HYCON Product Selection Guide 2014

www.hycontek.com

Product and Tool Selection Guide

About HYCON Technology

HYCON Technology was established in July, 2007 in Taipei, Taiwan. We dedicate ourselves to develop high precision and low drift analog signal processing ICs.

We specialize in several technologies: Low voltage and low power consumption IC design High precision and low noise analog circuit design High resolution Analog to Digital Converter (ADC) 8-bit and 32-bit microcontroller digital circuit design and related software/hardware

development system platform (ICE) High accuracy production calibration and quality control

Distinct from other analog or mixed signal IC design houses that focus on image, voice, communication or power management applications, HYCON emphasis on measuring and monitoring analog signals, such as temperature, pressure, weight, voltage, current, power consumption, etc..

Our product portfolio ranges from developing IC solution for medical electronics, battery management, instrumentation and metering, and industrial control field.

Managing Philosophy

Ceaseless QualityImprovement

Focus on analog circuit, strivingto be a leading IC design house

Fearless in NewChallenge

Active attitude to push every limitations

Innovative Thinking

Provide high performance and reliable solutions

Rigidly Stick to Commitment

Customer-oriented, supporting professional and diverse helps

Development Kit 34

Writer Kit 36ENOB Kit 37

TechnicalSupport

CONTENTS

HY310x Series 28HY311x Series 29

HY313x Series 30HY2613 Series 31HY461x Series 32

Others

HY10P Series 04HY11P Series 05HY12P Series 07HY13P Series 08HY16F Series 09

MixedSignal Microcontroller

HY211x Series 10HY212x Series 20

HY221x Series 22HY4145 Series 25HY4222 Series 26HY4231 Series 27

Battery Management IC

04

Mixed Sig

nal Microcontroller

Mixed Signal Microcontroller

Operation voltage 2.2V~3.6V Temperature range: - 40℃~+85℃ 24-bit ultra low noise ΣΔADC (output rate: 8sps~7.8ksps, 300nVrms @8sps) 1% high speed (2M/4M/8Mhz) RC Oscillator & low power low speed (16kHz) RC Oscillator 16 bits PWM: 2*8 bits PWM, 8+8 PWM Support built-in EPROM 64 word Support I2C interface

Model No. ADC Program Memory(word)

Data Memory(byte)

Built-in EPROM(word) RTC I/O PWM Serial

Interface Pin

HY10P40* 8-CH 2k 128 64 -1xI +8xIO

2-CH I2C

DFN 12MSOP 10SOP8 (EP)SSOP 16

Notice: Models that marked “ * ” use H08B instruction set; none specified others use H08A.

Main Features of HY10P Series

HY10P Series (OTP Type)

HY2110/HY2111/HY2112 Series

05 05

Mixed Sig

nal Microcontroller

HY10P/HY11P Series

Operation voltage: 2.4V~3.6V Temperature range: -40℃~+85℃ 24-bit ultra low noise ΣΔADC (output rate: 8sps~2ksps, 100nVrms @8sps) Comparator for 14 level LVD 1% high speed (2M) RC Oscillator & low power low speed (28kHz or 14KHz) RC Oscillator Support 32.768kHz & 1M~8M external Crystal Oscillator Driver 10 bits PWM: 1-ch~4-ch PWM Support built-in EPROM 64 word or 2.75V Low voltage built-in EPROM (LVBIE) 64 word Max. 4x40 LCD driver Support SPI/EUART interface



06

Mixed Sig

nal Microcontroller

Model No. ADCProgram Memory(word)

Data Memory(byte)

Built-in EPROM(word)

OPAMP TPS RTC I/O LCD Segment PWM Serial

Interface Pin

HY11P12* 4-CH 2k 128 - - Y Y4xI+

10xIO4x12 - -

LQFP 44LQFP 48QFN 48

HY11P13 8-CH 4k 256 - 1 Y Y4xI+

10xIO4x20 1-CH SPI LQFP 64

HY11P14 12-CH 8k 512 - 1 Y Y8xI+

20xIO4x40 4-CH

SPIEUART

LQFP 64LQFP 100

HY11P23 10-CH 4k 256 - 1 Y Y10xI+12xIO

1 1-CHSPI

EUART

LQFP 32QFN 32SSOP 28

HY11P24 12-CH 8k 512 - 1 Y Y18xI+20xIO

4-CHSPI

EUARTLQFP 44LQFP 48

HY11P32* 3-CH 2k 128 64 - - -4xI+8xIO

4x12 - -LQFP 44LQFP 48

HY11P33 3-CH 4k 256 64 - - Y4xI+8xIO

4x20 1-CH - LQFP 64

HY11P35 8-CH 6k 256 64 1 Y Y12xI+14xIO

4x32 4-CH - LQFP 100

HY11P36 3-CH 4k 256 64 - - Y4xI+8xIO

4x32 1-CH - LQFP 64

HY11P41 4-CH 2k 128 64 - Y -6xI+5xIO

- 1-CH SPIQFN 16SOP 16SSOP 16

HY11P42 7-CH 2k 128 64 - Y Y7xI+

12xIO- 1-CH EUART

QFN 24SSOP 28TSSOP 28

HY11P52*

HY11P52B*3-CH 2k 128 64,LV - - -

4xI+8xIO

4x12 - - LQFP 48

HY11P54 12-CH 8k 256 64,LV 1 - Y13xI+8xIO

4x32 1-CH EUARTLQFP 64

LQFP 100QFN 48



07 07

Mixed Sig

nal Microcontroller

HY12P Series

8-bit OTP MCU offers differential products to the customers High resolution and high speed ΣΔADC to achieve digital T-RMS, peak hold & inrush current

functions Flexible auto range multifunctional network for reference resistor ratio self-calibration Programmable ±constant voltage/current source Dual multifunctional comparators with programmable comparison voltage for continuity test,

capacitance and frequency measurements 3 sets of 24-bit programmable counters for frequency and duty cycle measurement

