MK POLYESTER RESIN CO.,LTD.
MK POLYESTER RESIN was founded in 2002 which located in 27/12 Moo1 Bangnamjued, Samutsakhon, Samutsakhon, 74000 Thailand.
Till now, it has a history for almost 40 years. MK POLYESRER RESIN has become the leading supplier of raw material completely for Casting and Fiberglass products.
We are exclusive agent of AkzoNobel to supply Butanox M‐50 and Butanox M‐60 in Thailand.
Because of our experience, we choose the best product and the best price for customers
We understand that the quality and price are important factors of purchasing decision for our clients .
Our services include seminar and give counsel. Hope we can work together for our future. Tomorrow is answer today.
3MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
UNSATURATED POLYESTER RESIN FOR FRP
VIAPAL VUP 355E/66
• General purpose FRP process• Base on Orthophthalic acid• Non promote.• Viscosity 210 – 270 mPa.s• Non thixopropic.• Non wax.• Gel time about 4‐12 min.
R MK 753
ER 2595i
4
• General purpose FRP process• Base on Orthophthalic acid• Non promote.• Viscosity 800 ‐ 1000• Non thixotropic.• Non wax.• Gel time about 5‐8 min.
• General purpose FRP process• Base on Orthophthalic acid• Non promote.• Viscosity 800 ‐ 950• Non thixotropic.• Non wax.• Gel time about 13‐18 min.
DS 663
• General purpose FRP process• Very good for winding glass fibers reinforced
• Good water resistance • Base on DCPD type• Non promote• Viscosity 500 ‐ 800• Gel time about 7‐10 min.
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
230 kg
R MK 999
• General purpose FRP process• Base on Orthophthalic acid• Non promote.• Viscosity U ‐W• Non thixotropic.• Non wax.• Gel time about 5‐8 min.
230 kg 230 kg
ESTAR R 135 NNN
• General purpose FRP process• Base on Orthophthalic acid• Non promote.• Viscosity 13 – 17 Poise• Non thixopropic.• Non wax.• Gel time about 5‐12min.
230 kg
230 kg 220 kg
230 kg
R MK 754
• General purpose FRP process• Base on Orthophthalic acid• Promote.• Viscosity 300 ‐ 450• Thixopropic.• Non wax.• Gel time about 20‐35 min.
MK 399
• General purpose FRP process• Base on Orthophthalic acid• Promote.• Viscosity 300 ‐ 400• Thixopropic.• Non wax.• Gel time about 20‐25 min.
5MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
UNSATURATED POLYESTER RESIN FOR FRP
ESTAR R 235 TPN SMF‐7213‐CN• General purpose FRP process• Base on Orthophthalic acid• Promote.• Viscosity 2.0 – 5.0• Thixotropic.• Non wax.• Gel time about 20‐45 min.
• General purpose FRP process• Base on Orthophthalic acid• Promote.• Viscosity 3.0 – 6.0• Thixotropic.• Non wax.• Gel time about 15‐25min.
ER 2117 PT VIAPAL@VUP 9043/58
• General purpose FRP process• Base on Orthophthalic acid• Promote.• Viscosity 300 ‐ 400• Thixopropic.• Non wax.• Gel time about 20‐25 min.
• General purpose FRP process• Base on Orthophthalic acid• Promote.• Viscosity 80 ‐ 100• Thixotropic.• Non wax.• Gel time about 15+‐6 min.
ESTAR R 127 TPN ESTAR R 290
• General purpose FRP process• Base on Orthophthalic acid• Promote.• Viscosity 3.0 – 5.0• Thixotropic.• Non wax.• Gel time about 15‐30min.
• Excellent chemical resistance.• Base on Isophthalic acid• Promote.• Viscosity 5.0‐6.0 Poise• Thixotropic.• Non wax.• Gel time about 30‐50 min.
220 kg 220kg /230 kg
230 kg 230 kg
220 kg 210 kg
ESTAR H 6651 T
• Excellent chemical resistance.• Base on Vinyl ester • Non‐Promote.• Viscosity 4.0 – 8.0 poise• Non thixotropic.• Gel time about 20‐40 min.
