Download pdf - Kama Catalogue

sirens • beLLs • Hooters • eLectronic sounders • FLameProoF deVices • marine sounders and beacons

intrinsicaLLY saFe sounders and beacons • Voice sounders • combination units • airHorns

Safety is a sound investment.

sirenco

2

Contents

Product grouP Listing 3

seLection and aPPLication 4-6

a guide to seLecting and Positioning wide area sirens 7

ingress Protection tabLe (iP) 8

FLameProoF 9

uL exPLosion ProoF 10

aPParatus cHart 11

decibeL Versus distance cHart 12

index 13-20

Products 21-158

notes 159

sirenco

distributor:

3

Contents

ProDUCt groUP LIstIng:

motorised sirens 21-24

Long range sirens 25-33

Hand oPerated sirens 34-37

air and HYdrauLic sirens 38-39

Hooters 40-44

beLLs 45-47

FLameProoF deVices (bansHee) 48-61

bansHee combination units 62-64

eLectronic sounders 65-67

beacons (bansHee) 68-71

emergencY FLare 72-73

is PortabLe beacon 74

otHer Products (Hand Held Horns & Megaphones) 75-76

son F1 range 77

a range sounders and combination units 78-82

exPLosion ProoF deVices (e2s) 83-91

is range 92-99

beacons (e2s) 100-101

marine range 102-106

son 4 range 107-108

aPPeLLo 109-110

gPH Horns 111-112

Hootronics 113-116

beacons (sPectra) 117-141

PaneL mount Products (Indicator lamps and buzzers) 142-146

traFFic LigHts, sPectra 147-151

sounders and combination units, sPectra 152-156

turbo bLowers 157-158

sirenco

4

seLeCtIon AnD APPLICAtIon

Listed below are some important product information and categories which will be required when making a selection of the type of signalling unit that will best suit your application. There is a wide range of sirens, electronic sounders, hooters, flameproof units and beacons available to choose from. Kama Industries offers on site service in assisting you with your selection of a signalling unit. Please contact your supplier to arrange this.

PLEASE NOTE: Utmost care was taken in the preparation of this catalogue to insure all the information is correct. Kama Industries and any of its distributors do not accept any liabilities for any consequences resulting in the use of the information contained in these documents. If in doubt, please contact your supplier.

Selecting a signalling device for a particular application is usually determined by various factors:• The type of electricity supply available

• Ambient noise in the environment

• The duration of signal required

• The quality and type of audible or visual signal required to attract attention

• Environmental conditions (indoor, outdoor, explosive atmosphere)

Environmental FactorsThe intensity and type of sounder or beacon chosen for the area in which they will be used, will be dependant on the application i.e. sounders for certain applications in the Food Industry may not be suitable for similar applications in an industrial area. A sounder used in a Manufacturing Company (Heavy Industrial) may not be suitable for a similar application at a School. Industrial, Mining and Manufacturing Included in this category is not only factory premises but also equipment and facilities used in factories, such as cranes, mechanical handling vehicles, diesel generating sets and control panels. Also included in this category, are industrial hazardous locations such as coal mines and the petro chemical industry.

Building: Commercial and PublicHospitals, Schools, Offices, Building sites, Houses, Military sites and Airports can be classified under this category. Due to continuous product research and developement some products may vary from the specifications in this catalogue.

Priority and Public Service Vehicles Police vehicles, Fire departments and Ambulances

Marine Dock and Ship installations, including any other hazardous sites (oil terminals etc.)

5


FrequencyThe frequency is the identication of note and is usually defined by the number of vibrations per second. To measure frequency one should use a frequency meter. In cases where the electrical contractor does not have such a meter, it is usually sufficient for the ambient noise frequency in an environment for our purposes to be identified. For example, the noise in a machine shop in which a grinder is being operated would be of a high frequency, while that of forge with a drop hammer would be of a low frequency.

Time ratingAccount must be taken of the time cycle over which the alarm is required to operate and a signal has to be selected which has an adequate time rate. It should be noted that sounders used as evacuation alarms are required to be continuously rated. Sirens for example, are products available on the market which have time ratings of either one minute or more, but these products are not accepted by the Fire Authorities. The contractor should keep this in mind when modifying or inspecting existing installations.

Noise Level requiredHaving established the ambient or background noise and frequency level, the sound pressure level needs to be defined in order for the sound to be heard over the distance that the sound is required to travel. Tests show that the ear can distinguish a warning signal which is ten decibels below that of the ambient noise level, provided that there is an adequate frequency differential.

Noise AttenuationIn selecting the correct sound pressure level required to cover an application, it is necessary to appreciate that as a “rule of thumb” sound is absorbed and reduces at the rate of 6 decibels as the distance from the signal is doubled. This factor is known as attenuation. Where the operating conditions are difficult, for example where there is a likelihood of high winds or where there are solid objects in the noise path, attenuation of 8 to 10 decibels should be allowed for to avoid “blind spots” or inadequate coverage. Before finally choosing the signal to be used, ensure that the same or similar sound is not used in an adjacent system for other applications. Should the sounder be installed outdoors and be subjected to exterior elements, then a weather proof version must be selected. It should be remembered that there are also in-door situations that require weatherproof enclosures. Explosion or flameproof signal devices are essential if the sounder is required to be sited in a location where there are explosive or fire hazard conditions.

Sounders AvailableThere are many basic types of signalling devices available but in this selection we are covering:

• Sirens

• Buzzers and Hooters

• Electronic Sounders

• Beacons

• Bells

6


SirensSirens are low frequency devices usually continuous rated and are electric motor driven. Air is pulled in through a multi bladed impeller and pushed out through radial vents. The combination of motor speed and the number of impeller blades, with the number and spacing of the radial outlets determine the frequency. The siren is used extensively for disaster warning but also has many other applications. These include, uses as fire alarms, anti-theft/security alarms, process control, time signalling, fault indication and machinery stop-start alarms. Most individual requirements are covered by sirens rated from 100 W to 7.5 KW, which have sound outputs from 95 dB to 145 dB at 1 metre distances and giving an audible signal over a range of 100 to 15000 metres.

Buzzers and Hooters These are electro-mechanical devices where the diaphragm is deflected by an electro magnet. In general, hooters are low cost and robust. Their applications include fire and security alarms in Industrial and Marine applications, truck horns, process control, time signalling, telephone signalling, boat horns and public vehicle attack alarms. Buzzers can be used with projectors to give more directional sound and are used as general industrial alarms, crane warning alarms, control panel warning alarms, industrial truck alarms and boat alarms.

Electronic SoundersThe electronic sounder is by far the most versatile device available and has many distinct advantages as far as the design engineer and contractor is concerned. Not least of these is the low current consumption and relatively high sound output, which make the electronic sounder ideal for use in conjunction with battery powered systems. Consequently, this type of sounder is also used extensively for fire and security alarm systems, as well as industrial mining, process control, marine and hazardous area applications.

BeaconsThe beacons can assist by adding additional visual attraction by means of a flashing, static or rotating format. These units are normally available in RED, AMBER, GREEN and BLUE, but other colours are available on request. The LED beacon can be set to flash at up to 120 flashes per minute or remain static.The Xenon flasher is avaliable in all the colours and the LED flasher usually only in RED or AMBER, other colours available on request. When beacons are used in conjunction with sirens or sounders, the unit can be connected to set the siren and beacon off simultaneously or with the siren sounding for a short period and the beacon flashing until the condition for alert has been rectified.

BellsThese are motor driven or coil driven devices mainly used for School alarms, Fire and Security alarms and time signalling. These units have high frequencies and low current consumption. Of particular interest to the contractor is that models have been designed to make installation very simple.

7

When selecting a siren, a careful study of the specific project is required. Although Kama Industries will always be prepared to give advice, it is first of all necessary that each of the following points be considered:

1. The nature of the proposed warning signals, including sequences, duration of blasts, intervals and length of signal. Each type of hazard should be given its own code to ensure the correct response. On-site warning signals must not be confused with off-site warning signals.

2. Area and range of audibility to be covered by the system. The signal must be clearly audible to all persons, inside and outside the plant likely to be affected.

3. The nature of the terrain and construction and heights of the buildings and structures on the site. Uneven ground and enclosed or noisy areas must be taken into account.

4. The type of system to be installed. Plants with high levels of machine noise - or covering large areas - may be better covered by a series of smaller sirens than by one large unit.

5. Local meteorological conditions. For example, temperature, fog, mist, wind, snow or rainfall must also be taken into account.

6. The nature of other signals in the area. Hazard signals must not conflict with emergency services or civil defence signals.

7. Test facilities. Siren motors, shutter and signal sequences should be regularly tested to ensure that they are still functioning properly.

8. Availability of an adequate power supply, or a power back-up system.

9. The positioning of sirens. The ideal height above ground level for a siren depends on the individual type and sound output of the instrument. Sirens should not be mounted too high above ground level: 4 m to 6 m are usually recommended. Installing sirens on top of high buildings often has the effect of deflecting the sound wave upward because of negative temperature gradients. Sirens should not be located close to tall buildings. There should be adequate clearance around each instrument to allow sound distribution.

Coded SirensSimilar to general-purpose sirens, but incorporating sound damping shutters that enable them to be used for making clearly defined coded signals i.e. succession of short or long blasts, a mixture of short or long blasts, etc. This enables one instrument to be used for a number of different signals. Shutter mechanisms are operated by a solenoid and are quoted as accessory items, according to individual requirements.

remote TriggeringSituations may arise where a signalling device is installed on a site with a power source available at or close to the mounting position of the siren. To trigger or switch the siren from a control room or distant site on the plant, a separate cable may be required to be installed for this application. We offer a remote control switching system to accommodate this. A transmitter is supplied to be installed at the control point and a receiver at the siren. This will allow more than one siren to be triggered by one central transmitter.

A gUIDe to seLeCtIng AnD PosItIonIng wIDe AreA sIrens

8

Ingress ProteCtIon tAbLe

Each product in this catalogue has been evaluated against the IP rating system. This is intended to allow the installer to establish the product suitablity when subjected to the elements. It must be stressed that the products have been evaluated using the first two digits of the rating system (and not certified and tested in some cases), as follows:

PrOTECTION AgAINST SOLId OBjECTS PrOTECTION AgAINST LIquIdS

0 No protection 0 No protection

1Protected against solid objects greater than50 mm, e.g. hand

1Protected against vertically falling dropsof water

2Protected against solid objects greater than12 mm, e.g. fingers

2Protected against water spray up to 15degrees from a vertical position

3Protected against solid objects greater than2.5 mm, e.g. tools

3Protected against water spray up to 60degrees from a vertical position

4Protected against solid objects greater than 41 mm, e.g. wire

4Protected against water spray from alldirections

5 Protected against dust (no harmful deposits) 5 Protected against water jets from all directions

6 Totally protected against dust

6Protected against strong water jets from all direction, e.g. off shore

7Protected against immersion between15 cm & 1 m in depth

8 Protected against long periods of immersion

9

FLAmeProoF

Hazardous AreasNote: (Classification of hazardous areas and equiptment must be undertaken by an authorised and qualified person. The following information may be used based on that assumption, as guidance.)

In SA these products must comply to the latest SANS requirements for use of explosion protected devices in hazardous areas. Visit www.sabs.co.za to see SANS 10086 - SANS 10119.

Hazardous areas are classified into zones and the following deals only with the risk due to flammable gases, vapours and mists.

• zone 0 - Where an explosive atmosphere is continuously present

• zone 1 - Where an explosive atmosphere is often present and likely to occur in normal operation

• zone 2 - Where an explosive atmosphere is not likely to occur in normal operation and if it occurs,

it is only present for a short period

gases and gas groups • group I - For Mining use

• group II - For surface use only, namely IIA, IIB, IIC

rEPrESENTATIVE gAS

CENELEC, EN50 018BS5501 PT.5

SANS 60079 FrANCE C12-230 gErMANy VdE 0171 uSA uL698

grOuP grOuP grOuP CLASS grOuP

METHANE I I IA orIB 1 D

PrOPANE IIA IIA IIA or IIB - -

ETHyLENE IIB IIB IIIA 2 C

HydrOgEN IIC IIC - 3a B

CArBON dISuLFIdE IIC* IIC - 3b -

ACETyLENE IIC IIC - 3c A

*Apparatus may not be suitable for Carbon Disulfide

gas TempreturesA gas and air mixture can ignite when it comes into close contact with an excessively hot surface. The surface temperature at which the equipment operates is therefore important and is classified as follows:

TEMP. CLASS MAX. SurFACE TEMP.

T1 450°C

T2 300°C

T3 200°C

T4 135°C

T5 100°C

T6 85°C

10

UL eXPLosIon ProoF

The UL system of classification is simlar in principle as the CENELEC system as it classifies products in terms of class, division and group, It is briefly explained as follows:

CLASS • class i gas• class ii dust• class iii Fibre

dIVISION• division i Hazardous atmosphere present under normal conditions (similar to Zone 0 & Zone 1)• division ii Hazardous atmosphere present under abnormal conditions (similar to Zone 2)

grOuPS• a,b,c & d gas (see representative gas table on page 9)• e metal dust• F carbon• g grain / chemical dust

notes

11

APPArAtUs ChArtSu

itabi

lity

of a

ppar

atus

for u

se in

Gro

up I

haza

rdou

s lo

catio

ns in

min

es

Zone

0Zo

ne 1

Zone

2Zo

ne 20

Zone

21Zo

ne 22

-Ca

tegor

y 1Ca

tegor

y 2Ca

tegor

y 3Ca

tegor

y 1Ca

tegor

y 2Ca

tegor

y 3Ca

tegor

y M1 o

r M2 (

if swi

tched

of as

requ

ired b

elow)

Intrin

sicall

y safe

elec

trical

appa

ratus

(EX

ia)Ins

trume

nts an

d ins

trume

nt co

ntrol

gear

, ligh

t fittin

gs, s

mall m

otors

and

trans

forme

rs. S

tanda

rd eq

uipme

nt po

were

d intr

insica

lly sa

fe su

pplie

sSu

itable

Suita

bleSu

itable

Suita

ble

Intris

ically

safe

electr

ical

appa

ratus

(EX

ib)elbatiuS

elbatiuSelbatiuS toN

sutarappa ai xE rof sASu

itable

but s

witch

off if

gas c

once

ntrati

ons >

1.4 %

(vo

lume f

racti

on)

Doub

le pr

otecte

d exp

losion

pr

otecte

d app

aratu

sIns

trume

nts an

d ins

trume

nt co

ntrol

gear

, pus

h butt

on st

ation

s, sw

itche

s, jun

ction

and t

ermi

nal b

oxes

, con

duit w

ith st

oppe

r box

es, c

able

gland

s, lig

ht

fitting

s, mo

tors,

switc

h gea

r, sta

rters,

distr

ibutio

n boa

rds a

nd tr

ansfo

rmer

s

Suita

bleSu

itable

Suita

bleSu

itable

Flame

proo

f app

aratu

s (Ex

D)

Instru

ments

and i

nstru

ment

contr

ol ge

ar, p

ush b

utton

stati

ons,

switc

hes,

juncti

on an

d ter

mina

l box

es, c

ondu

it with

stop

per b

oxes

, cab

le gla

nds,

light

fitt

ings,

motor

s, sw

itch g

ear,

starte

rs, di

stribu

tion b

oard

s and

tran

sform

ers

Not S

uitab

leSu

itable

Suita

bleSu

itable

but s

witch

off if

gas c

once

ntrati

ons >

1.4 %

(vo

lume f

racti

on)

Pres

suriz

ed el

ectric

al ap

para

tus

(Ex p

)elbatiuS toN

sutarappa foorpemalf rof sASu

itable

with

isola

ting i

nterlo

cks,

but s

witch

off if

gas

conc

entra

tions

> 1.

