EXTERIOR HARDWARE 233 - AQUA SERVICES · EXTERIOR HARDWARE 233 Wipers & Accessories Wipers 234 - 239 Windshield Wash Systems 240 Cleats, Chocks & Deck Pipes 241 - 245 Deck Fills 246

EXTERIOR HARDWARE 233

Wipers & Accessories Wipers 234 - 239

Windshield Wash Systems 240

Cleats, Chocks & Deck Pipes 241 - 245

Deck Fills 246 - 249

Rail Fittings Rail Fittings 251 - 254

Handrails 254 - 255

Boat Top Fittings 255 - 257

Ladders, Steps & Non-Slip 258 - 262

Flags & Flag Holders 263 - 264

Ventilation Blowers 265 - 266

Ventilators 266 - 271

Tank Vents 271 - 272

Deck Plates 273 - 274

Hatches & Portlights 274 - 278

Oceanair Shades 279

Hatch Adjusters 280 - 283

Moldings & Rub Rail Molding / Rub Rail / Trim 285 - 289

Weather Seal 289

Stazo Marinedeck / Starboard 290

234

EXTERIO

R H

AR

DW

AR

E

Speich Windshield Wipers

Speich Clear View ScreenSPEICH Clear view screens keep a glass disk free from rain, snow or sea-water by fast rotation. The motor is placed in the centre and is fastened to the xed glass so as to obtain the largest possible eld of vision. This particular assembly also makes the unit water and airtight, thus making it suitable for pressurised and air-conditioned bridges. All metal parts are made of brass.SWP AC38S.H-24V* Heated screen 24V

*Request Item - Call to get delivery estimate

Speich from Italy is a specialized high quality manufacturer of wind shield

wiper blades, arms, motors, clear view units, control panels and washing devices. They build according to demanding standards, such as ISO 9002, and do work for such customers as the Italian Navy.

Speich Nautic E SeriesType ‘E’ range of motors for small to medium size boats with wiper arms up to 550mm in length. This motor unit is available in 12 or 24 volts, has two speeds, is a self-parking device and has variable wiping angles (45°, 50° 60°, 70°, 80°, 90°, 100°, 110°). SWP E-1238* 12V, 5-12 mm mounting thicknessSWP E-1264 12V, 15-35 mm mounting thicknessSWP E-1290* 12V, 36-60 mm mounting thicknessSWP E-2438* 24V, 5-12 mm mounting thickness


Speich Commercial Wiper ArmsAdjustable between 11 and 22"•Fits on any 1/2" shaft•316 S/S with brushed nish•Very heavy duty•Fits standard blades•

SWP E-95-P Pantographic StyleSWP E-95-F Pendulum Style

Speich Nautic 'LP' SeriesType 'LP' range is available for 12V and 24V DC, has two speeds, is a self-parking device, and has a variable wiping angle It’s easy to modify the motor unit wiping angle and park position side with the system already installed. SWP LP-1240* 12V 40 mm±5SWP LP-2440* 24V 40 mm±5


Rocker switch.SWP ESB 12 - 24 V

Speich Heavy Duty Wiper SystemsHeavy duty wiper systems for large yacht and commercial applications. All systems are custom engineered for each situation. Motor unit type M is designed to be used on medium sized windscreen wipers installed on work boats for civil and military applications. This motor has a variable wiping angle and it is designed for heavy duty applications. Self-parking position, can be set either left or right. Available rated voltage DC: 12V - 24V - 110V - 220V, AC: 110V - 220V. Motor unit type S is used with arms up to 1200mm and blades up to 1300mm in length are needed. This motor has variable wiping angle and it is designed for heavy duty applications. Self-parking position, can be set either left or right. Motor unit type SF is used when it is necessary to employ a powerful wiper with arms up to 1200mm and blades up to 1300mm length. This motor units is equipped with an electromagnetic brake in order to have a stable park position.

Speich Commercial Wiper BladesAvailable in three styles:

MG series for all at surfaces 300,350,400,450,500mm lengths•AR series for at and curved surfaces (anti ice cover). 390, •470mm lengthsBH series for at and curved surfaces 600, 700, 800, 1000mm •lengths

Speich Commercial Wiper ArmsAll arms are custom made using AISI316 stainless steel with the standard nish being hand-polished (Black arms are available on request).

Please call us or visit www.speich.it for more information

EXTERIO

R H

AR

DW

AR

E235Windshield Wipers

AFI 1000 Series Heavy Duty Wipers & KitsWaterproof housing made of stabilized high impact thermal plastic. Maximum current draw- 5 amps. Up to 16" x 16" arm x blade combination recommended. Kit includes #31012B 14" polymer blade and #33007 deluxe adjustable arm. Self parking left or right.

12 volts•6-5/8" L x 3-3/8" W x 2" H•3 year warranty•

Part # DescriptionShaft Dia.

Shaft Length Sweep

AFI 37100 Frame mount kit 5/8" 2-1/2" 80o


AFI 37110 Motor only 5/8" 2-1/2" 110o

AFI 37180 Motor only 5/8" 2-1/2" 80°

5/8" Diameter shaft•Left or right parking•Accommodates blades 16" to 24"•12 Volt draws max., 3.5 amp•Includes 5 amp fuse and holder•2 Speed motor•Selectable 45• o, 60o, 80o or 110o sweepCompact size- 7-7/16"L x 4"W x 2"H•12 volts•3 year warranty•Not recommended for exterior use•

AFI 34000 12 Volt, 2-1/2" Shaft, 80°AFI 34001 12 Volt, 1-1/2" Shaft, 80°AFI 34005 12 Volt, 3-1/2" Shaft, 80°AFI 34011 12 Volt, 1-1/2" Shaft, 110°AFI 34210 24 Volt, 2-1/2" Shaft, 110°Requires the use of a three position switch.Parts:

C/H 75212-04 3-Position switch (Off/Park-Low-High)AFI 33025 Motor cover White

AFI “MRV” Heavy Duty Wiper Motors

AFI HD 1.5 Wiper Motors

Powers a 22” Deluxe arm and Deluxe blade combination or a •20” Premier arm and Premier blade combination Includes 5 amp fuse and holder •Measures approximately 7-3/4” L x 4” W x 2-3/4”•

AFI 71011 1” Shaft, 110°AFI 71012 2”Shaft, 110°AFI 71081 1” Shaft, 80°AFI 71082 2” Shaft, 80°

AFI HD 2.5 Wiper Motors

Powers a 26” Deluxe arm and Deluxe blade •combination or a 24” Premier arm and Premier blade combination Includes 6 amp fuse and holder •Measures approximately 7-7/8” L x 4-1/4” W x 3”•

AFI 82011 1” Shaft, 110° AFI 82012 2” Shaft, 110°AFI 82081 1” Shaft, 80°AFI 82082 2” Shaft, 80°

AFI Heavy Duty Wiper Motors

Common features:Fully sealed powder coated aluminum •waterproof base and housing Factory preset sweep angles of 80° or 110°, with easy •adjustment to 45° or 60° Chrome plated solid brass knurled drive nut with brass and •stainless steel drive shaft Two speed motor •Sealed 6” wire leads, 16 AWG •Adjustable right or left self parking (coast to park)•5/8” diameter shaft (16mm) •RF shielded circuitry lters noise from electronics•12 volts•3 year warranty•

236

EXTERIO

R H

AR

DW

AR

E

Windshield Wipers

EXTERIO

R H

AR

DW

AR


AFI Model AFI-500Standard Wipers & KitsWaterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic.

Maximum current draw: 2 amps•Includes 11" deluxe curved blade 33004 •and deluxe adjustable arm 33006ASAdjustable sweep right or left•Self parking•12 volts•


Shaft Length Sweep



Parts:AFI 33000 Deck mount adapter for wipers w/ 1/2" shaft

AFI Model STD Standard Wiper KitsCase construction is of •corrosion-proof, aluminum alloyBase plate and mounting plate •are naval brass with heavy chrome platingBlack crackle, nonre ective •

nishIncludes 11" deluxe curved blade •33004 and deluxe adjustable arm 33006ASSelf parking•Not waterproof - Interior installations only•12 volts•


Shaft Length Sweep

AFI 32000 Frame mount 3/8" 2-1/2" 80o

AFI 32001 Deck mount 1/2" 3-1/2" 80o

AFI 32002 Frame mount 3/8" 2-1/2" 110o


AFI Model WMW Standard Wiper Kit

Totally sealed, 100% water resistant wiper. The corrosion resistant case and shaft housing are made of heavy, chrome-plated brass. Front plate and wiper shaft are manufactured from stainless steel.

Includes 11" deluxe curved blade •33004 and deluxe adjustable arm 33006ASMax. current draw: 5 amps•12 volts•


Shaft Length Sweep

AFI 30002 Frame mount 3/8" 2-1/2" 110°


AFI Deluxe S/S Wiper ArmsFit on 5/8" shafts•Articulating/bend back feature•Set screw motor shaft clamping•

AFI 33006A 6-3/4" to 10-1/2"AFI 33007A 10" to 14"AFI 33010A 14" to 20"

Black epoxy coated stainless steel•AFI 33012A* 10" to 14"AFI 33014A* 14" to 20"

Pantographic Wiper Arms

Adjustable pantographic stainless steel arm•AFI 33032A 12" to 17"AFI 33037A 17" to 22"

AFI Premier S/S Wiper Arms316 Stainless Steel and brass construction•Features “Articulating/Bend-Back” design that locks •the arm in an upright position for window cleaningChrome plated solid brass motor shaft mount with set •screw for a secure installationFit on 5/8” shafts•

*Wet version has a built-in, two sided spray head and hose (with 18” lead). Premier Arms:AFI 33082 10" - 12"AFI 33082W 10" - 12" WetAFI 33084 15" - 20"AFI 33084W 15" - 20" WetAFI 33086 20" - 25"AFI 33086W 20" - 25" WetAFI 33088 25" - 30"

Pantographic Premier Arms:AFI 33090 12" - 17"AFI 33090W 12" - 17" WetAFI 33092 17" - 22"AFI 33092W 17" - 22" WetAFI 33094 22" - 26"AFI 33096 26" - 30"

Parts:AFI 33008 Allows for use of deluxe arms on 30000

and 32000 series wiper motors.

238

EXTERIO

R H

AR

DW

AR

E

Windshield Wipers

United Technologies208 & 212 Series Wiper Motors

Oscillating wiper motor produces 5.9 lbs (208) &•8.85 lbs (212) of torqueRFI suppression lter noise from electronics•Available in 65°, 85° or 110° sweeps•Con gurable in a clockwise or counterclockwise park•1", 2" and 3" shaft lengths available•Brass pivot body•Stainless steel pivot shaft•12 Volt•Marine grade speci cations•208 Series L: 8.3" x W: 4.01"•212 Series L: 8.33" x W: 3.82"•

Part # Shaft SweepMax. Blade

UTP AMP-208-2000 1" 65° 18"

UTP AMP-208-2001 1" 85° 17"

UTP AMP-208-2003 1" 110° 15"

UTP AMP-208-2200 2" 65° 18"

UTP AMP-208-2201 2" 85° 17"

UTP AMP-208-2203 2" 110° 15"

UTP AMP-212-2000 1" 65° 22"

UTP AMP-212-2001 1" 85° 20"

UTP AMP-212-2003 1" 110° 18"

UTP AMP-212-2200 2" 65° 22"

UTP AMP-212-2201 2" 85° 20"

UTP AMP-212-2203 2" 110° 18"

UTP AMP-212-2400 3" 65° 22"

UTP AMP-212-2401 3" 85° 20"

UTP AMP-212-2403 3" 110° 18"

AFI Polymer Wiper BladesDeluxe style - curved blade. These wipers are developed speci cally for marine use. The wiper is made of glass-impregnated poly and will never rust. Utilizes marine grade rubber squeegee for long life. Black.AFI 31012B 12"AFI 31014B 14"AFI 31016B 16"AFI 31018B 18"AFI 31020B 20"AFI 31022B 22"AFI 31024B 24"

AFI Deluxe S/S Wiper BladesCurved blade•"Slide and Lock" system•

AFI 33004 11"AFI 33005 14"AFI 33015 16"AFI 33016 18"AFI 33017 20"

AFI Classic Straight S/S Wiper Blade

Replaces blades on boats manufactured before 1990. Straight - Hook & Catch.

Not for use with AFI deluxe •and standard arms

AFI 33901 11"

AFI Premier S/S Wiper BladesMarine grade silicone squeegee•Multiple 'claws' help spread pressure evenly•Made from 316 stainless steel•

AFI 33021S 20"AFI 33022S 22"AFI 33024S 24"

EXTERIO

R H

AR

DW

AR


United Technologies Flex Wiper BladesFlexible for curved or at glass•Re llable molded wiper elements•Galvanized frames, powder coated•

UTP AMP-302-1120 12"UTP AMP-302-1140 14"UTP AMP-302-1160 16"UTP AMP-302-1180 18"UTP AMP-302-1200 20"UTP AMP-302-1220 22"UTP AMP-302-1280 28"

United Technologies Pantographic Wiper Arms

Made of stainless steel at wire•Flip back for cleaning•Includes mounting bolt and nut•

UTP AMP-341-1140 14" ArmUTP AMP-341-1141 14" Arm w/ adapter*UTP AMP-341-1160 16" ArmUTP AMP-341-1161 16" Arm w/ adapter*UTP AMP-341-1180 18" ArmUTP AMP-341-1200 20" ArmUTP AMP-341-1220 22" Arm

United Technologies Adjustable Wiper ArmsMade of stainless steel at wire•Flip back for cleaning•Black nish•Hook blade connection•Rotatable head•

UTP AMP-341-5001 11" to 15.5"UTP AMP-341-5002 14.5" to 19.5"

Parts:UTP AMP-305-1015 Pantographic adaptor breglassUTP AMP-305-1021 Pantographic adaptor metal & glassUTP AMP-312-1035* 4 Litre washer bottleUTP AMP-313-1016 Fitting kitUTP AMP-313-1019* Wet kit for armsUTP AMP-314-1009 50' x 3/16" ID hoseUTP AMP-334-1008 Black motor cover w/ switchUTP AMP-334-1009 Black motor coverUTP AMP-334-1012 Sand motor coverUTP AMP-404-1001 3/16" x 3/16" x 3/16" hose T

*Includes adapter AMP-305-1015 for breglass mounting with self-tapping screws.

*Request Item

United Technologies Wiper Arm & Blades

Top quality stainless steel construction.Straight blades for at windshields.UTP LE-721156S 10" - 14" adjustable armUTP BD-721020-12" Straight bladeUTP BD-721020-14" Straight blade

United Technologies Wiper MotorsParts exposed to the weather are corrosion resistant. An `O' ring between the shaft and bearing stud prevents water from entering.

Preset for 110• o sweep (adjustable 85o, 100o, or 120o)12 Volt•Shaft diameter: 5/8"•Not self parking•

Part # Shaft Length

UTP WWF 12C18 710 1"

UTP WWF 12C18 720 2"

UTP WWF 12C18 730 3"

This wiper motor has the same quality features as the above WWF motors. It also has an integral on-off switchPreset at 65° (adjustable to 85°, 100°, 110° and 120°)

Not self parking•Part # Shaft Length

UTP WWF 12C19 710 1"

UTP WWF 12C19 720 2"

240

EXTERIO

R H

AR

DW

AR

E

Windshield Wipers / Wash Systems

AFI Windshield Washer KitKit includes everything needed for the installation of a washer system on two AFI Deluxe wiper arms.Includes: water tank, 12V pump motor, two thru-deck nozzles, tee tting, two spray nozzles, 16’ of below deck clear plastic tubing, and 8’ of above deck black tubing. Also includes 4 clips to attach tubing to the extension portion of wiper arm, and 4 clips to attach tubing to the main portion of the arm.

Designed to install on AFI Deluxe wiper arms and blades•(may not be compatible with other brands)Easy to install using basic tools•Each spray head has four adjustable nozzles•Spray nozzles snap onto the end of the wiper arm providing •complete spray coverageWater tank capacity: 3 Litres/3.2 quarts•Water tank dimensions: 9-1/4” H x 7” W x 4-1/2” D•

User supplied items needed for installation: 3A fuse and carrier, 3A minimum momentary on/off switch, and black and white stranded wire.AFI 33505

Perko Hand Windshield WiperFor straight and curved windshields. Stainless steel arm and blade holder, other parts chrome plated zinc. Arm can be extended from 6-3/4" to 10-1/2". 3/8" shaft diameter. 1-1/8" maximum panel thickness. Handle length 2-3/8". Blade length 12".PER 533-DP-STS

Sea-Dog Manual Windshield Wiper

Combination chromed brass & stainless steel construction, comes with an 11" blade. For up to 1-5/16" panel thickness.SED 412601-1

Tridon All-Season Wiper BladesThese wiper blades handle any type of weather. They won’t rust or bend out of shape, prolonging the life of the blade. Easy installation, features a pre-attached adaptor that ts 95% of all arm types directly. Also equipped with a poly-coated squeegee, delivering a streak-free wipe every time, and new aerodynamic design helps resist wind lift.TRI AS-11 11" TRI AS-13 13" TRI AS-15 15" TRI AS-16 16" TRI AS-24 24"

Sea-Dog Removable Manual Windshield Wiper

Injected molded nylon/formed 304 stainless. Wiper removes easily from windshield in seconds. Includes 11” lexan blade.SED 412605-1

Sea-Dog Marine Windshield Wiper

Self parking windshield wiper•Stamped 304 stainless cover•Pre-wired for 12 volt DC systems•110• o sweep1/4" shaft•

SED 410810-1 Motor onlySED 410811-1 Complete kit. 8"-12" arm with 11" blade

EXTERIO

R H

AR

DW

AR

E241Pop-Up Cleats

Whitecap E-Z Push-Up CleatsNo saw needed to install, just drill & drop into place. Stainless steel construction.

Part # A B C D E F Max. Rope

WHI 6804C 5-1/7" 1-1/8" 3-5/16" 4-1/2" 3/4" 5/16" 1"

WHI 6809C 6-1/2" 1-1/2" 3-9/16" 6" 7/8" 3/8" 1-1/4"

WHI 6810C 8-3/4" 1-5/8" 4-9/16" 8" 1-1/8" 3/8" 1-1/2"

Attwood Pull-Up CleatsThis cleat recesses ush to the deck for a clean, contemporary look at an affordable price. Corrosion-resistant 316 stainless steel construction. Water-resistant cleat recesses into cast body, and is captured with lubricated seals.

Easy to operate–simply pull up the cleat from its body•Designed for safety–cleat recesses below deck when not in use•Water resistant–cleat recesses into cast body and is captured with rubber seals and ball detents•Durable–cast stainless steel construction and simple design assures long-life and dependable operation •Stud mount, ush cleat•

Part # Description A B C D

ATT 66512-7 4-1/2" 5-1/4" 4-1/2" 3-1/8" 2"

ATT 66516-7 6" 7" 6" 3-1/3" 2-3/8"

ATT 66524-1 8" 8-1/2" 7-3/4" 3-7/8" 2-13/16"

ATT 1484-1 Drainage Receptacle For 4-1/2" Cleat

Attwood Stainless Steel Neat CleatsThis all-new cleat is retractable, with a slim pro le that installs easily on narrow gunwales. The cleat stays up when pulled up and, when lowered, it is only 1/2" above deck. It has a neat, continuous contour to prevent snags and stubbed toes. Each post is a 7/16"-thick rod of solid stainless steel. Drainage receptacles (included) press- t onto the threaded studs to capture moisture and send it to the bilge. The receptacle outlet is sized for standard 1/4" pitot tubing (not included).

