EXTERIOR HARDWARE 233
Wipers & Accessories Wipers 234 - 239
Windshield Wash Systems 240
Cleats, Chocks & Deck Pipes 241 - 245
Deck Fills 246 - 249
Rail Fittings Rail Fittings 251 - 254
Handrails 254 - 255
Boat Top Fittings 255 - 257
Ladders, Steps & Non-Slip 258 - 262
Flags & Flag Holders 263 - 264
Ventilation Blowers 265 - 266
Ventilators 266 - 271
Tank Vents 271 - 272
Deck Plates 273 - 274
Hatches & Portlights 274 - 278
Oceanair Shades 279
Hatch Adjusters 280 - 283
Moldings & Rub Rail Molding / Rub Rail / Trim 285 - 289
Weather Seal 289
Stazo Marinedeck / Starboard 290
234
EXTERIO
R H
AR
DW
AR
E
Speich Windshield Wipers
Speich Clear View ScreenSPEICH Clear view screens keep a glass disk free from rain, snow or sea-water by fast rotation. The motor is placed in the centre and is fastened to the xed glass so as to obtain the largest possible eld of vision. This particular assembly also makes the unit water and airtight, thus making it suitable for pressurised and air-conditioned bridges. All metal parts are made of brass.SWP AC38S.H-24V* Heated screen 24V
*Request Item - Call to get delivery estimate
Speich from Italy is a specialized high quality manufacturer of wind shield
wiper blades, arms, motors, clear view units, control panels and washing devices. They build according to demanding standards, such as ISO 9002, and do work for such customers as the Italian Navy.
Speich Nautic E SeriesType ‘E’ range of motors for small to medium size boats with wiper arms up to 550mm in length. This motor unit is available in 12 or 24 volts, has two speeds, is a self-parking device and has variable wiping angles (45°, 50° 60°, 70°, 80°, 90°, 100°, 110°). SWP E-1238* 12V, 5-12 mm mounting thicknessSWP E-1264 12V, 15-35 mm mounting thicknessSWP E-1290* 12V, 36-60 mm mounting thicknessSWP E-2438* 24V, 5-12 mm mounting thickness
*Request Item - Call to get delivery estimate
Speich Commercial Wiper ArmsAdjustable between 11 and 22"•Fits on any 1/2" shaft•316 S/S with brushed nish•Very heavy duty•Fits standard blades•
SWP E-95-P Pantographic StyleSWP E-95-F Pendulum Style
Speich Nautic 'LP' SeriesType 'LP' range is available for 12V and 24V DC, has two speeds, is a self-parking device, and has a variable wiping angle It’s easy to modify the motor unit wiping angle and park position side with the system already installed. SWP LP-1240* 12V 40 mm±5SWP LP-2440* 24V 40 mm±5
*Request Item - Call to get delivery estimate
Rocker switch.SWP ESB 12 - 24 V
Speich Heavy Duty Wiper SystemsHeavy duty wiper systems for large yacht and commercial applications. All systems are custom engineered for each situation. Motor unit type M is designed to be used on medium sized windscreen wipers installed on work boats for civil and military applications. This motor has a variable wiping angle and it is designed for heavy duty applications. Self-parking position, can be set either left or right. Available rated voltage DC: 12V - 24V - 110V - 220V, AC: 110V - 220V. Motor unit type S is used with arms up to 1200mm and blades up to 1300mm in length are needed. This motor has variable wiping angle and it is designed for heavy duty applications. Self-parking position, can be set either left or right. Motor unit type SF is used when it is necessary to employ a powerful wiper with arms up to 1200mm and blades up to 1300mm length. This motor units is equipped with an electromagnetic brake in order to have a stable park position.
Speich Commercial Wiper BladesAvailable in three styles:
MG series for all at surfaces 300,350,400,450,500mm lengths•AR series for at and curved surfaces (anti ice cover). 390, •470mm lengthsBH series for at and curved surfaces 600, 700, 800, 1000mm •lengths
Speich Commercial Wiper ArmsAll arms are custom made using AISI316 stainless steel with the standard nish being hand-polished (Black arms are available on request).
Please call us or visit www.speich.it for more information
EXTERIO
R H
AR
DW
AR
E235Windshield Wipers
AFI 1000 Series Heavy Duty Wipers & KitsWaterproof housing made of stabilized high impact thermal plastic. Maximum current draw- 5 amps. Up to 16" x 16" arm x blade combination recommended. Kit includes #31012B 14" polymer blade and #33007 deluxe adjustable arm. Self parking left or right.
12 volts•6-5/8" L x 3-3/8" W x 2" H•3 year warranty•
Part # DescriptionShaft Dia.
Shaft Length Sweep
AFI 37100 Frame mount kit 5/8" 2-1/2" 80o
AFI 37200 Frame mount kit 5/8" 2-1/2" 110o
AFI 37110 Motor only 5/8" 2-1/2" 110o
AFI 37180 Motor only 5/8" 2-1/2" 80°
5/8" Diameter shaft•Left or right parking•Accommodates blades 16" to 24"•12 Volt draws max., 3.5 amp•Includes 5 amp fuse and holder•2 Speed motor•Selectable 45• o, 60o, 80o or 110o sweepCompact size- 7-7/16"L x 4"W x 2"H•12 volts•3 year warranty•Not recommended for exterior use•
AFI 34000 12 Volt, 2-1/2" Shaft, 80°AFI 34001 12 Volt, 1-1/2" Shaft, 80°AFI 34005 12 Volt, 3-1/2" Shaft, 80°AFI 34011 12 Volt, 1-1/2" Shaft, 110°AFI 34210 24 Volt, 2-1/2" Shaft, 110°Requires the use of a three position switch.Parts:
C/H 75212-04 3-Position switch (Off/Park-Low-High)AFI 33025 Motor cover White
AFI “MRV” Heavy Duty Wiper Motors
AFI HD 1.5 Wiper Motors
Powers a 22” Deluxe arm and Deluxe blade combination or a •20” Premier arm and Premier blade combination Includes 5 amp fuse and holder •Measures approximately 7-3/4” L x 4” W x 2-3/4”•
AFI 71011 1” Shaft, 110°AFI 71012 2”Shaft, 110°AFI 71081 1” Shaft, 80°AFI 71082 2” Shaft, 80°
AFI HD 2.5 Wiper Motors
Powers a 26” Deluxe arm and Deluxe blade •combination or a 24” Premier arm and Premier blade combination Includes 6 amp fuse and holder •Measures approximately 7-7/8” L x 4-1/4” W x 3”•
AFI 82011 1” Shaft, 110° AFI 82012 2” Shaft, 110°AFI 82081 1” Shaft, 80°AFI 82082 2” Shaft, 80°
AFI Heavy Duty Wiper Motors
Common features:Fully sealed powder coated aluminum •waterproof base and housing Factory preset sweep angles of 80° or 110°, with easy •adjustment to 45° or 60° Chrome plated solid brass knurled drive nut with brass and •stainless steel drive shaft Two speed motor •Sealed 6” wire leads, 16 AWG •Adjustable right or left self parking (coast to park)•5/8” diameter shaft (16mm) •RF shielded circuitry lters noise from electronics•12 volts•3 year warranty•
236
EXTERIO
R H
AR
DW
AR
E
Windshield Wipers
EXTERIO
R H
AR
DW
AR
E237Windshield Wipers
AFI Model AFI-500Standard Wipers & KitsWaterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic.
Maximum current draw: 2 amps•Includes 11" deluxe curved blade 33004 •and deluxe adjustable arm 33006ASAdjustable sweep right or left•Self parking•12 volts•
Part # DescriptionShaft Dia.
Shaft Length Sweep
AFI 30004 Frame mount kit 1/2" 2-1/2" 80o
AFI 30005 Frame mount kit 1/2" 2-1/2" 110o
Parts:AFI 33000 Deck mount adapter for wipers w/ 1/2" shaft
AFI Model STD Standard Wiper KitsCase construction is of •corrosion-proof, aluminum alloyBase plate and mounting plate •are naval brass with heavy chrome platingBlack crackle, nonre ective •
nishIncludes 11" deluxe curved blade •33004 and deluxe adjustable arm 33006ASSelf parking•Not waterproof - Interior installations only•12 volts•
Part # DescriptionShaft Dia.
Shaft Length Sweep
AFI 32000 Frame mount 3/8" 2-1/2" 80o
AFI 32001 Deck mount 1/2" 3-1/2" 80o
AFI 32002 Frame mount 3/8" 2-1/2" 110o
Parts:AFI 33000 Deck mount adapter for wipers w/ 1/2" shaft
AFI Model WMW Standard Wiper Kit
Totally sealed, 100% water resistant wiper. The corrosion resistant case and shaft housing are made of heavy, chrome-plated brass. Front plate and wiper shaft are manufactured from stainless steel.
Includes 11" deluxe curved blade •33004 and deluxe adjustable arm 33006ASMax. current draw: 5 amps•12 volts•
Part # DescriptionShaft Dia.
Shaft Length Sweep
AFI 30002 Frame mount 3/8" 2-1/2" 110°
Parts:AFI 33000 Deck mount adapter for wipers w/ 1/2" shaft
AFI Deluxe S/S Wiper ArmsFit on 5/8" shafts•Articulating/bend back feature•Set screw motor shaft clamping•
AFI 33006A 6-3/4" to 10-1/2"AFI 33007A 10" to 14"AFI 33010A 14" to 20"
Black epoxy coated stainless steel•AFI 33012A* 10" to 14"AFI 33014A* 14" to 20"
Pantographic Wiper Arms
Adjustable pantographic stainless steel arm•AFI 33032A 12" to 17"AFI 33037A 17" to 22"
AFI Premier S/S Wiper Arms316 Stainless Steel and brass construction•Features “Articulating/Bend-Back” design that locks •the arm in an upright position for window cleaningChrome plated solid brass motor shaft mount with set •screw for a secure installationFit on 5/8” shafts•
*Wet version has a built-in, two sided spray head and hose (with 18” lead). Premier Arms:AFI 33082 10" - 12"AFI 33082W 10" - 12" WetAFI 33084 15" - 20"AFI 33084W 15" - 20" WetAFI 33086 20" - 25"AFI 33086W 20" - 25" WetAFI 33088 25" - 30"
Pantographic Premier Arms:AFI 33090 12" - 17"AFI 33090W 12" - 17" WetAFI 33092 17" - 22"AFI 33092W 17" - 22" WetAFI 33094 22" - 26"AFI 33096 26" - 30"
Parts:AFI 33008 Allows for use of deluxe arms on 30000
and 32000 series wiper motors.
238
EXTERIO
R H
AR
DW
AR
E
Windshield Wipers
United Technologies208 & 212 Series Wiper Motors
Oscillating wiper motor produces 5.9 lbs (208) &•8.85 lbs (212) of torqueRFI suppression lter noise from electronics•Available in 65°, 85° or 110° sweeps•Con gurable in a clockwise or counterclockwise park•1", 2" and 3" shaft lengths available•Brass pivot body•Stainless steel pivot shaft•12 Volt•Marine grade speci cations•208 Series L: 8.3" x W: 4.01"•212 Series L: 8.33" x W: 3.82"•
Part # Shaft SweepMax. Blade
UTP AMP-208-2000 1" 65° 18"
UTP AMP-208-2001 1" 85° 17"
UTP AMP-208-2003 1" 110° 15"
UTP AMP-208-2200 2" 65° 18"
UTP AMP-208-2201 2" 85° 17"
UTP AMP-208-2203 2" 110° 15"
UTP AMP-212-2000 1" 65° 22"
UTP AMP-212-2001 1" 85° 20"
UTP AMP-212-2003 1" 110° 18"
UTP AMP-212-2200 2" 65° 22"
UTP AMP-212-2201 2" 85° 20"
UTP AMP-212-2203 2" 110° 18"
UTP AMP-212-2400 3" 65° 22"
UTP AMP-212-2401 3" 85° 20"
UTP AMP-212-2403 3" 110° 18"
AFI Polymer Wiper BladesDeluxe style - curved blade. These wipers are developed speci cally for marine use. The wiper is made of glass-impregnated poly and will never rust. Utilizes marine grade rubber squeegee for long life. Black.AFI 31012B 12"AFI 31014B 14"AFI 31016B 16"AFI 31018B 18"AFI 31020B 20"AFI 31022B 22"AFI 31024B 24"
AFI Deluxe S/S Wiper BladesCurved blade•"Slide and Lock" system•
AFI 33004 11"AFI 33005 14"AFI 33015 16"AFI 33016 18"AFI 33017 20"
AFI Classic Straight S/S Wiper Blade
Replaces blades on boats manufactured before 1990. Straight - Hook & Catch.
Not for use with AFI deluxe •and standard arms
AFI 33901 11"
AFI Premier S/S Wiper BladesMarine grade silicone squeegee•Multiple 'claws' help spread pressure evenly•Made from 316 stainless steel•
AFI 33021S 20"AFI 33022S 22"AFI 33024S 24"
EXTERIO
R H
AR
DW
AR
E239Windshield Wipers
United Technologies Flex Wiper BladesFlexible for curved or at glass•Re llable molded wiper elements•Galvanized frames, powder coated•
UTP AMP-302-1120 12"UTP AMP-302-1140 14"UTP AMP-302-1160 16"UTP AMP-302-1180 18"UTP AMP-302-1200 20"UTP AMP-302-1220 22"UTP AMP-302-1280 28"
United Technologies Pantographic Wiper Arms
Made of stainless steel at wire•Flip back for cleaning•Includes mounting bolt and nut•
UTP AMP-341-1140 14" ArmUTP AMP-341-1141 14" Arm w/ adapter*UTP AMP-341-1160 16" ArmUTP AMP-341-1161 16" Arm w/ adapter*UTP AMP-341-1180 18" ArmUTP AMP-341-1200 20" ArmUTP AMP-341-1220 22" Arm
United Technologies Adjustable Wiper ArmsMade of stainless steel at wire•Flip back for cleaning•Black nish•Hook blade connection•Rotatable head•
UTP AMP-341-5001 11" to 15.5"UTP AMP-341-5002 14.5" to 19.5"
Parts:UTP AMP-305-1015 Pantographic adaptor breglassUTP AMP-305-1021 Pantographic adaptor metal & glassUTP AMP-312-1035* 4 Litre washer bottleUTP AMP-313-1016 Fitting kitUTP AMP-313-1019* Wet kit for armsUTP AMP-314-1009 50' x 3/16" ID hoseUTP AMP-334-1008 Black motor cover w/ switchUTP AMP-334-1009 Black motor coverUTP AMP-334-1012 Sand motor coverUTP AMP-404-1001 3/16" x 3/16" x 3/16" hose T
*Includes adapter AMP-305-1015 for breglass mounting with self-tapping screws.
*Request Item
United Technologies Wiper Arm & Blades
Top quality stainless steel construction.Straight blades for at windshields.UTP LE-721156S 10" - 14" adjustable armUTP BD-721020-12" Straight bladeUTP BD-721020-14" Straight blade
United Technologies Wiper MotorsParts exposed to the weather are corrosion resistant. An `O' ring between the shaft and bearing stud prevents water from entering.
Preset for 110• o sweep (adjustable 85o, 100o, or 120o)12 Volt•Shaft diameter: 5/8"•Not self parking•
Part # Shaft Length
UTP WWF 12C18 710 1"
UTP WWF 12C18 720 2"
UTP WWF 12C18 730 3"
This wiper motor has the same quality features as the above WWF motors. It also has an integral on-off switchPreset at 65° (adjustable to 85°, 100°, 110° and 120°)
Not self parking•Part # Shaft Length
UTP WWF 12C19 710 1"
UTP WWF 12C19 720 2"
240
EXTERIO
R H
AR
DW
AR
E
Windshield Wipers / Wash Systems
AFI Windshield Washer KitKit includes everything needed for the installation of a washer system on two AFI Deluxe wiper arms.Includes: water tank, 12V pump motor, two thru-deck nozzles, tee tting, two spray nozzles, 16’ of below deck clear plastic tubing, and 8’ of above deck black tubing. Also includes 4 clips to attach tubing to the extension portion of wiper arm, and 4 clips to attach tubing to the main portion of the arm.
Designed to install on AFI Deluxe wiper arms and blades•(may not be compatible with other brands)Easy to install using basic tools•Each spray head has four adjustable nozzles•Spray nozzles snap onto the end of the wiper arm providing •complete spray coverageWater tank capacity: 3 Litres/3.2 quarts•Water tank dimensions: 9-1/4” H x 7” W x 4-1/2” D•
User supplied items needed for installation: 3A fuse and carrier, 3A minimum momentary on/off switch, and black and white stranded wire.AFI 33505
Perko Hand Windshield WiperFor straight and curved windshields. Stainless steel arm and blade holder, other parts chrome plated zinc. Arm can be extended from 6-3/4" to 10-1/2". 3/8" shaft diameter. 1-1/8" maximum panel thickness. Handle length 2-3/8". Blade length 12".PER 533-DP-STS
Sea-Dog Manual Windshield Wiper
Combination chromed brass & stainless steel construction, comes with an 11" blade. For up to 1-5/16" panel thickness.SED 412601-1
Tridon All-Season Wiper BladesThese wiper blades handle any type of weather. They won’t rust or bend out of shape, prolonging the life of the blade. Easy installation, features a pre-attached adaptor that ts 95% of all arm types directly. Also equipped with a poly-coated squeegee, delivering a streak-free wipe every time, and new aerodynamic design helps resist wind lift.TRI AS-11 11" TRI AS-13 13" TRI AS-15 15" TRI AS-16 16" TRI AS-24 24"
Sea-Dog Removable Manual Windshield Wiper
Injected molded nylon/formed 304 stainless. Wiper removes easily from windshield in seconds. Includes 11” lexan blade.SED 412605-1
Sea-Dog Marine Windshield Wiper
Self parking windshield wiper•Stamped 304 stainless cover•Pre-wired for 12 volt DC systems•110• o sweep1/4" shaft•
SED 410810-1 Motor onlySED 410811-1 Complete kit. 8"-12" arm with 11" blade
EXTERIO
R H
AR
DW
AR
E241Pop-Up Cleats
Whitecap E-Z Push-Up CleatsNo saw needed to install, just drill & drop into place. Stainless steel construction.
Part # A B C D E F Max. Rope
WHI 6804C 5-1/7" 1-1/8" 3-5/16" 4-1/2" 3/4" 5/16" 1"
WHI 6809C 6-1/2" 1-1/2" 3-9/16" 6" 7/8" 3/8" 1-1/4"
WHI 6810C 8-3/4" 1-5/8" 4-9/16" 8" 1-1/8" 3/8" 1-1/2"
Attwood Pull-Up CleatsThis cleat recesses ush to the deck for a clean, contemporary look at an affordable price. Corrosion-resistant 316 stainless steel construction. Water-resistant cleat recesses into cast body, and is captured with lubricated seals.
Easy to operate–simply pull up the cleat from its body•Designed for safety–cleat recesses below deck when not in use•Water resistant–cleat recesses into cast body and is captured with rubber seals and ball detents•Durable–cast stainless steel construction and simple design assures long-life and dependable operation •Stud mount, ush cleat•
Part # Description A B C D
ATT 66512-7 4-1/2" 5-1/4" 4-1/2" 3-1/8" 2"
ATT 66516-7 6" 7" 6" 3-1/3" 2-3/8"
ATT 66524-1 8" 8-1/2" 7-3/4" 3-7/8" 2-13/16"
ATT 1484-1 Drainage Receptacle For 4-1/2" Cleat
Attwood Stainless Steel Neat CleatsThis all-new cleat is retractable, with a slim pro le that installs easily on narrow gunwales. The cleat stays up when pulled up and, when lowered, it is only 1/2" above deck. It has a neat, continuous contour to prevent snags and stubbed toes. Each post is a 7/16"-thick rod of solid stainless steel. Drainage receptacles (included) press- t onto the threaded studs to capture moisture and send it to the bilge. The receptacle outlet is sized for standard 1/4" pitot tubing (not included).
