www.hycontek.com
Product and Tool Selection Guide
About HYCON Technology
HYCON Technology was established in July, 2007 in Taipei, Taiwan. We dedicate ourselves to develop high precision and low drift analog signal processing ICs.
We specialize in several technologies: Low voltage and low power consumption IC design High precision and low noise analog circuit design High resolution Analog to Digital Converter (ADC) 8-bit and 32-bit microcontroller digital circuit design and related software/hardware
development system platform (ICE) High accuracy production calibration and quality control
Distinct from other analog or mixed signal IC design houses that focus on image, voice, communication or power management applications, HYCON emphasis on measuring and monitoring analog signals, such as temperature, pressure, weight, voltage, current, power consumption, etc..
Our product portfolio ranges from developing IC solution for medical electronics, battery management, instrumentation and metering, and industrial control field.
Managing Philosophy
Ceaseless QualityImprovement
Focus on analog circuit, strivingto be a leading IC design house
Fearless in NewChallenge
Active attitude to push every limitations
Innovative Thinking
Provide high performance and reliable solutions
Rigidly Stick to Commitment
Customer-oriented, supporting professional and diverse helps
Development Kit 34
Writer Kit 36ENOB Kit 37
TechnicalSupport
CONTENTS
HY310x Series 28HY311x Series 29
HY313x Series 30HY2613 Series 31HY461x Series 32
Others
HY10P Series 04HY11P Series 05HY12P Series 07HY13P Series 08HY16F Series 09
MixedSignal Microcontroller
HY211x Series 10HY212x Series 20
HY221x Series 22HY4145 Series 25HY4222 Series 26HY4231 Series 27
Battery Management IC
04
Mixed Sig
nal Microcontroller
Mixed Signal Microcontroller
Operation voltage 2.2V~3.6V Temperature range: - 40℃~+85℃ 24-bit ultra low noise ΣΔADC (output rate: 8sps~7.8ksps, 300nVrms @8sps) 1% high speed (2M/4M/8Mhz) RC Oscillator & low power low speed (16kHz) RC Oscillator 16 bits PWM: 2*8 bits PWM, 8+8 PWM Support built-in EPROM 64 word Support I2C interface
Model No. ADC Program Memory(word)
Data Memory(byte)
Built-in EPROM(word) RTC I/O PWM Serial
Interface Pin
HY10P40* 8-CH 2k 128 64 -1xI +8xIO
2-CH I2C
DFN 12MSOP 10SOP8 (EP)SSOP 16
Notice: Models that marked “ * ” use H08B instruction set; none specified others use H08A.
Main Features of HY10P Series
HY10P Series (OTP Type)
HY2110/HY2111/HY2112 Series
05 05
Mixed Sig
nal Microcontroller
HY10P/HY11P Series
Operation voltage: 2.4V~3.6V Temperature range: -40℃~+85℃ 24-bit ultra low noise ΣΔADC (output rate: 8sps~2ksps, 100nVrms @8sps) Comparator for 14 level LVD 1% high speed (2M) RC Oscillator & low power low speed (28kHz or 14KHz) RC Oscillator Support 32.768kHz & 1M~8M external Crystal Oscillator Driver 10 bits PWM: 1-ch~4-ch PWM Support built-in EPROM 64 word or 2.75V Low voltage built-in EPROM (LVBIE) 64 word Max. 4x40 LCD driver Support SPI/EUART interface
Main Features of HY11P Series
HY11P Series (OTP Type)
06
Mixed Sig
nal Microcontroller
Model No. ADCProgram Memory(word)
Data Memory(byte)
Built-in EPROM(word)
OPAMP TPS RTC I/O LCD Segment PWM Serial
Interface Pin
HY11P12* 4-CH 2k 128 - - Y Y4xI+
10xIO4x12 - -
LQFP 44LQFP 48QFN 48
HY11P13 8-CH 4k 256 - 1 Y Y4xI+
10xIO4x20 1-CH SPI LQFP 64
HY11P14 12-CH 8k 512 - 1 Y Y8xI+
20xIO4x40 4-CH
SPIEUART
LQFP 64LQFP 100
HY11P23 10-CH 4k 256 - 1 Y Y10xI+12xIO
1 1-CHSPI
EUART
LQFP 32QFN 32SSOP 28
HY11P24 12-CH 8k 512 - 1 Y Y18xI+20xIO
4-CHSPI
EUARTLQFP 44LQFP 48
HY11P32* 3-CH 2k 128 64 - - -4xI+8xIO
4x12 - -LQFP 44LQFP 48
HY11P33 3-CH 4k 256 64 - - Y4xI+8xIO
4x20 1-CH - LQFP 64
HY11P35 8-CH 6k 256 64 1 Y Y12xI+14xIO
4x32 4-CH - LQFP 100
HY11P36 3-CH 4k 256 64 - - Y4xI+8xIO
4x32 1-CH - LQFP 64
HY11P41 4-CH 2k 128 64 - Y -6xI+5xIO
- 1-CH SPIQFN 16SOP 16SSOP 16
HY11P42 7-CH 2k 128 64 - Y Y7xI+
12xIO- 1-CH EUART
QFN 24SSOP 28TSSOP 28
HY11P52*
HY11P52B*3-CH 2k 128 64,LV - - -
4xI+8xIO
4x12 - - LQFP 48
HY11P54 12-CH 8k 256 64,LV 1 - Y13xI+8xIO
4x32 1-CH EUARTLQFP 64
LQFP 100QFN 48
Notice: Models that marked “ * ” use H08B instruction set; none specified others use H08A.
