Disclaimer:
-
- It is customer’s responsibilities to inspect and test the product for suitability of the customer’s own use and purpose. The customer is responsible for appropriate, safe, legal use,
processing and handling of the product.
- To the best of our knowledge, the information contained herein is accurate and reliable as of the date of publication. We however do not assume any liability whatsoever for the
accuracy and completeness of the information contained herein.
- We make no warranties which extend beyond the description herein. Nothing herein shall constitute any implied warranty of merchantability or fitness for a particular purpose.
- No liability can be accepted in respect for the use of the product in conjunction with other materials. The information contained herein relates exclusively to the product when it is
not used in conjunction with any third party’s materials.
Rev. Jan 2018 valid until next revision
The applications specified for reference only.
INTRODUCTION
01
Our Production Capacity (As of 2018)
(PE / PP / PVC)
Total Capacity : 2,878 KTA
Polyolefin
Total : 1,912 (KTA)
PVC
Total : 966 (KTA)
HDPE 920
PP 720
LLDPE 120
LDPE 152
PVC Resin 850
PVC Compound 80
PVC Paste Resin 36
SCG Chemicals is one of the largest integrated petrochemical companies in Asia and a key industry leader.
We manufacture and supply a full range of petrochemical products ranging from upstream monomers to
downstream polymer including PE, PP, PVC, PS and MMA.
To better serve customers’ requirements, SCG Chemicals assign prime importance to development of new
technology and innovation for the creation of high value-added products and services (HVA).
Widely recognized for product quality as well as for excellent management and world-class operation
efficiency, SCG Chemicals has joint ventured with a number of the world’s leading chemical companies,
including the DOW Chemical Company, Mitsui Chemicals and Mitsubishi Rayon.
EL-Lene™ is a trademark of polyethylene resin, manufactured by utilizing the world class technology from
Mitsui Chemicals, Inc. of Japan. With the intention to serve the resin in various industries including general
purpose plastics. SCG Chemicals specifically designs EL-Lene™ to serve variety of worldwide customer’s
requirement.
Polyethylene Resin
03
HDPE ResinGeneral Film Application
EL-Lene™ HDPE produced by bimodal process, the cutting edge
technology developed by Mitsui Chemicals Inc. of Japan.
Remark: Film produced at TPE, 12 mircron and BUR 5:1
0.04 0.06
0.954 0.952
MD 620 ,TD 310 MD 910 , TD 380
MD 3 , TD 135MD 3 , TD 80
- High tensile strength
- Suitable for general
- High tensile strength and high productivity
- Film produced by high speed machine and
General purpose bag, Shopping bag, Roll-bag, Liner bag,
Industial bag, Garbage bag, PE-glove
MFR
(g/10min)
Density
(g/cm³)
Film Tensile Strength at
Break MD/TD
(kg/cm2)
Film Tear Strength
MD/TD (g)
Recommended
Application
Key Characteristic
H5604F F15Grade
purpose film wide lay flat(>25”)
consumer goods, for different production processes such as film,
With prudent production control and the use of premium quality
additives to ensure high quality of end products, EL-Lene™ HDPE
resin is an ideal for various applications, both industrial and
blow molding and monofilament.
