Download pdf - Plaza Viva – the textile pergola awning · weinor is an eco-friendly company. To ensure compliance with high environmental standards, manufacturing processes and materials undergo

Plaza Viva – the textile pergola awningPrice list and technical information for 2017

Plaza Viva Stretch/LED | Plaza Viva OptiStretch/LED

InternationalLast revised September 2017

Recommended retail prices in Euros (excluding legal VAT). Valid to 31.12.2017. We reserve the right to make technical and price-related changes as well as changes in range and product portfolio. For technical reasons, the colours may appear slightly different when printed.

NEW!

Awnings Patio roofs Glasoasen®

2

Contents

Prices and technical information4 - 5 Overview and highlights6 - 8 Product benefits and versions

9 LED lighting10 Telescopic post and compensation joint11 Gear handle position and fabric support rollers

12 - 13 Valance Plus and Paravento 14 - 17 Prices18 - 19 Site dimension and planning20 - 27 Control and operation

28 Stretch and OptiStretch29 Tension system

30 - 31 Multi-section units32 - 33 Technical details and sections34 - 41 Installation options

General Information42 - 43 Frame colours44 - 45 weinor fabrics 46 - 47 General terms of delivery and payment

Recommended retail prices in Euros, plus VAT, valid to 31.12.2017 subject to amendment in- between. Our General terms of delivery and payment apply – see pages 46 - 47. We reserve the right to make technical changes

weinor is an eco-friendly company. To ensure compliance with high environmental standards, manufacturing processes and materials under go regular testing by experts.

3

Plaza Viva – textile pergola awning

Plaza Viva stands for reliable weather protection for your favourite outdoor space. It is incredibly wind-resistant and integrates subtly into the overall look of the building. Not forgetting its practical use on facades that don’t have enough load-bearing capacity to mount a folding arm awning. Technical innovations such as the optional adjustable telescopic post, the OptiStretch version, integrated LED lighting and gear handle operated Valance Plus leave almost nothing to be desired.

Plaza Viva The textile pergola awning for use in almost any weather

44

1. Compensation joint:Reduces the load on the entire construction when lowering the post

2. Wall bracket with floating bearings: Also reduces the load on the awning when lowering the post

3. Telescopic post:Can be lowered using the gear handle to disperse rainwater effectively

Integrated LED lighting:Atmospheric patio lighting

No visible fixings:Elegant, slimline, clean lines

3-part rain protection system

The weinor pergola awning is only available with motor drive. On the basis of radio technology, it can be controlled using the weinor BiConnect or Somfy RTS and io-homecontrol® systems. A wired version is also available.


5

Text

5

NEW!

Service opening hatch:Easier access to the drive and control components with BiConnect

New flat rope:Quiet and extremely tear-resistant

Plaza Viva OptiStretch:Held captive on 4 sides, no light gap

Plaza Viva Stretch:Held captive on 2 sides, cost effective solution

Plaza VivaThe textile pergola awningfor almost any weather applications

The powder coating done in our in-house factory guarantees colour fastness and a uniform gloss level.

Plaza Viva fabrics are sewn, spinneret dyed, water repellent and dirt-resistant in high quality.

coloursby weinor®

6


Product benefits in detail

Large areas can be covered – thanks to the sturdy posts and frameworkThe Plaza Viva stands on solid posts. Making it suitable sun protection for large terraces and offering reliable protection against surging winds.

• For larger dimensions up to 30 m²• Can also be installed on difficult

and insulated facades due to re-duced load acting on the installa-tion points

• Wind-resistant up to wind force 6 on the Beaufort scale

• Elegant design, almost no visible screws

The optional telescopic post can be raised and lowered on one side using the gear handle thus ensuring that rain drains off easily with a pitch awning of 4° or more.

• Only one telescopic post per individual unit

• Reliable water drainage• No pooling on the fabric

Please observe the important details on page 10.

New: telescopic post option for effective water drainage

Plaza Viva Stretch: the really even tautness of the fabric positioning and performance creates a cosy atmosphere.• Stretch: held captive on 2 sides,

cost effective, easy installation

Plaza Viva OptiStretch: completely enclosed all round, ensures optimum fabric positioning without any hanging or saggy fabric edges. On very large dimensions it also re-duces the sag of the cover during operation. • OptiStretch: held captive on all

4 sides, no light gap

Clever Stretch and OptiStretch versions

The combination of a compensa-tion joint and wall bracket with floating bearings reduces the load on the entire construction when the awning is lowered using the gear handle.

• Rain drains off reliably (no danger of pooling)

Compensation joint and floating bearing

Functioning principle of OptiStretch

7

Product benefits in detail


The Valance Plus is elegantly inte-grated into the Plaza Viva’s drop profile. It provides privacy and glare protection even with a low-lying sun.• Can only be operated by gear

handle up to 2100 mm • Patented OptiFlow-System® to

keep fabric ideally positioned and to close the drop profile safely

• Valance Plus may only be extend-ed and retracted when using a telescopic post if the telescopic post is cranked right up to the top

• Not in combination with integrat-ed LED lighting

• Can be combined optionally with the LED Design light bar

Valance Plus – vertical privacy and sun protection

The opening in the cassette offers easy access to the motor input with BiConnect.

• Easier access to components • The programming of the drive’s

end positions is made easier by the service opening

• Decoupling of the wind sensors during maintenance

Service opening hatch – convenient access for maintenance

The LED spotlights integrated into the cassette produce atmos-pheric lighting on the patio.

• 30,000 hours of LED lighting with minimal energy consumption

• LED infinitely dimmable using weinor’s BiConnect control

Atmospheric LED spotlights – for the ultimate environment after dark

The tried and tested tension system is used with the Plaza Viva and the new flat rope is used. This is ex-tremely resilient and rolls up more consistently than conventional round tension ropes. The result is an all round better positioned and tensioned fabric.

• Long lasting consistent tension with tried and tested pulley system

• The flat rope is quiet end tear resistant, and is prevented from twisting and jumping during operation. The risk of fraying is also virtually eliminated

Reliable tension system – with new flat rope for quiet operation

8


Plaza Viva versions

Plaza Viva Stretch

Plaza Viva OptiStretch

Plaza Viva Stretch LED

Plaza Viva OptiStretch LED

Technology

Max. width 6,000 mm 6,000 mm 6,000 mm 6,000 mm

Max. projection 5,000 mm 5,000 mm 5,000 mm 5,000 mm

Max. fabric area 30 m2 30 m2 30 m2 30 m2

Cassette size (width x height) 166 x 325 mm 166 x 325 mm 166 x 325 mm 166 x 325 mm

Gear drive ⎯ ⎯ ⎯ ⎯

Motor drive • • • •

Awning pitch 4° – 25° 4° – 25° 4° – 25° 4° – 25°

Installation/fixing options p. 34 on p. 34 on p. 34 on p. 34 onLED lighting (separate spot-lights) ⎯ ⎯ • integrated in the

cassette• integrated in

the cassetteValance Plus option

Max. width 6,000 mm 6,000 mm ⎯ ⎯

Max. projection for Plaza Viva 5,000 mm 5,000 mm ⎯ ⎯

Motor drive ⎯ ⎯ ⎯ ⎯

Gear drive • • ⎯ ⎯Plaza Viva angle of pitch max. 20° max. 20° ⎯ ⎯

Valance Plus projection (H) 1,000, 1,500, 2,100 mm ⎯ ⎯

Design

47 standard frame colours • • • •

Over 150 other RAL colours • • • •

9 trend colours • • • •

Other structural colours • • • •

weinor fabric collection • • • •

Soltis® 86• only up to 5,000

mm wide x 4,000 mm projection

⎯• only up to 5,000


⎯

Soltis® 92• only up to 5,000


⎯• only up to 5,000


⎯

Other fabric collections • • • •

Accessories

Fixing brackets p. 34 on

Radio control • see weinor/Somfy radio controls, from page 20

Hard wired switch operation • see weinor hard wired, from page 25

Quality

Wind resistance The Plaza Viva has been tested in the maximum dimensions up to wind force 6 on the Beaufort scale (in accordance with wind resistance class 3) and with-stands this load

Rain class 2 is met With Plaza Viva with fixed posts from a pitch of 14°With Plaza Viva with telescopic posts from a pitch of 4° with fully lowered post

• Standard • Option ⎯ Unavailable

9


Plaza Viva LED – with LED lighting

The select high-power LED compo-nents are patented and represent the very best in weinor quality:• Integrated into the cassette• Atmospheric light thanks to

special glass lenses • Lighting remains on even when

awning is retracted

• Highly energy-efficient • Operating life of 30,000 hours• Infinitely dimmable when used

with BiConnect radio control• Easy to service: simply replace

individual LED lights without uninstalling the awning

LED lighting – 30,000 hours of lighting with extremely low energy consumption

Awning width in mm

Number of separate LED spotlights

Awning width in mm

Number of separate LED spotlights

– 3,000 5 4,501 – 5,000 93,001 – 3,500 6 5,001 – 5,500 103,501 – 4,000 7 5,501 – 6,000 114,001 – 4,500 8


10

Plaza Viva – telescopic post (option)

Compensation joint and floating bearing

The optional telescopic post can be really easily lowered on one side using the gear handle providing an awning pitch of 4° and fully cranked down post so that rain drains off reliably.