HY2110/HY2111/HY2112 Series
07 07
Mixed Sig
nal Microcontroller
HY12P Series
8-bit OTP MCU offers differential products to the customers High resolution and high speed ΣΔADC to achieve digital T-RMS, peak hold & inrush current
functions Flexible auto range multifunctional network for reference resistor ratio self-calibration Programmable ±constant voltage/current source Dual multifunctional comparators with programmable comparison voltage for continuity test,
capacitance and frequency measurements 3 sets of 24-bit programmable counters for frequency and duty cycle measurement
Main Features of DMM IC Series
Model No. PA Network
PB Channel ADC Program
MemoryData
Memory LCD I/O Cap. T-RMS Bandwidth
Inrush Current
Peak Hold Counts Serial
Port Package
HY12P63 6 3 1 4Kx16 256x8 4xI2 12 - 1.5KHz - - 2000 - LQFP 64
HY12P65 7 5+1 1 6Kx16 256x8 4xI5 19 50mF 1.5KHz Y 1ms 5000 UART LQFP 64
HY12P66 7 5+1 1 6Kx16 256x8 4xI5 19 50mF 1.5KHz - - 5000 UART LQFP 64
HY12P Series (Digital T-RMS DMM OTP MCU)
08
Mixed Sig
nal Microcontroller
Operation voltage: 2.2V~3.6V Temperature range: -40℃~+85℃ 24-bit ultra low noise ΣΔADC (output rate: 3.8sps~31.25ksps, 90nVrms @15sps) Multi-Function Comparator for 16 level LVD, touch keys circuit and R/C sensor measurement 1% high speed (2M/4M/8MHz) RC Oscillator & low power low speed (11kHz) RC Oscillator Support 32.768kHz external Crystal Oscillator driver 16 bits PWM: 2*8 bits PWM, 8+8 PWM Support 2.75V Low voltage built-in EPROM (LVBIE) 64 word Max. 4x32 LCD driver Support SPI/I2C/EUART interface
Main Features of HY13P Series
Model No. ADCI (HG)
ADCII (LG)
Program Memory (word)
Data Memory (byte)
Built-in EPROM (word)
Touch Key OPAMP TPS RTC I/O LCD
Segment PWM Serial Interface Pin
HY13P52* 4-CH - 2k 128 64,LV 4-CH - Y Y 12xIO 4x12 2-CH - LQFP 48
HY13P53 7-CH - 4k 256 64,LV 8-CH - Y Y 17xIO 4x20 2-CH - LQFP 64
HY13P56 7-CH - 4k 256 64,LV 8-CH - Y Y 17xIO 4x32 2-CH - LQFP 64
Notice: Models that marked “ * ” use H08B instruction set; none specified others use H08A.
HY13P Series (OTP Type)
HY2110/HY2111/HY2112 Series
09 09
Mixed Sig
nal Microcontroller
HY13P/HY16F Series
Operation voltage: 2.2V~3.6V Temperature range: -40℃~+85℃ 24-bit ultra low noise ΣΔADC (output rate: 10sps~10ksps, 65nVrms @10sps) Multi-Function Comparator for 16 level LVD, touch key circuit and R/C sensor measurement. Built-in OPAMP, DAC, Charge Pump, hardware RTC 1% high speed (2M/4MHz/10MHz/20MHz) RC Oscillator & low power low speed (32kHz) RC
Oscillator Support 32.768kHz & 1M~20M external Crystal Oscillator driver 16 bits PWM: 2*8 bits PWM, 8+8 PWM Support 32 bits SPI/I2C/EUART interface
Main Features of HY16F Series
Model No. 24-bΣ△ADC
Flash (byte)
SRAM (byte)
Touch Key OPAMP DAC TPS RTC I/O PWM Serial
Interfacechange Pump LCD Pin
HY16F184 4-CH 16K 2k 4-CH 1 8bits Y 1 19 2-CHI2C
UART32bits SPI
N -LQFP 48 QFN 33
HY16F187 4-CH 32K 4k 4-CH 1 8bits Y 1 19 2-CHI2C
UART32bits SPI
N -LQFP 48 QFN 33
HY16F188 4-CH 64K 8k 4-CH 1 8bits Y 1 25 2-CHI2C
UART32bits SPI
Y - LQFP 48
HY16F196 8-CH 16K 2k 8-CH 1 8bits Y 1 21+22 4-CHI2C
UART32bits SPI
Y4x246x22
LQFP 64QFN 68
HY16F197 8-CH 32K 4k 8-CH 1 8bits Y 1 21+24 4-CHI2C
UART32bits SPI
Y4x266x24
LQFP 64QFN 68
HY16F198 8-CH 64K 8k 8-CH 1 8bits Y 1 25+34 4-CHI2C
UART32bits SPI
Y4x366X34
LQFP 100
HY16F Series (32-bit Flash Type)
Battery M
anagem
ent IC
10
Battery Management IC
Built-in high precision voltage detection circuit and delay circuit Low current consumption:
*Operation mode < 6µA (VDD=3.9V) *Sleep mode < 0.1µA (VDD=2.0V)
Charger connected pin adopts high-withstand-voltage design (CS/OC pin absolute max. rating: 20V)
0V battery charge function: "Available" or "Unavailable" is optional Small package: SOT-23-6 Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free Product quality ensures customer production defect rate < 50ppm
Main Features of HY2110, HY2111 & HY2112 Series
Battery M
anagem
ent ICHY2110/HY2111/HY2112 Series
11
Model No.
Overcharge DetectionVoltage
Overcharge Release Voltage
Overdischarge DetectionVoltage
Overdischarge Release Voltage
Discharge Overcurrent
Detection Voltage
Charger Detection Voltage
0V BatteryCharge
FunctionOther Function
VCU VCR VDL VDR VDIP VCHA V0CH
HY2110-A 4.30V±0.05V 4.10V±0.05V 2.4V±0.1V 3.0V±0.1V 150mV±30mV -0.3V AvailablePower-down
function
HY2110-C 4.28V±0.05V 4.08V±0.05V 2.4V±0.1V 3.0V±0.1V 150mV±30mV -0.3V AvailablePower-down
function
HY2110-D 4.28V±0.05V 4.08V±0.05V 2.4V±0.1V 3.0V±0.1V 150mV±30mV -0.3V AvailableAuto
OverdischargeRecovery Function
Model No.
