Price List Draft RGD Jan 1 2009 - RGD Corporation · DRIVEN PUMP (OIL FLOW 41-49 LPM) 460 LPM 7.6 bar 1 1/2” 1 1/4” 9305C-HM3C SP HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 650 LPM

INDEX

16

Price List 7

PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST.

SPRAYING ACCESORIES

IDK and ID nozzles offer air induction technology for excellent coverage particularly in drift prone applications. Available in a range of ISO sizes they provide droplet spectrums from medium to coarse / very coarse.

IDK and ID NOZZLES

noitpircseD ledoM

IDK 01 IDK 120 Degree 01 Air Induction Tip






Adapter suits HARDI nozzle bodies allowing fitment of most nozzles / caps.

ledoM

9950-0024 Hardi adapter

FLAT FAN NOZZLES The Flat Fan Tip is a 110 degree general spray tip that produces a mixed droplet spectrum over the 30-60 PSI operational pressure range

Model Description List Model Description

30-01F110OR FLAT FAN 01 1.50 30-01F110LL FLAT FAN 025

30-01F110RG FLAT FAN 015 1.50 30-01F110LB FLAT FAN 03

30-01F110YE FLAT FAN 02 1.50 30-01F110RE FLAT FAN 04

GUARDIAN AIR TIP AND CAP The Hypro GuardianAIR is the only spray tip with a pattern and droplet size scientifically designed to maximize coverage and productivity at low spray rates. This technology was originally developed by Hypro for the Syn-genta Amistar nozzle and has been proven on millions of acres around the world. GuardianAIR spray tips boost productivity, control, and profitability using a patented combination of innovations. They are air-induced to

reduce drift and boost on-target spray deposition, yet are tuned to provide more droplets per gallon than any comparable air induced tip. Those coverage-boosting droplets are delivered at an optimized incline that provides more uniform coverage on the entire plant, front and back. Comes complete with cap and gasket.

Model Description List Model Description

FC-GA110-015 Guardian Air 01 13.75 30-01F110LL FC-GA110-025

FC-GA110-015 Guardian Air 015 13.75 30-01F110LB FC-GA110-03

FC-GA110-015 Guardian Air 02 13.75 30-01F110RE FC-GA110-04

UNIVERSAL SPRAY TIP CAP Streamlines spray tip inventory. Allows the use of several varieties of spray tips. Dual positive aligning fingers keep spray tips secure.

noitpircseD ledoM

402990-1 Universal Spray Tip Cap (Black)

HARDI ADAPTER

Price List 9

PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in effect at the time of shipment will apply. All prices quoted are exclusive of GST.

SERIES 9200 SELF PRIMING PEDESTAL MODEL

CENTRIFUGAL PUMPS

xaM paC xaM noitpircseD ledoMPress In

Out

9006C CAST IRON W/1 3/8” 540 RPM HUB AND LOCKING COLLAR KIT (6 SPLINE)

442 LPM 5 bar 1 1/2” 1 1/4”



435 LPM 4.2 bar 1 1/2” 1 1/4”

SERIES 9000 GEAR DRIVEN PUMPS

xaM noitpircseD ledoMCap

Max Press

9203C PEDESTAL CENTRIFUGAL 530 LPM 11 bar 1 1/2” 1 1/4”

9203C-R PEDESTAL CENTRIFUGAL REVERSE RO-TATION (SUIT MOST SPRAY COUPE)

9206S PED. CENTRIFUGAL S/STEEL L/G SEAL 856 LPM 5.5 bar 2” 1 1/2”

9203S-R CENTRIFUGAL REVERSE ROTATION STAINLESS STEEL/LIFEGUARD SEALS

9203S PEDESTAL CENTRIFUGAL STAINLESS 530 LPM 11 bar 1 1/2” 1 1/4”

SERIES 9200 PEDESTAL MODELS CAST & S/STEEL

tuO nI sserP xaM paC xaM noitpircseD ledoM

9263C-C CENTRIFUGAL C/W 12 V CLUTCH 530 LPM 8 bar 1 1/2” 1 1/4”

9263S-CR CENTRIFUGAL (STAINLESS) C/W 12 V CLUTCH REVERSE ROTATION

530 LPM 8 bar 1 1/2” 1 1/4”

9263C-CR CENTRIFUGAL C/W 12 V CLUTCH REVERSE ROTATION


Max Press In

Out

9203C-SP CENTRIFUGAL w/ SELF PRIME CHAMBER 462 LPM 10 bar 1 1/2” 1 1/4”

