X-ray Inspection System
Evolving from “ContaminantDetection” to “Assuring OverallProduct Quality, Customer Safetyand Brand Loyalty”
KD74XX Series
2
The KD74XX series provides Product Safety andAssured Quality for customers
The KD74XX X-ray Inspection System confirms correct productweight, component number, placement and shape while constantly monitoring for the presence of dense contaminants.
The simple implementation of ComplexImaging Techniques allows low density con-taminants, such a bone and plastics as wellas metallic wires to be reliably detectedwithout unnecessary losses caused byextrended set up times and high levels offalse rejection.
�High levels of detection sensitivity without product wastage
�Masking Technology
X-ray Inspection System
1. Simultaneous Product Checks to EnsureSafety and Conformity
Sharpening low penetration productsSharpening low penetration products
Concept of combination algorithm
Reduce product effectsReduce product effectsReduce product effects
Sharpening low penetration products
Smoothing uneven productsSmoothing uneven productsDetect wire shaped contaminantsDetect wire shaped contaminants
Smoothing uneven products
MaskingMaskingMasking
Detect wire shaped contaminants
Detect soft contaminantsDetect soft contaminantsDetect soft contaminants
Metal DetectorMetal DetectorMetal Detector
ProductProductProduct
This function eliminates the constantdense area from the inspectedimage, such as packaging, clips orde-oxidiser sachets, consequentlyimproving the detection sensitivity inthe remaining product.
�Shape Detection Technology
The shapes of eachproduct are confirmed,ensuring consistantpresentation for theconsumer.
�Multi-line Inspection TechnologyIndividual products produced on multiple lane conveyors can be inspectedsimultaneously. When a non-conforming product is identified in a single lane,only product from that lane is removed, ensuring line efficiency is maximised.
�Missing Product Detecting Technology
When conventional gravimetricweighing can not be used to confirmthe correct product weight, the“Missing Product” functions areemployed.
The complete productpresence can be confirmed by checkingthe density of productin specific locationswithin a pack.
OK
OK
NG
X-ray Inspection System
Rejector
�Mass Measurement Technology
Enables finished packages to be further inspected for low andhigh weight conditions using advanced mass measurementalgorithms.
3
2. Easy Control and Maintenance for Maximum Operating Time
Inspection ApertureMax. width : 690 mmMax. height : 250 mmMax. 50 O
Inspection ApertureMax. width : 390 mmMax. height : 150 mmCompact High Speed Flat Bed Conveyor
Inspection ApertureMax. width : 240 mmMax. height : 50 mmCompact High Speed Flat Bed Conveyor
Inspection ApertureMax. width : 240 mmMax. height : 50 mmCompact Conveyor format with integral infeed hopper and rejection mechanism
Inspection ApertureDia. 2 InchPipeline Format with integral rejection valve.
Applicable SystemFeatureForm Typical Application
Packed
Un-packed
Bulk
Liquid
Sm
all
Larg
eP
rodu
ct S
ize
Large powder sack /Meat block
Retail Pack / Foil-top Tray
Fresh chicken fillet or Burger patty
Grain and Seafood
Soup / Sauce without container
�Projection MonitorSimultaneous On-Screen imaging and operating adjustmentproviding convenient control and adjustment.
�Quick release conveyor belt
Easy to use belt release provides easy cleaning, re-assembly and re-alingment.
3. Seamless Information Transfer and Data Recording�Ethernet *1
Industry standard Ethernet communication is employed toproduce live production data and reports, as well as uploading and refreshing product data.
�USB compliant *1
USB port (option) provides the capture of data on memorysticks, without the need for networking.
*1: This is only for the KD74 series.
4. A Variety of Models for Individual Applications
USB memory
KD7337AW
KD7416AW
KD7416ABW
KD7416ACW
KD7481AW
•15” High Resolutiontouch screen
•Graphic manipulation•20 + algorithms
•No Tools•1 minute•Safe•Simple
4
Safety in design
Priority is given to prevention of X-ray leakage.Operator safety is of utmost importance.