Overcharge DetectionVoltage
Overcharge Release Voltage
Overdischarge DetectionVoltage
Overdischarge Release Voltage
Discharge Overcurrent
Detection Voltage
Charger Overcurrent
Detection Voltage
0V BatteryCharge
Function
Other Function
VCU VCR VDL VDR VDIP VCIP V0CH
HY2111-D 4.28V±0.025V 4.08V±0.05V 2.9V±0.08V 3.0V±0.08V 75mV±25mV -100mV±40mV AvailablePower-down
function
HY2111-E 4.28V±0.025V 4.08V±0.05V 2.4V±0.08V 2.5V±0.08V 150mV±25mV -100mV±40mV AvailablePower-down
function
HY2111-G 4.28V±0.025V 4.08V±0.05V 2.9V±0.08V 3.0V±0.08V 150mV±25mV -100mV±40mV AvailablePower-down
function
HY2111-H 4.28V±0.025V 4.08V±0.05V 2.9V±0.08V 3.0V±0.08V 200mV±25mV -100mV±40mV AvailablePower-down
function
HY2111-K 4.28V±0.025V 4.08V±0.05V 2.4V±0.08V 2.5V±0.08V 225mV±30mV -100mV±40mV Available
Auto OverdischargeRecovery Function
HY2111-N 4.28V±0.025V 4.08V±0.05V 2.9V±0.08V 3.0V±0.08V 150mV±25mV -100mV±40mV UnavailablePower-down
function
Model No.
Overcharge DetectionVoltage
Overcharge Release Voltage
Overdischarge DetectionVoltage
Overdischarge Release Voltage
Discharge Overcurrent
Detection Voltage
Charger Overcurrent
Detection Voltage
0V BatteryCharge
Function
VCU VCR VDL VDR VDIP VCIP V0CH
HY2112-A 3.75V±0.025V 3.60V±0.05V 2.10V±0.05V 2.30V±0.05V 100mV±15mV -200mV±30mV Available
HY2112-B 3.75V±0.025V 3.60V±0.05V 2.10V±0.05V 2.30V±0.05V 150mV±15mV -200mV±30mV Available
HY2112-C 3.75V±0.025V 3.60V±0.05V 2.10V±0.05V 2.30V±0.05V 200mV±15mV -200mV±30mV Available
HY2112-E 3.90V±0.025V 3.75V±0.05V 2.10V±0.05V 2.30V±0.05V 200mV±15mV -200mV±30mV Available
HY2112-G 3.75V±0.025V 3.25V±0.05V 1.825V±0.05V 2.37V±0.05V 100mV±15mV -100mV±20mV Available
HY2112-H 3.65V±0.025V 3.45V±0.05V 2.50V±0.05V 3.00V±0.05V 150mV±15mV -250mV±50mV Available
One-Cell Li-ion/Polymer/LiFePO4 Battery Protection IC
Battery M
anagem
ent IC
12
Built-in high precision voltage detection circuit and delay circuit High precision charge/discharge overcurrent detection voltage is flexibly configurable Low current consumption:
Operation mode < 6µA (VDD=3.9V) / Sleep mode < 0.1µA (VDD=2.0V) Charger connected pin adopts high-withstand-voltage design (CS/OC pin absolute max.
rating:20V) Small package: SOT-23-6 and DFN 6 (1.8mm*2.0mm) Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free Product quality ensures customer production defect rate < 50ppm
Main Features of HY2113 Series
Model No.
Overcharge DetectionVoltage
Overcharge Release Voltage
Overdischarge DetectionVoltage
Overdischarge Release Voltage
Discharge Overcurrent
Detection Voltage
Charger Overcurrent
Detection Voltage
Delay Time Code
Characteristic Code
VCU VCR VDL VDR VDIP VCIP - -
HY2113-A 4.280V±0.025V 4.080V±0.05V 2.30V±0.05V 2.30V±0.05V 125mV±15mV -100mV±20mV 1 A
HY2113-B 4.325V±0.025V 4.125V±0.05V 2.50V±0.05V 2.80V±0.05V 150mV±15mV -100mV±20mV 1 A
HY2113-C 4.275V±0.025V 4.075V±0.05V 2.30V±0.05V 2.30V±0.05V 150mV±15mV -100mV±20mV 1 A
HY2113-D 4.275V±0.025V 4.175V±0.05V 2.30V±0.05V 2.40V±0.05V 100mV±25mV -100mV±20mV 1 A
HY2113-E 4.300V±0.025V 4.100V±0.05V 2.30V±0.05V 2.30V±0.05V 250mV±15mV -100mV±20mV 1 B
HY2113-F 4.250V±0.025V 4.050V±0.05V 2.50V±0.05V 2.80V±0.05V 200mV±25mV -100mV±20mV 2 B
HY2113-G 4.280V±0.025V 4.080V±0.05V 3.00V±0.05V 3.00V±0.05V 75mV±15mV -100mV±20mV 3 A
One-Cell Li-ion/Polymer Battery Protection
Battery M
anagem
ent IC
13
Delay Time Code
OverchargeDelay Time
OverdischargeDelay Time
Discharge OvercurrentDelay Time
Charge OvercurrentDelay Time
Short Circuit Delay Time
TOC TOD TDIP TCIP TSIP
1 1300ms 145ms 12ms 8ms 300μs
2 1000ms 20ms 12ms 8ms 300μs
3 1300ms 145ms 6ms 8ms 300μs
4 250ms 20ms 12ms 8ms 150μs
5 1000ms 145ms 24ms 16ms 300μs
6 1000ms 145ms 12ms 8ms 300μs
Delay Time Code ( Time Parameter Options )
Characteristic Code (Other Function Options)
HY2113 Series
Characteristic Code 0 V Battery Charge Function Power-down Function/ Auto Overdischarge Recovery Function
A Available With power-down Function
B Available With auto overdischarge recovery function
C Unavailable With auto overdischarge recovery function
Model No.
