Page 1 of 14(Rev. 04/2018)
M100LED Direct_v[1B]3.2 In a continuing eff ort to off er the best product possible, we reserve the right to change, without notice, specifi cations or materials that in our opinion will not alter the function of the product. Specifi cation sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2017, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Project:
Type: Qty:
Date: Customer:
M100LED Direct
Order Code: - - - - - - - - - - -
V9016
Lit Inverted90° Corner
IT9016
Lit “T” section IX9016
Lit “X” sectionIL9016
Lit Horizontal 90° Corner
Confi gurationOptions
NominalFixtureLength
01*1 ft.
022 ft.
044 ft.
033 ft.
055 ft.
066 ft.
088 ft.
077 ft.
XXRuns (over 12’) & Confi gurations, round up to the nearest foot and replace the “xx” with the # (i.e. 13=13’ nominal)
Finish WHWhite
BKBlack
SVSilver
Voltage
099 ft.
1111 ft.
1010 ft.
1212 ft.
Custom colors are available, Please consult factory
SPSpecify Premium Color
120120 Volt
277277 Volt
UNV120 thru 27750/60hz capable
Light Engine
CCT 303000K
353500K
404000K
Shielding LWLED Optimizedwhite lens
Mounting F5
Surface MountCCable
SSwivel Stem
RSRigid Stem
W4
Wall Mount
272700K
4 Consult factory for lengths under 2’
5 Over 8’ supplied with 2 or more housings that are joined in the fi eld.
1 Values calculated from a 4’ fi xture @4000K using LW Shielding and DIM driver. For additional information please see page 2.
2 Available starting at 2’ and up.3 Not available with Lutron.
Individual fi xtures, Runs and Confi gurations are supplied in nominal lengths to ensure full, even, illumination. See pages 2 thru 6 for additional details.
16 See page 10 for full details and restrictions
MIClear Lens with Microprism
EmergencyOptions
EC15
Emergency Circuit Wiring
15 See page 8 for full details and restrictions
DL10
Damp Location Rated
FS10
In-line FuseSS10
SeparateSwitching
FixtureOptions
10 See page 8 for full details and restrictions11 Consult factory
xxxx11
LED MR16 downlight
DM6,7
eldoLED SOLOdrive 0-10V (Linear)
Driver DML6,7
eldoLED SOLOdrive 0-10V (Logarithmic)
DMD6,7
eldoLED DALI(Logarithmic)
DCE6,7
Lutron Eco-System
DC36,7
Lutron 3-WireDC26,7,8
Lutron 2-Wire
6 See page 7 for full details7 Not available for 1’ length or with
1B45 or 1B408 120V only
DIM6
0-10V(Linear)
*1’ fi xture only available with 1 B35 light engine
-
LED WARRANTY
5YEAR ARRA
CompliantADA
Compliant
9 For use with E and P sensors only
SR6,7,9
Philips Xitanium SR (DALI)
1B351
706lm/8.5Wper foot
1B301,2
603lm/7.1Wper foot
1B251,2
540lm/6.3Wper foot
1B201,2
408lm/4.7Wper foot
1B451,2,3
887lm/10.9Wper foot
1B401,2,3
802lm/9.7Wper foot
347347 Volt(consult factory)
DC5Lutron 5-Series (consult factory)
xSNnLight enabled(consult factory)
EMRRemote Micro Inverter (consult factory)
EMIntegral EM Battery Pack(consult factory)
BLSemi-Matte Black
NBLMO Symmetric
A2LMO Asymmetric 20° Wall Washer
BWLMO Batwing
A5LMO Asymmetric 5° Wall Grazer
Series L10 M100 LED Direct
1Must be a minimum of 2 ft.
