Pressure range Stem Size
2670-0003 4” 0-100 psi, 0-7 bar 1/4” M
2670-0004 4” 0-200 psi, 0-14 bar 1/4” M
Glycerine filled pressure gauges with stainless steel cases. Dual Bar / PSI scale available in both bottom and rear mount types.
01 68
7
6
Price List 16
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
HYPRO ACCESORIES
VAC-ON VACUUM SWITCH
Gives run dry protection in by sensing loss of vacuum in suction line and switching off electrical connection. Easily reset. Can be used with both electric and combustion type motors.
ledoM
2510-0001
Cut out pressure
0.3 bar
FOAM MARKER COMPRESSORS 12 VOLT
ledoM
Black Top compressors
Thomas 107CDC-20-194
Thomas 415CDC
Thomas 327CDC56-194
Thomas 910CDC22/12-194
ledoM
FME Single Sided economy marker
FMS Single Sided marker
FMD Double sided marker
For all marking uses including spraying fertilizing etc. Economy model has switch on compres-sor. Others have control box for cabin mounting. For booms to 12 metres
FOAM MARKERS
FLOW METER 9 VOLT High performing flow meters with digital readout. Powered by a single 9 volt battery for portability and convenience.
etar wolF ledoM
Pony Flow 1.5 inch 25-350 litres per min.
.nim rep sertil 057-07 hcni 2 wolF ynoP
TITAN 12 V RETRACTABLE HOSE REEL
ledoM
Titan Reel
Optional Hose Guide
Titan 12 volt retractable hose reels are made in the USA. With a heavy duty 12 volt motor and push button control the Titan reel is suitable for up to 100 metres of 1/2 inch hose or 100 m plus of nylon hose. Ideal for weed control units, pest control etc.
Heavy duty aluminium frame
Nickel plated swivel with ball bearing support, grease fitting and chain guard
Switch and solenoid are mounted on a stainless steel plate and wired to 12 volt electric motor Stainless steel discs, PVC spool. Plated steel hardware. Carbon steel mani-fold
Titan 12 volt hose reel c/w optional hose guide
Price List 17
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
SPRAY CONTROL VALVES
Model Outlets Pressure Flow LPM
CD 6 3 50 bar 80
CD 7 4 20 bar 200
CD 10 3 50 bar 110
erusserP ledoM feR
1 SPOTSPRAY 120 Lance ideal for Flojet 10 bar
2 VARISPRAY 600 Variable pattern 42 bar
3 TURBO 400 Variable pattern 82 bar
rab 22 NUGDNAH LOTSIP 4
5 TRIGGER LANCE 8 bar
All control valves come standard with pressure gauge, and multiple outlets. Ideal for a range of roller, piston and diaphragm pumps.
PULSATION DAMPER
Model
3375-0003
3375-0017-2
Port
1/2 M
1/2 F
Capacity
10 GPM
6 GPM
Max PSI
500
1000
2
4
3 1
SPRAY GUNS
CD 6
CD7
CD10
4
5
Price List 18
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
NYLON FITTINGS
ELBOW MALE TAPER THREAD AND HOSE BARB
EL18316 1/8 3/16
EL18516 1/8 5/16
EL14316 1/4 3/16
EL14516 1/4 5/16
EL1412 1/4 1/2
EL38516 3/8 5/16
EL3812 3/8 1/2
EL1238 1/2 3/8
EL1234 1/2 3/4
EL3414 3/4 1/4
EL3412 3/4 1/2
EL34 3/4 3/4
EL1012 1 1/2
EL100 1 1
EL1141 1 1/4 1
EL114112 1 1/4 1 1/2
EL200 2 2
ELBOW HOSE BARB
EL14HB 1/4 x 1/4
EL1214HB 1/2 x 1/4
EL12HB 1/2 x 1/2
EL34HB 3/4 x 3/4
EL114HB 1 1/4 x 1 1/4
EL200HB 2 x 2
STREET ELBOW FEMALE TAPER THREAD BY MALE TAPER THREAD
SE14 1/4 x 1/4
SE34 3/4 x 3/4
SE114 1 1/4 x 1 1/4
SE200 2 x 2
LL12 1/2 x 1/2
LL100 1 x 1
LL112 1 1/2 x 1 1/2
EL3812F 3/8 x 1/2
EL34F 3/4 x 3/4
ELBOW FEMALE TAPER PIPE THREAD
ELBOW FEMALE TAPER THREAD BY HOSE BARB
Nylon fittings are made from grade 6 nylon and are suitable for a range of solutions including ag chemicals, ammonia, detergents, diesel, gaso-line, ethanol, sodium compounds and zinc sulphate.