When lowering the top part of the post using the gear handle, it reduc-es the load on the construction and it remains inherently stable. The wall bracket with floating bearing and compensation joint on the up-per part of the post ensure that the entire awning adapts perfectly to the pitch.

Left: Controlled draining with lowered post.Right: If the post is not lowered, the water may collect on the Plaza Viva leading to pooling.

Important information Please note:• The telescopic post should ideally

always be moved into the highest or lowest position as it can only be locked in place there. If it is moved to a position in between it may lower of its own accord because there is no locking in place.

• The unit may only be extended and retracted if the telescopic post is set at the highest point

• The mounting of telescopic posts on both sides is not recommended as this would cancel out the bene-fit. It would then only be guaran-teed that rain would drain off reliably from a pitch of 14° again.

• 2 telescopic posts are also unsuit-able for protection against the low-lying sun as lowering be-tween 150 to 350 mm does not offer sufficient protection. The Valance Plus is ideal for this.

11


Use of fabric support roller at bottom

Use of fabric support roller at top (with Valance Plus option)

Gear handle position

A fabric support roller fitted below the fabric as standard with a projec-tion > 4000 mm. With locations exposed to winds we recommend using additional fabric roller supports (option). The fabric support rollers can be retrofitted at any time without too much effort.

With the Valance Plus option the fabric support roller (from a projec-tion > 4000 mm) is fitted above the fabric as standard.

Side channel length

Projection

Standard gear handle height 900 mm.Different gear handle position on request.

TEFF = Top edge of finished floor

Lift

Post

hei

ght ≥

Gea

r han

dle

heig

ht +

100

0 +

lift

Max

. gea

r ha

ndle

hei

ght

1100


12

Valance Plus option – privacy and sun protection from the front

The gear handle operated vertical sun protection is integrated elegantly into the Plaza Viva drop profile.• Glare protection and privacy pro-

tection up to a maximum valance height of 210 cm

• Only possible with gear drive, only extend and retract the Valance Plus with the telescopic post cranked up

• Valance Plus use up to a Plaza Viva pitch of 4° to 20°.

• Not possible in combination with integrated LED lighting

• Can be combined optionally with the LED Design light bar

• Valance Plus cannot be retrofitted • With Valance Plus, the fabric

support roller is always mounted above the side channel

Please note: the Valance Plus should be extended and retracted slowly to guarantee that the fabric winds up neatly.

Valance Plus – more privacy thanks to vertical privacy and sun screen (optional)

Plaza Viva Valance Plus with gear drive Plaza Viva Valance Plus – with retracted Valance Plus (left) and slightly extended Valance Plus (right)

13


Paravento option – the stylish side awning

The Paravento side screen is the perfect complement to the Plaza Viva pergola awning.• Protects against cool side winds• Shelters from prying eyes• Heights of up to 250 cm and

projections of up to 400 cm• Easy to retrofit by attaching it to

the Plaza Viva posts, a separate pole or a wall


14

166

166

323

323

Price does not include mounting screws and dowels

Plaza Viva/LED/Valance Plus General Information

Prices incl. drive Prices incl. 2 wall brackets

Included in basic price:

Con-nection

Plaza Viva with 3 m black lead and open endsPlaza Viva LED

hard wired: with two black 3 m leads and open endswith radio control: with black 3 m lead and open ends

Frame colour 47 standard colours (single colour) 9 trend colours

Fabric weinor acrylic and polyester fabric collec-tion, sewn. Bonding possible on request and with no extra charge.Soltis® 86; Soltis® fabrics ultrasonically cut and glued – only possible with Stretch, not with OptiStretch

Posts/fixing Posts 70 x 70 mm, length 2600 mm with post plate and cover, two wall brackets

Fabric for standard Valance Plusweinor acrylic and polyester fabric collection weinor acrylic fabric collection, unicolour seam-less fabricsPerluca in unit widths of 120 cm or 240 cmSoltis® 86, panel width 177 cm, individual patterns, also available in unit widths of 267 cm

Surcharges for:

Remote transmitterBiEasy 1M 88.00BiEasy 5M 108.00BiEasy 15M 149.00Radio receiverBiRec MA-K 100.00BiRec MLED (controls drive and dims LED light) 340.00Other RAL coloursOther RAL colours + 10% on top

of basic priceOther structural colours + 15% on top

of basic priceValance Plus fabricSoltis® 92, panel width 177 cm, individual pat-terns, also available in unit widths of 267 cm

per m² 19.00

StarScreen unit width 325 cm per m² 19.00Non-weinor collection (acrylic and polyester) per m² 12.00

166

323

Technical features The fabric support roller is used underneath the fabric as standard with a projection > 400 cm. With Valance Plus it is used at the top.

Note • The Plaza Viva with fixed posts complies with rain class

from a pitch of 14° • With telescopic posts it already complies with rain class 2

from a pitch of 4° with fully lowered telescopic postsThe Plaza Viva planning aid Using the clever planning aid you can easily calculate the installa-tion height, pitch and delta value for the height difference between the wall bracket bottom edge and projection profile head clearance height by specifying the projection or patio depth you want.

NEW!

15


Cassette width in cm

Projection in cm Surcharges-250 251-300 301-350 351-400 401- 450 451-500 Additional

fabric sup-port roller

Wall sealing profile for roof

Valance Plus with gear handle in cm100 150 210

-300 3114 3198 3286 3377 3544 3614 171 100 543 582 622301-350 3257 3350 3449 3546 3694 3770 180 116 585 633 680351-400 3396 3501 3610 3718 3852 3935 188 133 635 685 738401-450 3541 3651 3768 3886 4208 4297 196 150 678 737 796451-500 3682 3820 3929 4058 4376 4472 205 166 723 788 854501-550 3900 4032 4245 4367 4545 4647 217 183 771 841 912551-600 4046 4183 4403 4530 4646 4754 237 200 820 894 970





Number of LED spotlights

-300 3545 3629 3717 3808 3975 4045 171 100 5301-350 3688 3781 3880 3977 4125 4201 180 116 6351-400 3854 3959 4068 4176 4310 4393 188 133 7401-450 3999 4109 4226 4344 4666 4755 196 150 8451-500 4235 4373 4482 4611 4929 5025 205 166 9501-550 4453 4585 4798 4920 5098 5200 217 183 10551-600 4628 4765 4985 5112 5228 5336 237 200 11





Valance Plus with gear handle in cm100 150 210

-300 3292 3388 3488 3592 3771 3854 171 100 543 582 622301-350 3435 3540 3651 3761 3921 4010 180 116 585 633 680351-400 3574 3691 3812 3933 4079 4175 188 133 635 685 738401-450 3719 3841 3970 4101 4435 4537 196 150 678 737 796451-500 3860 4010 4131 4273 4603 4712 205 166 723 788 854501-550 4078 4222 4447 4582 4772 4887 217 183 771 841 912551-600 4224 4373 4605 4745 4873 4994 237 200 820 894 970





Number of LED spotlights

-300 3723 3819 3919 4023 4202 4285 171 100 5301-350 3866 3971 4082 4192 4352 4441 180 116 6351-400 4032 4149 4270 4391 4537 4633 188 133 7401-450 4177 4299 4428 4559 4893 4995 196 150 8451-500 4413 4563 4684 4826 5156 5265 205 166 9501-550 4631 4775 5000 5135 5325 5440 217 183 10551-600 4806 4955 5187 5327 5455 5576 237 200 11

Plaza Viva Stretch

Plaza Viva Stretch LED

Plaza Viva OptiStretch

Plaza Viva OptiStretch LED

Soltis® 86 and 92 only possible in these dimensions, projection 400 cmA fabric support roller is used as standard with a projection of 401 cm or more

Available fabrics for the Valance Plus

Soltis® 86, 92

Soltis® 86, 92

Acrylic Perluca WeiTex polyester StarScreen

Pattern unicolour unicolour stripes unicolour unicolour unicolour stripes unicolour unicolourUnit width

Valance length177 cm 267 cm 120 cm 120 cm 240 cm 120 cm 240 cm 120 cm 120 cm 325 cm

100 cm S S L S S S/L S L S S150 cm S S – T S T S – T S210 cm T S – T S T S – T S

S Seamless: seamless fabric; structure of fabric runs crosswise to structure of awning fabricT Transverse seam: fabric with transverse seam; either in top or bottom third as desired; struc-

ture of fabric runs crosswise to structure of awning fabric; only possible as unicolour fabric

L Longitudinal seam: structure of fabric runs longitudinally to structure of awning fabric

– Not available


16

Options

Illustration Designation Item No. Price

Telescopic post (adjustable post), surcharge 345.00

Reduced price per post 145.00

Wall sealing profile for roof See page 15

The wall sealing profile conceals the gap between the wall and the cassette. This is a useful option if there is no roof over hang above the cassette.