L10
L10
SensorOptions
xE12, 13
Enlighted
Replace “x” with quantity
xP112, 13
Philips Daylight
xP212 13
Philips Occ/Vac
xP312, 13
Philips Occ/Vac/Daylight
xS112, 14
Sensor Switch Daylight
xS212, 14
Sensor Switch Occ/Vac
xS312, 14
Sensor Switch Occ/Vac/Daylight
12 Minimum length 2’. See page 9 for full details and restrictions13 For use with SR driver only14 For use with DIM driver only
Page 2 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M100LED Direct
Construction:
Housing - Continuous, low copper 6063-T6 extruded aluminum profile with aluminum endcaps, available as Individual fixtures (up to 12’) or Runs.
Geartray - Low copper 6063-T6 extruded alu-minum profile
Shielding -Extruded, impact resistant acrylic snap in lens:- LED optimized white lens (LW)- Clear lens with microprism (MI)“LMO” refers to the Selux proprietary LED optical system - Light modulation optics. These lenses are offered in M100 behind a Satine Lens for even illumination and comfortable lit appearance.- “LMO” symmetric lens (NB)- “LMO” Asymmetric 20° wall washer (A2) - “LMO” Asymmetric 5° wall grazer (A5)- “LMO” Batwing (BW)
Mounting(s) - 1/16” Aircraft Cable, Ø5/8” Swivel or Rigid Steel Stem, Wall Bracket, Surface mounting (see pages 3 thru 6 for details).** Cable, Stem and Wall mountings may not be symmetrical for Runs and Configurations due to the use of modular housing lengths. If sym-metrical suspensions are required please consult the factory.
Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. Runs and Con-figurations are available in approximately 1/4” increments starting at the nominal 12’ fixture length. ** Individual luminaires are not joinable in the field.
Exact length luminaires - Individual lumi-naires, Runs, and Configuration are available in exact lengths to meet your project needs. Please consult factory with your requirements. ** Lens luminance may soften at the very ends of the straight sections for exact length luminaires.
L10 Joiner(s) - Runs and Configurations are supplied in multiple housing that are joined together in the field using the supplied L10 Joiner System. This allows ease of installation and ensures a uniform appearance (see page 8 for detail).
Weight: 3.2 lb. per foot.
Electrical/Performance:
LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 96% at 25,000 hours and 93% at 60,000 hours @ 25ºC per TM-21 reports. Reported L70 greater than 60,000 hours.
Delivered Lumens - Due to LED manufacturer’s tolerances the listed output has a ±5% toler-ance. For outputs based on different shielding or CCT please see photometry section at the end.
CCT - Available in 2700K, 3000K, 3500K and 4000K, tolerance within a 3-step MacAdam ellipse.
CRI - Min. 90.
All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC>0.90. For more detailed information on the available drivers please see page 7.
Sensors - Selux offers a variety of integral sensor options. For details and specifications, please refer to page 9.
Thermal Performance:
Ambient Operating Temperature - Luminaires suitable for maximum ambient temperature of 35° C (95° F) for all drivers.
Luminaires are suitable for minimum ambient temperatures of:-40ºC (-40ºF) for DIM, DM, DML, and DMD drivers.-20ºC (-4ºF) for SR drivers.0ºC (32ºF) for DC2, DC3, and DCE drivers.
Luminaire Finish:
Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI.
All products undergo a five stage intensive pretreatment process where product is thor-oughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention.
Standard interior colors are White (WH), Black (BK), Semi-Matte Black (BL), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.
Warranty:
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M100 series LED luminaire shall be free from defects in mate-rial and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see “Selux Terms and Condition of Sale.”
Certifications and Compliance: NRTL - For Dry and Damp location (I.E. cULus)ADA CompliantARRA CompliantRoHS Compliant
4” (101mm)
3 11/16” (94mm)
LW lens shown for reference
3 15/16”” (100mm)
Page 3 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M100LED Direct
Cable Mounting (C)
Outlet box for feed only (by others)
L10 Cable (C) Suspension Detail (Feed location(s) only)
L10 Cable (C) Suspension Detail (Non-Feed location(s) only)
Cross bar with 1/4-20 rod and ground screw
1/4” x 5” diameter canopy (white)
2x White cable stay
Cord strain relief bushing
Chrome gripper
1/4”- 20 Threaded Rod (supplied & installed in the field by others)
1. Ø 1/16” Aircraft Cable with chrome gripper for easy adjustment (48” max. from ceiling to luminaire).