Overcharge DetectionVoltage
Overcharge Release Voltage
Overdischarge DetectionVoltage
Overdischarge Release Voltage
Discharge Overcurrent
Detection Voltage
Charger Overcurrent
Detection Voltage
Delay Time Code
Characteristic Code
VCU VCR VDL VDR VDIP VCIP - -
HY2113-H 4.280V±0.025V4.280V+0.025V4.280V - 0.050V
2.80V±0.05V 2.80V±0.05V 50mV±25mV -50mV±20mV 3 A
HY2113-I 4.190V±0.025V4.190V+0.025V4.190V - 0.050V
2.70V±0.05V 3.00V±0.05V 100mV±15mV -40mV±20mV 2 C
HY2113-J 4.275V±0.025V 4.075V±0.05V 2.80V±0.05V 2.80V±0.05V 150mV±25mV -100mV±20mV 1 B
HY2113-K 4.250V±0.025V 4.190V±0.05V 2.80V±0.05V 3.00V±0.05V 150mV±15mV -100mV±20mV 5 B
HY2113-L 4.200V±0.025V4.200V+0.025V4.200V - 0.050V
2.50V±0.05V 2.50V±0.05V 150mV±25mV -100mV±20mV 1 A
HY2113-M 4.280V±0.025V4.280V+0.025V4.280V - 0.050V
2.80V±0.05V 2.80V±0.05V 250mV±15mV -100mV±20mV 1 A/B
HY2113-N 4.380V±0.025V 4.280V±0.05V 2.60V±0.05V 2.80V±0.05V 150mV±25mV -175mV±25mV 4 A/B
HY2113-O 4.400V±0.025V 4.200V±0.05V 2.80V±0.05V 3.00V±0.05V 150mV±15mV -200mV±30mV 1 A/B/C
HY2113-P 4.250V±0.025V 4.190V±0.05V 2.50V±0.05V 3.00V±0.05V 150mV±25mV -100mV±20mV 5 B
HY2113-R 4.280V±0.025V 4.130V±0.05V 2.80V±0.05V 3.10V±0.05V 100mV±15mV -100mV±20mV 1 A
HY2113-S 4.275V±0.025V 4.075V±0.05V 2.80V±0.05V 3.00V±0.05V 150mV±15mV -100mV±20mV 1 B
Battery M
anagem
ent IC
14
Built-in high precision voltage detection circuit and delay circuit High precision charge/discharge overcurrent detection voltage is flexibly configurable Low current consumption:
*Operation mode < 6µA (VDD=3.9V) *Sleep mode < 0.1µA (VDD=2.0V)
Charger connected pin adopts high-withstand-voltage design (CS/OC pin absolute max. rating: 20V)
0V battery charge function:“Available"or“Unavailable"is optional Auto overdischarge recovery function“Yes"or“No"is selectable Small package: DFN 6 (1.8mm*2.0mm) & SOT-23-6 Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free Product quality ensures customer production defect rate < 50ppm
Main Features of HY2116 Series
Battery M
anagem
ent IC
15
HY2116 Series
Model No.
Overcharge DetectionVoltage
Overcharge Release Voltage
Overdischarge DetectionVoltage
Overdischarge Release Voltage
Discharge Overcurrent
Detection Voltage
Charger Overcurrent
Detection Voltage
Delay Time Code
Characteristic Code
VCU VCR VDL VDR VDIP VCIP - -
HY2116-A 4.280V±0.025V 4.100V±0.05V 2.40V±0.05V 2.50V±0.05V 180mV±10mV -225mV±50mV 6 B
HY2116-B 4.325V±0.025V 4.150V±0.05V 2.50V±0.05V 3.00V±0.05V 150mV±10mV -200mV±50mV 6 A
HY2116-C 4.280V±0.025V 4.100V±0.05V 2.30V±0.05V 2.50V±0.05V 150mV±10mV -225mV±50mV 6 B
HY2116-D 4.275V±0.025V 4.175V±0.05V 3.00V±0.05V 3.20V±0.05V 150mV±10mV -200mV±30mV 6 B
HY2116-O 4.425V±0.025V 4.225V±0.05V 2.50V±0.05V 2.50V±0.05V 150mV±10mV -200mV±50mV 6 A
HY2116-H 4.420V±0.025V 4.235V±0.05V 2.50V±0.05V 2.70V±0.05V 200mV±10mV -225mV±50mV 2 B
One-Cell Li-ion/Polymer Battery Protection IC
Delay Time Code
OverchargeDelay Time
OverdischargeDelay Time
Discharge OvercurrentDelay Time
Charge OvercurrentDelay Time
Short Circuit Delay Time
TOC TOD TDIP TCIP TSIP
1 1300ms 145ms 12ms 8ms 300μs
2 1000ms 20ms 12ms 8ms 300μs
3 1300ms 145ms 6ms 8ms 300μs
4 250ms 20ms 12ms 8ms 150μs
5 1000ms 145ms 24ms 16ms 300μs
6 1000ms 145ms 12ms 8ms 300μs
Delay Time Code ( Time Parameter Options )
Characteristic Code (Other Function Options)
Characteristic Code 0V Battery Charge Function Power-down Function/ Auto Overdischarge Recovery Function
A Available With power-down Function
B Available With auto overdischarge recovery function
C Unavailable With auto overdischarge recovery function
Battery M
anagem
ent IC
16
Provide high precision overcurrent detection when used with current sense resistance Built-in high precision voltage detection circuit and delay circuit High precision charge/discharge overcurrent detection voltage is flexibly configurable Low current consumption:
*Operation mode < 6µA (VDD=3.9V) *Sleep mode < 0.1µA (VDD=2.0V)
Charger connected pin adopts high-withstand-voltage design (CS/OC pin absolute max. rating: 20V)
0V battery charge function:“Available"or“Unavailable"is optional Auto overdischarge recovery function“Yes"or“No"is selectable Tiny package: DFN 6 (1.4mm*1.4mm) & SOT-23-6 Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free
Main Features of HY2115 Series
Battery M
anagem
ent IC
17
HY2115 Series
Model No.