Wall sealing profile for roof (optional)

17


Installation tools

Illustration Designation Item No. Price

Complete additional wall bracket 120513 59.00

1 rafter bracket + 1 mounting plate for rafter bracket + screw set for rafters + screw set mounting plate for rafters one left or right version each (delivery without wall bracket)

120511 73.00

1 rafter bracket + screw set for rafters one left or right version each (delivery without wall bracket)

120512 43.00

235 x 160 x 18 x 180 mm angle bracket, complete (roof mounting/installation on wall) 120672 42.00

Stand off bracket 143.00

Stilt for installation on roof (delivery without wall bracket) 290.00

Angle bracket for post installation 39.00

Standard post plate 120226 39.00

Post plate cover plate, 72 x 72 mm 101169 37.10

Adjustable post plate for uneven ground or Krinner screw foundation system, complete 120510 39.00

100 x 50 x 5 x 120 mm wall-mount angle bracket (attaching on side of wall) 101979 27.00

Small parts set for cable fixing 120843 7.00

Base plate 5, 10 mm 36.00

Base plate 15, 20 mm 46.00

Details about installation tools can be found starting on page 34


18

Fixed post: determining the patio depth (T) and projection (B)

The patio depth (T) and projection (B) as well as instal-lation height and delta using the example of the angle

Angle of pitch (α)

Projection (B) in mm2500 3000 3500 4000 4500 5000

4° 2355 2854 3353 3851 4350 4849 5° 2352 2850 3348 3846 4344 484210° 2326 2819 3311 3804 4296 478814° 2294 2779 3265 3750 4235 472020° 2224 2693 3163 3633 4103 457325° 2146 2599 2923 3506 3959 4412

Patio depth (T) in mm (rounded figures)

Determining the patio depth (T) (up to inside edge of post)

Angle of pitch (α)

Patio depth (T) in mm2500 3000 3500 4000 4500 5000

4° 2645 3147 3648 4149 4650 5° 2649 3151 3653 4155 465710° 2676 3184 3692 4200 470714° 2712 3227 3743 4258 477320° 2794 3326 3859 4391 492325° 2890 3442 3994 4546

Projection (B) in mm (rounded figures)

Determining the projection (B)

Angle of pitch (α)


4° 2225 2724 3223 3721 4220 4719 5° 2222 2720 3218 3716 4214 471210° 2196 2689 3181 3674 4166 465814° 2164 2649 3135 3620 4105 459020° 2094 2563 3033 3503 3973 444325° 2016 2469 2923 3376 3829 4282

Patio depth (T) in mm (rounded figures)

Determining the patio depth (T) (up to inside edge of post)

Angle of pitch (α)

Patio depth (T) in mm2500 3000 3500 4000 4500 5000

4° 2776 3277 3778 4279 4781 5° 2779 3281 3783 4285 478710° 2808 3316 3824 4332 483914° 2846 3361 3877 4392 490720° 2933 3465 3997 452925° 3034 3586 4137 4689

Projection (B) in mm (rounded figures)

Determining the projection (B)

of pitch 4°, 5°, 10°, 14°, 20° and 25° can be determined using the following tables.

Telescopic post: determining the patio depth (T) and projection (B)

19


Important:• Plaza Viva with fixed post: there is no risk of pooling

from a pitch of 14°• Plaza Viva with telescopic post: there is no risk of pooling

from a pitch of 4° and with fully lowered post

Angle of pitch (α)


4° 2202 2237 2272 2307 2342 2377 5° 2244 2288 2332 2375 2419 246210° 2452 2539 2625 2712 2799 288614° 2615 2736 2857 2978 3099 322020° 2854 3025 3196 3367 3539 371025° 3047 3258 3470 3681 3892 4104

Wall bracket bottom edge installation height (Ukw) in mm (rounded figures)

Determining the installation height (wall bracket bottom edge (Ukw))

Telescopic post and fixed post: determining the installation height (Ukw) and delta (Δ)

Angle of pitch (α)


4° 102 137 172 207 242 277 5° 144 188 232 275 319 36210° 352 439 612 612 699 78614° 515 636 878 878 999 112020° 754 925 1267 1267 1439 161025° 947 1158 1370 1581 1792 2004

Delta (Δ) in mm (rounded figures)

Determining the delta: difference between the wall bracket bottom edge (Ukw) and head clearance height (DH)

Legend:B = projectionα = angle of inclination (roof pitch)Ukw = wall bracket bottom edgeΔ = height difference (Ukw – DH)T = patio depthUeg = straight overhangDH = head clearance height

Telescopic post and fixed post: recess measurement

The posts can be recessed (moved inwards) by up to approx. 25% of the projection and a maximum of 1000 mm. Installation tolerances are specified made-to-order on the installation sheet.

25% of the projection can be recessed, max. 1000


20

BiConnect remote control

How routing technology works* This is how the signal is forwarded (routed) from one remote receiver to the next – any obstacles are circumvented.

Building

Receiver1

Receiver2

Receiver3

Target receiver4


All awnings and shades

LED light bar systems

BiSensWeather sensors

Heating system Tempura

weinor BiEasy hand transmitter• Operationally safe thanks to pro-

tected transmission frequency (868 MHz)

• Attractive and convenient design

BiRec Remote receiver • Various remote-controlled

receivers depending on function combinations

• To suit awning fittings – e.g. to extend and retract the awning or dim the lights

Sun and sun/wind sensors – auto-matic heat and product protection (option)The BiConnect series remote sensors automatically extend the Plaza Viva when the sun shines and reliably retract it in case of wind or cloud. We do not advise using sensors with the Valance Plus option and/or telescopic posts.

BiEasy APPPlease see technical brochure “Ac-cessories” for further information.

weinor BiConnect – control for awning, light and heatingThe Plaza Viva comes as standard with one drive and can optionally be controlled using the pre-pro-grammed BiEasy remote control.

There are hand transmitters with different numbers of channels: choose from 1, 5 or 15 channels with a display.

BiEasy 1M BiEasy 5M

BiEasy App

= Routing signal and feedback signal* Very simplified illustration

BiEasy 15M with display

State-of-the-art routing technologyThe new BiConnect radio control transmits bidirectional signals and is very reliable thanks to its ultra-modern routing technology. In this case, the BiEasy handheld transmit-ter sends a radio signal to an active receiver within its range. The signal is then forwarded from one receiver to the next until it reaches the tar-get receiver – and all this occurs in a second.

21



BiRec receiver

BiRec MA-K remote receiver for drive control

BiRec MLED Combi-remote-receiver for main drive and LED with integrated power supply pack in cassette

BiSens SW-230 V Sun, wind sensor with power connection

BiSens SW-Solar Sun and wind sensor with solar operation (not suitable for units used as privacy protection)

BiSens SUN-Solar Sun sensor solar operation

BiSens sensors*

Product BiConnectPlaza Viva drive Receiver integrated into cassette

LED lighting Dimmable, combi-remote-receiver for main drive and LED with integrated power supply pack in cassette

Valance Plus option • Only available with gear drive• Not dimmable, additional receiver required (BiRec On/Off)

Tempura/ Tempura Quadra heating

• Additional receiver required for fine-tuned dimming (BiRec HD)• Installation of the receiver in the design bar provided for this

purpose (Tempura Universal) • Receiver can be integrated in the base (Tempura Quadra)

Product Equipment Remote receiver Hand transmitter

Plaza Viva Drive BiRec MA-K BiEasy 1M/1MW-3VDrive + Heating (option) BiRec MA-K; BiRec HD BiEasy 5M/15M/App

Plaza Viva LEDDrive + LED light BiRec MLED BiEasy 5M/15M/AppMotor + LED light + Heating (option) BiRec MLED; BiRec HD BiEasy 5M/15M/App

Plaza Viva Valance Plus

Drive + Valance Plus* BiRec MA-K BiEasy 5M/15 M

Drive + Valance Plus* + Heating (option) BiRec MA-K + BiRec HD or

BiRec On/Off BiEasy 5M/15 M

* Valance Plus only available with gear drive and cannot be combined with the LED version

Installation location for receiver, power supply pack and further electrical componentsThe BiConnect receiver is accommo-dated in the cassette. The faceplate (not shown here) can be really easily opened for servicing purposes. The receiver is then easily accessible.