04
HDPE ResinInjection Molding Application
14.0
0.956
280
12,500
29
- High processability
- Good impact resistance
- Food contact applicable
- General injection part
- Household product
- Bottle cap and closure
- Toy
MFR
(g/10min)
Density
(g/cm³)
Tensile Strength at Yield
(kg/cm2)
Flexural Modulus
(kg/cm2)
Notched Izod Impact @ 23°C
(J/m)
Recommended
Application
Key Characteristic
H5814JGrade
- Office article
05
HDPE ResinBlow Molding Application
0.70 0.40 0.30 0.40
0.965 0.964 0.960 0.955
15,000 15,000 13,000 12,000
147 245 98 98
24 24 100 300
- Milk bottle
- Fruit juice bottle
- Good processibility
- Odorless
- Excellent surface
appearance
- Good impact and
compressive
strength
- Drinking water
bottle
- Milk bottle
- Personal and
homecare bottle
- Milk bottle
- Lube oil bottle
- Chemical bottle
- Personal and
homecare bottle
- Lube oil bottle
MFR
(g/10min)
Density
(g/cm³)
Flexural Modulus
(kg/cm2)
Notched Izod Impact @23°C
ESCR
(hrs, F50)
Recommended
Application
Key Characteristic
H6670B H6430BM H6140B H5840BGrade
- Excellent stiffness
- Excellent stiffness
appearance
- Excellent ESCR
- Good surface
(J/m)
06
HDPE Resin
0.80
0.952
10,000
167
30
Net ,Rope,Tarpaulin ,Woven sack
- High tenacity
- Good processability
- Balance softness and mechanical strength
- Good weathering property
- Suitable for color mixing
- Food contact applicable
MFR
(g/10min)
Density
(g/cm³)
Flexural Modulus
(kg/cm2)
Notched Izod Impact @ 23°C
ESCR
(hrs, F50)
Recommended
Application
Key Characteristic
H5480SGrade
(J/m)
07
LLDPE ResinGeneral Film Application
EL-Lene™ LLDPE resin is linear low-density polyethylene
by a a technology developed
by BP Chemicals Co., Ltd. of England. Our LLDPE resin
MFR
(g/10min)
Density
(g/cm³)
Tensile Strength at
Break MD/TD
(kg/cm2)
Tear Strength*
MD/TD
(g)
Dart Drop
(g)*
Slip/Anti-Block
Recommended
Application
Key Characteristic
1.0 1.0 1.0
0.920 0.921 0.921
MD 380, TD 350 MD 380, TD 350
MD 145, TD 370
MD 470, TD 170
MD 145, TD 370 MD 145, TD 370
130130 130
YesNo Yes
- General purpose bag - General purpose bag
for vegetable or fruit
packaging
- General purpose bag
- High productivity and can
be blened well with HDPE
or LLDPE resin to improve
tear
- High productivity and can
be blened well with HDPE
or LLDPE resin to improve
tear
- High clarity water-quenced
- Good openability
Grade L2009FA L2009F L1810Fl
Remark: * Film produced at TPE, 38 micron, BUR 2:1
producedresin gas phase process,
offers
excellent properties and are mainly used for film applications.
film
- Water-quenced blown film
EL-Pro™ is a trademark of polypropylene resin produced by utilizing a modern technology recognized
worldwide from Mitsui Chemicals Inc. of Japan. Meticulous production control and the careful selection of
additives ensure that each type of EL-Pro™ possess outstanding properties. We also provide a cover range
of Polypropylene resin including PP Homopolymer, PP Block Copolymer and PP Random Copolymer resin.
Polypropylene Resin
09
PP Homopolymer ResinGeneral Film Application
EL-Pro™ PP Homopolymer resin have high isotactic
index that provides good stiffness ideal for household
articles and food packaging films.
10.0
MD 280 , TD 260
MD 850 , TD770
17,000
Yes
- Water-quenched blown film for general
purpose packaging and food packaging
- Good optical
- Good openability
MD 850 , TD770
10.0
MD 280 , TD 260
17,000
No
- Water-quenched blown film for thick
packaging such as food packaging and
display bag (>100 micron thickness)
- Excellent optical
MFR
(g/10min)
Tensile Strength at Break
MD/TD
(kg/cm2)
Elongation at break
(%)
Flexural Modulus
(kg/cm2)
Slip/Antiblock
Recommended
Application
Key Characteristic
P600F P602FGrade
10
PP Homopolymer ResinInjection Molding Application
3.5 12.0
320 320 320 420
13,500 14,500 15,500 17,000
41 37 34 34
- Furniture
- Fruit basket
- Household product
- Toy
- Office accessory
- Food container
- Infant article
- Furniture
- Fruit basket
- Household product
- Toy
- Office accessory
- Food container
- Infant article
- Furniture
- Fruit basket
- Household product
- Toy
- Office accessory
- Food container
- Infant article
- Food container
- Toy
- Household product
12.0MFR
(g/10min)
Tensile Strength at Yield
(kg/cm2)
Flexural Modulus
(kg/cm2)
Notched Izod Impact @23°C
Recommended
Application
Key Characteristic
12.0
- Good impact
resistance
- Odorless
- Food contact
applicable
- High processibility
- Odorless
- Good stiffness
- Food contact
applicable
- High processibility
- Odorless
- Good stiffness
- Food contact
applicable
- Good clarity and gloss
- High stiffness
- High processibility
- Odorless
- Food contact
applicable
P403J P700J P701JGrade P702J
(J/m)
11
PP Homopolymer ResinFlat Yarn Application
3.5
320 320
13,500 13,500
40 41
- Small woven sack
- Straw
- Rope
- Woven sack (Jumbo bag/ Industrial
woven sack)
- Tarpaulin
- Straw
- Rope
- Sheet and thermoforming
MFR
(g/10min)
Tensile Strength at Yield
(kg/cm2)
Flexural Modulus
(kg/cm2)
Notched Izod Impact @23°C
Recommended
Application
Key Characteristic
2.4
- High productivity
- High mechanical properties
- Less water-carry over
- Food contact applicable
- High mechanical properties with balance
softness
- Good processability
- Food contact applicable
P400S P401SGrade
(J/m)
12
PP Block Copolymer ResinInjection Molding Application
EL-Pro™ PP Block Copolymer resin offers excellent
impact resistance property ideal for injection molding
products that demand high impact strength, and
odorless, recommended for automotive & home
appliance part, and industrial use.