Part # A B C D E F G

ATT 66515-7 4-1/2" 1-5/16" 1/2" 1-5/8" 1-1/4" 1-3/4" 3"

ATT 66517-7 6" 1-1/2" 1/2" 1-5/8" 1-1/4" 2-1/4" 3"

Accon Marine Folding Stainless Cleats

Mounts on surface of boat•No cut-outs or hole saws required •Cleat locks down when not needed, •and springs up when locking slide is retractedNo drain tubes or drain receptacles required•Constructed of marine grade 316 cast stainless steel (screws - •not supplied)

ACC 333-4 2-3/8" x 6-1/4"ACC 332-6 3-1/4" x 7-1/2"

Sea-Dog Folding Stud Mount CleatInvestment cast 316 stainless steel construction.SED 041404-1

242

EXTERIO

R H

AR

DW

AR

E

Pop-Up Cleats / Cleats

Whitecap Pop-Up CleatSpring loaded cleat can be mounted horizontally or vertically. Holds fenders, when open and is only 5/8" high when closed. Requires (3) 3/16" fasteners.WHI 6970C

Sea-Dog Herreshoff Pattern S/S Cleats

Investment cast 316 stainless steel.Part # A B C D Fastener

SED 041604-1 4" 5/16" 1-3/4" 1" #10 FH

SED 041605-1 5" 1-1/8" 2-1/8" 1" #10 FH

SED 041606-1 6" 1-1/4" 2-1/4" 1-1/8" 1/4" FH

SED 041608-1 8" 1-1/2" 2-13/16" 1-3/8" 1/4" FH

SED 041610-1 10" 1-7/8" 3-5/8" 1-3/4" 5/16" FH

SED 041612-1 12" 2-1/8" 3-3/4" 1-7/8" 5/16" FH

Heavy Duty:

SED 041708 8" 2" 3-5/16" 1-3/4" 1/4" FH

SED 041710 10" 2-3/8" 3-3/4" 1-7/8" 5/16" FH

Marine HardwareS/S Hollow Base CleatsManufactured in 316 S/S and polished for extremely bright nish. 100,000 pounds of tensile strength. Holes machine drilled and are counter sunk for at or oval head fasteners.

8" cleat, height: 1-3/4"•Uses 1/4" F.H. fasteners•

MHI SSCL66010

10" cleat, height: 2"•Uses 5/16" F.H. fasteners•

MHI SSCL66011

Marine Hardware Stainless Steel CleatsHighly polished investment cast 316 S/S cleats for mega yacht application. Euro style.

Uses 5/16" fasteners•MHI SSCL66012-4HE 12”MHI SSCL66015-4HE 15”MHI SSCL66018-4HE 18”

Sea-Dog Open Base Cleat

Die cast zinc, chrome plated•These cleats are interchangeable with Perko style 1188 cleats•

Part # A B C D Fastener

SED 044604-1 4" 1-1/4" 1-1/2" 1-1/16" #10 FH

SED 044606-1 6" 1-9/16" 2-1/4" 1-3/16" #10 FH

SED 044608-1 8" 1-13/16" 3-1/4" 1-7/16" 1/4" FH

SED 044610-1 10" 2" 4" 1-11/16" 1/4" FH

Sea-Dog Closed Base Cleats

Polished cast brass•Part # A B C D Fastener

SED 042103-1 3-3/16" 13/16" 11/16" 9/16" #6 FH

SED 042104-1 4" 1" 3/4" 1-11/16" #12 FH

SED 042105-1 5" 1-1/4" 1" 1-15/16" #12 FH

Sea-Dog Line Cleats

Made from polished cast brass•Part # A B C D Fastener

SED 672110-1 2-1/2" 1/2" 1/2" 1" #6 FH

SED 672115-1 4-1/16" 3/4" 11/16" 1-1/2" #8 FH

Sea-Dog Low Pro le S/S Cleats

Investment cast 316 stainless steel•Part # A B C D Fastener

SED 041906-1 6" 1-1/4" 2-1/16" 1-5/8" 1/4" FH

SED 041908-1 8" 1-11/16" 2-1/4" 1-5/8" 1/4" FH

EXTERIO

R H

AR

DW

AR

E243Cleats

Sea-Dog 4-Hole Cleats

Die cast zinc chrome plated•Part # A B C D Fastener

SED 044104-1 4-1/2" 1-1/16" 1-3/4" 1-3/16" #8 FH

SED 044106-1 6" 1-3/8" 2-3/16" 1-9/16" #10 FH

Perko Streamline Cleats

Chrome plated zinc. 2 per card•Part # Length Base Size Max Line

PER 566-DP2-CHR 2" 2-3/16" x 1-1/8" 5/16"

PER 566-DP3-CHR 3" 3-1/8" x 1-1/2" 3/8"

PER 566-DP4-CHR 4-1/2" 4-7/16" x 1-7/8" 1/2"

Perko Chrome Cleats

Chrome plated zinc/black plastic•Closed base type•

Length Base Max Line Fastener Qty

PER 1305-DP1-CHR4-1/2" 3-3/4" x 1-1/16" 3/8" #10 2/card

PER 1305-DP2-CHR 6" 5" x 1-3/8" 1/2" 1/4" 1/card

Perko Chrome Cleats

Chrome plated zinc/black plastic•Open base type•

Length Base Max Line Fastener Qty

PER 1306-DP1-CHR4-1/2" 2-1/2" x 1-1/16" 3/8" #10 2/card

PER 1306-DP2-CHR 6" 3-1/2" x 1-3/8" 1/2" 1/4" 1/card

Attwood Hollow Base Cleats

Die-cast ZAMAK with dual nickel •and chrome plating. 2 per card

Part # Length Fasteners

ATT 6244-6 4-1/2" #8

ATT 6245-6 6" #10

Perko Chrome Open Base CleatChrome plated zinc with black plastic base. New streamlined appearance.

Length: 5-3/4"•Base: 3-5/8" x 7/8"•Max rope size: 1/2"•Uses 1/4" fasteners•

PER 1326-DP2-CHR

Perko Open Base Cleats

Chrome plated zinc•Stainless steel 1/4" x 2" studs, nuts & washers •

Part # Length Base Dimension Max Line

PER 1210-004-CHR 4" 2-1/8" x 1-1/2" 5/16"

PER 1210-006-CHR 6" 3" x 1-3/4" 7/16"

Perko Cast Aluminum Cleats

Plain aluminum nish•

Part # Length Base SizeMax Line

Screw Size

PER 530-008-ALU 8" 4" x 2-1/4" 3/4" 1/2"

PER 530-010-ALU 10" 4-1/2" x 3" 7/8" 1/2"

PER 530-012-ALU 12" 6-1/2" x 2-7/8" 1" 5/8"

Perko Cast Aluminum Cleats

Plain aluminum nish•

Part # Pack Base Size LMax Line

Screw Size

Closed Base

PER 545-DP3-ALU 2/CD 1-1/2" x 5/8" 3" 1/4" #8

PER 545-DP4-ALU 2/CD 1-5/8" x 3/4" 4" 5/16" #10

PER 545-DP5-ALU 2/CD 2" x 7/8" 5" 3/8" 1/4"

Open Base

PER 545-DP8-ALU 1/CD 2-5/8" x 1-7/8" 8" 5/8" 1/4"

► Also See: Dock Cleats pg 856-857

244

EXTERIO

R H

AR

DW

AR

E

Cleats / Chocks

Forespar Marelon Cleats

Molded from high-strength Marelon® for strength, light weight and low cost. The use of Marelon® allows these cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion - will not soften on hot days or freeze in winter.

Part # Length Hole Dia

FRS 941018 3" 5/32"

FRS 941016 4" 3/16"

FRS 941013 5" 3/16"

FRS 941014 6-1/2" 1/4"

FRS 941015 8" 1/4"

Sea-Dog Nylon Open Base Cleats

Injection molded nylon•Part # A B C D Fast

Black

SED 043030 3" 1-1/16" 1" 1-5/8" #6 FH

SED 043030-1* 3" 1-1/16" 1" 1-5/8" #6 FH

SED 043040-1* 4" 7/8" 1-1/8" 2" #8 FH

SED 043050 5" 1-1/16" 1-7/16" 2-1/2" #10 FH

SED 043080-1* 8" 1-11/16" 2" 3-3/8" 1/4" FH

* 2/CD

White

SED 043031 3" 1-1/16" 1" 1-5/8" #6 FH

SED 043041 4" 7/8" 1-1/8" 2" #8 FH

SED 043051 5" 1-1/16" 1-7/16" 2-1/2" #10 FH

Sea-Dog Aluminum Cleats

Sand cast aluminum•Part # Length Height Fastener Style

SED 046106-1 6" 1-3/8" 1/4" FH Closed base

SED 046108-1 8" 1-7/8" 5/16" FH Open base

SED 046110 10" 2-1/4" 3/8" FH Open base

Sea-Dog Zinc Skene ChockDie cast zinc, chrome plated •Sold in pairs•Uses #10 FH fasteners•

SED 064030-1

Sea-Dog Stainless Steel Bow ChockInvestment cast 316 stainless •Sold in pairs•Uses #10 FH fasteners•

SED 060040-1

Sea-Dog Stainless Steel Straight Chocks

Investment cast 316 stainless•Sold by the each•

Part # A B C D Fast

SED 060200-1 5" 3/4" 1-1/16" 3-15/16" #10 FH

SED 060210-1 6" 1" 1-13/16" 5" 1/4" FH

Sea-Dog Nylon Heavy Duty Cleats

Injection molded nylon•2 per card•

Part # A B C D Fast

SED 043340-1 4-1/4" 1" 1-1/4" 1-3/4" #10 FH

SED 043360-1 6-1/16" 1-1/4" 1-9/16" 2-1/4" #6 FH

SED 043380-1 8-1/16" 1-3/4" 2-1/4" N/A #8 FH

Marine East Nylon CleatStrong black nylon cleat is UV resistant.

Length 3.420" x Height 0.78"•MEP 2100

► Also See: Clam Cleats pg 769

EXTERIO

R H

AR

DW

AR

E245Chocks / Hawse Pipes / Deck Pipes

Sea-Dog Nylon Skene Chock

Injection molded black nylon•Sold in pairs•

Part # A B C D Fast

SED 067360-1 4-1/2" 7/16" 1/2" 3-5/8" #10 FH

Sea-Dog Stainless Steel Skene Chocks

Investment cast 316 stainless•Sold in pairs•

Part # A B C D Fast

SED 060060-1 4-1/2" 13/16" 11/16" 3-15/16" #10 FH

SED 060065-1 6" 1-1/8" 13/16" 4-5/8" 1/4" FH

Perko Mooring BitChrome plated bronze hollow mooring bit.

Uses 1/4" bolt fasteners•4-1/4" x 4-1/4" x 3-1/2"•

PER 608-002-CHR

Sea-Dog Hawse PipeInvestment cast 316 stainless steel•L: 9-1/4" x W: 2-7/8"•Uses #10 FH fasteners•

SED 328170

Sea-Dog Hawse PipeInvestment cast 316 stainless steel•L: 5-1/2" x W: 2-1/2" x D: 7/8"•Uses #10 FH fasteners•

SED 328160

Perko Hawse Hole PlateCast bronze, chrome plated •Spigot: 1-1/4" •Outside dimensions: 4-1/4" x 6"•Inside dimensions: 2-1/8" x 4-1/8"•Uses #1/4" fasteners•

PER 752-000-CHR

Perko Rope Deck PipeChrome plated zinc•For rope up to 1" diameter •Flange diameter: 3-3/8"•Uses #8 fasteners•

PER 757-DP-CHR

Perko Plastic Rope Deck PipesFibre reinforced, U.V. stabilized plastic deck pipe with a hinged, snap-down cover.

For ropes up to 7/8"•Flange diameter: 3-3/4"•Use #8 screws•

PER 1057-DP-BLK Black PER 1057-DP-WHT White

Sea-Dog Rope Deck PipeChrome plated brass•For rope up to 1" diameter•Dia: 3-1/8" x Centre: 1-1/2" •Uses #8 FH fasteners•

SED 322080-1

Sea-Dog Stainless Steel Hinged Deck PipeInvestment cast 316 stainless, hinge prevents loss of cap.

Uses #10 FH screws•L: 5-5/8" x W: 4-1/16" x Centre:2-3/4"•

SED 321805

Sea-Dog Stainless Steel Chain Deck PipeInvestment cast 316 stainless, comes with cap tether and cap securing hook.

Uses #10 FH screws•L: 5-5/8" x W: 4-1/16" x Centre: 2-1/2"•

SED 321800Parts:

SED 321810-1 Cap & chain

Sea-Dog Chrome Brass Chain Deck PipeComes with cap tether chain, cap securing hook, and rubber gasket.

For maximum 3/8" chain and 1" rope•L: 6-1/4" x W: 4-1/2" x Centre: 2-1/4"•Uses #8 FH fasteners•

SED 322070Parts:

SED 322075-1 Replacement cap and chain only

246

EXTERIO

R H

AR

DW

AR

E

Deck Fills

Perko Chrome Locking Gas Cap

Locking caps come with 2 keys •Fits Perko 0520, 0527, 0528, 0557, 0599 & 1270 •series lls

PER 1324-DP1-BLK Spare locking cap Perko Combination Fill and Tank VentsPlastic, ip top ll incorporates an integral tank vent with ame arrester. Fuel splash back returns down the ll neck instead of overboard when

lling. With the lid closed continuous venting is provided while effectively preventing water intrusion. All plastic construction eliminates the need for installation of ground wire.

Uses #10 FH fasteners•PER 1318-DPG-BLK Black gas 35° angled neckPER 1319-DPG-BLK Black gasPER 1319-DPW-BLK Black waterPER 1319-DPG-WHT White gas

Accessories:Fuel system locking insert for 1-1/2” vented lls

Black plastic with zinc alloy lock cylinder •Dual purpose key opens ll cap & locking insert •Fits most Perko vented lls•

PER 525-DP0-BLK

Perko Deck Fills For HoseChrome plated bronze. Fill type marked on ange. Cap has slot between holes, O-ring and integral retainer. Comes with deck key.

Fits 1-1/2" I.D. hose •Flange diameter: 3-1/8"•Length neck: 3-1/2"•Uses #8 FH fasteners•

PER 520-DPD-CHR DieselPER 520-DPG-CHR GasPER 520-DPW-CHR WaterPER 507-DP-CHR Waste (No retainer on cap)

Parts:PER 520-DP-99A Spare cap and O-ringPER 513-DP8 Spare O-rings 2/pkgPER 507-DP-99A Spare waste cap & O-ringPER 1324-DP1-BLK Spare locking cap

Perko Deck Fills For HoseChrome plated zinc. Fill type marked on ange and cap. Black plastic caps have a slot between holes, O-ring and integral retainer. Comes with deck key.

Fits 1-1/2" hose•Flange diameter: 3-1/2"•Length neck: 2-1/2"•Uses #8 FH fasteners•

PER 1270-DPD-CHR DieselPER 1270-DPG-CHR GasPER 1270-DPW-CHR WaterPER 1269-DP-CHR Waste (No retainer on cap)

Parts:PER 1269-DP-99A Cap only (Waste)PER 1270-DPG-99A Cap only (Gas)PER 1270-DPW-99A Cap only (Water)PER 1270-DPD-99A Cap only (Diesel)PER 513-DP8 Spare o-ring, 2/pkg

Perko Plastic Gas FillBlack plastic, bre reinforced, U.V. stabilized. Easy-grip cap comes with O-ring and integral retainer. No deck plate key required.

Takes 1-1/2" I.D. hose•O.D. 3-1/16"•Length neck 2-7/16"•

PER 1613-DP-BLKParts:

PER 513-DP8 Spare o-ring, 2/pkg

Perko Fuel Fill Locking InsertJust open the ll cap, insert lock cylinder, remove the key and replace the cap. Comes with 2 dual purpose lock/deck keys.

Fits most Perko vented lls•PER 525-DP0-BLK

Perko Fuel Fill Replacement Cap

Replacement cap and O-ring ts Perko 528 •series 1-1/2" fuel/water lls for pipe.

PER 528-DP8-99A CapPER 513-007 O-ring 2/pkg

Perko Chrome Locking Gas CapLocking caps come with 2 keys •Fits Perko 1313 & 1399 series lls & Mirax •M-79 & Tempo 109 DPF lls

PER 1324-DP0-BLK Spare locking cap

Chrome Locking Gas Fill

Same as above but with locking feature.Uses #6 FH fasteners•

PER 1399-DP-CHR Gas

Parts:PER 1324-DP0-BLK Spare locking cap

Perko Chrome Deck FillsChrome plated zinc and black plastic, impervious to fuel. Complete with grounding lug and screw. Cap has integral retainer and has a gasket to assure water tightness.

Overall diameter: 3-1/8"•Hose size: 1-1/2•

PER 1313-DP-CHR GasPER 126-DP-BLK Spare Cap

EXTERIO

R H

AR

DW

AR

E247Deck Fills

Perko Combination Gas Fill & Tank VentsAngled head deck ll combined with the tank vent. Vent ame arrester and anti-surge valve. Requires deck plate key and #8 fasteners. Use with approved 1-1/2" fuel ll and 5/8" vent hose.

Uses #8 FH fasteners•PER 540-DPG-CHR Chrome cap & plastic basePER 542-DPG-BLK Black plastic cap & basePER 542-DPG-WHT White plastic cap & base

Parts:PER 540-DPG-99A Spare chrome cap with chainPER 525-DP0-BLK Lock

Attwood "Indy" Stainless Steel Gas FillContemporary high-performance style deck ll designed especially for high-performance-oriented cruisers and run-a-bouts. Low-pro le, highly-polished cast 316 stainless steel. Spring-loaded hinged cap.

Hose size: 1-1/2" •3-1/4" x 4-1/2" x 1" H above deck •Installation hole size: 1-7/8"•

ATT 66344-1

Marelon Deck FillsMolded in high-strength non-corrosive Marelon® for lifetime durability. Deck lls are available in three colour-coded models. Each clearly marked for use with either water, fuel or waste. Easy-open cap is tted with nylon retaining cord and rubber O-ring to ensure a safe and ef cient seal. Hose: 1-1/2"

Flange: 4", Cutout: 2-1/8", Length: 3"•MPS 907002 FuelMPS 907003 WaterMPS 907004 Waste

Whitecap Push-Up Deck Fills316 Stainless steel construction deck lls have a unique pop-up key for cap removal. Colour coded and imprinted to international standards. For 1-1/2" hose with a 3" ange. Uses #10 screws.WHI 6993C GasWHI 6994C DieselWHI 6995C WaterWHI 6996C Waste

WhitecapPush-Up Replacement CapStainless steel replacement cap with 'hiding push key' ts most standard 1-1/2" deck lls.WHI 6961C

Sea-Dog Gas Deck FillGas deck ll with splash guard•Die cast chrome plated zinc•Fitting for 1-1/2" hose•Use #10 FH fasteners•

SED 351750-1Parts:

SED 351755-1 Replacement cap

Sea-Dog Stainless Steel HoseDeck Fills

Comes with cap, safety chain •Investment cast 316 •Use #10 fasteners•

Part # Hose Barb Marking Flange Dia.