ANRITSU safety mechanismEmergency stop switchThe power supply is cut off by pressing a switch, then the rotatingpart is stopped and the X-ray radiatorcompletely stops.
X-ray irradiation displayThe lamp is lit while X-rays are beingirradiated.
X-ray irradiation ON/OFF keyTurning the key to OFF stops X-rayirradiation completely.
X-ray shield coverThe cover opens by the ON/OFF keyof the X-ray radiator. The X-ray radiator completely stops due to theaction of the cover open/close sensorwhen the cover opens.
Monitoring sensor for hand insertionWhen the sensor is interrupted for acertain period of time, X-ray irradiationis stopped.
Leakage prevention curtainPrevent X-ray leakage. When inspectingunpacked products, additional coversmade of SUS are furnished instead, toavoid possible contact of the materialswith lead to the products.
Safety managementX-ray Inspection System has been designed to fully satisfy the safe operation. However, to ensure even higher safety,
use the safety procedures outlined below.
1. Periodic measurement and storage of X-ray leakage dose data
3. Additional Safety Measures
Depending on the product shape, weight and packaging, it maybe necessary to furnish X-ray leakage prevention covers to theupstream and downstream conveyors, instead of using X-ray leakprevention curtains.
2. Management of the working hours of operators
4. No disassembly or modification
NEVER modify or disassemble the main unit, covers, X-ray leakprevention curtains, safety covers, safety interlocks, etc., other-wise the X-ray leak-proof design may no longer be functional.
(2) Safety for humans
• We are always exposed to radiation: In the natural world, we receive irradiation of 1100 µSv a year on average, and in the case of a chest X-ray,
300 µSv in just one time. (the unit µSv [micro Sievert] indicates the radiation level of X-rays)
• The X-ray leakage level of our X-ray inspection system is 1 µSv/h or lower (1.3 mSv/3 months or lower)Note: 3 months = 13 weeks (52 weeks is one year)
1 µSv/h x 10 hours x 5 days x 13 weeks = 0.65 mSv/3 months
(1) Safety of checked products• WHO concluded in 1980 that "food products irradiated with 10 kGy or lower level of X-rays present no problem in terms of toxic level, nutritional value,
and microbiological aspects".• The maximum X-ray irradiation level by our X-ray inspection system to the checked product is 0.001 Gy or less, which is much lower than the value
designated by WHO standard.• If the product being checked happens to stop moving during X-ray irradiation, X-ray irradiation is stopped to keep the irradiation level to 0.1 Gy or
below.
X-ray Inspection System
X-ray shield cover open/closesensorX-ray radiation completely stopswhen the cover opens.
Safety of X-rays and regulatory constraints
Co
ntam
inan
t Insp
ection
System
5
Stainless steel wire of 0.2 mm diameter x 2-mm long can be detected. Contaminants in single packages and contaminants in tall products upto 120-mm pass height can be detected at high sensitivity.
External Dimensions
W500
(640
)
265
465
730
(240)196
605450
270
240
160
120
Range to be inspected
Bel
t wid
th
Pas
s he
ight
120
1360
to 1
460
700
to 8
00
33.5 dia. Roller
60 dia.
Effective detection width 240
(80 )
KD7405AWKD7405BWKD7405ADWKD7405BDW
Units: mm
KD7405AW
Interactive guidance
.
Printer(Option)
LIST
Statistical functions
NG History
NG
Operation history
Online interface
Supports flow direction change
Variable belt speed
BELT SPEED
LOW HIGH
Variable passline height
Rejection confirmation
function (Option)
NG
Dust and waterproof protection class
Color LCD touch panel
Windows OS
WindowsOSTM
Simple cleaning
HACCP Support
HACCPSupport
CE Marking(Option)
FCC Marking(Option)
FCCUSB
USB
See page 4 for safer operation.