5.0 5.0 5.0 10.0 10.0
270 270 300 280 250
12,500 12,500 16,500 12,000 12,000
118 118 108 98 NB
- High impact
strength
- Good stiffness
- Food contact
applicable
- High impact
strength
- Good stiffness
- Good UV
resistance
- Very high
stiffness
- Good impact
strength
- Good
dimensional
stability
- High heat
resistance
- UV resistance
and contain
anti-static
agent
- High impact
strength
- Good stiffness
- Good
processibility
- Food contact
applicable
- Excellent
impact
strength
- High stiffness
- Good
processibility
- Pail
- Crate
- Industrial use
- Automotive
- Home
appliance part
- Furniture
- Container
- Pail
- Crate
- Industrial use
- Automotive
- Home
appliance part
- Any part that
requires
outdoor use
- Returnable
transport
packaging
such as pallet,
crate, and
container
- Automotive
and home
appliance part
- Any part that
requires
outdoor use
- Industrial use
- Automotive
- Home
appliance part
- Furniture
- Toy
- Pail
- Crate
- Industrial use
- Luggage
- Container
- Furniture
- Automotive
- home
appliance
part
MFR
(g/10min)
Tensile Strength at Yield
(kg/cm2)
Flexural Modulus
(kg/cm2)
Notched Izod Impact
@23°C
Key Characteristic
Recommended
Application
Grade P440J P441JU P483JU P640J
10.0
280
14,000
98
- Good
flowability
- Excellent
stiffness
- High impact
strength
- Mechanical
property
balance
- Contain UV
stabilizer and
anti-static
agent
- Industrial use
- Automotive
- Home
appliance part
P642J P667J
- Pail
- Crate
- Industrial use
- Luggage
- Container
- Furniture
- Automotive
- home
appliance
part
(J/m)
13
PP Block Copolymer ResinInjection Molding Application
43.0 40.0
290 260 295 300
12,500 12,000 14,500 13,000
70 70 74 98
- Automotive
- Home appliance
part
- Complicated
industrial part
- Any part that
requires outdoor
use
- Washing machine
part such as tub,
base, panel
- Industrial use
- Home appliance
part
- Any part that
requires outdoor
use
- Washing machine
part such as tub,
base, panel
- Industrial use
- Home appliance
part
- Refrigerator part
MFR
(g/10min)
Tensile Strength at Yield
(kg/cm2)
Flexural Modulus
(kg/cm2)
Notched Izod Impact
@23°C
Recommended
Application
Key Characteristic
40.0 10.0
- High impact
strength
- Good stiffness
- Good processibility
- Food contact
applicable
27.0
290
12,500
78
- Automotive
- Home appliance
part
- Complicated
industrial part
- Any part that
requires outdoor
use
- High impact
strength
- Good stiffness
- Good processibility
- Food contact
applicable
- High stiffness
- Good impact
strength
- Good processibility
- Good UV
resistance
- Very High stiffness
with good impact
balance
- Dimensional
stability
- Battery case
- Automotive
- Home appliance
part
- Industrial use
- High stiffness with
good impact
balance
- Dimensional
stability
- Good processibility
- Good UV
resistance
P840J P841J P842J P722JOGrade P740J
(J/m)
14
12.0
300
12,000
65
- Clear food container
- Clear household product
- Article that requires high
transparency
MFR
(g/10min)
Tensile Strength at Yield
(kg/cm2)
Flexural Modulus
(kg/cm2)
Notched Izod Impact @23°C
Recommended
Application
Key Characteristic
- High gloss
- High clarity
- Food contact applicable
- Good impact resistance
PP Random Copolymer ResinInjection Molding Application
EL-Pro™ PP Random Copolymer resin
has the qualities needed for injection molding
products that require a high degree of
transparency and beautiful surface.