Part # A B C D E F G
ATT 66515-7 4-1/2" 1-5/16" 1/2" 1-5/8" 1-1/4" 1-3/4" 3"
ATT 66517-7 6" 1-1/2" 1/2" 1-5/8" 1-1/4" 2-1/4" 3"
Accon Marine Folding Stainless Cleats
Mounts on surface of boat•No cut-outs or hole saws required •Cleat locks down when not needed, •and springs up when locking slide is retractedNo drain tubes or drain receptacles required•Constructed of marine grade 316 cast stainless steel (screws - •not supplied)
ACC 333-4 2-3/8" x 6-1/4"ACC 332-6 3-1/4" x 7-1/2"
Sea-Dog Folding Stud Mount CleatInvestment cast 316 stainless steel construction.SED 041404-1
242
EXTERIO
R H
AR
DW
AR
E
Pop-Up Cleats / Cleats
Whitecap Pop-Up CleatSpring loaded cleat can be mounted horizontally or vertically. Holds fenders, when open and is only 5/8" high when closed. Requires (3) 3/16" fasteners.WHI 6970C
Sea-Dog Herreshoff Pattern S/S Cleats
Investment cast 316 stainless steel.Part # A B C D Fastener
SED 041604-1 4" 5/16" 1-3/4" 1" #10 FH
SED 041605-1 5" 1-1/8" 2-1/8" 1" #10 FH
SED 041606-1 6" 1-1/4" 2-1/4" 1-1/8" 1/4" FH
SED 041608-1 8" 1-1/2" 2-13/16" 1-3/8" 1/4" FH
SED 041610-1 10" 1-7/8" 3-5/8" 1-3/4" 5/16" FH
SED 041612-1 12" 2-1/8" 3-3/4" 1-7/8" 5/16" FH
Heavy Duty:
SED 041708 8" 2" 3-5/16" 1-3/4" 1/4" FH
SED 041710 10" 2-3/8" 3-3/4" 1-7/8" 5/16" FH
Marine HardwareS/S Hollow Base CleatsManufactured in 316 S/S and polished for extremely bright nish. 100,000 pounds of tensile strength. Holes machine drilled and are counter sunk for at or oval head fasteners.
8" cleat, height: 1-3/4"•Uses 1/4" F.H. fasteners•
MHI SSCL66010
10" cleat, height: 2"•Uses 5/16" F.H. fasteners•
MHI SSCL66011
Marine Hardware Stainless Steel CleatsHighly polished investment cast 316 S/S cleats for mega yacht application. Euro style.
Uses 5/16" fasteners•MHI SSCL66012-4HE 12”MHI SSCL66015-4HE 15”MHI SSCL66018-4HE 18”
Sea-Dog Open Base Cleat
Die cast zinc, chrome plated•These cleats are interchangeable with Perko style 1188 cleats•
Part # A B C D Fastener
SED 044604-1 4" 1-1/4" 1-1/2" 1-1/16" #10 FH
SED 044606-1 6" 1-9/16" 2-1/4" 1-3/16" #10 FH
SED 044608-1 8" 1-13/16" 3-1/4" 1-7/16" 1/4" FH
SED 044610-1 10" 2" 4" 1-11/16" 1/4" FH
Sea-Dog Closed Base Cleats
Polished cast brass•Part # A B C D Fastener
SED 042103-1 3-3/16" 13/16" 11/16" 9/16" #6 FH
SED 042104-1 4" 1" 3/4" 1-11/16" #12 FH
SED 042105-1 5" 1-1/4" 1" 1-15/16" #12 FH
Sea-Dog Line Cleats
Made from polished cast brass•Part # A B C D Fastener
SED 672110-1 2-1/2" 1/2" 1/2" 1" #6 FH
SED 672115-1 4-1/16" 3/4" 11/16" 1-1/2" #8 FH
Sea-Dog Low Pro le S/S Cleats
Investment cast 316 stainless steel•Part # A B C D Fastener
SED 041906-1 6" 1-1/4" 2-1/16" 1-5/8" 1/4" FH
SED 041908-1 8" 1-11/16" 2-1/4" 1-5/8" 1/4" FH
EXTERIO
R H
AR
DW
AR
E243Cleats
Sea-Dog 4-Hole Cleats
Die cast zinc chrome plated•Part # A B C D Fastener
SED 044104-1 4-1/2" 1-1/16" 1-3/4" 1-3/16" #8 FH
SED 044106-1 6" 1-3/8" 2-3/16" 1-9/16" #10 FH
Perko Streamline Cleats
Chrome plated zinc. 2 per card•Part # Length Base Size Max Line
PER 566-DP2-CHR 2" 2-3/16" x 1-1/8" 5/16"
PER 566-DP3-CHR 3" 3-1/8" x 1-1/2" 3/8"
PER 566-DP4-CHR 4-1/2" 4-7/16" x 1-7/8" 1/2"
Perko Chrome Cleats
Chrome plated zinc/black plastic•Closed base type•
Length Base Max Line Fastener Qty
PER 1305-DP1-CHR4-1/2" 3-3/4" x 1-1/16" 3/8" #10 2/card
PER 1305-DP2-CHR 6" 5" x 1-3/8" 1/2" 1/4" 1/card
Perko Chrome Cleats
Chrome plated zinc/black plastic•Open base type•
Length Base Max Line Fastener Qty
PER 1306-DP1-CHR4-1/2" 2-1/2" x 1-1/16" 3/8" #10 2/card
PER 1306-DP2-CHR 6" 3-1/2" x 1-3/8" 1/2" 1/4" 1/card
Attwood Hollow Base Cleats
Die-cast ZAMAK with dual nickel •and chrome plating. 2 per card
Part # Length Fasteners
ATT 6244-6 4-1/2" #8
ATT 6245-6 6" #10
Perko Chrome Open Base CleatChrome plated zinc with black plastic base. New streamlined appearance.
Length: 5-3/4"•Base: 3-5/8" x 7/8"•Max rope size: 1/2"•Uses 1/4" fasteners•
PER 1326-DP2-CHR
Perko Open Base Cleats
Chrome plated zinc•Stainless steel 1/4" x 2" studs, nuts & washers •
Part # Length Base Dimension Max Line
PER 1210-004-CHR 4" 2-1/8" x 1-1/2" 5/16"
PER 1210-006-CHR 6" 3" x 1-3/4" 7/16"
Perko Cast Aluminum Cleats
Plain aluminum nish•
Part # Length Base SizeMax Line
Screw Size
PER 530-008-ALU 8" 4" x 2-1/4" 3/4" 1/2"
PER 530-010-ALU 10" 4-1/2" x 3" 7/8" 1/2"
PER 530-012-ALU 12" 6-1/2" x 2-7/8" 1" 5/8"
Perko Cast Aluminum Cleats
Plain aluminum nish•
Part # Pack Base Size LMax Line
Screw Size
Closed Base
PER 545-DP3-ALU 2/CD 1-1/2" x 5/8" 3" 1/4" #8
PER 545-DP4-ALU 2/CD 1-5/8" x 3/4" 4" 5/16" #10
PER 545-DP5-ALU 2/CD 2" x 7/8" 5" 3/8" 1/4"
Open Base
PER 545-DP8-ALU 1/CD 2-5/8" x 1-7/8" 8" 5/8" 1/4"
► Also See: Dock Cleats pg 856-857
244
EXTERIO
R H
AR
DW
AR
E
Cleats / Chocks
Forespar Marelon Cleats
Molded from high-strength Marelon® for strength, light weight and low cost. The use of Marelon® allows these cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion - will not soften on hot days or freeze in winter.
Part # Length Hole Dia
FRS 941018 3" 5/32"
FRS 941016 4" 3/16"
FRS 941013 5" 3/16"
FRS 941014 6-1/2" 1/4"
FRS 941015 8" 1/4"
Sea-Dog Nylon Open Base Cleats
Injection molded nylon•Part # A B C D Fast
Black
SED 043030 3" 1-1/16" 1" 1-5/8" #6 FH
SED 043030-1* 3" 1-1/16" 1" 1-5/8" #6 FH
SED 043040-1* 4" 7/8" 1-1/8" 2" #8 FH
SED 043050 5" 1-1/16" 1-7/16" 2-1/2" #10 FH
SED 043080-1* 8" 1-11/16" 2" 3-3/8" 1/4" FH
* 2/CD
White
SED 043031 3" 1-1/16" 1" 1-5/8" #6 FH
SED 043041 4" 7/8" 1-1/8" 2" #8 FH
SED 043051 5" 1-1/16" 1-7/16" 2-1/2" #10 FH
Sea-Dog Aluminum Cleats
Sand cast aluminum•Part # Length Height Fastener Style
SED 046106-1 6" 1-3/8" 1/4" FH Closed base
SED 046108-1 8" 1-7/8" 5/16" FH Open base
SED 046110 10" 2-1/4" 3/8" FH Open base
Sea-Dog Zinc Skene ChockDie cast zinc, chrome plated •Sold in pairs•Uses #10 FH fasteners•
SED 064030-1
Sea-Dog Stainless Steel Bow ChockInvestment cast 316 stainless •Sold in pairs•Uses #10 FH fasteners•
SED 060040-1
Sea-Dog Stainless Steel Straight Chocks
Investment cast 316 stainless•Sold by the each•
Part # A B C D Fast
SED 060200-1 5" 3/4" 1-1/16" 3-15/16" #10 FH
SED 060210-1 6" 1" 1-13/16" 5" 1/4" FH
Sea-Dog Nylon Heavy Duty Cleats
Injection molded nylon•2 per card•
Part # A B C D Fast
SED 043340-1 4-1/4" 1" 1-1/4" 1-3/4" #10 FH
SED 043360-1 6-1/16" 1-1/4" 1-9/16" 2-1/4" #6 FH
SED 043380-1 8-1/16" 1-3/4" 2-1/4" N/A #8 FH
Marine East Nylon CleatStrong black nylon cleat is UV resistant.
Length 3.420" x Height 0.78"•MEP 2100
► Also See: Clam Cleats pg 769
EXTERIO
R H
AR
DW
AR
E245Chocks / Hawse Pipes / Deck Pipes
Sea-Dog Nylon Skene Chock
Injection molded black nylon•Sold in pairs•
Part # A B C D Fast
SED 067360-1 4-1/2" 7/16" 1/2" 3-5/8" #10 FH
Sea-Dog Stainless Steel Skene Chocks
Investment cast 316 stainless•Sold in pairs•
Part # A B C D Fast
SED 060060-1 4-1/2" 13/16" 11/16" 3-15/16" #10 FH
SED 060065-1 6" 1-1/8" 13/16" 4-5/8" 1/4" FH
Perko Mooring BitChrome plated bronze hollow mooring bit.
Uses 1/4" bolt fasteners•4-1/4" x 4-1/4" x 3-1/2"•
PER 608-002-CHR
Sea-Dog Hawse PipeInvestment cast 316 stainless steel•L: 9-1/4" x W: 2-7/8"•Uses #10 FH fasteners•
SED 328170
Sea-Dog Hawse PipeInvestment cast 316 stainless steel•L: 5-1/2" x W: 2-1/2" x D: 7/8"•Uses #10 FH fasteners•
SED 328160
Perko Hawse Hole PlateCast bronze, chrome plated •Spigot: 1-1/4" •Outside dimensions: 4-1/4" x 6"•Inside dimensions: 2-1/8" x 4-1/8"•Uses #1/4" fasteners•
PER 752-000-CHR
Perko Rope Deck PipeChrome plated zinc•For rope up to 1" diameter •Flange diameter: 3-3/8"•Uses #8 fasteners•
PER 757-DP-CHR
Perko Plastic Rope Deck PipesFibre reinforced, U.V. stabilized plastic deck pipe with a hinged, snap-down cover.
For ropes up to 7/8"•Flange diameter: 3-3/4"•Use #8 screws•
PER 1057-DP-BLK Black PER 1057-DP-WHT White
Sea-Dog Rope Deck PipeChrome plated brass•For rope up to 1" diameter•Dia: 3-1/8" x Centre: 1-1/2" •Uses #8 FH fasteners•
SED 322080-1
Sea-Dog Stainless Steel Hinged Deck PipeInvestment cast 316 stainless, hinge prevents loss of cap.
Uses #10 FH screws•L: 5-5/8" x W: 4-1/16" x Centre:2-3/4"•
SED 321805
Sea-Dog Stainless Steel Chain Deck PipeInvestment cast 316 stainless, comes with cap tether and cap securing hook.
Uses #10 FH screws•L: 5-5/8" x W: 4-1/16" x Centre: 2-1/2"•
SED 321800Parts:
SED 321810-1 Cap & chain
Sea-Dog Chrome Brass Chain Deck PipeComes with cap tether chain, cap securing hook, and rubber gasket.
For maximum 3/8" chain and 1" rope•L: 6-1/4" x W: 4-1/2" x Centre: 2-1/4"•Uses #8 FH fasteners•
SED 322070Parts:
SED 322075-1 Replacement cap and chain only
246
EXTERIO
R H
AR
DW
AR
E
Deck Fills
Perko Chrome Locking Gas Cap
Locking caps come with 2 keys •Fits Perko 0520, 0527, 0528, 0557, 0599 & 1270 •series lls
PER 1324-DP1-BLK Spare locking cap Perko Combination Fill and Tank VentsPlastic, ip top ll incorporates an integral tank vent with ame arrester. Fuel splash back returns down the ll neck instead of overboard when
lling. With the lid closed continuous venting is provided while effectively preventing water intrusion. All plastic construction eliminates the need for installation of ground wire.
Uses #10 FH fasteners•PER 1318-DPG-BLK Black gas 35° angled neckPER 1319-DPG-BLK Black gasPER 1319-DPW-BLK Black waterPER 1319-DPG-WHT White gas
Accessories:Fuel system locking insert for 1-1/2” vented lls
Black plastic with zinc alloy lock cylinder •Dual purpose key opens ll cap & locking insert •Fits most Perko vented lls•
PER 525-DP0-BLK
Perko Deck Fills For HoseChrome plated bronze. Fill type marked on ange. Cap has slot between holes, O-ring and integral retainer. Comes with deck key.
Fits 1-1/2" I.D. hose •Flange diameter: 3-1/8"•Length neck: 3-1/2"•Uses #8 FH fasteners•
PER 520-DPD-CHR DieselPER 520-DPG-CHR GasPER 520-DPW-CHR WaterPER 507-DP-CHR Waste (No retainer on cap)
Parts:PER 520-DP-99A Spare cap and O-ringPER 513-DP8 Spare O-rings 2/pkgPER 507-DP-99A Spare waste cap & O-ringPER 1324-DP1-BLK Spare locking cap
Perko Deck Fills For HoseChrome plated zinc. Fill type marked on ange and cap. Black plastic caps have a slot between holes, O-ring and integral retainer. Comes with deck key.
Fits 1-1/2" hose•Flange diameter: 3-1/2"•Length neck: 2-1/2"•Uses #8 FH fasteners•
PER 1270-DPD-CHR DieselPER 1270-DPG-CHR GasPER 1270-DPW-CHR WaterPER 1269-DP-CHR Waste (No retainer on cap)
Parts:PER 1269-DP-99A Cap only (Waste)PER 1270-DPG-99A Cap only (Gas)PER 1270-DPW-99A Cap only (Water)PER 1270-DPD-99A Cap only (Diesel)PER 513-DP8 Spare o-ring, 2/pkg
Perko Plastic Gas FillBlack plastic, bre reinforced, U.V. stabilized. Easy-grip cap comes with O-ring and integral retainer. No deck plate key required.
Takes 1-1/2" I.D. hose•O.D. 3-1/16"•Length neck 2-7/16"•
PER 1613-DP-BLKParts:
PER 513-DP8 Spare o-ring, 2/pkg
Perko Fuel Fill Locking InsertJust open the ll cap, insert lock cylinder, remove the key and replace the cap. Comes with 2 dual purpose lock/deck keys.
Fits most Perko vented lls•PER 525-DP0-BLK
Perko Fuel Fill Replacement Cap
Replacement cap and O-ring ts Perko 528 •series 1-1/2" fuel/water lls for pipe.
PER 528-DP8-99A CapPER 513-007 O-ring 2/pkg
Perko Chrome Locking Gas CapLocking caps come with 2 keys •Fits Perko 1313 & 1399 series lls & Mirax •M-79 & Tempo 109 DPF lls
PER 1324-DP0-BLK Spare locking cap
Chrome Locking Gas Fill
Same as above but with locking feature.Uses #6 FH fasteners•
PER 1399-DP-CHR Gas
Parts:PER 1324-DP0-BLK Spare locking cap
Perko Chrome Deck FillsChrome plated zinc and black plastic, impervious to fuel. Complete with grounding lug and screw. Cap has integral retainer and has a gasket to assure water tightness.
Overall diameter: 3-1/8"•Hose size: 1-1/2•
PER 1313-DP-CHR GasPER 126-DP-BLK Spare Cap
EXTERIO
R H
AR
DW
AR
E247Deck Fills
Perko Combination Gas Fill & Tank VentsAngled head deck ll combined with the tank vent. Vent ame arrester and anti-surge valve. Requires deck plate key and #8 fasteners. Use with approved 1-1/2" fuel ll and 5/8" vent hose.
Uses #8 FH fasteners•PER 540-DPG-CHR Chrome cap & plastic basePER 542-DPG-BLK Black plastic cap & basePER 542-DPG-WHT White plastic cap & base
Parts:PER 540-DPG-99A Spare chrome cap with chainPER 525-DP0-BLK Lock
Attwood "Indy" Stainless Steel Gas FillContemporary high-performance style deck ll designed especially for high-performance-oriented cruisers and run-a-bouts. Low-pro le, highly-polished cast 316 stainless steel. Spring-loaded hinged cap.
Hose size: 1-1/2" •3-1/4" x 4-1/2" x 1" H above deck •Installation hole size: 1-7/8"•
ATT 66344-1
Marelon Deck FillsMolded in high-strength non-corrosive Marelon® for lifetime durability. Deck lls are available in three colour-coded models. Each clearly marked for use with either water, fuel or waste. Easy-open cap is tted with nylon retaining cord and rubber O-ring to ensure a safe and ef cient seal. Hose: 1-1/2"
Flange: 4", Cutout: 2-1/8", Length: 3"•MPS 907002 FuelMPS 907003 WaterMPS 907004 Waste
Whitecap Push-Up Deck Fills316 Stainless steel construction deck lls have a unique pop-up key for cap removal. Colour coded and imprinted to international standards. For 1-1/2" hose with a 3" ange. Uses #10 screws.WHI 6993C GasWHI 6994C DieselWHI 6995C WaterWHI 6996C Waste
WhitecapPush-Up Replacement CapStainless steel replacement cap with 'hiding push key' ts most standard 1-1/2" deck lls.WHI 6961C
Sea-Dog Gas Deck FillGas deck ll with splash guard•Die cast chrome plated zinc•Fitting for 1-1/2" hose•Use #10 FH fasteners•
SED 351750-1Parts:
SED 351755-1 Replacement cap
Sea-Dog Stainless Steel HoseDeck Fills
Comes with cap, safety chain •Investment cast 316 •Use #10 fasteners•
Part # Hose Barb Marking Flange Dia.
SED 351320-1 1-1/2" Gas 3"
SED 351321-1 1-1/2" Diesel 3"
SED 351322-1 1-1/2" Water 3"
SED 351323-1 1-1/2" Waste 3"
SED 351330 2" Gas 3-1/2"
SED 351331 2" Diesel 3-1/2"
Parts:SED 351390-1 Replacement cap (1-1/2")SED 351392-1 Replacement cap (2")SED 351399-1 Deck plate key
Sea-Dog Stamped S/S Deck FillFemale threads to accept 1-1/2" pipe •thread ttingsFlange diameter is 3-1/4" •Use #8 FH fastener•
SED 351261 DieselSED 351264-1 Waste
Wren Stainless Steel Deck FillsThese llers have no threading thus eliminating galling from dirt, sand etc. They also have a key lock for security. 316 Stainless steel.
Bayonet twist action with ‘pop up’ cap•Double sealed with water drain•Flush tting into deck with no visible xing •when closed
WRE D11621 2" 2" Diesel WRE WS11621 2" 2" WasteWRE W11621 2" 2" Water
Sea-Dog Locking Stainless Steel Deck FillsInvestment cast 316 stainless steel •Includes 2 keys •1-1/2" hose •#10 FH fasteners•1-1/4" cap threads•
SED 351320L-1 GasSED 351321L-1 Diesel
248
EXTERIO
R H
AR
DW
AR
E
Deck Fills
Sea-Dog Cast Stainless Steel Deck Fills With Keyless CapsThese investment cast 316 stainless deck
lls have a special cap with a built in key for quick and easy removal. The hinged key can be locked in the upright position to open or close the ll and then recess into the cap for a ush surface. Caps are molded in special colours to prevent accidental, dangerous and costly tank contamination. For use with 1-1/2" I.D. hose.