4 % (v

olume

frac

tion)

Enca

psula

ted el

ectric

al ap

para

tus

(Ex m

)As

for f

lamep

roof

appa

ratus

, but

often

in co

njunc

tion w

ith ot

her p

rotec

tion

Not S

uitab

le Su

itable

Suita

bleSu

itable

but s

witch

off if

gas c

once

ntrati

ons >

1.4 %

(vo

lume f

racti

on)

Sand

-filled

or po

wder

-filled

ele

ctrica

l app

aratu

s (Ex

q)

elbatiuSelbatiuS

elbatiuS toNsremrofsnart dna sretrats ,raeg hctiwS

Suita

ble bu

t swi

tch of

f if ga

s con

centr

ation

s > 1.

4 %

(volum

e fra

ction

)

Spec

ially

prote

cted e

lectric

al ap

para

tus (E

x s)

As fo

r flam

epro

of ap

para

tus, b

ut oft

en in

conju

nctio

n with

othe

r pro

tectio

nSu

itable

if ce

rtified

as

such

Suita

ble if

certif

ied as

su

chSu

itable

if ce

rtified

as

such

Suita

ble if

certif

ied as

such

Incre

ased

safet

y elec

trical

appa

ratus

(Ex e

)Ins

trume

nts, ju

nctio

n and

term

inal b

oxes

, con

duit w

ith st

oppe

r box

es, c

able

gland

s, lig

ht fitt

ings,

motor

s and

tran

sform

ers

Not S

uitab

leSu

itable

Suita

bl eSu

itable

but s

witch

off if

gas c

once

ntrati

ons >

1.4 %

(vo

lume f

racti

on)

Type

"n" e

lectric

al ap

para

tus (E

x n)

As fo

r incre

ased

safet

y app

aratu

s, bu

t ofte

n in c

onjun

ction

with

othe

r pr

otecti

onNo

t Suit

able

Not S

uitab

leSu

itable

Not S

uitab

le

Dust-

ignitio

n-pr

otecte

d elec

trical

appa

ratus

(DIP

)elbatiuS toN

elbatiuS toNelbatiuS toN

sutarappa foorpemalf rof sASu

itable

if DI

P A2

0 or

B20

with

IP 6

5 en

closu

res

Suita

ble if

DIP

A20,

A2

1, A2

2, B2

0 or B

21

with

IP 65

enclo

sure

s

Suita

ble if

DIP

A20,

A21,

B20 o

r B21

with

IP

65 en

closu

res

Not S

uitab

le

Sepa

rate

certif

icatio

n for

thes

e loc

ation

s is g

ener

ally r

equir

ed

snoitacilppa II puorG gninim-non ni senoz suoirav eht ni esu rof sutarappa fo ytilibatiuS

sutarappA

Explo

sion p

rotec

tion

Type

s of a

ppar

atus t

o whic

h pro

tectio

n can

be ap

plied

Sepa

rate

certif

icatio

n for

thes

e loc

ation

s is g

ener

ally r

equir

ed

Sepa

rate

certif

icatio

n for

thes

e loc

ation

s is g

ener

ally r

equir

ed.

Suita

ble bu

t swi

tch of

f if ga

s con

centr

ation

s > 1.

4 % (v

olume

fra

ction

) Se

para

te ce

rtifica

tion f

or th

ese l

ocati

ons i

s gen

erall

y req

uired

a Cate

gorie

s rela

te to

the A

TEX

Dire

ctive

as di

scus

sed i

n ARP

0108

Sepa

rate

certif

icatio

n for

thes

e loc

ation

s is g

ener

ally r

equir

ed

Sepa

rate

certif

icatio

n for

thes

e loc

ation

s is g

ener

ally r

equir

ed

Sepa

rate

certif

icatio

n for

thes

e loc

ation

s is g

ener

ally r

equir

ed

Sepa

rate

certif

icatio

n for

thes

e loc

ation

s is g

ener

ally r

equir

ed

Sepa

rate

certif

icatio

n for

thes

e loc

ation

s is g

ener

ally r

equir

ed

Sepa

rate

certif

icatio

n for

thes

e loc

ation

s is g

ener

ally r

equir

ed

12

DeCIbeL VersUs DIstAnCe ChArt

Sound attenuation at higher frequencies 0 - 500Hz - 0 dB(A)500 - 1000Hz - 3 dB(A)1000 - 2000Hz - 5 dB(A)2000 - 4000Hz - 9 dB(A)

1. Determine the sound output of your device2. Determine the sound frequency of the unit and see the dB variance3. Subtract the dB variance of your device from the sound output at one meter.4. Now go down the column to determine the sound output at a given distance.5. The ideal sound level can be between 40-60 dB depending on the observer’s hearing.

Examples of industry noise levels in dB(A)

13

Banshee Mono

Sirenco 1500S

Sirenco H150

Air Operated

Sirenco 10S

Banshee Duplo

Sirenco 2D

Sirenco H200

Hydraulic

Sirenco 15D

Sirenco 3LF Sirenco 3LF Vertical

Anti Ice Shutter Valve

Sirenco 5S

Sirenco EX H200

Motorised Sirens (pages 21-24)

Hand Operated Sirens (pages 34-37)

MO

TOr

ISEd

SIr

ENS

Long range Sirens (pages 25-33)

LON

g r

AN

gE

SIr

ENS

HA

Nd

OPE

rA

TEd

SIr

ENS

AIr

AN

d H

yd

rA

uLI

C S

IrEN

S

InDeX

Sirenco 500SL Sirenco 1000SL

Sirenco LK100

Air and Hydraulic Sirens (pages 38-39)

14

Air Horn 370 Hz

Banshee EX MonoSiren S1

Banshee EX 26S Siren S1

Banshee Ex Duplo Siren & Beacon Xenon/LED Combo S1

Sirenco 6” Bell

Air Horn 660 Hz

Banshee EX Duplo Siren S1

Banshee EX 26D Siren S1

Sirenco Solenoid Bell

Sirenco HE36 HooterSirenco Motorised Hooter

Sirenco Solenoid Bell - Single Stroke

Banshee EX Multi Sounder S1

Banshee EX Multi Sounder & Beacon LED Combo S1

Telkom Relay

Banshee EX Xenon Beacon S1

Banshee EX LED Beacon S1

Banshee EX Mono Siren & Beacon LED/Xenon Combo S1

Banshee EX Multi Sounder & Beacon Xenon Combo S1

Hooters (pages 40-44)

Bells (pages 45-47)

Flame Proof devices (pages 48-61)

HO

OTE

rS

BEL

LSFL

AM

E Pr

OO

F d

EVIC

ES

InDeX

Banshee Ex Lite S1 Banshee Ex Floodlight S1 BansheeEx Terminal Box S1

15

InDeX

Banshee Multitone Excel Cybertone Ban F1

Banshee Combined units (pages 62-64)

Electronic Sounders (pages 65-67)

Beacons Banshee (pages 68-71)

Banshee Combo ML & MX

Banshee Combo DL & DX

Banshee Flashtone Excel Lite

Banshee Beacons Sirenco Beacons Sirenco Xen & LED Magnetic Base

Sirenco RotatingMagnetic Base

CO

MB

INEd

uN

ITS

ELEC

TrO

NIC

SO

uN

dEr

SB

EAC

ON

S B

AN

SHEE

Sirenco Emergency Flare

Sirenco IS Portable Beacon

Sirenco Emergency Flare6 Pack

Emergency Flare (pages 72-73)

IS Portable Beacon (page 74)

EMEr

gEN

Cy

FLA

rE

IS P

Or

TAB

LE B

EAC

ON

16

E2S A100 Sounder &AL100 Combo


Hand Held Horn School and Factory Timer


E2S Son F1 Sounder

Megaphones


E2S A141 Sounder

Other units (page 75-76)

Son F1 range (page 77)

A range - Sounder and Combination units (page 78-82)

Explosion Proof devices (page 83-91)

OTH

Er u

NIT

SSO

N F

1 r

AN

gE

A r

AN

gE

- SO

uN

dEr

& C

OM

BIN

ATI

ON

uN

ITS

EXPL

OSI

ON

Pr

OO

F d

EVIC

ES

InDeX

E2S Ex 05 Beacon

E2S Ex 12 Sounder

E2S Ex 10 Beacon E2S Ex 11 SounderE2S Ex 15 Beacon E2S Ex 1105 Combo

EX Break Glass Call Point

EX Push Button Call Point

EX Tool Reset Call Point

17

InDeX

IS range (page 92-99)

Beacons E2S (page 100-101)

IS r

AN

gE

BEA

CO

NS

E2S

E2S IS MinialarmSounder

IS Tool Reset Call Point

E2S LED Beacons

E2S IS MinialertCombo

E2S Xenon Beacons

E2S IS L101 Beacon

IS Push Button Call Point

E2S IS Minialite Beacon

E2S IS A105 Sounder

IS Break Glass Call Point

Marine range (page 102-106)

MA

rIN

E r

AN

gE

E2S MA121 Marine Sounder

E2S MA112 Marine Sounder

E2S Marine 5 Beacon E2S Marine 10 Beacon E2S Marine Combo

18

InDeX

Son 4 (page 107-108)

SON

4

E2S Son 4 XenonE2S Son 4 LED

E2S A112 & AL112 Appello Speech & Tone

E2S A105 & AL105 Appello Speech & Tone

Appello range (page 109-110)

APP

ELLO

rA

Ng

E

E2S GPH Horn Flush Mount

E2S GPH Horn Surface Mount

gPH Horns (page 111-112)

gPH

HO

rN

S

Hootronic (page 113-116)

HO

OTr

ON

IC

E2S HMA121 Hootronic Sounder

E2S HMCA112 Hootronic Sounder & Beacon Combo

E2S HA121 Hootronic Sounder

E2S HAL121 Hootronic Sounder & Beacon Combo

19

InDeX

Spectra B200FLF FlashingFilament Beacon

Spectra B300STR Xenon Beacon

Spectra B300RTH RotatingHalogen Beacon


Spectra B300SLH StatusHalogen Beacon

Spectra B300LDA LED Multi-Function Array Beacon

Spectra B200LDA LED Beacon

Spectra B300FLH BlinkingHalogen Beacon

Spectra B400SLF Status Filament Beacon

Spectra B300SLF Status Filament Beacon

Spectra B300STS Synchronised Beacon

Spectra B400FLF Blinking Filament Beacon

Spectra B300FLF Blinking Filament Beacon

Spectra B300STF Dual Frequency Xenon Beacon


Beacons Spectra (page 117-141)

BEA

CO

NS

SPEC

TrA

Spectra B100SLF StatusFilament Beacon

Spectra B100FLF FlashingFilament Beacon


Spectra B100LDA LED Beacon

Spectra B200SLF StatusFilament Beacon

Spectra B400SLH StatusHalogen Beacon

Spectra B400FLH BlinkingHalogen Beacon

Spectra B400STS Synchronised Xenon Beacon

Spectra B400RTH Rotating Halogen Beacon

Spectra B400LDA LED Multi-Function Array Beacon

20

Sirenco Petrol EnginePowered Turbo Blower

InDeX

Panel Mount Indicators (page 142-146)

Traffi c Lights (page 147-151)

Spectra Sounders & Combination units (page 152-156)

Turbo Blower (page157-158)

PAN

EL M

Ou

NT

INd

ICA

TOr

STr

AFF

IC L

IgH

TSSP

ECTr

A S

Ou

Nd

ErS

& C

OM

BIN

ATI

ON

uN

ITS

Tur

BO

BLO

WEr

Spectra B350TLA LED Array

Spectra B300SND &B400SND sounder

Spectra B350TSB Filament Lamp

Spectra H100B Horn &H100BL Combo

Spectra B450TLA LED Array

Sirenco Panel Mount Indicators

Spectra H100T TrumpetHorn & H100TX Combo

E2S 22D Panel Mount Indicators

Spectra B450TSB Filament Lamp

Sirenco Panel Mount Buzzer

Spectra H110T TrumpetHorn & H110TX Combo

Sirenco ElectricPowered Turbo Blower

E2S 28D Panel Mount Buzzers

Spectra B450TDB Dual Filament

Sirenco Panel MountCombination Unit

Spectra Signal TowerStack Lights 70mm

VOLTAgE rEFErENCE: In this catalogue the following voltages are compatable 220 Vac = 250 Vac, 380 Vac = 400 Vac and 525 Vac = 550 Vac

Please visit our website for all the latest information, www.kama.co.za.

21

MO

TOr

ISEd

SIr

ENS

- SI

rEN

CO

500

SL

MOTORISED SIRENS

sIrenCo 500sL

compact and powerful siren constructed from uV stabilised polycarbonate. ideal for all signalling or alarm applications where a lightweight motorised siren is required.

VOLTAgE VOLTAgE12 VAC/dC 24 VAC/dC

110 VAC/dC 220 VAC/dC

SPECIFICATIONSVOLTAgE 12 Vac/dc 24 Vac/dc 110 Vac/dc 220 Vac/dc

duTy CyCLE 5min on - 10min off

SOuNd OuTPuT 107 dB(A) at 1m

SOuNd FrEquENCy 1 400Hz

APP. rANgE 500m in still air on open field

CurrENT CONSuMPTION* 12V - 10.6A 24V - 7.5A 10V - 1.0A 220V - 0.7A

IP rATINg IP 45

WEIgHT 1.1kg

PACkINg dIMENSIONS 190x140x155mm

All dimensions in mm

* start-up current x 8


22

MO

TOr

ISEd

SIr

ENS

- SI

rEN

CO

100

0SL

compact and powerful siren constructed from a uV stabilised polycarbonate. ideal for all signalling or alarm applications where a lightweight motorised siren is required.




duTy CyCLE 5min on - 10min off



APP. rANgE 1 000m in still air on open field

CurrENT CONSuMPTION* 12V - 17.4A 24V - 8.8A 110V - 1.9A 220V - 1.0A

IP rATINg IP 45

WEIgHT 1.2kg


MOTORISED SIRENS

sIrenCo 1000sL




23

MO

TOr

ISEd

SIr

ENS

- B

AN

SHEE

MO

NO

MOTORISED SIRENS

bAnshee mono

a robust, pressure die cast aluminium siren with a powerful lower frequency sound output. dual cable entry for looping cable connection. back cover removes for easy access to do cable connection. universal motor with replaceable parts. neat powder coated finish in grey is a standard colour. ideal for signalling or alarm applications.




duTy CyCLE 1 minute on - 8 minutes off


SOuNd FrEquENCy 950-1 200Hz


MOTOr Brush motor with roller bearing & guide bush - 6400 rpm

CurrENT CONSuMPTION* 12V - 9A 24V - 6A 110V - 1.5A 220V - 0.5A

IP rATINg IP 65

WEIgHT 1.6kg





24

a robust, pressure die cast aluminium siren with a powerful lower frequency sound output. dual cable entry for looping cable connections. back cover removes for easy access to do cable connection. universal motor with replaceable parts. neat powder coated finish in yellow as a standard colour. ideal for signalling or alarm applications.