Price List
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST. NYLON FITTINGS
INSERT TEE’S THREE HOSE BARBS
TEE THREADED MALE
PART NO BARB SIZE 1 2
T18 1/8 1/8 T14 1/4 1/4 T1438 1/4 3/8 T38 3/8 3/8 T3812 3/8 1/2 T1238 1/2 3/8 T12 1/2 1/2 T58 5/8 5/8 T3412 3/4 1/2 T34 3/4 3/4 T100 1 1 T114 1 1/4 1 1/4 T112 1 1/2 1 1/2 T200 2 2
PART NO THREAD
R12 1/2 x 1/2 x 1/2
PART NO THREAD
TT12 1/2 x 1/2 x 1/2 TT34 3/4 x 3/4 x 3/4 TT100 1 x 1 x 1 TT114 1 1/4 TT112 1 1/2 TT200 2 x 2 x 2
TEE THREADED FEMALE
19
TEE’S FEMALE THREAD WITH 1/4 INCH GAUGE PORT
PART NO. THREAD GT1214 1/2x1/2x1/2 GT3414 3/4x3/4x3/4
PART NO BARB
T1814T 1/4 4/1 T41T
T1438T 3/8 2/1 T2141T
T3814T 1/4 8/3 T83T
T3812T 1/2 8/3 T8321T
T12T 1/2 4/3 T43T
T3412T 1/2
THREAD
1/8 1/4 1/4 1/4
3/8 3/8 3/8 1/2 1/2 3/4 3/4
T3410T 3/4 1
HOSE BARB FOR B100& B35 NUTS NB C100 FITS B100 ONLY
HEX. NUT ADAPTS TO C SERIES HOSE BARBS
PART NO. THREAD
B35 3/4 F B100 1F
PART NO THREAD
C14 1/4 C38 3/8 C12 1/2 C58 5/8 C34 3/4 C100 1
TEE’S MALE TAPER THREAD AND HOSE BARBS
1
2 2
Price List 20
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
NYLON FITTINGS
MALE TAPER THREAD AND HOSE BARB
A18316 1/8 3/16
A18516 1/8 5/16
A14316 1/4 3/16
A14516 1/4 5/16
A1412 1/4 1/2
A38516 3/8 5/16
A3812 3/8 1/2
A1214 1/2 1/4
A12 1/2 1/2
A1234 1/2 3/4
A3414 3/4 1/4
A3412 3/4 1/2
A34 3/4 3/4
A1034 1 3/4
A10114 1 1 1/4
A1141 1 1/4 1
A114112 1 1/4 1 1/2
A112 1 1/2 1 1/2
FEMALE TA-PER THREAD AND SLIP ON HOSE BARB
Q14 1/4 2/1 21Q
THREAD
1/4 1/2
STANDARD HOSE MEND-ERS
SHM18 1/8
SHM14 1/4
SHM38 3/8
SHM34 3/4 1 001MHS
SHM1238 3/8 2/1 21MHS
SHM1258 5/8 8/5 85MHS
SHM114 1 1/4
SHM200 2
THREAD 1/8 1/4 1/4 3/8 3/8 1/2 1/2 1/2 1/2 5/8 3/4 1
1 1/4 1 1/2
2
F18 1/8
F38 3/8
F34 3/4
F200 2
F114 1 1/4
BRAB ON TRAP
AF14 1/4 4/1 8341FA
AF38 3/8 2/1 21FA
AF34 3/4
1/4 3/8 3/8 1/2 3/4
HEX PLUGS WITH MALE TAPER THREADS FEMALE TA-
PER THREAD WITH HOSE BARB
Price List 21
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST. NYLON FITTINGS
REDUCER BUSHINGS
REDUCER NIPPLES MALE TAPER THREAD
COUPLERS FEMALE TAPER THREAD
NIPPLE MALE TAPER THREAD
RB3818 3/8 8/3 4183BR
RB1214 1/2 2/1 8321BR
RB3418 3/4
RB11434 1 1/4
RB11234 1 1/2
RB112114 1 1/2 2 43002BR
RB200100 2 2 411002BR
RB200112 2
THREAD
1/8 1/4 1/4 3/8 1/8
3/4 1
3/4 1
1 1/4 3/4 1
1 1/4 1 1/2
RB3438 3/4 3/8
RB1012 1 1/2
M18 1/8 1/8
M38 3/8 3/8
M34 3/4 3/4
M114 1 1/4 1 1/4
M200 2 2
M1418 1/4 x 1/8
M3814 3/8 x 1/4
M1214 1/2 x 1/4
M3438 3/4 x 3/8
FC12 1/2 x 1/2
FC100 1 x 1
FC112 1 1/2 x 1 1/2
NYLON FITTINGS are suitable for pressures to 10 bar (150 PSI). At low pressure fittings may be used at tem-peratures to 80 degree Celsius.
NYLON has good resistance to a broad range of chemicals including most agricultural chemicals, ammonium compounds, detergents, diesel fuel, gasoline, ethanol, hexane, magnesium sulphate, most sodium com-pounds, trichloroethylene and zinc sulphate. NYLON FITTINGS should not be used with acid based fertilizers, bromine, chlorine, fluorine, hydrochloric acid, nitric acid, phosphoric acid, sulphuric acid, iodine and xylene.
Price List 22
PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.
NYLON FITTINGS
NOZZLE BODY ELBOW LOCK NUT INCLUDED
NTL38 1 1/16 3/8
NOZZLE BODY TEE LOCK NUT INCLUDED
NTT38 3/8 2/1 21TTN
THREAD
1 1/16 1 1/16
BC34R 3/4” BOOM CLAMP ROUND
BC100 1” BOOM CLAMP SQUARE
BOOM CLAMP ASSEMBLY BOOM CLAMPS WILL ADAPT TO ALL NOZ-ZLE BODY FITTINGS TUBE AND WILL CLAMP TO EI-THER ROUND OR SQUARE TUBE BOOMS.
STRAIGHT NOZZLE BODY WITH HOSE BARB LOCK NUT INCLUDED
3838D 1 1/16 3/8 T38C 1 1/16 3/8
NOZZLE BODY NIPPLE
NB1614 1 1/16 1/4
NOZZLE BODY NUT AND CAP NUT
8027 1 1/16
BALL CHECK VALVE ASSEMBLY
NBC10 11/16 MX 11/16 F
NOZZLE BODY CROSS LOCK NUT INCLUDED
8027
16.70