Uses #10 FH fasteners•Part # Marking Cap
SED 351310-1 Gas Red
SED 351311-1 Diesel Green
SED 351312-1 Water Blue
SED 351313-1 Waste Black
Replacement Caps:SED 357090-1 Red gas cap onlySED 357091-1 Green diesel cap onlySED 357093-1 Blue water cap onlySED 357094-1 Black waste cap only
Buck Algonquin Pipe Deck PlatesFurnished with beaded chain, cap and spanner key. Cast bronze with machined brass nish. 1-1/2" and 2" sizes come complete with O-ring seal.
Uses #10 FH fasteners•Part # Finish Marked
BUC ORING-125 O-Ring ts all 125 deck plates
Pipe size 1-1/2". Flange diameter 3-3/4"
BUC PDP 150MF-PLN Machine Plain
BUC PDP 150MF-GAS Machine Gas
BUC PDP 150MF-FUEL Machine Fuel
BUC PDP 150MF-WTR Machine Water
BUC PDP 150MF-WSTE Machine Waste
BUC PDP 150MF-DIE Machine Diesel
BUC ORING-150 O-Ring ts all 150 deck plates
Pipe size 2". Flange diameter 4-5/8"
BUC PDP 200MF-PLN Machine Plain
BUC PDP 200MF-GAS Machine Gas
BUC PDP 200MF-FUEL Machine Fuel
BUC PDP 200MF-WTR Machine Water
BUC PDP 200MF-WSTE Machine Waste
BUC PDP 200MF-DIE Machine Diesel
BUC ORING-200 O-Ring ts all 200 deck plates
Note: Spare Caps OnlyBUC PDPC-125-MF 1-1/4" machineBUC PDPC-150-MF 1-1/2" machineBUC PDPC-200-MF 2" machine
Sea-Dog Keyless Cap Deck FillsThese breglass lled nylon deck
lls have a special cap with a built in key for quick and easy cap removal. The hinged key can be locked in the upright position to open or close the ll and then recessed into the cap for a ush surface. Caps are molded in special colours to prevent accidental, dangerous and costly tank contamination. For use with 1-1/2" I.D. hose.
Uses #10 FH fasteners•Part # Marking Cap Body
SED 357030-1 Gas Red Black
SED 357031-1 Diesel Green Black
SED 357033-1 Water Blue Black
SED 357034-1 Waste Black Black
SED 357020-1 Gas Red White
SED 357023-1 Water Blue White
SED 357024-1 Waste Black White
Replacement Caps:SED 357090-1 Red gas cap onlySED 357091-1 Green diesel cap onlySED 357093-1 Blue water cap onlySED 357094-1 Black waste cap only
Sea-Dog Fibreglass Nylon Deck Fills
For use with 1-1/2" I.D. hose•Flange diameter: 3-5/16"•Comes with safety chain•Use #10 fasteners•
Part # Marking Cap
SED 357000-1 N/A Body Only Black
SED 357010-1 Gas Red
SED 357011-1 Diesel Green
SED 357013-1 Water Blue
SED 357014-1 Waste Black
Replacement Caps:SED 357015-1 Cap & chain for gas unitSED 357016-1 Cap & chain for diesel unitSED 357017-1 Cap & chain for water unitSED 357018-1 Cap & chain for waste unit
EXTERIO
R H
AR
DW
AR
E249Deck Plates / Deck Plate Keys
Buck Algonquin Stainless Steel Pipe Deck Plates
Investment cast 316 stainless steel, polished to a mirror nish. Furnished with bead chain, cap and spanner key. With O-ring seal.Uses #10 FH fasteners
Part # Pipe Marked Flange
BUC PDPS 150-GAS 1-1/2" Gas 3-3/4"
BUC PDPS 150-WTR 1-1/2" Water 3-3/4"
BUC PDPS 150-DIE 1-1/2" Diesel 3-3/4"
BUC PDPS 150-PLN 1-1/2" Plain 3-3/4"
BUC PDPS 150-WSTE 1-1/2" Waste 3-3/4"
BUC PDPS 200-DIE 2" Diesel 4-5/8"
BUC PDPS 200-PLN 2" Plain 4-5/8"
BUC PDPS 200-GAS 2" Gas 4-5/8"
Note: Spare caps onlyBUC PDPS-150C-S/S 1-1/2" stainless steelBUC PDPS-200C-S/S 2" stainless steel
Perko Safety CordPrevents loss of deck plate caps. 24" mono lament.PER 537-DP
Attwood Stainless Steel Replacement CapWith threads for 1-1/4" straight pipe deck
lls. Fits Attwood #'s 66406, 66407, 66408 and 66408C1.ATT 66074-3 Replacement cap
and chain
Davis Deck Plate KeyThis handy, pocket size, deck plate key is made of hardened 301 marine grade stainless steel. Positive
t eliminates damage to plastic or metal deck plates. Fits hole spacing: 1.06"(27 mm), 1.19"(30 mm), and 1.44"(37mm). Fits slots: 1.125"(28 mm) and larger.DIN 381
Sea-Dog Deck Fill KeyMade from injection molded nylon. Distance between teeth 1-3/16".SED 357399-1 Black
Perko Deck Plate KeyFits Perko 1-1/4" and 1-1/2" deck plates and many other “slot” type opening deck plates. Rugged black plastic.PER 1247-DP-BLK
Perko Deck Plate Key
Part #Lug
Centres LengthPlateSize Finish
PER 1248-006-DP 5/8" 3-3/8" 1" Zinc
PER 1248-7-8-DP 1-1/8" 3-3/8" 1-1/2" Plastic
PER 1248-009-DP 1-11/16" 4-3/8" 2" Zinc
Sea-Dog Adjustable Deck Plate KeyOpens to a maximum of 6" and comes with two sizes of stainless steel pins, 3/16" and 5/16" allowing it to t most plates or caps. If desired, you can add a lanyard. Made from satin nished bronze.SED 335680-1
Sea-Dog Universal Deck Plate KeyStamped 304 stainless steel. Fits deck plates with holes or slots. Easily opens shackles, bottles and slotted fasteners.SED 335690-1
Sea-Dog Deck Plate KeyMade from formed 304 stainless, 7" overall. Fits all cast stainless steel Sea-Dog deck ll caps: 351320 - 351331 and 351350 - 351353 and deck plates: 335633 - 335646. Plus ts other brands of deck plates and deck lls. SED 335699-1 CardedSED 335699 Bulk
Perko Deck Plate KeyChrome plated zinc. Heavy duty - will
t up to 8" diameter plates.Overall length 8-1/2"•
PER 826-DP-CHR
EXTERIO
R H
AR
DW
AR
E251Rail Fittings
Sea-Dog 7/8" Base Rail Fittings (Chrome Plated Die Cast Zinc)
Part # Description Tube OD Base Fastener
SED 286030-1 30° Round base 7/8” 2-5/8" #10 FH
SED 286060-1 60° Round base 7/8” 2-5/8" #10 FH
SED 286090-1 90° Round base 7/8” 2-5/8" #10 FH
SED 286130-1 30° Rectangular base 7/8” 1-5/8" x 2-3/4" #10 FH
SED 286160-1 60° Rectangular base 7/8” 1-5/8" x 2-3/4" #10 FH
SED 286190-1 90° Rectangular base 7/8” 1-5/8" x 2-3/4" #10 FH
Includes 1/4-28 x 3/16” set screws
286030
286060
286090
286130
286190286160
Sea-Dog 7/8" Hand Rail Fittings (Chrome Plated Die Cast Zinc)
Part # Description Tube OD Rail Height Fastener
SED 286560-1 60° Center 7/8” 2-1/8" #10 FH
SED 286565-1 60° End-left hand 7/8” 2-1/8" #10 FH
SED 286566-1 60° End-right hand 7/8” 2-1/8 #10 FH
SED 286955-1 5-1/2” Blend base 7/8” - #10 FH
SED 286290-1 Bullet end 7/8” - #10 FH
Includes 1/4-28 x 3/16” set screws
286560 286565 286566
286955286290
Sea-Dog Round Base Rail Fittings (Investment Cast 316 Stainless Steel)
Part # Description Tube OD Base OD Fastener
SED 280300-1 30° Round base 7/8” 2-5/8" #10 FH
SED 280301-1 30° Round base 1” 2-3/4" 1/4“ FH
SED 280450-1 45° Round base 7/8” 2-5/8" #10 FH
SED 280451-1 45° Round base 1” 2-3/4" 1/4“ FH
SED 280600 60° Round base 7/8” 2-5/8" #10 FH
SED 280600-1 60° Round base 7/8” 2-5/8" #10 FH
SED 280601-1 60° Round base 1” 2-3/4" 1/4“ FH
SED 280900-1 90° Round base 7/8” 2-5/8" #10 FH
SED 280901-1 90° Round base 1” 2-3/4" 1/4“ FH
Includes 1/4-28 x 3/16” set screws
280300 280450
280900280600
Sea-Dog 7/8" Rail Tee Fittings (Chrome Plated Die Cast Zinc)
Part # Description Tube OD
SED 296090-1 90° Tee 7/8”
SED 296095-1 90° Elbow 7/8”
SED 296160-1 60° Tee-left hand 7/8”
SED 296260-1 60° Tee-right hand 7/8”
SED 296510-1 110° Bow form 7/8”
Includes 1/4-28 x 3/16” set screws
296090
296095296510
296260296160
252
EXTERIO
R H
AR
DW
AR
E
Rail Fittings
Sea-Dog Stanchion Fittings (Investment Cast 316 Stainless Steel)
Part # Description Tube OD Eye Dia.
SED 270500-1 Stanchion eye 1” 1/2”
SED 270510-1 Stanchion cap 7/8” 5/16”
SED 270511-1 Stanchion cap 1” 5/16”
Includes 1/4-28 x 3/16” set screws 270500 270510
Sea-Dog Hand Rail Fittings (Investment Cast 316 Stainless Steel)
Part # Description Tube OD Rail Height Fastener
SED 285060-1 60° Center 7/8” 1-13/16” #10 FH
SED 285061-1 60° Center 1” 2-3/16” 1/4“ FH
SED 285065-1 60° End left-hand 7/8" 1-13/16" #10 FH
SED 285120-1 120° End 7/8” 1-13/16” #10 FH
SED 285121-1 120° End 1” 2-3/16” 1/4“ FH
SED 285160 60° End 7/8” 1-13/16” #10 FH
SED 285160-1 60° End 7/8” 1-13/16” #10 FH
SED 285161-1 60° End 1” 2-3/16” 1/4“ FH
SED 285165-1 60° End left-hand 7/8” 1-13/16” #10 FH
SED 285166-1 60° End right-hand 7/8” 1-13/16” #10 FH
SED 288290-1 Bullet end 7/8” N/A N/A
SED 289900-1 90° End-bottom mounted 7/8” 1-7/8” 1/4“ Bolt
SED 289901-1 90° End-bottom mounted 1” 2” 1/4“ Bolt
SED 289905-1 60° Center-bottom mounted 7/8” 1-7/8” 1/4“ Bolt
Includes 1/4-28 x 3/16” set screws
285060
285120
289905
289900
285160
288290
Sea-Dog Rectangular Base Rail Fittings (Investment Cast 316 Stainless Steel)
Part # Description Tube OD Base Fastener
SED 281300-1 30° Rectangular base 7/8” 1-3/4” x 2-5/8” #10 FH
SED 281301-1 30° Rectangular base 1” 1-7/8” x 3-3/16” 1/4" FH
SED 281450-1 45° Rectangular base 7/8” 1-11/16” x 3” #10 FH
SED 281451-1 45° Rectangular base 1” 1-7/16” x 3-1/4” 1/4" FH
SED 281600-1 60° Rectangular base 7/8” 1-3/4” x 3-1/16” #10 FH
SED 281601-1 60° Rectangular base 1” 1-7/8” x 3-1/4” 1/4" FH
SED 281900 90° Rectangular base 7/8” 1-11/16” x 3” #10 FH
SED 281900-1 90° Rectangular base 7/8” 1-11/16” x 3” #10 FH
SED 281901-1 90° Rectangular base 1” 1-7/8” x 3-3/16” 1/4" FH
SED 281931-1 90° Base 1” 2-1/16” x 3” 1/4" FH
SED 281936-1 90° Base 1” 3-11/16” x 3-3/8” 1/4" FH
Includes 1/4-28 x 3/16” set screws
281300 281450
281600 281900
281936
Suf x (-1) indicates display package.
EXTERIO
R H
AR
DW
AR
E253Rail Fittings
Sea-Dog Rail Tee Fittings (Investment Cast 316 Stainless Steel)
Part # Description Tube OD
SED 290600-1 60° Universal tee 7/8”
SED 290601-1 60° Universal tee 1”
SED 290900-1 90° Tee 7/8”
SED 290901-1 90° Tee 1”
SED 291600-1 60° Tee left-hand 7/8”
SED 291601-1 60° Tee left-hand 1”
SED 292600-1 60° Tee right-hand 7/8”
SED 292601-1 60° Tee right-hand 1”
SED 293100-1 3-Way corner 7/8”
SED 293101-1 3-Way corner 1”
SED 293131-1 4-Way corner 1”
Includes 1/4-28 x 3/16” set screws
290600 290900
293131293100
Sea-Dog Elbow Fittings (Investment Cast 316 Stainless Steel)
Part # Description Tube OD Degree
SED 293190-1 90° Cable anchor 7/8” N/A
SED 293191-1 90° Cable anchor 1” N/A
SED 295090-1 90° Elbow 7/8” N/A
SED 295091-1 90° Elbow 1” N/A
SED 295095-1 Elbow & anchor eye 7/8” N/A
SED 295096-1 Elbow & anchor eye 1” N/A
SED 295110-1 Bow form 7/8” 110°
SED 295111-1 Bow form 1” 110°
SED 295125-1 Bow form 7/8” 125°
Includes 1/4-28 x 3/16” set screws
293190
295090
295110
Sea-Dog Handrail/Lifeline Fittings (Investment Cast 316 Stainless Steel)
Part # Description Tube OD Base Pin Dia. Fastener
SED 270530-1 Stanchion sleeve w/ eye 7/8” N/A 3/8” N/A
SED 270531-1 Stanchion sleeve w/ eye 1” N/A 3/8” N/A
SED 270540-1 4° Rectangular base 1” 2-13/16” x 3-9/16” N/A 1/4" FH
SED 270550-1 Lifeline base N/A 2-7/16” x 1-1/2” 3/8” #10 FH
Includes 1/4-28 x 3/16” set screws
270540
270550
270530
Sea-Dog Stanchions & End Fittings (Investment Cast 316 Stainless Steel)
Part # Description Tube OD Rail Height Fastener
SED 289155-1 5-1/2° Rail (end in) N/A 7/8” #10 FH
SED 289165-1 16-1/2° Rail (end out) N/A 7/8” #10 FH
Includes 1/4-28 x 3/16” set screws 289155
254
EXTERIO
R H
AR
DW
AR
E
Rail Fittings / Tubing / Hand Rails
Stainless Steel Rail Tubing600 grit buffed and polished nish•Standard length 20 feet•Type 304 S/S•Available in two sizes •Sold by the foot•
WES 7/8"S/S 7/8" OD x .049 wall thicknessWES 1"S/S 1" OD x .065 wall thickness
TACO Aluminum Tubing
Bright anodized nish, .058" wall.TAC A233458BLY20 3/4" OD, 20' lengthTAC A237858BLY12 7/8" OD, 12' length
AFI Stainless Steel HandrailsQuality pre-made stainless steel handrails make a great addition to any boat. They provide an extra margin of safety and convenience.
Using 1/4"fasteners•Display packaged•
AFI 74212 12"AFI 74218 18"AFI 74224 24"
Attwood Flexible Grab HandlesConstructed of soft black polypropylene webbing over a semi rigid core. U.V. stable and mildew resistant.
7-1/2' grip opening •Uses 4 x #12 screws•
ATT 2061-5Sea-Dog Stainless Hinged Rail Tee FittingsHinged feature allows installation without disassembling existing Bimini setup. Also reduces possibility of scratching tubing during installation since it does not need to slide into place.SED 290603-1 60° Hinged universal tee 7/8"SED 290604-1 60° Hinged universal tee 1"SED 290903-1 90° Hinged tee 7/8"SED 290904-1 90° Hinged tee 1"
Perko Grab Rail PostsChrome plated bronze. For 1" O.D. tubing.
Height: 3-3/8"•Base diameter: 2-1/2"•Uses #8 FH fasteners•
PER 380-000-CHR End postPER 380-A00-CHR Centre post
Sea-DogRail Mount Hose and Cable BracketThis stainless steel bracket is designed to hold water hoses, shore power cords, phone lines, etc. The stainless steel retaining clip also prevents dock lines and rigging from accidentally getting caught in the bracket.
2" W x 5-3/4" H x 1-1/8" D•SED 327115-1
Sea-Dog Rail Mount Brackets
Injection molded nylon and stainless steel. Designed to clamp easily to 7/8" - 1" tubing. Fasteners are included.SED 327100-1 1 pr. brackets SED 327101-1 1 pr. brackets, and 2 oval platesSED 327102-1 1 pr. brackets, and 2 square plates
Transat Stainless Rail Fitting Rectangle Base - Bulk
TMS Q30035 90° 7/8”TMS Q30036 90° 1”TMS Q30053 60° 7/8”TMS Q30054 60° 1”
Transat Stainless Rail Fitting Round Base - Bulk
TMS Q30038 90° 7/8”TMS Q30039 90° 1”TMS Q30047 60° 7/8”TMS Q30048 60° 1”
Transat Stainless Stanchion Cap - Bulk
TMS Q30022 7/8”TMS Q30023 1”
Transat Stainless 3-Way Corner Fitting - Bulk
TMS Q30020 7/8”TMS Q30021 1”
Transat Stainless Stanchion Eye - BulkTMS Q30017 7/8” w/ eye TMS Q30018 1” w/ eye
Transat Stainless 60° Rail Tees - Bulk
TMS Q30057 60° 7/8”TMS Q30058 60° 1”
Transat Stainless 90° Elbows - Bulk
TMS Q30063 7/8”TMS Q30064 1”
Transat Stainless 90° Rail Tees - Bulk
TMS Q30059 7/8”TMS Q30060 1”
EXTERIO
R H
AR
DW
AR
E255Hand Rails / Boat Top Fittings
Sea-Dog Bimini StrapNylon/stainless/chrome plated brass.
1" x 8', black•SED 298172-1 Pair
TACO Slide Track14 foot lengths •
TAC A520037BLY14
Star brite Clear Plastic Window SaverSimple and easy to install•Stops sun heated rails from burning plastic •windows
STA 88578 7/8" STA 88510 1"
Sea-Dog Injection Molded Rail Top Fittings
Part # Description Colour Tube OD Pin Qty
SED 273100-1 Top cap Black 7/8” 1/4" Pair
SED 273101-1 Top cap White 7/8” 1/4" Pair
SED 273110-1 Top cap Black 3/4” 1/4" Pair
SED 273111-1 Top cap White 3/4” 1/4" Pair
SED 273160-1 Jaw slide Black 7/8” 3/16" Pair
SED 273161-1 Jaw slide White 7/8” 3/16" Pair
SED 273162-1 Hinged top slide Black 7/8” 1/4" Each
SED 273165-1 Jaw slide Black 3/4" 3/16" Pair
SED 273166-1 Jaw slide White 3/4" 3/16" Pair
SED 273175-1 Top insert Black 3/4" 1/4" Pair
SED 273176-1 Top insert White 3/4" 1/4" Pair
SED 273180-1 Top insert Black 7/8" 1/4" Pair
SED 273181-1 Top insert White 7/8" 1/4" Pair
273100
273110273160
273162273180273175
Sea-Dog Hand RailsStud mount•3/4" OD tube•Rail height: 2"•Investment cast 316 stainless steel•
SED 254112-1 12”SED 254118-1 18”SED 254124-1 24”
Sea-Dog Top Slide KitsTop Slide Kits - .85 TrackEnables easy storage of bimini tops. Each kit includes 2 x Tracks, 1 x starboard side deck hinge slide, 1 x port side deck hinge slide and 4 x end cap covers.SED 298318-1 18" - BlackSED 298418-1 18" - WhiteSED 298336-1 36" - BlackSED 298436-1 36" - White
Head screw.SED 273568 Pair
Injection molded black nylon slide bracket.SED 273665-1 Pair
Sea-Dog Canvas Top Fittings
Injection molded black nylon bracket mount jaw slide.SED 273565-1 Pair
Sea-Dog Injection Molded Track Fittings
Part # Description Colour Width Length Qty Fastener
SED 273213-1 .85 Track end cap stop Black 7/8” 1-1/4" Pair #8 FH
SED 273220-1 .85 Track slides Black 11/16” 2-3/8" Pair -
273220273213
256
EXTERIO
R H
AR
DW
AR
E
Boat Top Fittings
Sea-Dog Injection Molded Head Screws & ConnectorsSold in pairs•
Part # Description Colour Width Length
SED 273298-1 Head screw 1/4-20 x 7/8” Black 7/8” 1-3/8”
SED 273299-1 Head screw 1/4-20 x 7/8” White 7/8” 1-3/8”
SED 273308-1 Head screw 1/4-20 x 1/2” Black 13/16” 15/16”
SED 273309-1 Head screw 1/4-20 x 1/2” White 13/16” 15/16”
SED 273301 Tube connector 7/8” White 7/8” 2-1/4”
Suf x (-1) indicates display package.