* We do not recommend any sensors when using telescopic posts and/or the Valance Plus. Nevertheless, if sensors are used, the Valance Plus or telescopic posts may only be used if the sensors are switched to manual operation.

1

1 The cover can be opened for servicing purposes, e.g. to disconnect the drive from the control components (only BiConnect).


22

Somfy RTS radio technology

Somfy RTS radio control

Tempura heating system

Plaza Viva


Awning

RTS weather sensors

Wall transmitter:

Telis 1 RTS Pure

Telis 4 RTS Pure

Telis Soliris RTS Pure

Telis 4 Soliris RTS Pure

Somfy RTS

Since RTS works unidirectionally, no feedback is given on the status of the units. The radio control system runs on a frequency of 433.42 MHZ.

Chronis RTS smartSmoove 1 RTS Pure Shine

Somfy RTSAlternatively, the Plaza Viva can also be controlled with Somfy RTS.

23


Somfy RTS radio technology

Somfy RTS receiver (for LED)

Lighting Slim Receiver RTSRemote receiver for LED control

Soliris Sensor RTSWind and sun sensor with mains connection

Somfy RTS sensor*

Product Somfy RTSPlaza Viva LED drive Radio-receiver integrated in the RTS remote-controlled motor

LED lighting• Not dimmable• Additional receiver Lighting Slim Receiver RTS

(with downstream power supply pack)• Integration in the cassette

Valance Plus option • Only available with gear driveTempura/ Tempura Quadra heating

• Receiver integrated in additional design bar• Not dimmable, additional external receiver required Heating

Slim Receiver RTS Plug

Product Equipment Remote receiver Hand transmitter

Plaza VivaDrive integrated in the remote-

controlled motorTelis 1 RTS Pure/Telis 1 Soliris RTS Pure/Smoove 1

Drive + Heating (option) Heating Slim Receiver RTS Plug Telis 4 RTS Pure/Telis 4 Soliris RTS Pure

Plaza Viva LEDDrive + LED light Lighting Slim Receiver RTS Telis 4 RTS Pure/Telis 4 Soliris RTS Pure

Drive + LED light + Heating (option) Lighting Slim Receiver RTS; Heating Slim Receiver RTS Plug Telis 4 RTS Pure/Telis 4 Soliris RTS Pure

Plaza Viva Valance Plus

Drive + Valance Plus* integrated in the remote- controlled motor Telis 4 RTS Pure/Telis 4 Soliris RTS Pure

Drive + Valance Plus* + Heating (option)integrated in remote- controlled motor; Heating Slim receiver RTS Plug

Telis 4 RTS Pure/Telis 4 Soliris RTS Pure

* Only available with gear driveNote: Plaza Viva Valance Plus is not available in combination with LED

Installation location Somfy RTS receiver (for LED) The Somfy RTS receiver is accommo-dated in the cassette and can there-fore be easily replaced in case of service.



24

Somfy io-homecontrol® radio technology

Somfy io-homecontrol® sensors

All awnings and shades


io-homecontrol® weather sensors

Situo 5 io Easy Sun io Smoove 1 io Pure Shine

io-homecontrol® allows every con-venience and security feature to be combined into one network and be controlled using a single remote

transmitter. The expandable system can also incorporate any new products that are added.

Lighting Receiver io

Somfy io-homecontrol® receiver

Somfy io-homecontrol® sensor*

Sunis WireFree ioRadio sun sensor

Sensor Box ioCommunication unit

Product Somfy io-homecontrol®Plaza Viva drive Receiver integrated in the io-remote-controlled motor

LED lighting• Not dimmable• Additional receiver lighting receiver io

(with downstream power supply pack)• Integration in the cassette

Valance Plus option Only available with gear driveTempura/ Tempura Quadra heating

unavailable

Product Equipment Remote receiver Hand transmitterPlaza Viva Drive integrated in the remote-controlled motor Situo 1 or 5 io Smoove 1 io Pure ShinePlaza Viva LED Drive + LED light Lighting Receiver io Easy Sun ioPlaza Viva Valance Plus* Motor integrated in the remote-controlled motor Situo 1 or 5 io Smoove 1 io Pure Shine

* Only available with gear drive

Installation location for Somfy Lighting receiver ioThe Somfy receiver is accommodat-ed in the cassette and can be there-fore easily replaced in case of service (see page 23).


25

weinor hard wired (existing power supply/switch)


Tempura heating system


All sun protec-tion systems

Product weinor firmly wired (commutator/control on site)

Plaza Viva drive • No receiver required • Switch/power supply or control on site

LED lighting • Not dimmable• Switch/power supply on site


• Not dimmable• Switch/power supply on site

A hard wired control makes sense in the case of existing power cables or sources of interference for radio control.

Power supply pack for option LED (firmly wired)Position of the power supply pack

Product

in the cassette Plaza Viva LED Plaza Viva LED OptiStretch

no power supply pack necessary

Plaza Viva Plaza Viva OptiStretch

The power supply pack provides the voltage and current intensity required to operate the LED. It is only necessary for the LED option.

Installation location for power supply pack for option LEDThe power supply pack is located in the cassette and is easily accessible. The installation location is not required for drives without LED options and remains empty.

Plaza Viva

Power supply pack for option LED


26

weinor firmly wired with Somfy control

How the IB cable system works

How the Uno cable system works Control cable 230 V cable

Control cable 230 V cable

230

V

230

V

230

V

230

V

Control unit + sensor Uno/IB Smoove Uno IB + Pure Shine

For the hard wired version, a Somfy switch and weather sensor can be supplied with the awning.

Product weinor firmly wired with Somfy controlPlaza Viva drive No receiver required

LED lighting• Not dimmable• Integration of the power supply pack in the cassette• Switch/power supply on site


• Not dimmable• Switch/power supply on site

27

Plaza Viva heating and accessories


Tempura, the energy-efficient infra-red heating system convinces with heat output of 1,500 watt in a tiny housing.• Instant heat: no warm-up time• Turn as required for targeted

warmth• Can be optionally operated via

radio control (only possible with BiConnect and Somfy RTS)

• Splash protection

• Comes in 47 standard frame colours plus 9 scratch-proof, re-sistant trend colours with a smart, textured look

• Optional: 150 special RAL colours • Universal bracket makes it easy

to retrofit (mounted to the wall)• TÜV tested• With the Tempura Quadra, the

radio elements can be integrated in the housing

Tempura/Tempura Quadra Universal heating system (option)

Tempura Quadra Universal

While the remote receiver with the Tempura Universal is housed in the design bar, they can be integrated into the base with the Tempura Quadra Universal.

Housing of radio elements

Heating Slim Receiver Somfy RTS PlugRemote receiver for heating control (not dimmable)

BiRec HDRadio receiver for the fine-tuned dimming of the heater

Tempura Universal

Tempura Quadra Universal

BiRec On/OffRemote receiver to switch the heater on and off

Tempura Universal

28


The Stretch and OptiStretch system in comparison

The Plaza Viva Stretch and OptiStretch consist of identical frame constructions and use the same tried and tested weinor tension system with a new flat rope that winds up extremely quietly. The fabric guide is the dif-ference between the two systems. In the Stretch System, the fabric is

Plaza Viva Stretch and OptiStretchtensioned between the fabric roller bearing and the projection profile in the ascending direction, while in the OptiStretch, the fabric is addi-tionally guided sideways in the guide rail. The OptiStretch thus achieves a significantly higher degree of fabric tensioning.

