Materials • 228P-800 - Really Big Jig

• 206A-010 - Designer Beading Awl

• AWB-120130-12M - 12 Gauge Aluminum Artistic Wire

• Cutters

1. Lay the template on the Really Big Jig. Use a Beading Awl to poke holes along the design following the bends and curves.

3. Cut the excess wire.

2. Beginning at the center swirl, wrap the 12 gauge Aluminum Artistic Wire around the pegs on the insides and outsides, following the pattern.

4. Remove the design from the pegs, and wrap the tail around the Flower Stem. Add embellishments, dangles and wire wraps to finish your design!

1

3

2

4

®

FLOWER GARDEN ARTBy: Meredith Roddy