SPECIFICATIONSVOLTAgE 12 Vdc 24 Vdc 110 Vac/dc 220 Vac/dc

duTy CyCLE 10 Hours continuous

SOuNd OuTPuT 12V - 110 dB(A) at 1m 24V - 113 dB(A) at 1m 110/220V - 116 dB(A at 1m)

SOuNd FrEquENCy 950 - 1 200Hz


MOTOr Brush motor with double roller bearing - 8 000 rpm

CurrENT CONSuMPTION* 12V - 3A 24V - 5.25A 110V - 2A 220V - 1A

IP rATINg IP 65

WEIgHT 2.5kg


MOTORISED SIRENS

bAnshee DUPLo

VOLTAgE VOLTAgE12 / 24 VdC 110 VAC/dC

220 VAC/dC -

MO

TOr

ISEd

SIr

ENS

- B

AN

SHEE

du

PLO




25

LON

g r

AN

gE

SIr

ENS

- SI

rEN

CO

150

0S

LONG RANGE SIRENS

a weatherproof, rugged cast aluminium siren with a very powerful low frequency output. ideally suited for use in factories, refineries, quarries, construction and industrial sites, as well as both underground and surface non-fiery mines. thermal cut out protected.

SPECIFICATIONSVOLTAgE 110 Vac/dc 220 Vac/dc

duTy CyCLE Continuous (thermal cut out protected)



APP. rANgE 1 500m in still air on open fi eld

MOTOr Brush motor with roller bearing

CurrENT CONSuMPTION* 110V - 5A 220V - 3.5A

IP rATINg IP 55 (IP 65 available on request)

WEIgHT 6.6kg



sIrenCo 1500s




26

LON

g r

AN

gE

SIr

ENS

- SI

rEN

CO

2d

LONG RANGE SIRENS

totally enclosed, robust, all weather cast aluminium siren with a very powerful low dual frequency output. ideally suited for use in factories, refineries, quarries, constuction and industrial sites, as well as both undergound and surface non-fiery mines. thermal cut out protected.


SPECIFICATIONSVOLTAgE 110 Vac 220 Vac

duTy CyCLE Continuous (Thermal cut out protected)


SOuNd FrEquENCy 370/660Hz


MOTOr Brush motor with roller bearing - 4 000rpm


IP rATINg IP 55 (IP 65 available on request)

WEIgHT 8.2kg


sIrenCo 2D




27

LON

g r

AN

gE

SIr

ENS

- SI

rEN

CO

3LF

LONG RANGE SIRENS

Very durable weather proof siren manufactured from the highest quality cast aluminium with a very powerful low frequency output. ideally suited for use in factories, refineries, quarries, construction and industrial sites, as well as both underground and surface non-fiery mines.

VOLTAgE VOLTAgE220 VAC/dC 380 VAC (3ø)

525 VAC (3ø)

SPECIFICATIONSVOLTAgE 220 Vac 380 Vac (3ø) 525 Vac (3ø)

duTy CyCLE Continuous


SOuNd FrEquENCy 560Hz


MOTOr 1.1 KW motor - 2875 rpm

CurrENT CONSuMPTION* 220V - 9A 380V - 5A 525V - 2A

IP rATINg IP 55 (IP 65 or IP 56 available on request)

WEIgHT 22kg


sIrenCo 3LF




28

LON

g r

AN

gE

SIr

ENS

- SI

rEN

CO

3LF

VEr

TIC

AL

LONG RANGE SIRENS

durable weather proof siren manufactured from the highest quality cast aluminium with a very powerful low frequency output. ideally suited for use in factories, refineries, quarries, construction and industrial sites, as well as both underground and surface non-fiery mines.


524 VAC (3ø)

sIrenCo 3LF VertICAL



SPECIFICATIONSVOLTAgE 220 Vac 380 Vac (3ø) 524 Vac (3ø)





MOTOr 1.1 KW motor - 2875 rpm

CurrENT CONSuMPTION* 220V - 9A 380V - 5A 524V - 2A


WEIgHT 22kg



29

total robust, rugged cast aluminium siren with a very powerful low frequency output. ideally suited for use in factories, refineries, quarries, construction and industrial sites, as well as both underground and surface non-fiery mines.


525 VAC (3ø)

SPECIFICATIONSVOLTAgE 220 Vac 380 Vac (3ø) 525 Vac(3ø)





MOTOr 2.2KW motor - 2 875rpm

CurrENT CONSuMPTION* 220V - 9.5A 380V - 5A 525V - 3A


WEIgHT 50kg


LON

g r

AN

gE

SIr

ENS

- SI

rEN

CO

5S

LONG RANGE SIRENS

sIrenCo 5s




30

LON

g r

AN

gE

SIr

ENS

- SI

rEN

CO

10S

LONG RANGE SIRENS

sIrenCo 10s

Precision machined aluminium body with all weather enclosed, continuously rated motor. ideally suited for use in factories, refineries, quarries, construction civil defence and industrial sites, as well as both underground and surface non-fiery mines.

VOLTAgE VOLTAgE380 VAC (3ø) 525 VAC (3ø)

SPECIFICATIONSVOLTAgE 380 Vac (3ø) 525 Vac (3ø)





MOTOr 4 KW motor - 2875 rpm

CurrENT CONSuMPTION* 380V - 10A 525V - 6A


WEIgHT 68kg





31

VOLTAgE VOLTAgE380 VAC (3ø) 525 VAC (3ø)

SPECIFICATIONSVOLTAgE 380 Vac (3ø) 525 Vac (3ø)



SOuNd FrEquENCy 480/560Hz


MOTOr 7.5KW motor - 2875rpm



WEIgHT 118kg


all-weather enclosed motor is ideally suited for outdoor use. this siren would be used for audible warning at mines, industries and refineries, oil rigs, in the event of fires and open-cast mining operations. this precision machined unit produces a powerful low dual frequency sound that is ideal for long distance signalling.



LONG RANGE SIRENS

sIrenCo 15D

LON

g r

AN

gE

SIr

ENS

- SI

rEN

CO

15d


32

LON

g r

AN

gE

SIr

ENS

- SI

rEN

CO

AN

TI-I

CIN

g

LONG RANGE SIRENS

sIrenCo AntI-ICIng

the anti-icing unit is ideally suited for outdoor use in extreme cold conditions. this anti-icing unit is used in conjunction with the sirenco 5s, 10s and 15d at refineries. the anti-icing unit has an element mounted in the housing of the siren, this prevents the siren from freezing to allow the siren to run according to specification.

SPECIFICATIONSVOLTAgE 220Vac


CurrENT CONSuMPTION The 220V anti icing unit will run from a 15 Amp power supply. At the lowest setting the unit will maintain the siren temperature at approximately 15ºC and consume about 1.3 Amps. Should ambient conditions increase in demand, a higher temperature can be adjusted by a control knob.

IP rATINg IP 65

FITTINg The elements are fitted into the back of the impeller housing. This is done during the Manufacturing process of the siren. The unit cannot be fitted on existing sirens and should be ordered separately as an additional feature.

MOuNTINg Anti-Icing units are mounted on request; heating elements are embedded in the impeller housing. The temperature is controlled to prevent the unit from icing up, when ambient temperature drops below freezing.

HEATINg ELEMENT The element temperature is controlled by a solid state relay and can be set to keep the unit between 8ºC and 15ºC.

POWEr SuPPLy The power supply to the heating element is constantly on and is independent from the power supply that activates the siren. Two separate power supplies are to be installed.




33


SPECIFICATIONSVOLTAgE 220V

CurrENT CONSuMPTION 220V - 1A

IP rATINg IP 55

LONG RANGE SIRENS

sIrenCo shUtter VALVe

LON

g r

AN

gE

SIr

ENS

- SI

rEN

CO

SH

uTT

Er V

ALV

E

500

220Vac Supply

14585

6


34

HA

Nd

OPE

rA

TEd

SIr

EN -

SIr

ENC

O H

100

HAND OPERATED SIRENS

sIrenCo h100

SPECIFICATIONSVOLTAgE Hand Operated



APP. rANgE 500m in still open field

MOTOr Sealed gearbox crank handle with ratchet

WEIgHT 1.2kg

PACkINg dIMENSIONS 15.5x15.5x16mm

this cast aluminium siren is designed as a backup alarm when there is a power failure or applications in remote areas where no electricity is available, blasting sites etc. this is a simple, maintenance free siren with a sealed gearbox.



35

HA

Nd

OPE

rA

TEd

SIr

EN -

SIr

ENC

O H

150

TrIP

Od


sIrenCo h150 trIPoD






WEIgHT 5.1kg


this cast aluminium siren is designed as a backup alarm when there is a power failure or applications in remote areas where no electricity is available, blasting sites etc. this is a simple, maintenance free siren with a sealed gearbox. the lightweight tripod stand can be folded up for easy transport and is height adjustable.



36






WEIgHT 12kg


this cast aluminium siren is designed as a backup alarm when there is a power failure or applications in remote areas where no electricity is available, blasting sites etc. the handle on top of the siren can be selected to alter the sound output. this is a simple, maintenance free siren with a sealed gearbox.

sIrenCo h200

HA

Nd

OPE

rA

TEd

SIr

ENS

- SI

rEN

CO

H20

0




37






CLASSIFICATION EX s 1/2 T6 Gb Db

CErTIFICATION SAEX MS/11-052X

gAS grOuP I, II

IgNITION grOuP T6 - 85ºC

WEIgHT 13.5kg

PACkINg dIMENSIONS 560mmx360mmx450mm

the sirenco ex H200 model is a cast aluminium siren, designed as a backup alarm when there is a power failure or applications in remote areas where no electricity is available, ex areas etc. the handle on top of the siren can be oscillated to alter the sound output. this is a simple, maintenance free siren with a sealed gearbox.


HA

Nd

OPE

rA

TEd

SIr

ENS

- SI

rEN

CO

EX

H20

0

sIrenCo eX h200


300

R95

156

223

17

30

45

140

323


38

OTH

Er S

IrEN

S -

SIr

ENC

O A

Ir O

PEr

ATE

d

OTHER SIRENS

sIrenCo AIr oPerAteD

SPECIFICATIONSVOLTAgE Self cooling air driven motor

duTy CyCLE Continuously rated




MOTOr Air driven motor

AIr PrESSurE 7 bar (100psi) max

IP rATINg IP 44

WEIgHT 2kg


robust aluminium siren with an air operated motor. designed for applications where a siren is required and air pressure is available, i.e. earth moving machines and other pneumatically operated equipment.



39

SPECIFICATIONSVOLTAgE Hydraulic motor





MOTOr Hydrostatically balanced hydraulic motor with automatic lateral adjustment

HydrAuLIC PrESSurE 240 bar max - Continuous 275 bar max - Intermittent

IP rATINg IP 44

WEIgHT 4kg

PACkINg dIMENSIONS 175x 65x200mm

durable all-weather aluminium siren with a hydraulic motor. designed for applications where a siren is required and hydraulic oil pressure is available, i.e. hydraulic operated earth moving machines and other hydraulically operated equipment.

OTH

Er S

IrEN

S -

SIr

ENC

O H

yd

rA

uLI

C S

IrEN

OTHER SIRENS

sIrenCo hyDrAULIC sIren



40

SPECIFICATIONSVOLTAgE Air driven diaphragm





MOTOr Air driven diaphragm

AIr PrESSurE 7 bar or between 350 to 1000 Kpa

IP rATINg IP 44

WEIgHT 2.8kg


robust aluminium siren with an air operated motor. designed for applications where a siren is required and air pressure is available, i.e. earth moving machines and other pneumatically operated equipment.

HO

OTE

rS

- SI

rEN

CO

AIr

HO

rN

370

Hz

HOOTERS

sIrenCo AIr horn 370 hz



41

SPECIFICATIONSVOLTAgE Air driven diaphragm





MOTOr Air driven diaphragm

HydrAuLIC PrESSurE 7 bar or between 350 to 1 000 Kpa

IP rATINg IP 44

WEIgHT 2.4kg


the air horn is precision machined from an aluminium casting designed to withstand the rigours normally encountered in commercial applications. air horns have been specially designed to meet the warning needs for the south african transport, marine and industrial applications. a High frequency air operated device with excellent sound penetration.

HO

OTE

rS

- SI

rEN

CO

AIr

HO

rN

660

Hz

HOOTERS

sIrenCo AIr horn 660 hz



42

HO

OTE

rS

- SI

rEN

CO

MO

TOr

ISEd

HO

OTE

r

HOOTERS

SPECIFICATIONSVOLTAgE 12 Vdc 24 Vdc 110 Vac 220 Vac

duTy CyCLE 1 minute on - 8 minutes off



APP. rANgE 2 000m

CurrENT CONSuMPTION 12Vdc - 5A 24Vdc - 2.3A 110Vac - 0.84A 220Vac - 0.76A

IP rATINg IP 45

WEIgHT 3kg

PACkINg dIMENSIONS 29.5mmx29.5mmx15.5mm

sIrenCo motorIseD hooter

the air horn is precision machined from an aluminium casting designed to withstand the rigours normally encountered in commercial applications. air horns have been specially designed to meet the warning needs for the south african transport, marine and industrial applications. a High frequency air operated device with excellent sound penetration.


VOLTAgE VOLTAgE12 VdC 110 VAC

24 VdC 220 VAC


43

HO

OTE

rS

- SI

rEN

CO

HE3

6 H

OO

TEr

HOOTERS

SPECIFICATIONSVOLTAgE 12 Vac 24 Vac 110 Vac 220 Vac





MOTOr Moving coil diaphragm

CurrENT CONSuMPTION 12V - 5.3A 24V - 2.7A 110V - 0.5A 220V - 0.3A

IP rATINg IP 44

WEIgHT 1.1kg


VOLTAgE VOLTAgE12 VAC 24 VAC

110 VAC 220 VAC

sIrenCo he36 hooter

this electric horn is suitable for applications where a low frequency sound is required. this hooter is often used as an extension bell for telephone systems and can be connected to a telephone line and will trigger the horn with 220 Vac when a ring is detected on the telephone line.



44

HO

OTE

rS

- T

ELk

OM

rEL

Ay

HOOTERS

SPECIFICATIONSVOLTAgE 220 Vac and trigger voltage supplied via telephone line

OPErATINg ArEA Indoor use only

IP rATINg IP 44

WEIgHT 250g


VOLTAgE VOLTAgE220 VAC -

teLkom reLAy

the telkom relay works in conjunction with the He36 hooter or any other instantaneous operating device. the relay detects the ring signal on a telephone line and is used to pulse the hooter to give the “ringing” effect when triggered.



45

BEL

LS -

SIr

ENC

O 6

” B

ELL

BELLS

SPECIFICATIONSVOLTAgE 24 Vdc 24 Vac 110 Vac 220 Vac





CurrENT CONSuMPTION 24Vdc - 11mA 24Vac - 16mA 110V - 25mA 220V - 20mA

IP rATINg IP 44

WEIgHT 420g


VOLTAgE VOLTAgE12 VAC 12 VdC

110 VAC 220 VAC

sIrenCo 6” beLL

the innovative and durable range of motor driven fire alarm bells offers an excellent sonorous tone, high sound output and proven reliability. the 150 mm version features the revolutionary aluminium gong offering enhanced acoustics and greater sound output.



46

BEL

LS -

SIr

ENC

O S

OLE

NO

Id B

ELL

BELLS






CurrENT CONSuMPTION 24Vdc- 25mA 24Vac - 25mA 110V - 25mA 220V - 25mA

IP rATINg IP 44

WEIgHT 420g



110 VAC 220 VAC

sIrenCo soLenoID beLL

the innovative and durable range of solenoid reliability. the 150mm version features the solenoid with plunger hitting the steel powder coated gong offering enhanced acoustics and greater sound output.



47

BEL

LS -

SIr

ENC

O S

OLE

NO

Id B

ELL

- SI

Ng

LE S

TrO

kE

BELLS

SPECIFICATIONSVOLTAgE 110 Vdc (Single Stroke)



SOuNd FrEquENCy 1 100 Hz


CurrENT CONSuMPTION 110V - 25mA

IP rATINg IP 44

WEIgHT 420g


VOLTAgE VOLTAgE110 VdC -

sIrenCo soLenoID beLL - sIngLe stroke

this innovative and durable range of solenoid bells offers a high sound output and proven reliability. the 150 mm version features the solenoid with plunger hitting the steel powder coated gong offering enhanced acoustics and greater sound output.



