MINERVA MX-4000 MX-1000 THORN
Safety Products
1 12 2005/8/19
EN54 Part 2EN54 Part 4
LPCB Ref. NO. 143
The MINERVA MX panels are intelligent LPCB EN54 approved* panels, which can be networked to provide up to 396 detection loops and installed to BS5839:Pt.1 The MX1000 supports one MX DIGITAL
detection loop with up to 250 addressable devices.
The MX4000 supports two MX DIGITAL detection loops and can be expanded to four loops supporting up to 1000 addressable devices.
Both panels consist of a strong steel enclosure incorporating a removable chassis plate. The chassis plate holds: PSB800 5A 24Vd.c. battery backed power supply
and loop booster to EN54:pt.4 FIM800 field interface PCB incorporating one or
two MX DIGITAL loops CPU800 32 bit processor and memory card Optional network card, additional loop card (s)
and remote diagnostic modem Optional IOB800 input/output expansion card
mounted on the PSB800 The panel has a strong cast aluminium front door, which incorporates a modular user interface that fully complies with EN54:pt.2. The user interface incorporates the ODM800 operator display module with a 16 x 40-character backlit LCD display, simple alphanumeric keypad, 5 softkeys and a fast access key. The OCM800 operator control module provides all mandatory operator control keys and LED functions including Day/Night switching. Two control keys and 2 indication LEDs are provided for site-specific functions.
Control keys and LEDs are labelled in English according to the default LPCB functionality. The slide in decals can be reversed and alternative text added. Product Codes Standard Panels 557.200.001 MX1000 Single Loop Panel Shallow Back Box 557.200.002 MX1000 Single loop panel - Flush Back Box 557.200.003 MX4000 Two to Four Loop Panel Shallow Back Box557.200.004 MX4000 Two to Four Loop Panel Deep Back Box 557.200.009 MX4000 Two to Four Loop Panel - Flush Back Box Options 557.202.006 IOB-800 (8in/8out) expansion board (Max. 24 I/O on main panel) 557.202.007 XLM-MX two loop MX DIGITAL expansion card 557.202.026 TLI-800 ThornNet & MX-NET network card 557.202.036 Remote Diagnostic Modem 557.202.116 Modem Lead 557.202.118 MX CONSYS download lead
2 12 2005/8/19
MODULE/BOARD DESCRIPTIONS
NETWORK (MX-Net or FILNet)
COM 1 RS232 PRINTER
COM 2 RS232 CONFIGURATION PC/ MODEM
EXPANSION I/O BUS (IOB800s/TUD800)FAULT RELAY ALARM RELAY
ADDRESSABLE DEVICE CIRCUITS x 2~4
SOUNDER OUTPUTS x 2
UNSUPERVISED INPUT SUPERVISED INPUT
EMERGENCY ALARM I/P OPTIONAL 2nd PSB820 SUPPLY FOR XLM
REPEATERSMPM800 TO DRIVE
20-WAY STATUS COMMAND MODULE 40-WAY ALARM/FAULT LED MODULE
80-WAY ALARM LED MODULE XIOM800 16 I/O (UP TO 5 PER MPM800)
MIMIC PANELS IOB800 8IN / 8OUT
SERIAL/PARALLEL PRINTERS
3 12 2005/8/19
TYCO/THORN
MX-4000/1000
4 12 2005/8/19
5 12 2005/8/19
4.4.4.7 SERIAL PORTS
The FIM has 3 RS232 serial ports which are used for
communicating with the following:
COM1 - Serial printer.
COM2 - Configuration PC/Modem.
COM3 - ThornNet and FILNet
communications networks.
4.4.4.8 REMOTE BUS
This is an RS485 party-line asynchronous bus (maximum
length 1200m), driven by the FIM. As this bus can address
up to 16 peripherals, the unique address of any MPM on
the
bus must be set using a DIP switch.
Note: The maximum number of RBUS devices is limited by design considerations ie, MPM personality. The RBUS must be terminated with a 150 resistor at the
FIM and a 120 resistor at the last device on the RBUS.
4.4.4.9 I/O BUS
The I/O bus can drive up to 2 IOB800 Standard
8IN/8OUT
Expansion boards (see Section 4.5.2). The bus is a 1-bit
bidirectional
bus which is capable of addressing up to 24 I/O
devices. It may be used to drive up to 16 off-board LEDs,
relays, etc. and to read up to 8 auxiliary inputs.
Note: The maximum length of the Expansion Bus cable is 2 metres from the MPM: i) To any other board, or,
ii) where boards are daisy chained together
the total combined cable lengths.