Overcharge DetectionVoltage
Overcharge Release Voltage
Overdischarge DetectionVoltage
Overdischarge Release Voltage
Discharge Overcurrent Detection Voltage
Charger Overcurrent Detection Voltage
Delay Time Code
Characteristic Code
VCU VCR VDL VDR VDIP VCIP - -
HY2115-AC 4.405V±0.02V4.405V+0.02V4.405V -0.03V
2.4V±0.035V 2.4V±0.035V 80mV±5.0mV -50mV±5.0mV 9 D
HY2115-BC 4.405V±0.02V4.405V+0.02V4.405V -0.03V
2.4V±0.035V 2.4V±0.035V 32mV±4.8mV -20mV±3.0mV 9 D
HY2115-CC 4.425V±0.02V4.425V+0.02V4.425V -0.03V
2.4V±0.035V 2.4V±0.035V 34mV±5.0mV -22mV±3.0mV 9 D
HY2115-DC 4.435V±0.02V4.435V+0.02V4.435V -0.03V
2.4V±0.035V 2.4V±0.035V 28mV±4.2mV -28mV±4.2mV 9 D
HY2115-LB 4.280V±0.02V4.280V+0.02V4.280V -0.03V
2.8V±0.035V 2.8V±0.035V 42mV±6.0mV -50mV±6.0mV 9 D
HY2115-MC 4.280V±0.02V4.280V+0.02V4.280V -0.03V
2.4V±0.035V 2.4V±0.035V 42mV±6.0mV -30mV±4.5mV 9 D
HY2115-NB 4.250V±0.02V4.250V+0.02V4.250V -0.03V
2.8V±0.035V 2.8V±0.035V 42mV±6.0mV -50mV±6.0mV 9 D
One-Cell Li-ion/Polymer Battery Protection IC
Delay Time Code
OverchargeDelay Time
OverdischargeDelay Time
Discharge OvercurrentDelay Time
Charge OvercurrentDelay Time
Short CircuitDelay Time
TOC TOD TDIP TCIP TSIP
9 1040ms 120ms 8ms 8ms 300μs
Delay Time Code ( Time Parameter Options )
Characteristic Code (Other Function Options)
Characteristic Code 0 V Battery Charge Function Power-down Function/ Auto Overdischarge Recovery Function
D Unavailable With power-down Function
Battery M
anagem
ent IC
18
Provide high precision short current detection when used with current sense resistance Provide high precision over-current detection when used with current sense resistance Built-in high precision voltage detection circuit and delay circuit High precision charge/discharge over-current detection voltage is flexibly configurable Low current consumption:
*Operation mode < 8µA (VDD=3.9V) *Sleep mode < 0.1µA (VDD=2.0V)
Charger connected pin adopts high-withstand-voltage design (CS/OC pin absolute max. rating: 20V)
0V battery charge function:“Unavailable"&“Available" With auto over-discharge recovery function:“Yes"or“No" is selectable Tiny package: DFN 6 (1.4mm*1.4mm) Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free
Main Features of HY2118 Series
Battery M
anagem
ent IC
19
HY2118 Series
Model No.
Overcharge DetectionVoltage
Overcharge Release Voltage
Overdischarge DetectionVoltage
Overdischarge Release Voltage
Discharge Overcurrent Detection Voltage
Charger Overcurrent Detection Voltage
Delay Time Code
Characteristic Code
VCU VCR VDL VDR VDIP VCIP - -
HY2118-AC 4.425V±0.02V4.425V+0.02V4.425V -0.03V
2.4V±0.035V 2.4V±0.035V 34mV±5.0mV -22mV±3.3mV 2 J
HY2118-BC 4.280V±0.02V4.280V+0.02V4.280V -0.03V
2.4V±0.035V 2.4V±0.035V 32mV±4.8mV -30mV±4.5mV 2 J
HY2118-CC 4.425V±0.02V4.425V+0.02V4.425V -0.03V
2.8V±0.035V 2.8V±0.035V 40mV±5.0mV -30mV±4.5mV 2 J
HY2118-DC 4.445V±0.02V4.445V+0.02V4.445V -0.03V
2.4V±0.035V 2.4V±0.035V 30mV±4.5mV -20mV±3.0mV 2 J
1- Cell Lithium-ion/Lithium Polymer Battery PacksProtection IC
Delay Time CodeOverchargeDelay Time
Overdischarge Delay Time
Discharge OvercurrentDelay Time
Charge OvercurrentDelay Time
Short Circuit Delay Time
TOC TOD TDIP TCIP TSIP
2 1.0s 20ms 12ms 16ms 250μs
Delay Time Code ( Time Parameter Options )
Characteristic Code (Other Function Options)
Characteristic Code 0V Battery Charge Function Power-down Function/ Auto Overdischarge Recovery Function
J Unavailable With power-down Function
Battery M
anagem
ent IC
20
Model No.
Overcharge DetectionVoltage
Overcharge Release Voltage
Overdischarge DetectionVoltage
Overdischarge Release Voltage
Discharge Overcurrent Detection Voltage
Charger Overcurrent Detection Voltage
0V Battery Charge Function
Delay Time Code
Characteristic Code
VCUn VCRn VDLn VDRn VDIP VCIP V0CH - -
HY2120-A 4.35V±0.025V 4.15V±0.05V 2.30V±0.08V 3.00V±0.1V 300mV±30mV -210mV±30mV available 1 A
HY2120-B 4.35V±0.025V 4.15V±0.05V 2.30V±0.08V 3.00V±0.1V 200mV±30mV -210mV±30mV available 1 A
HY2120-C 4.28V±0.025V 4.08V±0.05V 2.90V±0.08V 3.00V±0.1V 200mV±30mV -210mV±30mV available 1 A
HY2120-D 4.28V±0.025V 4.08V±0.05V 2.25V±0.08V 2.95V±0.1V 200mV±30mV -210mV±30mV available 1 A
HY2120-E 4.28V±0.025V 4.08V±0.05V 2.25V±0.08V 2.95V±0.1V 150mV±10mV -210mV±30mV available 1 A
HY2120-F 4.30V±0.025V 4.10V±0.05V 2.90V±0.08V 3.00V±0.1V 200mV±30mV -210mV±30mV available 1 A
HY2120-G 4.28V±0.025V 4.08V±0.05V 3.10V±0.08V 3.20V±0.1V 200mV±30mV -210mV±30mV available 1 A
HY2120-H 4.38V±0.025V 4.18V±0.05V 2.40V±0.08V 2.50V±0.1V 200mV±30mV -210mV±30mV available 1 B
HY2120-L 4.25V±0.025V 4.05V±0.05V 2.80V±0.08V 3.00V±0.1V 200mV±30mV -210mV±30mV available 1 A
HY2120-M 4.45V±0.025V 4.25V±0.05V 2.25V±0.08V 2.95V±0.1V 200mV±30mV -210mV±30mV available 1 A
HY2120-N 4.28V±0.025V 4.08V±0.05V 2.80V±0.08V 3.00V±0.1V 200mV±30mV -210mV±30mV available 1 A
Two-Cell Li-ion/Polymer/LiFePO4 Battery Protection IC
Built-in high precision voltage detection circuit and delay circuit Low current consumption:
*Operation mode < 9µA (VDD=7.8V) *Sleep mode < 0.1µA (VDD=4.0V)
Charger connected pin adopts high-withstand-voltage design (CS/OC pin absolute max. rating: 33V) 0V battery charge function:“Available"or“Unavailable"is optional Small package: SOT-23-6 Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free
Main Features of HY2120 & HY2122 Series
Battery M
anagem
ent IC
21
HY2120/HY2122 Series
Model No.
