The customers are required to fill in the following items in detail.

1. Discharge: m3/hr (Max.: Min: )

2. Density of slurry: %Wt

3. True Specific gravity of solids:

4. Specific gravity of the liquid including solids:

5. Specific gravity of the liquid excluding solids:

6. Kind of solid:

7. Size distribution: (Max particle size: D50: )

8. Components of the liquid excluding solids:

9. Temperature of the liquid including solids: ˚C Max: ˚C

10. pH:

11. Viscosity:

12. Desirable material: Rubber Metal Seal type: Gland Expeller Mechanical

Conditions for delivery side

13. Actual pump head: m at the highest point m at the pipe end m

14. Pipe length: m

15. Pipe diameter:

16. Valves, bends, etc.

17. Pipe material:

18. Conditions at pipe ends:

19. Others:

Conditions for intake side

20. Actual pump head: m at max.: m at min.: m

21. Pipe length: m

22. Pipe diameter:

23. Valves, bends, etc.:

24. PNSHa:

25. Conditions at pipe ends:

26. Others

27. Total pump head: mLiq

28. Total suction head: mLiq

29. Operating condition: Continuous Intermittent Hr/day

30. Sealing water: Possible Impossible

31. Bubbles mingled: Observed Not observed

32. Adhesiveness: Adhesive Not adhesive

33. Frequency/Voltage Hz V

Memo

Inquiry FormShijiazhuang Aier Machinery Co., Ltd

E-mail: sales@aiermachinery.com