Projection profile

Projection profile

Cassette

Cassette

Side channel

Side channel with fabric guide profile

Fabric gap max. 25 cm on each side

No fabric gap

The OptiStretch system

The Stretch system

Side channel

Side channel

Fabric guide profile

• Held captive on 2 sides • Inexpensive • Easy installation • Fabric gap up to 25 mm• Good fabric tautness also for

Soltis® fabrics

• Held captive on 4 sides • No edges hanging down the sides• No light gap• Soltis® fabrics are not available for

the OptiStretch version

29


Tension system

Tension system with 2 tensioned springs (number of springs depends on the projection and width)

Tension system with 1 tensioned spring (depends on projection and length of spring)

Rope block

Pulley block D39

Preloading tailRope clamp with braided sleeving

Tensioning rope

Spring cover

Tension spring

Fabric roller bearing

Rope drum

Pulley block D39

Tensioning rope

Carriage

Carriage roller D30.7/22

D39 pulley block with rope holder

Carriage roller D30.5/11.5

Rope block

Spring cover

Tension springPulley block D39

Tensioning rope

Preloading tail

Rope clamp with braided sleeving


30

Multi-section units

The maximum size of a Plaza Viva is 6000 x 5000 mm. Wider systems can be extended easily to become a multi-section unit by placing sin-gle-unit systems next to each other.The single-unit systems installed next to each other have a separate

motor drive and can thus be retract-ed and extended separately.The telescopic post can only be used on the right and left but not in the centre.

Multi-section unit

Multi-section unit with telescopic post on right and left

Sealing multi-section units

Spacing of 2 side channels

2x glazing tape 12 x 3 mm is stuck, as shown between the units along the entire length and sealed on site.

31

Multi-section units with wall offset


On request, various offset versions can be produced (e.g. wall offset).

Multi-section unit with offset (profile view)

Multi-section unit with offset (top view)

Multi-section unit with offset (profile view)

Depth left

Depth right

Right projectionLeft projection

Left

UKW

Righ

t UKW

Legend: UKW = wall bracket bottom edge

Total unit widthLeft unit width Right unit width

Offset width

Left

uni

t pro

ject

ion

Righ

t uni

t pro

ject

ion

60 x 40 angle bracket

The gap (10 – 50 mm) between wall offset and system can be covered with an angle optionally.The gap between wall and cassette can be optionally covered by a wall-mounted roof profile as well (see page 16).

Side channel right unit

Right unit

Left unit

Side channel left unit

of approx. 10 up to approx. 50


32

Full view of Plaza Viva unit overview

Top view of Plaza Viva StretchThe fabric gap at the side is up to 25 mm in the Stretch version, depending on the cassette width and the projection. There is no fabric gap in the OptiStretch version.

Plaza Viva cross sections and dimensions

Position of fixing brackets

Housing width

Proj

ectio

n

Side channel

Fabric gap up to 25 mm with Stretch version

Front profile

No fabric gap with the OptiStretch version

Width of the cassette

approx. 10% of the cassette width

approx. 10% of the cassette width

min.: 150 mm max.: 500 mm

min.: 150 mm max.: 500 mm

33


Overview of Plaza Viva unit cross sections

Plaza Viva LED cross sections and dimensions

Plaza Viva Valance Plus cross sections and dimensions

Plaza Viva with wall connection roof cross sections and dimensions


34

Plaza Viva installation

Wall mounting

Wall bracket

Wall bracket (fixed view)

Wall bracket (floating view)

Wall bracket base plate

35



Ceiling mounting

235 x 160 x 18 x 180 mm roof mounting with angle bracket, complete

235 x 160 x 18 x 180 mm angle bracket, complete (roof mounting)

Possible use on roof

View from front and rear of ceiling bracket

Ceiling angle


36


Rafter bracket installation

Rafter bracket

Rafter bracket with mounting plate and wall bracket

Adaptor plate for rafter bracket 180 x 150 x 15 mm

Mounting plate for rafter bracket 294 x 80 x 15 mm

Installation on insulated facades using Fischer Thermax 12/16

The Thermax 12/16 stand-off installation system from Fischer is suitable for insulated facades as it allows for secure fixing.

37


Special brackets

Installation with stand off bracket

Plaza Viva with stand off bracket, e.g. Installation with a pipe

Stand off bracket Stand off bracket with wall bracket

Use of stilt

Three-piece special bracket (mounting plate, stilt, wall bracket)

Use for installation on a roofX = rafter thicknessY = stilt adjustment range = (900 – rafter distance – 2x)/2Z = height of roof structure (tiles etc. …)

Installation on a roof using a stilt

200 to 300 mm gaps can be bridged using the stand off bracket.

This special bracket is used for ex-ample under roof tiles. The longer plate is mounted under the roof tiles and sealed again on site. This mounting holes are drilled on site after determining the position. Please note:

We need the house roof angle and length of the round pole (stilt) to install the stilt.

Rafter distance max. 700

Roun

d po

le le

ngth


38

Special brackets

Installation with angle bracket

Angle bracket with posts

Other application examples:

Installation of Plaza Viva laterally on a wall or in a niche

The Plaza Viva can also be mounted on a lateral wall, niche or next to a Terrazza using the 100 x 50 x 5 x 120 mm wall-mount angle bracket.

100 x 50 x 5 x 120 mm wall-mount angle bracket

100 x 50 x 5 x 120 mm angle bracket

39



Installation on a wall (without posts)

Plaza Viva installation beyond a patio roof and/or conservatory

The Plaza Viva is installed on the wall on site using wall brackets and the projection is extended (the head clearance height must be not-ed for this). With installation with-out telescopic posts, the Plaza Viva can also be fixed onto the conserva-tory using support brackets.

If there is a wall on the opposite side, it is possible to mount the Plaza Viva onto the wall without posts using adjustable support brackets.

Duofix supporting structure

Two Plaza Viva can be mounted on our Duofix supporting structure to achieve an even larger area of weather protection.


40


Post installation – standard/adjustable post plates

Foundation plan

Note The size of the foundation depends on the quality of the ground, the acting loads and the climate con-ditions (frost depth). The size specified here as-sumes unfavourable con-ditions. A smaller founda-tion may also be adequate depending on the struc-tural conditions.

Standard post plate (installation on even ground)

Adjustable post plate/for Krinner screw foundation systems (installation on uneven ground)

Post plate cover plate

Fixing options for posts

Plaza Viva width

Distance between centre lines of the foundation

Foun

datio

n sp

acin

g

Plaz

a Vi

va d

epth

41


Fixing options for posts

Screw foundation 4When fixing the posts into soil/earth they are an alternative to conventional foundation fixing. The post length as mentioned on the mounting sheet is increased by the floor level (X).

Post fixation on concrete floor slabs 1The standard configura-tion is the installation of the Plaza Viva with post plates on a given (or exist-ing) concrete floor. The finished cut length of the post is always indi-cated on the assembly sheet.

Bucket foundation 2Posts are securely fitted into a strong non moving base. The concrete is pured and set at the end of the installation, which simplifies the alignment of the posts.

Deep-seated foundation 3The easy and flexible screw attachment on a 700 (w) x 800 (h) x 700 (d) mm screw foundation is carried out like the stand-ard fixation (item 1). The reference height for the crank position as well as for the post height is always TEFF.

Mounting on wall 6When the post is mount-ed on a wall, the height of the post is reduced by the height of the wall (Y).

1 2 3 4

5

6

Mounting with angle bracket 5This post-mounting is suitable, for example, when mounting in front of a balcony or a terrace (see also page 38). The calculated post length is increased by the floor level (X).

TEFF: Top edge of finished floorX: Floor recessY: Height wall

Cran

k he

ight

2600

(Ord

er le

ngth

/nom

inal

leng

th)

Floo

r rec

ess

TEFF TEFF

TEFF

42

47 standard RAL colours

RAL 9016Traffic white

RAL 7032Pebble grey

RAL 7021Black grey

RAL 8016Mahogany brown

RAL 8014Sepia brown

RAL 7040Window grey

RAL 7039Quartz grey

RAL 6012Black green

RAL 5022Night blue

RAL 4005Blue lilac

RAL 3007Black red

RAL 1014Ivory

RAL 2011Deep orange

RAL 2000Yellow orange

RAL 1023Traffic yellow

RAL 1003Signal yellow

RAL 5021Water blue

RAL 5024Pastel blue

RAL 6005Moss green

RAL 7015Slate grey

RAL 7016Anthracite grey

RAL 7035Light grey

weinor 7319weinor grey

RAL 8001Ochre brown

RAL 8003Clay brown

RAL 9001Cream

RAL 9005Jet black

RAL 9006White aluminium

RAL 1002Sandy yellow

RAL 3002Carmine red

RAL 6011Reseda green

RAL 6009Fir green

RAL 9010Pure white

RAL 3004Magenta red

RAL 8019Grey brown

RAL 9007Grey aluminium

RAL 5005Signal blue

RAL 2002Vermilion

RAL 4006Traffic purple

RAL 5009Azure blue

RAL 5014Pigeon blue

RAL 1034Pastel yellow

RAL 8022Black brown

RAL 8017Chocolate brown

weinor 8077weinor dark brown

RAL 7030Stone grey

43


9 trend colours

Identical colours – for a perfect matchAs weinor does all the powder coating in its own workshop, you can also rest assured that different weinor products come with the same top-class colour tonality and identical gloss level.