Overcharge DetectionVoltage
Overcharge Release Voltage
Overdischarge DetectionVoltage
Overdischarge Release Voltage
Discharge Overcurrent
Detection Voltage
Charger Overcurrent
Detection Voltage
Delay Time Code
Characteristic Code
VCUn VCRn VDLn VDRn VDIP VCIP - -
HY2122-A 3.65V±0.025V 3.45V±0.05V 2.00V±0.08V 2.50V±0.1V 200mV±30mV -200mV±30mV 1 A
HY2122-A 3.65V±0.025V 3.45V±0.05V 2.00V±0.08V 2.50V±0.1V 200mV±30mV -200mV±30mV 1 B
HY2122-B 3.75V±0.025V 3.25V±0.05V 1.80V±0.08V 2.30V±0.1V 200mV±30mV -200mV±30mV 1 A
HY2122-E 3.95V±0.025V 3.50V±0.05V 2.20V±0.08V 2.50V±0.1V 200mV±30mV -200mV±30mV 1 A
Characteristic Code (Other Function Options)
Characteristic Code 0V Battery Charge Function Power-down Function/
Auto Overdischarge Recovery Function
A Available With power-down Function
B Available With auto overdischarge recovery function
C Unavailable With auto overdischarge recovery function
Delay Time Code
OverchargeDelay Time
OverdischargeDelay Time
Discharge OvercurrentDelay Time
Charge OvercurrentDelay Time
Short Circuit Delay Time
TOC TOD TDIP TCIP TSIP
1 1000ms 110ms 10ms 7ms 250μs
Delay Time Code ( Time Parameter Options )
Battery M
anagem
ent IC
22
Built-in high precision voltage detection circuit and delay circuit Low current consumption:
*Operation mode < 3.5µA (VDD=3.2V) *Sleep mode < 0.5µA (VDD=2.0V)
Small package: SOT-23-6 package Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free
Main Features of HY2212 & HY2213 Series
Battery M
anagem
ent IC
23
HY2212/HY2213 Series
Model No.Overcharge Detection Voltage Overcharge Release Voltage Delay Time Code Characteristic Code
VCU VCR - -
HY2212-A 3.60V±0.025V3.60V+0.025V3.60V -0.035V
3 B
HY2212-B 3.60V±0.025V 3.59V±0.035V 3 A
HY2213-A 4.20V±0.025V4.20V+0.025V4.20V -0.035V
3 B
HY2213-B 4.20V±0.025V 4.19V±0.035V 3 A
HY2213-C 4.18V±0.025V4.18V+0.025V4.18V -0.035V
3 A
One-Cell Li-ion/Polymer Battery Charge Balance IC
Delay Time CodeOvercharge Delay Time
TOC
3 250ms
Delay Time Code ( Time Parameter Options )
Characteristic Code (Other Function Options)
Characteristic Code OUT Effective Operation
A N-MOSFET balance control: OUT output status L H Effective
B P-MOSFET balance control: OUT output status H L Effective
Battery M
anagem
ent IC
24
Model No.Overcharge Detection
VoltageOvercharge Release
VoltageOvercharge
Detection Delay Delay Time Code Characteristic Code
VCU VCR TOC - -
HY2215-B 4.20V±0.025V 4.19V±0.035V 250ms 3 A
HY2215-C 4.18V±0.025V4.18V+0.025V4.18V -0.035V
250ms 3 A
Model No.Overcharge Detection
VoltageOvercharge Release
VoltageOvercharge
Detection Delay Delay Time Code Characteristic Code
VCU VCR TOC - -
HY2216-B 3.60V±0.025V 3.59V±0.035V 250ms 3 A
One-Cell Li-ion/Polymer Charge Balance IC
Characteristic Code (Other Function Options)
Characteristic Code OUT Effective Operation
A Balance control NPN-BJT; OUT output status LèH effective
Built-in high precision voltage detection circuit and delay circuit Low current consumption:
*Operation mode < 3.5µA (VDD=3.9V) *Sleep mode < 0.5µA (VDD=2.0V)
Small package: SOT-23-6 package Wide operation temperature range:
-40℃~+85℃ All products are in Green packages:
Pb & Halogen-free
Main Features of HY2215 & HY2216 Series
Battery M
anagem
ent IC
25
HY2215/HY2216/HY4145 Series
Used as stand–alone battery gauge for single Li+ cell battery applications *Integrate dual 16-bit ADCs for precision voltage, current, and temperature measurements *Use a low cost and low value sense resistor with calibration for current measurement *Use integrated and external temperature sensors for temperature measurement
Integrate accurate battery capacity estimate system *Integrate GaugePackTM algorithm – mixed algorithm with coulomb counting, open circuit cell voltage measurement and cell characteristics *Compensate Rate, temperature, age and self–discharge effects automatically *Require no fully battery charge-to-discharge or discharge-to-charge recycling for capacity learning process *Backup specific battery capacity information to Nonvolatile (NV) flash memory automatically
Feature programmable protection alerts *Protections for voltage, current, and temperature faults *Provide pin alert for voltage, current, and temperature protection
Backup battery lifetime data to Nonvolatile (NV) flash memory automatically Provide 96 bytes Nonvolatile (NV) user scratch pad flash memory
Main Features of HY4145 Series
Model No. Cell No Protection Interface Authentication User Flash (Bytes) Package
HY4145 1 JEITA I2C/1-Wire SHA-1 96 DFN 12
Single Cell Li+ Battery Gauge IC with Protection IC
Battery M
anagem
ent IC
26
Used as stand–alone battery gauge for 1 to 3 Li+ Cell battery applications *Integrate dual 16-bit ADCs for precision voltage, current, and temperature measurements *Use a low cost and low value sense resistor with calibration for current measurement *Use integrated and external temperature sensors for temperature measurement