Main Features of DMM IC Series

Model No. PA Network

PB Channel ADC Program

MemoryData

Memory LCD I/O Cap. T-RMS Bandwidth

Inrush Current

Peak Hold Counts Serial

Port Package

HY12P63 6 3 1 4Kx16 256x8 4xI2 12 - 1.5KHz - - 2000 - LQFP 64

HY12P65 7 5+1 1 6Kx16 256x8 4xI5 19 50mF 1.5KHz Y 1ms 5000 UART LQFP 64

HY12P66 7 5+1 1 6Kx16 256x8 4xI5 19 50mF 1.5KHz - - 5000 UART LQFP 64

HY12P Series (Digital T-RMS DMM OTP MCU)

08

Mixed Sig

nal Microcontroller

Operation voltage: 2.2V~3.6V Temperature range: -40℃~+85℃ 24-bit ultra low noise ΣΔADC (output rate: 3.8sps~31.25ksps, 90nVrms @15sps) Multi-Function Comparator for 16 level LVD, touch keys circuit and R/C sensor measurement 1% high speed (2M/4M/8MHz) RC Oscillator & low power low speed (11kHz) RC Oscillator Support 32.768kHz external Crystal Oscillator driver 16 bits PWM: 2*8 bits PWM, 8+8 PWM Support 2.75V Low voltage built-in EPROM (LVBIE) 64 word Max. 4x32 LCD driver Support SPI/I2C/EUART interface


Model No. ADCI (HG)

ADCII (LG)

Program Memory (word)

Data Memory (byte)

Built-in EPROM (word)

Touch Key OPAMP TPS RTC I/O LCD

Segment PWM Serial Interface Pin

HY13P52* 4-CH - 2k 128 64,LV 4-CH - Y Y 12xIO 4x12 2-CH - LQFP 48

HY13P53 7-CH - 4k 256 64,LV 8-CH - Y Y 17xIO 4x20 2-CH - LQFP 64

HY13P56 7-CH - 4k 256 64,LV 8-CH - Y Y 17xIO 4x32 2-CH - LQFP 64




09 09

Mixed Sig

nal Microcontroller

HY13P/HY16F Series

Operation voltage: 2.2V~3.6V Temperature range: -40℃~+85℃ 24-bit ultra low noise ΣΔADC (output rate: 10sps~10ksps, 65nVrms @10sps) Multi-Function Comparator for 16 level LVD, touch key circuit and R/C sensor measurement. Built-in OPAMP, DAC, Charge Pump, hardware RTC 1% high speed (2M/4MHz/10MHz/20MHz) RC Oscillator & low power low speed (32kHz) RC

Oscillator Support 32.768kHz & 1M~20M external Crystal Oscillator driver 16 bits PWM: 2*8 bits PWM, 8+8 PWM Support 32 bits SPI/I2C/EUART interface

Main Features of HY16F Series

Model No. 24-bΣ△ADC

Flash (byte)

SRAM (byte)

Touch Key OPAMP DAC TPS RTC I/O PWM Serial

Interfacechange Pump LCD Pin

HY16F184 4-CH 16K 2k 4-CH 1 8bits Y 1 19 2-CHI2C

UART32bits SPI

N -LQFP 48 QFN 33


UART32bits SPI

N -LQFP 48 QFN 33


UART32bits SPI

Y - LQFP 48

HY16F196 8-CH 16K 2k 8-CH 1 8bits Y 1 21+22 4-CHI2C

UART32bits SPI

Y4x246x22

LQFP 64QFN 68


UART32bits SPI

Y4x266x24

LQFP 64QFN 68


UART32bits SPI

Y4x366X34

LQFP 100

HY16F Series (32-bit Flash Type)

Battery M

anagem

ent IC

10

Battery Management IC

Built-in high precision voltage detection circuit and delay circuit Low current consumption:

＊Operation mode < 6µA (VDD=3.9V) ＊Sleep mode < 0.1µA (VDD=2.0V)

Charger connected pin adopts high-withstand-voltage design (CS/OC pin absolute max. rating: 20V)

0V battery charge function: "Available" or "Unavailable" is optional Small package: SOT-23-6 Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free Product quality ensures customer production defect rate < 50ppm

Main Features of HY2110, HY2111 & HY2112 Series

Battery M

anagem

ent ICHY2110/HY2111/HY2112 Series

11

Model No.

Overcharge DetectionVoltage

Overcharge Release Voltage

Overdischarge DetectionVoltage

Overdischarge Release Voltage

Discharge Overcurrent

Detection Voltage

Charger Detection Voltage

0V BatteryCharge

FunctionOther Function

VCU VCR VDL VDR VDIP VCHA V0CH

HY2110-A 4.30V±0.05V 4.10V±0.05V 2.4V±0.1V 3.0V±0.1V 150mV±30mV -0.3V AvailablePower-down

function

HY2110-C 4.28V±0.05V 4.08V±0.05V 2.4V±0.1V 3.0V±0.1V 150mV±30mV -0.3V AvailablePower-down

function

HY2110-D 4.28V±0.05V 4.08V±0.05V 2.4V±0.1V 3.0V±0.1V 150mV±30mV -0.3V AvailableAuto

OverdischargeRecovery Function

Model No.