SED 351320-1 1-1/2" Gas 3"

SED 351321-1 1-1/2" Diesel 3"

SED 351322-1 1-1/2" Water 3"

SED 351323-1 1-1/2" Waste 3"

SED 351330 2" Gas 3-1/2"

SED 351331 2" Diesel 3-1/2"

Parts:SED 351390-1 Replacement cap (1-1/2")SED 351392-1 Replacement cap (2")SED 351399-1 Deck plate key

Sea-Dog Stamped S/S Deck FillFemale threads to accept 1-1/2" pipe •thread ttingsFlange diameter is 3-1/4" •Use #8 FH fastener•

SED 351261 DieselSED 351264-1 Waste

Wren Stainless Steel Deck FillsThese llers have no threading thus eliminating galling from dirt, sand etc. They also have a key lock for security. 316 Stainless steel.

Bayonet twist action with ‘pop up’ cap•Double sealed with water drain•Flush tting into deck with no visible xing •when closed

WRE D11621 2" 2" Diesel WRE WS11621 2" 2" WasteWRE W11621 2" 2" Water

Sea-Dog Locking Stainless Steel Deck FillsInvestment cast 316 stainless steel •Includes 2 keys •1-1/2" hose •#10 FH fasteners•1-1/4" cap threads•

SED 351320L-1 GasSED 351321L-1 Diesel

248

EXTERIO

R H

AR

DW

AR

E

Deck Fills

Sea-Dog Cast Stainless Steel Deck Fills With Keyless CapsThese investment cast 316 stainless deck

lls have a special cap with a built in key for quick and easy removal. The hinged key can be locked in the upright position to open or close the ll and then recess into the cap for a ush surface. Caps are molded in special colours to prevent accidental, dangerous and costly tank contamination. For use with 1-1/2" I.D. hose.

Uses #10 FH fasteners•Part # Marking Cap

SED 351310-1 Gas Red

SED 351311-1 Diesel Green

SED 351312-1 Water Blue

SED 351313-1 Waste Black

Replacement Caps:SED 357090-1 Red gas cap onlySED 357091-1 Green diesel cap onlySED 357093-1 Blue water cap onlySED 357094-1 Black waste cap only

Buck Algonquin Pipe Deck PlatesFurnished with beaded chain, cap and spanner key. Cast bronze with machined brass nish. 1-1/2" and 2" sizes come complete with O-ring seal.

Uses #10 FH fasteners•Part # Finish Marked

BUC ORING-125 O-Ring ts all 125 deck plates

Pipe size 1-1/2". Flange diameter 3-3/4"

BUC PDP 150MF-PLN Machine Plain

BUC PDP 150MF-GAS Machine Gas

BUC PDP 150MF-FUEL Machine Fuel

BUC PDP 150MF-WTR Machine Water

BUC PDP 150MF-WSTE Machine Waste

BUC PDP 150MF-DIE Machine Diesel


Pipe size 2". Flange diameter 4-5/8"

BUC PDP 200MF-PLN Machine Plain

BUC PDP 200MF-GAS Machine Gas

BUC PDP 200MF-FUEL Machine Fuel

BUC PDP 200MF-WTR Machine Water

BUC PDP 200MF-WSTE Machine Waste

BUC PDP 200MF-DIE Machine Diesel


Note: Spare Caps OnlyBUC PDPC-125-MF 1-1/4" machineBUC PDPC-150-MF 1-1/2" machineBUC PDPC-200-MF 2" machine

Sea-Dog Keyless Cap Deck FillsThese breglass lled nylon deck

lls have a special cap with a built in key for quick and easy cap removal. The hinged key can be locked in the upright position to open or close the ll and then recessed into the cap for a ush surface. Caps are molded in special colours to prevent accidental, dangerous and costly tank contamination. For use with 1-1/2" I.D. hose.

Uses #10 FH fasteners•Part # Marking Cap Body

SED 357030-1 Gas Red Black

SED 357031-1 Diesel Green Black

SED 357033-1 Water Blue Black

SED 357034-1 Waste Black Black

SED 357020-1 Gas Red White

SED 357023-1 Water Blue White

SED 357024-1 Waste Black White

Replacement Caps:SED 357090-1 Red gas cap onlySED 357091-1 Green diesel cap onlySED 357093-1 Blue water cap onlySED 357094-1 Black waste cap only

Sea-Dog Fibreglass Nylon Deck Fills

For use with 1-1/2" I.D. hose•Flange diameter: 3-5/16"•Comes with safety chain•Use #10 fasteners•

Part # Marking Cap

SED 357000-1 N/A Body Only Black

SED 357010-1 Gas Red

SED 357011-1 Diesel Green

SED 357013-1 Water Blue

SED 357014-1 Waste Black

Replacement Caps:SED 357015-1 Cap & chain for gas unitSED 357016-1 Cap & chain for diesel unitSED 357017-1 Cap & chain for water unitSED 357018-1 Cap & chain for waste unit

EXTERIO

R H

AR

DW

AR

E249Deck Plates / Deck Plate Keys

Buck Algonquin Stainless Steel Pipe Deck Plates

Investment cast 316 stainless steel, polished to a mirror nish. Furnished with bead chain, cap and spanner key. With O-ring seal.Uses #10 FH fasteners

Part # Pipe Marked Flange

BUC PDPS 150-GAS 1-1/2" Gas 3-3/4"

BUC PDPS 150-WTR 1-1/2" Water 3-3/4"

BUC PDPS 150-DIE 1-1/2" Diesel 3-3/4"

BUC PDPS 150-PLN 1-1/2" Plain 3-3/4"

BUC PDPS 150-WSTE 1-1/2" Waste 3-3/4"

BUC PDPS 200-DIE 2" Diesel 4-5/8"

BUC PDPS 200-PLN 2" Plain 4-5/8"

BUC PDPS 200-GAS 2" Gas 4-5/8"

Note: Spare caps onlyBUC PDPS-150C-S/S 1-1/2" stainless steelBUC PDPS-200C-S/S 2" stainless steel

Perko Safety CordPrevents loss of deck plate caps. 24" mono lament.PER 537-DP

Attwood Stainless Steel Replacement CapWith threads for 1-1/4" straight pipe deck

lls. Fits Attwood #'s 66406, 66407, 66408 and 66408C1.ATT 66074-3 Replacement cap

and chain

Davis Deck Plate KeyThis handy, pocket size, deck plate key is made of hardened 301 marine grade stainless steel. Positive

t eliminates damage to plastic or metal deck plates. Fits hole spacing: 1.06"(27 mm), 1.19"(30 mm), and 1.44"(37mm). Fits slots: 1.125"(28 mm) and larger.DIN 381

Sea-Dog Deck Fill KeyMade from injection molded nylon. Distance between teeth 1-3/16".SED 357399-1 Black

Perko Deck Plate KeyFits Perko 1-1/4" and 1-1/2" deck plates and many other “slot” type opening deck plates. Rugged black plastic.PER 1247-DP-BLK

Perko Deck Plate Key

Part #Lug

Centres LengthPlateSize Finish

PER 1248-006-DP 5/8" 3-3/8" 1" Zinc

PER 1248-7-8-DP 1-1/8" 3-3/8" 1-1/2" Plastic

PER 1248-009-DP 1-11/16" 4-3/8" 2" Zinc

Sea-Dog Adjustable Deck Plate KeyOpens to a maximum of 6" and comes with two sizes of stainless steel pins, 3/16" and 5/16" allowing it to t most plates or caps. If desired, you can add a lanyard. Made from satin nished bronze.SED 335680-1

Sea-Dog Universal Deck Plate KeyStamped 304 stainless steel. Fits deck plates with holes or slots. Easily opens shackles, bottles and slotted fasteners.SED 335690-1

Sea-Dog Deck Plate KeyMade from formed 304 stainless, 7" overall. Fits all cast stainless steel Sea-Dog deck ll caps: 351320 - 351331 and 351350 - 351353 and deck plates: 335633 - 335646. Plus ts other brands of deck plates and deck lls. SED 335699-1 CardedSED 335699 Bulk

Perko Deck Plate KeyChrome plated zinc. Heavy duty - will

t up to 8" diameter plates.Overall length 8-1/2"•

PER 826-DP-CHR

EXTERIO

R H

AR

DW

AR

E251Rail Fittings

Sea-Dog 7/8" Base Rail Fittings (Chrome Plated Die Cast Zinc)

Part # Description Tube OD Base Fastener

SED 286030-1 30° Round base 7/8” 2-5/8" #10 FH

SED 286060-1 60° Round base 7/8” 2-5/8" #10 FH

SED 286090-1 90° Round base 7/8” 2-5/8" #10 FH

SED 286130-1 30° Rectangular base 7/8” 1-5/8" x 2-3/4" #10 FH



Includes 1/4-28 x 3/16” set screws

286030

286060

286090

286130

286190286160

Sea-Dog 7/8" Hand Rail Fittings (Chrome Plated Die Cast Zinc)

Part # Description Tube OD Rail Height Fastener

SED 286560-1 60° Center 7/8” 2-1/8" #10 FH

SED 286565-1 60° End-left hand 7/8” 2-1/8" #10 FH

SED 286566-1 60° End-right hand 7/8” 2-1/8 #10 FH

SED 286955-1 5-1/2” Blend base 7/8” - #10 FH

SED 286290-1 Bullet end 7/8” - #10 FH


286560 286565 286566

286955286290

Sea-Dog Round Base Rail Fittings (Investment Cast 316 Stainless Steel)

Part # Description Tube OD Base OD Fastener

SED 280300-1 30° Round base 7/8” 2-5/8" #10 FH

SED 280301-1 30° Round base 1” 2-3/4" 1/4“ FH

SED 280450-1 45° Round base 7/8” 2-5/8" #10 FH

SED 280451-1 45° Round base 1” 2-3/4" 1/4“ FH

SED 280600 60° Round base 7/8” 2-5/8" #10 FH

SED 280600-1 60° Round base 7/8” 2-5/8" #10 FH

SED 280601-1 60° Round base 1” 2-3/4" 1/4“ FH

SED 280900-1 90° Round base 7/8” 2-5/8" #10 FH

SED 280901-1 90° Round base 1” 2-3/4" 1/4“ FH


280300 280450

280900280600

Sea-Dog 7/8" Rail Tee Fittings (Chrome Plated Die Cast Zinc)

Part # Description Tube OD

SED 296090-1 90° Tee 7/8”

SED 296095-1 90° Elbow 7/8”

SED 296160-1 60° Tee-left hand 7/8”

SED 296260-1 60° Tee-right hand 7/8”

SED 296510-1 110° Bow form 7/8”


296090

296095296510

296260296160

252

EXTERIO

R H

AR

DW

AR

E

Rail Fittings

Sea-Dog Stanchion Fittings (Investment Cast 316 Stainless Steel)

Part # Description Tube OD Eye Dia.

SED 270500-1 Stanchion eye 1” 1/2”

SED 270510-1 Stanchion cap 7/8” 5/16”

SED 270511-1 Stanchion cap 1” 5/16”

Includes 1/4-28 x 3/16” set screws 270500 270510

Sea-Dog Hand Rail Fittings (Investment Cast 316 Stainless Steel)


SED 285060-1 60° Center 7/8” 1-13/16” #10 FH

SED 285061-1 60° Center 1” 2-3/16” 1/4“ FH

SED 285065-1 60° End left-hand 7/8" 1-13/16" #10 FH

SED 285120-1 120° End 7/8” 1-13/16” #10 FH

SED 285121-1 120° End 1” 2-3/16” 1/4“ FH

SED 285160 60° End 7/8” 1-13/16” #10 FH

SED 285160-1 60° End 7/8” 1-13/16” #10 FH

SED 285161-1 60° End 1” 2-3/16” 1/4“ FH

SED 285165-1 60° End left-hand 7/8” 1-13/16” #10 FH

SED 285166-1 60° End right-hand 7/8” 1-13/16” #10 FH

SED 288290-1 Bullet end 7/8” N/A N/A

SED 289900-1 90° End-bottom mounted 7/8” 1-7/8” 1/4“ Bolt

SED 289901-1 90° End-bottom mounted 1” 2” 1/4“ Bolt

SED 289905-1 60° Center-bottom mounted 7/8” 1-7/8” 1/4“ Bolt


285060

285120

289905

289900

285160

288290

Sea-Dog Rectangular Base Rail Fittings (Investment Cast 316 Stainless Steel)

Part # Description Tube OD Base Fastener

SED 281300-1 30° Rectangular base 7/8” 1-3/4” x 2-5/8” #10 FH

SED 281301-1 30° Rectangular base 1” 1-7/8” x 3-3/16” 1/4" FH

SED 281450-1 45° Rectangular base 7/8” 1-11/16” x 3” #10 FH


SED 281600-1 60° Rectangular base 7/8” 1-3/4” x 3-1/16” #10 FH


SED 281900 90° Rectangular base 7/8” 1-11/16” x 3” #10 FH

SED 281900-1 90° Rectangular base 7/8” 1-11/16” x 3” #10 FH


SED 281931-1 90° Base 1” 2-1/16” x 3” 1/4" FH

SED 281936-1 90° Base 1” 3-11/16” x 3-3/8” 1/4" FH


281300 281450

281600 281900

281936

Suf x (-1) indicates display package.

EXTERIO

R H

AR

DW

AR

E253Rail Fittings

Sea-Dog Rail Tee Fittings (Investment Cast 316 Stainless Steel)

Part # Description Tube OD

SED 290600-1 60° Universal tee 7/8”

SED 290601-1 60° Universal tee 1”

SED 290900-1 90° Tee 7/8”

SED 290901-1 90° Tee 1”

SED 291600-1 60° Tee left-hand 7/8”

SED 291601-1 60° Tee left-hand 1”

SED 292600-1 60° Tee right-hand 7/8”

SED 292601-1 60° Tee right-hand 1”

SED 293100-1 3-Way corner 7/8”

SED 293101-1 3-Way corner 1”

SED 293131-1 4-Way corner 1”


290600 290900

293131293100

Sea-Dog Elbow Fittings (Investment Cast 316 Stainless Steel)

Part # Description Tube OD Degree

SED 293190-1 90° Cable anchor 7/8” N/A

SED 293191-1 90° Cable anchor 1” N/A

SED 295090-1 90° Elbow 7/8” N/A

SED 295091-1 90° Elbow 1” N/A

SED 295095-1 Elbow & anchor eye 7/8” N/A

SED 295096-1 Elbow & anchor eye 1” N/A

SED 295110-1 Bow form 7/8” 110°

SED 295111-1 Bow form 1” 110°

SED 295125-1 Bow form 7/8” 125°


293190

295090

295110

Sea-Dog Handrail/Lifeline Fittings (Investment Cast 316 Stainless Steel)

Part # Description Tube OD Base Pin Dia. Fastener

SED 270530-1 Stanchion sleeve w/ eye 7/8” N/A 3/8” N/A

SED 270531-1 Stanchion sleeve w/ eye 1” N/A 3/8” N/A

SED 270540-1 4° Rectangular base 1” 2-13/16” x 3-9/16” N/A 1/4" FH

SED 270550-1 Lifeline base N/A 2-7/16” x 1-1/2” 3/8” #10 FH


270540

270550

270530

Sea-Dog Stanchions & End Fittings (Investment Cast 316 Stainless Steel)


SED 289155-1 5-1/2° Rail (end in) N/A 7/8” #10 FH

SED 289165-1 16-1/2° Rail (end out) N/A 7/8” #10 FH

Includes 1/4-28 x 3/16” set screws 289155

254

EXTERIO

R H

AR

DW

AR

E

Rail Fittings / Tubing / Hand Rails

Stainless Steel Rail Tubing600 grit buffed and polished nish•Standard length 20 feet•Type 304 S/S•Available in two sizes •Sold by the foot•

WES 7/8"S/S 7/8" OD x .049 wall thicknessWES 1"S/S 1" OD x .065 wall thickness

TACO Aluminum Tubing

Bright anodized nish, .058" wall.TAC A233458BLY20 3/4" OD, 20' lengthTAC A237858BLY12 7/8" OD, 12' length

AFI Stainless Steel HandrailsQuality pre-made stainless steel handrails make a great addition to any boat. They provide an extra margin of safety and convenience.

Using 1/4"fasteners•Display packaged•

AFI 74212 12"AFI 74218 18"AFI 74224 24"

Attwood Flexible Grab HandlesConstructed of soft black polypropylene webbing over a semi rigid core. U.V. stable and mildew resistant.

7-1/2' grip opening •Uses 4 x #12 screws•

ATT 2061-5Sea-Dog Stainless Hinged Rail Tee FittingsHinged feature allows installation without disassembling existing Bimini setup. Also reduces possibility of scratching tubing during installation since it does not need to slide into place.SED 290603-1 60° Hinged universal tee 7/8"SED 290604-1 60° Hinged universal tee 1"SED 290903-1 90° Hinged tee 7/8"SED 290904-1 90° Hinged tee 1"

Perko Grab Rail PostsChrome plated bronze. For 1" O.D. tubing.

Height: 3-3/8"•Base diameter: 2-1/2"•Uses #8 FH fasteners•

PER 380-000-CHR End postPER 380-A00-CHR Centre post

Sea-DogRail Mount Hose and Cable BracketThis stainless steel bracket is designed to hold water hoses, shore power cords, phone lines, etc. The stainless steel retaining clip also prevents dock lines and rigging from accidentally getting caught in the bracket.

2" W x 5-3/4" H x 1-1/8" D•SED 327115-1

Sea-Dog Rail Mount Brackets

Injection molded nylon and stainless steel. Designed to clamp easily to 7/8" - 1" tubing. Fasteners are included.SED 327100-1 1 pr. brackets SED 327101-1 1 pr. brackets, and 2 oval platesSED 327102-1 1 pr. brackets, and 2 square plates

Transat Stainless Rail Fitting Rectangle Base - Bulk

TMS Q30035 90° 7/8”TMS Q30036 90° 1”TMS Q30053 60° 7/8”TMS Q30054 60° 1”

Transat Stainless Rail Fitting Round Base - Bulk

TMS Q30038 90° 7/8”TMS Q30039 90° 1”TMS Q30047 60° 7/8”TMS Q30048 60° 1”

Transat Stainless Stanchion Cap - Bulk

TMS Q30022 7/8”TMS Q30023 1”

Transat Stainless 3-Way Corner Fitting - Bulk

TMS Q30020 7/8”TMS Q30021 1”

Transat Stainless Stanchion Eye - BulkTMS Q30017 7/8” w/ eye TMS Q30018 1” w/ eye

Transat Stainless 60° Rail Tees - Bulk

TMS Q30057 60° 7/8”TMS Q30058 60° 1”

Transat Stainless 90° Elbows - Bulk

TMS Q30063 7/8”TMS Q30064 1”

Transat Stainless 90° Rail Tees - Bulk

TMS Q30059 7/8”TMS Q30060 1”

EXTERIO

R H

AR

DW

AR

E255Hand Rails / Boat Top Fittings

Sea-Dog Bimini StrapNylon/stainless/chrome plated brass.