2x Outlet box screws (by others)
1/4-20 Slip ring coupler
Feed cord (white)
1/16” Aircraft cable
Luminaire
1/4-20 Slip ring coupler
1/16” Aircraft cable
Chrome gripper
Luminaire
1/4” x 2” diameter Canopy (white)
Cable Mounting (C) - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
01 (1 ft.) 1' - 5/16" 313 0' - 2 1/8" 54 0' - 8 1/8" 206 0' - 1 1/8" 29
02 (2 ft.) 2' - 1/4" 616 0' - 2 1/8" 54 1' - 8" 508 0' - 1 1/8" 29
03 (3 ft.) 3' - 5/16" 923 0' - 3 1/8" 79 2' - 6 1/8" 764 0' - 2 1/8" 54
04 (4 ft.) 3' - 11 7/16" 1205 0' - 3 1/8" 79 3' - 5 3/16" 1047 0' - 2 1/8" 54
05 (5 ft.) 4' - 11 7/16" 1510 0' - 3 1/8" 79 4' - 5 3/16" 1351 0' - 2 1/8" 54
06 (6 ft.) 5' - 11 7/16" 1815 0' - 3 1/8" 79 5' - 5 3/16" 1656 0' - 2 1/8" 54
07 (7 ft.) 6' - 11 7/16" 2119 0' - 3 1/8" 79 6' - 5 3/16" 1961 0' - 2 1/8" 54
08 (8 ft.) 7' - 11 7/16" 2424 0' - 3 1/8" 79 7' - 5 3/16" 2266 0' - 2 1/8" 54
09 (9 ft.) 8' - 11 7/16" 2729 0' - 3 1/8" 79 8' - 5 3/16" 2570 0' - 2 1/8" 54
10 (10 ft.) 9' - 11 7/16" 3034 0' - 3 1/8" 79 9' - 5 3/16" 2875 0' - 2 1/8" 54
11 (11 ft.) 10' - 11 7/16" 3339 0' - 3 1/8" 79 10' - 5 3/16" 3180 0' - 2 1/8" 54
12 (12 ft.) 11' - 11 7/16" 3643 0' - 3 1/8" 79 11' - 5 3/16" 3485 0' - 2 1/8" 54
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Cable Mounting (C)
Page 4 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M100LED Direct
Stem Mounting (S & RS)
Outlet box (supplied & installed by others)
L10 Swivel Stem (S) Suspension Detail (feed wires through stem supplied by Selux)
L10 Rigid Stem (RS) Suspension Detail (feed wires through stem supplied by Selux)
3/8”IP Cross bar with ground screws
Hemispherical assembly
1 7/16” x 5” diameter canopy (white)
1. Ø 5/8” Swivel Stem provides 30° swivel and can be cut in field (48” max. from ceiling to luminaire).
2. Ø 5/8” Rigid Stem is fixed and is not able to be cut/adjusted in field (48” max. from ceiling to luminaire).