Choose from an abundance of high-quality colours:• 47 standard RAL frame

colours, silk gloss• 9 scratchproof, resistant

trend colours with an elegant textured look

• Over 150 special RAL colours

Maximum colour safety: weinor has over 200 different frame colours for you to choose from. You can choose from diverse colours which harmonise with the architecture.

Over 200 modern FRAME COLOURS

Colour manufacturers make every effort to guarantee colour stability. Despite this, as a result of the ban on the use of heavy metals in powder coatings, it therefore cannot be excluded that colours in general, and Fire Red (RAL 3000) in particular, may fade with time. Colours may differ significantly due to the printing process.

WT 029/10797Approx.

RAL 9010

WT 029/80081Iron glimmer

effect P 7

WT 029/70786Sparkling iron

effect

WT 029/80077Approx.

DB 703 metallic

WT 029/90147Approx.

RAL 9007 metallic WT 029/60740Chestnut 04

metallic

WT 029/50704Approx.

RAL 6009 metallic

WT 029/90146Approx.

RAL 9006 metallicWT 029/71289

Approx. RAL 7016

RAL 8014Sepia brown

RAL 6012Black green

RAL 1014Ivory

RAL 1003Signal yellow

RAL 6005Moss green

RAL 8003Clay brown

RAL 1002Sandy yellow

RAL 1015Light ivory

44

coloursby weinor®

Over

150 patterns

45


Breathtakingly beautiful and long-lasting: as weinor fabrics are saturated in colour, they retain their radiance for years to come. Teflon EXTREME® finishing makes them water and soil-repellent.

Wonderful FABRICS for every purpose

Colours by weinor®: fabrics for your pergola awning

Side and vertical sun protection fabrics with a crystal-clear view

StarScreen is a textile woven fabric for a homely atmosphere. This spinneret dyed polyester fabric has a very natural textile look and feel. Now also available in exclusive melange shades.

Perluca is an attractive spinneret dyed acrylic fabric with breaks arranged at regular intervals. They ensure a constant exchange of air so that rooms do not overheat.

Soltis® is sun protection with ven-tilation. The high-tech Soltis® PVC climate-control fabric from Serge Ferrari has small pores to let more air through and allow for a better view outside.

Collection screens by weinor® – that’s 40 attractive fabrics in three different qualities, which have been specially developed for vertical privacy and sun protection.

weinor true colours is our exquisite-ly colourful acrylic fabric collection. The fabrics are outstandingly dura-ble and come in radiant colours – for beautiful patterns designed to last.

The hallmark of weinor magic colours is its vibrant patterns and high-stretch polyester which re-tracts to its original smooth state in warm conditions (weinor Memory- Effekt®).

Important:For textile sun protection: creases occur during manufacture and folding the awning fabrics. At the same time surface effects can occur in the crease, particularly in the case of light colours which appear darker against light. Folds in the hem, seam and fabric lengths occur where there are multiple layers of the woven fabric and different rolling thicknesses on the fabric roller. The re-sulting fabric tension can cause waviness (e.g. honeycomb or fish bone patterns). In principle, these effects occur to varying degrees in almost all awning fabrics. Creases and folds do not detract from the value and usability of an

awning. Awnings and conservatory awnings are sun protection devices which should be retracted when it is raining or windy. Wet fabric creases more easily and as far as possible should only be retracted after drying out (please take care in strong winds and avoid pooling).Depending on the frame colour ordered, we deliver all small parts, as well as gear handles and gear boxes for equipment with gear handle drive, in black (similar to RAL 9005), white (similar to RAL 9016), or in grey (similar to weinor 7319).

46

General terms of delivery and payment

be given as to the exact time of de-livery. Delivery dates are deemed to have been met as soon as we have indicated that the consignments are ready for dispatch.

6.2. Adherence to our obligation to deliver shall be subject to the cus-tomer meeting his/her obligations on time and in the due and proper manner as well as to the customer’s obligation to cooperate. Failure to meet the above shall result in the delivery date being extended by a reasonable amount of time. Delays in delivery at our company or our supplier’s plant which are the result of force majeure or other events beyond our control – especially strikes, lockouts, government inter-vention, riots, effects of war or acts of terror – shall entitle us to post-pone delivery by a reasonable amount of time or to withdraw from the contract. Should it prove impossible for us or our supplier to deliver or provide the service, both we and our supplier shall also be released from our obligation to de-liver or provide the service. In the event of a delay or should it be im-possible to provide the service, we shall inform the customer without delay.

6.3. Unless otherwise agreed contractu-ally in writing, and provided that it is reasonable for the customer, we shall be entitled to provide partial deliveries and partial performance.

6.4. Call-off orders, or the specification of individual partial deliveries, are, as far as possible, to be made at equal intervals, in equal quantities, and in enough time to enable due and proper manufacture and deliv-ery. Should the consignments not be called off or specified at all or not in good time, we shall be enti-tled to withdraw from the contract if the set deadline has not been met.

6.5. Should a written agreement be-tween us and the customer specify that the goods are subject to in-spection under specific conditions, the acceptance of the goods shall take place at our works. All the costs relating to the acceptance – provided that these relate to the deployment of our staff, our mate-rial and our equipment – shall be borne by us, while all travel and accommodation expenses for the person in charge of acceptance shall be borne by the customer. Should the customer fail to accept the goods for reasons within his/her control or due to any fault on his/her part, the goods shall be deemed to have been supplied in the due and proper manner upon their leaving our works.

7. Transfer of risk – Shipping/ packaging

7.1. Unless otherwise stated in the order confirmation, delivery of the goods shall be “ex works”. Our works are located in Cologne and Möckern (Germany). It is also here-by expressly agreed by the two par-ties that the Incoterm Code EXW (2010 version) shall apply.

7.2. All risks shall be transferred to the customer as soon as the goods leave our works in Cologne or Möckern. This shall equally apply when the goods are carried by our own vehicles or when we agree to take on or perform other services, most notably shipping costs or de-livery. We are under no obligation to unload the goods on behalf of the customer.

7.3. Should shipment or acceptance of the goods be delayed or not per-formed due to circumstances be-yond the control of the customer, all risks shall be transferred to the customer as soon as the customer has been notified that the goods are ready for shipment and deliv-ery. Should shipment be delayed due to or at the request of the cus-tomer, we shall store the goods at the expense and risk of the custom-er. In this instance, notification that the goods are ready for shipment

shall be equivalent to having shipped the goods.

7.4. Should we consent to the goods being returned, the customer shall bear all risks until the goods reach our works.

7.5. Should the customer request a spe-cific form of packaging, we accept no liability for the suitability of such packaging for the chosen method of delivery.

7.6. We will accept the return of trans-port and all other packaging mate-rials, as defined under the packag-ing regulations at the place of per-formance, to our works (Cologne and Möckern), after use at no charge if no other arrangements have been made. The transport costs for the return transport of the used packaging and other packag-ing materials to our works in Co-logne and Möckern shall be borne by the customer. Lattice boxes and pallets are our property and will be taken back by us at the delivery location.

7.7. On request, we will obtain trans-portation insurance, at the cus-tomer’s expense, to cover the consignment.

8. Retention of title8.1. All the deliveries made by us are

subject to retention of title. The property shall not pass on to the customer until the complete settle-ment of all open demands resulting from the mutual business relation-ship including interest and costs.

8.2. Should the goods subject to reten-tion of title be attached to any real estate by the customer to the ex-tent that they become an integral part of the property, the customer hereby transfers to us the corre-sponding, highest priority part of the claims against his client and/or the building owner together with all ancillary rights in the amount of all monies owed to us by the cus-tomer. In the event of resale, the customer shall transfer to us his/her claims against the purchaser for the same amount.

8.3. In the course of normal business, the customer shall, however, be entitled to dispose of the goods subject to retention of title and to collect the purchase price. Said en-titlement shall expire, should the customer be in arrears with pay-ments to us. In this instance, we shall be entitled to collect all the items we have already delivered. The customer hereby consents to our taking such action. The custom-er shall not be entitled to pledge or to assign by way of security the goods subject to retention of title. Should the goods subject to reten-tion of title be pledged or our rights encroached upon by any other form of third-party action, the customer must inform us with-out delay by registered mail. Any costs incurred by us as a result of our suffering enforcement or other prejudices shall be reimbursed by the customer.