Sea-Dog Injection Molded Hinge FittingsSold in pairs•Uses #10 FH fasteners•
Part # Description Colour Width Length
SED 273250-1 Deck hinge Black 7/8” 2-7/16"
SED 273251-1 Deck hinge White 7/8” 2-7/16"
SED 273260-1 .85 Slide mount Black 7/8” 2-1/4”
SED 273261-1 .85 Slide mount White 7/8” 2-1/4”
SED 273265-1 1.050 Slide mount Black 1” 2-1/4”
SED 273266-1 1.050 Slide mount White 1” 2-1/4”
SED 273295-1 .85 Track slide lock Black 11/16” 13/16”
1/4" Pin
273251
273295
273261
273265
Sea-Dog Injection Molded Hinge Fittings, 3/16" PinSold in pairs•
Part # Description Colour Width Length
SED 273200-1 Large deck hinge Black 13/16” 2-7/16"
SED 273201-1 Large deck hinge White 13/16” 2-7/16"
SED 273205-1 Small deck hinge Black 13/16” 2-3/8”
SED 273206-1 Small deck hinge White 13/16” 2-3/8”
SED 273230-1 Large deck hinge/angled Black 7/8” 2-7/16"
SED 273231-1 Large deck hinge/angled White 7/8” 2-7/16"
SED 273240-1 Concave deck hinge Black 13/16” 2-7/16"
SED 273286-1 Deck hinge slide Stbd & Prt White 7/8" 2-7/16"
Use #10 FH screws
273200
273240
273205
273230
273286
Sea-Dog Injection Molded Canvas Top FittingsSold in pairs•
Part # Description Colour Tube OD* Hole Space Fastener
SED 273350-1 90° Inside eye end Black 3/4” - -
SED 273351-1 90° Inside eye end White 3/4" - -
SED 273369-1 90° Inside eye bracket Black N/A 15/16" #8 FH
SED 273370-1 90° Inside eye bracket White N/A 15/16” #8 FH
273351
273369
EXTERIO
R H
AR
DW
AR
E257Boat Top Fittings
Sea-Dog Investment Cast 316 Stainless Steel Top FittingsSold by the each•
SED 299999-1 1/4-28 x 3/16" set screws (Set of 10)
Part # Description Tube OD Pin
SED 270100 Top cap 7/8" 1/4"
SED 270100-1 Top cap 7/8" 1/4"
SED 270101-1 Top cap 1” 1/4”
SED 270102 Top cap 1-1/4” 1/4”
SED 270111-1 Top cap heavy duty 1” 5/16”
SED 270160-1 Top slide with bolt 7/8” 1/4”
SED 270161-1 Top slide with bolt 1” 1/4”
SED 270162 Top slide with bolt 1-1/4” 1/4”
SED 270165-1 Top slide with bolt 3/4" 1/4”
SED 270166-1 Hinged top slide with bolt 7/8” 1/4”
SED 270175-1 Top insert 3/4" 1/4”
SED 270180-1 Top insert 7/8” 1/4”
Includes 1/4-28 x 3/16” set screws
Suf x (-1) indicates display package.
270100
270101
270111
270160
270162
270175
Sea-Dog Investment Cast 316 Stainless Steel Hinge FittingsSold by the each•
Parts:SED OP27002-1 S/S replacement hinge pinSED 299980-1 Lanyard with stepped release pinSED 299981-1 Lanyard with straight release pinSED 299999-1 1/4-28 x 3/16" set screws (Set of 10)
Part # Description Base Pin Fastener
SED 270200 90° Deck hinge 3/4" x 2-1/4” 1/4” #10 FH
SED 270200-1 90° Deck hinge 3/4" x 2-1/4” 1/4” #10 FH
SED 270205-1 90° Deck hinge - heavy duty 1” x 2-1/16” 5/16” 1/4" FH
SED 270210-1 90° Deck hinge - removable pin 3/4" x 2-1/4” 1/4” #10 FH
SED 270230-1 Angle back deck hinge 3/4" x 2-1/4” 1/4” #10 FH
SED 270240-1 Concave base deck hinge 3/4" x 2-1/4” 1/4” #10 FH
SED 270245-1 Concave base deck hinge - removable pin 3/4" x 2-1/4” 1/4” #10 FH
SED 270250-1 Side mount deck hinge 7/8” x 2” 1/4” #10 FH
SED 270255-1 Side mount deck hinge - heavy duty 1-7/8” x 2-13/16” 5/16” 1/4" FH
SED 270260-1 Adjustable angle deck hinge - heavy duty 1” x 2-3/4” N/A #10 FH
Suf x (-1) indicates display package.
270200270205 270210 270230 270240 270245
270250
270260
270255
258
EXTERIO
R H
AR
DW
AR
E
Ladders
Garelick Fold-Down LadderFolds down into water for easy boarding. Mounts on 6-1/2" x 12" area. Unique attaching brackets enable ladder to t most angled or curved transoms. Improved self-locking, folding hinge. Tube rail can be cut and moved for proper t. Featuring durable 1" diameter aluminum tubing. All aluminum parts are anodized. Non-slip comfortable modi ed oval-shaped anodized aluminum steps. Strap locks ladder in up position. All fasteners are stainless steel. GAR 18017 2-Step, 15" fold-downGAR 18018 3-Step, 25" fold-down
Sea-Dog Telescoping LaddersStainless steel construction•Gudgeon mount•Comes with securing strap •Width: 8-3/4"•
SED 328202 2 Step, 23-3/8"SED 328203 3 Step, 34-3/8"
AFI Swim Platform BracketsStainless steel. Sold individually.AFI 60995 9"H x 17"L x 1-1/2"WAFI 60996 14"H x 21-1/2"L x 1-1/2"W
AFI Poly Platform With Telescoping LadderAll stainless steel telescoping •two-step ladderWhite poly swim platform for boats •with O/B motorsPlatform kits are easy to assemble •using pre-marked and pre-drilled holesMolded platform manufactured •of UV resistant, high-strength polypropyleneAnti-skid ribs and textured surface molded onto platform•All tubing, brackets and hardware are stainless steel•Telescoping ladder easily stores on top of platform•Platform: 18" W (back), 17" W (front), x 15" D x ¾" thick•
AFI 67904 Windline Underdeck Ladders
These underdeck ladders come complete with bracket mounts and quick lock straps. Electro-polished stainless steel with plastic treads. Slides under platform for compact storage.
Part # Style Open Stowed
WIN UP-2X 2 step 26" 17"
WIN UP-3X 3 step 37" 18"
Windline Telescoping Drop Ladder
Mounts and stows on top of •the swim platform. 3 stainless steel steps with a comfortable plastic pads. Thick-wall stainless tubing. Telescoping steps drop quickly and easily into the water. Length stowed: 14.5"•Length deployed: 34"•Width: 12.5"•
WIN TDL-3X
Windline Under Platform Telescoping Slide Mount LadderStainless steel steps slide under the platform for stowage. Requires a minimal amount of depth, fore and aft. Includes quick lock nylon strap.
Three step•Length deployed: 35.0"•Length stowed: 15.0"•Height stowed: 2.5"•Overall width: 12.5"•
WIN SM-3X
Garelick Swim Platform/LadderFor use on outboard transoms•One stainless wrap around rail and one •undersideDurable, platform is easy to clean•Stainless steel hardware•13" L x 14-1/2" W x 12.5" D•
GAR 19535
For use on outboard transoms•One stainless wrap around rail and one •support railDurable, platform is easy to clean•Ladder slides up and under platform for •storageStainless steel hardware•18" W x 15-1/2" D x 22-3/4" L•
GAR 19536
For use on inboard/outboard transoms•Two stainless wrap around rails (no lower •leg)Durable, platform is easy to clean•Stainless steel hardware•13" L x 14-1/2" W x 12-1/2" H•
GAR 19545
EXTERIO
R H
AR
DW
AR
E259Ladders
Windline Removable Pontoon LadderIntegrated 11" swim handles, plastic steps for comfort and it folds for compact storage. Four steps.
Length deployed: 46.5"•Length stowed: 28.0"•Height stowed:5.0"•Overall width: 16" •
WIN TDL-4E
Garelick Deluxe Series LaddersFeature comfortable and sturdy white traction molded steps. Durable 1" diameter aluminum tubing. Thick vinyl covered hooks will not mark hull's nish. All aluminum adjustable standoffs with cushioned tips for correct t. Hooks and standoffs fold at for compact storage. Recommended for persons up to 175 pounds.
Part # Steps H x W Hook
GAR 05031 3 36" x 15" 11"
GAR 05037 3 36" x 15" 7"
GAR 05041 4 48" x 15" 11"
Garelick Latch Type LadderDesigned for small cruisers, Run-a-bouts or sail boats, with unusual gunwales where a hook type ladder is not practical. Attaches easily with 1 pair of Model 76000 Shur-Loc catches provided. Durable 1" diameter aluminum tubing with comfortable and sturdy white traction molded plastic steps. All aluminum adjustable standoffs with cushioned tips for correct t.
Length: 56" (including 13" over rail hook)•GAR 10049
Garelick Shur-Loc Ladder CatchesDesigned to mount on hull or deck for attaching Garelick boarding ladders. Allows for either permanent or temporary mounting. Made of sturdy stainless steel with unique self locking design.
2-1/2" x 1-3/4"•GAR 76000
Garelick In atable Boat LadderContour design hugs hull for side boarding and attaches to oor board with a 3/8" line and swivel snap. Vinyl sleeves will not mar hull material.
33" x 13.5"•GAR 13003 3-step ladder
Sea-Dog Emergency Folding LaddersThese Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 pounds. Steps are spaced at 1' 6" and are 11-3/4" wide.SED 582502-1 4-steps, 2'5" longSED 582503-1 3-steps, 1'6" long
Davis Instruments Swim StirrupThe Swim Stirrup® has been carefully engineered to provide safe, easy access to small boats for swimmers or water skiers. Durable, reliable design attaches to gunwales, transoms, or open bows. Easy to install, easy to use and it oats.
Perfect for rowboats, ski boats, •dinghies, sail boats Adjustable length to t your boat •Complete hardware and instructions included •
DIN 1466
► Also See: Dock Ladders pg 856
Garelick Ladder StandoffsBoarding ladder standoffs, as used on traction molded plastic and traction grooved oak style steps. Includes poly tips, screws and nuts. Can be cut for exact length desired. Sold in pairs.
Length: 4-1/2"•GAR 99000 Standoffs
Whitecap Boarding Ladder
Made of 304 stainless steel •Push button lock feature:•
Separates handle for storageAllows for 2 boarding positions
Tube diameter 1-1/2"•Overall height 45-1/2" •Handle width: 12"•Fits any standard rod holder•
WHI S-6242
260
EXTERIO
R H
AR
DW
AR
E
Ladders
Garelick Sport/Diver LaddersAngled design for stair-like ease of boarding•Centre vertical allows easy use with diving gear•Oval steps with nonskid surface•Quick release mounting bracket with lock for •easy storageHeavy duty - rated to 400 lbs. boarding weight•Transom mounting bracket and ladder storage •brackets included
GAR 19803 3 steps x 13", 38" lengthGAR 19804 4 steps x 13", 48" length
Garelick Folding Gull Wing Step Ladders
Black reinforced nylon steps fold "parallel" in •unison and lock upQuick release mounting bracket with built-•in angle adjustment and breakaway feature includedCentre vertical allows easy use with diving •gearDual stainless steel centre rails •Heavy duty- rated to 400 lbs boarding weight•
Part # Description Stowed Open
GAR 19853 3 steps 4" x 4" x 47" 44" x 15"
GAR 19854 4 steps 4" x 4" x 57" 57" x 15"
Folded
Garelick Sport/Diver Ladder Mounting BracketUse this additional bracket for multiple mounting locations on boat. Mounted on 1" thick poly spacer with 100 angle and lock and stainless steel face plate mounting bracket.
2.75" W x 3.62" H •Mounting hole diameter: 5/16"•
GAR 99180
Garelick Sport/Diver Ladder MountsGarelick transom mounting extrusion shim. Extends ladder further from the transom. Used with face plate and 10 degree poly spacer included with ladder. Made of stainless steel.
2.75" W x 3.62" H•GAR 99181 2"GAR 99184 3"
Great for any dog you want to take out in the water. It provides an easy entrance/exit.
Portable, lightweight and durable •Easy to attach and remove from any boat ladder •Reduces pain and strain for pets and owners •Measures 16" x 64" and folds in half for easy storage•
PAW 5200
Paws Aboard Boarding Ladder
When stowed this ladder ts fully within the transom of the boat. The only component visible during storage is the faceplate and locking/release mechanism. Pull the release pin, slide the ladder out of the storage tube and fold out the molded steps. Semi-automatic function with all steps folding out on common side at once. All aluminum construction with plastic steps.GAR 19902-34 3-StepGAR 19902-44 4-Step
StowedStep
Garelick Integrated Transom Ladders
EXTERIO
R H
AR
DW
AR
E261Steps
Sea-Dog Folding Step
Chrome plated cast brass. SED 322620-1
Sea-Dog Deck Steps
Part # A B C Fastener
SED 328012-1 2-1/4" 8-3/8" 7-11/16" #8 FH
SED 328017-1 Replacement pad for 328012
SED 328013-1 3-3/8" 8-7/8" 8-3/16" #8 FH
Perko Step PlatesChrome plated zinc frame•Black molded soft plastic pad •Uses #8 FH fasteners•
PER 1325-DP1-CHR 8-3/4" x 3-1/4", 2/pkg
Chrome plated bronze frames•Black molded plastic pads •
PER 1043-DP1-CHR 8-3/4" x 3-1/4", eachPER 1043-DP2-CHR 11-1/2" x 5-3/4", each
Spare pads:PER 1050-DP1-BLK For 1325-1/1043-1, 2/pkgPER 1050-DP2-BLK For 1043-2, 2/pkg
Perko Step PlateChrome plated brass frame with soft black plastic tread insert. 2/pkg
7-1/4" x 1-1/2" •Uses #8 FH fasteners•
PER 1015-DP-CHR
Buck Algonquin Flying Bridge Ladder StepsMade from anodized high tensile aluminum. 11.5o ladder angle.
Step size: 3" x 17"•BUC ST170088 7/8" tube O.D.BUC ST1700100 1" tube O.D.
Perko Folding StepCast bronze, chrome plated construction. Stainless steel spring holds step in open or closed position.
Step size: 4-1/8" x 2-1/4"•Base size: 4-1/4" x 1-3/4"•Folded projection 1-3/8"•Uses 5/16" RH fasteners•
PER 344-DP-CHR
Sea-Dog Aluminum Folding Mast Step
Made from polished #356 T-6 aluminum and nished with clear anodizing. This step sticks out only 1-1/2" from the mast when not in use.
Step has 5" tread width •Uses 1/4" fasteners•
SED 328030-1
Perko Boarding StepCast bronze chrome plated.
Step size: 6" x 4-1/4"•Mount bracket size: 6" x 2"•Uses 5/16" RH fasteners•
PER 351-DP-CHR
Injection molded nylon, these step handles can be used as a lift on small boat transoms and since they are molded with a contoured handle grip, the at, textured upper surface also allows it to be used as a step.
Use #10 RH fasteners•SED 227260-1 BlackSED 227261-1 White
Sea-Dog Step Handles
Sea-Dog Folding Step
304 stainless steel. Unique design locks steps in a rattle-free upright position when not in use. In the down position, the 4-1/4" long step provides secure footing when working on the mast. Use #10 PH.SED 328025-1
262
EXTERIO
R H
AR
DW
AR
E
Non-Slip
LifeSafe Traction StripsTextured vinyl helps reduce the risk of slipping. For safer footing everywhere… steps, ladders, ramps, basement stairs, boats, trucks, trailers, farm equipment, decks, skateboards, pools,docks, diving boards and campers.
Part # Size Colour Qty
LIF RE3902WH 1" x 12" White 10
LIF RE3923GR 2" x 12" Gray 6
LIF RE3924WH 2" x 12" White 6
LifeSafe Anti-Slip Grit StripsDurable in wet or dry conditions. Pre-cut, self-adhesive strips are easy to use, simply peel and stick. Improves footing on frames during cleaning, maintenance and boat launching.
6 per pack•LIF RE3892BL 2" x 12" Black
LifeSafe Traction TapeTextured vinyl helps reduce the risk of slipping. LIF RE3954 2" x 15' GreyLIF RE3955 2" x 15' White
LifeSafe Anti-Slip Grit TapesDurable in wet or dry conditions. Self-adhesive rolls are easy to use, simply cut, peel and stick. Improves footing on frames during cleaning, maintenance and boat launching. Black in colour.LIF RE36028 1" x 15'LIF RE36029 2" x 15'
LifeSafe Traction Tape DisplayMetal counter top display facilitates the selling of product by the foot. Comes complete with the following anti-slip product in white:1 Roll - 1” x 60 ft1 Roll - 2” x 60 ft1 Roll - 4” x 60 ftLIF MR3960 Display
3M Safety-WalkLight DutyFine textured, clear or white safety walk is recommended for use on boat decks, around pools, tubs and showers. Helps to coordinate a light nonskid surface with any colour substrate.
Length per roll: 60'•THR 59502-7743 1" WhiteTHR 59503-7744 2" WhiteTHR 59500-7745 4" White
THR 59498-7751 1" ClearTHR 59499-7752 2" ClearTHR 59496-7753 4" Clear
Heavy DutySurfacing has a diamond hard mineral surface for extra traction. It is designed for use around areas of heavy traf c.
Black in colour •Length per roll: 60'•
THR 59514-7731 1" x 60 ftTHR 59515-7732 2" x 60 ftTHR 59512-7733 4" x 60 ft
General PurposeSafety-Walk consists of aluminum oxide abrasive particles bonded by a tough, durable polymer to a dimensionally stable plastic lm. Backing is coated with a pressure sensitive adhesive covered by a removable protective liner.
Length per roll: 60'•THR 19224 6" - Black
Medium GradeSimilar to the above product but made from a high friction medium grade resilient, slip resistant surface.
Length per roll: 60'•THR 19296 4" - BlackTHR 19297 6" - BlackTHR 19321 1" - GreyTHR 59507-7740 2" - GreyTHR 59504-7741 4" - GreyTHR 19324 6" - Grey
EXTERIO
R H
AR
DW
AR
E263Flags / Flag Holders
Paws Aboard FlagsAttention-grabbing boat ags include the Dog Paw and Dog Bone ags.
19" x 11" •PAW 4100 Paw print agPAW 4200 Bone ag
Taylor Made Boating FlagsSewn nylon ags with brass grommets are 12” x 18”.TAY 240 Jolly Roger pennantTAY 1818 Jolly Roger agTAY 3718 Fishing agTAY 9118 Cocktail agTAY 9218 Beer agTAY 9818 Margarita Time ag
Scythes FlagsCanadian made and screen printed on standard weight nylon. Individually packaged in heat sealed polyethylene bags.