Pin
3/8” IP steel stem (white)
Dress nut
Square nut
Luminaire
Outlet box (supplied & installed by others)
3/8 IP nipple (supplied & installed by others)
Suspension hickey
Canopy securing screw
1/4” x 5” diameter canopy (white)
Swivel (S) & Rigid Stem (RS) Mountings - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
01 (1 ft.) 1' - 5/16" 313 0' - 2 1/8" 54 0' - 8 1/8" 206 0' - 2 1/8" 54
02 (2 ft.) 2' - 1/4" 616 0' - 2 1/8" 54 1' - 8" 508 0' - 2 1/8" 54
03 (3 ft.) 3' - 5/16" 923 0' - 3 1/8" 79 2' - 6 1/8" 764 0' - 3 1/8" 79
04 (4 ft.) 3' - 11 7/16" 1205 0' - 3 1/8" 79 3' - 5 3/16" 1047 0' - 3 1/8" 79
05 (5 ft.) 4' - 11 7/16" 1510 0' - 3 1/8" 79 4' - 5 3/16" 1351 0' - 3 1/8" 79
06 (6 ft.) 5' - 11 7/16" 1815 0' - 3 1/8" 79 5' - 5 3/16" 1656 0' - 3 1/8" 79
07 (7 ft.) 6' - 11 7/16" 2119 0' - 3 1/8" 79 6' - 5 3/16" 1961 0' - 3 1/8" 79
08 (8 ft.) 7' - 11 7/16" 2424 0' - 3 1/8" 79 7' - 5 3/16" 2266 0' - 3 1/8" 79
09 (9 ft.) 8' - 11 7/16" 2729 0' - 3 1/8" 79 8' - 5 3/16" 2570 0' - 3 1/8" 79
10 (10 ft.) 9' - 11 7/16" 3034 0' - 3 1/8" 79 9' - 5 3/16" 2875 0' - 3 1/8" 79
11 (11 ft.) 10' - 11 7/16" 3339 0' - 3 1/8" 79 10' - 5 3/16" 3180 0' - 3 1/8" 79
12 (12 ft.) 11' - 11 7/16" 3643 0' - 3 1/8" 79 11' - 5 3/16" 3485 0' - 3 1/8" 79
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Stem Mounting (S & RS)
LuminaireDress nut
Square nut
Square nut
Square nut
3/8” IP steel stem (white)
Page 5 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M100LED Direct
Wall Mounting (W)
1. Aluminum wall bracket (by Selux)2. 4”x4” or 2”x4” J-Box at feed location (supplied and installed by
others).3. 1/4-20 Threaded rod, 1/4-20 lock washer and 1/4-20 nut required to
anchor the wall bracket. Mounting hardware supplied and installed to code by others.
Wall Mount (W) (Covers a 4x4 or 2x4 J-Box)
Wall (W) Mount - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
“C” Mid. Suspension
“D” Feed Location
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
01 (1 ft.) 1' - 5/16" 313 0' - 6 3/16" 157 NA 0' - 6 3/16" 157
02 (2 ft.) 2' - 1/4" 616 0' - 3 1/8" 79 1' - 6 1/16" 458 0' - 3 1/8" 79
03 (3 ft.) 3' - 5/16" 923 0' - 6 1/8" 156 2' - 1/8" 612 0' - 6 1/8" 156
04 (4 ft.) 3' - 11 7/16" 1205 0' - 6 1/8" 156 2' - 11 3/16" 894 0' - 6 1/8" 156
05 (5 ft.) 4' - 11 7/16" 1510 0' - 6 1/8" 156 3' - 11 3/16" 1199 0' - 6 1/8" 156
06 (6 ft.) 5' - 11 7/16" 1815 0' - 6 1/8" 156 4' - 11 3/16" 1504 0' - 6 1/8" 156
07 (7 ft.) 6' - 11 7/16" 2119 0' - 6 1/8" 156 5' - 11 3/16" 1808 0' - 6 1/8" 156
08 (8 ft.) 7' - 11 7/16" 2424 0' - 6 1/8" 156 6' - 11 3/16" 2113 0' - 6 1/8" 156
09 (9 ft.) 8' - 11 7/16" 2729 0' - 6 1/8" 156 7' - 11 3/16" 2418 0' - 6 1/8" 156
10 (10 ft.) 9' - 11 7/16" 3034 0' - 6 1/8" 156 8' - 11 3/16" 2723 0' - 6 1/8" 156
11 (11 ft.) 10' - 11 7/16" 3339 0' - 6 1/8" 156 9' - 11 3/16" 3028 0' - 6 1/8" 156
12 (12 ft.) 11' - 11 7/16" 3643 0' - 6 1/8" 156 10' - 11 3/16" 3332 0' - 6 1/8" 156
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
4” (102mm)
1”
(25mm) 4 15/16”
(126mm)
4” (102mm)
Page 6 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M100LED Direct
Surface Mounting (F) - 1’ to 8’
1. Ø 5/16” Mounting hole drilled at the factory (mounting hardware to code by others).