• Excellent chemical resistance.• Base on Epoxy Vinyl ester.• Promote.• Viscosity 4.0 – 8.0 poise• Non thixotropic.• Gel time about 20‐40 min.
ESTAR H 6652 PT
200 kg 200 kg
6MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
UNSATURATED POLYESTER RESIN FOR FRP
• Excellent chemical resistance.• Base on Bisphenol A type Epoxy Vinyl ester.
• Non promote.• Viscosity 350 +/‐ 100 (cps)˟2• Non thixotropic.• Non wax.• Gel time 3 kind 10‐20 min.
20‐30 min.45‐75 min.
SWANCOR CHEMPULSE 901
Check ratio on Datasheet ofSWANCOR CHEMPULSE 901
• Formulations are based 6% Cobalt Octoate (CoOct),MEKP(9.8% active oxygen), 100% dimethylaniline(DMA),and 100% 2,4‐pentanedione(2,4‐P)
20 kg /200 kg
• Excellent chemical resistance.• Base on Vinyl ester resin• Promote.• Viscosity 350 ‐ 550 (cps)˟2• Non thixotropic.• Non wax.• Gel time 3 kind 30‐40 min. (25°C, 55%MEKPO: 1.0phr)
SWANCOR CHEMPULSE 901‐P
200 kg
ETERSET 2960 P‐5
• Excellent chemical resistance.• Base on Epoxy‐Base Vinyl ester resin. • Promote.• Viscosity 350‐450 poise• Non thixotropic.• Gel time about 28‐33 min.
200 kg
7MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
UNSATURATED POLYESTER RESIN FOR CASTING
POLYLITE PC 600S R MK 456
• General casting process.• Good for clear casting.• Base on Orthophthalic acid• Non promote.• Viscosity 8.0 – 12.0• Gel time about 8‐10 min.
• General casting process.• Base on Orthophthalic acid• Non promote.• Viscosity 700 ‐ 1000• Gel time about 5‐9 min.
R MK 457 VIAPAL@VUP 240 BE
R MK 111 POLYLITE FG‐208
• General casting process.• Base on Orthophthalic acid• Non promote.• Medium viscosity• Gel time about 8‐10 min.
• Clear casting process.• High quality for casting resin.• Base on Orthophthalic acid• Promote.• Viscosity 190 ‐ 240• Gel time about 50+‐10 min.
• General casting process.• Good for clear casting.• Base on Orthophthalic acid• Promote.• Viscosity 700 ‐ 1000• Gel time about 13‐20 min.
• Flexible resin.• Low shrinkage.• Base on Isophthalic acid• Non promote.• Viscosity S ‐ U• Gel time about12‐20 min.
230 kg 230 kg
230 kg 230 kg
230 kg 20kg / 230 kg
SMG‐9600
• General casting process.• Good for clear casting.• Base on Orthophthalic acid• Non promote.• Viscosity 8.0 – 12.0• Gel time about 4‐6 min.
8MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
EPOXY RESIN PU FOAM
• Epoxy resin.• High quality.• Good for laminate.• Good for casting.• Medium viscosity
• Polyurethane foam.• High quality.• Growth rate about 23 times.
5 kg 5 kg
UNSATYURATED POLYESTER RESIN FOR LAMINAT
MK‐5757
• Excellent laminate.• Excellent gloss • Base on Orthophthalic acid• Promote.• Viscosity 700‐1000• Suitable for coating decorative plywood
• Gel time about 4‐6 min.
Laminateresin
SPACIAL RESIN
VIAPAL UP 001/66
• General purpose FRP process• Base on Orthophthalic acid• Suitable for make a Boat.• Non promote.• Viscosity 210‐270• Non wax.• Gel time about 8‐16 min.
230 kg
Specialfor make a boat
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
FIBERGLASS
CHOPPED STRAND MAT
• General purpose FRP process• High quality.• Suitable for hand lay up.• E glass.• Size number : 300, 450, 600
SURFACING MAT
• Use to close a fiberglass.• High quality.• Suitable for hand lay up and RTM process.