Integrate accurate battery capacity estimate system *Integrate GaugePackTM algorithm – mixed algorithm with coulomb counting, open circuit cell voltage measurement and cell characteristics *Compensate rate, temperature, age and self–discharge effects automatically *Require no fully battery charge-to-discharge or Discharge-to-charge recycling for capacity learning process *Backup specific battery capacity information to Nonvolatile (NV) Flash memory automatically
Support LEDs for capacityindication Feature programmable protection alerts
*Protections for voltage, current, and temperature faults *Provide pin alert for voltage, current, and temperature protection
Backup battery lifetime data to Nonvolatile (NV) Flash memory automatically Provide 96 bytes Nonvolatile (NV)user scratch pad Flash memory
Main Features of HY4222 Series
Model No. Cell No Protection Interface Authentication User Flash (Bytes) Package
HY4222 1 JEITA 2-Wire ( I2C) SHA-1 96 TSSOP 20
1-to-3 Cell Li Metal Battery Gauge IC
Battery M
anagem
ent IC
27
HY4222/HY4231 Series
Used as stand–alone battery gauge for 1 to 3 Li+ Cell battery applications *Integrate dual 16-bit ADCs for precision voltage, current, and temperature measurements *Use a low cost and low value sense resistor with calibration for current measurement *Use integrated and external temperature sensors for temperature measurement
Integrate accurate battery capacity estimate system *Integrate GaugePackTM algorithm – mixed algorithm with coulomb counting, open circuit cell voltage measurement and cell characteristics *Compensate rate, temperature, age and self–discharge effects automatically *Require no fully battery charge-to-discharge or discharge-to-charge recycling for capacity learning process *Backup specific battery capacity information to Nonvolatile (NV) Flash memory automatically
Feature programmable battery capacity indications *Provide 3 or 4 LEDs for capacity indications
Feature programmable protection alerts *Protections for voltage, current, and temperature faults *Provide pin alert for voltage, current, and temperature protection
Backup battery lifetime data to Nonvolatile (NV) Flash memory automatically Provide 96 bytes Nonvolatile (NV) user scratch Pad Flash memory
Main Features of HY4231 Series
Model No. Cell No Protection Interface Authentication User Flash (Bytes) Package
HY4231 1 JEITA 2-Wire (SMB) SHA-1 96 TSSOP 20
1-to-3 Cell Li+ Battery Gauge IC with Direct Connection
28
Others
Others
Operation voltage: 2.4V~3.6V Temperature range: -40℃~+85℃ Built-in VDDA regulator, 2.4V, 2.7V, 3.0V and 3.3V voltage selection Built-in temperature sensor with ±2℃ accuracy Up to 4 analog channels 24-bit fully differential ΣΔ Analog-to-Digital Converter (ADC) *Lowest RMS noise level: 50nV *Output rate, 10, 80, 640 and 2560SPS selection *50/60Hz signal rejection *Reference input buffer Operation current: *950µA @ gain=64, 128 *300µA @ gain=1, 2 or 4 Built-in PGA, x1, x2, x4… x128 gain amplification
Main Features of HY310x Series (Σ△ADC)
Model No. Architecture Input
ChannelsENOB (Bits)
RMS Noise System Clock Sample
Rate (Max)
Built-in Temp. Sensor
DC Offset Setting
Interface Package
HY3102 Sigma-Delta 2 2150nV
(10SPS)Int. 320kHz 2560SPS YES 4 bits SPI SSOP 16
HY3106 Sigma-Delta 4 2150nV
(10SPS)Int. 320kHz
Ext.4.9152MHz2560SPS YES 4 bits SPI SSOP 16
Data Converters
29
Others
HY310x/HY311x Series
Operation voltage: 2.4V~3.6V Temperature range: -40℃~+85℃ Built-in VDDA regulator, 2.4V, 2.7V, 3.0V and 3.3V voltage selection Built-in Rail-to-Rail OPAMP Operation current: *Full speed: 1050µA (OPAMP excluded) *Sleep current: 1µA 24-bit fully differential ΣΔ Analog-to-Digital Converter (ADC)*Built-in PGA, x1, x2, x4…x128 gain amplification *Lowest RMS noise level: 100nVrms *Output rate up to 7680SPS *50/60Hz signal rejection *Symmetric analog input network *Up to 4 analog channels *Built-in 4-bit DC bias voltage *Built-in high impedance input buffer at reference end
Main Features of HY311x Series (Σ△ADC)
Model No. Architecture Input
ChannelsENOB (Bits)
RMS Noise System Clock Sample
Rate (Max)
Built-in Temp. Sensor
DC Offset Setting
Interface Package
HY3116 Sigma-Delta 2 21100nV
(10SPS)Int. 327kHz/1MHz 7680SPS NO 4 bits I2C MSOP 10
HY3118 Sigma-Delta 4 21100nV
(10SPS)Int. 327kHz/1MHz
Ext.4.9152MHz7680SPS YES 4 bits I2C SSOP 16
30
Others
High resolution and high speed ΣΔADC to achieve digital T-RMS, peak hold & inrush current functions Flexible auto range multifunctional network for reference resistor ratio self-calibration Programmable capacitors array for ACV bandwidth compensation Programmable ±constant voltage/current source Dual multifunctional comparators with programmable comparison voltage for continuity test,
capacitance and frequency measurements 3 sets of 24-bit programmable counters for frequency and duty cycle measurement
Analog Front End for DMM
Model No.