1" x 8', black•SED 298172-1 Pair

TACO Slide Track14 foot lengths •

TAC A520037BLY14

Star brite Clear Plastic Window SaverSimple and easy to install•Stops sun heated rails from burning plastic •windows

STA 88578 7/8" STA 88510 1"

Sea-Dog Injection Molded Rail Top Fittings

Part # Description Colour Tube OD Pin Qty

SED 273100-1 Top cap Black 7/8” 1/4" Pair

SED 273101-1 Top cap White 7/8” 1/4" Pair

SED 273110-1 Top cap Black 3/4” 1/4" Pair

SED 273111-1 Top cap White 3/4” 1/4" Pair

SED 273160-1 Jaw slide Black 7/8” 3/16" Pair

SED 273161-1 Jaw slide White 7/8” 3/16" Pair

SED 273162-1 Hinged top slide Black 7/8” 1/4" Each

SED 273165-1 Jaw slide Black 3/4" 3/16" Pair

SED 273166-1 Jaw slide White 3/4" 3/16" Pair

SED 273175-1 Top insert Black 3/4" 1/4" Pair

SED 273176-1 Top insert White 3/4" 1/4" Pair

SED 273180-1 Top insert Black 7/8" 1/4" Pair

SED 273181-1 Top insert White 7/8" 1/4" Pair

273100

273110273160

273162273180273175

Sea-Dog Hand RailsStud mount•3/4" OD tube•Rail height: 2"•Investment cast 316 stainless steel•

SED 254112-1 12”SED 254118-1 18”SED 254124-1 24”

Sea-Dog Top Slide KitsTop Slide Kits - .85 TrackEnables easy storage of bimini tops. Each kit includes 2 x Tracks, 1 x starboard side deck hinge slide, 1 x port side deck hinge slide and 4 x end cap covers.SED 298318-1 18" - BlackSED 298418-1 18" - WhiteSED 298336-1 36" - BlackSED 298436-1 36" - White

Head screw.SED 273568 Pair

Injection molded black nylon slide bracket.SED 273665-1 Pair

Sea-Dog Canvas Top Fittings

Injection molded black nylon bracket mount jaw slide.SED 273565-1 Pair

Sea-Dog Injection Molded Track Fittings

Part # Description Colour Width Length Qty Fastener

SED 273213-1 .85 Track end cap stop Black 7/8” 1-1/4" Pair #8 FH

SED 273220-1 .85 Track slides Black 11/16” 2-3/8" Pair -

273220273213

256

EXTERIO

R H

AR

DW

AR

E

Boat Top Fittings

Sea-Dog Injection Molded Head Screws & ConnectorsSold in pairs•

Part # Description Colour Width Length

SED 273298-1 Head screw 1/4-20 x 7/8” Black 7/8” 1-3/8”

SED 273299-1 Head screw 1/4-20 x 7/8” White 7/8” 1-3/8”

SED 273308-1 Head screw 1/4-20 x 1/2” Black 13/16” 15/16”

SED 273309-1 Head screw 1/4-20 x 1/2” White 13/16” 15/16”

SED 273301 Tube connector 7/8” White 7/8” 2-1/4”


Sea-Dog Injection Molded Hinge FittingsSold in pairs•Uses #10 FH fasteners•


SED 273250-1 Deck hinge Black 7/8” 2-7/16"

SED 273251-1 Deck hinge White 7/8” 2-7/16"

SED 273260-1 .85 Slide mount Black 7/8” 2-1/4”

SED 273261-1 .85 Slide mount White 7/8” 2-1/4”

SED 273265-1 1.050 Slide mount Black 1” 2-1/4”

SED 273266-1 1.050 Slide mount White 1” 2-1/4”

SED 273295-1 .85 Track slide lock Black 11/16” 13/16”

1/4" Pin

273251

273295

273261

273265

Sea-Dog Injection Molded Hinge Fittings, 3/16" PinSold in pairs•


SED 273200-1 Large deck hinge Black 13/16” 2-7/16"

SED 273201-1 Large deck hinge White 13/16” 2-7/16"

SED 273205-1 Small deck hinge Black 13/16” 2-3/8”

SED 273206-1 Small deck hinge White 13/16” 2-3/8”

SED 273230-1 Large deck hinge/angled Black 7/8” 2-7/16"

SED 273231-1 Large deck hinge/angled White 7/8” 2-7/16"

SED 273240-1 Concave deck hinge Black 13/16” 2-7/16"

SED 273286-1 Deck hinge slide Stbd & Prt White 7/8" 2-7/16"

Use #10 FH screws

273200

273240

273205

273230

273286

Sea-Dog Injection Molded Canvas Top FittingsSold in pairs•

Part # Description Colour Tube OD* Hole Space Fastener

SED 273350-1 90° Inside eye end Black 3/4” - -

SED 273351-1 90° Inside eye end White 3/4" - -

SED 273369-1 90° Inside eye bracket Black N/A 15/16" #8 FH

SED 273370-1 90° Inside eye bracket White N/A 15/16” #8 FH

273351

273369

EXTERIO

R H

AR

DW

AR

E257Boat Top Fittings

Sea-Dog Investment Cast 316 Stainless Steel Top FittingsSold by the each•

SED 299999-1 1/4-28 x 3/16" set screws (Set of 10)

Part # Description Tube OD Pin

SED 270100 Top cap 7/8" 1/4"

SED 270100-1 Top cap 7/8" 1/4"

SED 270101-1 Top cap 1” 1/4”

SED 270102 Top cap 1-1/4” 1/4”

SED 270111-1 Top cap heavy duty 1” 5/16”

SED 270160-1 Top slide with bolt 7/8” 1/4”

SED 270161-1 Top slide with bolt 1” 1/4”

SED 270162 Top slide with bolt 1-1/4” 1/4”

SED 270165-1 Top slide with bolt 3/4" 1/4”

SED 270166-1 Hinged top slide with bolt 7/8” 1/4”

SED 270175-1 Top insert 3/4" 1/4”

SED 270180-1 Top insert 7/8” 1/4”



270100

270101

270111

270160

270162

270175

Sea-Dog Investment Cast 316 Stainless Steel Hinge FittingsSold by the each•

Parts:SED OP27002-1 S/S replacement hinge pinSED 299980-1 Lanyard with stepped release pinSED 299981-1 Lanyard with straight release pinSED 299999-1 1/4-28 x 3/16" set screws (Set of 10)

Part # Description Base Pin Fastener

SED 270200 90° Deck hinge 3/4" x 2-1/4” 1/4” #10 FH

SED 270200-1 90° Deck hinge 3/4" x 2-1/4” 1/4” #10 FH

SED 270205-1 90° Deck hinge - heavy duty 1” x 2-1/16” 5/16” 1/4" FH

SED 270210-1 90° Deck hinge - removable pin 3/4" x 2-1/4” 1/4” #10 FH

SED 270230-1 Angle back deck hinge 3/4" x 2-1/4” 1/4” #10 FH

SED 270240-1 Concave base deck hinge 3/4" x 2-1/4” 1/4” #10 FH

SED 270245-1 Concave base deck hinge - removable pin 3/4" x 2-1/4” 1/4” #10 FH

SED 270250-1 Side mount deck hinge 7/8” x 2” 1/4” #10 FH

SED 270255-1 Side mount deck hinge - heavy duty 1-7/8” x 2-13/16” 5/16” 1/4" FH

SED 270260-1 Adjustable angle deck hinge - heavy duty 1” x 2-3/4” N/A #10 FH


270200270205 270210 270230 270240 270245

270250

270260

270255

258

EXTERIO

R H

AR

DW

AR

E

Ladders

Garelick Fold-Down LadderFolds down into water for easy boarding. Mounts on 6-1/2" x 12" area. Unique attaching brackets enable ladder to t most angled or curved transoms. Improved self-locking, folding hinge. Tube rail can be cut and moved for proper t. Featuring durable 1" diameter aluminum tubing. All aluminum parts are anodized. Non-slip comfortable modi ed oval-shaped anodized aluminum steps. Strap locks ladder in up position. All fasteners are stainless steel. GAR 18017 2-Step, 15" fold-downGAR 18018 3-Step, 25" fold-down

Sea-Dog Telescoping LaddersStainless steel construction•Gudgeon mount•Comes with securing strap •Width: 8-3/4"•

SED 328202 2 Step, 23-3/8"SED 328203 3 Step, 34-3/8"

AFI Swim Platform BracketsStainless steel. Sold individually.AFI 60995 9"H x 17"L x 1-1/2"WAFI 60996 14"H x 21-1/2"L x 1-1/2"W

AFI Poly Platform With Telescoping LadderAll stainless steel telescoping •two-step ladderWhite poly swim platform for boats •with O/B motorsPlatform kits are easy to assemble •using pre-marked and pre-drilled holesMolded platform manufactured •of UV resistant, high-strength polypropyleneAnti-skid ribs and textured surface molded onto platform•All tubing, brackets and hardware are stainless steel•Telescoping ladder easily stores on top of platform•Platform: 18" W (back), 17" W (front), x 15" D x ¾" thick•

AFI 67904 Windline Underdeck Ladders

These underdeck ladders come complete with bracket mounts and quick lock straps. Electro-polished stainless steel with plastic treads. Slides under platform for compact storage.

Part # Style Open Stowed

WIN UP-2X 2 step 26" 17"

WIN UP-3X 3 step 37" 18"

Windline Telescoping Drop Ladder

Mounts and stows on top of •the swim platform. 3 stainless steel steps with a comfortable plastic pads. Thick-wall stainless tubing. Telescoping steps drop quickly and easily into the water. Length stowed: 14.5"•Length deployed: 34"•Width: 12.5"•

WIN TDL-3X

Windline Under Platform Telescoping Slide Mount LadderStainless steel steps slide under the platform for stowage. Requires a minimal amount of depth, fore and aft. Includes quick lock nylon strap.

Three step•Length deployed: 35.0"•Length stowed: 15.0"•Height stowed: 2.5"•Overall width: 12.5"•

WIN SM-3X

Garelick Swim Platform/LadderFor use on outboard transoms•One stainless wrap around rail and one •undersideDurable, platform is easy to clean•Stainless steel hardware•13" L x 14-1/2" W x 12.5" D•

GAR 19535

For use on outboard transoms•One stainless wrap around rail and one •support railDurable, platform is easy to clean•Ladder slides up and under platform for •storageStainless steel hardware•18" W x 15-1/2" D x 22-3/4" L•

GAR 19536

For use on inboard/outboard transoms•Two stainless wrap around rails (no lower •leg)Durable, platform is easy to clean•Stainless steel hardware•13" L x 14-1/2" W x 12-1/2" H•

GAR 19545

EXTERIO

R H

AR

DW

AR

E259Ladders

Windline Removable Pontoon LadderIntegrated 11" swim handles, plastic steps for comfort and it folds for compact storage. Four steps.

Length deployed: 46.5"•Length stowed: 28.0"•Height stowed:5.0"•Overall width: 16" •

WIN TDL-4E

Garelick Deluxe Series LaddersFeature comfortable and sturdy white traction molded steps. Durable 1" diameter aluminum tubing. Thick vinyl covered hooks will not mark hull's nish. All aluminum adjustable standoffs with cushioned tips for correct t. Hooks and standoffs fold at for compact storage. Recommended for persons up to 175 pounds.

Part # Steps H x W Hook

GAR 05031 3 36" x 15" 11"

GAR 05037 3 36" x 15" 7"

GAR 05041 4 48" x 15" 11"

Garelick Latch Type LadderDesigned for small cruisers, Run-a-bouts or sail boats, with unusual gunwales where a hook type ladder is not practical. Attaches easily with 1 pair of Model 76000 Shur-Loc catches provided. Durable 1" diameter aluminum tubing with comfortable and sturdy white traction molded plastic steps. All aluminum adjustable standoffs with cushioned tips for correct t.

Length: 56" (including 13" over rail hook)•GAR 10049

Garelick Shur-Loc Ladder CatchesDesigned to mount on hull or deck for attaching Garelick boarding ladders. Allows for either permanent or temporary mounting. Made of sturdy stainless steel with unique self locking design.

2-1/2" x 1-3/4"•GAR 76000

Garelick In atable Boat LadderContour design hugs hull for side boarding and attaches to oor board with a 3/8" line and swivel snap. Vinyl sleeves will not mar hull material.

33" x 13.5"•GAR 13003 3-step ladder

Sea-Dog Emergency Folding LaddersThese Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 pounds. Steps are spaced at 1' 6" and are 11-3/4" wide.SED 582502-1 4-steps, 2'5" longSED 582503-1 3-steps, 1'6" long

Davis Instruments Swim StirrupThe Swim Stirrup® has been carefully engineered to provide safe, easy access to small boats for swimmers or water skiers. Durable, reliable design attaches to gunwales, transoms, or open bows. Easy to install, easy to use and it oats.

Perfect for rowboats, ski boats, •dinghies, sail boats Adjustable length to t your boat •Complete hardware and instructions included •

DIN 1466

► Also See: Dock Ladders pg 856

Garelick Ladder StandoffsBoarding ladder standoffs, as used on traction molded plastic and traction grooved oak style steps. Includes poly tips, screws and nuts. Can be cut for exact length desired. Sold in pairs.

Length: 4-1/2"•GAR 99000 Standoffs

Whitecap Boarding Ladder

Made of 304 stainless steel •Push button lock feature:•

Separates handle for storageAllows for 2 boarding positions

Tube diameter 1-1/2"•Overall height 45-1/2" •Handle width: 12"•Fits any standard rod holder•

WHI S-6242

260

EXTERIO

R H

AR

DW

AR

E

Ladders

Garelick Sport/Diver LaddersAngled design for stair-like ease of boarding•Centre vertical allows easy use with diving gear•Oval steps with nonskid surface•Quick release mounting bracket with lock for •easy storageHeavy duty - rated to 400 lbs. boarding weight•Transom mounting bracket and ladder storage •brackets included

GAR 19803 3 steps x 13", 38" lengthGAR 19804 4 steps x 13", 48" length

Garelick Folding Gull Wing Step Ladders

Black reinforced nylon steps fold "parallel" in •unison and lock upQuick release mounting bracket with built-•in angle adjustment and breakaway feature includedCentre vertical allows easy use with diving •gearDual stainless steel centre rails •Heavy duty- rated to 400 lbs boarding weight•

Part # Description Stowed Open

GAR 19853 3 steps 4" x 4" x 47" 44" x 15"

GAR 19854 4 steps 4" x 4" x 57" 57" x 15"

Folded

Garelick Sport/Diver Ladder Mounting BracketUse this additional bracket for multiple mounting locations on boat. Mounted on 1" thick poly spacer with 100 angle and lock and stainless steel face plate mounting bracket.

2.75" W x 3.62" H •Mounting hole diameter: 5/16"•

GAR 99180

Garelick Sport/Diver Ladder MountsGarelick transom mounting extrusion shim. Extends ladder further from the transom. Used with face plate and 10 degree poly spacer included with ladder. Made of stainless steel.

2.75" W x 3.62" H•GAR 99181 2"GAR 99184 3"

Great for any dog you want to take out in the water. It provides an easy entrance/exit.

Portable, lightweight and durable •Easy to attach and remove from any boat ladder •Reduces pain and strain for pets and owners •Measures 16" x 64" and folds in half for easy storage•

PAW 5200

Paws Aboard Boarding Ladder

When stowed this ladder ts fully within the transom of the boat. The only component visible during storage is the faceplate and locking/release mechanism. Pull the release pin, slide the ladder out of the storage tube and fold out the molded steps. Semi-automatic function with all steps folding out on common side at once. All aluminum construction with plastic steps.GAR 19902-34 3-StepGAR 19902-44 4-Step

StowedStep

Garelick Integrated Transom Ladders

EXTERIO

R H

AR

DW

AR

E261Steps

Sea-Dog Folding Step

Chrome plated cast brass. SED 322620-1

Sea-Dog Deck Steps

Part # A B C Fastener

SED 328012-1 2-1/4" 8-3/8" 7-11/16" #8 FH

SED 328017-1 Replacement pad for 328012

SED 328013-1 3-3/8" 8-7/8" 8-3/16" #8 FH

Perko Step PlatesChrome plated zinc frame•Black molded soft plastic pad •Uses #8 FH fasteners•

PER 1325-DP1-CHR 8-3/4" x 3-1/4", 2/pkg

Chrome plated bronze frames•Black molded plastic pads •

PER 1043-DP1-CHR 8-3/4" x 3-1/4", eachPER 1043-DP2-CHR 11-1/2" x 5-3/4", each

Spare pads:PER 1050-DP1-BLK For 1325-1/1043-1, 2/pkgPER 1050-DP2-BLK For 1043-2, 2/pkg

Perko Step PlateChrome plated brass frame with soft black plastic tread insert. 2/pkg

7-1/4" x 1-1/2" •Uses #8 FH fasteners•

PER 1015-DP-CHR

Buck Algonquin Flying Bridge Ladder StepsMade from anodized high tensile aluminum. 11.5o ladder angle.

Step size: 3" x 17"•BUC ST170088 7/8" tube O.D.BUC ST1700100 1" tube O.D.

Perko Folding StepCast bronze, chrome plated construction. Stainless steel spring holds step in open or closed position.

Step size: 4-1/8" x 2-1/4"•Base size: 4-1/4" x 1-3/4"•Folded projection 1-3/8"•Uses 5/16" RH fasteners•

PER 344-DP-CHR

Sea-Dog Aluminum Folding Mast Step

Made from polished #356 T-6 aluminum and nished with clear anodizing. This step sticks out only 1-1/2" from the mast when not in use.

Step has 5" tread width •Uses 1/4" fasteners•

SED 328030-1

Perko Boarding StepCast bronze chrome plated.

Step size: 6" x 4-1/4"•Mount bracket size: 6" x 2"•Uses 5/16" RH fasteners•

PER 351-DP-CHR

Injection molded nylon, these step handles can be used as a lift on small boat transoms and since they are molded with a contoured handle grip, the at, textured upper surface also allows it to be used as a step.

Use #10 RH fasteners•SED 227260-1 BlackSED 227261-1 White

Sea-Dog Step Handles

Sea-Dog Folding Step

304 stainless steel. Unique design locks steps in a rattle-free upright position when not in use. In the down position, the 4-1/4" long step provides secure footing when working on the mast. Use #10 PH.SED 328025-1

262

EXTERIO

R H

AR

DW

AR

E

Non-Slip

LifeSafe Traction StripsTextured vinyl helps reduce the risk of slipping. For safer footing everywhere… steps, ladders, ramps, basement stairs, boats, trucks, trailers, farm equipment, decks, skateboards, pools,docks, diving boards and campers.