• Size number : 10,20,30
GLASS FABRIC WOVEN ROVING
• General purpose FRP process• High quality.• Suitable for hand ray up.• E glass.• Size number : 100,200
• Use to close a fiberglass.• High quality.• Suitable for hand lay up and RTM process.
• Size number : 400,600,800900,1000,and 1200
ROVING FOR FILAMENT ROVING FOR SPRAY UP
• For Filament process.• High quality.• E glass.• Size number : 1200, 2400 and 4800
• For Spray up process.• High quality.• E glass.• Size number : 1200, 2400 and 4800
CHOPPED STRAND CARBON FABRIC
• Fore FRP process.• High quality.• E glass.• Size number : 3 mm. , 6 mm. and 9 mm.
• Carbon fabric• High quality.• Suitable for a strength reinforce.• Have a plain weave and twill weave.
30 kgroll 200 meter / roll
#100=250 m./roll#200=200m./roll 40 kg /roll
About 17‐20kg/roll
Begin 1kg Begin 1 meter ( wide 150 cm. )
About 17‐20kg/roll
9
GELCOAT
GELCOAT 9091
• Gelcoat for FRP process.• Water resistance.• Good surface hardness.• Base on Orthophthalic acid• Thixotropic.• Non promote.• Medium viscosity• Gel time 6‐14 min.
• Gelcoat for FRP process.• Good resistance against UV‐light good water resistance.
• Base on Orthophthalic acid• Thixotropic.• Non promote.• Medium viscosity• Gel time 6‐14 min.
GELCOAT 9091 S
GELCOAT 2010
• Gelcoat for FRP process.• Water resistance.• Good surface hardness.• Base on Orthophthalic acid• Thixotropic.• Non promote.• Medium viscosity• Gel time 6‐14 min.
GELCOAT 9094 GELCOAT 920 BSE
• Gelcoat for FRP process.• Water resistance.• Good surface hardness.• Base on Orthophthalic acid• Thixotropic.• Non promote.• Medium viscosity• Gel time 6‐14 min.
• Gelcoat for FRP process.• For protective and decorative finishes on GR‐UP laminate.
• Base on Isophthalic acid• Thixotropic.• Preaccelerated.• Medium viscosity• Gel time 6‐14 min.
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
TOOLING GELCOAT
• Gelcoat for FRP process.• High chemical resistance.• Good surface hardness.• Base on Viny ester• Thixotropic.• Non promote.• Medium viscosity• Gel time 6‐14 min.
25 kg 25 kg
25 kg 25 kg
25 kg 20 kg
10
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
CATALYST
DMA
BUTANOX M 60
• MEKP for mix in resin to make a hardness.
• High quality• High safety
BUTANOX M 50
• MEKP for mix in resin to make a hardness.
• High quality• High safety
BUTANOX M 60 ( 30 Kg.)
• MEKP for mix in resin to make a hardness.
• High quality• High safety
MEPOXE M
• MEKP for mix in resin to make a hardness.
• High quality• High safety
COBALT 10% RP‐51
• Accelerator content 10%• For FRP casting ,fillercasting and color casting.
• High quality
• Accelerator content 3%• For clear casting• High quality
PROMOTER A DMA
• Promoter content 1%• For button casting• High quality
• The special acceleraterfor use to mix in bisphenol and vinyl ester.
• High quality
5 kg 5 kg
30 kg 5 kg
4 kg / 15 kg / 200 kg 4 kg / 15 kg
15 kg 5 kg
11
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
SILICONE RUBBER
SILICONE MK 585 SILICONE MK 586
• Silicone rubber for molding.• Viscosity 40,000‐45,000• Hardness ( shore A ) 26+‐2• High quality.
• Silicone rubber for molding.• Viscosity 45,000‐50,000• Hardness ( shore A ) 24‐25• High quality.
SILICONE MK 303 ELASTOSIL 4503
• Silicone rubber for molding.• Viscosity 38,000‐40,000• Hardness ( shore A ) 25• High quality.
• Silicone rubber for molding.• Viscosity 45,000• Hardness ( shore A ) 25• High quality.