Detection Voltage

Charger Overcurrent

Detection Voltage

0V BatteryCharge

Function

Other Function

VCU VCR VDL VDR VDIP VCIP V0CH

HY2111-D 4.28V±0.025V 4.08V±0.05V 2.9V±0.08V 3.0V±0.08V 75mV±25mV -100mV±40mV AvailablePower-down

function

HY2111-E 4.28V±0.025V 4.08V±0.05V 2.4V±0.08V 2.5V±0.08V 150mV±25mV -100mV±40mV AvailablePower-down

function

HY2111-G 4.28V±0.025V 4.08V±0.05V 2.9V±0.08V 3.0V±0.08V 150mV±25mV -100mV±40mV AvailablePower-down

function

HY2111-H 4.28V±0.025V 4.08V±0.05V 2.9V±0.08V 3.0V±0.08V 200mV±25mV -100mV±40mV AvailablePower-down

function

HY2111-K 4.28V±0.025V 4.08V±0.05V 2.4V±0.08V 2.5V±0.08V 225mV±30mV -100mV±40mV Available

Auto OverdischargeRecovery Function

HY2111-N 4.28V±0.025V 4.08V±0.05V 2.9V±0.08V 3.0V±0.08V 150mV±25mV -100mV±40mV UnavailablePower-down

function

Model No.






Detection Voltage

Charger Overcurrent

Detection Voltage

0V BatteryCharge

Function

VCU VCR VDL VDR VDIP VCIP V0CH

HY2112-A 3.75V±0.025V 3.60V±0.05V 2.10V±0.05V 2.30V±0.05V 100mV±15mV -200mV±30mV Available

HY2112-B 3.75V±0.025V 3.60V±0.05V 2.10V±0.05V 2.30V±0.05V 150mV±15mV -200mV±30mV Available

HY2112-C 3.75V±0.025V 3.60V±0.05V 2.10V±0.05V 2.30V±0.05V 200mV±15mV -200mV±30mV Available

HY2112-E 3.90V±0.025V 3.75V±0.05V 2.10V±0.05V 2.30V±0.05V 200mV±15mV -200mV±30mV Available

HY2112-G 3.75V±0.025V 3.25V±0.05V 1.825V±0.05V 2.37V±0.05V 100mV±15mV -100mV±20mV Available

HY2112-H 3.65V±0.025V 3.45V±0.05V 2.50V±0.05V 3.00V±0.05V 150mV±15mV -250mV±50mV Available

One-Cell Li-ion/Polymer/LiFePO4 Battery Protection IC

Battery M

anagem

ent IC

12

Built-in high precision voltage detection circuit and delay circuit High precision charge/discharge overcurrent detection voltage is flexibly configurable Low current consumption:

Operation mode < 6µA (VDD=3.9V) / Sleep mode < 0.1µA (VDD=2.0V) Charger connected pin adopts high-withstand-voltage design (CS/OC pin absolute max.

rating:20V) Small package: SOT-23-6 and DFN 6 (1.8mm*2.0mm) Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free Product quality ensures customer production defect rate < 50ppm

Main Features of HY2113 Series

Model No.






Detection Voltage

Charger Overcurrent

Detection Voltage

Delay Time Code

Characteristic Code

VCU VCR VDL VDR VDIP VCIP - -

HY2113-A 4.280V±0.025V 4.080V±0.05V 2.30V±0.05V 2.30V±0.05V 125mV±15mV -100mV±20mV 1 A

HY2113-B 4.325V±0.025V 4.125V±0.05V 2.50V±0.05V 2.80V±0.05V 150mV±15mV -100mV±20mV 1 A

HY2113-C 4.275V±0.025V 4.075V±0.05V 2.30V±0.05V 2.30V±0.05V 150mV±15mV -100mV±20mV 1 A

HY2113-D 4.275V±0.025V 4.175V±0.05V 2.30V±0.05V 2.40V±0.05V 100mV±25mV -100mV±20mV 1 A

HY2113-E 4.300V±0.025V 4.100V±0.05V 2.30V±0.05V 2.30V±0.05V 250mV±15mV -100mV±20mV 1 B

HY2113-F 4.250V±0.025V 4.050V±0.05V 2.50V±0.05V 2.80V±0.05V 200mV±25mV -100mV±20mV 2 B

HY2113-G 4.280V±0.025V 4.080V±0.05V 3.00V±0.05V 3.00V±0.05V 75mV±15mV -100mV±20mV 3 A

One-Cell Li-ion/Polymer Battery Protection

Battery M

anagem

ent IC

13

Delay Time Code

OverchargeDelay Time

OverdischargeDelay Time

Discharge OvercurrentDelay Time

Charge OvercurrentDelay Time

Short Circuit Delay Time

TOC TOD TDIP TCIP TSIP

1 1300ms 145ms 12ms 8ms 300μs

2 1000ms 20ms 12ms 8ms 300μs

3 1300ms 145ms 6ms 8ms 300μs

4 250ms 20ms 12ms 8ms 150μs

5 1000ms 145ms 24ms 16ms 300μs

6 1000ms 145ms 12ms 8ms 300μs

Delay Time Code ( Time Parameter Options )

Characteristic Code (Other Function Options)

HY2113 Series

Characteristic Code 0 V Battery Charge Function Power-down Function/ Auto Overdischarge Recovery Function

A Available With power-down Function

B Available With auto overdischarge recovery function

C Unavailable With auto overdischarge recovery function

Model No.