Model KD7405AW / KD7405ADW KD7405BW / KD7405BDW
Detection sensitivity Note 1 Fe sphere and SUS sphere 0.3 mm dia., SUS wire 0.2 mm dia. x 2 mm long
X-ray output Max. 60 kV, 210 W (variable voltage and current) Max. 80 kV, 210 W (variable voltage and current)
Safety X-ray leakage dose: Max. 1 µ Sv/ h or less, Prevention of X-ray leakage by safety device
Display 15-inch Color TFT LCD (unified image monitoring screen and operation screen)
Operation method Touch panel
Product size Note 2 Max.width: 240 mm, Max. height: 120 mm
Belt width 270 mm
Masking function Equipped as standard
Missing product detection function Equipped as standard
Clip check function Equipped as standard
Preset memory Max. 100 products
Belt speed 5 to 90 m/ min (variable speed depending on Product No.)
Max. product weight Note 3 5 O (2 O when belt speed exceeds 60 m/ min), [Option: 10 O at 5 to 40 m/ min]
Power requirements 200 to 240 Vac ±10%, single phase, 50/60 Hz, 1 kVA, rush current 80 A (typ.) (5 ms or less)
Mass 230 O
Environmental conditions Temperature 0° to 35°C (0° to 40°C with optional air conditioner), relative humidity 30% to 85%, no condensation
Protection class IP66 Compliance (for conveyor), IP42 Compliance (for other parts), one-touch removal belt
Casing material Stainless steel (SUS304)
Specifications
Note 1: Actual sensitivity depends on the physical properties of checked products(contents and shape) and on the environmental conditions.Note 2: The inlet and outlet may require covers, depending on the length and weight of checked products.Note 3: Sum total of checked product weight on the conveyor
KD7405AW / KD7405BWX-ray Inspection System
Model W
KD7405AW800KD7405BW
KD7405ADW1000KD7405BDW
Co
ntam
inan
t Insp
ection
System
KD7416AW / KD7416BWContaminants in large and wide products and products in bulk can bedetected.
KD7416AW
X-ray Inspection System
See page 4 for safer operation.
Interactive guidance
.
Printer(Option)
LIST
Statistical functions
NG History
NG
Operation history
Online interface
Supports flow direction change
Variable belt speed
BELT SPEED
LOW HIGH
Variable passline height
Rejection confirmation
function (Option)
NG
Dust and waterproof protection class
Color LCD touch panel
Windows OS
WindowsOSTM
Simple cleaning
HACCP Support
HACCPSupport
CE Marking(Option)
FCC Marking(Option)
FCCUSB
USB
390
280
150
340
540
880
500W
(650
)
(280)
Range to be inspected
Pas
s he
ight
150
Effective detection width 390
1530
to 1
630
Pas
slin
e he
ight
700
to 8
00
33.5 dia. Roller
Bel
t wid
th42
0
45060 dia. 271
755
(80 )
External Dimensions
KD7416AWKD7416BWKD7416ADWKD7416BDW
Units: mm
Model W
KD7416AW800KD7416BW
KD7416ADW1000KD7416BDW
6
Model KD7416AW / KD7416ADW KD7416BW / KD7416BDW
Detection sensitivity Note 1 Fe sphere and SUS sphere 0.3 mm dia., SUS wire 0.2 mm dia. x 2 mm long
X-ray output Max. 60 kV, 210 W (variable voltage and current) Max. 80 kV, 210 W (variable voltage and current)
Safety X-ray leakage dose: Max. 1 µ Sv/ h or less, Prevention of X-ray leakage by safety device
Display 15-inch Color TFT LCD (unified image monitoring screen and operation screen)
Operation method Touch panel
Product size Note 2 Max.width: 390 mm, Max. height: 150 mm
Belt width 420 mm
Masking function Equipped as standard
Missing product detection function Equipped as standard
Clip check function Equipped as standard
Preset memory Max. 100 products
Belt speed 5 to 60 m/ min (variable speed depending on Product No.)