SILASTIC 3481 SILASTIC 3483
• Silicone rubber for molding.• Viscosity 25,000• Hardness ( shore A ) 21• High quality.
• Silicone rubber for molding.• Viscosity 20,000• Hardness ( shore A ) 13• High quality.
RUBBER TREE
• Silicone rubber for molding.• Air dry.• High quality.
25 kg 25 kg
25 kg 20 kg
20 kg 20 kg
20 kg
12
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
SOLVENT
STYRENE MONOMER ACETONE
• Mix in resin for dilute resin and gel coat
• High quality.
• Use for cleansing resin and equipments.
• High quality.
THINER AAA THINER AA
• Use for cleaning resin and equipments.
• Suitable for mix in colors.• High quality.
• Use for cleaning resin and equipments.
• High quality.
MONOWAX CAUSTIC SODA
• Use for cleansing resin and equipments.
• Suitable for mix in colors.• High quality.
• Mix in water for cleaning surface products and to removes stains.
• High quality.
180 kg 160 kg
5 kg 25 kg
Drum Drum
13
MOULD RELEASE
TR 104 TR 1000P
• Mold release. highestquality and excellent release
• The wax color is blue.• Easy to used.
• Mold release. highestquality and excellent release
• The wax color is cream.• Easy to used.
PVA
PVA
• Mold release. • Water base .• Easy to used.
CANA CREAM
• For clean surface car and fiberglass products..
• High gloss.• Easy to used.
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
1 can =14 OZ. 1 can = 15 OZ.
5 kg
1 can = 220 g
VASELINE
• Mold release.• Easy to use.
1 kg
TR 216
• Mold release. highestquality and excellent release
• Liquid mould release• Easy to used.
14
FILLER
CALCIUM 9QQ
• Mix in the resin• For make a filler.• suitable for filler casting.• 325 mesh.
CALCIUM 28X
• Mix in the resin• For make a filler.• suitable for filler casting.• 325 mesh.
TALCUM TALCUM APDD
• Mix in the resin• For make a filler.• suitable for FRP & Casting.• 325 mesh.
• Mix in the resin• For make a filler.• suitable for FRP & Casting.• 325 mesh.
CAB‐O‐SIL ( WACKER )
• Mix in resin for make a thixotropic and make gel coat.
• Suitable for FRP.
CAB‐O‐SIL ( M‐5 )
• Mix in resin for make a thixotropic and make gel coat.
• Suitable for FRP.
TITANIUM
• Mix in resin for make a white and easy to polish.
• Suitable for casting resin.
MICRO BALLOON
• Mix in the resin• For make a filler.• Make a light weight and strong surface.
• Suitable for FRP.
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
25 kg 25 kg
25 kg 25 kg
10 kg 10 kg
25 kg 27.5 kg
15
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
FILLER
GYMSUM PLASTER
GYPSUM PLASTER
• For casting and for make a mould.
• High quality.
GYPSUM PLASTER
• For casting and for make a mould.
• Slowly to dry.• High quality.
• For casting and for make a mould.
• High quality.
25 kg 25kg
25 kg
16
ACCESSORY AND EQUIPMENT
SHEEP WOOL ROLLER SYNTHETIC WOOL ROLLER
HANDLE ROLLER BRISTER ROLLER
• Dip in resin and pain on mould or fiberglass.
• Size 4 inch and 6 inch.• High quality.
• Dip in resin and pain on mould or fiberglass.
• Size 4 inch and 6 inch.• High quality.
• The handle roller of sheep wool roller and white roller.
• High quality.
• Roller on fiberglass for attack bubbles.
• Size 4 inch and 5 inch.• High quality.
HANDLE OF SYNTHETIZE WOOL ROLER ALUMINIUM ROLLER
PIGMENT ( MATAPEL) PIGMENT ( VIGA )
• The handle roller of Synthtize wool rollers.
• High quality.
• Roller on fiberglass for make asmooth surface and attack a bubbles.
• Size 2 inch and 4 inch.• High quality.
• Use to mix in resin for make a color.
• Liquid type.• High heat resistance • Non toxic • Free solvent • High quality.