48

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

MO

NO

SIr

EN S

1

FLAME PROOF DEVICES

SPECIFICATIONSVOLTAgE 12 Vac/dc 24 Vac/dc

duTy CyCLE 1 min. on and 8 min. off





CLASSIFICATION Exd I / IIC 150°

CErTIFICATION MS - XPL / 06849

gAS grOuPS I, IIA, IIB, IIC

IgNITION grOuP T6 - 85°C

WEIgHT 11,3kg



bAnshee eX mono sIren s1

this motorised siren is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flame proof cable gland. the unit consists of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.




49

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

du

PLO

SIr

EN S

1

FLAME PROOF DEVICES


duTy CyCLE 10 hours Continuous



APP. rANgE 1 000m in still air on an open field






WEIgHT 11,3kg



bAnshee eX DUPLo sIren s1

this motorised siren is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flame proof cable gland. the unit consists of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.




50

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

Mu

LTI S

Ou

Nd

Er S

1

FLAME PROOF DEVICES


duTy CyCLE Continuous rated



APP. rANgE 800m in still air on an open field

CurrENT CONSuMPTION The amps vary from 40 - 70mA depending on the sound selection

CLASSIFICATION Exd I / IIC 150° DIP A21 (for group 21)




WEIgHT 11,3kg


VOLTAgE VOLTAgE12 VdC 24 VdC

110 VAC 220 VAC

bAnshee eX mULtI soUnDer s1

this electronic sounder is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flame proof cable gland. the unit consists of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.



51

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

XEN

ON

BEA

CO

N S

1

FLAME PROOF DEVICES



CurrENT CONSuMPTION 12V - 250mA 24V - 130mA 110V - 80mA 220V - 50mA

COLOur Amber, Red, Blue and Green (other colours available on request)

LIgHT SOurCE Xenon Tube

LIgHT OuTPuT 5 Joule





WEIgHT 11,3kg



110 VAC 220 VAC

bAnshee eX Xenon beACon s1

this xenon beacon is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flameproof cable gland. the unit consists of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.



52

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

LEd

BEA

CO

N S

1

FLAME PROOF DEVICES




COLOur Amber, Red, Blue and Green

LIgHT SOurCE 24 Hi-Bright LEDs






WEIgHT 9,5kg



110 VAC 220 VAC

bAnshee eX LeD beACon s1

this Led beacon is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flameproof cable gland. the unit consits of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.



53

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

26S

SIr

EN S

1

FLAME PROOF DEVICES


bAnshee eX 26s sIren s1



CurrENT CONSuMPTION* 110V - 2.6A 220V - 2.1A

SOuNd OuTPuT 122 dB (A) at 1m







WEIgHT 13kg


this Led siren is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flameproof cable gland. the unit consits of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.




54

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

26d

SIr

EN S

1

FLAME PROOF DEVICES


bAnshee eX 26D sIren s1


duTy CyCLE Continuous (thermal cut out protection)



SOuNd FrEquENCy 370 / 660Hz


MOTOr Brush motor with roller bearings - 4 000 rpm





WEIgHT 16kg


this motorised siren is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. Please ensure that the unit equipped with the correct flameproof cable gland. the unit consists of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.




55

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

Mu

LTI S

Ou

Nd

Er &

BEA

CO

N L

Ed C

OM

BO

S1

FLAME PROOF DEVICES



CurrENT CONSuMPTION The amps vary from 80 - 250 mA depending on sound selected

COLOur Red, Amber, Blue and Green

APP rANgE 800m in still air on open field

LIgHT SOurCE 24 Hi-Bright LEDs


CLASSIFICATION Exd I / IIC 150° 220 V - 2.1 A




WEIgHT 11,3kg



110 VAC 220 VAC

bAnshee eX mULtI soUnDer & beACon LeD Combo s1

this electronic sounder and Led beacon combination unit is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected device is required. the unit consits of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.



56

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

Mu

LTI S

Ou

Nd

Er &

BEA

CO

N X

ENO

N C

OM

BO

FLAME PROOF DEVICES







CurrENT CONSuMPTION The amps vary from 80 - 250mA depending on the sound selection





WEIgHT 11,3kg



110 VAC 220 VAC

bAnshee eX mULtI soUnDer & beACon Xenon Combo

this electronic sounder and xenon beacon combination is suitable for use in fiery mines as well as petrochemical plants and areas where an explosion-protected deviceis required. Please ensure that the unit equipped with the correct flameproof cable gland. the unit consits of a 304 type stainless steel housing with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection.



57

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

MO

NO

SIr

EN &

BEA

CO

N L

Ed/X

ENO

N C

OM

BO

S1

FLAME PROOF DEVICES


duTy CyCLE 1 min on - 8min off

CurrENT CONSuMPTION* 12V - 10A 24V - 6A 110V - 2A 220V - 1,5A


LIgHT SOurCE Xenon Tube / 24 x LEDs

SOuNd OuTPuT App Range 1000 m in still open field






WEIgHT 11,3kg



110 VAC 220 VAC

bAnshee eX mono sIren & beACon LeD/Xenon Combo s1

this mono siren and Led beacon combination unit is suitable for use in fiery mines as well as petro chemical plants and areas where an explosion-protected device is required. Please ensure that the unit is equipped with the correct flameproof cable gland. the unit consists of a steel nickel plated housing with 3 x m20 cable entries, a stainless steel nose cone and a unique screw on lid for cable connection.




58

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

du

PLO

SIr

EN &

BEA

CO

N X

ENO

N /

LEd

CO

MB

O S

1

FLAME PROOF DEVICES


duTy CyCLE 10 hours Continuous rated




CurrENT CONSuMPTION* The amps vary from 1 - 2A depending on the sound selection





WEIgHT 11,3kg



bAnshee eX DUPLo sIren & beACon Xenon / LeD Combo s1

this duplo siren and xenon / Led beacon combination unit is suitable for use in fiery mines as well as petro chemical plants and areaswhere an explosion-protected device is required. Please ensure that the unit is equipped with the correct flameproof cable gland. the unit consists of a steel nickel plated housing with 3 x m20 cable entries, a stainless steel nose cone and a unique screw on lid for cable connection.




59

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

LIg

HT

S1

FLAME PROOF DEVICES

*other voltage

avaliable on request

SPECIFICATIONSVOLTAgE 12 Vdc 220 Vac

CLASSIFICATION Exd I 150°C Ex d IIC T4 Gb


gAS grOuPS I, IIC

LIgHT SOurCE 4 x Super Bright LED’s (5W) 7 x Super Bright LED’s (7W)

LIgHT OuTPuT 49 LUX at 5m 118 LUX at 5m

CurrENT CONSuMPTION 28mA 72mA


WEIgHT ± 6kg



bAnshee eX LIght s1

the ex Light s1 is suitable for use in fiery mines, petro chemical plants, underground coal mining machinery and areas where an explosion-protected devices is required. Please ensure that the unit is equipped with the correct flame proof cable gland. the unit consists of a 304 type stainless steel body with a m20 cable entry, unique screw on lid for cable connection. the unit boasts 7 super-bright Led’s that emit 112 lux at 5m. Long life Led technology allows for longevity and low power consumption. avaliable with different colour lenses.



60

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

FLO

Od

LIg

HT

S1

FLAME PROOF DEVICES

VOLTAgE VOLTAgE12 V 220 V

bAnshee eX FLooDLIght s1

*other voltage

avaliable on request

SPECIFICATIONSVOLTAgE 12 Vdc 220 Vac

COLOurS Red, Green and White

CLASSIFICATION Exd I 150°C Mb Ex d IIC T4 Gb


LIgHT SOurCES 12 Super Bright LED’S (12W) 12 Super Bright LED’S (12W)

LIgHT OuTPuT 125 LUX at 5m 190 LUX at 5m

CurrENT CONSuMPTION 97mA 111mA

gAS grOuPS I, IIC


WEIgHT ± 11kg


the ex Floodlight s1 is sutable for use in fiery mines, petro chemical plants, underground coal mining machinery and areas where an explosion-protected devices is required. Please ensure that the unit is equipped with the correct flame proof cable gland. the unit consists of a 304 type stainless steel body with a m20 cable entry, a stainless steel nose cone and a unique screw on lid for cable connection. the unit boasts 12 super-bright Led’s that emit 190 lux at 5m. Long life Led technology allows for longevity and low power consumption.



61

FLA

ME

PrO

OF

dEV

ICES

- B

AN

SHEE

EX

TEr

MIN

AL

BO

X S

1

FLAME PROOF DEVICES

bAnshee eX termInAL boX s1

SPECIFICATIONSTyPE EX Terminal Box S1

CLASSIFICATION Exd I 150°C Ex d IIC T4 Gb

CErTIFICATION SAEX MS/11-349

gAS grOuPS I, IIA. IIB, IIC


WEIgHT 1.7kg


the ex terminal box s1 can be used in most ex environments for flameproof wiring terminations. the unit is made of 304 type stainless steel. the unit screws into m20 hole.



62

COMBINATION UNITS


duTy CyCLE 1 minute on - 8 mintues off




CurrENT CONSuMPTION* 12V - 10A 24V - 6A 110V - 2A 220V - 1.5A

LIgHT SOurCE 24 Hi-bright LED’s / Xenon tube - 5 Joule

IP rATINg IP 65

WEIgHT 2.5kg

PACkINg dIMENSIONS 140x140x270 mm


110 VAC 220 VAC

bAnshee mono Combo mL & mX

CO

MB

INA

TIO

N u

NIT

S -

BA

NSH

EE M

ON

O C

OM

BO

ML

& M

X

the mono siren with all its features is used with a flashing beacon mounted on the back cover. this unit is designed for applications where an audible and visual signal device is required. the beacon starts flashing when the siren is supplied with power. with a separate supply through the second cable entry the beacon can be connected to operate independently from the siren.




63

CO

MB

INA

TIO

N u

NIT

S -

BA

NSH

EE d

uPL

O C

OM

BO

dL

& d

X

COMBINATION UNITS

SPECIFICATIONSVOLTAgE 24 Vdc 110 Vac 220 Vac

duTy CyCLE 10 Hours continuous rated




MOTOr Brush motor with double roller bearing - 8 000 rpm

CurrENT CONSuMPTION* 24Vdc - 6A 110V - 2.5A 220 V - 1.5A

LIgHT SOurCE 24 Hi-bright LEDs / Xenon tube

IP rATINg IP 65

WEIgHT 2.5kg

PACkINg dIMENSIONS 140 x140x270mm

VOLTAgE VOLTAgE- 24 VdC

110 VAC 220 VAC

bAnshee DUPLo Combo DL & DX

the duplo siren with all its features is used with a flashing beacon mounted on the back cover. this unit is designed for applications where an audible and visual signal device is required. the beacon starts flashing when the siren is supplied with power. with a separate supply through the second cable entry the beacon can be connected to operate independently from the siren.




64

ELEC

TrO

NIC

SO

uN

dEr

S -

BA

NSH

EE F

LASH

TON

E EX

CEL

LIT

E

bAnshee FLAshtone eXCeL LIte

VOLTAgE VOLTAgE9-30 VdC 110 VAC

220 VAC -

SPECIFICATIONSVOLTAgE 9 – 30 Vdc 110Vac 220Vac

COLOurS Amber, Yellow, Red, Green and Blue


SOuNd OuTPuT 110dB



CurrENT CONSuMPTION 12V - 90mA 24V - 40mA

IP rATINg IP 45 Standard base IP 66 Deep base

WEIgHT 220g


the banshee Flashtone excel Lite combines the modern aesthetics of the banshee excel sounder with a very bright and efficient xenon beacon to create a strobe/sounder combination. the banshee excel will suit the majority of fire and security needs where conventional sound requires the back up of a visual alarm.


COMBINATION UNITS


65

VOLTAgE VOLTAgE9-30 VdC 110 VdC

220 VAC -

ELEC

TrO

NIC

SO

uN

dEr

S -

BA

NSH

EE M

uLT

ITO

NE

EXC

EL

ELECTRONIC SOUNDERS

SPECIFICATIONSVOLTAgE 9 – 30 Vdc 110Vac 220Vac


SOuNd OuTPuT 110dB



CurrENT CONSuMPTION Max. 40mA

IP rATINg IP 45 Standard base IP 66 Deep base

WEIgHT 200g


bAnshee mULtItone eXCeL

the banshee multitone excel represents the most modern, acoustically advanced range of electronic sounders. it comes with 32 user selectable tones incorporating low/high frequencies. the excel is renowned for its 360º sound dispersal. the sound output can be decreased by means of dipswitches in the base of the unit. units are available in red, grey & white.



66

ELEC

TrO

NIC

SO

uN

dEr

S -

BA

NSH

EE C

yB

ErTO

NE

ELECTRONIC SOUNDERS




SOuNd FrEquENCy 2500 - 3000Hz


SOuNd SELECT 4 sounds selectable

CurrENT CONSuMPTION 12V - 30mA 24V - 25mA 32V - 25mA 110/220 V on request

IP rATINg IP 45

WEIgHT 64g


VOLTAgE VOLTAgE12 VdC 24 VAC/dC

32 VAC/dC 110/220 VAC

bAnshee Cybertone

a durable panel mount sounder with the variable moving coil diaphragm sound capsule. this sounder will outlast most other panel mount sounders. the 4 sounds can be selected, depending on the way the model is connected. a connecting diagram is included with each model.



67

ELEC

TrO

NIC

SO

uN

dEr

S -

BA

N F

1 SO

uN

dEr

ELECTRONIC SOUNDERS

bAn F1 soUnDer

SPECIFICATIONSVOLTAgE 10-30 Vdc 24 Vac 110/220 Vac



SOuNd FrEquENCy 340 / 2 400Hz (depends on tone selection)

SOuNd SELECT 10 user selectable tones with a 2 stage alarm option


CurrENT CONSuMPTION 10-30V - 25mA 24V - 40mA 110/220V - 30mA

IP rATINg IP 55 - can be increased to IP 56 with WR kit

WEIgHT 260g


these units have been designed to perform at a maximum capacity for as long as required. the sound output can be decreased by means of a volume control. increased protection can be achieved by the use of a wr kit which needs to be ordered with the unit.


110/220 VAC -



68

BEA

CO

NS

- B

AN

SHEE

LEd

& X

ENO

N B

EAC

ON

S

BEACONS

bAnshee LeD & Xenon beACons

SPECIFICATIONSVOLTAgE 12 Vdc 24 Vdc 110/220 Vac

COLOur LEd Red, Amber and Green

COLOur XENON Red, Amber, Green and Blue

LIgHT SOurCE LEd 24 Hi-bright LED’s

LIgHT SOurCE XENON Xenon tube - 5 Joules

FLASH rATE LED - approximately 50 / min; Xenon - 45 to 60/ min

CurrENT CONSuMPTION LEd

CurrENT CONSuMPTION XENON

12V - 180mA 24V - 120mA 110/220V - 70mA

IP rATINg IP 65

WEIgHT 475g


available in a xenon and Led version. the units are designed to produce approximately 45 to 65 flashes per minute and this is determined by a variation in the voltage supplied. the Led units can be selected to be a static or flashing beacon by a jumper on the circuit board. the extremely robust dome make this one of the strongest beacons on the market.