Surface Mounting (F) - Over 9’ to 12’
Surface Mount (F)
Surface Mount (F) - Dimensions
Nominal Length
“A” Housing Length
* “B” (Ref.) End Suspensions
* “B1” End Suspensions
“C” Mid. Suspension
“C1” Mid. Suspension
“C2” Mid. Suspension
“D” Feed Location
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
01 (1 ft.) 1' - 5/16" 313 0' - 1 5/8" 41 N/A 0' - 9 1/8" 231 N/A N/A 0' - 4 1/8" 105
02 (2 ft.) 2' - 1/4" 616 0' - 1 5/8" 41 N/A 1' - 9" 534 N/A N/A 0' - 4 1/8" 105
03 (3 ft.) 3' - 5/16" 923 0' - 6 1/8" 156 N/A 2' - 1/8" 612 N/A N/A 0' - 2 1/8" 54
04 (4 ft.) 3' - 11 7/16" 1205 0' - 6 1/8" 156 N/A 2' - 11 3/16" 894 N/A N/A 0' - 2 1/8" 54
05 (5 ft.) 4' - 11 7/16" 1510 0' - 6 1/8" 156 N/A 3' - 11 3/16" 1199 N/A N/A 0' - 2 1/8" 54
06 (6 ft.) 5' - 11 7/16" 1815 0' - 6 1/8" 156 N/A 3' 914 1' - 11 3/16" 590 N/A 0' - 2 1/8" 54
07 (7 ft.) 6' - 11 7/16" 2119 0' - 6 1/8" 156 N/A 3' 914 2' - 11 3/16" 894 N/A 0' - 2 1/8" 54
08 (8 ft.) 7' - 11 7/16" 2424 0' - 6 1/8" 156 N/A 3' 914 3' - 11 3/16" 1199 N/A 0' - 2 1/8" 54
09 (9 ft.) 8' - 11 7/16" 2729 0' - 6 1/8" 156 0' - 6" 153 3' - 11 3/16" 1199 NA 3' 914 0' - 2 1/8" 54
10 (10 ft.) 9' - 11 7/16" 3034 0' - 6 1/8" 156 0' - 6" 153 3' 914 1' - 11 3/16" 590 3' 914 0' - 2 1/8" 54
11 (11 ft.) 10' - 11 7/16" 3338 0' - 6 1/8" 156 0' - 6" 153 3' 914 2' - 11 3/16" 894 3' 914 0' - 2 1/8" 54
12 (12 ft.) 11' - 11 7/16" 3643 0' - 6 1/8" 156 0' - 6" 153 3' 914 3' - 11 3/16" 1199 3' 914 0' - 2 1/8" 54
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Page 7 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M100LED Direct
Driver Quantity
1 ft. 2 ft. 3 ft. 4 ft. 5 ft. 6 ft. 7 ft. 8 ft. 9 ft. 10 ft. 11 ft. 12 ft. RUN
DIM 1 1 1 1 2 2 2 2 3 3 3 3Approximately 2 drivers per 4 ft.
DM, DML & DMD drivers N/A 1 1 1 1 1 2 2 2 2 3 3Approximately 2 drivers per 4 ft.
DC2, DC3, & DCE drivers N/A 1 1 1 2 2 2 2 3 3 3 3 Consult Factory
Drivers:
0-10V linear dimming (DIM)Luminaires supplied with drivers offering the capability of either normal switched operation or 0-10V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%. (Due to size constraints, 1’ luminaires are supplied with a driver from a different manufacturer than 2’ and above luminaires. For details, please consult factory.)
eldoLED SOLOdrive 0-10V linear dimming (DM)Luminaires supplied with SOLOdrive 0-10V dimming driver for linear dim-ming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.
eldoLED SOLOdrive 0-10V logarithmic dimming (DML)Luminaires supplied with SOLOdrive 0-10V dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For “dim to dark” (down to 0.1%), please consult factory.