P750J
20.0
320
12,500
60
- Clear food container
- Clear large size container
- Household product
- Article that requires high
transparency
- High gloss
- High clarity
- High brightness
- Odorless
- Good processibility
- Food contact applicable
P851JOGrade
(J/m)
PP For Coating Application
15
245
8,900
130
- Coated woven bag
- BOPP film
- Paper laminated woven bag
MFR
(g/10min)
Tensile Strength at Yield
(kg/cm2)
Flexural Modulus
(kg/cm2)
Vicat Temperature
(°C)
Recommended
Application
Key Characteristic
28.0
- Excellent adhesion
- Good processability
- Softness
- High gloss surface
- High impact strength
280
1,1000
140
- Tarpaulin
- PP woven bag
- BOPP and paper substrate
28.0
- Good processability
- Good adhesion on substrate
- Balance stiffness and impact
strength
P756CGrade P838C
SCG Chemicals offers a variety of PVC suspension resin manufactured by Thaiplastic and Chemicals Co., Ltd.
(TPC) with various molecular weight or “K Values” to serve as a raw material across a wide range of PVC
finished products.
Our products are produced from technologies developed by Mitsui Chemicals of Japan, INEOS Chlor Vinyls
Limited of UK. and Chisso Corporation of Japan.
We continuously work closely with our customers in product development to create new applications of
PVC and new resin that can satisfy specific needs, reduce cost, as well as enhance efficiency for the most
effectiveness of customers.
PVC Resin
General Grade PVC Resin Our PVC resin is produced by suspension polymerization
process, while powder and free-flowing resin blended
with other additives by using standard mixing
techniques. They are developed to serve a wide range of
usages especially for general propose products.
Remarks: Typical value only
58.0 58.0 61.0 65.9 65.7 71.0
0.57 0.57 0.57 0.55 0.56 0.49
<0.3 <0.3 <0.3 <0.3 <0.3 <0.3
<2 <2 <2 <2 <2 <2
>90 >90 >90 >90 >90 >90
<20 <20 <20 <20 <20 <20
- Floortile
- Fitting
- Rigid injection
product
- Adhesive
- Rigid sheet
packaging
- Stationery
- Furniture trim
- Construction
profile
- Bottle &
IC tube
- Rigid sheet
packaging
- Stationery
- Credit card
- Floor covering
- Sticker &
decorative
sheet
- Floortile
- Furniture trim
- Construction
profile
- Shrink film
- Flexible sheet
packaging
- Curtain
- Floor covering
- Furniture trim
- Shrink film
- Hose
- Electrical wire
& cable
- Shoes
- Toy
- Pipe
- Door/Window
& frame
- Construction
profile
- Flexible sheet
packaging
- Artificial leather
- Infatable toy
- Electrical tape
- Gasket
- Automotive part
- Hose
- Electrical wire
& cable
- Wire harness
K Value
(ISO 1628-2)
Apparent Bulk Density
(g/ml)
(ISO 60)
Volatile Matter
(%)
(ISO 1269)
Sieve Analysis,
Retained on 250 micron
(%)
(ASTM D1921)
Sieve Analysis,
Retained on 75 micron
(%)
(ASTM D1921)
Impurity and
Foreign Matter
(Specks/100sq)
(ISO/R-1265)
Recommend
Application
SF580 SG580 SG610 SG660 SP660 SG710Grade
17
18
Special Grade PVC ResinNon-Bisphenol A Series
Our Non-Bisphenol A Series has a good fish eye
property, initial coloration and thermal stability with
low contamination level.