Part # Size Colour Qty

LIF RE3902WH 1" x 12" White 10

LIF RE3923GR 2" x 12" Gray 6

LIF RE3924WH 2" x 12" White 6

LifeSafe Anti-Slip Grit StripsDurable in wet or dry conditions. Pre-cut, self-adhesive strips are easy to use, simply peel and stick. Improves footing on frames during cleaning, maintenance and boat launching.

6 per pack•LIF RE3892BL 2" x 12" Black

LifeSafe Traction TapeTextured vinyl helps reduce the risk of slipping. LIF RE3954 2" x 15' GreyLIF RE3955 2" x 15' White

LifeSafe Anti-Slip Grit TapesDurable in wet or dry conditions. Self-adhesive rolls are easy to use, simply cut, peel and stick. Improves footing on frames during cleaning, maintenance and boat launching. Black in colour.LIF RE36028 1" x 15'LIF RE36029 2" x 15'

LifeSafe Traction Tape DisplayMetal counter top display facilitates the selling of product by the foot. Comes complete with the following anti-slip product in white:1 Roll - 1” x 60 ft1 Roll - 2” x 60 ft1 Roll - 4” x 60 ftLIF MR3960 Display

3M Safety-WalkLight DutyFine textured, clear or white safety walk is recommended for use on boat decks, around pools, tubs and showers. Helps to coordinate a light nonskid surface with any colour substrate.

Length per roll: 60'•THR 59502-7743 1" WhiteTHR 59503-7744 2" WhiteTHR 59500-7745 4" White

THR 59498-7751 1" ClearTHR 59499-7752 2" ClearTHR 59496-7753 4" Clear

Heavy DutySurfacing has a diamond hard mineral surface for extra traction. It is designed for use around areas of heavy traf c.

Black in colour •Length per roll: 60'•

THR 59514-7731 1" x 60 ftTHR 59515-7732 2" x 60 ftTHR 59512-7733 4" x 60 ft

General PurposeSafety-Walk consists of aluminum oxide abrasive particles bonded by a tough, durable polymer to a dimensionally stable plastic lm. Backing is coated with a pressure sensitive adhesive covered by a removable protective liner.

Length per roll: 60'•THR 19224 6" - Black

Medium GradeSimilar to the above product but made from a high friction medium grade resilient, slip resistant surface.

Length per roll: 60'•THR 19296 4" - BlackTHR 19297 6" - BlackTHR 19321 1" - GreyTHR 59507-7740 2" - GreyTHR 59504-7741 4" - GreyTHR 19324 6" - Grey

EXTERIO

R H

AR

DW

AR

E263Flags / Flag Holders

Paws Aboard FlagsAttention-grabbing boat ags include the Dog Paw and Dog Bone ags.

19" x 11" •PAW 4100 Paw print agPAW 4200 Bone ag

Taylor Made Boating FlagsSewn nylon ags with brass grommets are 12” x 18”.TAY 240 Jolly Roger pennantTAY 1818 Jolly Roger agTAY 3718 Fishing agTAY 9118 Cocktail agTAY 9218 Beer agTAY 9818 Margarita Time ag

Scythes FlagsCanadian made and screen printed on standard weight nylon. Individually packaged in heat sealed polyethylene bags.

SCY USA-18x9"SCY USA-24x12"SCY USA-36x18"SCY USA-54x27"SCY USA-72x36"

SCY BC-18x9"SCY BC-24x12"SCY BC-36x18"SCY BC-54x27"SCY BC-72x36"

SCY CDN-18x9"SCY CDN-24x12"SCY CDN-30x15"SCY CDN-36x18"SCY CDN-54x27"SCY CDN-72x36"SCY CDN-90x45"

Scythes Ingle eld ClipsAll zinc die-cast clips sold as sets.SCY 16-411004

Du-Bro Flag ClipsMade of stainless steel and spring loaded to hold on securely at speeds up to 65 mph.DUB 1500 Flag clips 2/pkgDUB 1501 Antenna ag clips 2/pkgDUB 1502 E/Z on ag clips 2/pkg

Taylor Made Charlevoix Flag ClipsThis simple one piece clip attaches semi-permanently to your pole and will keep your

ag securely in place at speeds up to 50 miles per hour. Flags can be attached or removed in seconds. The clips can also be removed, if desired.TAY 57926 3/4" PoleTAY 57928 7/8" to 1" Poles

ITT Skipper ClipsStainless steel utility fasteners•Set of 4•

ITT 34560-0000

Whitecap Wood FlagpoleIncludes (2) brass screws •Varnished mahogany•L: 18" x Dia: 3/4" •

WHI S-5006

Whitecap S/S FlagstaffRail mount agstaff •304 S/S staff and black nylon •bracket Diameter 1/2" x Length 17" •Bracket 7/8" and 1" tube•

WHI S-5010

Whitecap S/S FlagstaffClamp-on agstaff pole •Pole: 304 S/S •Clamp 316 S/S •Diameter 1/2" x Length 17" •Clamp tube 7/8" •

WHI S-5011

Perko Flag StaffsAnodized aluminum tube and chrome plated zinc base. Complete with o-ring seal. 3/4" base will t Perko 1218, 1265 bow lights and 1302 ag pole socket.

Part # Length Base Dia

PER 495-DP1-CHR 14" 1/2"

PER 495-DP2-CHR 14" 3/4"

PER 495-DP3-CHR 18" 3/4"

264

EXTERIO

R H

AR

DW

AR

E

Flag Holders

Perko Flag Pole Sockets

Upright style socket•Chrome plated bronze•Uses #8 F.H. or O.H. screws•

Part # lnside Dia Dia Flange

PER 220-DP1-CHR 3/4" 2-1/8"

PER 220-DP2-CHR 1" 2-1/2"

PER 220-DP3-CHR 1-1/4" 2-3/4"

Perko Flag Pole SocketClamp on socket is designed for mounting on a 3/4"- 1" railing. Chrome plated zinc with a black plastic knob.

Socket inside diameter: 3/4"•PER 1302-DP-CHR

Taylor Made S/S Flag PolesThis deluxe ag pole set features highly polished stainless steel from top to bottom. The staff is made from 1" 304 stainless steel. The nial and base are cast 304 stainless steel. The unique

ag clips are cast from 304 stainless steel which holds your ag taut so your ag is never tangled.TAY 902 18"TAY 903 24"TAY 904 30"TAY 905 36"TAY 907 48"

Taylor Made Rail Mount Flag SocketsDesigned to securely fasten to either 7/8”- 1” or 1-1/8” - 1-1/4” rails, these stainless steel mounts will look great and provide years of service. Both models are perpendicular to the rail and are made for 1” diameter ag poles.TAY 973 7/8" to 1" railsTAY 974 1-1/8" to 1-1/4" rails

Sea-Dog Flag Pole Sockets

Angled design stern socket in chrome plated sand cast brass.

Part # A B C Fastener

SED 492211-1 3/4" 2" 1-3/4" #6 FH

SED 492212-1 1" 2-1/2" 2" #6 FH

SED 492213-1 1-1/4" 2-3/4" 2-1/8" #6 FH

Sea-Dog Flush Mount Flag Pole Socket

Investment cast 316 S/S•Use #12 F.H. screws•

SED 491713-1

Perko Flag Pole SocketsFlush mount design in chrome plated bronze. Available in 2 styles and 3 sizes. Use #8 F.H. or O.H. screws.

Part #lnsideDia.

FlangeDia.

PER 218-DP1-CHR 3/4" 2"

PER 219-DP1-CHR 3/4" 2"

PER 218-DP2-CHR 1" 2-3/8"

PER 219-DP2-CHR 1" 2-3/8"

PER 218-DP3-CHR 1-1/4" 2-5/8"

PER 219-DP3-CHR 1-1/4" 2-5/8"

218

219

Sea-Dog Rail Mount FlagpoleMade from 304 S/S and injection moulded nylon.

Length: 15-1/2" •SED 327120-1

Sea-Dog Adjustable Rail Mount FlagpolesMade from 304 S/S, injection moulded nylon and polypropylene. Attach to 7/8" or 1" tubing.SED 327122-1 17"SED 327124-1 30"

Sea-Dog Bow Form FlagpoleFits bow forms with 1/2" diameter ag pole mounting holes. Comes with split rings for easy ag attachment.

Length: 13-3/16"•SED 328110-1

Sea-Dog Rail Mount Flagpole HolderMade from 304 S/S and injection moulded nylon. Flagpole holder will accept any

agstaff with a 3/4" base diameter.( agstaff not included)

Length: 4-5/8"•SED 327121-1

Sea-Dog Pulpit FlagpoleFits 7/8" - 1" tubing and comes complete with fasteners and split rings for easy ag attachment.

Length: 15-1/2"•SED 328115-1

EXTERIO

R H

AR

DW

AR

E265Bilge Blowers

Jabsco/PAR 4" Bilge BlowersTough, corrosion proof reinforced plastic housing. Reliable automotive type motor for long life and low current operation. 4" intake. Air ow: 250 CFM. Available in 12 or 24 volts.

H: 9" x W": -3/4" x L: 8-3/4"•ITT 35400-0000 12VITT 35400-0010 24V

Jabsco/PAR 4" Continuous Duty Bilge BlowersFlange mount•250CFM•Minimum 10,000 hour motor•H: 9-1/8" x W: 8-3/16" x L: 8"•

ITT 35760-0092 12V, 11 ampITT 35760-0094 24V, 6 amp

Electrohome 3" Bilge Blower12 volt/8 amp. ABS plastic housing. 3 inch intake pipe. Air ow 100 CFM. Flange mount allows discharge port to be fastened directly to a at external surface to minimize required ducting.WES MB-125Optional mounting bracket allows an "in-line" installation of bilge blower. Bracket may be rotated to permit installation in any direction.WES BB101A

Sea-Dog 3" Bilge Blower12V, 3 amp•ABS construction•100 cubic feet per minute •Uses 1/4" fasteners•

SED 435210

Delta 'T' Marine LIL' Champ 4" BlowersFlow rates to 350 CFM •Performs well even under static •pressure loadsHigh-impact marine grade plastic •housing Internally mounted motor for compact •design Sealed D/C direct-drive motor. The •motor is a totally enclosed (TEAO), double-shielded, ball bearing type, which is constructed with die cast aluminum end plates, O-ring seals, stainless steel shaft and tough black Te on epoxy coating for superior corrosion resistance. Armatures are dynamically balanced for quiet, vibration-free operation)Dynamically balanced armatures for quiet vibration-free •operation Includes universal powder coated bracket for a wide variety of •mounting options Slim pro le H: 10" x W: 4.43" x D: 11.5"•

DTS 500-304121-IP 12V DTS 500-304242-IP 24V

Parts:DTS 505-201251 Hose adapter for intake

Jabsco/PAR 3" Flexmount Bilge BlowerTough, corrosion proof reinforced plastic housing. Reliable automotive type motor for long life and low current operation. Unit can be rotated in the mounting bracket to facilitate installation. 3" intake. Air ow: 105 CFM.

5-1/2" H x 5" W x 6-3/4" L•ITT 35515-0010 12 volt, 4.3 amp

Part # Volts Hose Size CFM Amp Draw Size

Standard

ATT 1731-4 12 3" 120 2.6 3"

Water-resistant

ATT 1733-4 12 3" 120 2.6 4"

ATT 1745-1 24 4" 200 1.9 4"

Size A x B x C x D

3" 3-5/8" x 4-1/2" x 5-1/16" x 3"

4" 4-17/32" x 5-1/2" x 6-1/16" x 4"

Attwood Inline Turbo Bilge BlowersHigher system air ow and lower amp draw. Tough, corrosion-proof ABS housing dampens sound and vibration. Features include a smaller, more compact straight-thru design, integral mounting bracket and hose retention tabs. Scienti cally designed ve-blade fan features a nose cone and specially cambered stator vanes.

► Also See: Blower Hose pg 564

266

EXTERIO

R H

AR

DW

AR

E

Bilge Blowers / Vents

Attwood Collector BoxesBlack Polystyrene plastic construction for corrosion free service. Designed for air intake or exhaust. Takes 3" hose.

ATT 1341-1 For model 1494 and 1425 ventsBox cavity measures 15/16" W x 15-7/16" L x 4" D•

ATT 1345-1 For model 1495 ventBox cavity measures: 2-3/16" W x 16" L x 3-15/16" D•

ATT 1348-1 For model 1438 and 1439Box cavity measures: 2-3/46" W x 18" L x 5" D •For 4" hose•

Sea-Dog ABS Collector Boxes

Vacuum formed ABS plastic, available in right and left hand versions for 3 and 4" hose. Depth: 5"

Part # Hose A B Use W/Vent Mount

SED 331293 3" 12-1/4" 3-5/8" 331290337290

Right

SED 331294 4" 12-1/4" 3-5/8" 331290337290

Right

SED 331296 3" 12-1/4" 3-5/8" 331290337290

Left

SED 331298 4" 12-1/4" 3-5/8" 331290337290

Left

SED 331303 3" 7-1/4" 3-5/8" 331300 Left

Attwood Modular Vents

Modular construction allows these patented vents to accommodate any ventilation opening size by interlocking two or more centre sections. End sections interlock to the centre section for a nished appearance. The A.B.S plastic will not corrode or discolour.ATT 1438-F1 Centre whiteATT 1439-F1 End white

Attwood Louvred Vent

Made from rugged ABS plastic •Installation hole: 2-1/4" x 16-1/8"•L: 17-7/8" x W: 3-7/16" x D: 3/4"•

ATT 1495-1 Off-WhiteATT 1495-A1 Black

Attwood Flush Louvred VentCanted louvres de ect rain and spray and help conceal the duct. Vent can be painted to match boat gelcoat. ASA plastic UV stable, will not discolour.

Use #8 screws•2-3/4" W x 17-9/16" L x 1/4" H•

ATT 1425-5 White

Attwood Venturi VentsMade of rugged ABS plastic, will not discolour or corrode.

Width: 2-3/4" x Length: 17" x Height 11/16"•Installation hole: 2-1/8" x 15-1/2"•

ATT 1494-5 ChromeATT 1494-A5 BlackATT 1494-F1 White

Rule Inline Bilge BlowersDesigned for ef cient, high output operation, these blowers offer front and rear seals and corrosion resistant motor housing for long life. Mounts on any at surface.

Part # Size Volts C.F.M. Amps

RUL 140 3" 12 135 2.9*

RUL 240 4" 12 235 4.3*

*Rated at 13.6 volts

AttwoodTurbo 4000 Series Inline BlowersUtilizing advanced fan blade design techniques, these blowers match air ow of existing in-line blowers at a signi cantly reduced noise level. For added durability, Attwood incorporates an engineered plastic housing that resists deformation during installation and prevents blade to housing interference.ATT 1747-4 4" 12V blowerATT 1749-4 4" 12V water resistant blower

EXTERIO

R H

AR

DW

AR

E267Vents

Sea-Dog Slotted VentilatorMade of ABS plastic•5 louvre engine vent•L: 13-1/4" x W: 4-3/4" x D: 1-1/6"•

SED 337290 WhiteSED 337291 Black

Sea-Dog Louvred 8 Slot Vents

Stamped 316 stainless steel•Use #6 R.H. screws•L: 16-3/8" x W: 2-7/8" x D: 7/8"•

SED 331200

Sea-Dog Slotted Ventilators

Stamped 316 Stainless Steel. Use #6 R.H. screws.Part # A B C D Louvers

SED 331290-3 3-5/8" 12" 4-1/2" 12-7/8" 5

SED 331300 3-5/8" 7-1/8" 4-1/8" 8-1/8" 3

Sea-Dog Louvred VentilatorsMade of injection molded ABS plastic.

L: 17-1/2" x W: 2-5/8" x D: 1-7/8"•SED 337210-1 WhiteSED 337211-1 Black

Sea-Dog Stainless Steel Louvred Vents

304 stamped S/S•Use #6 RH screws•

Part # A B

SED 331380-1 5" 2-5/8"

SED 331390-1 5" 4-5/8"

SED 331400-1 9-1/8" 4-5/8"

SED 331410-1 5" 9"

Perko Louvred Ventilators

Chromed brass•Screw size #4 R.H •

Part # Size Louver Length

Horizontal x 2

PER 334-002-DP 3" x 2-1/2" 2"

PER 334-004-DP 5-1/2" x 2-1/2" 2"

PER 334-006-DP 8" x 2-1/2" 2"

Horizontal x 3

PER 335-006-DP 5-1/2" x 3" 2"

PER 335-009-DP 8" x 3" 2"

PER 335-09A-DP 11" x 3-1/2" 3"

Vertical x 1

PER 336-05A-DP 5-3/8" x 4" 3"

PER 336-06A-DP 6-3/8" x 4" 3"

334 335 336

Sea-Dog Louvred Vents

Injection molded ABS plastic•Use #8 FH screws•

Part # Colour

Cutout Overall

A B C D

SED 337400-1 Black 3-11/16" 9" 4-7/8" 10-1/8"

SED 337401-1 White 3-11/16" 9" 4-7/8" 10-1/8"

Sea-Dog Louvred Vent

Injection molded black ABS plastic•Use #8 FH screws•

Part #

Cutout Overall

A B C D

SED 337500 2-15/16" 6-7/8" 3-7/8" 7-7/8"

268

EXTERIO

R H

AR

DW

AR

E

Vents

Perko Chrome Cowl VentilatorChrome plated zinc with a black •plastic baseFor 3" duct•Opening square inches: 8" •5-3/4" L x 4-3/8" W x 2-5/8" H•

PER 1312-DP-CHR

Perko Cowl VentilatorChrome plated zinc for 3" duct•Opening square inches: 7-1/3" •5-1/4" L x 4" W x 2-3/4" H•

PER 870-CHR

Sea-Dog Screened Vents

304 S/S construction•Use #10 FH fasteners•

Part # A B C D

SED 331712 8-5/16" 2-1/4" 7-11/16" N/A

SED 331713 8-13/16" 3-3/8" 8-3/16" 2-3/4"

Sea-Dog Locker VentStamped 304 S/S•Use #8 RH fasteners•6-3/4" L x 2-3/8" W•

SED 331620-1

Perko Transom or Locker VentilatorChrome plated brass •7" x 2-1/2"•

PER 550-DP-CHR

Perko Transom or Locker VentilatorChrome plated zinc•Grill type screen • 6" x 2"•

PER 1271-DP-CHR

Perko Transom or Locker VentilatorChrome plated zinc•Grill type screen•8-3/8" x 2-1/4"•

PER 1238-DP-CHR

Attwood Cowl VentilatorFor use with 3" I.D. ventilation hose. Features exible hose ange that is screwed onto base, then vent snaps onto the ange. Constructed of chrome-plated die-cast Perma-Plate ZAMAK. Flange is plastic. Use #8 screws.