* For control recommendations for eldoLED drivers, please consult eldoLED.
LUTRON 2-wire dimming (DC2)Luminaires supplied with Hi-lume 2-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.
LUTRON 3-wire dimming (DC3)Luminaires supplied with Hi-lume 3-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.
LUTRON Ecosystem dimming (DCE)Luminaires supplied with Hi-lume EcoSystem (4 wire, digital link) dim-ming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%.
* For control recommendations and system layout for Lutron drivers, please contact Lutron.
Philips Xitanium Sensor Ready DALI dimming (SR)Luminaires supplied with Xitanium SR dimming driver programmed for Constant Current Reduction (CCR). Minimum dim level down to 5%. For use with E and P sensors only.
* For SR driver count, please consult factory* For inrush and control current, please refer to driver manufacturers’ spec sheets.
Wiring Diagrams Sensor Wiring Diagrams
standard0-10V linear (DIM) 0-10V linear eldoLED SOLOdrive (DM)0-10V logarithmic eldoLED SOLOdrive (DML)DALI eldoLED SOLOdrive (DMD)Philips SR DALI (SR)
DIM, DM, DML, DMD & SR
DALIDALI
ENLIGHTEDOR PHILIPSSENSOR
ELDO 0-10V
SENSORSWITCH
PHILIPS XR
SR (+)SR (-)
(+)(-) 0-10V AUX (+)
AUX (-)
Page 8 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M100LED Direct
Joiner System - standard for Runs and Configurations
Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the hot wire for each feed. (supplied with an 8A slow burn fuse).
Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings. All solder points on LED boards are conformal coated. The phosphor layer of the LEDs is free of coating to avoid hazing.
*For Damp Location with sensors, please consult factory.
Separate Switching (SS) - Luminaires available with separately switched 4’ (nominal) sections starting at 7’ and up. Luminaire is in-tended to be wired to the same panel/breaker (not intended for Emer-gency use).
- To specify this option, the number of separately switched sections and locations of these sections must be provided at time of order.
* If the project requires different separate switching than outlined above please consult the factory.
*For Separate Switching with sensors, please consult factory.
Emergency Circuit (EC) - Luminaires with EC option compliant to UL 924 listed emergency luminaire. EC luminaires are intended to be wired to separate panels/breakers for emergency use.
- For 1’ to 6’ nominal luminaires, the entire fixture is wired for operation on emergency circuit.
- For 7’ and up nominal luminaires, the first 4’ nominal length is wired for operation by a separate EM circuit by default to meet the required “Life Safety Code” (NFPA 101).
*If a different configuration is needed please consult the factory.
*For EC with sensors, please consult factory.
Page 9 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M100LED Direct
Standard Sensor Placement - for other placement options, please consult factory. For functionality and limitations, please see sensor details above.
Lens Aluminum Sensor Plate -to be painted same as fixture unless specified otherwise
Qty 1 Sensor - Beginning Qty 2 Sensor - Beginning and End (9’ fixtures and longer)
Qty 3+ Sensor - For spacing between sensors, please consult the sensor manufacturer
Beginning of Run
Notes: 1. For spacing between sensors, please consult the sensor manufacturer. 2. Exact sensor placement and coverage will be defined by approved factory drawing. 3. Sections controlled by sensors may not be symmetrical - consult factory for layout.
3” (76mm)
Enlighted FS-D22 (E)Occupancy/vacancy, daylight harvesting, plus the Internet of Things (IoT) data collection and reporting. For full details, please see FS-D22 spec sheet on the Enlighted website. Must be paired with Philips Xitanium SR driver (SR driver selection). Commissioning by Enlighted. *Please contact Enlighted for complete details prior to specifying. *Sensor can control up to 4 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths.