Max. product weight Note 3 5 O, [Option: 10 O at 5 to 40 m/ min]
Power requirements 200 to 240 Vac ±10%, single phase, 50/60 Hz, 1 kVA, rush current 80 A (typ.) (5 ms or less)
Mass 290 O
Environmental conditions Temperature 0° to 35°C (0° to 40°C with optional air conditioner), relative humidity 30% to 85%, no condensation
Protection class IP66 Compliance (for conveyor), IP42 Compliance (for other parts), one-touch removal belt
Casing material Stainless steel (SUS304)
Specifications
Note 1: Actual sensitivity depends on the physical properties of checked products(contents and shape) and on the environmental conditions.Note 2: The inlet and outlet may require covers, depending on the length and weight of checked products.Note 3: Sum total of checked product weight on the conveyor
Co
ntam
inan
t Insp
ection
System
340
540
880
420
800500
1530
to 1
630
700
to 8
00
450(335)
271755
390
23022
0
(650
)
Range to be inspected
Effective detection width 390
Pas
s he
ight
220
33.5 dia. Roller
60 dia.
Bel
t wid
th
(80 )
X-ray Inspection System
KD7417BW
KD7417BW
Contaminants in large and wide products and products in bulk can bedetected.
External Dimensions
KD7417BW
Units: mm
See page 4 for safer operation.
Interactive guidance
.
Printer(Option)
LIST
Statistical functions
NG History
NG
Operation history
Online interface
Supports flow direction change
Variable belt speed
BELT SPEED
LOW HIGH
Variable passline height
Rejection confirmation
function (Option)
NG
Dust and waterproof protection class
Color LCD touch panel
Windows OS
WindowsOSTM
Simple cleaning
HACCP Support
HACCPSupport
CE Marking(Option)
FCC Marking(Option)
FCCUSB
USB
Model KD7417BW
Detection sensitivity Note 1 Fe sphere and SUS sphere 0.3 mm dia., SUS wire 0.2 mm dia. x 2 mm long
X-ray output Max. 80 kV, 210 W (variable voltage and current)
Safety X-ray leakage dose: Max. 1 µ Sv/ h or less, Prevention of X-ray leakage by safety device
Display 15-inch Color TFT LCD (unified image monitoring screen and operation screen)
Operation method Touch panel
Product size Note 2 Max.width: 390 mm, Max. height: 220 mm
Belt width 420 mm
Masking function Equipped as standard
Missing product detection function Equipped as standard
Clip check function Equipped as standard
Preset memory Max. 100 products
Belt speed 5 to 40 m/ min (variable speed depending on Product No.)
Max. product weight Note 3 10 O
Power requirements 200 to 240 Vac ±10%, single phase, 50/60 Hz, 1 kVA, rush current 80 A (typ.) (5 ms or less)
Mass 300 O
Environmental conditions Temperature 0° to 35°C (0° to 40°C with optional air conditioner), relative humidity 30% to 85%, no condensation
Protection class IP66 Compliance (for conveyor), IP42 Compliance (for other parts), one-touch removal belt
Casing material Stainless steel (SUS304)
Specifications
Note 1: Actual sensitivity depends on the physical properties of checked products(contents and shape) and on the environmental conditions.Note 2: The inlet and outlet may require covers, depending on the length and weight of checked products.Note 3: Sum total of checked product weight on the conveyor 7
Co
ntam
inan
t Insp
ection
System
Interactive guidance
.