9203C-R-SP CENTRIFUGAL w/ SELF PRIME CHAMBER REVERSE ROTATION

9205C-BSP CENTRIFUGAL w/ SELF PRIME CHAMBER 617 LPM 8 bar 2” 2”


Max Press In

Out

9203P-S PEDESTAL CENTRIFUGAL 386 LPM 5.5 bar 1 1/2” 1 1/4”

9303P-HM5C CENTRIFUGAL HYDRAULIC DRIVE HM5 428 LPM 7.5 bar 1 1/2” 1 1/4”

9303P-HM2C CENTRIFUGAL HYDRAULIC DRIVE HM2 302 LPM 5.5 bar 1 1/2” 1 1/4”

SERIES 9200 PEDESTAL MODELS—12 VOLT CLUTCH

POLYPROPYLENE PEDESTAL AND HYDRAULIC DRIVE

Model 9006C

Model 9203P

Model 9203C-SP

Model 9263C-C

Model 9203C

Model 9206S

Price List 10


SERIES 9000 CAST IRON HYDRAULICALLY DRIVEN

LifeGuard seals

CENTRIFUGAL PUMPS


Out

9303C-HM2C HYD. DRIVEN PUMP (OIL FLOW 15-22 LPM) 356 LPM 5.5 bar 1 1/2” 1 1/4”



9304C-HM5C HYD. DRIVEN PUMP (OIL FLOW 49-60 LPM) 760 LPM 6.2 bar 2” 1 1/2”

9305C-HM3C HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 685 LPM 12.4 bar

9306C-HM1C HYD. DRIVEN PUMP (OIL FLOW 41-49 LPM) 784 LPM 8.2 bar 2” 1 1/2”

9306C-HM3C HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 810 LPM 9 bar 2” 1 1/2”

HYPRO hydraulically driven centrifugal pumps are widely adaptable for a range of spraying and industrial re-quirements. They are suitable for use with both open and closed tractor hydraulic systems and a range of motor options are available to ensure the pump suits your hydraulic system. Hypro has a detailed hydraulic selection guide (Form 270) to help in correct pump selection. Hypro recommends the use of a free return to tank system on the hydraulic return line to minimize back pressure to the hydraulic motor. Pumps come standard with an hydraulic non return valve and bypass adjustment screw as well as a comprehensive installation manual.


Out

9303S-HM2C HYD. DRIVEN PUMP (OIL FLOW 15-22 LPM) 365 LPM 5.5 bar 1 1/2” 1 1/4”

9306S-HM1C HYD. DRIVEN PUMP (OIL FLOW 41-49 LPM) 784 LPM 8.2 bar 2” 1 1/2”

9306S-HM3C HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 810 LPM 9 bar 2” 1 1/2”

9303S-HM1C HYD. DRIVEN PUMP (OIL FLOW 41-49 LPM) 424 LPM 8.3 bar 1 1/2” 1 1/4”

SERIES 9000 STAINLESS STEEL HYDRAULICALLY DRIVEN HYPRO stainless steel centrifugal pumps are made with 316 stainless steel casings for improved durability and tremendous resistance to aggressive solutions. HYPRO stainless steel pumps are fitted standard with HYPRO LIFEGUARD seals which are silicon carbide based and possess 21 times the dry run survivability of standard seals and 8 times the life in abrasive solutions when compared to standard seals.

Series 9306S

Series 9306C

Series 9303C

Series 9307C

Price List 11


SERIES 2100 VERSA TWIN

CENTRIFUGAL PUMPS

SERIES 9000 SELF PRIMING CAST IRON & STAINLESS STEEL


Out

9303C-HM2C SP HYD. DRIVEN PUMP (OIL FLOW 15-22 LPM) 370 LPM 4.8 bar 1 1/2” 1 1/4”



9305C-HM3C SP HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 650 LPM 9.6 bar 2” 2”

xaM paC xaM noitpircseD ledoMPress

9600C TURBINE PUMP FOR PTO 1000 RPM 1 1/2” PORTS 246 LPM 6.9 bar

ENILPS 12 ”8/3 1 RELPUOC OTP 8700-0231

3430-0346 TORQUE ARM AND CHAIN

SERIES 9200 TURBINE PUMP

xaM paC xaM noitpircseD ledoMPress

2150P-D35DC DIAPHRAGM PUMP 12 volt MOTOR DRIVEN 27 LPM 8 BAR

2120P-P05-EU PLUNGER PUMP 230 volt MOTOR DRIVEN 9.5 LPM 20 BAR

Model 9200

Versa Twin

Model 9000 SP

The Versa Twin series is available in both diaphragm (med. press.) and plunger (hi press.) pump configurations and in both 12 volt and 240 volt motor driven. Suitable for a range of agricultural and industrial applications.