Philips EasySense SNS102 (P)Occupancy/vacancy and daylight harvesting. Sensor can be programmed on-site via NFC or IR using Android app only, by others. For full details, please see the SNS102 spec sheet on the Philips website. Must be paired with Philips Xitanium SR driver (SR driver selection). Wall dimming via wireless wall switch from Philips/Illumra (www.illumra.com/easysense). **Please contact Philips for complete details prior to specifying. *Sensor can control up to 10 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths.
Sensor Switch MSD EZ (S)Occupancy/vacancy and daylight harvesting. For full functionality and programming options, select settings option 3. If a different settings option is selected, other settings may be unavailable. For full details, please see MSD EZ spec sheets on the Sensor Switch website. Must be paired with eldoLED 0-10V driver (DIM driver selection). Manual control of dimming not available with MSD EZ sensor. *Please contact Sensor Switch for complete details prior to specifying.*Sensor can control up to 30 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths.
Occupancy Vacancy Daylight Harvesting Driver Compatibility
Enlighted FS-D22 (E) See Enlighted’s website for full capabilities SR
Philips EasySense SNS102 (P) √ √ √ SR
Sensor Switch MSD EZ (S) √ √ √ DIM
Factory Presets - Sensors come from the sensor manufacturer with factory presets for each of the settings in above chart. Please see sensor manufacturers’ spec sheets for details on presets and re-programming.
Commissioning - Commissioning of sensors and installation by others. Contact sensor manufacturer for details and costs associated with commissioning the system prior to specification of sensors.
Sensor Ordering Chart
Quantity Sensor Settings*
x Number of Sensors E Enlighted FS-D22
P Philips Easy Sense SNS102
S Sensor Switch MSD EZ
1 Daylight
2 Occupancy/Vacancy
3 Daylight/Occupancy/Vacancy
* Settings not available with Enlighted
* Lit section will be the fixture length minus 3” for sensor plate.
Fixture Length
Lit Section*
3 15/16”” (100mm)
Page 10 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
M100LED Direct
Listed below are the minimum lengths and details for standard shapes. These standard shapes can be combined with each other and/or the standard luminaire lengths, ensuring full even illumination. If you have any questions, please consult the factory.
The minimum standard lengths for “L” shapes:- IL90 or V90 open shapes is 4’ x 4’ nominal (example: leg, 90, leg)- IL90 or V90 closed shapes is 6’ x 6’ nominal (example: 90, leg, 90)( Exception is that the IL90 & V90’s can be joined directly to provide a 4’ x 4’ nominal shape)
*For sensors in configurations, please consult factory.
Standard Direct shapes/configurations:
The minimum standard lengths for “T” & “X” shapes:- IT90 = 4’ nominal on the short leg and 8’ nominal on the long side- IX90 = 8’ nominal for either direction
Selux is capable of supplying a wide range of project solutions including different shapes, angles, and sizes to meet the project requirements. Due to the complex nature of these project specific layout(s) we ask that you please consult the factory with the project requirements for review.
Project Specific Direct shapes/configurations:
Direct Lit Corner and Section - Dimensions
IL90 V90 IT90 IX90
Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM
“A” Housing (Outside) 2' - 2 1/16" 662
“A1” Housing (Inside) 1' - 10 1/8" 562
“B” Housing (Outside) 2' - 3 1/2" 698
“B1” Housing (Inside) 1' - 11 1/2" 597
“C” Housing 2' - 2 1/16" 662
* “C1” Ref. 2' - 1/8" 612
“D” Housing 4' - 3/16" 1224
* “D1” Ref. 2' - 1/8" 612
“E” Housing 4' - 3/16" 1224
* “E1” Ref. 2' - 1/8" 612
*Dimension(s) rounded to the nearest 1/16” with a ± 1/16 (1mm) tolerance.