8.4. The customer undertakes to obtain adequate insurance cover for the goods subject to retention of title. The customer hereby transfers to us any claims arising from such insur-ance.

8.5. At the request of the ordering par-ty, we undertake to release any securities to which we are entitled, provided the current value of our securities exceeds the claims which are to be secured by more than 10%. The decision on which securi-ties are to be released shall be at our sole discretion.

9. Assembly, assembly instructions and base/awnings and wind class, filiform corrosion and pre-anodisation

9.1. Unless otherwise agreed in writing, the assembly of the supplied goods shall not form part of the contract with the customer. The assembly work is to be carried out by our customer at his/her own risk. On

1. Scope of application 1.1. Our General Terms of Delivery and

Payment (Terms and Conditions of Business) apply exclusively to all contractual relations involving weinor and a business (customer). No terms and conditions which contradict our Terms and Condi-tions of Business, or any terms and conditions of the customer which deviate from the same, shall be ac-cepted unless confirmed expressly by us in writing. Our Terms and Conditions of Business also apply should we deliver to the customer knowing that the customer’s Terms and Conditions of Business differ from our own.

1.2. All agreements reached between ourselves and the customer aimed at fulfilling the contract drawn up between the contracting parties are to be recorded in this contract.

1.3. In addition to these Terms and Conditions of Business, the “Guide Line for the Estimation of Manufac-turer’s Information on Awning Fabrics”, excerpts of which are printed in the price list made avail-able prior to the conclusion of the contract, shall also apply.

2. Offer/drawing up of contract2.1. Our offers and all details given in

price lists, brochures, on websites, etc. are to be understood as being without commitment unless other-wise stated in the confirmation of order.

2.2. The customer’s order shall repre-sent a binding offer which we may accept in the space of two weeks of receipt by sending a written confir-mation of the order or, in the case of orders for awning fabrics, by supplying the goods in as far as our customer does not specify a longer term of acceptance.

2.3. None of the customer’s rights arising from the contract are trans-ferable.

3. Prices and price adjustments 3.1. Unless otherwise provided for in

the order confirmation, our prices shall be based on the price lists valid on the day of the order con-firmation.

3.2. Price adjustments shall be permissi-ble should more than four months pass between concluding the con-tract and the agreed date of deliv-ery. Should either wage levels or the cost of materials change after this and before the date of delivery, we shall be entitled to adjust the price in line with any increases or decreases in costs. The customer shall only be entitled to withdraw from the contract should the price rise by more than 5%.

3.3. Our prices are ex works and do not include the cost of freight, postage, packaging, insurance or any other shipping costs.

3.4. Our prices are exclusive of value- added tax at the current rate; this is to be paid at the rate applicable on the day of invoicing and will be shown in the invoice separately.

4. Terms of payment and failure to pay, payment in advance/ collateral, credit insurance, compensation and possessory lien

4.1. Payments for standard orders (phone/fax orders, etc.) which are settled in the space of 3 days using a SEPA Business-to-Business Direct Debit Mandate shall be subject to a 4% cash discount. The deadline for the pre-notification is hereby short-ened to 2 days. Any costs incurred due to the mandate being reversed or not being honoured shall be borne by the customer provided

that the reversal or failure to hon-our the mandate was not caused by ourselves. Payments effected within 10 days of date of invoice shall be subject to a 3% discount. Orders placed via the E-Shop are subject to a 5% discount provided that pay-ment is settled within 3 days using a SEPA Business-to-Business Direct Debit Mandate; a 4% discount shall apply to payments made within 10 days using a SEPA Business-to- Business Direct Debit Mandate. The terms and conditions agreed above for the pre-notification deadline and the costs for not honouring the mandate shall apply accordingly.

Invoices settled after the initial 10 days from date of invoice and with-in the period stated on the invoice are to be paid net and in full within 30 days of the date of invoice. If a SEPA Business-to-Business Direct Debit Mandate is issued but is re-versed or not honoured for reasons beyond our control, the corre-sponding invoice amount shall be-come due with immediate effect.

4.2. Should the deadline for payment be exceeded, we shall be entitled to charge interest on arrears amounting to 9 percent per an-num. The customer shall be entitled to prove that, in individual cases, either no loss or damage or a lower loss or damage has occurred. In the case of payment default, we shall not be obliged to accept orders from the customer. We shall be entitled to require payment in ad-vance or collateral before carrying out pending deliveries. This not only applies in the event of pay-ment default but also if there is a significant deterioration or consid-erable risk in the customer’s finan-cial circumstances so that the de-mand for payment of the purchase price is at risk due to the customer’s lack of financial capacity. A lack of financial capacity must be assumed, among other things, if there is suf-ficient information from a credit insurer or credit agency (e.g. credit reform). Payment in advance and collateral can also be demanded if enforcement proceedings have already been initiated against the customer.

4.3. The customer shall not be entitled to offset outstanding payments with counterclaims unless these are legally adjudicated (res judicata), are undisputed or have been ac-cepted by us. The customer shall furthermore only be entitled to re-fuse performance until coun-ter-performance has been effected if the counterclaim is founded on the same contractual relationship.

4.4. Should the customer fall into ar-rears with payments, we shall be entitled to retain up to half of the customer’s valid or agreed rebates and to set these off against the most overdue payment claims in such a way that the principal claim is settled first, followed by the interest due and then the costs incurred.

5. Consent to electronic invoicing We shall be entitled to issue invoic-

es electronically. Our customer hereby expressly consents to receiv-ing invoices electronically.

6. Delivery and call dates; acceptance of delivery

6.1. Delivery dates are only approxi-mate dates. Agreements relating to delivery dates are not fixed delivery dates unless these have been ex-pressly confirmed as such by us in writing. Should a fixed delivery date be agreed, no guarantees can

weinor GmbH & Co., registered offices: Cologne, Germany; registered with the Commercial Register of Cologne under the number HRA 5676; individually liable partner: weinor Beteiligungs- GmbH, registered offices: Cologne, Germany. Registered with the Commercial Register of Cologne under the number HRB 4661, Managing Director: Thilo Weierman.

47

General terms of delivery and payment

for damages for loss of income. Liability in the event of careless in-fringement of a material contractu-al obligation (cardinal obligation) shall be limited to the amount of foreseeable damage typical for the contract in question. Furthermore, we shall be liable in accordance with the statutory provisions to the extent that the customer should claim for any damages which are based on wilful intent or gross neg-ligence on our part, including wil-ful intent or gross negligence on the part of our representatives or agents. Liability for culpable loss of life, limb or health shall remain un-affected; this shall also apply to any mandatory liability arising from the product liability law. The above shall also apply to the reimburse-ment of expenses. The exclusion of liability shall equally not apply to any assumed guarantees or any guaranteed characteristics should a defect covered by either of these give rise to a claim for which we are liable. All claims resulting from re-course against the manufacturer or the supplier shall also remain un-affected.

10.5. No warranty is given for damage resulting from the following: un-suitable or improper usage; faulty assembly by the customer or a third party; non-adherence to our oper-ating and service instructions; arbi-trary changes to the products; re-placement of parts or use of con-sumables not in compliance with the original specifications; replace-ment of materials; normal wear and tear; filiform corrosion, to the extent that we had not been asked to pre-anodise the parts in ques-tion or done so; faulty or negligent operation; inappropriate fuels; in-adequate construction work; un-suitable base; chemical, elec-tro-chemical or electrical factors in-sofar as these are beyond our control; improper adjustment or corrective maintenance work car-ried out by the customer or a third party without our prior consent.

10.6. No claims arising from faulty partial deliveries shall be applied to the other remaining partial deliveries.

10.7. The limitation period for claims based on defects shall be 24 months from the transfer of risk. In all other respects, the statutory war-ranty conditions shall apply.

11. Patents Should a third party claim against

the customer or the customer him/herself claim for an infringement of his/her industrial property rights regarding the delivered products, the customer undertakes to inform us of this immediately. We shall be entitled but not obliged to con-duct, at our own expense, all nego-tiations relating to an out-of-court or court settlement and/or legal action covering the infringement of industrial property rights relat-ing to the delivered products. The customer shall be obliged to assist us and to transfer the relevant powers of attorney. No liability for damage arising from infringements of patents shall be accepted.