110/220 VAC -



69

BEA

CO

NS

- SI

rEN

CO

BEA

CO

NS

BEACONS

sIrenCo beACons


110/220 VAC -

SPECIFICATIONSVOLTAgE 12 Vdc 24 Vdc 110/220 Vac

COLOurS Red, Amber, Blue or Green

LIgHT SOurCE XENON Xenon tube

FLASH rATE Xenon - 45 to 60 p/min

CurrENT CONSuMPTION 12V - 115mA 24V - 115mA 110/220V - 115mA

IP rATINg IP 44

WEIgHT 130g


the low current sirenco xenon beacons combine excellent efficiency with high light output. the interchangeable polycabonate lenses are available in four different colours - red, blue, amber and green.



70

BEA

CO

NS

- SI

rEN

CO

XEN

ON

BEA

CO

N W

ITH

MA

gN

ETIC

BA

SE

BEACONS

sIrenCo Xenon beACon wIth mAgnetIC bAse

VOLTAgE VOLTAgE12-80 VdC -

SPECIFICATIONSVOLTAgE 12 - 80 Vdc

COLOur Red, Amber, Green and Blue

LIgHT SOurCE Xenon tube - 1.5 Joules

FLASH rATE Xenon - 45 to 80 flashes p/min (depending on setting)

CurrENT CONSuMPTION 0.25A - Single 0.5A - Double 0.5A - Triple

IP rATINg IP 66

WEIgHT 850g


available in a single, double and triple flash version. the unit comes standard with a twirly cord that fits in the lighter socket of the vehicle and a magnetic base.



71

BEA

CO

NS

- SI

rEN

CO

rO

TATI

Ng

BEA

CO

N W

ITH

MA

gN

ETIC

BA

SE

BEACONS

sIrenCo rotAtIng beACon wIth mAgnetIC bAse

SPECIFICATIONSVOLTAgE 12 Vdc 24 Vdc

COLOurS Red, Amber, Blue or Green

LIgHT SOurCE Halogen Bulb

FLASH rATE 105 p/min

CurrENT CONSuMPTION 12V - 4A 24V - 3A

IP rATINg IP 66

WEIgHT 980g



the unit comes standard with a twirly cord that fits in the lighter socket of the vehicle and a magnetic base.



72

EMEr

gEN

Cy

FLA

rE

- SI

rEN

CO

EM

Erg

ENC

y F

LAr

E

EMERGENCY FLARE

sIrenCo emergenCy FLAre

SPECIFICATIONSVOLTAgE Lithium Ion 700mAH - 3.7V Battery ±5 Years Battery life

COLOurS Red, Amber, Blue, Green, White & Yellow

LIgHT SOurCE 16 High Bright Long Life LED’s

APP. rANgE 800m

FLASH PATTErNS Rotate 9 hrs , Quad flash 9 hrs, Single blink 60 hrs, Alternating blink 9 hrs, SOS Rescue 14 hrs, Steady on 5 hrs, 2 LED Flash 9 hrs, 4 LED Flash 6hrs, Steady on low 35hrs

CHArgEr Unit can be charged with a 12V car charger or a 220V wall charger (supplied with unit). Unit will be fully charged within 3 hours

IP rATINg IP67, Unit can be submerged down to 2m and can float on water. Durable construction.

WEIgHT 285g


VOLTAgE VOLTAgE

rECHArgEABLE BATTEry

12 VdC / 220 VAC

this 16 Led flare has 9 flash patterns. it is shock resistant, waterproof and durable. the magnet allows the unit to be attached to metal surfaces. the emergency flare can be recharged using a 12V car charger or a 220V wall charger (supplied with unit).



73

EMEr

gEN

Cy

FLA

rE

- SI

rEN

CO

EM

Erg

ENC

y F

LAr

E 6

PAC

k

EMERGENCY FLARE

sIrenCo emergenCy FLAre 6 PACk

SPECIFICATIONSVOLTAgE Lithium Ion 700mAH - 3.7V Battery 5+ Years Battery life

COLOurS Red, Amber, Blue, Green, White & Yellow

LIgHT SOurCE 16 High Bright Long Life LED’s

APP, rANgE 800m

FLASH PATTErNS Rotate 9 hrs , Quad flash 9 hrs, Single blink 60 hrs, Alternating blink 9 hrs, SOS Rescue14 hrs, Steady on 5 hrs, 2 LED Flash 9 hrs, 4 LED Flash 6hrs, Steady on low 35hrs

CHArgEr Unit can be charged with a 12V car charger or a 220V wall charger (supplied with unit)Unit will be fully charged within 3 hours

IP rATINg IP67, Unit can be submerged down to 2m and can float on water. Durable construction.

WEIgHT 3.1kg (285g each)


VOLTAgE VOLTAgE


12 VdC / 220 VAC

this 6 pack carry-case configuration allows for 6 emergency flares to be charged simultaneously. this 16 Led flare has 9 flash patterns. it is shock resistant,waterproof and durable the magnet allows the flare to be attached to metal surface. the emergency flare can be recharged using a 12V car charger or a 220V wall charger (supplied with unit).



74

IS P

Or

TAB

LE B

EAC

ON

- S

IrEN

CO

EM

Erg

ENC

y F

LAr

E

IS PORTABLE BEACON

sIrenCo Is PortAbLe beACon

PLeAse note: the ChArger Is not sUItAbLe For Use In Is LoCAtIons.

SPECIFICATIONSTyPE Sirenco IS Portable Beacon

CLASSIFICATION 60cm EXi9 l 150˚C Ma

CErTIFICATION SAEx M/11-370X, certified for surface and underground application

TyPE IS II

EX rATINg Exia 1 150˚C Ma

WEIgHT 285g


VOLTAgE VOLTAgE


12 VdC / 220 VAC

the is Portable beacon is used for intrinsically safe applications and is designed for hazardous environments such as petrol chemical plants and coal mines. the uniqueness of this unit is its durability and versatility as it is a rechargeable mobile is unit. this unit has 16 high bright Led’s with up to 60 hours of flash time (depending on mode), and has 9 selectable flash modes. it is shock resistant and waterproof. the magnet allows the portable beacon to be attached to metal surfaces. the emergency portable beacon is charged within 8 hours and can be recharged using a 12V car charger or a 220V wall charger (supplied with unit).



75

OTH

Er u

NIT

S -

SIr

ENC

O B

LAST

Er

OTHER UNITS

sIrenCo bLAster


SPECIFICATIONSPOWEr SuPPLy Gas power air canister

SOuNd OuTPuT 40ml Can: 115dB 100ml Can: 115dB 135ml Can: 127dB 300ml Can: 127dB

BLASTS PEr CANISTEr 40ml Can: 100ml Can: 135ml Can: 300ml Can: 20 short blasts 50 short blasts 60 short blasts 120 short blasts

TrANSPOrT INFOrMATION COMPRESSED GAS, NON FLAMMABLE, IATA/IMDG CLASS 2.2

WEIgHT 40ml Can: 80g 100ml Can: 160g 135ml Can: 244g 300ml Can: 444g

PACkINg dIMENSIONS 40ml Can: 100ml Can: 135ml Can: 300ml Can: 155x60x60mm 200x60x60mm 215x70x70mm 305x70x70mm

dIrECTIONS To attach the horn to the canister, place the horn on top of the canister and screw clockwise. Avoid cross threading. Do not over tighten. The canister must be held in an upright position with forefinger pressed firmly on the button.

CAuTION Contents under pressure. Do not tilt or invert canister during use. The safety device creates a loud noise. Do not emit sound next to ears. Keep out of reach of children. Do not puncture, incinerate or use near open flame. Contains non flammable Freon gas. Unit must be stored in temperatures not exceeding 49°C.

gAS CErTIFICATE MSDS Certificate available on request

SIzE SIzE40ML CANISTEr 100ML CANISTEr

SIzE SIzE135ML CANISTEr 300ML CANISTEr

the sirenco blaster is a multi purpose audible signaling device. it is ideal for personal

protection, sporting activities and as a back up alarm for industry, shopping centres and public places in the event of an emergency. the unit can also be placed inside the sirenco wall box as a complete stand alone emergency device.

replacement canisters are available.


76

OTH

Er u

NIT

S -

MEg

APH

ON

ES

OTHER UNITS

megAPhones

sChooL AnD FACtory tImer

OPTION 1 OPTION 2AM-20H HANdgrIP AM-21S SHOuLdEr SLuNg

SPECIFICATIONSPOWEr SOurCE 14 VdC 8 X UM-2 cells or car battery

VOICE rANgE 400m

POWEr OuTPuT 16W rated / 20W rated

BATTEry LIFE 8 - 10 hours

MIrCrOPHONE Directional

WEIgHT 2.2kg

PACkINg dIMENSIONS Horn dia. 220mm, Length 370mm

• dry cell & 12V car battery operation

• all abs body, sturdy yet lightweight

• built in siren & microphone

• clear sound, long range and effecient design

• conveniently located volume control & switch

• ideal for crowd control, fire fighting, rescue operations, construction sites, sport events, electioneering, field publicity and film shooting.


the school and factory timer is ideally suited to work in conjunction with a wide range of applications e.g. school period changes or factory tea/lunch breaks.

this versatile timer can also be used for general purpose time switch applications.

VOLTAgE230 VAC

SPECIFICATIONSdESCrIPTION Factory time switch box complete with time switch with 50 programs in an IP 56 housing

CONSuMPTION 16 Amp

WEIgHT 950g



77

SON

F1

rA

Ng

E -

E2S

SON

F1

SOu

Nd

Er


SPECIFICATIONSVOLTAgE 10-30 Vdc 24 Vac



SOuNd FrEquENCy 340 / 2 400Hz (Depends on tone selection)


CurrENT CONSuMPTION* 10-30V - 25mA 24V - 40mA

IP rATINg IP 55 - can be increased to IP 56 with WR kit

WEIgHT 260g


the e2s range of sounder units have been designed to perform at maximum capacity for as long as required. the sound output can be decreased by means of a volume control. standard colour is red, but these units are also available in grey. increased protection can be achieved by the use of a wr kit which needs to be ordered with the unit.


SON F1 RANGE

e2s son F1 soUnDer


78

A r

AN

gE

- SO

uN

dEr

& C

OM

BIN

ATI

ON

uN

ITS

- E2

S A

100

SOu

Nd

Er &

AL1

00 C

OM

BO

A RANGE - SOUNDER & COMBINATION UNITS

e2s A100 soUnDer & AL100 Combo

SPECIFICATIONSVOLTAgE 10-30 Vdc 24 Vac 110 Vac 220 Vac






CurrENT CONSuMPTION 10-30V - 25mA 24V - 40mA 110V - 13mA 220V - 13mA

CurrENT CONS. (COMBO) 12V - 525mA 24ac - 405mA 110V - 120mA 220 V - 65 mA

LENS COLOur Red, Amber, Green or Blue

IP rATINg IP 66 - Sounders IP 56 - Combo

WEIgHT Sounder - 370g Combo - 570g

PACkINg dIMENSIONS 110x110x90mm - Sounder 190x110x190mm - Combo


110 VAC 220 VAC

the e2s range of sounder and combination units have been designed to perform at maximum capacity for as long as required. the sound output can be decreased by means of a volume control. standard colour is red, but these units are also available in grey.



79

A r

AN

gE

- SO

uN

dEr

& C

OM

BIN

ATI

ON

uN

ITS

- E2

S A

105

SOu

Nd

Er &

AL1

05 C

OM

BO








CurrENT CONS. (COMBO) 12V - 525mA 24V - 275mA 110V - 120mA 220V - 65mA


IP rATINg IP 66 - Sounder IP 56 - Combo

WEIgHT 1kg - Sounder 1.2kg - Combo



110 VAC 220 VAC

the e2s range of sounder and combination units have been designed to perform at maximum capacity for as long as required. the sound output can be decreased by means of a volume control. standard colour is red, but these units are also available in grey and white.





80

A r

AN

gE

- SO

uN

dEr

& C

OM

BIN

ATI

ON

uN

ITS

- E2

S A

112

SOu

Nd

Er &

AL1

12 C

OM

BO




110 VAC 220 VAC




SOuNd FrEquENCy 340 / 2400Hz (Depends on tone selection)







WEIgHT 2.1kg - Sounder 2.3kg - Combo


the e2s range of sounder and combination units have been designed to perform at maximum capacity for as long as required. the sound output can be decreased by means of a volume control. standard colour is red, but these units are also available in grey and white.



81


A r

AN

gE

- SO

uN

dEr

& C

OM

BIN

ATI

ON

uN

ITS

- E2

S A

121

SOu

Nd

Er &

AL1

21 C

OM

BO



110 VAC 220 VAC







CurrENT CONSuMPTION 10-30V - 950mA 24V - 1 000mA 110V - 240mA 220V - 120mA

CurrENT CONS. (COMBO) 10-30V - 1 450mA 24V - 1 200mA 110V - 310mA 220V - 155mA





the e2s range of sounder and combination units have been designed to perform at maximum capacity for as long as required. the sound output can be decreased by means of a volume control. standard colour is red, but these units are also available in grey.



82

A r

AN

gE

- SO

uN

dEr

& C

OM

BIN

ATI

ON

uN

ITS

- E2

S A

141

SOu

Nd

Er


e2s A141 soUnDer






APP. rANgE 3 000m in still air

CurrENT CONSuMPTION 24V - 13.2A 110V - 4.2A 220V - 1.95A

IP rATINg IP 65

WEIgHT 14kg


220 VAC -

the e2s a141 is an unique very powerful disaster warning sounder. the tsunami is a compact, high powered unit with a nominal output of 141db(a) at 1 metre. ideally suited for battery backup applications where disaster situations could arise.



83

EXPL

OSI

ON

Pr

OO

F d

EVIC

E -

E2S

EX 0

5 B

EAC

ON

EXPLOSION PROOF DEVICE

e2s eX 05 beACon


duTy CyCLE Continuous Rated

COLOurS Amber, Red, Yellow, Clear, Blue or Green


LIgHT OuTPuT 5 Joule @ 1Hz

CLASSIFICATION Exd IIA, IIB & IIC T5

CErTIFICATION ATEX / CENELEC / FTZU / IECEx / GOST R

gAS grOuPS IIC


IP rATINg IP 67

WEIgHT 2.75kg



110 VAC 220 VAC

the e2s range of ex beacons are best suited for hazardous robust applications. suitable for zone 1, 2, 21 & 22 and gas groups iic. six lens colours available: red, Yellow, amber, blue, clear and green. automatic synchronisation on multibeacon systems. the units are chromated and powder coated with good resistance to humidity and salt spray environments. this is a flame proof unit and should be installed by suitably qualified persons.



84

EXPL

OSI

ON

Pr

OO

F d

EVIC

E -

E2S

EX 1

0 B

EAC

ON


e2s eX 10 beACon



CurrENT CONSuMPTION 12V - 1 450mA 24V - 660mA 110V - 250mA 220V - 110mA






gAS grOuPS IIC


IP rATINg IP 67

WEIgHT 2.75kg



110 VAC 220 VAC




85









gAS grOuPS IIC


IP rATINg IP 67

WEIgHT 2.75kg



e2s eX 15 beACon


110 VAC 220 VAC

EXPL

OSI

ON

Pr

OO

F d

EVIC

E -

- E

2S E

X 1

5 B

EAC

ON




86

EXPL

OSI

ON

Pr

OO

F d

EVIC

E -

E2S

EX 1

105

CO

MB

O


e2s eX 1105 Combo






SOuNd SELECT 32 user selectable tones






gAS grOuP IIB


IP rATINg IP 67

WEIgHT 2.75kg



110 VAC 220 VAC

the e2s range of ex combos are best suited for hazardous robust applications. suitable for zone 1, 2, 21 & 22 and gas group iib. six lens colours available: red, Yellow, amber, blue, clear and green. automatic synchronisation on multi beacon systems. the units are chromated and powder coated with good resistance to humidity and salt spray environments. this is a flame proof unit and should be installed by suitably qualified persons.