Page 11 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Photometry
254
507
761
1014
1
2
Maximum Candela = 1014 Located At Horizontal Angle = 0, Vertical Angle = .5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
LW Optics / 34W LED / 4000K CCT
Catalog #: L10-1B35-40-LW-04-XX-UNVReport #: 11685024.03 Delievered Lumens: 2822 Input Watts: 34.0488WEfficacy: 83 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 4000KCRI: 95.7Max Candela: 1014 @ .5° from VerticalSpacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 1.24 Spacing Criterion (Diagonal): 1.38
M100LED Direct
490
980
1469
1959
12
Maximum Candela = 1959 Located At Horizontal Angle = 0, Vertical Angle = 1# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
MI Optics / 34W LED / 4000K CCT
Catalog #: L10-1B35-40-MI-X-04-XX-UNVReport #: 11685024.07 Delivered Lumens:2963 Input Watts: 34.0653WEfficacy: 87 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 3950KCRI: 95.7Max Candela: 1959 @ 1° from VerticalSpacing Criterion (0-180): 1.22 Spacing Criterion (90-270): 0.88 Spacing Criterion (Diagonal): 1.04
Page 12 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Photometry
NB Optics / 34W LED / 4000K CCT
Catalog #: L10-1B35-40-NB-04-XX-UNVReport #: 12236853.04 Delievered Lumens: 2974 Input Watts: 33.28 WEfficacy: 89 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 4000KCRI: 95.7Max Candela: 1318.24 @ .5° from VerticalSpacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 1.24 Spacing Criterion (Diagonal): 1.38
M100LED Direct
330
659
989
1318
1
2
Maximum Candela = 1318.24 Located At Horizontal Angle = 90, Vertical Angle = .5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
A2 Optics / 34W LED / 4000K CCT
Catalog #: L10-1B35-40-A2-X-04-XX-UNVReport #: 12236853.0104 Delivered Lumens:2904 Input Watts: 33.18 WEfficacy: 88 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 3950KCRI: 95.7Max Candela: 1959 @ 1° from VerticalSpacing Criterion (0-180): 1.22 Spacing Criterion (90-270): 0.88 Spacing Criterion (Diagonal): 1.04
357
715
1072
1430
12
Maximum Candela = 1429.757 Located At Horizontal Angle = 0, Vertical Angle = 15.5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
Page 13 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Photometry
360
720
1080
1440
1
2
Maximum Candela = 1440.25 Located At Horizontal Angle = 0, Vertical Angle = 5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
A5 Optics / 34W LED / 4000K CCT
Catalog #: L10-1B35-40-A5-04-XX-UNVReport #: 12236853.020440 Delievered Lumens: 2974 Input Watts: 33.28 WEfficacy: 89 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 4000KCRI: 95.7Max Candela: 1440.25 @ .5° from VerticalSpacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 1.24 Spacing Criterion (Diagonal): 1.38
M100LED Direct
253
506
759
1012
1
2
Maximum Candela = 1012.29 Located At Horizontal Angle = 90, Vertical Angle = 16.5# 1 - Vertical Plane Through Horizontal Angles (90 - 270)# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
BW Optics / 34W LED / 4000K CCT
Catalog #: L10-1B35-40-BW-X-04-XX-UNVReport #: 12236853.030440 Delivered Lumens:2843 Input Watts: 33.22 W Efficacy: 86 Power Factor: 0.991 Total Harmonic Distortion: 9.30 CCT: 3950KCRI: 95.7Max Candela: 1012.29 @ 1° from VerticalSpacing Criterion (0-180): 1.22 Spacing Criterion (90-270): 0.88 Spacing Criterion (Diagonal): 1.04
Page 14 of 14 (Rev. 04/2018)
M100LED Direct_v[1B]3.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Photometry
M100LED Direct
CCT and CRI multipliers apply to the photometry, IES files, and per foot values listed on page one (light engine).
Light engine multiplier supplied for per foot values listed on page one (light engine).
4000K3500K3000K2700K
Light Engine Lumens Wattages1B45 1.258 1.2851B40 1.137 1.1401B35 1.000 1.0001B30 0.855 0.8381B25 0.766 0.7401B20 0.578 0.552
LWMINBA2A5BW
1.0611.0291.0541.008
Lens Multiplier1.0001.050
L100 LED Direct Photometry Multiplier Table
CCT Multiplier
Light Engine Multiplier
1.0000.9720.9630.931