Detection Voltage

Charger Overcurrent

Detection Voltage

Delay Time Code

Characteristic Code


HY2113-H 4.280V±0.025V4.280V+0.025V4.280V - 0.050V

2.80V±0.05V 2.80V±0.05V 50mV±25mV -50mV±20mV 3 A

HY2113-I 4.190V±0.025V4.190V+0.025V4.190V - 0.050V

2.70V±0.05V 3.00V±0.05V 100mV±15mV -40mV±20mV 2 C

HY2113-J 4.275V±0.025V 4.075V±0.05V 2.80V±0.05V 2.80V±0.05V 150mV±25mV -100mV±20mV 1 B

HY2113-K 4.250V±0.025V 4.190V±0.05V 2.80V±0.05V 3.00V±0.05V 150mV±15mV -100mV±20mV 5 B

HY2113-L 4.200V±0.025V4.200V+0.025V4.200V - 0.050V

2.50V±0.05V 2.50V±0.05V 150mV±25mV -100mV±20mV 1 A

HY2113-M 4.280V±0.025V4.280V+0.025V4.280V - 0.050V

2.80V±0.05V 2.80V±0.05V 250mV±15mV -100mV±20mV 1 A/B

HY2113-N 4.380V±0.025V 4.280V±0.05V 2.60V±0.05V 2.80V±0.05V 150mV±25mV -175mV±25mV 4 A/B

HY2113-O 4.400V±0.025V 4.200V±0.05V 2.80V±0.05V 3.00V±0.05V 150mV±15mV -200mV±30mV 1 A/B/C

HY2113-P 4.250V±0.025V 4.190V±0.05V 2.50V±0.05V 3.00V±0.05V 150mV±25mV -100mV±20mV 5 B

HY2113-R 4.280V±0.025V 4.130V±0.05V 2.80V±0.05V 3.10V±0.05V 100mV±15mV -100mV±20mV 1 A

HY2113-S 4.275V±0.025V 4.075V±0.05V 2.80V±0.05V 3.00V±0.05V 150mV±15mV -100mV±20mV 1 B

Battery M

anagem

ent IC

14

Built-in high precision voltage detection circuit and delay circuit High precision charge/discharge overcurrent detection voltage is flexibly configurable Low current consumption:



0V battery charge function:“Available＂or“Unavailable＂is optional Auto overdischarge recovery function“Yes＂or“No＂is selectable Small package: DFN 6 (1.8mm*2.0mm) & SOT-23-6 Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free Product quality ensures customer production defect rate < 50ppm


Battery M

anagem

ent IC

15

HY2116 Series

Model No.






Detection Voltage

Charger Overcurrent

Detection Voltage

Delay Time Code

Characteristic Code


HY2116-A 4.280V±0.025V 4.100V±0.05V 2.40V±0.05V 2.50V±0.05V 180mV±10mV -225mV±50mV 6 B


HY2116-C 4.280V±0.025V 4.100V±0.05V 2.30V±0.05V 2.50V±0.05V 150mV±10mV -225mV±50mV 6 B

HY2116-D 4.275V±0.025V 4.175V±0.05V 3.00V±0.05V 3.20V±0.05V 150mV±10mV -200mV±30mV 6 B

HY2116-O 4.425V±0.025V 4.225V±0.05V 2.50V±0.05V 2.50V±0.05V 150mV±10mV -200mV±50mV 6 A

HY2116-H 4.420V±0.025V 4.235V±0.05V 2.50V±0.05V 2.70V±0.05V 200mV±10mV -225mV±50mV 2 B

One-Cell Li-ion/Polymer Battery Protection IC

Delay Time Code







1 1300ms 145ms 12ms 8ms 300μs

2 1000ms 20ms 12ms 8ms 300μs

3 1300ms 145ms 6ms 8ms 300μs

4 250ms 20ms 12ms 8ms 150μs

5 1000ms 145ms 24ms 16ms 300μs

6 1000ms 145ms 12ms 8ms 300μs



Characteristic Code 0V Battery Charge Function Power-down Function/ Auto Overdischarge Recovery Function




Battery M

anagem

ent IC

16

Provide high precision overcurrent detection when used with current sense resistance Built-in high precision voltage detection circuit and delay circuit High precision charge/discharge overcurrent detection voltage is flexibly configurable Low current consumption:



0V battery charge function:“Available＂or“Unavailable＂is optional Auto overdischarge recovery function“Yes＂or“No＂is selectable Tiny package: DFN 6 (1.4mm*1.4mm) & SOT-23-6 Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free


Battery M

anagem

ent IC

17

HY2115 Series

Model No.