Price List 12


ROVATTI GEARBOX DRIVE CENTRIFUGAL IRRIGA-TION PUMPS FOR 540 R.P.M PTO DRIVE

IMOVILLI DIAPHRAGM PUMPS

D113

MINI

M30 / M50

D82

M73

Model Max Flow @

540 RPM Press

MINI 18 LPM 25 bar

M30 33 LPM 30 bar

M50 50 LPM 40 bar

M73 70 LPM 50 bar

teltuO / telnI ecnamrofreP ledoM

T1-40 UP TO 44 G.P.M AT 340 FT HEAD (200 LPM) 65mm x40mm

UP TO 130 G.P.M AT 300 FT HEAD (590 LPM)

D Series pumps do not include integrated control units

All M series pumps come standard with an integrated control unit.

Model Max Flow @ Max

540 RPM Press

D82 79.LPM 20 bar

D113 110 LPM 20 bar

With water cooled gearbox

2741.50

Price List 13


1 3350-0079A 1/4” F & 1/2” M 40 SS Polypropylene Buna-N

1 3350-0046A 1/2” F 40 SS Polypropylene Buna-N

1 3350-0034A 3/4” F 40 SS Polypropylene Buna-N

1 3350-0058A 1”F 40 SS Polypropylene Buna-N

1 3350-0072A 1 1/4”F 40 SS Polypropylene Buna-N

1 3350-0113A 1 1/2” F 40 SS Polypropylene Buna-N

2 3350-0046 1/2” F 40 SS Type 6 Nylon Buna-N

2 3350-0034 3/4” F 40 SS Type 6 Nylon Buna-N

2 3350-0058 1”F 40 SS Type 6 Nylon Buna-N

2 3350-0072 1 1/4”F 40 SS Type 6 Nylon Buna-N

2 3350-0113 1 1/2” F 40 SS Type 6 Nylon Buna-N

3 3350-0118 1 1/2 “F 20 SS Polypropylene EPDM

3 3350-0120 1 1/2 “F 80 SS Polypropylene EPDM

3 3350-0122 2“F 40 SS Polypropylene EPDM

LINE STRAINERS

3

5

SUCTION STRAINERS Ref Model Size Mesh Materi

4 3350-0032 3/4” hose barb 50 Nylon 3/4 hose

5 3350-0022 1/4 ID 50 Stainless 1/4 “ ID tube

4

5

1

2

WITH OPTIONAL CLEAR BOWL

All 3350 nylon strainers are 150 PSI rated. All 3350 polypropylene models are rated at 80 PSI. Ref No. 2 line strainers are also available with 20 mesh screen. Prices are the same as 40 mesh models. For clear bowls add $25 for 1/2” and 3/4” models and $50 for 1”, 1 1/4” and 1 1/2” models

3

Price List 14


RELIEF VALVES

SUCTION STRAINER S.S SCREEN

REGULATOR—HIGH PRESSURE

R30-14 25mm 80 S.S 1/4” F

R30-38 35mm 80 S.S 3/8” F

R30-12 45mm 80 S.S 1/2” F

R30-34 45mm 80 S.S 3/4” F

R30-100 80mm 80 S.S 1” F

R30-112 80mm 80 S.S 1 1/2” F

JET AGITATORS

1 3371 7.2-30 24-70 3/4”

2 3371-0019 7.9-51 22-76 3/4”

3 3371-0028 10– 90 30-400 3/4”

Ideal for centrifugal pumps. Increases output flow for thorough agitation. Comes with multiple orifice plates to meter flow for optimal pump performance. Provides multi directional agitation.