12. Images, photographs, drawings12.1. If and to the extent that we pro-

vide a customer with images, pho-tographs or drawings which the then uses, for example, on the in-ternet, or in leaflets, brochures or similar advertising media, the cus-tomer shall be obliged to indicate the origin/authorship of such im-ages, photographs or drawings, for example by adding a remark below or on the image, photo or drawing such as “Copyright weinor” or the corresponding symbol © in con-junction with the company name weinor. If we have included a year, this must also be added after the reference to our copyright. If we provide images, photographs or drawings to which we do not own the copyright but merely the right

to use such images, photographs or drawings, we shall make this known to the customer. The use of such items shall be at our customer’s risk.

12.2. The images, photographs or draw-ings to which we own the copy-right shall remain weinor’s proper-ty. Such materials will only be pro-vided to the customer on a loan basis and may only be duplicated, reproduced, copied, stored or passed on to third parties as part of the business relations with weinor and for the purpose of advertising our products in the corresponding manner. The images, photographs or drawings may not be edited or otherwise amended – whether through photocomposition, mon-tages, electronic tools or any other forms – without our written con-sent. This especially applies to digi-tal graphical materials. The copying or redrawing, reconstruction or re-taking of photographs is equally not permitted without our written consent.

12.3. If and to the extent that the customer provides us with images, photographs or drawings, the customer hereby warrants that no third-party copyrights to such images, photographs or drawings are affected in any way, and hereby releases us from any and all costs and damage claims which may arise due to an infringement of copyrights to the images, photo-graphs or drawings which the customer provides.

13. Place of fulfilment/court of jurisdiction/choice of law

13.1. Unless otherwise provided for under this contract, the place of fulfilment and payment shall be our registered offices in Cologne, Germany.

13.2. If the customer is a business person, the court of jurisdiction shall be our registered offices in Cologne, Germany.

13.3. The laws of the Federal Republic of Germany shall apply, to the exclu-sion of the EU Sales Convention.

14. Final provisions Any amendments and additions to

this agreement shall only apply if made in writing. For its part, the re-quirement to have all agreements in writing may only be waived by written agreement. These new terms and conditions of delivery and payment supersede all previ-ous versions.

Mathias-Brüggen-Straße 110 50829 ColognePostfach/P.O. Box 301473 50784 CologneGermany

request, we shall also assist our cus-tomer through training courses or other assistance. The provision of such assistance shall not imply any changes to the customer’s obliga-tion to carry out the assembly work him/herself.

9.2. Our assembly instructions and our verbal or written advice on using our products are intended to pro-vide the customer with information on the best possible use of our products and services. They are not intended to release the customer from his/her duty of due diligence to ascertain whether our goods and services are suitable for the in-tended purpose. This applies espe-cially to information about the de-sign and quantity of the required brackets and testing the load bear-ing capacity, as well as the nature of the assembly base, and the dis-closure of such information to us when placing the order. Should the customer not provide any details about the brackets or the assembly base when placing his/her order, we shall supply brackets of a design and in a quantity suitable for instal-lation on concrete with a covering of up to 20 cm (non-pressure-resist-ant base) for wind resistance cate-gory 2. Consequently, should it not be possible to use the product as set out in the agreement because of inadequate or inaccurate informa-tion being provided by the custom-er, we shall only be liable should we or our employees have acted with intent or gross negligence.

9.3. Given the complexity of the inter-action between building materials, tools and fastening elements, we recommend that customers inform and assure themselves of the spe-cific building conditions, especially static conditions, at the site in ques-tion. This applies especially to test-ing the load bearing capacity and the nature of the assembly base. Since we never carry out any instal-lation work for the customer and only supply the goods to a custom-er’s order, we accept no liability in this regard.

9.4. Our awnings comply with the re-quirements of wind resistance cate-gory 2. This presupposes that the awning is installed by our customer in a proper manner not otherwise involving any technical defects. At the same time, this presupposes that the awning is installed using the type and quantity of brackets recommended by the manufactur-er, that the strength of the dowels prescribed by the manufacturer has been taken into account during the installation work and that the manufacturer’s instructions con-cerning dowels are followed during assembly.

9.5. Unless otherwise agreed in writing, awnings delivered by us are de-signed for fitting with a revision appliance accessible from the out-side. If the awning is affixed to the cladding in such a way that the re-vision cannot be attached from the outside, we shall, in the event that the awning has defects, not be liable for costs connected to the opening up and sealing of the clad-ding associated with the removal of defects of the awning delivered. This shall also apply in a case of warranty claim. The customer must inform the final customer of the need for a revision appliance to be manufactured which is accessible from the outside.

9.6. Important information on filiform corrosion (= growth of traces of fibrous corrosion under painted surfaces which, under certain con-ditions, may be brought about by the moisture and electrolyte con-tent in the atmosphere, e.g. in coastal areas): The customer is hereby advised that, based on the best available technology, filiform corrosion in powder-coated alu-minium parts/other painted com-ponents can only be reduced if the long sections have undergone an

anodisation process. This does not apply to small parts. The pre-anodi-sation does not mean that the in-spection of whether our product is resistant to a maritime climate can be dispensed with. This also applies to excessive sanding.

The utilisation risk shall be borne by the customer.

10. Warranty/obligation of inspection and of notification of defects in writing/compensation for damage

10.1. Variations in colour, design, etc. which are normal in the trade are not defects. The same applies to deviations in our products from samples or patterns. We warrant that the products are free from manufacturing defects and defects in the material and that any assem-bly work insofar as it is, in excep-tional cases, carried out by our-selves or by a company instructed by us, shall be carried out properly. However, we give no guarantees that the design and make-up of the ordered items comply with the pro-visions under public law for the intended purpose.

10.2. Upon delivery, the goods should be inspected immediately to ensure that they are as ordered and should be checked for defects. Such checks must be carried out at the latest on our customer’s premises. Should the customer arrange for delivery to be made to a third-party loca-tion, e.g. the customer’s home, all risks arising from direct delivery shall pass to the customer as soon as the consignment has left the supplier’s works. Faults must be re-ported to us in writing without de-lay and received by us no later than 8 days after delivery. Faults which only appear during the period of guarantee shall be subject to the same procedure and period of notice. The period of notice shall commence on the day the defect occurs. Failure on the part of the customer to comply with the obli-gation to examine and to lodge a complaint about faults shall invali-date the warranty.

10.3. In the event of improper delivery, providing that the customer has fulfilled his/her obligation of in-spection and of notifying defects in writing, as set out in Section 377 HGB (German Commercial Code), we shall be liable as follows: Should there be a defect in the purchased item, we shall, at our discretion, be entitled to rectify the defect or to supply a fault-free product (reme-dy). We shall only be liable if the defect is substantial. Should either or both types of remedy be impos-sible or unreasonable, we shall be entitled to refuse to provide a rem-edy. We shall also be entitled to refuse to provide a remedy so long as the customer fails to make pay-ments corresponding to the fault-free portion of the service. Should remedy be impossible or ineffec-tive, the customer has the option of reducing the purchase price to an appropriate level or of withdraw-ing from the agreement as provid-ed for in law. This shall apply espe-cially to any culpable delay of or refusal to provide a remedy as well as to cases where a remedy has failed a second time. In addition to the above, reference is made to the special conditions for awning fab-rics which are also part of our con-tractual relationship.

10.4. Notwithstanding any agreements to the contrary below, no other customer claims shall be accepted irrespective of the legal basis (espe-cially claims for damages arising from an infringement of ancillary obligations under the contract; un-lawful acts, or any other tortious liability and claims for reimburse-ment of expenses, with the excep-tion of those set out in Sect. 439 Para. 2 BGB (German Civil Code)). This applies especially to claims for damages not directly related to the purchased item as well as to claims W

e re

serv

e th

e ri

ght t

o m

ake

tech

nica

l and

pri

ce-r

elat

ed c

hang

es a

s w

ell a

s ch

ange

s in

rang

e an

d pr

oduc

t por

tfol

io. F

or te

chni

cal r

easo

ns, t

he c

olou

rs m

ay a

ppea

r slig

htly

diff

eren

t whe

n pr

inte

d.

200/

0917

/122

565-

0000

Z

Patio roof with SUPER LITE

fixed glazing

AwningAwning

with Valance Plus and Tempura

Awning with Valance Plus

and Paravento

Pergola awning Plaza Pro

with Paravento and VertiTex

Terrazza patio roof

with Sottezza II sun protection

Pergola awning Plaza Viva

and Paravento

Glasoase® with conservatory awning

and all-glass elements

AWNINGS

PATIO ROOFS AND GLASOASE®

Premium qualitymade in Germany

CUSTOMISED, SYSTEMISED SOLUTIONS

Pergola awning PergoTex II

and Tempura

PERGOLA AWNINGS

Awnings Patio roofs Glasoasen®