Discharge Overcurrent Detection Voltage

Charger Overcurrent Detection Voltage

Delay Time Code

Characteristic Code


HY2115-AC 4.405V±0.02V4.405V+0.02V4.405V -0.03V

2.4V±0.035V 2.4V±0.035V 80mV±5.0mV -50mV±5.0mV 9 D

HY2115-BC 4.405V±0.02V4.405V+0.02V4.405V -0.03V

2.4V±0.035V 2.4V±0.035V 32mV±4.8mV -20mV±3.0mV 9 D

HY2115-CC 4.425V±0.02V4.425V+0.02V4.425V -0.03V

2.4V±0.035V 2.4V±0.035V 34mV±5.0mV -22mV±3.0mV 9 D

HY2115-DC 4.435V±0.02V4.435V+0.02V4.435V -0.03V

2.4V±0.035V 2.4V±0.035V 28mV±4.2mV -28mV±4.2mV 9 D

HY2115-LB 4.280V±0.02V4.280V+0.02V4.280V -0.03V

2.8V±0.035V 2.8V±0.035V 42mV±6.0mV -50mV±6.0mV 9 D

HY2115-MC 4.280V±0.02V4.280V+0.02V4.280V -0.03V

2.4V±0.035V 2.4V±0.035V 42mV±6.0mV -30mV±4.5mV 9 D

HY2115-NB 4.250V±0.02V4.250V+0.02V4.250V -0.03V

2.8V±0.035V 2.8V±0.035V 42mV±6.0mV -50mV±6.0mV 9 D

One-Cell Li-ion/Polymer Battery Protection IC

Delay Time Code





Short CircuitDelay Time


9 1040ms 120ms 8ms 8ms 300μs



Characteristic Code 0 V Battery Charge Function Power-down Function/ Auto Overdischarge Recovery Function

D Unavailable With power-down Function

Battery M

anagem

ent IC

18

Provide high precision short current detection when used with current sense resistance Provide high precision over-current detection when used with current sense resistance Built-in high precision voltage detection circuit and delay circuit High precision charge/discharge over-current detection voltage is flexibly configurable Low current consumption:

＊Operation mode < 8µA (VDD=3.9V）＊Sleep mode < 0.1µA (VDD=2.0V）

Charger connected pin adopts high-withstand-voltage design （CS/OC pin absolute max. rating: 20V)

0V battery charge function:“Unavailable＂&“Available＂ With auto over-discharge recovery function:“Yes＂or“No＂ is selectable Tiny package: DFN 6 (1.4mm*1.4mm) Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free


Battery M

anagem

ent IC

19

HY2118 Series

Model No.







Delay Time Code

Characteristic Code


HY2118-AC 4.425V±0.02V4.425V+0.02V4.425V -0.03V

2.4V±0.035V 2.4V±0.035V 34mV±5.0mV -22mV±3.3mV 2 J

HY2118-BC 4.280V±0.02V4.280V+0.02V4.280V -0.03V

2.4V±0.035V 2.4V±0.035V 32mV±4.8mV -30mV±4.5mV 2 J

HY2118-CC 4.425V±0.02V4.425V+0.02V4.425V -0.03V

2.8V±0.035V 2.8V±0.035V 40mV±5.0mV -30mV±4.5mV 2 J

HY2118-DC 4.445V±0.02V4.445V+0.02V4.445V -0.03V

2.4V±0.035V 2.4V±0.035V 30mV±4.5mV -20mV±3.0mV 2 J

1- Cell Lithium-ion/Lithium Polymer Battery PacksProtection IC

Delay Time CodeOverchargeDelay Time

Overdischarge Delay Time





2 1.0s 20ms 12ms 16ms 250μs



Characteristic Code 0V Battery Charge Function Power-down Function/ Auto Overdischarge Recovery Function

J Unavailable With power-down Function

Battery M

anagem

ent IC

20

Model No.







0V Battery Charge Function

Delay Time Code

Characteristic Code

VCUn VCRn VDLn VDRn VDIP VCIP V0CH - -

HY2120-A 4.35V±0.025V 4.15V±0.05V 2.30V±0.08V 3.00V±0.1V 300mV±30mV -210mV±30mV available 1 A

HY2120-B 4.35V±0.025V 4.15V±0.05V 2.30V±0.08V 3.00V±0.1V 200mV±30mV -210mV±30mV available 1 A

HY2120-C 4.28V±0.025V 4.08V±0.05V 2.90V±0.08V 3.00V±0.1V 200mV±30mV -210mV±30mV available 1 A

HY2120-D 4.28V±0.025V 4.08V±0.05V 2.25V±0.08V 2.95V±0.1V 200mV±30mV -210mV±30mV available 1 A

HY2120-E 4.28V±0.025V 4.08V±0.05V 2.25V±0.08V 2.95V±0.1V 150mV±10mV -210mV±30mV available 1 A

HY2120-F 4.30V±0.025V 4.10V±0.05V 2.90V±0.08V 3.00V±0.1V 200mV±30mV -210mV±30mV available 1 A

HY2120-G 4.28V±0.025V 4.08V±0.05V 3.10V±0.08V 3.20V±0.1V 200mV±30mV -210mV±30mV available 1 A

HY2120-H 4.38V±0.025V 4.18V±0.05V 2.40V±0.08V 2.50V±0.1V 200mV±30mV -210mV±30mV available 1 B

HY2120-L 4.25V±0.025V 4.05V±0.05V 2.80V±0.08V 3.00V±0.1V 200mV±30mV -210mV±30mV available 1 A

HY2120-M 4.45V±0.025V 4.25V±0.05V 2.25V±0.08V 2.95V±0.1V 200mV±30mV -210mV±30mV available 1 A

HY2120-N 4.28V±0.025V 4.08V±0.05V 2.80V±0.08V 3.00V±0.1V 200mV±30mV -210mV±30mV available 1 A

Two-Cell Li-ion/Polymer/LiFePO4 Battery Protection IC



Charger connected pin adopts high-withstand-voltage design (CS/OC pin absolute max. rating: 33V) 0V battery charge function:“Available＂or“Unavailable＂is optional Small package: SOT-23-6 Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free

Main Features of HY2120 & HY2122 Series

Battery M

anagem

ent IC

21

HY2120/HY2122 Series

Model No.