1

3

2

1 3300-0002 1/2” Bronze S.S ball 200 PSI

1 3300-0001 3/4” Bronze S.S ball 400 PSI

1 3316-0002 1 1/4” Cast Iron S.S cone 200 PSI

2 3300-0015 3/4” Nylon Nylon 150 PSI

2 3300-0016 3/4” Nylon Nylon 250 PSI

noitpircseD daerhT ledoM feR

3 3300-0084 3/8” Balanced pressure 200-2000 PSI. Provides smooth constant pressure regulation

3

2

1

Price List 15


UNLOADER VALVES

PRESSURE GAUGES GLYCERINE FILLED

Model Diameter Pressure range Stem Size

2650-0001 2.5” 0-30 psi, 0-2 bar 1/4” M

2650-0002 2.5” 0-60 psi, 0-4 bar 1/4” M

2650-0003 2.5” 0-100 psi, 0-7 bar 1/4” M

2650-0004 2.5” 0-200 psi, 0-14 bar 1/4” M

2650-0005 2.5” 0-300 psi, 0-20 bar 1/4” M

2650-0006 2.5” 0-600 psi, 0-40 bar 1/4” M

2650-0007 2.5” 0-1000 psi, 0–70 bar 1/4” M

2650-0008 2.5” 0-2000 psi, 0–140 bar 1/4” M

2650-0009 2.5” 0-3000 psi, 0–200 bar 1/4” M

2650-0010 2.5” 0-5000 psi, 0–350 bar 1/4” M

Ref Model Thread Capacity Unloading range

6 3390-0006 1/2” 5 G.P.M 200-500 PSI

6 3390-0037 1/2” 6 G.P.M 300-1000 PSI

7 3390-0051 3/4” 15 G.P.M 100-1500 PSI

8 3390-0067 3/8” 5 G.P.M 200-600 PSI

8 3390-0063 3/8” 5 G.P.M 200-1000 PSI

9 3390-0081 3/8” 7 G.P.M 200-3600 PSI

10 3390-0079 3/8” 7 G.P.M 200-2000 PSI

2650 Bottom mount

2660 Bottom mount

2670 Rear mount


2660-0002 4” 0-60 psi, 0-4 bar 1/4” M

2660-0003 4” 0-100 psi, 0-7 bar 1/4” M

2660-0004 4” 0-200 psi, 0-14 bar 1/4” M


2670-0003 4” 0-100 psi, 0-7 bar 1/4” M

2670-0004 4” 0-200 psi, 0-14 bar 1/4” M

Glycerine filled pressure gauges with stainless steel cases. Dual Bar / PSI scale available in both bottom and rear mount types.

01 68

7

6

Price List 16


HYPRO ACCESORIES

VAC-ON VACUUM SWITCH

Gives run dry protection in by sensing loss of vacuum in suction line and switching off electrical connection. Easily reset. Can be used with both electric and combustion type motors.

ledoM

2510-0001

Cut out pressure

0.3 bar

FOAM MARKER COMPRESSORS 12 VOLT

ledoM

Black Top compressors

Thomas 107CDC-20-194

Thomas 415CDC

Thomas 327CDC56-194

Thomas 910CDC22/12-194

ledoM

FME Single Sided economy marker

FMS Single Sided marker

FMD Double sided marker

For all marking uses including spraying fertilizing etc. Economy model has switch on compres-sor. Others have control box for cabin mounting. For booms to 12 metres

FOAM MARKERS

FLOW METER 9 VOLT High performing flow meters with digital readout. Powered by a single 9 volt battery for portability and convenience.

etar wolF ledoM

Pony Flow 1.5 inch 25-350 litres per min.

.nim rep sertil 057-07 hcni 2 wolF ynoP

TITAN 12 V RETRACTABLE HOSE REEL

ledoM

Titan Reel

Optional Hose Guide

Titan 12 volt retractable hose reels are made in the USA. With a heavy duty 12 volt motor and push button control the Titan reel is suitable for up to 100 metres of 1/2 inch hose or 100 m plus of nylon hose. Ideal for weed control units, pest control etc.

Heavy duty aluminium frame

Nickel plated swivel with ball bearing support, grease fitting and chain guard

Switch and solenoid are mounted on a stainless steel plate and wired to 12 volt electric motor Stainless steel discs, PVC spool. Plated steel hardware. Carbon steel mani-fold

Titan 12 volt hose reel c/w optional hose guide

Price List 17


SPRAY CONTROL VALVES

Model Outlets Pressure Flow LPM

CD 6 3 50 bar 80

CD 7 4 20 bar 200

CD 10 3 50 bar 110

erusserP ledoM feR

1 SPOTSPRAY 120 Lance ideal for Flojet 10 bar

2 VARISPRAY 600 Variable pattern 42 bar

3 TURBO 400 Variable pattern 82 bar

rab 22 NUGDNAH LOTSIP 4

5 TRIGGER LANCE 8 bar

All control valves come standard with pressure gauge, and multiple outlets. Ideal for a range of roller, piston and diaphragm pumps.