4.4.4.10 CONNECTORS:
PL2: Power
PL3: Network power
PL4: Expansion I/O
PL5: Loop power
PL6: COM1 serial connector
PL8: COM2 serial connector
PL10: COM3 serial connector
PL12: Not fitted
PL9: Loop Expansion
PL11: Not fitted
PL13: OCM800
PL14: CPU interface
PL15: OCM800 (normally used in rack mounting)
H1: A Loop
H2: B Loop
H3: Sounder 1 and Sounder 2 outputs
H4: Supervised input
H5: Unsupervised input
H6: Emergency alarm input
H7: Fault relay
H8: Alarm relay
H9: Remote Bus
H10: Factory test
H11: Factory test
Headers
JP1: OFF - Ground Fault link OFF
ON - Ground Fault link ON
JP7: OFF - Emergency Alarm, fire LEDs ON,
has no effect on sounders
ON - Emergency Alarm fire LEDs ON, will
turn on sounders
JP11: Factory test
JP12: Factory test
JP10: Factory test
SOUNDER OPERATION NORMAL CLASS A
JP6 Not fitted Fitted
JP5 Fitted Not fitted
JP4 Fitted Not fitted
JP3 Not fitted Fitted
JP2 Not fitted Fitted
JP8: Only fitted for Class A to double output
current
JP9: Only fitted for Class A to double output
current
Class A no EOLs fitted.
SDR1 +ve return connected to SDR2 +ve.
SDR1 -ve return connected to SDR2 -ve.
In the event of a single open circuit, SDR2 only is active
and
drives both SDR1 +ve output and SDR2 +ve output. The
output current is doubled when header links JP8 and JP9
are
fitted.
4.4.5 OPERATOR CONTROL MODULE
The Operator Control Module (OCM) is used to provide:
LED indication of System, Panel, Sounder,
Hardware and Signalling status.
Pushbutton switches to provide control
functions.
MX 4000/1000 Housing (Shallow) Dimensions
6 12 2005/8/19
MINERVA MX-4000 MX-1000 THORN
Safety Products
7 12 2005/8/19
EN54 Part 2EN54 Part 4
LPCB Ref.NO. 143
MX LPCB EN54
396
BS5839:Pt.1
MX1000 1 MX250
MX40002MX44*250
PSB800 5A 24Vd.c.
FIM800 /12MX
CPU800 32 IOB800PSB800
EN54:pt.2 ODM80016 x 40LCD5 OCM 800
LED/
2 2 LED
s 557.200.001 MX1000 557.200.002 MX1000 557.200.003 MX4000 2~4 557.200.004 MX4000 2~4 557.200.009 MX4000 2~4 557.202.006 IOB-800 (8/8) (Max. 24 I/O
)
557.202.007 XLM-800 2 MX 557.202.026 TLI-800 ThornNet & MX-NET 557.202.036 557.202.116 557.202.118 MX CONSYS
DET
D
ET*
IB
C
P
D
IM
R
IM
C
IM
LI
800
DET
*
1.
250
2.
LED
#
1
#
2
24V
8 12 2005/8/19
(MX-Net or FILNet)
COM 1 RS232
COM 2 RS232
/ (IOB800s/TUD800)
x 2~4
x 2
PSB820
MPM800
20 40/ LED
80 LED XIOM800 16 I/O
MIMIC PANELS IOB800 8IN / 8OUT
PRINTERS
9 12 2005/8/19
TYCO/THORN
MX-4000/1000
10 12 2005/8/19
11 12 2005/8/19
4.4.4.7
FIM3 RS232
COM1 --
COM2 COM3 --ThornNetFILNet
4.4.4.8BUS
RS485 (
1200)FIM
16
MPM
RBUS ie
MPM
RBUS150
FIM120RBUS
4.4.4.9BUS
2 IOB800
8IN/8OUT ( 4.5.2 ) 1
24 I/O
16 LED,
8
MPM
2 :
4.4.4.10
PL2
PL3 TLI800
PL4
PL5
PL6 COM1
PL8 COM2 PC/
PL10 COM3
PL12
PL9 XLM800
PL11
PL13 OCM800
PL14 CPU
PL15 OCM800 ()
H1 A
H2 B
H3 12TOTAL2A
2.7K
H4 10K
H5
H6
H7 24V2A
H8 24V2A
H9 BUS(1200) H10
H11
JP1 OFF--
ON--
JP7 OFF--LED
ON--LED
JP11
JP12
JP10
Class A
JP6
JP5
JP4
JP3
JP2
JP8 A
JP9 A Class A
SDR1+ ve SDR2+ve
SDR1- ve SDR2-ve
SDR2
SDR1 +veSDR2 +ve
JP8JP9
MX 4000/1000 () 32 44 17
12 12 2005/8/19