Detection Voltage

Charger Overcurrent

Detection Voltage

Delay Time Code

Characteristic Code

VCUn VCRn VDLn VDRn VDIP VCIP - -

HY2122-A 3.65V±0.025V 3.45V±0.05V 2.00V±0.08V 2.50V±0.1V 200mV±30mV -200mV±30mV 1 A

HY2122-A 3.65V±0.025V 3.45V±0.05V 2.00V±0.08V 2.50V±0.1V 200mV±30mV -200mV±30mV 1 B


HY2122-E 3.95V±0.025V 3.50V±0.05V 2.20V±0.08V 2.50V±0.1V 200mV±30mV -200mV±30mV 1 A


Characteristic Code 0V Battery Charge Function Power-down Function/

Auto Overdischarge Recovery Function




Delay Time Code







1 1000ms 110ms 10ms 7ms 250μs


Battery M

anagem

ent IC

22


＊Operation mode < 3.5µA (VDD=3.2V) ＊Sleep mode < 0.5µA (VDD=2.0V)

Small package: SOT-23-6 package Wide operation temperature range: -40℃~+85℃ All products are in Green packages: Pb & Halogen-free


Battery M

anagem

ent IC

23


Model No.Overcharge Detection Voltage Overcharge Release Voltage Delay Time Code Characteristic Code

VCU VCR - -

HY2212-A 3.60V±0.025V3.60V+0.025V3.60V -0.035V

3 B

HY2212-B 3.60V±0.025V 3.59V±0.035V 3 A

HY2213-A 4.20V±0.025V4.20V+0.025V4.20V -0.035V

3 B

HY2213-B 4.20V±0.025V 4.19V±0.035V 3 A

HY2213-C 4.18V±0.025V4.18V+0.025V4.18V -0.035V

3 A

One-Cell Li-ion/Polymer Battery Charge Balance IC

Delay Time CodeOvercharge Delay Time

TOC

3 250ms



Characteristic Code OUT Effective Operation

A N-MOSFET balance control: OUT output status L H Effective

B P-MOSFET balance control: OUT output status H L Effective

Battery M

anagem

ent IC

24

Model No.Overcharge Detection

VoltageOvercharge Release

VoltageOvercharge

Detection Delay Delay Time Code Characteristic Code

VCU VCR TOC - -

HY2215-B 4.20V±0.025V 4.19V±0.035V 250ms 3 A

HY2215-C 4.18V±0.025V4.18V+0.025V4.18V -0.035V

250ms 3 A

Model No.Overcharge Detection

VoltageOvercharge Release

VoltageOvercharge

Detection Delay Delay Time Code Characteristic Code

VCU VCR TOC - -

HY2216-B 3.60V±0.025V 3.59V±0.035V 250ms 3 A

One-Cell Li-ion/Polymer Charge Balance IC


Characteristic Code OUT Effective Operation

A Balance control NPN-BJT; OUT output status LèH effective


＊Operation mode < 3.5µA (VDD=3.9V) ＊Sleep mode < 0.5µA (VDD=2.0V)

Small package: SOT-23-6 package Wide operation temperature range:

-40℃~+85℃ All products are in Green packages:

Pb & Halogen-free


Battery M

anagem

ent IC

25


Used as stand–alone battery gauge for single Li+ cell battery applications ＊Integrate dual 16-bit ADCs for precision voltage, current, and temperature measurements ＊Use a low cost and low value sense resistor with calibration for current measurement ＊Use integrated and external temperature sensors for temperature measurement

Integrate accurate battery capacity estimate system ＊Integrate GaugePackTM algorithm – mixed algorithm with coulomb counting, open circuit cell voltage measurement and cell characteristics ＊Compensate Rate, temperature, age and self–discharge effects automatically ＊Require no fully battery charge-to-discharge or discharge-to-charge recycling for capacity learning process ＊Backup specific battery capacity information to Nonvolatile (NV) flash memory automatically

Feature programmable protection alerts ＊Protections for voltage, current, and temperature faults ＊Provide pin alert for voltage, current, and temperature protection

Backup battery lifetime data to Nonvolatile (NV) flash memory automatically Provide 96 bytes Nonvolatile (NV) user scratch pad flash memory


Model No. Cell No Protection Interface Authentication User Flash (Bytes) Package

HY4145 1 JEITA I2C/1-Wire SHA-1 96 DFN 12

Single Cell Li+ Battery Gauge IC with Protection IC

Battery M

anagem

ent IC

26

Used as stand–alone battery gauge for 1 to 3 Li+ Cell battery applications ＊Integrate dual 16-bit ADCs for precision voltage, current, and temperature measurements ＊Use a low cost and low value sense resistor with calibration for current measurement ＊Use integrated and external temperature sensors for temperature measurement