Remarks: Typical value only
58.0 61.0 65.8 65.7 70.9
0.57
<0.3
<2
<10
<1 <1 <1<1 <1
- - ->3.0 x 1013 >3.0 x 1013
<10 <10 <10 <10
<2 <2 <2 <2
>90 >90 >90 >90 >90
<0.3 <0.3 <0.3 <0.3
0.57 0.55 0.56 0.49
K Value
(ISO 1628-2)
Apparent Bulk Density
(g/ml)
(ISO 60)
Volatile Matter
(%)
(ISO 1269)
Sieve Analysis,
Retained on 250 micron
(%)
(ASTM D1921)
Sieve Analysis,
Retained on 75 micron
(%)
(ASTM D1921)
Impurity and Foreign Matter
(Specks/100sq)
(ISO/R-1265)
Residual Vinyl Chloride
Monomer
(ppm)
(ASTM D3749)
Volume Resistivity
(Ohm-cm)
(Inhouse Method)
Recommend
Application
SG58J SG61J SG66J SP66J SG71JGrade
- Rigid sheet
packaging
- Credit card
- Blister pack
- Furniture trim
- Construction
profile
- Bottle & IC tube
- Shrink film
- Rigid sheet
packaging
- Credit card
- Blister pack
- Sticker &
decorative sheet
- Furniture trim
- Construction
profile
- Shrink film
- Shoes
- Toy
- Flexible sheet
packaging
- Sticker &
decorative sheet
- Curtain
- Furniture trim
- Shrink film
- Hose
- Wrap & cling film
- Electrical wire &
cable
- Shoes
- Toy
- Pipe
- Door/Window &
frame
- Construction
profile
- Flexible sheet
packaging
- Artificial leather
- Infatable toy
- Electrical tape
- Gasket
- Automotive part
- Hose
- Electrical wire &
cable
- Wire harness
58.0 65.8 71.3
0.57 0.53 0.49
<0.3 <0.3 <0.3
<2 <2 <2
<10 <10 <10
- >3.0x1013 >3.0x1013
- Rigid sheet packaging
- Credit card
- Blister pack
- Furniture trim
- Construction profile
- Bottle & IC tube
- Shrink film
- Flexible sheet packaging
- Sticker & decorative sheet
- Curtain
- Furniture trim
- Shrink film
- Hose
- Wrap & cling film
- Electrical wire & cable
- Flexible sheet packaging
- Artificial leather
- Infatable toy
- Electrical tape
- Gasket
- Automotive part
- Hose
- Electrical wire & cable
- Wire harness
K Value
(ISO 1628-2)
Apparent Bulk Density
(g/ml)
(ISO 60)
Volatile Matter
(%)
(ISO 1269)
Sieve Analysis,
Retained on 250 micron
(%)
(ASTM D1921)
>90 >90 >90
Sieve Analysis,
Retained on 75 micron
(%)
(ASTM D1921)
<5 <5 <5
Impurity and Foreign Matter
(Specks/100sq)
(ISO/R-1265)
<1 <1 <1
Residual Vinyl Chloride
Monomer
(ppm)
(ASTM D3749)
Fish Eye
(Point/150 cm2)
(Inhouse Method)
Volume Resistivity
(Ohm-cm)
(Inhouse Method)
Recommend Application
Special Grade PVC ResinZ Series
Our unique PVC resin Z Series has an extremely low fish
eye count, excellent initial coloration and thermal stability,
high degree of transparency with low contamination
levels.
SG58Z SG66Z SG71ZGrade
Remarks: Typical value only
19
20
Special Grade PVC ResinLow & High K Value Series
Our Low K Value has faster fusion behavior, high melt
flow index (MFI) with low contamination levels and our
High K Value has an excellent plasticizer absorption,
dry up abilities, high strength and elasticity, excellent
mechanical performance of finished articles.
50.3 70.3 76.5 84.9
0.59 0.48 0.47 0.48
< 0.3 < 0.3 < 0.3 < 0.3
< 2 < 2 < 2 < 2
> 90 > 90 > 90 > 90
<10 < 10 < 10 < 10
< 1 < 1 < 1 < 1
<10
- Floortile
- Fitting
- Rigid injection
product
- Adhesive
- Flexibe sheet packaging
- Gasket
- High strength and
thermal stability (wire &
cable, wire & harness
and electrical taper, etc.)