Length: 6" x Width: 5-5/16" x Height: 2-1/4"•ATT 1364-A1

Perko VentilatorChrome plated brass frame•Perforated stainless steel screen •7-1/4" L x 1-1/2" W•

PER 707-DP-CHR

Sea-Dog Stainless Steel Midget Vents

Stamped 304 Stainless Steel. Uses #6 RH fasteners.Part # A B C Package

SED 331360 1-5/8" 1-3/4" 1/2" Bulk

SED 331360-1 1-5/8" 1-3/4" 1/2" Display

SED 331370 2-1/4" 2-1/8" 5/8" Bulk

SED 331370-1 2-1/4" 2-1/8" 5/8" Display

Gemlux S/S Clamshell Vents

Stainless steel heavy duty .80 thickness.Part # Height Width Depth Fastener

GEM 330839-2 7/8" 1/2" 1-5/8" #4

GEM 330851-1 9/16" 2" 2" #6

Perko Clam Shell Ventilators

Chrome plated brass•Part # Length Width Height

PER 315-DP1-CHR 1-5/8" 1-1/2" 7/16"

PER 315-DP2-CHR 2" 2" 9/16"

Perko Clam Shell VentilatorChrome plated brass •Base dimension: 4" x 3-3/4"•1-5/8" H x 2-1/2" W•

PER 339-DP-CHR

EXTERIO

R H

AR

DW

AR

E269Vents

Sea-Dog Nylon Hose Vents

Injection molded ABS•Use #8 FH screws•

Part # A B C Hole

Black

SED 337325 2-13/16" 2-7/16" 3-5/8" 3"

SED 337425 3-9/16" 3" 4-15/16" 4"

White

SED 337315 2-13/16" 2-7/16" 3-5/8" 3"

SED 337415 3-9/16" 3" 4-15/16" 4"

Sea-Dog Hose Thru Vents

Injection molded polypropylene•Use #8 FH screws•

Part # Colour A B C Hole

SED 337310 White 2-13/16" 5/8" 3-5/8" 3"

SED 337320 Black 2-13/16" 5/8" 3-5/8" 3"

ITC S/S Clad VentsHighly polished stainless steel clad cover plate over plastic base vents are available in 3” (3.25” cutout) & 4” (4.25” Cutout) diameters. Each features the patented press- t that grips the cutout hole and eliminates the need for fasteners. ITC 81932SS-HP-D 3"ITC 81933SS-HP-D 4"

Perko Locker VentilatorsChrome plated brass•Use #6 R.H. fasteners •

PER 330-DP1-CHR 2-1/2" DiaPER 330-DP2-CHR 3-1/4" Dia

Sea-Dog Flush Vents

Injection molded ABS plastic •Use #8 FH screws•

Part # A B C Hole

Black

SED 337326-1 2-13/16" 2-3/4" 3-5/8" to 3"

SED 337426-1 3-9/16" 3-3/4" 4-15/16" to 4"

White

SED 337316-1 2-13/16" 2-3/4" 3-5/8" to 3"

SED 337416-1 3-9/16" 3-3/4" 4-15/16" to 4"

Sea-Dog Deck Drain/Locker Vents

ABS plastic•Use #10 FH fasteners•

SED 340021-1 4-3/16" diameter, WhiteSED 340041-1 5-5/8" diameter, WhiteSED 340020-1 4-3/16" diameter, Black

Sea-Dog Half Shell Vent Covers

Formed 304 stainless steel construction. Vent covers t part number SED 331424 and SED 331425 round vents. They also can be used as nger pulls. Use #6 RH fasteners.

Part # A B C

SED 331464 4" 2-3/16" 9/16"

SED 331465 5" 2-9/16" 7/8"

Sea-Dog Stainless Steel Clam Shell Vents

Stamped 304 Stainless Steel. Bulk. Uses #6 RH screws.Part # A B C

SED 331340 7" 5-3/4" 2-1/4"

SED 331350 7-1/2" 6-3/4" 2-7/8"

Beckson VentilatorsVacuum-formed white ABS air scoops with white KORAD® cap to prevent cracking or discolouring.

1-1/2" H x 5-1/2" W x 7" D•BEC C-4

270

EXTERIO

R H

AR

DW

AR

E

Vents

Nicro Airvent 500The Air Vent 500 is an economical passive exhaust vent that moves a high volume of air. ABS construction with a frosted polycarbonate centre panel which also allows light down below. This vent will move 600-1000 cubic feet of air per hour in a 15 knot breeze. It has a locking shut-off damper operated from below. The low pro le vent screws directly to the deck. Height: 1-3/4”, Dia: 7”, and uses a 3-3/4” cut out hole.NIC 28810 3"

Sea-Dog Cowl VentsDurable and exible white PVC with traditional red inside cowl. Cowl snaps on to deck plate securely. Cowl may be removed and replaced with ush deck plate closure in rough weather. Vents come complete with deck plate.

Part # Description Height

SED 727130 3" Low pro le vent 5"

SED 727140 4" Low-pro le vent 5-7/8"

SED 727135 3" Standard vent 7-3/4"

SED 727139 3" Deckplate only

SED 727149 4" Deckplate only

Nicro Solar Mini-VentsThe Solar Mini-Vent is the smallest diameter solar vent. Just 7" across and 1-3/4" high. It is also very durable, since it is made of frosted polycarbonate with UV inhibitors. The Solar Mini-Vent operates only as an exhaust vent. It will remove around 700 cubic feet of air per hour at night in a 15 knot breeze. This vent has a shut-off damper operated from below. Attaches directly to the deck. Cut out: 3-3/4".NIC N20030 Vent with S/S cover

Parts:NIC 28830 Cover only, S/S

Nicro Solar VentThis solar vent provides boaters with fresh air ventilation.

Rechargeable battery allows for •24-hour continuous operation Whisper quiet operation •Interchangeable intake and exhaust •fans Direct to deck installation •Built-in on/off switch •2-year limited warranty•

NIC N20703-S 3"NIC N20704-S 4"

Parts:NIC 20590 Replacement battery

Oceanair Vent/Light ComboA new way to provide light and ventilation through the same unit. The combined extractor fan and integral halogen light are especially bene cial in con ned areas, such as boat shower rooms or galleys. Can be installed as a wall, ceiling or panel xture. Made from temperature resistant composite material, the unit has three modes of operation: combined, fan or light.

Long life 2.8W motor •50,000 hours operating life expectancy •Ideal for use in con ned space•Diameter: 5-1/2" x Cutout: 4"•

OCE VL-12V-C ChromeOCE VL-12V-W White

Vetus Mushroom Ventilators

Polished 316 stainless steel construction•Includes mosquito screen and synthetic counter ange•Screw size #8 R.H•

Part # Flow AreaSquare inch Dia Cutout

VTS PORTOS Flow 4.7" 4-5/8" 3-11/32"

VTS ATHOS Flow 7.2" 6" 4-13/16"

Sea-Dog Butter y VentsStamped 304 S/S•Features side knob•Use #6 RH fasteners•

SED 331445 4" diameterSED 331455 5" diameter

Sea-Dog Drain CoverStamped S/S•Works well as a locker ventilator•3-1/4" diameter •Use #6 RH fasteners•

SED 331600-1

Sea-Dog Ship's VentilatorCentre knob, twist to open or close•All S/S construction•Screw size #6 R.H.•

SED 331450 5" diameter

Sea-Dog Stainless Steel Round Louvred Vents304 stamped S/S •

SED 331424-1 4"SED 331425-1 5"

EXTERIO

R H

AR

DW

AR

E271Vents / Tank Vents

Mecca Tank VentsMade from 316 stainless steel this tank vent is attractive in appearance and very functional. Has a 30 mesh monel wire screen for a ame arrester. Can be used for either a gas, waste or water tank. Uses NPT 2-1/2" long threads and comes with a bronze retaining nut. MEC 3/4" NPT 1" head diameterMEC 1" NPT 1-3/8" head diameterMEC 1-1/2" NPT 1-3/4" head diameter

Gemlux Flush Mount Gas Tank VentsCan be installed with vent up or down. Extra wide ange . Includes GEMLUX® screen, vent cover, thin backing plate and thick backing plate for custom t. Fits 5/8" hose. Requires a 1-1/2" cutout.GEM 330954-1 90° elbowGEM 330956 Straight

Whitecap Gas VentsStainless steel ush round head vents for 9/16" hose.

Hole size: 3/4"•WHI 6005C StraightWHI 6006C 90°

Vetus UFO Deck VentilatorStainless steel permanently open ventilators are rain and splash proof. Complete with a plastic ventilation grill for nishing purposes.

Outside dia; 7-7/8", Height; 1-13/16"•Finishing grill Dia: 4-13/16"•Uses #8 screws•

VTS UFO

Vetus UFO Deck VentilatorThis 12 volt fan is designed for saloons, cabins, toilets and is ideally suited for heat extraction near refrigerators. Hardly audible and suitable for installation to both ceiling and wall it can also be used together with VETUS deck ventilators UFO and UFO-Trans. With the extremely low energy consumption of 0.22 Amp. at 12 volt, this ventilator is particularly suitable for boats. The special long-life computer motor has a life-time of not less than 50,000 hours. Since the motor does not have carbon brushes, the noise level is extremely low. Technical Details:

The long life computer motor can run continuously •Life expectancy is at least 50,000 hours of operation •The capacity is 42 cfm •Provided with a switch for 2 speeds •Static pressure: 1/4" H2O•

VTS FAN12

Perko Gas Tank VentsChrome plated pressure cast bronze with monel wire mesh screening. Elbow is bronze.

Maximum thickness: 7/8"•Part # Pipe Size

PER 503-DP3-CHR 3/8" x 3/8"

PER 503-DP4-CHR 1/2" x 1/2"

Perko Gas Tank VentsChrome plated pressure cast bronze with monel wire mesh screening.

Max. thickness: 5/8"•PER 515-DP3-CHR 3/8"PER 515-DP4-CHR 1/2"

Perko Gas Tank VentChrome plated cast bronze with removable 30 mesh, monel wire screen ame arrester.

1/2" NPT. O.D. ange: 2-1/2"•Neck length: 1-1/2"•

PER 505-DP-CHR

Perko Gas Tank Vent Chrome plated zinc with monel wire mesh screening.

Hose size: 5/8"•Max. wood thickness: 3/4"•

PER 506-DP4-CHR

Sea-Dog Flush Mount Tank Vent

Investment cast 316 stainless steel.SED 353210-1

Perko Gas Tank VentsChrome plated pressure cast bronze•Monel wire mesh screening •

Part #Hose Size

Max.Thickness

PER 509-DP4-CHR 5/8" 3/4"

PER 509-DP5-CHR 3/4" 5/8"

Sea-Dog Flush Mount Tank Vent

90° investment cast 316 stainless steel construction.SED 353230-1

272

EXTERIO

R H

AR

DW

AR

E

Tank Vents

Sea-Dog Chrome Zinc Gas Tank Vent

SED 352100-1

Sea-Dog Stainless Steel Gas Tank Vent

Comes with rubber gasket.SED 352210-1

Sea-Dog Die Cast Zinc Gas Tank Vent

Comes with rubber gasket. For 5/8" hose. Chrome plated nish.SED 352110-1

Sea-Dog Chrome Brass Gas Tank Vent

Comes with rubber gasket.SED 352020-1

Sea-Dog Nylon Gas Tank Vents

Injection molded nylon available in black or white. SED 357100-1 BlackSED 357105-1 White

Attwood Gas Tank VentUnique design makes this gas tank vent extremely splash resistant. Constructed of fuel-resistant polypropylene, totally corrosion resistant. Stainless steel ne meshed screen can be easily cleaned by unscrewing the exterior cap.

For use with 5/8" I.D. hose•Installation hole diameter: 3/4"•Maximum hull thickness 7/16"•

ATT 1607-3

Attwood 90 Degree P-Trap Fuel Tank VentsThese low pro le fuel tank vents help prevent water from entering the fuel tank during normal sea conditions and washdowns. The patented design features a series of baf es and traps keeping water out and eliminating the need for an anti-siphon loop in the vent hose.

For 5/8" I.D. hose•Maximum hull thickness 9/16"•

ATT 1670-3 Black with black coverATT 1671-1 Black with white cover

Perko Black Gas Tank Vent with Swivel ElbowBlack plastic cap with zinc alloy elbow and removable 30 mesh, stainless steel screen ame arrester. Design allows elbow to be rotated to any position.

Max hull thickness 3/4"•Hose size 5/8"•

PER 571-DP4-BLK

Marelon Tank VentA new idea in fuel tank vents. For hulls with solid cores only. Unit press- ts into 3/4" diameter hole without the need of a nut. Stainless steel screen will not corrode and has no plating to chip. These vents are precision molded in high-strength non-corrosive Marelon® making them completely free from corrosion and electrolysis.

For 5/8" hose. 2.75 cm x 7 cm.•MPS 907029

Sea-Dog Gas Tank Vent

Machined brass chrome plated. SED 352010-1

Sea-Dog 90 Degree Gas Tank Vents

90o hose tting for tight areas. Comes with rubber gasket. Part # A B C Construction

SED 352030-1 7/8" 2-3/8" 5/8" Chromed brass

SED 352230-1 1" 2-5/8" 5/8" 316 S/S

Marine East Plastic Gas Tank VentBlack plastic vent with a 1-1/4" diameter head. 100o

hose barb for 5/8" hose. Maximum hull thickness 3/4"•

MEP 3012

EXTERIO

R H

AR

DW

AR

E273Deck Plates

Beckson Screw Out Deck PlatesScrew-out plate was designed to provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning centre and an innovative gasket to assure a watertight seal. A patented back-up sealing wall leaves the plate waterproof, even if the gasket is removed. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Deck plates also are used for access, inspection, and clean out for tanks and compartments.

Uses #8 FH fasteners•BEC DP40-W 4" WhiteBEC DP60-W 6" White

Beckson Twist Out Deck PlatesDeck plate is designed to conceal mounting fasteners under the quick twist cover. The low pro le cover is self-centering, features uniquely styled nger grips and quickly locks in place with a 1/8 twist. Three separate sealing rings assure a watertight closure. Plates are molded of high-impact, marine quality plastic, with ultraviolet inhibitors for prolonged service.

Uses #8 FH fasteners•BEC DP50-W 5" White

Rabud Deck PlateScrew out 6" plastic deckplate with clear cover and O-ring for a water tight seal.RHS 6"LCW

Tempress Screw-in Deck PlatesWatertight deck plate with an O-ring seal and grooved ange bottom for bedding compound retention. Screw-in styrene centre. Use #8 PH screws.

Part # I.D. O.D. Cut Out Colour

TMP 43030 4" 6-1/8" 4-3/4" White

TMP 43035 4" 6-1/8" 4-3/4" Black

TMP 43130 5-7/8" 8-1/8" 6-3/4" White

Tempress Pry Out Deck PlatesWatertight deck plates with secure snap- t closure and o-ring seal. Flange has bevelled edge, pry out notch and six countersunk fastener holes. Available in 6" and 8" sizes with safety textured surface. Structural material stands up to tough service, extreme weather, and solvents (even acetone).

Uses #8 PH fasteners•Part # I.D. O.D. Cut Out Colour

TMP 43190 5-5/8" 8-1/8" 6-3/4" White

TMP 43191 5-5/8" 8-1/8" 6-3/4" Ivory

TMP 43195 5-5/8" 8-1/8" 6-3/4" Black

TMP 43330 7-7/8" 10-1/8" 8-3/4" White

TMP 43331 7-7/8" 10-1/8" 8-3/4" Ivory

TMP 43335 7-7/8" 10-1/8" 8-3/4" Black

Replacement ''O'' RingsTMP S-0053 4" Deck plate o-ringTMP S-0054 6" Deck plate o-ringTMP S-0055 8" Deck plate o-ring

Watertight - completely seals against water intrusion. •One-piece unit - no trim ring, fasteners, or sealant. •Ease of use - a turn of the “T” handle releases or secures the •deck plate. Patented design loads the deck plate at the centre, distributing •sealing pressure uniformly at the seal ring.

Part # Cut Out Bar Length

ARM DP-6"BLACK 6-3/4" 8-1/4"

ARM DP-8"BLACK 8-3/4" 10-1/4"

ARM DP-10"BLACK 10-3/4" 12-1/4"

Armstrong Nautical Deck Plates

Bomar Locking Centre Deck PlatesHigh impact, polycarbonate U.V. stabilized deck plates. Acetone resistant. The centre plate has a nonskid

nish, a unique nger-tip lift and twist locking mechanism, and an O-ring seal. Uses #10 F.H. fastener.

Part # Size Colour

Dimensions

Cut OutI.D. O.D.

BOM G840 8" White 7-5/16" 10-9/16" 8-1/2"

BOM G844 10" White 9-1/4" 12-1/2" 10-1/2"

BOM G845 10" Black 9-1/4" 12-1/2" 10-1/2"

Sea-Dog Screw-Out Deck Plates With Collar

Screw-in, molded collar deck plate•Use #8 FH screws•

Part # Colour A B C D

SED 337142 White 4" 5-3/4" 4-1/2" 5-1/8"

SED 337167 Black 6" 8-1/8" 6-1/2" 7-1/4"

274

EXTERIO

R H

AR

DW

AR

E

Deck Plates / Hatches

Sea-Dog Inspection CoversInjection molded ABS •Uses #10 fasteners•Cutout: 4-1/4"•Diameter: 5-5/8"•

SED 337050-1 BlackSED 337051-1 White

Sea-Dog Screw Out Deck Plate, w/ Clear Centre

Made from injection moulded A.B.S./Polycarbonate these deck plates allow for visual inspection of watertight compartments, storage lockers and fuel ttings without even having to remove the lid. Use #8 FH screws.

Part # A B C D

Black

SED 337146-1 4" 5-3/4" 4-1/2" 5-1/8"

SED 337156-1 5" 6-3/4" 5-1/2" 6-1/8"

SED 337166-1 6" 8-1/4" 6-1/2" 7-1/4"

White

SED 337141-1 4" 5-3/4" 4-1/2" 5-1/8"

SED 337151-1 5" 6-3/4" 5-1/2" 6-1/8"

SED 337161-1 6" 8-1/4" 6-1/2" 7-1/4"

Sea-Dog Screw-Out Deck Plates

Screw out deck plates are ABS injection molded to the highest standards using top quality UV stabilizers and anti-oxidants.

Uses #8 FH screws•Part # A B C D

Black

SED 337145-1 4" 5-3/4" 4-1/2" 5-1/8"

SED 337145 4" 5-3/4" 4-1/2" 5-1/8"

SED 337155-1 5" 6-3/4" 5-1/2" 6-1/8"

SED 337165-1 6" 8-1/4" 6-1/2" 7-1/4"

White

SED 337140-1 4" 5-3/4" 4-1/3" 5-1/8"

SED 337150-1 5" 6-3/4" 5-1/2" 6-1/8"

SED 337160-1 6" 8-1/4" 6-1/2" 7-1/4"

SED 337160 6" 8-1/4" 6-1/2" 7-1/4"

Suf x (-1) indicates display package

Sea-DogConcealed Fastener Screw Out Deck Plate

Concealed fastener deck plate with collar •Injected molded nylon/ABS construction •Cutout: 4-1/2", Ring: 5-3/4"•

SED 337247 Black

Seadog Deck Plate

Investment cast 316 stainless steelSED 335654

Rabud Access Hatches

Heavy duty, chemical resistant, white UV stabilized plastic deck hatches with stainless steel hinges.