Integrate accurate battery capacity estimate system ＊Integrate GaugePackTM algorithm – mixed algorithm with coulomb counting, open circuit cell voltage measurement and cell characteristics ＊Compensate rate, temperature, age and self–discharge effects automatically ＊Require no fully battery charge-to-discharge or Discharge-to-charge recycling for capacity learning process ＊Backup specific battery capacity information to Nonvolatile (NV) Flash memory automatically

Support LEDs for capacityindication Feature programmable protection alerts

＊Protections for voltage, current, and temperature faults ＊Provide pin alert for voltage, current, and temperature protection

Backup battery lifetime data to Nonvolatile (NV) Flash memory automatically Provide 96 bytes Nonvolatile (NV)user scratch pad Flash memory



HY4222 1 JEITA 2-Wire ( I2C) SHA-1 96 TSSOP 20

1-to-3 Cell Li Metal Battery Gauge IC

Battery M

anagem

ent IC

27


Used as stand–alone battery gauge for 1 to 3 Li+ Cell battery applications ＊Integrate dual 16-bit ADCs for precision voltage, current, and temperature measurements ＊Use a low cost and low value sense resistor with calibration for current measurement ＊Use integrated and external temperature sensors for temperature measurement

Integrate accurate battery capacity estimate system ＊Integrate GaugePackTM algorithm – mixed algorithm with coulomb counting, open circuit cell voltage measurement and cell characteristics ＊Compensate rate, temperature, age and self–discharge effects automatically ＊Require no fully battery charge-to-discharge or discharge-to-charge recycling for capacity learning process ＊Backup specific battery capacity information to Nonvolatile (NV) Flash memory automatically

Feature programmable battery capacity indications ＊Provide 3 or 4 LEDs for capacity indications

Feature programmable protection alerts ＊Protections for voltage, current, and temperature faults ＊Provide pin alert for voltage, current, and temperature protection

Backup battery lifetime data to Nonvolatile (NV) Flash memory automatically Provide 96 bytes Nonvolatile (NV) user scratch Pad Flash memory



HY4231 1 JEITA 2-Wire (SMB) SHA-1 96 TSSOP 20

1-to-3 Cell Li+ Battery Gauge IC with Direct Connection

28

Others

Others

Operation voltage: 2.4V~3.6V Temperature range: -40℃~+85℃ Built-in VDDA regulator, 2.4V, 2.7V, 3.0V and 3.3V voltage selection Built-in temperature sensor with ±2℃ accuracy Up to 4 analog channels 24-bit fully differential ΣΔ Analog-to-Digital Converter (ADC) ＊Lowest RMS noise level: 50nV ＊Output rate, 10, 80, 640 and 2560SPS selection ＊50/60Hz signal rejection ＊Reference input buffer Operation current: ＊950µA @ gain=64, 128 ＊300µA @ gain=1, 2 or 4 Built-in PGA, x1, x2, x4… x128 gain amplification

Main Features of HY310x Series (Σ△ADC)

Model No. Architecture Input

ChannelsENOB (Bits)

RMS Noise System Clock Sample

Rate (Max)

Built-in Temp. Sensor

DC Offset Setting

Interface Package

HY3102 Sigma-Delta 2 2150nV

(10SPS)Int. 320kHz 2560SPS YES 4 bits SPI SSOP 16


(10SPS)Int. 320kHz

Ext.4.9152MHz2560SPS YES 4 bits SPI SSOP 16

Data Converters

29

Others

HY310x/HY311x Series

Operation voltage: 2.4V~3.6V Temperature range: -40℃~+85℃ Built-in VDDA regulator, 2.4V, 2.7V, 3.0V and 3.3V voltage selection Built-in Rail-to-Rail OPAMP Operation current: ＊Full speed: 1050µA (OPAMP excluded) ＊Sleep current: 1µA 24-bit fully differential ΣΔ Analog-to-Digital Converter (ADC)＊Built-in PGA, x1, x2, x4…x128 gain amplification ＊Lowest RMS noise level: 100nVrms ＊Output rate up to 7680SPS ＊50/60Hz signal rejection ＊Symmetric analog input network ＊Up to 4 analog channels ＊Built-in 4-bit DC bias voltage ＊Built-in high impedance input buffer at reference end


Model No. Architecture Input

ChannelsENOB (Bits)

RMS Noise System Clock Sample

Rate (Max)

Built-in Temp. Sensor

DC Offset Setting

Interface Package


(10SPS)Int. 327kHz/1MHz 7680SPS NO 4 bits I2C MSOP 10


(10SPS)Int. 327kHz/1MHz

Ext.4.9152MHz7680SPS YES 4 bits I2C SSOP 16

30

Others

High resolution and high speed ΣΔADC to achieve digital T-RMS, peak hold & inrush current functions Flexible auto range multifunctional network for reference resistor ratio self-calibration Programmable capacitors array for ACV bandwidth compensation Programmable ±constant voltage/current source Dual multifunctional comparators with programmable comparison voltage for continuity test,

capacitance and frequency measurements 3 sets of 24-bit programmable counters for frequency and duty cycle measurement

Analog Front End for DMM

Model No.