- High strength flexible sheet (matt, cover,
flexible sheet, packaging, artificial leather,
inflatable toy, etc.)
- High strength & abrasive resistance flexible
product (automotive part, hose, shoe, etc.)
- High strength and thermal stability (wire &
cable, wire harness and electrical tape, etc.)
- High eleasticity product (loop sandal, gear
knob, brush, etc.)
<10 <10 <10
- > 3.0 x 1013 > 3.0 x 1013 > 3.0 x 1013
K Value
(ISO 1628-2)
SG500 SG730 SG760 SG840Grade
Apparent Bulk Density
(g/ml)
(ISO 60)
Volatile Matter
(%)
(ISO 1269)
Sieve Analysis,
Retained on 250 micron
(%)
(ASTM D1921)
Sieve Analysis,
Retained on 75 micron
(%)
(ASTM D1921)
Impurity and Foreign Matter
(Specks/100sq)
(ISO/R-1265)
Residual Vinyl Chloride
Monomer
(ppm)
(ASTM D3749)
Fish Eye
(Point/150 cm2)
(Inhouse Method)
Volume Resistivity
(Ohm-cm)
(Inhouse Method)
Recommend
Application
Remarks: Typical value only
Shanghai
Guangzhou
Australia
Surabaya
Ho Chi Minh
Myanmar
Hanoi
Thailand
Overseas Offices & Contact Information
Head Office: SCG Plastics Co., Ltd.
1 Siam Cement Road, Bangsue, Bangkok,
Thailand 10800
Tel: +662 586 1111 Ext. 5897
Fax: +662 586 5514
Email: [email protected]
SOUTHEAST ASIA
PT. TPC Indo Plastic and Chemicals (Surabaya Office)
Lt.5, unit S 508-509, Kompleks Graha Festival Kav.3 Mayjend
Yono Soewoyo, Graha Family, Surabaya 60226
Tel. +62 319 900 120 56
Fax. +62 319 900 1204
CHINA
SCG Plastics Co., Ltd. (Hanoi Office)
SCT Co., Ltd. (Hanoi) Representative Office
196 Truong Chinh, Dong Da dist., Hanoi city
Tel. +84 439 744 354
Fax. +84 439 744 350
Viet-Thai Plastchem Co., Ltd.
An Phu Ward, Thuan An Town, Binh Duong, Vietnam
Tel. +84 650 374 0060
Fax. +84 650 374 0065
SCG Plastics Co., Ltd. (Ho Chi Minh Office)
10th Floor, An Phu Plaza 117-119 Ly Chinh
Thang P7, Q3 Ho Chi Minh City, Vietnam
Tel. +84 988 804 672
Fax. +84 829 612 76
TPC Vina Plastic and Chemicals Corporation Co., Ltd. (Ho Chi Minh Office)
U.901-9th Fl., Harbor View Tower, 35 Nguyen Hue Street District 1,
Hochiminh City, Vietnam
Tel. +84 838 234 730
Fax. +84 838 234 725
Chemtech Co., Ltd.
D_8A4_CN, My Phuoc 3I.P, Ben Cat, Binh Duong, Vietnam
Tel. +84 650 378 4992 Ext. 440
Fax. +84 650 378 4993
SCG Plastics Co., Ltd.
2nd floor N. 136/137, Pyay Road, Saw Bea
Gyi Gone, Yangon, Myanmar
Tel. +95 951 946 41, +95 973 183 332
MYANMAR
VIETNAM
SCG Plastics (China) Co., Ltd. (Shanghai Office)
RM 1012 Huarong Building No.1271-1289, South of Pudong
Road, Pudong New Area, Shanghai, China, 200122
Tel. +86 182 170 743 69
Fax. +86 216 888 6092
AUSTRALIA
SCG Trading Australia Pty Ltd.
Level 4, No.1 Chandos Street,
St. Leonards NSW 2065, Australia
Tel. +61 294 381 225, +61 411 022 231
Fax. +61 294 360 195
SCG Plastics (China) Co., Ltd. (Guangzhou Office)
Unit 3207, Block B, China Shine Plaza, No.9 Lin He Xi
Road, Tianhe, Guangzhou, China 510610
Tel. +86 139 030 579 29
Fax. +86 203 810 1370
INDONESIA