Fastener #10 F.H.•Part # I.D. O.D.

RHS 711HLAW 7" x 11" 10-1/4" x 14-3/8"

RHS 1020HLAW 10" x 20" 13-1/2" x 23"

Parts:RHS 1033 Replacement handle

Beckson Stow Away HatchThis storage hatch can be used for glove compartments, engine control covers, re extinguisher storage, etc.

Opens a full 180º•Slip clip snubbing latch holds •cover closedOpen centre cover handle provides easy nger •grip to open and closeOutside: 6-3/4" x 12-3/4" •Hole cut-out 4-1/2" x 10-1/2"•Uses #10 FH fasteners•

BEC PH410MWC-20

EXTERIO

R H

AR

DW

AR

E275Hatches

Beckson HT Series Access HatchesBeckson HT Series Hatches offer a sleek, low pro le (1/2") appearance, with nothing to snag lines on. Features include hidden fasteners, integral 180o hinges and easy-grip latches. Designed for horizontal or vertical installation. Integral hinge and latch systems assure perfect alignment and ease of installation. Ideal for all types of storage, bait or sh wells, and electrical or fuel line access. Nonskid, diamond pattern surface.

Uses #10 FH fasteners•Part # Colour Latches I.D. O.D. Cut-Out

BEC HT-1115-W White 1 7-1/4" x 11-1/4" 10-3/4" x 14-3/4" 7-7/8" x 11-3/4"

BEC HT-1115-D Grey 1 7-1/4" x 11-1/4" 10-3/4" x 14-3/4" 7-7/8" x 11-3/4"

BEC HT-1424-W White 2 10-1/2" x 20-3/8" 14" x 24" 11-1/8" x 20-7/8"

BEC HT-1821-N Ivory 2 14-5/8" x 17" 18-1/8" x 20-1/2" 15-3/8" x 17-3/8"

BEC HT-1821-W White 2 14-5/8" x 17" 18-1/8" x 20-1/2" 15-3/8" x 17-3/8"

Tempress Access Hatches With Cam LatchThe Access Cam Hatch is made from a glass lled polypropylene, for strength and durability. All Access hatches are designed for heavy traf c areas, and will withstand people walking or standing upon them. Features a dog down latch, that compresses the gasket to create a weather tight seal with a quarter turn of the wrist. A patented integral hinge assembly that allows for easy lid removal. The bevelled skirted lid covers all fasteners.

Part # Colour I.D. O.D. Cut-out

TMP 44330 White 7" x 11" (1115) 10-3/4" x 15" 8-3/4" x 12-5/8"

TMP 44333 Dark Gray 7" x 11" (1115) 10-3/4" x 15" 8-3/4" x 12-5/8"

TMP 44530 White 9-1/2" x 19-1/4" (1323) 13" x 23-1/4" 11" x 20-7/8"

TMP 44533 Dark Gray 9-1/2" x 19-1/4" (1323) 13" x 23-1/4" 11" x 20-7/8"

Fasteners required 10 ea. #12 pan head screws for 7" x 11"Fasteners required 12 ea. #12 pan head screws for 9-1/2" x 19-1/4"

Tempress Hatch LinersThese tough, impact resistant liners are perfect for combining with the Tempress utility hatch to make a self-contained storage compartment, live well, or dry gear locker. The 1" anged liners are installed underneath the hatch and anchored in place when hatch

ange screws are installed. The small anged liners are dropped in place and may remain portable. White.Part # Dimensions Combines with Utility Hatch

TMP 41400 7-1/8" x 11-1/8" x 6" deep 44290, 44293, 44230, 44231, 44233

TMP 41504 11-1/4" x 21-1/8" x 9" deep 44431, 44430, 44432, 44433

TMP 41506 11-1/4" x 21-1/8" x 12" deep 44431, 44430, 44432, 44433

Part # Colour I.D. O.D. Cut-out

TMP 44230 White 7" x 11" 10-3/4" x 15" 8-3/4" x 12-5/8"

TMP 44430 White 9-1/2" x 19-1/4" 13" x 23-1/4" 11" x 20-7/8"

Utility Hatch Parts

TMP S-0006 1115 - White hinge (1pc)TMP S-0007 1115 - Ivory hinge (1pc)TMP S-0009 1115 - Grey hinge (1pc)TMP S-0010 1323/1330 - White hinge (1pc)TMP S-0011 1323/1330 - Ivory hinge (1pc)TMP S-0013 1323/1330 - Grey hinge (1pc)

Tempress Access Hatches With Slam LatchThe Access Slam Hatch is made from a glass lled polypropylene, for strength and durability. All hatches are designed for heavy traf c areas, and will withstand people walking or standing upon them. Features an easy close slam latch that forms a weather tight seal just by closing the hatch. Hatches also utilize a patented integral hinge assembly that allows for easy lid removal. The bevelled and skirted lid covers all fasteners for a clean look above or below decks.

Fasteners required 10 ea. #12 pan head screws for 7" x 11"Fasteners required 12 ea. #12 pan head screws for 9-1/2" x 19-1/4"

276

EXTERIO

R H

AR

DW

AR

E

Bomar Hatches / Portlights

Bomar Nibo Low Pro le Traditional HatchesAnodized HD aluminum frames•Vent position•Heavy-duty acrylic top •Quick acting tie down dogs•Uses #10 FH fasteners•

This hatch is in a semi- ush style which is the latest Eurostyle hatch for the high performance cruiser/racer. Silver anodized aluminum guarantees long lasting nish. Special marine aluminum alloy with high magnesium content. Tough acrylic top assures privacy, yet allows in plenty of light. Fast and easy to adjust new style collet arm has no knobs or parts to loosen and fall off or get caught on clothing. Locked vent position. Models - '10A' have a 1" spigot.

Part #Hatch

OpeningHole Cut

Out O.D. Deck

Flange

BOM 1000-10A 9-5/8"9-5/8"

10-3/4"10-3/4"

12-3/8"12-3/8"

BOM 1029-10A 12-1/4"17-3/8"

13-3/8"18-1/2"

15"20 1/8"

BOM 1039-10A 19-1/8“19-1/8”

20-1/4"20-1/4"

21-7/8"21-7/8"

BOM N1049-10AX4 24"24"

25-1/8"25-1/8"

26-3/4"26-3/4"

BOM 1070-10A 15-7/16“15-7/16”

16-1/2"16-1/2"

18-3/16"18-3/16"

Bomar Nibo High Pro le HatchesA heavy duty extruded hatch formed into an attractive modern shape. Silver anodized aluminum guarantees long lasting nish. Special marine aluminum alloy with high magnesium content. Tough acrylic top assures privacy yet allows in plenty of light. Fast and easy to adjust new style collet arm has no knobs or parts to loosen and fall off or get caught on clothing. Heavy duty hinges. The hatch has a locked vent position. Models - 'A' without spigot and Models - '10A' with 1" spigot. Note: Screen will not install without trim ring.

Uses #10 FH fasteners•

Part #Hatch

Opening Hole Cut OutO.D. Deck

Flange

BOM 2029-10A 12-1/4"17-3/8"

13-5/16"18-7/16"

15"20-1/8"

BOM 2039-10AX 19-1/8"19-1/8"

20-3/16"20-3/16"

21-7/8"21-7/8"

BOM 2049-10AX 24"24"

25-1/16"25-1/16"

26-3/4"26-3/4"

BOM 2070-10A 15-3/8"15-3/8"

16-7/16"16-7/16"

18-1/8"18-1/8"

BOM N2080-10A 17-3/8"17-3/8"

18-7/16"18-7/16"

20-1/8"20-1/8"

BomarMolded Portlight Gray Series RectangularStainless steel hardware, angled spigot, white frame with clear lens, complete with trim ring and screen.

Hatch opening: 4" x 11"•Cut-out: 5-1/2" x 12-1/2". O.D•Deck ange: 7-13/16" x 14-11/16"•Spigot length: 2-1/8"•

BOM G512-AD-27BOM GP902-01W Replacement knob White

BOM P2000-18L I/O New style left latch dog assemblyBOM P2000-18R I/O New style right latch dog assembly BOM P2000-20 3" high pro le hingeBOM P2000-27 Mushroom CapBOM P2000-25 Gasket low pro leBOM P2000-26 Gasket high pro leBOM P2000-30 Bracket for MK11 tie downBOM P2000-53 Latch dog assembly right/lockingBOM P2000-52 Latch dog assembly left/lockingBOM P2000-66 White screen keepers (nibs)BOM P2000-84-R Latch dog assembly right/non-lockingBOM P2000-84-L Latch dog assembly left/non/lockingBOM P2000-75-17 Right riser arm 1039BOM P2000-75-18 Right riser arm 1022BOM P2000-75-21 Right riser arm 1049BOM P2000-7510.75 Right riser arm 1029BOM P2000-76-13 Left riser arm 1070BOM P2000-76-17 Left riser arm 1039BOM P2000-76-18 Left riser arm 1022BOM P2000-76-21 Left riser arm 1049BOM P2000-86 In./out.quick cap w/ sq shaft

P2000-53

P2000-Arm

P2000-18LP2000-27 P2000-30

Bomar Parts for 100 Series Hatches

Bomar cast hatches can be identi ed by having a cast aluminum frame with molded hinges. They generally have a cast aluminum riser.BOM P100-07 Female knobBOM P100-09 Latch dog assemblyBOM P100-52 9/16" gasket

P100-07

P100-09

Bomar Parts for Molded Hatches 1000/2000 Series

EXTERIO

R H

AR

DW

AR

E277Hatch Accessories / Portlights

Bomar Hatch Trim Rings & Screens

Part # Fits Hatches Description Colour

BOM NS2000-EX N1000-10A, N2000-10A Screen N/A

BOM NT2000-BLK N1000-10A, N2000-10A Trim Ring Black

BOM NT2000-OFF-W N1000-10A, N2000-10A Trim Ring Off White

BOM NS2029-EX N1029-10A, N2029-10A, N0029-10FX, N0029-FXN Screen N/A

BOM NT2029-BLK N1029-10A, N2029-10A, N0029-10FX, N0029-FXN Trim Ring Black

BOM NS2039-EX N1039-10A, N2039-10A, N0039-10FX, N0039-10FXN Screen N/A

BOM NT7039-OFF-W 1039, 2039 Trim Ring Off White

BOM NS7039-BK Sewn Screen for 1039-10A Screen N/A

BOM NT2039-BLK N1039-10A, N2039-10A, N0039-10FX, N0039-10FXN, N0639-10FX Trim Ring Black

BOM NT2039-OFF-W N1039-10A, N2039-10A, N0039-10FX, N0039-10FXN, N0639-10FX Trim Ring Off White

BOM NS2049-EX 1049-10AX, 2049-AX Screen N/A

BOM NT2049-BLK N1049-10A, N2049-10A, N0049-10FX, N0049-10FXN Trim Ring Black

BOM NT2049-OFF-W N1070-10A, N2070-10A, N1070-10P, N2670-10AX Trim Ring Off White

BOM NS2070-EX N1070-10A, N2070-10A Screen N/A

BOM NT2070-BLK 1070-10A Trim Ring Black

BOM NT2070-OFF-W N1070-10A, N2070-10A Trim Ring Off White

BOM GT966-1 GT966 Trim Ring Black

BOM GT966-6 GT966 Trim Ring Off White

Beckson Opening Portlights

These "Rain Drain" portlights will self-drain while tipped at angles, up to 45o. The frame and nishing ring are made of high impact ABS plastic. Stainless steel hardware holds the Lexan window in place. Comes complete with bug screen.

Portlight # Screen # Gasket # Opening Cutout Outside Size

BEC PO410DWC-20 BEC SCR 410 BEC GK-410 4" x 10" 4-1/2" x 10-1/2" 6-3/4" x 12-3/4"




BEC PO8RD-WC-20 - BEC GK-8RD 8" round 8-1/2" 10-3/4"

PO410DWC-20

Parts:BEC LNZ-414C Clear lens 4” x 14"

Beckson Rain ShieldThe external rain shield may be fastened by screws or by bonding to the exterior trim ring of opening ports. This will keep out rain, spray and provide shade.

Projection from mounting surface is 2-1/2” (6.3 cm) •Vertical dimension of hood overall, 3” (7.6 cm)•Overall length: 16-3/4"•Under hood length: 14-1/2"•Use with 4" x 14" & 7" x 14" portlights •

BEC RS14

278

EXTERIO

R H

AR

DW

AR

E

Freeman Hatches

Round Hatches - Lift-OutEdge seal: Compression•All Aluminum•

Flush, round hatch ideal for quick access to valves and pipes, shaft alleys, void spaces, or sh sorting. The three dog mechanism ensures proper sealing tension.

Part # Clear Opening Deck Cut Overall

FRE 8A 7.9" 10.3” 9.8”

FRE 12A 11.9" 14.8” 17.4”

FRE 15A 15” 17.8” 21.5”

FRE 18A 18” 20.9” 24.5”

Hinged HatchesEdge seal: Compression•All aluminum •

Same features as Freeman lift out hatches. The unique hinging device allows the hatch to be opened more than 180° and it " oats" when the hatch is closed to facilitate a tighter seal.

Part # Shape Clear Opening Deck Cut Overall

FRE 18H/A Round 18” 20.9” 24.5

FRE 1524H/A Oval 14.6” x 23.5” 17.4 x 26.5” 21.6” x 30.5”

FRE 9813-2004 Gasket material, 24 x 24FRE 9801-2007 Model 20 gasketFRE 0211-2005 Regular arm for model 18FRE CAM Cam buttonFRE 0031-2001 Bushing w/ sleeveFRE 0031-2064 Inside escape handle alum.FRE 0031-2077 Aluminum actuator with pinFRE 0411-2004 S/S knurled pin 1/4" x 2-1/4"

Freeman Hatch Replacement Parts

FRE 1524A-RING 15 x 24 aluminum ring onlyFRE 1524S-RING 15 x 24 steel ring onlyFRE 18A-RING Model 18 Aluminum ring onlyFRE 1926S-RING 19x26 steel ringFRE 9801-2003 Gasket material, 12 x 18FRE 9801-2004 Model 15 gasket materialFRE 9801-2005 Gasket material, 15 x 24FRE 0211-2004 Regular arm for F/1524A hatchFRE 9813-2001 Gasket material, 19 x 26

Compression Sealing MethodCompression Seal Series Hatches have easy-to-clean spigots,

feature long gasket life, and are economical to purchase. Aluminum Deck Rings are intended to be weld installed into aluminum decks and bolt installed into other deck materials.

Steel Deck Rings are to be weld installed into steel decks only. Watertight seal intermittent to 30 foot head, continuous 10 foot head top-loaded pressure (on properly installed and adjusted

hatch assemblies). Knife Edge Sealing Series

Knife Edge Seal Series Hatches feature a coaming with drain gutter and an aggressive sealing rim edge

A drain tting can be installed to minimize water from entering enclosure when hatch is initially opened

Freeman Aluminum HatchesOval & Square Hatches - Lift-OutFreeman oval and square lift out aluminum or steel hatches are speci ed and used on all types of vessels (tugs, shing boats, research vessels, rescue craft and barges). These hatches are ideal for full-size access to void spaces, storage areas or lazarettes and for sh sorting or emergency escapes. A unique, ush handle design linked to a positive four dog mechanism ensures a secure seal. Special, corrosion resistant, high strength marine alloys combined with stainless steel, delrin and chloroprene are used to build hatches that withstand torturous treatment.

Guaranteed watertight to 30 feet of head•Fast acting, ush, quarter turn handles•Evenly spaced, positive locking dogs exert uniform pressure•

Part # Ring Edge Seal Clear Opening Deck Cut Overall Cover O.D.

FRE 1218A Aluminum Compression 12" x 18" 15" x 21" 18.8" x 24.8" 14.1" x 20.3"

FRE 1524A Aluminum Compression 14.6" x 23.4" 17.6" x 26.5" 21.3" x 30.3” 16.3" x 25.9"

FRE 1524S Steel Compression 14.6" x 23.4" 17.4" x 26.5" 17.4" x 26.5" 16.3" x 25.9"

FRE 1926A Aluminum Compression 19.1" x 26" 21.8" x 28.6" 25.3" x 32" 20.9" x 27.9"

FRE 2020A Aluminum Knife Edge 20" x 20" 22.5" x 22.5" 26.4" x 26.4” 21.9" x 21.9"

FRE 2424A Aluminum Knife Edge 24.5" x 24.5" 27" x 27" 31" x 31" 26.4" x 26.4"

EXTERIO

R H

AR

DW

AR

E279Oceanair Shades

Oceanair Surface SkyscreenIt features a unique heat re ecting blind and ultraviolet protected yscreen - providing complete below deck privacy or bug free ventilation. Unique black out blind and

yscreen cassette ts all main brands of hatch and is designed to clear trim moldings.

The easy t solution for all budgets•Ease of installation on the surface of the headlining, •ideal for retro tIdeal hatch solution for boats with thin decks, and soft, •or no headliningSoft-edged, low-pro le design•Can be retro- tted to existing hatch trim surrounds, •providing the trim is less than 12mmWide range of standard sizes •Optional trim and liner systems resolve all throughdeck •engineering challengesFully serviceable •

Part # ColourScreenL x W

OverallW

Lewmar

OCE SFSS-60-W White 20" x 20" 24-1/4" x 25-1/2"

OCE SFSS-60-B Beige 20" x 20" 24-1/4" x 25-1/2"

Lewmar w/ PVC Screen

OCE SFSSL-20-B Beige 13-5/8" x 8" -

OCE SFSSL-20-W White 13-5/8" x 8" -

OCE SFSSL-30-W White 18" x 12-7/8" -

OCE SFSSL-44-W White 17-3/8" x 17-3/8" -

OCE SFSSL-60-W White 20" x 20" 24-1/4" x 25-1/2"

Bomar

OCE SFSS-1039-W White 20-1/4" x 20-1/4" 24-1/2" x 25-3/4"

OCE SFSS-1039-B Beige 20-1/4" x 20-1/4" 24-1/2" x 25-3/4"

OCE SFSS-1049-W White 25-1/8" x 25-1/8" 29-3/8" x 30-5/8"

OCE SFSS-1049-B Beige 25-1/8" x 25-1/8" 29-3/8" x 30-5/8"

Taylor

OCE SFSS-12/12-B Beige 12" x 12" N/A

OCE SFSS-12/12-W White 12" x 12" N/A

OCE SFSS-20/20-W White 20" x 20" N/A

A PVC liner and clip are required for proper installing.

OCE SL-2.5"-LINER-JOINTOCE SL-4"-LINER-JOINT

Oceanair PortShadeA roller blind in an ultra slim cassette, designed to provide all the bene ts of a blind for even the smallest portlights. This blind may be mounted on horizontal or vertical surfaces adjacent to the portlight. The cassette is made of anodized aluminum and utilizes a unique heat re ective blind fabric to give maximum protection from sunlight. Manufactured in standard sizes to t most portlights.