SCY USA-18x9"SCY USA-24x12"SCY USA-36x18"SCY USA-54x27"SCY USA-72x36"
SCY BC-18x9"SCY BC-24x12"SCY BC-36x18"SCY BC-54x27"SCY BC-72x36"
SCY CDN-18x9"SCY CDN-24x12"SCY CDN-30x15"SCY CDN-36x18"SCY CDN-54x27"SCY CDN-72x36"SCY CDN-90x45"
Scythes Ingle eld ClipsAll zinc die-cast clips sold as sets.SCY 16-411004
Du-Bro Flag ClipsMade of stainless steel and spring loaded to hold on securely at speeds up to 65 mph.DUB 1500 Flag clips 2/pkgDUB 1501 Antenna ag clips 2/pkgDUB 1502 E/Z on ag clips 2/pkg
Taylor Made Charlevoix Flag ClipsThis simple one piece clip attaches semi-permanently to your pole and will keep your
ag securely in place at speeds up to 50 miles per hour. Flags can be attached or removed in seconds. The clips can also be removed, if desired.TAY 57926 3/4" PoleTAY 57928 7/8" to 1" Poles
ITT Skipper ClipsStainless steel utility fasteners•Set of 4•
ITT 34560-0000
Whitecap Wood FlagpoleIncludes (2) brass screws •Varnished mahogany•L: 18" x Dia: 3/4" •
WHI S-5006
Whitecap S/S FlagstaffRail mount agstaff •304 S/S staff and black nylon •bracket Diameter 1/2" x Length 17" •Bracket 7/8" and 1" tube•
WHI S-5010
Whitecap S/S FlagstaffClamp-on agstaff pole •Pole: 304 S/S •Clamp 316 S/S •Diameter 1/2" x Length 17" •Clamp tube 7/8" •
WHI S-5011
Perko Flag StaffsAnodized aluminum tube and chrome plated zinc base. Complete with o-ring seal. 3/4" base will t Perko 1218, 1265 bow lights and 1302 ag pole socket.
Part # Length Base Dia
PER 495-DP1-CHR 14" 1/2"
PER 495-DP2-CHR 14" 3/4"
PER 495-DP3-CHR 18" 3/4"
264
EXTERIO
R H
AR
DW
AR
E
Flag Holders
Perko Flag Pole Sockets
Upright style socket•Chrome plated bronze•Uses #8 F.H. or O.H. screws•
Part # lnside Dia Dia Flange
PER 220-DP1-CHR 3/4" 2-1/8"
PER 220-DP2-CHR 1" 2-1/2"
PER 220-DP3-CHR 1-1/4" 2-3/4"
Perko Flag Pole SocketClamp on socket is designed for mounting on a 3/4"- 1" railing. Chrome plated zinc with a black plastic knob.
Socket inside diameter: 3/4"•PER 1302-DP-CHR
Taylor Made S/S Flag PolesThis deluxe ag pole set features highly polished stainless steel from top to bottom. The staff is made from 1" 304 stainless steel. The nial and base are cast 304 stainless steel. The unique
ag clips are cast from 304 stainless steel which holds your ag taut so your ag is never tangled.TAY 902 18"TAY 903 24"TAY 904 30"TAY 905 36"TAY 907 48"
Taylor Made Rail Mount Flag SocketsDesigned to securely fasten to either 7/8”- 1” or 1-1/8” - 1-1/4” rails, these stainless steel mounts will look great and provide years of service. Both models are perpendicular to the rail and are made for 1” diameter ag poles.TAY 973 7/8" to 1" railsTAY 974 1-1/8" to 1-1/4" rails
Sea-Dog Flag Pole Sockets
Angled design stern socket in chrome plated sand cast brass.
Part # A B C Fastener
SED 492211-1 3/4" 2" 1-3/4" #6 FH
SED 492212-1 1" 2-1/2" 2" #6 FH
SED 492213-1 1-1/4" 2-3/4" 2-1/8" #6 FH
Sea-Dog Flush Mount Flag Pole Socket
Investment cast 316 S/S•Use #12 F.H. screws•
SED 491713-1
Perko Flag Pole SocketsFlush mount design in chrome plated bronze. Available in 2 styles and 3 sizes. Use #8 F.H. or O.H. screws.
Part #lnsideDia.
FlangeDia.
PER 218-DP1-CHR 3/4" 2"
PER 219-DP1-CHR 3/4" 2"
PER 218-DP2-CHR 1" 2-3/8"
PER 219-DP2-CHR 1" 2-3/8"
PER 218-DP3-CHR 1-1/4" 2-5/8"
PER 219-DP3-CHR 1-1/4" 2-5/8"
218
219
Sea-Dog Rail Mount FlagpoleMade from 304 S/S and injection moulded nylon.
Length: 15-1/2" •SED 327120-1
Sea-Dog Adjustable Rail Mount FlagpolesMade from 304 S/S, injection moulded nylon and polypropylene. Attach to 7/8" or 1" tubing.SED 327122-1 17"SED 327124-1 30"
Sea-Dog Bow Form FlagpoleFits bow forms with 1/2" diameter ag pole mounting holes. Comes with split rings for easy ag attachment.
Length: 13-3/16"•SED 328110-1
Sea-Dog Rail Mount Flagpole HolderMade from 304 S/S and injection moulded nylon. Flagpole holder will accept any
agstaff with a 3/4" base diameter.( agstaff not included)
Length: 4-5/8"•SED 327121-1
Sea-Dog Pulpit FlagpoleFits 7/8" - 1" tubing and comes complete with fasteners and split rings for easy ag attachment.
Length: 15-1/2"•SED 328115-1
EXTERIO
R H
AR
DW
AR
E265Bilge Blowers
Jabsco/PAR 4" Bilge BlowersTough, corrosion proof reinforced plastic housing. Reliable automotive type motor for long life and low current operation. 4" intake. Air ow: 250 CFM. Available in 12 or 24 volts.
H: 9" x W": -3/4" x L: 8-3/4"•ITT 35400-0000 12VITT 35400-0010 24V
Jabsco/PAR 4" Continuous Duty Bilge BlowersFlange mount•250CFM•Minimum 10,000 hour motor•H: 9-1/8" x W: 8-3/16" x L: 8"•
ITT 35760-0092 12V, 11 ampITT 35760-0094 24V, 6 amp
Electrohome 3" Bilge Blower12 volt/8 amp. ABS plastic housing. 3 inch intake pipe. Air ow 100 CFM. Flange mount allows discharge port to be fastened directly to a at external surface to minimize required ducting.WES MB-125Optional mounting bracket allows an "in-line" installation of bilge blower. Bracket may be rotated to permit installation in any direction.WES BB101A
Sea-Dog 3" Bilge Blower12V, 3 amp•ABS construction•100 cubic feet per minute •Uses 1/4" fasteners•
SED 435210
Delta 'T' Marine LIL' Champ 4" BlowersFlow rates to 350 CFM •Performs well even under static •pressure loadsHigh-impact marine grade plastic •housing Internally mounted motor for compact •design Sealed D/C direct-drive motor. The •motor is a totally enclosed (TEAO), double-shielded, ball bearing type, which is constructed with die cast aluminum end plates, O-ring seals, stainless steel shaft and tough black Te on epoxy coating for superior corrosion resistance. Armatures are dynamically balanced for quiet, vibration-free operation)Dynamically balanced armatures for quiet vibration-free •operation Includes universal powder coated bracket for a wide variety of •mounting options Slim pro le H: 10" x W: 4.43" x D: 11.5"•
DTS 500-304121-IP 12V DTS 500-304242-IP 24V
Parts:DTS 505-201251 Hose adapter for intake
Jabsco/PAR 3" Flexmount Bilge BlowerTough, corrosion proof reinforced plastic housing. Reliable automotive type motor for long life and low current operation. Unit can be rotated in the mounting bracket to facilitate installation. 3" intake. Air ow: 105 CFM.
5-1/2" H x 5" W x 6-3/4" L•ITT 35515-0010 12 volt, 4.3 amp
Part # Volts Hose Size CFM Amp Draw Size
Standard
ATT 1731-4 12 3" 120 2.6 3"
Water-resistant
ATT 1733-4 12 3" 120 2.6 4"
ATT 1745-1 24 4" 200 1.9 4"
Size A x B x C x D
3" 3-5/8" x 4-1/2" x 5-1/16" x 3"
4" 4-17/32" x 5-1/2" x 6-1/16" x 4"
Attwood Inline Turbo Bilge BlowersHigher system air ow and lower amp draw. Tough, corrosion-proof ABS housing dampens sound and vibration. Features include a smaller, more compact straight-thru design, integral mounting bracket and hose retention tabs. Scienti cally designed ve-blade fan features a nose cone and specially cambered stator vanes.
► Also See: Blower Hose pg 564
266
EXTERIO
R H
AR
DW
AR
E
Bilge Blowers / Vents
Attwood Collector BoxesBlack Polystyrene plastic construction for corrosion free service. Designed for air intake or exhaust. Takes 3" hose.
ATT 1341-1 For model 1494 and 1425 ventsBox cavity measures 15/16" W x 15-7/16" L x 4" D•
ATT 1345-1 For model 1495 ventBox cavity measures: 2-3/16" W x 16" L x 3-15/16" D•
ATT 1348-1 For model 1438 and 1439Box cavity measures: 2-3/46" W x 18" L x 5" D •For 4" hose•
Sea-Dog ABS Collector Boxes
Vacuum formed ABS plastic, available in right and left hand versions for 3 and 4" hose. Depth: 5"
Part # Hose A B Use W/Vent Mount
SED 331293 3" 12-1/4" 3-5/8" 331290337290
Right
SED 331294 4" 12-1/4" 3-5/8" 331290337290
Right
SED 331296 3" 12-1/4" 3-5/8" 331290337290
Left
SED 331298 4" 12-1/4" 3-5/8" 331290337290
Left
SED 331303 3" 7-1/4" 3-5/8" 331300 Left
Attwood Modular Vents
Modular construction allows these patented vents to accommodate any ventilation opening size by interlocking two or more centre sections. End sections interlock to the centre section for a nished appearance. The A.B.S plastic will not corrode or discolour.ATT 1438-F1 Centre whiteATT 1439-F1 End white
Attwood Louvred Vent
Made from rugged ABS plastic •Installation hole: 2-1/4" x 16-1/8"•L: 17-7/8" x W: 3-7/16" x D: 3/4"•
ATT 1495-1 Off-WhiteATT 1495-A1 Black
Attwood Flush Louvred VentCanted louvres de ect rain and spray and help conceal the duct. Vent can be painted to match boat gelcoat. ASA plastic UV stable, will not discolour.
Use #8 screws•2-3/4" W x 17-9/16" L x 1/4" H•
ATT 1425-5 White
Attwood Venturi VentsMade of rugged ABS plastic, will not discolour or corrode.
Width: 2-3/4" x Length: 17" x Height 11/16"•Installation hole: 2-1/8" x 15-1/2"•
ATT 1494-5 ChromeATT 1494-A5 BlackATT 1494-F1 White
Rule Inline Bilge BlowersDesigned for ef cient, high output operation, these blowers offer front and rear seals and corrosion resistant motor housing for long life. Mounts on any at surface.
Part # Size Volts C.F.M. Amps
RUL 140 3" 12 135 2.9*
RUL 240 4" 12 235 4.3*
*Rated at 13.6 volts
AttwoodTurbo 4000 Series Inline BlowersUtilizing advanced fan blade design techniques, these blowers match air ow of existing in-line blowers at a signi cantly reduced noise level. For added durability, Attwood incorporates an engineered plastic housing that resists deformation during installation and prevents blade to housing interference.ATT 1747-4 4" 12V blowerATT 1749-4 4" 12V water resistant blower
EXTERIO
R H
AR
DW
AR
E267Vents
Sea-Dog Slotted VentilatorMade of ABS plastic•5 louvre engine vent•L: 13-1/4" x W: 4-3/4" x D: 1-1/6"•
SED 337290 WhiteSED 337291 Black
Sea-Dog Louvred 8 Slot Vents
Stamped 316 stainless steel•Use #6 R.H. screws•L: 16-3/8" x W: 2-7/8" x D: 7/8"•
SED 331200
Sea-Dog Slotted Ventilators
Stamped 316 Stainless Steel. Use #6 R.H. screws.Part # A B C D Louvers
SED 331290-3 3-5/8" 12" 4-1/2" 12-7/8" 5
SED 331300 3-5/8" 7-1/8" 4-1/8" 8-1/8" 3
Sea-Dog Louvred VentilatorsMade of injection molded ABS plastic.
L: 17-1/2" x W: 2-5/8" x D: 1-7/8"•SED 337210-1 WhiteSED 337211-1 Black
Sea-Dog Stainless Steel Louvred Vents
304 stamped S/S•Use #6 RH screws•
Part # A B
SED 331380-1 5" 2-5/8"
SED 331390-1 5" 4-5/8"
SED 331400-1 9-1/8" 4-5/8"
SED 331410-1 5" 9"
Perko Louvred Ventilators
Chromed brass•Screw size #4 R.H •
Part # Size Louver Length
Horizontal x 2
PER 334-002-DP 3" x 2-1/2" 2"
PER 334-004-DP 5-1/2" x 2-1/2" 2"
PER 334-006-DP 8" x 2-1/2" 2"
Horizontal x 3
PER 335-006-DP 5-1/2" x 3" 2"
PER 335-009-DP 8" x 3" 2"
PER 335-09A-DP 11" x 3-1/2" 3"
Vertical x 1
PER 336-05A-DP 5-3/8" x 4" 3"
PER 336-06A-DP 6-3/8" x 4" 3"
334 335 336
Sea-Dog Louvred Vents
Injection molded ABS plastic•Use #8 FH screws•
Part # Colour
Cutout Overall
A B C D
SED 337400-1 Black 3-11/16" 9" 4-7/8" 10-1/8"
SED 337401-1 White 3-11/16" 9" 4-7/8" 10-1/8"
Sea-Dog Louvred Vent
Injection molded black ABS plastic•Use #8 FH screws•
Part #
Cutout Overall
A B C D
SED 337500 2-15/16" 6-7/8" 3-7/8" 7-7/8"
268
EXTERIO
R H
AR
DW
AR
E
Vents
Perko Chrome Cowl VentilatorChrome plated zinc with a black •plastic baseFor 3" duct•Opening square inches: 8" •5-3/4" L x 4-3/8" W x 2-5/8" H•
PER 1312-DP-CHR
Perko Cowl VentilatorChrome plated zinc for 3" duct•Opening square inches: 7-1/3" •5-1/4" L x 4" W x 2-3/4" H•
PER 870-CHR
Sea-Dog Screened Vents
304 S/S construction•Use #10 FH fasteners•
Part # A B C D
SED 331712 8-5/16" 2-1/4" 7-11/16" N/A
SED 331713 8-13/16" 3-3/8" 8-3/16" 2-3/4"
Sea-Dog Locker VentStamped 304 S/S•Use #8 RH fasteners•6-3/4" L x 2-3/8" W•
SED 331620-1
Perko Transom or Locker VentilatorChrome plated brass •7" x 2-1/2"•
PER 550-DP-CHR
Perko Transom or Locker VentilatorChrome plated zinc•Grill type screen • 6" x 2"•
PER 1271-DP-CHR
Perko Transom or Locker VentilatorChrome plated zinc•Grill type screen•8-3/8" x 2-1/4"•
PER 1238-DP-CHR
Attwood Cowl VentilatorFor use with 3" I.D. ventilation hose. Features exible hose ange that is screwed onto base, then vent snaps onto the ange. Constructed of chrome-plated die-cast Perma-Plate ZAMAK. Flange is plastic. Use #8 screws.
Length: 6" x Width: 5-5/16" x Height: 2-1/4"•ATT 1364-A1
Perko VentilatorChrome plated brass frame•Perforated stainless steel screen •7-1/4" L x 1-1/2" W•
PER 707-DP-CHR
Sea-Dog Stainless Steel Midget Vents
Stamped 304 Stainless Steel. Uses #6 RH fasteners.Part # A B C Package
SED 331360 1-5/8" 1-3/4" 1/2" Bulk
SED 331360-1 1-5/8" 1-3/4" 1/2" Display
SED 331370 2-1/4" 2-1/8" 5/8" Bulk
SED 331370-1 2-1/4" 2-1/8" 5/8" Display
Gemlux S/S Clamshell Vents
Stainless steel heavy duty .80 thickness.Part # Height Width Depth Fastener
GEM 330839-2 7/8" 1/2" 1-5/8" #4
GEM 330851-1 9/16" 2" 2" #6
Perko Clam Shell Ventilators
Chrome plated brass•Part # Length Width Height
PER 315-DP1-CHR 1-5/8" 1-1/2" 7/16"
PER 315-DP2-CHR 2" 2" 9/16"
Perko Clam Shell VentilatorChrome plated brass •Base dimension: 4" x 3-3/4"•1-5/8" H x 2-1/2" W•
PER 339-DP-CHR
EXTERIO
R H
AR
DW
AR
E269Vents
Sea-Dog Nylon Hose Vents
Injection molded ABS•Use #8 FH screws•
Part # A B C Hole
Black
SED 337325 2-13/16" 2-7/16" 3-5/8" 3"
SED 337425 3-9/16" 3" 4-15/16" 4"
White
SED 337315 2-13/16" 2-7/16" 3-5/8" 3"
SED 337415 3-9/16" 3" 4-15/16" 4"
Sea-Dog Hose Thru Vents
Injection molded polypropylene•Use #8 FH screws•
Part # Colour A B C Hole
SED 337310 White 2-13/16" 5/8" 3-5/8" 3"
SED 337320 Black 2-13/16" 5/8" 3-5/8" 3"
ITC S/S Clad VentsHighly polished stainless steel clad cover plate over plastic base vents are available in 3” (3.25” cutout) & 4” (4.25” Cutout) diameters. Each features the patented press- t that grips the cutout hole and eliminates the need for fasteners. ITC 81932SS-HP-D 3"ITC 81933SS-HP-D 4"
Perko Locker VentilatorsChrome plated brass•Use #6 R.H. fasteners •
PER 330-DP1-CHR 2-1/2" DiaPER 330-DP2-CHR 3-1/4" Dia
Sea-Dog Flush Vents
Injection molded ABS plastic •Use #8 FH screws•
Part # A B C Hole
Black
SED 337326-1 2-13/16" 2-3/4" 3-5/8" to 3"
SED 337426-1 3-9/16" 3-3/4" 4-15/16" to 4"
White
SED 337316-1 2-13/16" 2-3/4" 3-5/8" to 3"
SED 337416-1 3-9/16" 3-3/4" 4-15/16" to 4"
Sea-Dog Deck Drain/Locker Vents
ABS plastic•Use #10 FH fasteners•
SED 340021-1 4-3/16" diameter, WhiteSED 340041-1 5-5/8" diameter, WhiteSED 340020-1 4-3/16" diameter, Black
Sea-Dog Half Shell Vent Covers
Formed 304 stainless steel construction. Vent covers t part number SED 331424 and SED 331425 round vents. They also can be used as nger pulls. Use #6 RH fasteners.
Part # A B C
SED 331464 4" 2-3/16" 9/16"
SED 331465 5" 2-9/16" 7/8"
Sea-Dog Stainless Steel Clam Shell Vents
Stamped 304 Stainless Steel. Bulk. Uses #6 RH screws.Part # A B C
SED 331340 7" 5-3/4" 2-1/4"
SED 331350 7-1/2" 6-3/4" 2-7/8"
Beckson VentilatorsVacuum-formed white ABS air scoops with white KORAD® cap to prevent cracking or discolouring.
1-1/2" H x 5-1/2" W x 7" D•BEC C-4
270
EXTERIO
R H
AR
DW
AR
E
Vents
Nicro Airvent 500The Air Vent 500 is an economical passive exhaust vent that moves a high volume of air. ABS construction with a frosted polycarbonate centre panel which also allows light down below. This vent will move 600-1000 cubic feet of air per hour in a 15 knot breeze. It has a locking shut-off damper operated from below. The low pro le vent screws directly to the deck. Height: 1-3/4”, Dia: 7”, and uses a 3-3/4” cut out hole.NIC 28810 3"
Sea-Dog Cowl VentsDurable and exible white PVC with traditional red inside cowl. Cowl snaps on to deck plate securely. Cowl may be removed and replaced with ush deck plate closure in rough weather. Vents come complete with deck plate.
Part # Description Height
SED 727130 3" Low pro le vent 5"
SED 727140 4" Low-pro le vent 5-7/8"
SED 727135 3" Standard vent 7-3/4"
SED 727139 3" Deckplate only
SED 727149 4" Deckplate only
Nicro Solar Mini-VentsThe Solar Mini-Vent is the smallest diameter solar vent. Just 7" across and 1-3/4" high. It is also very durable, since it is made of frosted polycarbonate with UV inhibitors. The Solar Mini-Vent operates only as an exhaust vent. It will remove around 700 cubic feet of air per hour at night in a 15 knot breeze. This vent has a shut-off damper operated from below. Attaches directly to the deck. Cut out: 3-3/4".NIC N20030 Vent with S/S cover
Parts:NIC 28830 Cover only, S/S
Nicro Solar VentThis solar vent provides boaters with fresh air ventilation.