PULSATION DAMPER

Model

3375-0003

3375-0017-2

Port

1/2 M

1/2 F

Capacity

10 GPM

6 GPM

Max PSI

500

1000

2

4

3 1

SPRAY GUNS

CD 6

CD7

CD10

4

5

Price List 18


NYLON FITTINGS

ELBOW MALE TAPER THREAD AND HOSE BARB

EL18316 1/8 3/16

EL18516 1/8 5/16

EL14316 1/4 3/16

EL14516 1/4 5/16

EL1412 1/4 1/2

EL38516 3/8 5/16

EL3812 3/8 1/2

EL1238 1/2 3/8

EL1234 1/2 3/4

EL3414 3/4 1/4

EL3412 3/4 1/2

EL34 3/4 3/4

EL1012 1 1/2

EL100 1 1

EL1141 1 1/4 1

EL114112 1 1/4 1 1/2

EL200 2 2

ELBOW HOSE BARB

EL14HB 1/4 x 1/4

EL1214HB 1/2 x 1/4

EL12HB 1/2 x 1/2

EL34HB 3/4 x 3/4

EL114HB 1 1/4 x 1 1/4

EL200HB 2 x 2

STREET ELBOW FEMALE TAPER THREAD BY MALE TAPER THREAD

SE14 1/4 x 1/4

SE34 3/4 x 3/4

SE114 1 1/4 x 1 1/4

SE200 2 x 2

LL12 1/2 x 1/2

LL100 1 x 1

LL112 1 1/2 x 1 1/2

EL3812F 3/8 x 1/2

EL34F 3/4 x 3/4

ELBOW FEMALE TAPER PIPE THREAD

ELBOW FEMALE TAPER THREAD BY HOSE BARB

Nylon fittings are made from grade 6 nylon and are suitable for a range of solutions including ag chemicals, ammonia, detergents, diesel, gaso-line, ethanol, sodium compounds and zinc sulphate.

Price List

PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST. NYLON FITTINGS

INSERT TEE’S THREE HOSE BARBS

TEE THREADED MALE

PART NO BARB SIZE 1 2

T18 1/8 1/8 T14 1/4 1/4 T1438 1/4 3/8 T38 3/8 3/8 T3812 3/8 1/2 T1238 1/2 3/8 T12 1/2 1/2 T58 5/8 5/8 T3412 3/4 1/2 T34 3/4 3/4 T100 1 1 T114 1 1/4 1 1/4 T112 1 1/2 1 1/2 T200 2 2

PART NO THREAD

R12 1/2 x 1/2 x 1/2

PART NO THREAD

TT12 1/2 x 1/2 x 1/2 TT34 3/4 x 3/4 x 3/4 TT100 1 x 1 x 1 TT114 1 1/4 TT112 1 1/2 TT200 2 x 2 x 2

