Upload
youbaoer
View
14
Download
2
Embed Size (px)
DESCRIPTION
Pump selection chart from Shijiazhuang Aeir Machinery Co., Ltd, E-mail: [email protected]
Citation preview
The customers are required to fill in the following items in detail.
1. Discharge: m3/hr (Max.: Min: )
2. Density of slurry: %Wt
3. True Specific gravity of solids:
4. Specific gravity of the liquid including solids:
5. Specific gravity of the liquid excluding solids:
6. Kind of solid:
7. Size distribution: (Max particle size: D50: )
8. Components of the liquid excluding solids:
9. Temperature of the liquid including solids: ˚C Max: ˚C
10. pH:
11. Viscosity:
12. Desirable material: Rubber Metal Seal type: Gland Expeller Mechanical
Conditions for delivery side
13. Actual pump head: m at the highest point m at the pipe end m
14. Pipe length: m
15. Pipe diameter:
16. Valves, bends, etc.
17. Pipe material:
18. Conditions at pipe ends:
19. Others:
Conditions for intake side
20. Actual pump head: m at max.: m at min.: m
21. Pipe length: m
22. Pipe diameter:
23. Valves, bends, etc.:
24. PNSHa:
25. Conditions at pipe ends:
26. Others
27. Total pump head: mLiq
28. Total suction head: mLiq
29. Operating condition: Continuous Intermittent Hr/day
30. Sealing water: Possible Impossible
31. Bubbles mingled: Observed Not observed
32. Adhesiveness: Adhesive Not adhesive
33. Frequency/Voltage Hz V
Memo
Inquiry FormShijiazhuang Aier Machinery Co., Ltd
E-mail: [email protected]