Printer(Option)
LIST
Statistical functions
NG History
NG
Operation history
Online interface
Supports flow direction change
Variable belt speed
BELT SPEED
LOW HIGH
Variable passline height
Rejection confirmation
function (Option)
NG
Dust and waterproof protection class
Color LCD touch panel
Windows OS
WindowsOSTM
Simple cleaning
HACCP Support
HACCPSupport
CE Marking(Option)
FCC Marking(Option)
FCCUSB
USB
The KD7405ABW/KD7416ABW units are used to detect contaminantsin unpacked bulk products, such as meat, fish, etc., when X-ray leakage prevention curtains cannot be used.
See page 4 for safer operation.
X-ray Inspection System
KD7405ABW/KD7416ABW
KD7405ABW
EC
D
B
132
A
450
700
to 8
00
700
to 8
00
915
to 1
015
(KD
7405
ABW
)94
5 to
105
5 (K
D74
16AB
W)
F
HI
1430
1360
1000
435
Effective detection width G
Pas
s he
ight
50
Bel
t wid
th
60 dia.
33.5 dia. Roller
hopperInterlock
External Dimensions
KD7405ABWKD7416ABW
Units: mm
The chute rejector isan option.
Model KD7405ABW / KD7416ABW
Detection sensitivity Note 1 Fe sphere and SUS sphere 0.3 mm dia., SUS wire 0.2 mm dia. x 2 mm long
X-ray output Max. 60 kV, 210 W (variable voltage and current)
Safety X-ray leakage dose: Max. 1 µ Sv/ h or less, Prevention of X-ray leakage by safety device
Display 15-inch Color TFT LCD (unified image monitoring screen and operation screen)
Operation method Touch panel
Product size Note 2 Max.width: 240 mm, Max. height: 50 mm
Belt width 270 mm
Masking function Equipped as standard
Missing product detection function Equipped as standard
Clip check function Equipped as standard
Preset memory Max. 100 products
Belt speed 5 to 60 m/ min (variable speed depending on Product No.)
Max. product weight Note 3 5 O
Power requirements 200 to 240 Vac ±10%, single phase, 50/60 Hz, 1 kVA, rush current 80 A (typ.) (5 ms or less)
Mass 270 O
Environmental conditions Temperature 0° to 35°C (0° to 40°C with optional air conditioner), relative humidity 30% to 85%, no condensation
Protection class IP66 Compliance (for conveyor), IP42 Compliance (for other parts), one-touch removal belt
Casing material Stainless steel (SUS304)
Specifications
Note 1: Actual sensitivity depends on the physical properties of checked products(contents and shape) and on the environmental conditions.Note 2: The inlet and outlet may require covers, depending on the length and weight of checked products.Note 3: Sum total of checked product weight on the conveyor8
KD7405ABW KD7416ABW
A 232 382
B 270 420
C 265 340
D 465 540
E 730 880
F 1360 to 1460 1530 to 1630
G 240 390
H 196 271
I 605 755
Co
ntam
inan
t Insp
ection
System
KD7405ACW
X-ray Inspection System
KD7405ACW/KD7416ACWThe KD7405ACW / KD7416ACW units are applied to detect contaminants forthe light products, which is easily caught by the shield curtain at conveying,also for the small bags.
See page 4 for safer operation.
Interactive guidance
.
Printer(Option)
LIST
Statistical functions
NG History
NG
Operation history
Online interface
Supports flow direction change
Variable belt speed
BELT SPEED
LOW HIGH
Variable passline height
Rejection confirmation
function (Option)
NG
Dust and waterproof protection class
Color LCD touch panel
Windows OS
WindowsOSTM
Simple cleaning
HACCP Support
HACCPSupport
CE Marking(Option)
FCC Marking(Option)
FCCUSB
USB
1340 to 13551268500
H
E
G450
700
to 8
00
760
to 8
90
A
BD
C
Effective detection width F
Pas
s he
ight
30
to 5
0
Bel
t wid
th
60 dia.