TEE THREADED FEMALE

19

TEE’S FEMALE THREAD WITH 1/4 INCH GAUGE PORT

PART NO. THREAD GT1214 1/2x1/2x1/2 GT3414 3/4x3/4x3/4

PART NO BARB

T1814T 1/4 4/1 T41T

T1438T 3/8 2/1 T2141T

T3814T 1/4 8/3 T83T

T3812T 1/2 8/3 T8321T

T12T 1/2 4/3 T43T

T3412T 1/2

THREAD

1/8 1/4 1/4 1/4

3/8 3/8 3/8 1/2 1/2 3/4 3/4

T3410T 3/4 1

HOSE BARB FOR B100& B35 NUTS NB C100 FITS B100 ONLY

HEX. NUT ADAPTS TO C SERIES HOSE BARBS

PART NO. THREAD

B35 3/4 F B100 1F

PART NO THREAD

C14 1/4 C38 3/8 C12 1/2 C58 5/8 C34 3/4 C100 1

TEE’S MALE TAPER THREAD AND HOSE BARBS

1

2 2

Price List 20


NYLON FITTINGS

MALE TAPER THREAD AND HOSE BARB

A18316 1/8 3/16

A18516 1/8 5/16

A14316 1/4 3/16

A14516 1/4 5/16

A1412 1/4 1/2

A38516 3/8 5/16

A3812 3/8 1/2

A1214 1/2 1/4

A12 1/2 1/2

A1234 1/2 3/4

A3414 3/4 1/4

A3412 3/4 1/2

A34 3/4 3/4

A1034 1 3/4

A10114 1 1 1/4

A1141 1 1/4 1

A114112 1 1/4 1 1/2

A112 1 1/2 1 1/2

FEMALE TA-PER THREAD AND SLIP ON HOSE BARB

Q14 1/4 2/1 21Q

THREAD

1/4 1/2

STANDARD HOSE MEND-ERS

SHM18 1/8

SHM14 1/4

SHM38 3/8

SHM34 3/4 1 001MHS

SHM1238 3/8 2/1 21MHS

SHM1258 5/8 8/5 85MHS

SHM114 1 1/4

SHM200 2

THREAD 1/8 1/4 1/4 3/8 3/8 1/2 1/2 1/2 1/2 5/8 3/4 1

1 1/4 1 1/2

2

F18 1/8

F38 3/8

F34 3/4

F200 2

F114 1 1/4

BRAB ON TRAP

AF14 1/4 4/1 8341FA

AF38 3/8 2/1 21FA

AF34 3/4

1/4 3/8 3/8 1/2 3/4

HEX PLUGS WITH MALE TAPER THREADS FEMALE TA-

PER THREAD WITH HOSE BARB

Price List 21

PRICES EFFECTIVE JAN 1 2009 Prices subject to change without notice. All prices FOB factory. The price in ef-fect at the time of shipment will apply. All prices quoted are exclusive of GST. NYLON FITTINGS

REDUCER BUSHINGS

REDUCER NIPPLES MALE TAPER THREAD

COUPLERS FEMALE TAPER THREAD

NIPPLE MALE TAPER THREAD

RB3818 3/8 8/3 4183BR

RB1214 1/2 2/1 8321BR

RB3418 3/4

RB11434 1 1/4

RB11234 1 1/2

RB112114 1 1/2 2 43002BR

RB200100 2 2 411002BR

RB200112 2

THREAD

1/8 1/4 1/4 3/8 1/8

3/4 1

3/4 1

1 1/4 3/4 1

1 1/4 1 1/2

RB3438 3/4 3/8

RB1012 1 1/2

M18 1/8 1/8

M38 3/8 3/8

M34 3/4 3/4

M114 1 1/4 1 1/4

M200 2 2

M1418 1/4 x 1/8

M3814 3/8 x 1/4

M1214 1/2 x 1/4

M3438 3/4 x 3/8

FC12 1/2 x 1/2

FC100 1 x 1

FC112 1 1/2 x 1 1/2

NYLON FITTINGS are suitable for pressures to 10 bar (150 PSI). At low pressure fittings may be used at tem-peratures to 80 degree Celsius.

NYLON has good resistance to a broad range of chemicals including most agricultural chemicals, ammonium compounds, detergents, diesel fuel, gasoline, ethanol, hexane, magnesium sulphate, most sodium com-pounds, trichloroethylene and zinc sulphate. NYLON FITTINGS should not be used with acid based fertilizers, bromine, chlorine, fluorine, hydrochloric acid, nitric acid, phosphoric acid, sulphuric acid, iodine and xylene.

Price List 22


NYLON FITTINGS

NOZZLE BODY ELBOW LOCK NUT INCLUDED

NTL38 1 1/16 3/8

NOZZLE BODY TEE LOCK NUT INCLUDED

NTT38 3/8 2/1 21TTN

THREAD

1 1/16 1 1/16

BC34R 3/4” BOOM CLAMP ROUND

BC100 1” BOOM CLAMP SQUARE

BOOM CLAMP ASSEMBLY BOOM CLAMPS WILL ADAPT TO ALL NOZ-ZLE BODY FITTINGS TUBE AND WILL CLAMP TO EI-THER ROUND OR SQUARE TUBE BOOMS.

STRAIGHT NOZZLE BODY WITH HOSE BARB LOCK NUT INCLUDED

3838D 1 1/16 3/8 T38C 1 1/16 3/8

NOZZLE BODY NIPPLE

NB1614 1 1/16 1/4

NOZZLE BODY NUT AND CAP NUT

8027 1 1/16

BALL CHECK VALVE ASSEMBLY

NBC10 11/16 MX 11/16 F

NOZZLE BODY CROSS LOCK NUT INCLUDED

8027

16.70

Documents

Price List Draft RGD Jan 1 2009 - RGD Corporation · DRIVEN PUMP (OIL FLOW 41-49 LPM) 460 LPM 7.6 bar 1 1/2” 1 1/4” 9305C-HM3C SP HYD. DRIVEN PUMP (OIL FLOW 57-76 LPM) 650 LPM