• For make a thickness of fiberglass products.
• Size 6mm. , 10mm., 15mm. and 20mm.
• High quality.
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
1kg / 5 kg / 25 kg 1kg / 5 kg / 25 kg
17
ACCESSORY AND EQUIPMENT
HARD CLAY
• For sculptures and elements for make a mould
• Packaging 5 kg.• High quality.
SORFT CLAY
COTTON MAT
• The elements for make a silicone moulds.
• Size 6 inch and 9 inch.• High quality.
• UP resin for FRP• Suitable for hand lay up• Orthotropic type• Non promote • Medium viscosity
POLISHIG
• For sculptures and elements for make a mould
• Packaging 5 kg.• High quality.
WAX PAIL
• Production of zinc and a good Rust coating.
• for keep any raw material.• Capacity 20 liters.• High quality.
PAINT BRUSH
• For pain a color and resin.• Size 2 inch, 2.5 inch and 3 inch.
• High quality.
SILICONE OIL
• Mix in silicone for make a low viscosity and for make a soften silicone.
• High quality.
• For sculptures to make a prototype.
• Packaging 5 kg.• High quality.
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
5 kg / piece 24 piece / package
5 kg
3‐4 kg / piece
18
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
ACCESSORY AND EQUIPMENT
• Spray for FRP work, metal workwood work and automobile.
• Gravity feed type.• The spray partway is made of stainless.
• Nozzle 2.5 mm. made of stainless.• High quality
• Spray for Gelcoat and glue.• For high viscosity spray painting.• Pressure feed type.• Nozzle 2.5 mm. made of stainless.• Save time to work.• High quality
HAND SPRAY GUN R‐871 +W/CUP
HAND SPRAY GUN X 202 –G25
HONEY COMB
• For make a thickness of fiberglass products.
• Size 6mm. , 10mm., 15mm. and 20mm.
• High quality.1 piece ( size : 115cm. X 230 cm.)
PORTABLE ELECTRIC SCISSORS
• Use for cutting fiberglass, cloth, carbon fabric, paper etc.• Save time make more value.• High quality.• Easy to use• Can use direct to electric and use by battery.
COREMAT ( UPICA MAT )
• For make a thickness of fiberglass products.
• Size 3mm. , 4mm., 5mm.( thickness )
• High quality.
19
20
BIO CLEAN ING AND TREATMENT
MK POLYESTER RESIN CO.,LTD. 27/12 MOO 1 BANGNAMJUED, SAMUTSAKHON, SAMUTSAKHON 74000 THAILAND.TEL : +66 34 441 544, +6634 813 995 FAX : +6634 813 831www.mkresin.com
SURFACE CLEANER F.O.G DIGESTER
• Bio cleaning and treatment by enzymes , microbes and surfactants.
• Cleaning and treatment fat, oil, grease, dirt, organic materials and odors caused.
• Reduces odors caused by rancid F.O.G built‐up.• Enhances the efficiency of wastewater treatment.• Can cleaner factory, house , farm , toilet more surface.• Non‐toxic.• Easy to use ( mix in water before use )
GERM KILLER BLOOD SCALE & OIL REMOVER
• Kills 99.9% of germ., E.Coli, Salmonella sp., and H1N1 Virus with natural peroxide.
• Remove blood, scale, grout stain with the power of peroxide.• Remove oily, food stains and deodorizers the kitchen to eliminate food odor.
• Cleans and prevents mold and mildew.• Readily biodegradable.• Ecologically sound with an effective extra oxygen atom.• Non‐toxic.• Easy to use ( spray in the air or spray on surface and clean )
250 ml. 1 liter 5 liter 20 litter
ODOR NEUTRALIZER
• Eliminates and cleans odor from degradable organic wastes.• Remove blood, scale, grout stain with the power of peroxide.• Strongly neutralizers hydrogen sulfide or unpleasant odors with the natural power of peroxide.
• Instantly controls odor without using overpowering masking scents or chemicals.
• Ecologically sound with an effective extra oxygen atom.• Non‐toxic.• Easy to use ( spray in the air or spray on surface and clean )