Product Showcase Polishing and Buffing

Additional free information on any of these items can be obtained by circling the appropriate number on the reader service card.

Deburring Transmission Parts Harper Surface Finishing Systems Inc. Meriden, Conn.

This machine deburrs an input nut flange of a trans- mission part utilizing an indexing rotary table with six power driven spindles. Three buffing heads utilizing a variety of nylon monofilament brushes deburr the helical hob spline end at the minimum rate of 160 pieces per hour. The machine is equipped with an automatic pick- and-place unit, coolant delivery and recovery system, and state-of-the-art electronics.

Circle 100 on reader information card Circle 102 on reader information card

White Rouge Polishing and Buffing Machines

Formax Corp. Munson Machinery Co. Inc., Finishing Div.

Grand Rapids, Mich. Utica, N. Y

C-170 White Lightning Rouge color buffs stainless steel to a mirror-bright finish after the metal has been buffed down smooth with a stainless steel buffing com- pound. C-170 is also used to color buff chromium plated work to a higher and brighter luster and to remove stains and frosted burn marks caused by overplating. Each bar is 2 in. X 2 in, X 10 in. and approximately z3/4 lbs.

Munson Machinery Co. Inc. offers a complete line of polishing and buffing lathes, abrasive belt lathes, semi- automatic high-pressure workholders, contact wheels, and backstands and guards.

Circle 101 on reader information card

NBD Pleated Buff JacksonLea, A Unit of Jason Inc. Conover, N. C.

The combination of buff construction, treatment, and the consequential smoothing process provides this long- life buff the dual capabilities of an aggresive cut and dark depth of color. Features include the opportunity to replace sisal buffs in finishing applications, efficient compound use, and the formation of a wide buff face with fewer plies.

Circle 103 on reader information card

22 0 Copyright Elsevier Science Inc. METAL FINISHING ?? DECEMBER 1996