Auditorium Akademi Hevea MalaysiaMalaysian Rubber Board (LGM), RRIM Experimental StationSungai Buloh
Date12 September 2013(Thursday)
VenueAuditorium Akademi Hevea MalaysiaMalaysian Rubber BoardRRIM Experimental Station47000 Sungai Buloh, Selangor.
Time8.00 am -1.00 pm
MRB - MAIJOINT SEMINAR ON
RUBBER APPLICATIONS INTHE AUTOMOTIVE INDUSTRY
IntroductionThe Malaysian Rubber Board (MRB) in collaboration with the Malaysia Automotive Institute (MAI) will organise a half-day seminar on rubber applications in the automotive industry.
The seminar will be a good platform to enhance understanding and awareness on applications of rubber in the automotive industry as well as services provided by MRB to support the automotive industry. In addition, a roadmap for rubber automotive parts and programmes established by MAI will be presented to participants.
The seminar will also include a technical visit (optional) to the Rubber Technology Centre (RTC) of MRB to provide some insights into R&D and testing facilities available in MRB.
Objectives1. To enhance understanding and awareness on R&D
programmes, testing and support services by MRB.2. To enhance understanding of rubber automotive
parts roadmap toward 2020 as established by MAI.3. To propose a collaborative programme involving
MRB, MAI and industry which can be developed into a new EPP under the NKEA on rubber, if appropriate.
FeeFree of charge
Map To Akademi Hevea Malaysia, RRIM Sg BulohGPS Coordinate: N 03° 09.674’ E 101° 33.360’
Exit Sg Buloh
KUALA LUMPUR/JALAN DUTA
Exit KotaDamansara
SUBANG JAYA/PJ
SHAH ALAM/BUKIT JELUTONG
KOTA DAMANSARA
MUTIARA D’SARA/D’SARA PERDANA
Shell
PetronasEsso
McD
1 Utama
Caltex
Shell/7 Eleven
Up TownD’ Kota
Pusrawi
SegiCollege
Kem Askar
RAHMAN PUTRAKEPONGSG BULOH
SUBANGBESTARI
KG MELAYUSUBANG
Subang AirportTerminal 3
Pencala Link
Auditorium Akademi Hevea MalaysiaMalaysian Rubber Board (LGM), RRIM Experimental StationSungai Buloh
REGISTRATION FORMMRB-MAI JOINT SEMINAR ON RUBBER APPLICATIONS IN THE AUTOMOTIVE INDUSTRY12 September 2013
No Name Designation Tel & Email Please tick if you would like to join the visit to RTC
1
2
3
4
Company Name & Address:
Programme8.00 – 9.00 amRegistration and Breakfast
9.00 – 9.10 amWelcome Note by Mr Mohd Madani SahariCEO, Malaysia Automotive Institute (MAI)
9.10 – 9.20 amOpening Speech by Datuk Dr Salmiah AhmadDirector General, Malaysian Rubber Board (MRB)
9.20 – 9.40 amPaper 1R&D Programmes and Services by MRB to Support Automotive IndustryDr Zairossani Mohd NorDirector, Technology & Engineering Division, Malaysian Rubber Board (MRB)
9.40 – 10.00 amPaper 2MRB’s Downstream Technical Advisory Services : A5 & A6 ProgrammeDr Mohamad Asri AhmadHead, Product Testing & Calibration Unit, Malaysian Rubber Board (MRB)
10.00 – 10.20 amPaper 3G-TACR : One Stop Centre for Rubber Testing & ConsultancyDr Rosmahani Che IsaManager, Global Testing and Consultancy for Rubber (G-TACR)
10.20 – 10.30 amTea Break
10.30 – 10.50 amPaper 4Automotive Rubber Component Roadmap Towards 2020Mr Mohd Madani SahariCEO, Malaysia Automotive Institute (MAI)
10.50 – 11.10 amPaper 5Sustainable of Manufacturing with Lean Production System and Automotive Supplier Excellence ProgrammeMr Mohd Zaki Abdul KadirManager, Supply Chain Development, Malaysia Automotive Institute (MAI)
11.10 – 11.30 amPaper 6Title to be confirmedNorthern Corridor Implementation Authority (NCIA)
11.30 – 12.00 pmQ&A
12.00 – 1.30 pmLunch & Networking SessionEnd of Programme
1.30 pmOptionalVisit to Rubber Technology Centre (RTC)
Enquiries/RegistrationMRBMr Hasnan Anuar/Mrs Farinie SharatolTel : 03-61459416/61459418Fax : 03-61576525Email : [email protected] / [email protected]
MAIMr Ahmad ZakkieH/P : 013-2783933Fax : 03-83187743Email : [email protected]
Closing Date: 10 September 2013 (Tuesday)
MRB & MAI reserve the right to cancel/reschedule the programme. Participants will be informed of any changes.
Recommended