87


e2s eX 11 soUnDer

EXPL

OSI

ON

Pr

OO

F d

EVIC

E -

E2S

EX 1

1 SO

uN

dEr





SOuNd FrEquENCy 420 / 2 900Hz (depends on tone sellection)

SOuNd SELECT 32 users selectable tones with a 3 stage option

APP. rANgE 800m


CErTIFICATION ATEX / CENELEC / FTZ4 / IECEX / G0ST R

gAS grOuPS IIC


IP rATINg IP 67

WEIgHT 3.4kg



110 VAC 220 VAC

the e2s ex sounders can be used at petro chemical plants, fiery mines and where ex is required. the unit is chromated and powder coated with excellent resistance to humidity and salt spray environments. this is a flame proof unit and should be installed by suitably qualified person.



88

EXPL

OSI

ON

Pr

OO

F d

EVIC

E -

E2S

EX 1

2 SO

uN

dEr


e2s eX 12 soUnDer

SPECIFICATIONSVOLTAgE 12Vdc 24 Vdc 110 Vac 220 Vac






APP. rANgE 1 000m

IP rATINg IP 67


CErTIFICATION ATEX / CENELEC / FTZ4 / IECEX / G0ST R

gAS grOuP IIA, IIB & IIC


WEIgHT 3.4kg



110 VAC 220 VAC

the e2s ex sounders can be used at petro chemical plants, fiery mines and where ex is required. the unit is chromated and powder coated with excellent resistance to humidity and salt spray environments. this is a flame proof unit and should be installed by suitably qualified person.



89


EXPL

OSI

ON

Pr

OO

F d

EVIC

E -

E2S

EX B

rEA

k g

LASS

CA

LL P

OIN

T

e2s eX breAk gLAss CALL PoInt

SPECIFICATIONSVOLTAgE 24 VDC


HOuSINg MATErIAL Marine grade copper free LM6 Aluminium

COLOur Red

CLASSIFICATION II 2G Ex e d mb IIC T4 Gb

CErTIFICATION Atex: Sira 09ATEX3286X

gAS grOuPS Zones: 1, 2, 21, 22

IgNITION grOuP T4-135°C

IP rATINg IP 66

WEIgHT 800g


VOLTAgE24 VdC

the e2s ex break glass manual call points are approved for zones: 1, 2, 21 & 22. For the control of hazardous areas, fire and gas alarm systems. available with and without monitoring & resistors. all versions are certified to atex standards.



90

EXPL

OSI

ON

Pr

OO

F d

EVIC

E -

E2S

EX P

uSH

Bu

TTO

N C

ALL

PO

INT


e2s eX PUsh bUtton CALL PoInt




COLOur Red





IP rATINg IP 66

WEIgHT 800g


VOLTAgE24 VdC


the e2s ex Push button manual call points are approved for zones: 1, 2, 21 & 22. For the control of hazardous areas, fire and gas alarm systems. available with and without monitoring & resistors. all versions are certified to atex standards.



91


EXPL

OSI

ON

Pr

OO

F d

EVIC

E -

E2S

EX T

OO

L r

ESET

CA

LL P

OIN

T

e2s eX tooL reset CALL PoInt




COLOur Red





IP rATINg IP 66

WEIgHT 800g


VOLTAgE24 VdC

the e2s ex tool reset manual call points are approved for zones: 1, 2, 21 & 22. For the control of hazardous areas, fire and gas alarm systems. available with and without monitoring & resistors. all versions are certified to atex standards.



92

IS r

AN

gE

- E2

S IS

MIN

IALA

rM

SO

uN

dEr

IS RANGE

e2s Is mInIALArm soUnDer

SPECIFICATIONSVOLTAgE 16-28 Vdc (via Zener barrier)


CurrENT CONSuMPTION 25mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier



SOuNd SELECT 49 user selectable tones with a 3 stage alarm

APP. rANgE 300m

CLASSIFICATION Ex II 1G EEx ia IIC T4

CErTIFICATION 05 ATEX 2084X

gAS grOuPS Zone 0, 1 & 2, Gas Group IIC


IP rATINg IP 65

WEIgHT 453g


VOLTAgE VOLTAgE16 - 28 VdC VIA zENEr BArrIEr

the e2s is sounder is a specialised intrinsically safe product and installation must be completed by a certified person.



93

IS RANGE

e2s Is mInIALert Combo

IS r

AN

gE

- E2

S IS

MIN

IALE

rT

CO

MB

OSPECIFICATIONS

VOLTAgE 16-28 Vdc (via Zener barrier)


CurrENT CONSuMPTION 48mA (Typical when powered from 24V via a 28V - 300Ohm Zener Barrier)

LIgHT SOurCES 6 high intensity LEDs

LENS COLOur Red, Amber, Green, Blue and Clear



SOuNd SELECT 49 user selectable tones with a 3 stage alarm

APP. rANgE 300m





IP rATINg IP 65

WEIgHT 750g



the e2s is range is used only for intrinsically safe applications. this is combination unit is ideal for areas where an audible and visual alarm is required. installation must be completed by a certified person.



94

IS r

AN

gE

- E2

S IS

MIN

IALI

TE B

EAC

ON

IS RANGE

e2s Is mInIALIte beACon




COLOur Red, Amber, Blue & Green

LIgHT SOurCE 6 High Intensity LEDs





IP rATINg IP 65

WEIgHT T4 - 135°C



the e2s intrinsically safe beacon has an array of 6 high intensity Leds. Prismatic lens optimises Led effectiveness. two flash modes (2Hz and 1Hz) are featured with very low current consumption.



95

IS RANGE

e2s Is A105 soUnDer

IS r

AN

gE

- E2

S IS

A10

5 SO

uN

dEr







APP. rANgE 500m





IP rATINg IP 66

WEIgHT 750g - Sounder 1.2kg - Combo



the e2s is sounder range is used only for intrinsically safe applications. all the features of the a105 sounder but the added advantages of is. an is combination unit is also available and is ideal for areas where an audible/visual alarm is required.



96

IS r

AN

gE

- E2

S IS

L10

1 B

EAC

ON

IS RANGE

e2s Is L101 beACon





LIgHT SOurCE 6 LEDs


CErTIFICATION SIRA 04 ATEX 2302X / IECEx SIR 04.0039X



IP rATINg IP 66

WEIgHT 645g



the e2s intrinsically safe beacon has an array of 6 high intensity Leds. Prismatic lens optimises Led effectiveness. two flash modes (2Hz and 1Hz) are featured with very low current consumption.



97

IS RANGE




COLOur Red

CLASSIFICATION II 1G Ex ia IIC T4 Ga


gAS grOuPS Zones: 0, 1, 2, 21, 22


IP rATINg IP 66

WEIgHT 800g


e2s Is breAk gLAss CALL PoInt

VOLTAgE24 VdC

IS r

AN

gE

- E2

S IS

Br

EAk

gLA

SS C

ALL

PO

INT


the e2s is break glass manual call points are approved for zones: 0, 1, 2, 21 & 22 requiring intrinsically sale equipment for the control of fire and gas alarm systems. available with and without monitoring & resistors. all versions are certified to atex standards.



98

e2s Is PUsh bUtton CALL PoInt




COLOur Red





IP rATINg IP 66

WEIgHT 800g


VOLTAgE24 VdC

IS r

AN

gE

- E2

S IS

Pu

SH B

uTT

ON

CA

LL P

OIN

T

the e2s is Push button manual call points are approved for zones: 0, 1, 2, 21 & 22 requiring intrinsically sale equipment for the control of fire and gas alarm systems. available with and without monitoring & resistors. all versions are certified to atex standards.


IS RANGE


99




COLOur Red





IP rATINg IP 66

WEIgHT 800g


e2s Is tooL reset CALL PoInt

VOLTAgE24 VdC

IS r

AN

gE

- E2

S IS

TO

OL

rES

ET C

ALL

PO

INT


the e2s is tool reset manual call points are approved for zones: 0, 1, 2, 21 & 22 requiring intrinsically sale equipment for the control of fire and gas alarm systems. available with and without monitoring & resistors. all versions are certified to atex standards.


IS RANGE


100


COLOur LEd Red, Amber, Yellow, Clear, Blue & Green


LIgHT SOurCE 8 Hi-bright LED array @ 2Hz

CurrENT CONSuMPTION 12V -150mA 24V - 100mA 110V - 54mA 220V - 27mA

IP rATINg IP 66

WEIgHT 200g



110 VAC 220 VAC


the e2s Led beacon can be used for any application where a visual warning indicator is required. eight high intensity Leds with six lens colours are available.


e2s LeD beACons

BEA

CO

NS

2 -

E2S

LEd

BEA

CO

NS

BEACONS 2


101

BEA

CO

NS

2 -

E2S

XEN

ON

BEA

CO

NS

e2s Xenon beAConsBEACONS 2

SPECIFICATIONSVOLTAgE 12 Vdc 24 Vac 110Vac 220 Vac

COLOur LEd Red, Amber, Yellow, Clear, Opal, Blue & Green


LIgHT SOurCE 5 Joule Xenon @ 1Hz


IP rATINg IP 66

WEIgHT 200g



110 VAC 220 VAC

the e2s xenon beacon can be used for any application where a visual warning indicator is required. seven lens colours are available.



102

MARINE RANGE

e2s mA112 mArIne soUnDer

MA

rIN

E r

AN

gE

- E2

S M

A11

2 M

Ar

INE

SOu

Nd

Er


110 VAC 220 VAC








IP rATINg IP 67

WEIgHT 3kg


the e2s marine range is best suited for all marine and salt spray conditions. these high output sounders offer iP 67 protection. ideal for harsh environments with high ambient noise levels.


181 273


103

MARINE RANGE

e2s mA121 mArIne soUnDer

MA

rIN

E r

AN

gE

- E

2S M

A12

1 M

Ar

INE

SOu

Nd

Er


110 VAC 220 VAC



CurrENT CONSuMPTION 10-30V - 950mA 24V - 1 000mA 110V - 240mA 220V - 120mA





IP rATINg IP 67

WEIgHT 3kg


the e2s marine range is best suited for all marine and salt spray conditions. these high output sounders offer iP 67 protection. ideal for harsh environments with high ambient noise levels.



104

MARINE RANGE

e2s mArIne 5 beACon

MA

rIN

E r

AN

gE

- E2

S M

Ar

INE

5 B

EAC

ON


110 VAC 220 VAC




LIgHT SOurCE Xenon Tube - 5 Joule @ 1Hz


IP rATINg IP 67

WEIgHT 1.48kg


the e2s marine range is best suited for all marine and salt spray conditions. these high visibility beacons offer iP 67 protection. ideal for harsh environments.



105

MARINE RANGE

e2s mArIne 10 beACon

MA

rIN

E r

AN

gE

- E2

S M

Ar

INE

10 B

EAC

ON


110 VAC 220 VAC



LENS COLOur Red, Amber, Blue & Green

LIgTH SOurCE Xenon Tube - 10 Joule @ 1Hz


IP rATINg IP 67

WEIgHT 1.48kg


the e2s marine range is best suited for all marine and salt spray conditions. these high visibility beacons offer iP 67 protection. ideal for harsh environments.



106

MARINE RANGE

e2s mCA112-05 mArIne Combo

MA

rIN

E r

AN

gE

- E2

S M

CA

112-

05 M

Ar

INE

CO

MB

O

VOLTAgE VOLTAgE24 VdC -

110 VAC 220 VAC



CurrENT CONSuMPTION 24V - 150mA 110V - 250mA 220V - 115mA

COLOur Red, Blue, Green & Amber






IP rATINg IP 67

WEIgHT 3.5kg


the e2s marine range is best suited for all marine and salt spray conditions. this high output sounder and beacon combination unit offers iP67 protection. ideal for harsh environments with high ambient noise levels.



107

SON 4

e2s son 4 LeD Combo

SON

4 -

E2S

SO

N 4

LEd

CO

MB

O


110 VAC 220 VAC

SPECIFICATIONSVOLTAgE 12 Vdc 24 Vdc 24 Vac 110 Vac 220 Vac


CurrENT CONSuMPTION 12V - 50mA 24Vdc - 50mA 48V - 40mA 24Vac - 60mA 110V - 25mA 220V - 20mA





LIgHT SOurCE 5 High Intensity LEDs @ 2Hz

LENS COLOurS Red, Blue, Green & Amber

IP rATINg IP 66

WEIgHT 400g


the e2s son 4 and Led combos are continuously rated compact combination sounder and beacon units for fire and security applications where an audible and visual effect is required.



108

SON 4

e2s son 4 Xenon

SON

4 -

E2S

SO

N 4

XEN

ON


110 VAC 220 VAC



CurrENT CONSuMPTION 24V - 34-80mA 24V - 40-90mA 110V - 35mA 220V - 20mA


SOuNd FrEquENCy 340 / 2900Hz (depends on tone selection)




LENS COLOurS Red, Amber, Blue & Green

IP rATINg IP 66

WEIgHT 400g


the e2s son 4 and xenon combos are continuously rated compact combination sounder and beacons units for fire and security applications where an audible and visual effct is required.



109

APPELLO

e2s A105 & AL105 APPeLLo sPeeCh & tone

APP

ELLO

- E

2S A

105

& A

L105

APP

ELLO

SPE

ECH

& T

ON

E

VOLTAgE VOLTAgE9-15 VdC 18-30 VdC

110 VAC 220 VAC

SPECIFICATIONSVOLTAgE 9-15 Vdc 18-30 Vdc 110 Vac 220 Vac






CurrENT CONSuMPTION 9-15V - 150mA 18-30V - 180mA 110V - 40mA 220V - 20mA

CurrENT CONS (COMBO) 12V - 250mA 24V - 200mA 110V - 80mA 220V - 40mA


WEIgHT 1kg - Sounder 1.4kg - Combo


the appello range of voice annunciation sounders utilise analogue storage direct to silicon to offer up to 16 seconds or 2x8 seconds of user recordable speech. For applications requiring multiple sounders a synchronised voice annunciation sounder is also available.



110

APPELLO

e2s A112 & AL112 APPeLLo sPeeCh & tone

APP

ELLO

- E

2S A

112

& A

L112

APP

ELLO

SPE

ECH

& T

ON

E

VOLTAgE VOLTAgE9-15 VdC 18-30 VdC

110 VAC 220 VAC

SPECIFICATIONSVOLTAgE 9-15 Vdc 18-30 Vdc 110 Vac 220 Vac






CurrENT CONSuMPTION 9-15V - 150mA 18-30V - 180mA 110V - 40mA 220V - 20mA

CurrENT CONS (COMBO) 12V - 250mA 24V - 200mA 110V - 80mA 220V - 40mA




the appello range of voice annunciation sounders utilise analogue storage direct to silicon to offer up to 16 seconds or 2x8 seconds of user recordable speech. For applications requiring multiple sounders a synchronised voice annunciation sounder is also available.



111

gPH

HO

rN

S -

E2S

gPH

1 S

ur

FAC

E M

Ou

NT

ALA

rM

HO

rN

GPH HORNS

e2s gPh 1 sUrFACe moUnt ALArm horn


220 VAC -

SPECIFICATIONSVOLTAgE 10-30 Vdc 110 Vac 220 Vac



SOuNd FrEquENCy 60Hz (depends on tone selection)

SOuNd SELECT 3 user selectable tones including a “Buzzer” tone



IP rATINg IP 66

WEIgHT 350g


the e2s gPH Horn range is best suited for all applications where a low frequency sound is required or a sound distinctly different from a siren or electronic sounder.