PA Network
PB Channel
High Precision
High Speed
Built-inOPA
Built-in Cap. Cap. T-RMS
BandwidthInrush
CurrentPeak Hold Counts Serial
Port Package
ADC ADC Array
HY3130 10 9 1 1 2 Y 50mF 8KHz Y 0.1ms 5000 SPI LQFP 48
HY3131 10 9 1 2 2 Y 50mF 8KHz Y 0.1ms 50000 SPI LQFP 48
Main Features of HY313x Series (Σ△ADC)
31
Others
HY313x/HY2613 Series
Operation voltage: 2.4V~5.5V Temperature range: -40℃~+85℃ Max. 4x36 segments or 4x32 segments (+LED Back Light) 1/2 or 1/3 Bias, 1/4 Duty support High side or low side driver (Constant Adjust support) Built-in voltage pump has 8 output voltage LED Back Light Function, constant current:
15mA/4.2V IQR function output (support time base and WDT NMI) 2-wire I2C serial communication interface (SCL,SDA) Low power consumption, 7.5µA at
operation mode
Main Features of HY2613 Series
LCD Controller and Driver
Model No. LCD Segment
LED Driver
VLCD Charge Pump LCD Mode IRQ Serial
Interface Package
HY2613B 4X36 - - Low Side - I2C LQFP 48/TSSOP 48
HY2613C 4X32 Yes Yes High Side Yes I2C LQFP 48/TSSOP 48
32
Others
Mutual capacitive sensing techniques: True multi-touch with up to 11 points of absolution X and Y coordinates 32-bit microcontroller for algorithm execution Supports precise16-bit ADCs for input signal collection Supports auto-calibration function to prevent environmental variations Supports up to 28 transmit lines (TXs) and 16 receive lines (RXs) Supports up to 10.1" touch screen Supports more than 100Hz high report rate Optional I2C/SPI interfaces supported Supports wide voltage operation range:2.6V to 3.6V Supports direct communication connect: 1.8V/AVDD IOVCC Capable of driving single channel (transmit/receive) resistance: up to30K Ω Capable of supporting single channel (transmit/receive) capacitance: 60 pF Optimal sensing mutual capacitor: 1pF~4pF Immune to RF and power noise interferences Low power modes supported: active, monitor, and sleep Operating temperature range: -20℃~+85℃ Support Pb-free package
HY46xx accommodate a wide range of applications with a set of buttons up to a 2D touch sensing device, their typical applications as listed below.
Mobile phones, smart phones Tablet PC Navigation systems, GPS Game consoles Car applications POS (Point of Sales) devices Portable MP3 and MP4 media players Digital cameras
True Multi-Touch Capacitive Touch Panel Controller
Main Features of HY461x Series
Typical Applications
33
Others
HY461x Series
HY46xx System Architecture Diagram
Model No.Panel Package
Touch Panel Recommended PitchTX RX Type Pin Size
HY4613 21 12 QFN6*6 48 0.75-P0.4 ≤5.0" ~5mm
HY4614 28 16 QFN8*8 68 0.75-P0.4 ≤10.1" ~6mm
Technical Support
34
Main Tool ICE Board Control Board
Accessories Power Supply DC9V USB A/B
Supported Model HY10P Series
Main Tool ICE Board Target Board Control Board
Accessories Power Supply DC9V USB A/B
Supported Model HY13P Series
Main Tool ICE Board Target Board Control Board
Accessories Power Supply DC9V USB A/BProgramming line 6P/2.0 PS2 6P
Supported Model HY11P Series
Technical SupportDevelopment Kit
HY10S40-DK01
HY13S00-DK01
HY11S14-DK03/DK05
Technical Support
Development Kit
35
Main Tool ICE Board Control Board
Accessories Power Supply DC9V Programming line 6P/2.0 PS2 6P
Supported Model HY12P Series
Main Tool Target/Prototyping BoardUSB debug adapter (HY-Protool)
Accessories USB A/B Extenal line 8P/2.54 DVD ROM
Supported Model HY16F Series
HY12S65-DK03
HY16F00-DK02
36
Technical Support
Main Tool Programmer Board
Accessories Power Supply DC9V USB A/B Programming line 6P/2.0 Extenal line 8P/2.54
Supported Model HY11P SeriesHY12P Series
Writer Kit
HY10000-WK06
Main Tool Programmer Board
Accessories Power Supply DC9V USB A/B Programming line 6P/2.0
Supported Model HY10P SeriesHY13P Series
HY13S00-CM01
Main Tool Programmer Board
Accessories Power Supply DC5VUSB A/B Programming line 5Pin 2.54mm
Supported Model HY16F Series
HY16F00-WK01
37
Technical Support
Writer Kit/ENOB Kit
Main Tool Communication Board ENOB Board
Accessories USB A/B Extenal line 6P/2.54
Supported Model HY310x Series by HY3106
ENOB Kit
HY3106-AK01
Main Tool Communication Board ENOB Board
Accessories USB A/B Extenal line 4P/2.54
Supported Model HY311x Series by HY3118
HY3118-AK01
Main Tool Communication Board ENOB Board
Accessories USB A/B Extenal line 6P/2.54
Supported Model HY313x Series by HY3131
HY3131-AK01
Technical Support
Main Tool Communication Board HY11P24 ENOB Board
Accessories USB A/B Extenal line 6P/2.54
Supported Model HY11P Series by HY11P24
Main Tool Communication Board HY12P65 ENOB
Accessories USB A/B Extenal line 6P/2.54
Supported Model HY12P Series by HY12P65
Main Tool Communication BoardHY4145 Target Board
Accessories USB A/BExtenal line 3P/2.54
Supported Model HY4145
HY11P Series (HY11P24-AK01)
HY12P Series
HY4145-AK01
38
Technical Support
The product information listed in this selection guide is subject to change without further notice.
Please contect us for update infomation.
Distributor Information
www.hycontek.com
Taiwan5F., No.172, Sec.4, Chengde Rd., Shilin Dist., Taipei City 11167, TaiwanTEL:+886-2-2880 4288 FAX:+886-2-2880 4287E-mail:[email protected]
ChinaTerra Pines Building South Tower 1615, Tairan Six Rd.,Futian Dist., Shenzhen 518040, ChinaTEL:+86-755-8364-9119 FAX:+86-755-8364-7796
First edition : 2014/05