Rechargeable battery allows for •24-hour continuous operation Whisper quiet operation •Interchangeable intake and exhaust •fans Direct to deck installation •Built-in on/off switch •2-year limited warranty•
NIC N20703-S 3"NIC N20704-S 4"
Parts:NIC 20590 Replacement battery
Oceanair Vent/Light ComboA new way to provide light and ventilation through the same unit. The combined extractor fan and integral halogen light are especially bene cial in con ned areas, such as boat shower rooms or galleys. Can be installed as a wall, ceiling or panel xture. Made from temperature resistant composite material, the unit has three modes of operation: combined, fan or light.
Long life 2.8W motor •50,000 hours operating life expectancy •Ideal for use in con ned space•Diameter: 5-1/2" x Cutout: 4"•
OCE VL-12V-C ChromeOCE VL-12V-W White
Vetus Mushroom Ventilators
Polished 316 stainless steel construction•Includes mosquito screen and synthetic counter ange•Screw size #8 R.H•
Part # Flow AreaSquare inch Dia Cutout
VTS PORTOS Flow 4.7" 4-5/8" 3-11/32"
VTS ATHOS Flow 7.2" 6" 4-13/16"
Sea-Dog Butter y VentsStamped 304 S/S•Features side knob•Use #6 RH fasteners•
SED 331445 4" diameterSED 331455 5" diameter
Sea-Dog Drain CoverStamped S/S•Works well as a locker ventilator•3-1/4" diameter •Use #6 RH fasteners•
SED 331600-1
Sea-Dog Ship's VentilatorCentre knob, twist to open or close•All S/S construction•Screw size #6 R.H.•
SED 331450 5" diameter
Sea-Dog Stainless Steel Round Louvred Vents304 stamped S/S •
SED 331424-1 4"SED 331425-1 5"
EXTERIO
R H
AR
DW
AR
E271Vents / Tank Vents
Mecca Tank VentsMade from 316 stainless steel this tank vent is attractive in appearance and very functional. Has a 30 mesh monel wire screen for a ame arrester. Can be used for either a gas, waste or water tank. Uses NPT 2-1/2" long threads and comes with a bronze retaining nut. MEC 3/4" NPT 1" head diameterMEC 1" NPT 1-3/8" head diameterMEC 1-1/2" NPT 1-3/4" head diameter
Gemlux Flush Mount Gas Tank VentsCan be installed with vent up or down. Extra wide ange . Includes GEMLUX® screen, vent cover, thin backing plate and thick backing plate for custom t. Fits 5/8" hose. Requires a 1-1/2" cutout.GEM 330954-1 90° elbowGEM 330956 Straight
Whitecap Gas VentsStainless steel ush round head vents for 9/16" hose.
Hole size: 3/4"•WHI 6005C StraightWHI 6006C 90°
Vetus UFO Deck VentilatorStainless steel permanently open ventilators are rain and splash proof. Complete with a plastic ventilation grill for nishing purposes.
Outside dia; 7-7/8", Height; 1-13/16"•Finishing grill Dia: 4-13/16"•Uses #8 screws•
VTS UFO
Vetus UFO Deck VentilatorThis 12 volt fan is designed for saloons, cabins, toilets and is ideally suited for heat extraction near refrigerators. Hardly audible and suitable for installation to both ceiling and wall it can also be used together with VETUS deck ventilators UFO and UFO-Trans. With the extremely low energy consumption of 0.22 Amp. at 12 volt, this ventilator is particularly suitable for boats. The special long-life computer motor has a life-time of not less than 50,000 hours. Since the motor does not have carbon brushes, the noise level is extremely low. Technical Details:
The long life computer motor can run continuously •Life expectancy is at least 50,000 hours of operation •The capacity is 42 cfm •Provided with a switch for 2 speeds •Static pressure: 1/4" H2O•
VTS FAN12
Perko Gas Tank VentsChrome plated pressure cast bronze with monel wire mesh screening. Elbow is bronze.
Maximum thickness: 7/8"•Part # Pipe Size
PER 503-DP3-CHR 3/8" x 3/8"
PER 503-DP4-CHR 1/2" x 1/2"
Perko Gas Tank VentsChrome plated pressure cast bronze with monel wire mesh screening.
Max. thickness: 5/8"•PER 515-DP3-CHR 3/8"PER 515-DP4-CHR 1/2"
Perko Gas Tank VentChrome plated cast bronze with removable 30 mesh, monel wire screen ame arrester.
1/2" NPT. O.D. ange: 2-1/2"•Neck length: 1-1/2"•
PER 505-DP-CHR
Perko Gas Tank Vent Chrome plated zinc with monel wire mesh screening.
Hose size: 5/8"•Max. wood thickness: 3/4"•
PER 506-DP4-CHR
Sea-Dog Flush Mount Tank Vent
Investment cast 316 stainless steel.SED 353210-1
Perko Gas Tank VentsChrome plated pressure cast bronze•Monel wire mesh screening •
Part #Hose Size
Max.Thickness
PER 509-DP4-CHR 5/8" 3/4"
PER 509-DP5-CHR 3/4" 5/8"
Sea-Dog Flush Mount Tank Vent
90° investment cast 316 stainless steel construction.SED 353230-1
272
EXTERIO
R H
AR
DW
AR
E
Tank Vents
Sea-Dog Chrome Zinc Gas Tank Vent
SED 352100-1
Sea-Dog Stainless Steel Gas Tank Vent
Comes with rubber gasket.SED 352210-1
Sea-Dog Die Cast Zinc Gas Tank Vent
Comes with rubber gasket. For 5/8" hose. Chrome plated nish.SED 352110-1
Sea-Dog Chrome Brass Gas Tank Vent
Comes with rubber gasket.SED 352020-1
Sea-Dog Nylon Gas Tank Vents
Injection molded nylon available in black or white. SED 357100-1 BlackSED 357105-1 White
Attwood Gas Tank VentUnique design makes this gas tank vent extremely splash resistant. Constructed of fuel-resistant polypropylene, totally corrosion resistant. Stainless steel ne meshed screen can be easily cleaned by unscrewing the exterior cap.
For use with 5/8" I.D. hose•Installation hole diameter: 3/4"•Maximum hull thickness 7/16"•
ATT 1607-3
Attwood 90 Degree P-Trap Fuel Tank VentsThese low pro le fuel tank vents help prevent water from entering the fuel tank during normal sea conditions and washdowns. The patented design features a series of baf es and traps keeping water out and eliminating the need for an anti-siphon loop in the vent hose.
For 5/8" I.D. hose•Maximum hull thickness 9/16"•
ATT 1670-3 Black with black coverATT 1671-1 Black with white cover
Perko Black Gas Tank Vent with Swivel ElbowBlack plastic cap with zinc alloy elbow and removable 30 mesh, stainless steel screen ame arrester. Design allows elbow to be rotated to any position.
Max hull thickness 3/4"•Hose size 5/8"•
PER 571-DP4-BLK
Marelon Tank VentA new idea in fuel tank vents. For hulls with solid cores only. Unit press- ts into 3/4" diameter hole without the need of a nut. Stainless steel screen will not corrode and has no plating to chip. These vents are precision molded in high-strength non-corrosive Marelon® making them completely free from corrosion and electrolysis.
For 5/8" hose. 2.75 cm x 7 cm.•MPS 907029
Sea-Dog Gas Tank Vent
Machined brass chrome plated. SED 352010-1
Sea-Dog 90 Degree Gas Tank Vents
90o hose tting for tight areas. Comes with rubber gasket. Part # A B C Construction
SED 352030-1 7/8" 2-3/8" 5/8" Chromed brass
SED 352230-1 1" 2-5/8" 5/8" 316 S/S
Marine East Plastic Gas Tank VentBlack plastic vent with a 1-1/4" diameter head. 100o
hose barb for 5/8" hose. Maximum hull thickness 3/4"•
MEP 3012
EXTERIO
R H
AR
DW
AR
E273Deck Plates
Beckson Screw Out Deck PlatesScrew-out plate was designed to provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning centre and an innovative gasket to assure a watertight seal. A patented back-up sealing wall leaves the plate waterproof, even if the gasket is removed. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Deck plates also are used for access, inspection, and clean out for tanks and compartments.
Uses #8 FH fasteners•BEC DP40-W 4" WhiteBEC DP60-W 6" White
Beckson Twist Out Deck PlatesDeck plate is designed to conceal mounting fasteners under the quick twist cover. The low pro le cover is self-centering, features uniquely styled nger grips and quickly locks in place with a 1/8 twist. Three separate sealing rings assure a watertight closure. Plates are molded of high-impact, marine quality plastic, with ultraviolet inhibitors for prolonged service.
Uses #8 FH fasteners•BEC DP50-W 5" White
Rabud Deck PlateScrew out 6" plastic deckplate with clear cover and O-ring for a water tight seal.RHS 6"LCW
Tempress Screw-in Deck PlatesWatertight deck plate with an O-ring seal and grooved ange bottom for bedding compound retention. Screw-in styrene centre. Use #8 PH screws.
Part # I.D. O.D. Cut Out Colour
TMP 43030 4" 6-1/8" 4-3/4" White
TMP 43035 4" 6-1/8" 4-3/4" Black
TMP 43130 5-7/8" 8-1/8" 6-3/4" White
Tempress Pry Out Deck PlatesWatertight deck plates with secure snap- t closure and o-ring seal. Flange has bevelled edge, pry out notch and six countersunk fastener holes. Available in 6" and 8" sizes with safety textured surface. Structural material stands up to tough service, extreme weather, and solvents (even acetone).
Uses #8 PH fasteners•Part # I.D. O.D. Cut Out Colour
TMP 43190 5-5/8" 8-1/8" 6-3/4" White
TMP 43191 5-5/8" 8-1/8" 6-3/4" Ivory
TMP 43195 5-5/8" 8-1/8" 6-3/4" Black
TMP 43330 7-7/8" 10-1/8" 8-3/4" White
TMP 43331 7-7/8" 10-1/8" 8-3/4" Ivory
TMP 43335 7-7/8" 10-1/8" 8-3/4" Black
Replacement ''O'' RingsTMP S-0053 4" Deck plate o-ringTMP S-0054 6" Deck plate o-ringTMP S-0055 8" Deck plate o-ring
Watertight - completely seals against water intrusion. •One-piece unit - no trim ring, fasteners, or sealant. •Ease of use - a turn of the “T” handle releases or secures the •deck plate. Patented design loads the deck plate at the centre, distributing •sealing pressure uniformly at the seal ring.
Part # Cut Out Bar Length
ARM DP-6"BLACK 6-3/4" 8-1/4"
ARM DP-8"BLACK 8-3/4" 10-1/4"
ARM DP-10"BLACK 10-3/4" 12-1/4"
Armstrong Nautical Deck Plates
Bomar Locking Centre Deck PlatesHigh impact, polycarbonate U.V. stabilized deck plates. Acetone resistant. The centre plate has a nonskid
nish, a unique nger-tip lift and twist locking mechanism, and an O-ring seal. Uses #10 F.H. fastener.
Part # Size Colour
Dimensions
Cut OutI.D. O.D.
BOM G840 8" White 7-5/16" 10-9/16" 8-1/2"
BOM G844 10" White 9-1/4" 12-1/2" 10-1/2"
BOM G845 10" Black 9-1/4" 12-1/2" 10-1/2"
Sea-Dog Screw-Out Deck Plates With Collar
Screw-in, molded collar deck plate•Use #8 FH screws•
Part # Colour A B C D
SED 337142 White 4" 5-3/4" 4-1/2" 5-1/8"
SED 337167 Black 6" 8-1/8" 6-1/2" 7-1/4"
274
EXTERIO
R H
AR
DW
AR
E
Deck Plates / Hatches
Sea-Dog Inspection CoversInjection molded ABS •Uses #10 fasteners•Cutout: 4-1/4"•Diameter: 5-5/8"•
SED 337050-1 BlackSED 337051-1 White
Sea-Dog Screw Out Deck Plate, w/ Clear Centre
Made from injection moulded A.B.S./Polycarbonate these deck plates allow for visual inspection of watertight compartments, storage lockers and fuel ttings without even having to remove the lid. Use #8 FH screws.
Part # A B C D
Black
SED 337146-1 4" 5-3/4" 4-1/2" 5-1/8"
SED 337156-1 5" 6-3/4" 5-1/2" 6-1/8"
SED 337166-1 6" 8-1/4" 6-1/2" 7-1/4"
White
SED 337141-1 4" 5-3/4" 4-1/2" 5-1/8"
SED 337151-1 5" 6-3/4" 5-1/2" 6-1/8"
SED 337161-1 6" 8-1/4" 6-1/2" 7-1/4"
Sea-Dog Screw-Out Deck Plates
Screw out deck plates are ABS injection molded to the highest standards using top quality UV stabilizers and anti-oxidants.
Uses #8 FH screws•Part # A B C D
Black
SED 337145-1 4" 5-3/4" 4-1/2" 5-1/8"
SED 337145 4" 5-3/4" 4-1/2" 5-1/8"
SED 337155-1 5" 6-3/4" 5-1/2" 6-1/8"
SED 337165-1 6" 8-1/4" 6-1/2" 7-1/4"
White
SED 337140-1 4" 5-3/4" 4-1/3" 5-1/8"
SED 337150-1 5" 6-3/4" 5-1/2" 6-1/8"
SED 337160-1 6" 8-1/4" 6-1/2" 7-1/4"
SED 337160 6" 8-1/4" 6-1/2" 7-1/4"
Suf x (-1) indicates display package
Sea-DogConcealed Fastener Screw Out Deck Plate
Concealed fastener deck plate with collar •Injected molded nylon/ABS construction •Cutout: 4-1/2", Ring: 5-3/4"•
SED 337247 Black
Seadog Deck Plate
Investment cast 316 stainless steelSED 335654
Rabud Access Hatches
Heavy duty, chemical resistant, white UV stabilized plastic deck hatches with stainless steel hinges.
Fastener #10 F.H.•Part # I.D. O.D.
RHS 711HLAW 7" x 11" 10-1/4" x 14-3/8"
RHS 1020HLAW 10" x 20" 13-1/2" x 23"
Parts:RHS 1033 Replacement handle
Beckson Stow Away HatchThis storage hatch can be used for glove compartments, engine control covers, re extinguisher storage, etc.
Opens a full 180º•Slip clip snubbing latch holds •cover closedOpen centre cover handle provides easy nger •grip to open and closeOutside: 6-3/4" x 12-3/4" •Hole cut-out 4-1/2" x 10-1/2"•Uses #10 FH fasteners•
BEC PH410MWC-20
EXTERIO
R H
AR
DW
AR
E275Hatches
Beckson HT Series Access HatchesBeckson HT Series Hatches offer a sleek, low pro le (1/2") appearance, with nothing to snag lines on. Features include hidden fasteners, integral 180o hinges and easy-grip latches. Designed for horizontal or vertical installation. Integral hinge and latch systems assure perfect alignment and ease of installation. Ideal for all types of storage, bait or sh wells, and electrical or fuel line access. Nonskid, diamond pattern surface.
Uses #10 FH fasteners•Part # Colour Latches I.D. O.D. Cut-Out
BEC HT-1115-W White 1 7-1/4" x 11-1/4" 10-3/4" x 14-3/4" 7-7/8" x 11-3/4"
BEC HT-1115-D Grey 1 7-1/4" x 11-1/4" 10-3/4" x 14-3/4" 7-7/8" x 11-3/4"
BEC HT-1424-W White 2 10-1/2" x 20-3/8" 14" x 24" 11-1/8" x 20-7/8"
BEC HT-1821-N Ivory 2 14-5/8" x 17" 18-1/8" x 20-1/2" 15-3/8" x 17-3/8"
BEC HT-1821-W White 2 14-5/8" x 17" 18-1/8" x 20-1/2" 15-3/8" x 17-3/8"
Tempress Access Hatches With Cam LatchThe Access Cam Hatch is made from a glass lled polypropylene, for strength and durability. All Access hatches are designed for heavy traf c areas, and will withstand people walking or standing upon them. Features a dog down latch, that compresses the gasket to create a weather tight seal with a quarter turn of the wrist. A patented integral hinge assembly that allows for easy lid removal. The bevelled skirted lid covers all fasteners.
Part # Colour I.D. O.D. Cut-out
TMP 44330 White 7" x 11" (1115) 10-3/4" x 15" 8-3/4" x 12-5/8"
TMP 44333 Dark Gray 7" x 11" (1115) 10-3/4" x 15" 8-3/4" x 12-5/8"
TMP 44530 White 9-1/2" x 19-1/4" (1323) 13" x 23-1/4" 11" x 20-7/8"
TMP 44533 Dark Gray 9-1/2" x 19-1/4" (1323) 13" x 23-1/4" 11" x 20-7/8"
Fasteners required 10 ea. #12 pan head screws for 7" x 11"Fasteners required 12 ea. #12 pan head screws for 9-1/2" x 19-1/4"
Tempress Hatch LinersThese tough, impact resistant liners are perfect for combining with the Tempress utility hatch to make a self-contained storage compartment, live well, or dry gear locker. The 1" anged liners are installed underneath the hatch and anchored in place when hatch
ange screws are installed. The small anged liners are dropped in place and may remain portable. White.Part # Dimensions Combines with Utility Hatch
TMP 41400 7-1/8" x 11-1/8" x 6" deep 44290, 44293, 44230, 44231, 44233
TMP 41504 11-1/4" x 21-1/8" x 9" deep 44431, 44430, 44432, 44433
TMP 41506 11-1/4" x 21-1/8" x 12" deep 44431, 44430, 44432, 44433
Part # Colour I.D. O.D. Cut-out
TMP 44230 White 7" x 11" 10-3/4" x 15" 8-3/4" x 12-5/8"
TMP 44430 White 9-1/2" x 19-1/4" 13" x 23-1/4" 11" x 20-7/8"
Utility Hatch Parts
TMP S-0006 1115 - White hinge (1pc)TMP S-0007 1115 - Ivory hinge (1pc)TMP S-0009 1115 - Grey hinge (1pc)TMP S-0010 1323/1330 - White hinge (1pc)TMP S-0011 1323/1330 - Ivory hinge (1pc)TMP S-0013 1323/1330 - Grey hinge (1pc)
Tempress Access Hatches With Slam LatchThe Access Slam Hatch is made from a glass lled polypropylene, for strength and durability. All hatches are designed for heavy traf c areas, and will withstand people walking or standing upon them. Features an easy close slam latch that forms a weather tight seal just by closing the hatch. Hatches also utilize a patented integral hinge assembly that allows for easy lid removal. The bevelled and skirted lid covers all fasteners for a clean look above or below decks.
Fasteners required 10 ea. #12 pan head screws for 7" x 11"Fasteners required 12 ea. #12 pan head screws for 9-1/2" x 19-1/4"
276
EXTERIO
R H
AR
DW
AR
E
Bomar Hatches / Portlights
Bomar Nibo Low Pro le Traditional HatchesAnodized HD aluminum frames•Vent position•Heavy-duty acrylic top •Quick acting tie down dogs•Uses #10 FH fasteners•
This hatch is in a semi- ush style which is the latest Eurostyle hatch for the high performance cruiser/racer. Silver anodized aluminum guarantees long lasting nish. Special marine aluminum alloy with high magnesium content. Tough acrylic top assures privacy, yet allows in plenty of light. Fast and easy to adjust new style collet arm has no knobs or parts to loosen and fall off or get caught on clothing. Locked vent position. Models - '10A' have a 1" spigot.
Part #Hatch
OpeningHole Cut
Out O.D. Deck
Flange
BOM 1000-10A 9-5/8"9-5/8"
10-3/4"10-3/4"
12-3/8"12-3/8"
BOM 1029-10A 12-1/4"17-3/8"
13-3/8"18-1/2"
15"20 1/8"
BOM 1039-10A 19-1/8“19-1/8”
20-1/4"20-1/4"
21-7/8"21-7/8"
BOM N1049-10AX4 24"24"
25-1/8"25-1/8"
26-3/4"26-3/4"
BOM 1070-10A 15-7/16“15-7/16”
16-1/2"16-1/2"
18-3/16"18-3/16"
Bomar Nibo High Pro le HatchesA heavy duty extruded hatch formed into an attractive modern shape. Silver anodized aluminum guarantees long lasting nish. Special marine aluminum alloy with high magnesium content. Tough acrylic top assures privacy yet allows in plenty of light. Fast and easy to adjust new style collet arm has no knobs or parts to loosen and fall off or get caught on clothing. Heavy duty hinges. The hatch has a locked vent position. Models - 'A' without spigot and Models - '10A' with 1" spigot. Note: Screen will not install without trim ring.