112

GPH HORNS

e2s gPh 2 FLUsh moUnt ALArm horn

gPH

HO

rN

S -

E2S

gPH

2 F

LuSH

MO

uN

T A

LAr

M H

Or

N


220 VAC -




SOuNd FrEquENCy 60Hz (depends on tone selection)

SOuNd SELECT 3 user selectable tones including “Buzzer” tone


CurrENT CONSuMPTION 10-30V - 62mA 110V - 40mA 220V - 50mA

IP rATINg IP 54

WEIgHT 350g


the e2s gPH Horn range is best suited for all applications where a low frequency sound is required or a sound distinctly different from a siren or electronic sounder.



113

HOOTRONIC RANGE

e2s hmA121 hootronIC soUnDer

HO

OTr

ON

IC r

AN

gE

- E2

S H

MA

121

HO

OTr

ON

IC S

Ou

Nd

Er


220 VAC -





SOuNd SELECT 5 traditional sounds and 3 stages



IP rATINg IP 66

WEIgHT 3kg


the e2s Hootronic series of products reproduce the sounds made by traditional electromechanical signalling devices but in a modern, reliable and cost effective way. the range is continuously rated, and requires zero maintenance and signal quality and performance will not degrade with age. this unit produces the sounds of a siren, bell, hooter and church bell.



114

HOOTRONIC RANGE

e2s hmCA112 hootronIC soUnDer & beACon Combo

HO

OTr

ON

IC r

AN

gE

- E2

S H

MC

A11

2 H

OO

TrO

NIC

SO

uN

dEr

AN

d B

EAC

ON

CO

MB

O


220 VAC -







LIgHT SOurCE 5 Joule @ 1Hz

LENS COLOurS Red, Amber, Yellow, Green, Clear & Blue


IP rATINg IP 66

WEIgHT 3.5kg


the e2s Hootronic series of products reproduce the sounds made by traditional electromechanical signalling devices but in a modern, reliable and cost effective way. the range is continuously rated, requires zero maintenance and signal quality and performance will not degrade with age. this unit produces the sounds of a siren, bell, hooter and church bell.



115

HOOTRONIC RANGE

e2s hA121 hootronIC soUnDer

HO

OTr

ON

IC r

AN

gE

- E2

S H

A12

1 H

OO

TrO

NIC

SO

uN

dEr


220 VAC -

SPECIFICATIONSVOLTAgE 24 Vdc 110Vac 220 Vac







IP rATINg IP 66

WEIgHT 2.7kg





116

HOOTRONIC RANGE

e2s hAL121 hootronIC soUnDer AnD beACon Combo

HO

OTr

ON

IC r

AN

gE

- E2

S H

AL1

21 H

OO

TrO

NIC

SO

uN

dEr

AN

d B

EAC

ON

CO

MB

O


220 VAC -







LIgHT SOurCE 5 Joule @ 1Hz

LENS COLOurS Red, Amber, Yellow, Opal, Green, Clear & Blue


IP rATINg IP 56

WEIgHT 2.9kg





117

sPeCtrA b100sLF stAtUs FILAment beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

100S

LF S

TATu

S FI

LAM

ENT

BEA

CO

N


110 VAC 220 VAC


LENS COLOur Red, Yellow, Amber, Clear, Blue & Green

HOuSINg & LENS Polycarbonate (UL 94 V0 f1)

LIgHT SOurCE Filament Lamp BA 9 (Permanent status beacon)

LIgHT OuTPuT 5W

CurrENT CONSuMPTION 12V - 417mA 24V - 208mA 48V - 104mA 110V - 43mA 220V - 22mA

IP rATINg IP 65

WEIgHT 90g


the b100 series comprises a xenon strobe beacon, permanent flament bulb, blinking filament lamp beacon and a permanent Led array beacon. Pluggable terminals ensure quick installation.


SPECTRA BEACONS


118

SPECTRA BEACONS

sPeCtrA b100FLF FLAshIng FILAment beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

100F

LF F

LASH

INg

FIL

AM

ENT

BEA

CO

N




LIgHT SOurCE Filament Lamp BA 9 (Flashing Lamp beacon)

LIgHT OuTPuT 5W @ 1Hz

CurrENT CONSuMPTION 12V - 500mA 24V - 250mA 48V - 120mA 110V - 35m A220V - 25mA

IP rATINg IP 65

WEIgHT 93g



110 VAC 220 VAC




119

SPECTRA BEACONS

sPeCtrA b100str Xenon beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

100S

Tr X

ENO

N B

EAC

ON

VOLTAgE VOLTAgE10 - 30 VdC 110 VAC

220 VAC -




LIgHT SOurCE Xenon Strobe (Flashing beacon)

LIgHT OuTPuT 1 Joule @ 0.75Hz


IP rATINg IP 65

WEIgHT 105g





120

SPECTRA BEACONS

sPeCtrA b100LDA LeD beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

100L

dA

LEd

BEA

CO

N

SPECIFICATIONSVOLTAgE 10-30 Vdc 90-230 Vac

LENS COLOur Red, Yellow, Amber, Blue & Green


LIgHT SOurCE LED (Permanent status beacon)

LIgHT OuTPuT 9 High power LED’s

CurrENT CONSuMPTION 10-30V - 80mA 90-230V - 32mA

IP rATINg IP 65

WEIgHT 93g


VOLTAgE VOLTAgE10-30 VdC 90-230 VAC




121

SPECTRA BEACONS

sPeCtrA b200sLF stAtUs FILAment beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

200S

LF S

TATu

S FI

LAM

ENT

BEA

CO

N


110 VAC 220 VAC

SPECIFICATIONSVOLTAgE 12 Vdc 24 Vdc 48 Vdc 110 Vac 220 Vac



LIgHT SOurCE Filament Lamp BA 9 (Permanent Status Beacon)

LIgHT OuTPuT 5W


IP rATINg IP 65

WEIgHT 77g


the b200 series comprises a xenon strobe beacon, permanent filament bulb, blinking filament lamp beacon and a permanent Led array beacon. the surface mount base is supplied with a neoprene mounting gasket and can also be supplied with a right angle bracket or with a tube mounting assembly.



122

SPECTRA BEACONS

sPeCtrA b200FLF FLAshIng FILAment beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

200F

LF F

LASH

INg

FIL

AM

ENT

BEA

CO

N


110 VAC 220 VAC




LIgHT SOurCE Filament Lamp BA 9 (Flashing Lamp Beacon)

LIgHT OuTPuT 5W @ 1Hz


IP rATINg IP 65

WEIgHT 79g





123

SPECTRA BEACONS

sPeCtrA b200str Xenon beACons

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

200S

Tr X

ENO

N B

EAC

ON

S


220 VAC -

SPECIFICATIONSVOLTAgE 10 - 30 Vdc 110 Vac 220 Vac



LIgHT SOurCE Xenon Strobe (Flashing Beacon)

LIgHT OuTPuT 1 Joule @ 0.75Hz


IP rATINg IP 65

WEIgHT 84g





124

SPECTRA BEACONS

sPeCtrA b200LDA LeD beACons

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

200L

dA

LEd

BEA

CO

NS





LIgHT SOurCE LED (Permanent Status Beacon)

LIgHT OuTPuT 9 High power LED’s


IP rATINg IP 65

WEIgHT 78g





125

SPECTRA BEACONS

sPeCtrA b300sLF stAtUs beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

300S

LF S

TATu

S B

EAC

ON


110 VAC 220 VAC




LIgHT SOurCE Filament Lamp E14 (Permanent Status Beacon)

LIgHT OuTPuT 25W

CurrENT CONSuMPTION 12V - 2.1A 24V - 1.1A 48V - 520mA 110V - 217mA 220V - 109mA

IP rATINg IP 65

WEIgHT 262g


Combination with an A105, A112 and A121 sounder is available.

the b300 series comprises a xenon strobe beacon, permanent filament bulb or halogen beacon, blinking filament lamp or rotating beacon and a multi-function Led array beacon. the surface mount base can also be mounted with a right angle bracket or with a tube mounted assembly.



126

SPECTRA BEACONS

sPeCtrA b300FLF bLInkIng beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

300F

LF B

LIN

kIN

g B

EAC

ON


110 VAC 220 VAC




LIgHT SOurCE Filament Lamp E14 (Blinking beacon) - 3 frequencies selectable during installation

LIgHT OuTPuT 25W @ 0.5Hz / 1Hz / 2Hz

CurrENT CONSuMPTION 12V - 1.75A 24V - 1.1A 48V - 0.8mA 110V - 255mA 220V - 130mA

IP rATINg IP 65

WEIgHT 283g






127

SPECTRA BEACONS


SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

300S

Tr X

ENO

N B

EAC

ON


110 VAC 220 VAC




LIgHT SOurCE Xenon Strobe (Flashing Beacon)



IP rATINg IP 65

WEIgHT 325g






128

SPECTRA BEACONS

sPeCtrA b300sLh stAtUs hALogen beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

300S

LH S

TATu

S H

ALO

gEN

BEA

CO

N


110 VAC 220 VAC




LIgHT SOurCE Halogen Lamp (Permanent Status Beacon)

LIgHT OuTPuT 20W - dc units / 25W - ac units

CurrENT CONSuMPTION 12V - 1.7A 24V - 833mA 110V - 217mA 220V - 109mA

IP rATINg IP 65

WEIgHT 262g






129

SPECTRA BEACONS

sPeCtrA b300FLh bLInkIng hALogen beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

300F

LH B

LIN

kIN

g H

ALO

gEN

BEA

CO

N


110 VAC 220 VAC




LIgHT SOurCE Halogen Lamp (Blinking Beacon) - 3 frequencies selectable during installation

LIgHT OuTPuT 20W - dc units / 25W - ac units @ 0.5Hz / 1Hz / 2Hz

CurrENT CONSuMPTION 12V - 1.7A 24V - 1A 110V - 208mA 220V - 116mA

IP rATINg IP 65

WEIgHT 279g






130

SPECTRA BEACONS

sPeCtrA b300sts synChronIseD beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

300S

TS S

yN

CH

rO

NIS

Ed B

EAC

ON


110 VAC 220 VAC




LIgHT SOurCE Xenon Strobe (Synchronised Flashing Beacon)



IP rATINg IP 65

WEIgHT 325g






131

SPECTRA BEACONS

sPeCtrA b300stF DUAL FreQUenCy Xenon beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

300S

TF d

uA

L Fr

Equ

ENC

y X

ENO

N B

EAC

ON


48 VdC -

SPECIFICATIONSVOLTAgE 12 Vdc 24 Vdc 48 Vdc


HOuSINg & LENS Polycarbonate (UL 94 VO f1)

LIgHT SOurCE Xenon Strobe Dual-frequency Flashing Beacon

LIgHT OuTPuT 5 Joule @ 1Hz / 2Hz


IP rATINg IP 65

WEIgHT 325g






132

SPECTRA BEACONS

sPeCtrA b300rth rotAtIng hALogen beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

300r

TH r

OTA

TIN

g H

ALO

gEN

BEA

CO

N


110 VAC 220 VAC




LIgHT SOurCE Halogen Bulb (Rotating Beacon) @ 180 RPM


CurrENT CONSuMPTION 12V - 1.72A 24V - 0.91A 110V - 216mA 220V - 117mA

IP rATINg IP 65

WEIgHT 370g






133

SPECTRA BEACONS

sPeCtrA b300LDA LeD mULtI-FUnCtIon ArrAy beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

300L

dA

LEd

Mu

LTI-

FuN

CTI

ON

Ar

rA

y B

EAC

ON


220 VAC -




LIgHT SOurCE LED (4 rotating, 4 flashing and 1 steady on configuration mode)

LIgHT OuTPuT 16 High output LED array


IP rATINg IP 65

WEIgHT 285g






134

SPECTRA BEACONS

sPeCtrA b400sLF stAtUs beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

400S

LF S

TATu

S B

EAC

ON


110 VAC 220 VAC




LIgHT SOurCE Filament Lamp E14 (Permanent Status Beacon)

LIgHT OuTPuT 40W


IP rATINg IP 65

WEIgHT 510g


Combination with an A112 and A121 sounder is available.




135

SPECTRA BEACONS

sPeCtrA b400FLF bLInkIng beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

400F

LF B

LIN

kIN

g B

EAC

ON


220 VAC -




LIgHT SOurCE Filament Lamp E14 (Blinking Beacon) - 3 frequencies selectable during installation

LIgHT OuTPuT 40W @ 0.5Hz / 1Hz / 2Hz

CurrENT CONSuMPTION 24V - 1.14A 110V - 340mA 220V - 118mA

IP rATINg IP 65

WEIgHT 535g






136

SPECTRA BEACONS


SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

400S

Tr X

ENO

N B

EAC

ON


220 VAC -




LIgHT SOurCE Xenon Strobe (flashing beacon) - 3 flash patterns selectable during installation

LIgHT OuTPuT 15 Joule @ 1Hz / 15 Joule + 10 Joule @ 0.75Hz / 15 Joule + 10 Joule + 10 Joule @ 0.5Hz


IP rATINg IP 65

WEIgHT 696g






137

SPECTRA BEACONS

sPeCtrA b400sLh stAtUs hALogen beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

400S

LH S

TATu

S H

ALO

gEN

BEA

CO

N


110 VAC 220 VAC




LIgHT SOurCE Halogen Lamp (Permanent Status Beacon)



IP rATINg IP 65

WEIgHT 510g






138

SPECTRA BEACONS

sPeCtrA b400FLh bLInkIng hALogen beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

400F

LH B

LIN

kIN

g H

ALO

gEN

BEA

CO

N


110 VAC 220 VAC




LIgHT SOurCE Halogen Lamp (Blinking Beacon) - 3 selectable frequencies during installation

LIgHT OuTPuT 35W - dc units @ 0.5Hz / 1Hz / 2Hz 40W - ac units @ 0.5Hz / 1Hz / 2Hz


IP rATINg IP 65

WEIgHT 535g






139

SPECTRA BEACONS

sPeCtrA b400sts synChronIseD Xenon beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

400S

TS S

yN

CH

rO

NIS

Ed X

ENO

N B

EAC

ON


220 VAC -




LIgHT SOurCE Xenon Strobe (Synchronised Flashing Beacon)



IP rATINg IP 65

WEIgHT 696g






140

SPECTRA BEACONS

sPeCtrA b400rth rotAtIng hALogen beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

400r

TH r

OTA

TIN

g H

ALO

gEN

BEA

CO

N


110 VAC 220 VAC

SPECIFICATIONSVOLTAgE 12Vdc 24 Vdc 110 Vac 220 Vac



LIgHT SOurCE Halogen Bulb (Rotating Beacon) @ 180 RPM


CurrENT CONSuMPTION 12V - 3A 24V - 1.54A 110V - 338mA 220V - 186mA

IP rATINg IP 65

WEIgHT 578g






141

SPECTRA BEACONS

sPeCtrA b400LDA LeD mULtI-FUnCtIon ArrAy beACon

SPEC

TrA

BEA

CO

NS

- SP

ECTr

A B

400L

dA

LEd

Mu

LTI-

FuN

CTI

ON

Ar

rA

y B

EAC

ON

VOLTAgE VOLTAgE10 - 50 VdC 110 VAC

220 VAC -




LIgHT SOurCE LED (4 rotating, 4 flashing and steady on configurations)

LIgHT OuTPuT 32 High output L.E.D array


IP rATINg IP 65

WEIgHT 845g






142

PANEL MOUNT INDICATORS

PAN

EL M

Ou

NT

INd

ICA

TOr

S -

E2S

22d

PA

NEL

MO

uN

T IN

dIC

ATO

rS

e2s 22D PAneL moUnt InDICAtors


220 VAC/dC -


duTy CyCLE 50 000hrs


FLASH rATE 2Hz

APP. rANgE 20m

CurrENT CONSuMPTION 24V - 20-80mA 48V - 20-80mA 110V - 18-25mA 220V - 18-25mA

LIgHT COLOurS Red, Amber, Green, Blue & White

IP rATINg IP 65

WEIgHT 90g


the e2s-22d range includes buzzers, combination units and pilot lights featuring super bright multichip Leds. ingress protection to iP 65, low current consumption and unsurpassed reliability under extreme conditions are all standard features of the e2s-22d range. the range utilises screw terminals with wire guards for ease of installation and the ability to daisy chain the lights into an array.