Pas
slin
e he
ight
10 to 15
External Dimensions
KD7405ACWKD7416ACW
Units: mm
KD7405ACW KD7416ACW
A 230 420
B 265 340
C 465 540
D 730 880
E 1420 to 1550 1590 to 1720
F 240 390
G 196 271
H 605 755
The shuttle rejector isan option.
Model KD7405ACW / KD7416ACW
Detection sensitivity Note 1 Fe sphere and SUS sphere 0.3 mm dia., SUS wire 0.2 mm dia. x 2 mm long
X-ray output Max. 60 kV, 210 W (variable voltage and current)
Safety X-ray leakage dose: Max. 1 µ Sv/ h or less, Prevention of X-ray leakage by safety device
Display 15-inch Color TFT LCD (unified image monitoring screen and operation screen)
Operation method Touch panel
Product size Note 2 Max.width: 240 mm, Max. height: 50 mm
Belt width 270 mm
Masking function Equipped as standard
Missing product detection function Equipped as standard
Clip check function Equipped as standard
Preset memory Max. 100 products
Belt speed 5 to 60 m/ min (variable speed depending on Product No.)
Max. product weight Note 3 5 O
Power requirements 200 to 240 Vac ±10%, single phase, 50/60 Hz, 1 kVA, rush current 80 A (typ.) (5 ms or less)
Mass 270 O
Environmental conditions Temperature 0° to 35°C (0° to 40vC with optional air conditioner), relative humidity 30% to 85%, no condensation
Protection class IP66 Compliance (for conveyor), IP42 Compliance (for other parts), one-touch removal belt
Casing material Stainless steel (SUS304)
Specifications
Note 1: Actual sensitivity depends on the physical properties of checked products(contents and shape) and on the environmental conditions.Note 2: The inlet and outlet may require covers, depending on the length and weight of checked products.Note 3: Sum total of checked product weight on the conveyor 9
Co
ntam
inan
t Insp
ection
System
X-ray Inspection System
KD7337AW
KD7337AW
High-performance inspection of large bags and boxes achieved by the690 mm-wide, 250 mm-high opening.
See page 4 for safer operation.
Interactive guidance
.
Printer(Option)
LIST
Statistical functions
NG History
NG
Operation history
Online interface
Supports flow direction change
Variable belt speed
BELT SPEED
LOW HIGH
Variable passline height
Rejection confirmation
function (Option)
NG
Dust and waterproof protection class
Color LCD touch panel
Windows OS
WindowsOSTM
Simple cleaning
HACCP Support
HACCPSupport
CE Marking(Option)
FCC Marking(Option)
FCC
Air conditioner is equippedas standard.
1700
to 1
800
2070
450
to 5
50
80 dia.
510
250
690
1340
810
530
780
1800
700
1140412
800
Range to be inspected
Pas
s he
ight
250
Effective detection width 690
Pas
slin
e he
ight
B
elt w
idth
External Dimensions
KD7337AW
Units: mm
Model KD7337AW
Detection sensitivity Note 1 Fe sphere and SUS sphere 0.5 mm dia.
X-ray output Max. 60 kV, 210 W (variable voltage and current)
Safety X-ray leakage dose: Max. 1 µSv/h or less, Prevention of X-ray leakage by safety device
Display 15-inch Color TFT LCD (unified image monitoring screen and operation screen)
Operation method Touch panel
Product size Max.width: 690 mm, Max. height: 250 mm
Belt width 780 mm
Major function Detection of contaminants and missing items, masking, clip check (automatic detection level setting)
Preset memory Max. 100 products
Belt speed 10 to 35 m/min. (10 to 30 m/min. for products exceeding 40 O in weight)
Max. product weight Note 2 50 O
Power requirements 200 to 240 Vac ±10%, single phase, 50/60 Hz, 1.4 kVA, rush current 80 A (typ.) (5 ms or less)
Mass 700 O
Environmental conditions Temperature 0° to 40°C, relative humidity 30% to 85%, no condensation
Protection class IP66 Compliance (for conveyor), IP52 Compliance (for other parts)
Casing material Stainless steel (SUS304)
Specifications
Note 1: Actual sensitivity depends on the physical properties of checked products(contents and shape) and on the environmental conditions.Note 2: Sum total of checked product weight on the conveyor
10
Co
ntam
inan
t Insp
ection
System
KD7481AWNewly released X-ray inspection system for incorporation into production line utilizing fluid flowing
KD7481AW
Air conditioner and Rejector are equipped as standard.