Uses #10 FH fasteners•
Part #Hatch
Opening Hole Cut OutO.D. Deck
Flange
BOM 2029-10A 12-1/4"17-3/8"
13-5/16"18-7/16"
15"20-1/8"
BOM 2039-10AX 19-1/8"19-1/8"
20-3/16"20-3/16"
21-7/8"21-7/8"
BOM 2049-10AX 24"24"
25-1/16"25-1/16"
26-3/4"26-3/4"
BOM 2070-10A 15-3/8"15-3/8"
16-7/16"16-7/16"
18-1/8"18-1/8"
BOM N2080-10A 17-3/8"17-3/8"
18-7/16"18-7/16"
20-1/8"20-1/8"
BomarMolded Portlight Gray Series RectangularStainless steel hardware, angled spigot, white frame with clear lens, complete with trim ring and screen.
Hatch opening: 4" x 11"•Cut-out: 5-1/2" x 12-1/2". O.D•Deck ange: 7-13/16" x 14-11/16"•Spigot length: 2-1/8"•
BOM G512-AD-27BOM GP902-01W Replacement knob White
BOM P2000-18L I/O New style left latch dog assemblyBOM P2000-18R I/O New style right latch dog assembly BOM P2000-20 3" high pro le hingeBOM P2000-27 Mushroom CapBOM P2000-25 Gasket low pro leBOM P2000-26 Gasket high pro leBOM P2000-30 Bracket for MK11 tie downBOM P2000-53 Latch dog assembly right/lockingBOM P2000-52 Latch dog assembly left/lockingBOM P2000-66 White screen keepers (nibs)BOM P2000-84-R Latch dog assembly right/non-lockingBOM P2000-84-L Latch dog assembly left/non/lockingBOM P2000-75-17 Right riser arm 1039BOM P2000-75-18 Right riser arm 1022BOM P2000-75-21 Right riser arm 1049BOM P2000-7510.75 Right riser arm 1029BOM P2000-76-13 Left riser arm 1070BOM P2000-76-17 Left riser arm 1039BOM P2000-76-18 Left riser arm 1022BOM P2000-76-21 Left riser arm 1049BOM P2000-86 In./out.quick cap w/ sq shaft
P2000-53
P2000-Arm
P2000-18LP2000-27 P2000-30
Bomar Parts for 100 Series Hatches
Bomar cast hatches can be identi ed by having a cast aluminum frame with molded hinges. They generally have a cast aluminum riser.BOM P100-07 Female knobBOM P100-09 Latch dog assemblyBOM P100-52 9/16" gasket
P100-07
P100-09
Bomar Parts for Molded Hatches 1000/2000 Series
EXTERIO
R H
AR
DW
AR
E277Hatch Accessories / Portlights
Bomar Hatch Trim Rings & Screens
Part # Fits Hatches Description Colour
BOM NS2000-EX N1000-10A, N2000-10A Screen N/A
BOM NT2000-BLK N1000-10A, N2000-10A Trim Ring Black
BOM NT2000-OFF-W N1000-10A, N2000-10A Trim Ring Off White
BOM NS2029-EX N1029-10A, N2029-10A, N0029-10FX, N0029-FXN Screen N/A
BOM NT2029-BLK N1029-10A, N2029-10A, N0029-10FX, N0029-FXN Trim Ring Black
BOM NS2039-EX N1039-10A, N2039-10A, N0039-10FX, N0039-10FXN Screen N/A
BOM NT7039-OFF-W 1039, 2039 Trim Ring Off White
BOM NS7039-BK Sewn Screen for 1039-10A Screen N/A
BOM NT2039-BLK N1039-10A, N2039-10A, N0039-10FX, N0039-10FXN, N0639-10FX Trim Ring Black
BOM NT2039-OFF-W N1039-10A, N2039-10A, N0039-10FX, N0039-10FXN, N0639-10FX Trim Ring Off White
BOM NS2049-EX 1049-10AX, 2049-AX Screen N/A
BOM NT2049-BLK N1049-10A, N2049-10A, N0049-10FX, N0049-10FXN Trim Ring Black
BOM NT2049-OFF-W N1070-10A, N2070-10A, N1070-10P, N2670-10AX Trim Ring Off White
BOM NS2070-EX N1070-10A, N2070-10A Screen N/A
BOM NT2070-BLK 1070-10A Trim Ring Black
BOM NT2070-OFF-W N1070-10A, N2070-10A Trim Ring Off White
BOM GT966-1 GT966 Trim Ring Black
BOM GT966-6 GT966 Trim Ring Off White
Beckson Opening Portlights
These "Rain Drain" portlights will self-drain while tipped at angles, up to 45o. The frame and nishing ring are made of high impact ABS plastic. Stainless steel hardware holds the Lexan window in place. Comes complete with bug screen.
Portlight # Screen # Gasket # Opening Cutout Outside Size
BEC PO410DWC-20 BEC SCR 410 BEC GK-410 4" x 10" 4-1/2" x 10-1/2" 6-3/4" x 12-3/4"
BEC PO414DWC-20 BEC SCR 414 BEC GK-414 4" x 14" 4-1/2" x 14-1/2" 6-3/4" x 16-3/4"
BEC PO512DWC-20 BEC SCR 512 BEC GK-512 5" x 12" 5-1/2" x 12-1/2" 7-3/4" x 14-5/8"
BEC PO714DWC-20 BEC SCR 714 BEC GK-714 7" x 14" 7-1/2" x 14-3/8" 9-3/4" x 16-3/4"
BEC PO8RD-WC-20 - BEC GK-8RD 8" round 8-1/2" 10-3/4"
PO410DWC-20
Parts:BEC LNZ-414C Clear lens 4” x 14"
Beckson Rain ShieldThe external rain shield may be fastened by screws or by bonding to the exterior trim ring of opening ports. This will keep out rain, spray and provide shade.
Projection from mounting surface is 2-1/2” (6.3 cm) •Vertical dimension of hood overall, 3” (7.6 cm)•Overall length: 16-3/4"•Under hood length: 14-1/2"•Use with 4" x 14" & 7" x 14" portlights •
BEC RS14
278
EXTERIO
R H
AR
DW
AR
E
Freeman Hatches
Round Hatches - Lift-OutEdge seal: Compression•All Aluminum•
Flush, round hatch ideal for quick access to valves and pipes, shaft alleys, void spaces, or sh sorting. The three dog mechanism ensures proper sealing tension.
Part # Clear Opening Deck Cut Overall
FRE 8A 7.9" 10.3” 9.8”
FRE 12A 11.9" 14.8” 17.4”
FRE 15A 15” 17.8” 21.5”
FRE 18A 18” 20.9” 24.5”
Hinged HatchesEdge seal: Compression•All aluminum •
Same features as Freeman lift out hatches. The unique hinging device allows the hatch to be opened more than 180° and it " oats" when the hatch is closed to facilitate a tighter seal.
Part # Shape Clear Opening Deck Cut Overall
FRE 18H/A Round 18” 20.9” 24.5
FRE 1524H/A Oval 14.6” x 23.5” 17.4 x 26.5” 21.6” x 30.5”
FRE 9813-2004 Gasket material, 24 x 24FRE 9801-2007 Model 20 gasketFRE 0211-2005 Regular arm for model 18FRE CAM Cam buttonFRE 0031-2001 Bushing w/ sleeveFRE 0031-2064 Inside escape handle alum.FRE 0031-2077 Aluminum actuator with pinFRE 0411-2004 S/S knurled pin 1/4" x 2-1/4"
Freeman Hatch Replacement Parts
FRE 1524A-RING 15 x 24 aluminum ring onlyFRE 1524S-RING 15 x 24 steel ring onlyFRE 18A-RING Model 18 Aluminum ring onlyFRE 1926S-RING 19x26 steel ringFRE 9801-2003 Gasket material, 12 x 18FRE 9801-2004 Model 15 gasket materialFRE 9801-2005 Gasket material, 15 x 24FRE 0211-2004 Regular arm for F/1524A hatchFRE 9813-2001 Gasket material, 19 x 26
Compression Sealing MethodCompression Seal Series Hatches have easy-to-clean spigots,
feature long gasket life, and are economical to purchase. Aluminum Deck Rings are intended to be weld installed into aluminum decks and bolt installed into other deck materials.
Steel Deck Rings are to be weld installed into steel decks only. Watertight seal intermittent to 30 foot head, continuous 10 foot head top-loaded pressure (on properly installed and adjusted
hatch assemblies). Knife Edge Sealing Series
Knife Edge Seal Series Hatches feature a coaming with drain gutter and an aggressive sealing rim edge
A drain tting can be installed to minimize water from entering enclosure when hatch is initially opened
Freeman Aluminum HatchesOval & Square Hatches - Lift-OutFreeman oval and square lift out aluminum or steel hatches are speci ed and used on all types of vessels (tugs, shing boats, research vessels, rescue craft and barges). These hatches are ideal for full-size access to void spaces, storage areas or lazarettes and for sh sorting or emergency escapes. A unique, ush handle design linked to a positive four dog mechanism ensures a secure seal. Special, corrosion resistant, high strength marine alloys combined with stainless steel, delrin and chloroprene are used to build hatches that withstand torturous treatment.
Guaranteed watertight to 30 feet of head•Fast acting, ush, quarter turn handles•Evenly spaced, positive locking dogs exert uniform pressure•
Part # Ring Edge Seal Clear Opening Deck Cut Overall Cover O.D.
FRE 1218A Aluminum Compression 12" x 18" 15" x 21" 18.8" x 24.8" 14.1" x 20.3"
FRE 1524A Aluminum Compression 14.6" x 23.4" 17.6" x 26.5" 21.3" x 30.3” 16.3" x 25.9"
FRE 1524S Steel Compression 14.6" x 23.4" 17.4" x 26.5" 17.4" x 26.5" 16.3" x 25.9"
FRE 1926A Aluminum Compression 19.1" x 26" 21.8" x 28.6" 25.3" x 32" 20.9" x 27.9"
FRE 2020A Aluminum Knife Edge 20" x 20" 22.5" x 22.5" 26.4" x 26.4” 21.9" x 21.9"
FRE 2424A Aluminum Knife Edge 24.5" x 24.5" 27" x 27" 31" x 31" 26.4" x 26.4"
EXTERIO
R H
AR
DW
AR
E279Oceanair Shades
Oceanair Surface SkyscreenIt features a unique heat re ecting blind and ultraviolet protected yscreen - providing complete below deck privacy or bug free ventilation. Unique black out blind and
yscreen cassette ts all main brands of hatch and is designed to clear trim moldings.
The easy t solution for all budgets•Ease of installation on the surface of the headlining, •ideal for retro tIdeal hatch solution for boats with thin decks, and soft, •or no headliningSoft-edged, low-pro le design•Can be retro- tted to existing hatch trim surrounds, •providing the trim is less than 12mmWide range of standard sizes •Optional trim and liner systems resolve all throughdeck •engineering challengesFully serviceable •
Part # ColourScreenL x W
OverallW
Lewmar
OCE SFSS-60-W White 20" x 20" 24-1/4" x 25-1/2"
OCE SFSS-60-B Beige 20" x 20" 24-1/4" x 25-1/2"
Lewmar w/ PVC Screen
OCE SFSSL-20-B Beige 13-5/8" x 8" -
OCE SFSSL-20-W White 13-5/8" x 8" -
OCE SFSSL-30-W White 18" x 12-7/8" -
OCE SFSSL-44-W White 17-3/8" x 17-3/8" -
OCE SFSSL-60-W White 20" x 20" 24-1/4" x 25-1/2"
Bomar
OCE SFSS-1039-W White 20-1/4" x 20-1/4" 24-1/2" x 25-3/4"
OCE SFSS-1039-B Beige 20-1/4" x 20-1/4" 24-1/2" x 25-3/4"
OCE SFSS-1049-W White 25-1/8" x 25-1/8" 29-3/8" x 30-5/8"
OCE SFSS-1049-B Beige 25-1/8" x 25-1/8" 29-3/8" x 30-5/8"
Taylor
OCE SFSS-12/12-B Beige 12" x 12" N/A
OCE SFSS-12/12-W White 12" x 12" N/A
OCE SFSS-20/20-W White 20" x 20" N/A
A PVC liner and clip are required for proper installing.
OCE SL-2.5"-LINER-JOINTOCE SL-4"-LINER-JOINT
Oceanair PortShadeA roller blind in an ultra slim cassette, designed to provide all the bene ts of a blind for even the smallest portlights. This blind may be mounted on horizontal or vertical surfaces adjacent to the portlight. The cassette is made of anodized aluminum and utilizes a unique heat re ective blind fabric to give maximum protection from sunlight. Manufactured in standard sizes to t most portlights.
Part # ColourScreenL x W
OverallW
OCE PSH-1-W White 11" x 13-3/8" 15-1/8"
OCE PSH-2-B Beige 11" x 15" 16-5/8"
OCE PSH-2-W White 11" x 15" 16-5/8"
OCE PSH-3-B Beige 12-5/8" x 18-1/8" 19-3/4"
OCE PSH-3-W White 12-5/8" x 18-1/8" 19-3/4"
Comes with all the necessary ttings and screws.
Oceanair RailShade
The ideal roller blind for general use and makes a cost-effective choice for hatches and larger windows. RAILshade has a sleek, silver-anodized cassette and may be ordered in two sizes.
Part # Screen L x W Overall W
OCE RSH-1-SA 14-1/8" x 15-3/4" 15-5/8"
OCE RSH-2-SA 18-1/2" x 20-1/8" 20"
Oceanair PleatedShade
Simple and quick to install in any boat interior, they are self adjusting for height and nonparallel use. Stylish and practical for any interior.
Part # Colour L x W
OCE PLS-1-CR Beige 12" x 15"
OCE PLS-1-N Navy 12" x 15"
OCE PLS-2-CR Beige 12" x 20"
OCE PLS-2-N Navy 12" x 20"
OCE PLS-3-CR Beige 12" x 25"
OCE PLS-3-N Navy 12" x 25"
OCE PLS-4-CR Beige 12" x 30"
OCE PLS-4-N Navy 12" x 30"
OCE PLS-5-CR Beige 12" x 40"
OCE PLS-5-N Navy 12" x 40"
► NOTE: Custom Sizes Available - Ask For a Quote
280
EXTERIO
R H
AR
DW
AR
E
Hatch Adjusters
BennettHatch Lifter Retro t SystemsLift virtually any size hatch at the push of a button. These single hydraulic cylinders deliver 250 pounds of vertical lifting capability and easily retro t to existing Bennett trim tab hydraulic power units. The Hatch Lifter shares the trim tab Hydraulic Power Unit. When the hatch is closed, system components are out of view. Relief valve allows hatch to be lifted manually in case of power failure. Cylinder is constructed of black anodized aluminum with a stainless steel rod. Kits come complete with cylinder, rocker switch, manifold, hardware, tubing, and ttings.
Stroke: 24" x Closed: 29-3/8"•BEN HL-1000-24"
Lenco Electric Hatch Lifts
Lenco hatch lifts are made entirely of non-corrosive materials and are completely submersible. Inline motor design makes mounting easier and delivers over 750 lbs. of lift. Clutchless ball screw design always runs in sync on dual lift applications and never binds. Stainless steel ram locks in any position. Ballscrew spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors. Motor draws 5 amps @ 12 volts. Lifts install with a single power cable.
Part # LOA Retracted Stroke LOA Extended
LEN HL-800 25" 8" 33"
LEN HL-1200 29" 12" 41"
LEN HL-1200S 25" 12" 37"
LEN 50015-001 Stud upper bracket
LEN 50014-001 Stud lower bracket
Perko Portlight ChainStainless steel chain with chrome plated
ttings. Use #8 screws.
Total length: 7”•Strap length: 1-7/8”•
PER 441-DP-CHR
Beckson Twist KnobsMolded plastic twist knobs. Available with a threaded male stud or with a female threaded ferrule.
Part # Knob Colour
BEC PRT-AB 1/4 - 20 Male Black
BEC PRT-B 1/4 - 20 Female Black
BEC PRT-W 1/4 - 20 Female White
BEC PRT-2B 1/4 - 20 Male Black
BEC PRT-CB 5/16 - 16 Male Black
Beckson Cam LatchesRetro- t your old Beckson hatches. Cam latches enable the hatch to be opened or closed with a single ip. Stronger than knobs or levers. White.BEC PRK-AW Complete assemblyBEC PRK-W Cam latch only
EXTERIO
R H
AR
DW
AR
E281Gas Springs
Attwood Springlift Gas SpringsNitrogen lled gas springs provide an excellent solution for opening hinged panels and various other products. Doors, lids and windows can be raised and kept open with assistance, yet can be smoothly and easily closed. Various mounting brackets and fastening devices make installation quick and simple. Attwood's black rod nish is 6-8 times more corrosion resistant than chrome.
Part #Length
Open-ClosedEnd
FittingPressure
lbs.
ATT SL1-20#-5 10" - 7" Blade 20
ATT SL1-40#-5 10" - 7" Blade 40
ATT SL3-60#-5 20" - 12" Blade 60
ATT SL3-110#-1 20" - 12" Blade 110
ATT SL27-100#-1 28" - 16.5" Socket 100
ATT SL27-120#-1 28" - 16.5" Socket 120
ATT SL29-80#-1* 36.3" - 21.10" Socket 80
ATT SL30-20#-5 10" - 7" Socket 20
ATT SL30-40#-5 10" - 7" Socket 40
ATT SL30-60#-5 10" - 7" Socket 60
ATT SL31-20#-5 5.25" - 7.5" Socket 20
ATT SL31-30#-5 5.25" - 7.5" Socket 30
ATT SL33-20#-5 15" - 9.5" Socket 20
ATT SL33-40#-5 15" - 9.5" Socket 45
ATT SL33-60#-5 15" - 9.5" Socket 60
ATT SL34-20#-5 20" - 12" Socket 20
ATT SL34-30#-5 20" - 12" Socket 30
ATT SL34-40#-5 20" - 12" Socket 40
ATT SL34-60#-5 20" - 12" Socket 60
ATT SL34-80#-5 20" - 12" Socket 80
ATT SL34-120#-5 20" - 12" Socket 120
ATT SL35-40#-5 12" - 8.46" Socket 40
ATT SL35-50#-5 12" - 8.46" Socket 50
ATT SL36-40#-5 17" - 10" Socket 40
ATT SL36-90#-5 17" - 10" Socket 90
ATT SL38-60#-1 23" - 13" Socket 60
*Requires a 13mm ball # ATT SL-62SS-BS-1
Part # Style Mount Holes
ATT SL-50B-P3-7 900 Ball 10mm 2
ATT SL-3HB-P3-7 Flat Ball 10mm 3
ATT SL-81-1 Cir-clip
Bracket OptionsBlack painted nish
Attwood Stainless Steel Gas SpringsA line of stainless steel gas springs that offer more durability. The pressure tube and rod are super-tough #316 stainless steel alloy. All other exposed components are stainless steel or marine-grade composite.
8 mm Rod x 18 mm Cylinder•
Socket End
Choice of Pem Attachment Points and Finish SpringLift mounting brackets are available with Blade Pem or Ball rem gas spring attachment points and a choice of materials and nishes, including zinc plated steel with black painted
nish or stainless steel.
Part #Length
Open-ClosedEnd
FittingPressure
lbs.