143


PAN

EL M

Ou

NT

INd

ICA

TOr

S -

E2S

28d

PA

NEL

MO

uN

T B

uzz

ErS

e2s 28D PAneL moUnt bUzzers

VOLTAgE VOLTAgE30 VdC 110 VAC/dC

220 VAC -




FLASH rATE 2 900Hz

APP. rANgE 20m


IP rATINg IP 65

WEIgHT 90g


the e2s-28d range consists of the highest quality Floyd bell continuous tone and dual tone panel mounted piezo buzzers. the built-in volume control provides variable attenuation up to 20db(a). the terminals are standard 6.35 mm quick- connect blades for push-on or direct solder attachment.



144


PAN

EL M

Ou

NT

INd

ICA

TOr

S -

SIr

ENC

O P

AN

EL M

Ou

NT

22M

M IN

dIC

ATO

rS

sIrenCo PAneL moUnt 22mm InDICAtors

VOLTAgE VOLTAgE VOLTAgE12 VAC/dC 24 VAC/dC 110 VAC

220 VAC 380 VAC -

SPECIFICATIONSVOLTAgE 12 Vac/dc 24 Vac/dc 110 Vac 220 Vac 380 Vac


CurrENT CONSuMPTION 12V - 20-80mA 24V - 20-80mA 110V - 18-25mA 220V - 18-25mA 380V - 18-25mA

LIgHT COLOurS Red, Amber, Green, Blue & White

IP rATINg IP 65

WEIgHT 90g


the range includes buzzers, combination units and pilot lights featuring super bright multichip Leds. ingress protection to iP 65, low current consumption and unsurpassed reliability under extreme conditions are all standard features of this range. the range utilises screw terminals with wire guards for ease of installation and the ability to daisy chain the light into an array.



145


PAN

EL M

Ou

NT

INd

ICA

TOr

S -

SIr

ENC

O P

AN

EL M

Ou

NT

22M

M B

uzz

Er

sIrenCo PAneL moUnt 22mm bUzzer


220 VAC 380 VAC -




FrEquENCy 2 900Hz

APP. rANgE 20m


IP rATINg IP 65

WEIgHT 90g


the range includes buzzers, combination units and pilot lights featuring super bright multichip Leds. ingress protection to iP 65, low current consumption and unsurpassed reliability under extreme conditions are all standard features of this range. the range utilises screw terminals with wire guards for ease of installation and the ability to daisy chain the buzzer into an array.



146

PAN

EL M

Ou

NT

INd

ICA

TOr

S -

SIr

ENC

O P

AN

EL M

Ou

NT

22M

M C

OM

BIN

ATI

ON

uN

IT

sIrenCo PAneL moUnt 22mm CombInAtIon UnIt


220 VAC 380 VAC -


duTy CyCLE 50 000 Hrs




LIgHT COLOurS Red, Amber, Blue, Green & White

IP rATINg IP 65

WEIgHT 90g


the range includes buzzers, combination units and pilot lights featuring super bright multichip Leds. ingress protection to iP 65, low current consumption and unsurpassed reliability under extreme conditions are all standard features of this range. the range utilises screw terminals with wire guards for ease of installation and the ability to daisy chain the combination unit into an array.




147

SPEC

TrA

Tr

AFF

IC L

IgH

TS -

SPE

CTr

A B

350T

LA L

Ed A

rr

Ay

Tr

AFF

FIC

LIg

HT

SPECTRA TRAFFIC LIGHTS

sPeCtrA b350tLA LeD ArrAy trAFFIC LIght



LENS COLOur Red, Amber & Green


LIgHT SOurCE High output LED

LIgHT OuTPuT 15 x High-bright LED array

CurrENT CONSuMPTION 10-30V - 140mA 90-230V - 10-40mA

IP rATINg IP 65

WEIgHT 230g


the b350 series of traffic light beacons is avaliable in single e27 filament lamp, dual e14 filament lamp or high output Led array version. the compact housing is ideal for space constrained applications or for mounting directly onto machinery etc.



148


SPEC

TrA

Tr

AFF

IC L

IgH

TS -

SPE

CTr

A B

350T

SB F

ILA

MEN

T LA

MP

TrA

FFIC

LIg

HT

sPeCtrA b350tsb FILAment LAmP trAFFIC LIght


LENS COLOur Red, Yellow, Blue, Clear, Amber & Green


LIgHT SOurCE Filament Lamp E14

LIgHT OuTPuT 15W

CurrENT CONSuMPTION 12V - 1.25A 24V - 625mA 48V - 313mA 110V - 130mA 220V - 65mA

IP rATINg IP 65

WEIgHT 210g



110 VAC 230 VAC

the b350 series of traffic light beacons is available in single e14 filament bulb or high output Led array version. the compact housing is ideal for space constrained applications or for mounting directly onto machinery etc.



149


LENS COLOur Red, Amber & Green


LIgHT SOurCE High output LED traffic light

LIgHT OuTPuT 24 x LED array

CurrENT CONSuMPTION 10-30V - 175mA 90-230V - 15-40mA

IP rATINg IP 65

WEIgHT 410g



sPeCtrA b450tLA LeD ArrAy

SPEC

TrA

Tr

AFF

IC L

IgH

TS -

SPE

CTr

A B

450T

LA L

Ed A

rr

Ay


the b450 series of traffic light beacons is avaliable in single e27 filament lamp, dual e14 filament lamp or high output Led array version. the compact housing is ideal for space constrained applications or for mounting directly onto machinery etc.



150


SPEC

TrA

Tr

AFF

IC L

IgH

TS -

SPE

CTr

A B

450T

SB F

ILA

MEN

T LA

MP

sPeCtrA b450tsb FILAment LAmP


LENS COLOur Red, Amber, Blue, Yellow, Clear & Green


LIgHT SOurCE Filament Lamp E27 traffic light

LIgHT OuTPuT 25W


IP rATINg IP 65

WEIgHT 380g



230 VAC -

the b450 series of traffic light beacons is available in single e27 filament lamp, dual e14 filament lamp or high output Led array version. the compact housing is ideal for space constrained applications or for mounting directly onto machinery etc.



151


sPeCtrA b450tDb DUAL FILAment LAmP

SPEC

TrA

Tr

AFF

IC L

IgH

TS -

SPE

CTr

A B

450T

dB

du

AL

FILA

MEN

T LA

MP


LENS COLOur Red, Amber, Blue, Yellow, Clear & Green


LIgHT SOurCE Dual Fialment Lamp E14 Traffic Light

LIgHT OuTPuT 2x15W

CurrENT CONSuMPTION 12V - 1.25A 24V - 625mA 48V - 312mA 110V - 130mA 220V - 65mA

IP rATINg IP 65

WEIgHT 395g



110 VAC 230 VAC

the b450 series of traffic light beacons is available in single e27 filament lamp, dual e14 filament lamp or high output Led array version. the compact housing is ideal for space constrained applications or for mounting directly onto machinery etc.



152

SPECTRA SOUNDERS & COMBINATION UNITS

SPEC

TrA

SO

uN

dEr

S &

CO

MB

INA

TIO

N u

NIT

S -

SPEC

TrA

B30

0SN

d &

B40

0SN

d S

Ou

Nd

Er

sPeCtrA b300snD & b400snD soUnDer

SPECIFICATIONSVOLTAgE 10-30 Vac/dc 40-260 Vac/dc



SOuNd FrEquENCy 1 200 / 500Hz (depends on tone selection)


APP. rANgE 800m in still ari on open field


IP rATINg IP 65

WEIgHT 500g


VOLTAgE VOLTAgE10-30 VAC/dC 40-260 VAC/dC

this is a high output signalling horn suitable for a variety of general signalling applications. this unit reproduces the alert sound of traditional electro-mechanical equivalents but without any of the reliability issues. this sounder can be configured with the b350 or b450 ttraffic light beacons for complete audiovisual signalling.



153


sPeCtrA h100b horn & h100bL LeD Combo

SPEC

TrA

SO

uN

dEr

S &

CO

MB

INA

TIO

N u

NIT

S -

SPEC

TrA

H10

0B H

Or

N &

H10

0BL

LEd

CO

MB

O

SPECIFICATIONSVOLTAgE 10-30 Vdc 40-260 Vac/dc








LENS COLOur Red, Amber, Green, Yellow or Blue


WEIgHT 118g - Sounder 184g - Combo


VOLTAgE VOLTAgE10-30 VAC/dC 40-260 VAC/dC

this compact horn reproduces the alert sound of the larger traditional electromechanical equivalent but without any of the reliability issues. the unit has a high output and the signal is suitable for a variety of installation types.



154


SPEC

TrA

SO

uN

dEr

S &

CO

MB

INA

TIO

N u

NIT

S -

SPEC

TrA

H10

0T T

ru

MPE

T H

Or

N &

H10

0TX

XEN

ON

CO

MB

O

sPeCtrA h100t trUmPet horn & h100tX Xenon Combo




SOuNd FrEquENCy 1 200 / 500Hz (Depends on tone selection)


APP. rANgE 300m in still ari on open field


CurrENT CONS. (COMBO) 24V - 145mA 110V - 49mA 220V - 30mA



WEIgHT 148g - Sounders 219g - Combo

PACkINg dIMENSIONS 180x100x100mm - Sounders 250x100x100mm - Combo


110 VAC 220 VAC

this trumpet horn reproduces the alert sound of the larger traditional electromechanical equivalent but without any of the reliability issues. the unit has a high output and the signal is suitable for a variety of installation types.



155

sPeCtrA h110t trUmPet horn & h110tX Xenon Combo

SPE

CTr

A S

Ou

Nd

ErS

& C

OM

BIN

ATI

ON

uN

ITS

- S

PEC

TrA

H11

0T T

ru

MPE

T H

Or

N &

H11

0TX

XEN

ON

CO

MB

O






APP. rANgE 500m depending on tone selection


CurrENT CONS. (COMBO) 12V - 2.24A 24V - 1A 110V - 49mA 220V - 135mA



WEIgHT 341g - Sounders 678g - Combo



110 VAC 220 VAC

this trumpet horn reproduces the alert sound of the larger traditional electromechanical equivalent but without any of the reliability issues. the unit has a high output and the signal is suitable for indoor and outdoor installations.




156

SPEC

TrA

SO

uN

dEr

S &

CO

MB

INA

TIO

N u

NIT

S -

SPEC

TrA

SIg

NA

L TO

WEr

STA

Ck

LIg

HTS

70M

M

SPECIFICATIONSVOLTAgE 24 Vac/dc 110 Vac 220 Vac


SOuNd OuTPuT 2 tone - 84 dB(A) at 1m 16 tone - 90 dB(A) at 1m

SOuNd FrEquENCy 2 600Hz (Depends on tone selection and sound module)

SOuNd SELECT 2 tones or 16 tones

APP. rANgE 200m depending on tone selection

CurrENT CONSuMPTION 24V - 50-210mA 110V - 25-43mA 220V - 15-85mA

CurrENT CONS. (COMBO) 24V - 84.5A 110V - 78mA 220V - 78mA

LENS COLOur Red, Amber, Green, Yellow, Clear or Blue

IP rATINg IP 64

WEIgHT Depends on total modules

PACkINg dIMENSIONS Depends on total modules

VOLTAgE VOLTAgE24 VAC/dC 110 VAC

220 VAC -

the signal tower range can accommodate up to seven modules. Filament, Led, xenon and sound modules are available.



sPeCtrA sIgnAL tower stACk LIghts 70mm


157

Tur

BO

BLO

WEr

- S

IrEN

CO

PET

rO

L EN

gIN

E PO

WEr

Ed T

ur

BO

BLO

WEr

TURBO BLOWER

sIrenCo PetroL engIne PowereD tUrbo bLower

SPECIFICATIONSENgINE Honda 5.5 Hp / 4.1 kW GX series with oil Alert Protection

FAN 16” 21” 24”

ruN TIME 58min

PPV AIrFLOW 17 099 m³/hr 29 355 m³/hr 30 039 m³/hr

WEIgHT 29kg 40kg 52kg

MOdELS Engine blower 16” Engine blower 21” Engine blower 24”

MOTOr 5.5Hp/4 1 kW Petrol 5.5Hp/4 4.1 kW Petrol Engine 5.5Hp/4 4.1 Petrol Honda Engine Honda Engine Honda Engine

rPM 2900r/min 1450r/min 1450r/min

FAN SIzE 400 mm 540 mm 600 mm7 blade 7 blade 9 blade

PACkINg dIMENSIONS(refer to diagram)

A : 543 (h) A : 651 (h) A : 747 (h)B : 518 (w) B : 626 (w) B : 721 (w)C : 442 (d) C : 506 (d) C : 541 (d)

High volume turbo blower used for warehouses, malls and large structures when situations call for a higher airflow. Precision-balanced cast aluminum blade runs at only 1800 rpm to significantly reduce stress and chance of failure. easy one step tilt adjustment for fast, easy set-up. retractable handle for push-pull operation. rugged 32mm powder coated steel frame. Pneumatic tyres for uneven terrain. optional bigbore exhaust diverter.

158

Tur

BO

BLO

WEr

- S

IrEN

CO

ELE

CTr

IC P

OW

ErEd

Tu

rB

O B

LOW

Er

TURBO BLOWER

sIrenCo eLeCtrIC PowereD tUrbo bLower

SPECIFICATIONSENgINE Motor 1.2kW 50/60Hz - 16”- 20” - 24”

FAN 16” 20” 24”

ruN TIME 58min

PPV AIrFLOW 10 360 m³/hr 16 150 m³/hr 18 360 m³/hr

WEIgHT 26kg 38kg 45kg

MOdELS Electric Blower 16” Electric Blower 20” Electric Blower 24”

MOTOr 1.2kW, 220, 380V 1.2kW, 220, 380V 1.5kW, 220, 380V

rPM 2 900r/min 1 450r/min 1 450r/min

FAN SIzE 400 mm 500 mm 600 mm 7 blade 9 blade 9 blade

PACkINg dIMENSIONS (refer to diagram)

A: 480 (h)) A: 650 (h) A: 730 (h) B: 460 (w) B: 630 (w) B: 710 (w) C: 320 (d) C: 430 (d) C: 490 (d)


For ventilation at factory buildings, construction sites, warehouses, mining & industry. smoke ejection - clears basements, confined areas with ducting. Housed in heat resistant lexan. stackable for more air force and easy storage. optional duct adapter for use with duct in confined space applications. optional door bar and hanger kit for suspending doorways or windows.

159

notes

Sirens • Bells • Hooters • Electronic Sounders

Voice Sounders • Combination Units • Beacons

Intrin

sically Safe Sou

nd

ers and

Beaco

ns • Sig

nal To

wers • A

irho

rns

Flam

epro

of

Dev

ices

•

Mar

ine

Dev

ices

•

Bea

con

s •

Traf

fi c

Lig

hts

www.kama.co.za