X-ray Inspection System
Interactive guidance
.
Printer(Option)
LIST
Statistical functions
NG History
NG
Operation history
Online interface
Supports flow direction change
Variable passline height
Dust and waterproof protection class
Color LCD touch panel
Windows OS
WindowsOSTM
Simple cleaning
HACCP Support
HACCPSupport
CE Marking(Option)
FCC Marking(Option)
FCCTransportation
speed
USB
USB
See page 4 for safer operation.
OK
NG
445
153
285
1020
730
290
1190
1350
to 1
410
730
to 7
9080
220
153
450 520 605
215 39060 dia.
Air-conditioner
IDF/ISOClump fittings2.0S
External Dimensions
Units: mm
KD7481AW
Model KD7481AW
Detection sensitivity Note 1 Fe sphere and SUS sphere 0.6 mm dia.
X-ray output Max. 60 kV, 210 W (variable voltage and current)
SafetyX-ray leakage dose: Max. 1 µ Sv/ h or less,
Prevention of X-ray leakage by safety device
Display15-inch Color TFT LCD
(unified image monitoring screen and operation screen)
Operation method Touch panel
Product size (solids in fluid)7 mm or smaller
(Less than 1/3 of the minimum height of the inspection section)
Transfer pipe dimension 2-inch (50.8 mm) dia.
Preset memory Max. 100 products
Processing capacity 5.4 kr/ h
Power requirements200 to 240 Vac ±10%, single phase, 50/60 Hz, 1.6 kVA,
rush current 80 A (typ.) (5 ms or less)
Mass 250 O
Environmental conditionsTemperature 0° to 40°C, relative humidity 30% to 85%,
no condensation
Protection class IP66 Compliance (for transfer products section)
Casing material Stainless steel (SUS304)
SpecificationsType of rejecting Ball valve
Drive method Air drive
0.5 to 0.7 MPa Note 2
Air source (Upon detecting pressure lower than 0.35 MPa, the safety device operates, stopping X-ray irradiation.)
Specifications of the rejector
Note 2: Use dry air. Be sure to use an air dryer if there is a possibility of freezing.Note 3: Inspection system for targets transferred in fluids mixed with water.Note 4: For details, consult your sales representative.
Note 1: The actual detection sensitivity varies depending on the type of foreign matter, properties of inspected objects (such as contents and shape), and the usage environment.
11
Rejector
Flipper typeKW4103AWKW4104AW
Air Jet typeKW4822BW
Dropout typeKW4672DWKW4673DW
CAT. NO. K3118-A-1 2006-9 50 (ddc) Printed in Japan
INTERNATIONAL SALES DEPARTMENT5-1-1 Onna, Atsugi-shi, Kanagawa-Prf., 243-0032, JAPANPHONE +81 46 296 6699FAX +81 46 225 8387E-Mail: [email protected]://www.anritsu-industry.com/E
ISO14001 CERTIFICATE No.JQA-EM0210ISO 9001 CERTIFICATE No.JQA-0566
ANRITSU INDUSTRIAL SOLUTIONS CO., LTD.
Printed with environment-friendly vegetable soybean oil ink.
Printed on 100% Recycled Paper
Specifications are subject to change without notice. No part of thewhole of this catalog may be reproduced without our permission.
In addition to daily inspection, an annual maintenance checkshould be carried out.
ANRITSU INDUSTRIAL SOLUTIONS CO., LTD. 2006
Recommended