ATT SS30-40#-5 10" - 7" Socket 40
ATT SS33-20#-5 15" - 9.5" Socket 20
ATT SS33-40#-5 15" - 9.5" Socket 45
ATT SS34-20#-5 20" - 12" Socket 20
ATT SS34-30#-5 20" - 12" Socket 30
ATT SS34-40#-5 20" - 12" Socket 40
ATT SS34-60#-5 20" - 12" Socket 60
ATT SS34-80#-5 20" - 12" Socket 80
ATT SS34-120#-5 20" - 12" Socket 120
ATT SS36-40#-5 17" - 10" Socket 40
Part # Style Mount Holes Finish
ATT SL-40SS-P3-7 Flat Ball 10mm 2 S/S
ATT SL-46SS-P3-7 900 Ball 10mm 5 S/S
ATT SL-46SS-P3R-1 900 Rev Ball 5 S/S
ATT SL-50SS-P3-7 900 Ball 10mm 2 S/S
ATT SL-58SS-P3-7 900 Ball 10mm 2 S/S
ATT SL-62SS-BS-1 Flat Ball 13mm 4 S/S
ATT SL-69SS-BS-1 Stud* Ball 10mm - S/S
*9/16" Shank Length
Packaging OptionsParts ending in -7 are retail packaged by the pairParts ending in -5 are retail packaged by the each
Parts ending in -1 are sold in Bulk
282
EXTERIO
R H
AR
DW
AR
E
Hatch Adjusters
TH Marine Lid & Hatch SupportA 5/8" diameter, 12" long spring that requires four #8 FH screws for mounting. Designed to support 20lbs. maximum. It includes an internal S/S cable to prevent over extension on heavy lids.THM HS-1C-DP
Lamp Stainless Steel Flap StaysSatin nish 18-8 S/S•Requires 4 #8 FH fasteners•
LMP HS-180 8-17/16"LMP HS-210 9-29/64"
Lamp Stainless Spring Loaded Lid Stays
Self opening and closing •Satin nish 18-8 S/S•
Part # Length Open Closed
LMP LK-222 8-47/64" 6-25/32"
LMP LK-380 14-31/32" 11-1/32"
Sea-Dog Hatch Adjusters
Stamped S/S and nylon construction •With nylon locking nut•
Part # A B C D
SED 321291-1 11-1/8" 17-7/8" 1-3/8" 1-3/16"
SED 321292-1 14-3/16" 24-3/16" 1-3/8" 1-3/16"
Sea-Dog Side Vent Adjuster
Injection molded nylon push nut retainer nut with washer, stainless steel pin.SED 324380-1
Sea-Dog Hatch Adjusters
Stamped S/S and nylon construction•With easy grip locking sleeve•
Part # A B C D
SED 321295-1 11-15/16" 17-7/8" 1-3/8" 1-3/16"
SED 321296-1 14-15/16" 24" 1-3/8" 1-3/16"
Perko Hatch AdjusterChrome plated brass and zinc. Black plastic knob.
Arm length: 10"•Adjustment: 9-1/2"•Slide length: 10"•Uses #8 fastener•
PER 797-DP-CHR
Perko Windshield AdjusterChrome plated zinc. Black plastic knob. Sold in pairs.
Length: 12"•Adjustment: 9-1/2"•Knob diameter: 1-3/4"•Uses #8 fastener•
PER 1290-DP-CHR Side mount
Perko Windshield AdjustersChrome plated brass and zinc. Black plastic knob.
Uses #8 fastener•PER 1116-DP1-CHR 8"PER 1116-DP2-CHR 10"PER 1117-DP-BLK Spare knob for 1116,1179,1180
Perko Windshield Adjusters
Black plastic knob •Chrome plated brass and zinc•Outside tube diameter: 1/2"•Uses #6 fastener•
Part # Closed Open
PER 1179-DP1-CHR 10" 18"
PER 1179-DP2-CHR 12" 20"
Perko Windshield AdjusterChrome plated brass and zinc. Black plastic knob.
Outside tube diameter: 1/2"•Length closed: 12"•Length open: 21"•
PER 1180-DP-CHR
EXTERIO
R H
AR
DW
AR
E283Hatch Adjusters
Sea-Dog Windshield Brace KitFormed aluminum & injected molded nylon construction. Includes two windshield brace feet and a 14-1/4” length of tube to be cut to size.SED 324310-1
Perko Hatch Support BracesChrome plated brass•Sold in pairs•Uses #8 fastener•
PER 762-DP2-CHR 12"PER 762-DP3-CHR 14"
Sea-Dog Hatch SpringFormed and stamped 304 S/S. An internal wire prevents the spring from being over extended.
Fastener: #10 RH•L: 10-1/8"•
SED 321670-1
Sea-Dog Hatch SpringsFormed and stamped 304 S/S. An internal wire prevents the spring from being over extended.
Fastener: #10 RH or 3/16" Pop rivet•L: 8-5/8"•
SED 321650 BulkSED 321650-1 Packaged
Sea-Dog Hatch SpringFormed and stamped 304 • S/S Fastener: #6 RH or 1/8" pop rivet•L: 9"•
SED 321660-1
Sea-Dog Hatch Spring
Formed 304 S/S, heavy duty spring that is ideal for larger hatches and dock boxes. Strong stainless steel spring with internal safety cable that prevents spring from being overextended during normal use. Heavy duty molded nylon pads on both ends.SED 321680-1
Notes
TACO MARINE LUMBERBUILD IT TO LAST…UV stabilized polymer sheet Excellent resistance to sun and saltwater
Won’t rot, delaminate or splinter Matte texture eliminates painting No special tools required: cuts, routes and shapes like wood
••
•••
TACO MAKES RUB RAIL REPLACEMENT EASY…
Flexible vinyl and semi rigid rub rail kits New semi-rigid rub rail kit w/flexible vinyl chrome insert - Enjoy the elegant look of stainless steel at a fraction of the cost Everything needed in one convenient boxNew easy-carry box
••
••
TACO RUB RAIL KIT
OP
TACO T-TOP
an anodized aluminum T-top with the look, strength and durability of a factory-installed top that assembles and installs without welding.
BOAT OWNERS CAN NOW HAVE…
Adjustable design fits most boats and consoles (up to 41"W) Accessory-ReadyTM T-top ring allows for easy installation &
removal of acessories Outrigger-Ready designed for 10-minute installation of Grand Slam 270 Outrigger mounts Adjustable, removable canvas available in choice of colors Ships and stores in flat UPS-compliant boxes
••
•
•
•
TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarinene.com
NEW!
EXTERIO
R H
AR
DW
AR
E285Rub Rails / Molding
TACO Rub Rail EndsStainless steel type 304. Highly polished. 3/4" ts S11-4510P12 and 1" ts the S11-4650P12.
1/4" W x 12" L•TAC S11-2000P12 3/4"TAC S11-2001P12 1"
Sea-Dog Rub Strakes
Stamped 304 stainless steel, highly polished. Use #8 FH screws.Part # A B C D E
SED 055408-1 8" 5" N/A 1/4" 3/4"
SED 055412-1 12" 4-1/2" 4-1/2" 1/4" 3/4"
SED 055418-1 18" 7-1/2" 7-1/2" 1/4" 3/4"
SED 055424-1 12" 7-1/16" 7-1/16" 1/4" 3/4"
TACO Stainless Steel Rub StrakeStainless steel type 304. Highly polished.
1" H x 1/4" W x 24" L•TAC S11-1800P24
TACO Stainless Steel Rub RailHollow back, half oval, type 304 marine grade stainless steel. Drilled and countersunk on 6" Centres.
Length: 12'•Part # Height Gauge Fastener
TAC S11-4500P12 1/2" .062" #6
TAC S11-4511P12 3/4" .077" #8
TAC S11-4650P12 1" .077" #10
TAC S11-4670P12 1-1/4" .077" #10
A500375VEL12
A500304TAL12
TACO T Hatch Trim Molding
Anodized aluminum•Length: 12'•
TAC A500304TAL12TAC A500375VEL12TACO Stainless Steel Rub Rail
Solid back, half oval, type 304 marine grade stainless steel. Drilled and countersunk on 6" centres.
Length: 12'•Part # A B Fastener
TAC S11-450SP12 1/2" 5/32" #6
TAC S11-467SP12 1-1/4" 1/4" #12
TACO Universal Aluminum TrimAnodized aluminum•5/8"H x 1/4"W•Hole size: #5•Length: 12'•
TAC A500273TAL12D
TACO Exterior GutterAnodized aluminum•Hole size: #6•Length: 12'•
TAC A510149TAL12D
TACO Half OvalAnodized aluminum •Hole size: #6 •Length: 12'•
TAC A510102TAL12DTAC A510104TAL12D A510102TAL12D
A510104TAL12D
TACO Transom EdgeAnodized aluminum•Hole size: #5•Length: 12'•
TAC A500326TAL12DTAC A500328TAL12D
A500326TAL12D
A500328TAL12D
TACO MoldingAnodized aluminum•Hole size: #8•Length: 12'•
TAC A110151TAL12DTAC A110152TAL12D
A110151TAL12DA110152TAL12D
286
EXTERIO
R H
AR
DW
AR
E
Rub Rail / Moldings
Colortrym GuttersAnodized aluminum•Bottom lip to cover raw edge of •
breglassCountersunk for # 6 fastener on 6" •centres Length: 12'•
CTM 1880BDMAC
Colortrym Hatch MoldingsAnodized aluminum•Use for hatch cover trim •Not drilled•Length: 12'•
CTM 7365CTM 7395
Colortrym Screw-on OvalsAnodized aluminum•Countersunk for #6 fastener •on 6" centres Length: 12'•
CTM 1010BMACCTM 1666BMAC
Colortrym Edge FacingsAnodized aluminum•Countersunk for #4 fasteners on •6" centresLength: 12'•
CTM TM19 BACTM 3938 BMAC
TM-19BA
3938 BMAC
Colortrym Utility EdgingAnodized aluminum•Countersunk for #6 fastener on 6" •centres Length: 12'•
CTM 1937BMAC
TACO Aluminum Rub RailAnodized nish •Uses #8 fasteners•Length: 12'•
TAC A110347BLY12DInsert:
TAC V124155BKA BlackSold by the foot•
TACO Aluminum Rub RailAnodized aluminum•Use #8 fasteners•Length: 12'•
TAC A110638TAL12DInsert:
TAC V120338BKA BlackSold by the foot•
TACO Aluminum Rub RailAnodized nish •Length: 12' •
TAC A110317TAL12DInsert:
TAC V120317BKA BlackSold by the foot•
TACO Aluminum Rub RailAnodized aluminum •Use #8 fasteners•Length: 12'•
TAC A110342BLY12DInsert:
TAC V120342BKA BlackSold by the foot•
Anodized aluminum •Use #10 fasteners •Length: 12'•
TAC A120303BLY12DTAC A120305BLY12D
TACO Aluminum Rub Rail
Insert: TAC V120303BKA Black
Sold by the foot•
EXTERIO
R H
AR
DW
AR
E287TACO Rub Rails
RUB RAIL SELECTION TIPSHere is how to get started:
MEASURING YOUR BOAT1. Measure the length and beam 2. Add them together and multiply by two 3. This is the minimum length of rub rail required for your boat
RUB RAIL SELECTIONYou can replace your rub rail with a factory replacement style or a completely different look. Regardless of the material originally •installed by the builder of your boat, feel free to choose the material and style you desireIt is easier to install if you remember to choose a rub rail that is at least the same height as the original•Flexible vinyl rub rail is the easiest to bend and provides a cushioning effect when in use against normal bumps•Rigid vinyl and aluminum rub rail with exible vinyl inserts, last long and are easy to install in straight runs•Rigid vinyl rub rail with stainless steel overlap provides the best protection and the longest useful life•
TACO D.I.Y. Rub Rail KitsKits include:
Flexible vinyl rub rail •Insert•End caps (where applicable)•Screws, & installation guide•
TACO's vinyl extrusions incorporate prime virgin resins, U.V. inhibitors, plasticizers, fungicides, impact modi ers and other additives to ensure outstanding weatherability and performance.
TACO Semi-Rigid Vinyl KitComplete with:
50’ rub rail (V11-9795)•50’ insert (V12-4144)•End caps, screws and installation guide •Hard durometer creates rigid-like look •Continuous coil allows for one piece installation without seams •Tight radius bending can be made with little or no heating•
TAC V119795BBK50D2
TACO Flexible Rub Rail KitComplete with:
50' Black exible rub rail (V11-0809BKA50)•50' White insert (V12-0810WHA100)•2 ea. End caps (F90-0750BN)•100 ea. Stainless steel screws•
TAC V110809BWK502
TACO Flexible Rub Rail KitComplete with:
50' Black exible rub rail •(V11-3426BKA50)50' Black insert (V12-0005BKA50)•2 ea. End caps (F90-0001BKN)•100 ea. Stainless steel screws•
TAC V113426BBK502
TACO Flexible Rub Rail KitComplete with:
50' Black exible rub rail •(V11-0809BKA50)50' Black insert (V12-0003BKA50)•2 ea. End caps (F90-0001BKN)•100 ea. Stainless steel screws•
TAC V112423BBK502
TACO Flexible Rub Rail KitComplete with:
50' Black exible rub rail (V11-3447BKA) •50' White insert (V12-0003WHA50).•2 ea. End caps (F90-0002BKN)•100 ea. Stainless steel screws•
TAC V113447BWK502
288
EXTERIO
R H
AR
DW
AR
E
TACO Rub Rails
TACO Work Boat Vinyl Rub RailHeavy duty work boat rub rail•White in colour•
20 foot lengthsTAC V210945WHA20
TACO Rigid Vinyl Rub Railw/ Flexible Insert
Colour and gloss levels matched•to gel coats Requires heat for radius forming•Cuts and drills like wood•Ideal for boats up to 25'•
TAC V219501WHC20D White, 20'
Insert:TAC V120303BKA Black, per foot
TACO Rigid Vinyl Rub Rail Designed for use without an insert •Provides good basic protection•Ideal for work boats•Sold as a straight length or •coiled in a box
20 foot lengthsTAC V213670BKA20 Black lengthTAC V213670BKA20D Black coiledTAC V213670WHA20D White coiled
End Cap:TAC F900001BKN Black, each
TACO Rigid Vinyl Rub Railsw/ Stainless Insert
Rigid vinyl rub rail with stainless •steel insert provides the ultimate in durability and eleganceIdeal for 20 to 40 foot boats•Sold by the each•
TAC V219613BKA20D Black, 20'
Insert:TAC S11-4511P12 S/S, 12'
TAC V219659BKA20D Black, 20'
Insert:TAC S11-4511P12 S/S, 12'
TACO Semi-Rigid Rub RailsOffers the appearance and durability of rigid rub rails with the •formability of exible rub rails Tight radius bending can be made with minimal heating•Continuous coils for one-piece installation without seams•
TAC V110899BKA Molding
Sold by the foot (100 foot lengths)
TAC V110899BKA100 Molding
Sold by the 100 foot lengthInsert:
TAC V120005BKA Black
TAC V110809BKA Molding, black
Sold by the foot (50 foot lengths)Inserts:
TAC V120810BKA BlackTAC V120810WHA White
TAC V112423BKA Molding, black
Sold by the foot (100 foot lengths)Insert:
TAC V120003BKA Black
End Cap:TAC F900001BKN Black, each
TAC V113426BKA Molding, black
Sold by the foot (50 foot lengths)Insert:
TAC V120005BKA Black
End Cap:TAC F900001BKN Black, each
TAC V113447BKA Molding, black
Sold by the foot (100 foot lengths)Insert:
TAC V120003BKA Black
End Cap:TAC F900002BKN Black, each
EXTERIO
R H
AR
DW
AR
E289Vinyl Trim / Weather Seal
TACO Flexible Vinyl Trim
Covers the un nished edge and follows any contour or radius. Flexible PVC trim with individual internal aluminum clips and gripping tongue. 25' lengths.TAC V30-1005B25-1 Trim 5/16" x 9/16" Black
TAC V30-1005W25-1 Trim 5/16" x 9/16" White
TAC V30-1008B25-1 Trim 1/4" x 1/2" Black
TAC V30-1008W25-1 Trim 1/4" x 1/2" White
TAC V30-1312B25-1 Trim 3/8" x 5/8" Black
TAC V30-1312W25-1 Trim 3/8" x 5/8" White
TAC V30-1316B25-1 Trim 1/2" x 19/32" Black
TAC V30-1316W25-1 Trim 1/2" x 19/32" White
StanPro Edge ChannelStainless steel edge channel seals the opening between two windows of 3/16" or 1/4" thickness.
Each length is 8' long•STP 75000081
Permastik Foam GasketA premium quality closed-cell neoprene gasket. Excellent resistance to weather and moisture absorption, oil and grease resistant. Adhesive coated 1 mil Mylar backing which prevents stretching during application with subsequent creeping and weakening of bond.GSK CG5351/4x1/2 50' rollGSK CG5351/4x3/4 50' rollGSK CG5353/8x3/4 25' rollGSK CG5351/2x3/4 25' rollGSK CG5351/2x1.5 25' roll
LifeSafe Hatch TapeFor bedding in windows and deck
ttings. Also used as an anti-vibration and water seal for engine hatch covers, etc.
3/4” x 7 feet•LIF RE-3870
Designed to trim un nished edges of boats, such as inwales or coamings, grommets, edges of hatches and other exposed breglass or metal edges. It is designed for fast and permanent installation, without adhesives, on anges from 1/8" to 3/16" thick with a 3/4" minimum radius and with minimum clearance from the edge of 1/2".
Sold by the foot•STP 75000330 White, Steel insertSTP 75000334 Black, Steel insertSTP 75000346 White, Aluminum insertSTP 75000348 Black, Aluminum insert
StanPro Marine Quickedge Plastic Trim
TACO Weather SealWeather Seal is made of durable exible sponge rubber with a heavy duty self-adhesive backing. Use Weather Seal or Hatch Tape anywhere you need a weather tight compartment.Weather seal-sponge rubberTAC V30-0109B10-1 3/8"H x 5/8"W x 10'TAC V30-0202B10-1 1/2"H x 1/2"W x 10'TAC V30-1333B10-1 1/4"H x 3/8"W x 10'
Hatch Seal- medium density closed cell foamTAC V30-0744B8-2 1/8"H x 3/4"W x 8'TAC V30-0748B8-2 1/4"H x 3/4"W x 8'
Designed speci cally for marine use and made of nonmagnetic type 316 stainless steel. The glass slides easily on a heavy plastic strip over a felt cushion, which permits installation screws to be countersunk for proper clearance. The polypropylene pile fabric will not rot or mildew, is UV stabilized and moth proof. Each length is 8'.STP 75000118 Single exibleSTP 75000119 Single rigidSTP 75000120 Double rigid
StanPro Stainless Steel Sliding Window Channel
290
EXTERIO
R H
AR
DW
AR
E
Marine Cork / Starboard
Narrow deck plankSTZ 032.1000.8 1-1/2" x 3/8" x 75"
Margin deck plankSTZ 032.1000.0 3" x 3/8" x 75"
King / shing plankSTZ 032.1001.1 5" x 3/8" x 75"
Deck plankSTZ 032.1001.2 16" x 3/8" x 75"
Accessories:STZ SSONE290 290 ml, adhesive/sealant, blackSTZ SP9102 1000 ml, primer, breglass & metalsSTZ SPMAR 500 ml, marine primer, woodSTZ 032.0510.9 Litre binder, brown, 2 component
The weight of one m2 MARINEDECK 2000 EXTERIOR is approx. 5.5kg without adhesive, caulking material and top coat. The nished
weight per m2 including all materials is approx. 6.5kg
Stazo Marine Cork Marinedeck 2000 ExteriorThe result of advanced research and technology in synthetic marine ooring. The composition, being made of ACMEC (Agglomerated Composite Marinedeck Exterior Composition). ACMEC is a registered trade mark and being manufactured by STAZO marine equipment.
A very special production method together with the synthetic binder enables us to manufacture MARINEDECK 2000 EXTERIOR. The planks, primers, adhesive and deck caulking material being prescribed, incorporate the same component elements to ensure complete compatibility.
The nished product has proven to exceed expectations, resisting exposure to natural elements and most chemicals. MARINEDECK 2000 has stood the test of time in most extreme conditions, proving wear resistant and nearly maintenance free.
Standard deck plankSTZ 032.1000.9 2" x 3/8" x 75"
Sea water resistanceTested for sea water resistance including extended periods with continuously changing temperatures, immersed in sea water with a very high salt content.
UV resistanceTested in both practice and in climate rooms.
All weather resistanceProven not to be effected by temperatures from -40 to +45C0
Strong and exibleBounces back after a short while if abused and can be easily repaired.
MaintenanceSimply wash when dirty with a normal household cleaner. Cleaning also prevents dirt from accumulating.
TACO StarBoard Lumber SheetsMarine Lumber will not rot, de-laminate, swell or splinter, and the matte texture requires no painting, nishing or maintenance. It can be easily cut, routed, shaped and drilled with standard woodworking tools.
TAC P102512WHA27 1/4" x 12" x 27" White
TAC P102524WHA27 1/4" x 24" x 27" White
TAC P105012BLK27 1/2" x 12" x 27" Black
TAC P105012WHA27 1/2" x 12" x 27" White
TAC P105024WHA27 1/2" x 24" x 27" White
TAC P105024WHA54 1/2" x 24" x 54" White
TACP107524WHA54 3/4" x 24" x 54" White
Project Ideas:Bait boards • Sink covers • Trim •Tables • Counter tops •Back splash • Transom door•Instrument panels•Ladder treads • Hatches & doors•