PA Network

PB Channel

High Precision

High Speed

Built-inOPA

Built-in Cap. Cap. T-RMS

BandwidthInrush

CurrentPeak Hold Counts Serial

Port Package

ADC ADC Array

HY3130 10 9 1 1 2 Y 50mF 8KHz Y 0.1ms 5000 SPI LQFP 48

HY3131 10 9 1 2 2 Y 50mF 8KHz Y 0.1ms 50000 SPI LQFP 48


31

Others

HY313x/HY2613 Series

Operation voltage: 2.4V~5.5V Temperature range: -40℃~+85℃ Max. 4x36 segments or 4x32 segments (+LED Back Light) 1/2 or 1/3 Bias, 1/4 Duty support High side or low side driver (Constant Adjust support) Built-in voltage pump has 8 output voltage LED Back Light Function, constant current:

15mA/4.2V IQR function output (support time base and WDT NMI) 2-wire I2C serial communication interface (SCL,SDA) Low power consumption, 7.5µA at

operation mode


LCD Controller and Driver

Model No. LCD Segment

LED Driver

VLCD Charge Pump LCD Mode IRQ Serial

Interface Package

HY2613B 4X36 - - Low Side - I2C LQFP 48/TSSOP 48

HY2613C 4X32 Yes Yes High Side Yes I2C LQFP 48/TSSOP 48

32

Others

Mutual capacitive sensing techniques: True multi-touch with up to 11 points of absolution X and Y coordinates 32-bit microcontroller for algorithm execution Supports precise16-bit ADCs for input signal collection Supports auto-calibration function to prevent environmental variations Supports up to 28 transmit lines (TXs) and 16 receive lines (RXs) Supports up to 10.1＂ touch screen Supports more than 100Hz high report rate Optional I2C/SPI interfaces supported Supports wide voltage operation range:2.6V to 3.6V Supports direct communication connect: 1.8V/AVDD IOVCC Capable of driving single channel (transmit/receive) resistance: up to30K Ω Capable of supporting single channel (transmit/receive) capacitance: 60 pF Optimal sensing mutual capacitor: 1pF~4pF Immune to RF and power noise interferences Low power modes supported: active, monitor, and sleep Operating temperature range: -20℃~+85℃ Support Pb-free package

HY46xx accommodate a wide range of applications with a set of buttons up to a 2D touch sensing device, their typical applications as listed below.

Mobile phones, smart phones Tablet PC Navigation systems, GPS Game consoles Car applications POS (Point of Sales) devices Portable MP3 and MP4 media players Digital cameras

True Multi-Touch Capacitive Touch Panel Controller

Main Features of HY461x Series

Typical Applications

33

Others

HY461x Series

HY46xx System Architecture Diagram

Model No.Panel Package

Touch Panel Recommended PitchTX RX Type Pin Size

HY4613 21 12 QFN6*6 48 0.75-P0.4 ≤5.0" ~5mm

HY4614 28 16 QFN8*8 68 0.75-P0.4 ≤10.1" ~6mm

Technical Support

34

Main Tool ICE Board Control Board

Accessories Power Supply DC9V USB A/B

Supported Model HY10P Series

Main Tool ICE Board Target Board Control Board

Accessories Power Supply DC9V USB A/B


Main Tool ICE Board Target Board Control Board

Accessories Power Supply DC9V USB A/BProgramming line 6P/2.0 PS2 6P


Technical SupportDevelopment Kit

HY10S40-DK01

HY13S00-DK01

HY11S14-DK03/DK05

Technical Support

Development Kit

35

Main Tool ICE Board Control Board

Accessories Power Supply DC9V Programming line 6P/2.0 PS2 6P


Main Tool Target/Prototyping BoardUSB debug adapter (HY-Protool)

Accessories USB A/B Extenal line 8P/2.54 DVD ROM

Supported Model HY16F Series

HY12S65-DK03

HY16F00-DK02

36

Technical Support

Main Tool Programmer Board

Accessories Power Supply DC9V USB A/B Programming line 6P/2.0 Extenal line 8P/2.54

Supported Model HY11P SeriesHY12P Series

Writer Kit

HY10000-WK06


Accessories Power Supply DC9V USB A/B Programming line 6P/2.0

Supported Model HY10P SeriesHY13P Series

HY13S00-CM01


Accessories Power Supply DC5VUSB A/B Programming line 5Pin 2.54mm

Supported Model HY16F Series

HY16F00-WK01

37

Technical Support

Writer Kit/ENOB Kit

Main Tool Communication Board ENOB Board

Accessories USB A/B Extenal line 6P/2.54

Supported Model HY310x Series by HY3106

ENOB Kit

HY3106-AK01




HY3118-AK01




HY3131-AK01

Technical Support

Main Tool Communication Board HY11P24 ENOB Board


Supported Model HY11P Series by HY11P24

Main Tool Communication Board HY12P65 ENOB


Supported Model HY12P Series by HY12P65

Main Tool Communication BoardHY4145 Target Board

Accessories USB A/BExtenal line 3P/2.54

Supported Model HY4145

HY11P Series (HY11P24-AK01)

HY12P Series

HY4145-AK01

38

Technical Support

The product information listed in this selection guide is subject to change without further notice.

Please contect us for update infomation.

Distributor Information

www.hycontek.com

Taiwan5F., No.172, Sec.4, Chengde Rd., Shilin Dist., Taipei City 11167, TaiwanTEL：+886-2-2880 4288 FAX：+886-2-2880 4287E-mail：[email protected]

ChinaTerra Pines Building South Tower 1615, Tairan Six Rd.,Futian Dist., Shenzhen 518040, ChinaTEL：+86-755-8364-9119 FAX：+86-755-8364-7796

First edition : 2014/05

Documents

HYCON Product Selection Guide 2014