Part # ColourScreenL x W

OverallW

OCE PSH-1-W White 11" x 13-3/8" 15-1/8"

OCE PSH-2-B Beige 11" x 15" 16-5/8"

OCE PSH-2-W White 11" x 15" 16-5/8"

OCE PSH-3-B Beige 12-5/8" x 18-1/8" 19-3/4"

OCE PSH-3-W White 12-5/8" x 18-1/8" 19-3/4"

Comes with all the necessary ttings and screws.

Oceanair RailShade

The ideal roller blind for general use and makes a cost-effective choice for hatches and larger windows. RAILshade has a sleek, silver-anodized cassette and may be ordered in two sizes.

Part # Screen L x W Overall W

OCE RSH-1-SA 14-1/8" x 15-3/4" 15-5/8"

OCE RSH-2-SA 18-1/2" x 20-1/8" 20"

Oceanair PleatedShade

Simple and quick to install in any boat interior, they are self adjusting for height and nonparallel use. Stylish and practical for any interior.

Part # Colour L x W

OCE PLS-1-CR Beige 12" x 15"

OCE PLS-1-N Navy 12" x 15"









► NOTE: Custom Sizes Available - Ask For a Quote

280

EXTERIO

R H

AR

DW

AR

E

Hatch Adjusters

BennettHatch Lifter Retro t SystemsLift virtually any size hatch at the push of a button. These single hydraulic cylinders deliver 250 pounds of vertical lifting capability and easily retro t to existing Bennett trim tab hydraulic power units. The Hatch Lifter shares the trim tab Hydraulic Power Unit. When the hatch is closed, system components are out of view. Relief valve allows hatch to be lifted manually in case of power failure. Cylinder is constructed of black anodized aluminum with a stainless steel rod. Kits come complete with cylinder, rocker switch, manifold, hardware, tubing, and ttings.

Stroke: 24" x Closed: 29-3/8"•BEN HL-1000-24"

Lenco Electric Hatch Lifts

Lenco hatch lifts are made entirely of non-corrosive materials and are completely submersible. Inline motor design makes mounting easier and delivers over 750 lbs. of lift. Clutchless ball screw design always runs in sync on dual lift applications and never binds. Stainless steel ram locks in any position. Ballscrew spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors. Motor draws 5 amps @ 12 volts. Lifts install with a single power cable.

Part # LOA Retracted Stroke LOA Extended

LEN HL-800 25" 8" 33"

LEN HL-1200 29" 12" 41"

LEN HL-1200S 25" 12" 37"

LEN 50015-001 Stud upper bracket

LEN 50014-001 Stud lower bracket

Perko Portlight ChainStainless steel chain with chrome plated

ttings. Use #8 screws.

Total length: 7”•Strap length: 1-7/8”•

PER 441-DP-CHR

Beckson Twist KnobsMolded plastic twist knobs. Available with a threaded male stud or with a female threaded ferrule.

Part # Knob Colour

BEC PRT-AB 1/4 - 20 Male Black

BEC PRT-B 1/4 - 20 Female Black

BEC PRT-W 1/4 - 20 Female White

BEC PRT-2B 1/4 - 20 Male Black

BEC PRT-CB 5/16 - 16 Male Black

Beckson Cam LatchesRetro- t your old Beckson hatches. Cam latches enable the hatch to be opened or closed with a single ip. Stronger than knobs or levers. White.BEC PRK-AW Complete assemblyBEC PRK-W Cam latch only

EXTERIO

R H

AR

DW

AR

E281Gas Springs

Attwood Springlift Gas SpringsNitrogen lled gas springs provide an excellent solution for opening hinged panels and various other products. Doors, lids and windows can be raised and kept open with assistance, yet can be smoothly and easily closed. Various mounting brackets and fastening devices make installation quick and simple. Attwood's black rod nish is 6-8 times more corrosion resistant than chrome.

Part #Length

Open-ClosedEnd

FittingPressure

lbs.

ATT SL1-20#-5 10" - 7" Blade 20

ATT SL1-40#-5 10" - 7" Blade 40

ATT SL3-60#-5 20" - 12" Blade 60

ATT SL3-110#-1 20" - 12" Blade 110

ATT SL27-100#-1 28" - 16.5" Socket 100

ATT SL27-120#-1 28" - 16.5" Socket 120

ATT SL29-80#-1* 36.3" - 21.10" Socket 80

ATT SL30-20#-5 10" - 7" Socket 20

ATT SL30-40#-5 10" - 7" Socket 40

ATT SL30-60#-5 10" - 7" Socket 60

ATT SL31-20#-5 5.25" - 7.5" Socket 20

ATT SL31-30#-5 5.25" - 7.5" Socket 30

ATT SL33-20#-5 15" - 9.5" Socket 20

ATT SL33-40#-5 15" - 9.5" Socket 45

ATT SL33-60#-5 15" - 9.5" Socket 60

ATT SL34-20#-5 20" - 12" Socket 20

ATT SL34-30#-5 20" - 12" Socket 30

ATT SL34-40#-5 20" - 12" Socket 40

ATT SL34-60#-5 20" - 12" Socket 60

ATT SL34-80#-5 20" - 12" Socket 80

ATT SL34-120#-5 20" - 12" Socket 120

ATT SL35-40#-5 12" - 8.46" Socket 40

ATT SL35-50#-5 12" - 8.46" Socket 50

ATT SL36-40#-5 17" - 10" Socket 40

ATT SL36-90#-5 17" - 10" Socket 90

ATT SL38-60#-1 23" - 13" Socket 60

*Requires a 13mm ball # ATT SL-62SS-BS-1

Part # Style Mount Holes

ATT SL-50B-P3-7 900 Ball 10mm 2

ATT SL-3HB-P3-7 Flat Ball 10mm 3

ATT SL-81-1 Cir-clip

Bracket OptionsBlack painted nish

Attwood Stainless Steel Gas SpringsA line of stainless steel gas springs that offer more durability. The pressure tube and rod are super-tough #316 stainless steel alloy. All other exposed components are stainless steel or marine-grade composite.

8 mm Rod x 18 mm Cylinder•

Socket End

Choice of Pem Attachment Points and Finish SpringLift mounting brackets are available with Blade Pem or Ball rem gas spring attachment points and a choice of materials and nishes, including zinc plated steel with black painted

nish or stainless steel.

Part #Length

Open-ClosedEnd

FittingPressure

lbs.

ATT SS30-40#-5 10" - 7" Socket 40

ATT SS33-20#-5 15" - 9.5" Socket 20

ATT SS33-40#-5 15" - 9.5" Socket 45

ATT SS34-20#-5 20" - 12" Socket 20

ATT SS34-30#-5 20" - 12" Socket 30

ATT SS34-40#-5 20" - 12" Socket 40

ATT SS34-60#-5 20" - 12" Socket 60

ATT SS34-80#-5 20" - 12" Socket 80

ATT SS34-120#-5 20" - 12" Socket 120

ATT SS36-40#-5 17" - 10" Socket 40

Part # Style Mount Holes Finish

ATT SL-40SS-P3-7 Flat Ball 10mm 2 S/S

ATT SL-46SS-P3-7 900 Ball 10mm 5 S/S

ATT SL-46SS-P3R-1 900 Rev Ball 5 S/S



ATT SL-62SS-BS-1 Flat Ball 13mm 4 S/S

ATT SL-69SS-BS-1 Stud* Ball 10mm - S/S

*9/16" Shank Length

Packaging OptionsParts ending in -7 are retail packaged by the pairParts ending in -5 are retail packaged by the each

Parts ending in -1 are sold in Bulk

282

EXTERIO

R H

AR

DW

AR

E

Hatch Adjusters

TH Marine Lid & Hatch SupportA 5/8" diameter, 12" long spring that requires four #8 FH screws for mounting. Designed to support 20lbs. maximum. It includes an internal S/S cable to prevent over extension on heavy lids.THM HS-1C-DP

Lamp Stainless Steel Flap StaysSatin nish 18-8 S/S•Requires 4 #8 FH fasteners•

LMP HS-180 8-17/16"LMP HS-210 9-29/64"

Lamp Stainless Spring Loaded Lid Stays

Self opening and closing •Satin nish 18-8 S/S•

Part # Length Open Closed

LMP LK-222 8-47/64" 6-25/32"

LMP LK-380 14-31/32" 11-1/32"

Sea-Dog Hatch Adjusters

Stamped S/S and nylon construction •With nylon locking nut•

Part # A B C D

SED 321291-1 11-1/8" 17-7/8" 1-3/8" 1-3/16"

SED 321292-1 14-3/16" 24-3/16" 1-3/8" 1-3/16"

Sea-Dog Side Vent Adjuster

Injection molded nylon push nut retainer nut with washer, stainless steel pin.SED 324380-1

Sea-Dog Hatch Adjusters

Stamped S/S and nylon construction•With easy grip locking sleeve•

Part # A B C D

SED 321295-1 11-15/16" 17-7/8" 1-3/8" 1-3/16"

SED 321296-1 14-15/16" 24" 1-3/8" 1-3/16"

Perko Hatch AdjusterChrome plated brass and zinc. Black plastic knob.

Arm length: 10"•Adjustment: 9-1/2"•Slide length: 10"•Uses #8 fastener•

PER 797-DP-CHR

Perko Windshield AdjusterChrome plated zinc. Black plastic knob. Sold in pairs.

Length: 12"•Adjustment: 9-1/2"•Knob diameter: 1-3/4"•Uses #8 fastener•

PER 1290-DP-CHR Side mount

Perko Windshield AdjustersChrome plated brass and zinc. Black plastic knob.

Uses #8 fastener•PER 1116-DP1-CHR 8"PER 1116-DP2-CHR 10"PER 1117-DP-BLK Spare knob for 1116,1179,1180

Perko Windshield Adjusters

Black plastic knob •Chrome plated brass and zinc•Outside tube diameter: 1/2"•Uses #6 fastener•

Part # Closed Open

PER 1179-DP1-CHR 10" 18"

PER 1179-DP2-CHR 12" 20"

Perko Windshield AdjusterChrome plated brass and zinc. Black plastic knob.

Outside tube diameter: 1/2"•Length closed: 12"•Length open: 21"•

PER 1180-DP-CHR

EXTERIO

R H

AR

DW

AR

E283Hatch Adjusters

Sea-Dog Windshield Brace KitFormed aluminum & injected molded nylon construction. Includes two windshield brace feet and a 14-1/4” length of tube to be cut to size.SED 324310-1

Perko Hatch Support BracesChrome plated brass•Sold in pairs•Uses #8 fastener•

PER 762-DP2-CHR 12"PER 762-DP3-CHR 14"

Sea-Dog Hatch SpringFormed and stamped 304 S/S. An internal wire prevents the spring from being over extended.

Fastener: #10 RH•L: 10-1/8"•

SED 321670-1

Sea-Dog Hatch SpringsFormed and stamped 304 S/S. An internal wire prevents the spring from being over extended.

Fastener: #10 RH or 3/16" Pop rivet•L: 8-5/8"•

SED 321650 BulkSED 321650-1 Packaged

Sea-Dog Hatch SpringFormed and stamped 304 • S/S Fastener: #6 RH or 1/8" pop rivet•L: 9"•

SED 321660-1

Sea-Dog Hatch Spring

Formed 304 S/S, heavy duty spring that is ideal for larger hatches and dock boxes. Strong stainless steel spring with internal safety cable that prevents spring from being overextended during normal use. Heavy duty molded nylon pads on both ends.SED 321680-1

Notes

TACO MARINE LUMBERBUILD IT TO LAST…UV stabilized polymer sheet Excellent resistance to sun and saltwater

Won’t rot, delaminate or splinter Matte texture eliminates painting No special tools required: cuts, routes and shapes like wood

••

•••

TACO MAKES RUB RAIL REPLACEMENT EASY…

Flexible vinyl and semi rigid rub rail kits New semi-rigid rub rail kit w/flexible vinyl chrome insert - Enjoy the elegant look of stainless steel at a fraction of the cost Everything needed in one convenient boxNew easy-carry box

••

••

TACO RUB RAIL KIT

OP

TACO T-TOP

an anodized aluminum T-top with the look, strength and durability of a factory-installed top that assembles and installs without welding.

BOAT OWNERS CAN NOW HAVE…

Adjustable design fits most boats and consoles (up to 41"W) Accessory-ReadyTM T-top ring allows for easy installation &

removal of acessories Outrigger-Ready designed for 10-minute installation of Grand Slam 270 Outrigger mounts Adjustable, removable canvas available in choice of colors Ships and stores in flat UPS-compliant boxes

••

•

•

•

TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarine.com • TACOmarinene.com

NEW!

EXTERIO

R H

AR

DW

AR

E285Rub Rails / Molding

TACO Rub Rail EndsStainless steel type 304. Highly polished. 3/4" ts S11-4510P12 and 1" ts the S11-4650P12.

1/4" W x 12" L•TAC S11-2000P12 3/4"TAC S11-2001P12 1"

Sea-Dog Rub Strakes

Stamped 304 stainless steel, highly polished. Use #8 FH screws.Part # A B C D E

SED 055408-1 8" 5" N/A 1/4" 3/4"

SED 055412-1 12" 4-1/2" 4-1/2" 1/4" 3/4"

SED 055418-1 18" 7-1/2" 7-1/2" 1/4" 3/4"

SED 055424-1 12" 7-1/16" 7-1/16" 1/4" 3/4"

TACO Stainless Steel Rub StrakeStainless steel type 304. Highly polished.

1" H x 1/4" W x 24" L•TAC S11-1800P24

TACO Stainless Steel Rub RailHollow back, half oval, type 304 marine grade stainless steel. Drilled and countersunk on 6" Centres.

Length: 12'•Part # Height Gauge Fastener

TAC S11-4500P12 1/2" .062" #6

TAC S11-4511P12 3/4" .077" #8

TAC S11-4650P12 1" .077" #10

TAC S11-4670P12 1-1/4" .077" #10

A500375VEL12

A500304TAL12

TACO T Hatch Trim Molding

Anodized aluminum•Length: 12'•

TAC A500304TAL12TAC A500375VEL12TACO Stainless Steel Rub Rail

Solid back, half oval, type 304 marine grade stainless steel. Drilled and countersunk on 6" centres.

Length: 12'•Part # A B Fastener

TAC S11-450SP12 1/2" 5/32" #6

TAC S11-467SP12 1-1/4" 1/4" #12

TACO Universal Aluminum TrimAnodized aluminum•5/8"H x 1/4"W•Hole size: #5•Length: 12'•

TAC A500273TAL12D

TACO Exterior GutterAnodized aluminum•Hole size: #6•Length: 12'•

TAC A510149TAL12D

TACO Half OvalAnodized aluminum •Hole size: #6 •Length: 12'•

TAC A510102TAL12DTAC A510104TAL12D A510102TAL12D

A510104TAL12D

TACO Transom EdgeAnodized aluminum•Hole size: #5•Length: 12'•

TAC A500326TAL12DTAC A500328TAL12D

A500326TAL12D

A500328TAL12D

TACO MoldingAnodized aluminum•Hole size: #8•Length: 12'•

TAC A110151TAL12DTAC A110152TAL12D

A110151TAL12DA110152TAL12D

286

EXTERIO

R H

AR

DW

AR

E

Rub Rail / Moldings

Colortrym GuttersAnodized aluminum•Bottom lip to cover raw edge of •

breglassCountersunk for # 6 fastener on 6" •centres Length: 12'•

CTM 1880BDMAC

Colortrym Hatch MoldingsAnodized aluminum•Use for hatch cover trim •Not drilled•Length: 12'•

CTM 7365CTM 7395

Colortrym Screw-on OvalsAnodized aluminum•Countersunk for #6 fastener •on 6" centres Length: 12'•

CTM 1010BMACCTM 1666BMAC

Colortrym Edge FacingsAnodized aluminum•Countersunk for #4 fasteners on •6" centresLength: 12'•

CTM TM19 BACTM 3938 BMAC

TM-19BA

3938 BMAC

Colortrym Utility EdgingAnodized aluminum•Countersunk for #6 fastener on 6" •centres Length: 12'•

CTM 1937BMAC

TACO Aluminum Rub RailAnodized nish •Uses #8 fasteners•Length: 12'•

TAC A110347BLY12DInsert:

TAC V124155BKA BlackSold by the foot•

TACO Aluminum Rub RailAnodized aluminum•Use #8 fasteners•Length: 12'•

TAC A110638TAL12DInsert:


TACO Aluminum Rub RailAnodized nish •Length: 12' •

TAC A110317TAL12DInsert:


TACO Aluminum Rub RailAnodized aluminum •Use #8 fasteners•Length: 12'•

TAC A110342BLY12DInsert:


Anodized aluminum •Use #10 fasteners •Length: 12'•

TAC A120303BLY12DTAC A120305BLY12D

TACO Aluminum Rub Rail

Insert: TAC V120303BKA Black

Sold by the foot•

EXTERIO

R H

AR

DW

AR

E287TACO Rub Rails

RUB RAIL SELECTION TIPSHere is how to get started:

MEASURING YOUR BOAT1. Measure the length and beam 2. Add them together and multiply by two 3. This is the minimum length of rub rail required for your boat

RUB RAIL SELECTIONYou can replace your rub rail with a factory replacement style or a completely different look. Regardless of the material originally •installed by the builder of your boat, feel free to choose the material and style you desireIt is easier to install if you remember to choose a rub rail that is at least the same height as the original•Flexible vinyl rub rail is the easiest to bend and provides a cushioning effect when in use against normal bumps•Rigid vinyl and aluminum rub rail with exible vinyl inserts, last long and are easy to install in straight runs•Rigid vinyl rub rail with stainless steel overlap provides the best protection and the longest useful life•

TACO D.I.Y. Rub Rail KitsKits include:

Flexible vinyl rub rail •Insert•End caps (where applicable)•Screws, & installation guide•

TACO's vinyl extrusions incorporate prime virgin resins, U.V. inhibitors, plasticizers, fungicides, impact modi ers and other additives to ensure outstanding weatherability and performance.

TACO Semi-Rigid Vinyl KitComplete with:

50’ rub rail (V11-9795)•50’ insert (V12-4144)•End caps, screws and installation guide •Hard durometer creates rigid-like look •Continuous coil allows for one piece installation without seams •Tight radius bending can be made with little or no heating•

TAC V119795BBK50D2

TACO Flexible Rub Rail KitComplete with:

50' Black exible rub rail (V11-0809BKA50)•50' White insert (V12-0810WHA100)•2 ea. End caps (F90-0750BN)•100 ea. Stainless steel screws•

TAC V110809BWK502


50' Black exible rub rail •(V11-3426BKA50)50' Black insert (V12-0005BKA50)•2 ea. End caps (F90-0001BKN)•100 ea. Stainless steel screws•

TAC V113426BBK502


50' Black exible rub rail •(V11-0809BKA50)50' Black insert (V12-0003BKA50)•2 ea. End caps (F90-0001BKN)•100 ea. Stainless steel screws•

TAC V112423BBK502


50' Black exible rub rail (V11-3447BKA) •50' White insert (V12-0003WHA50).•2 ea. End caps (F90-0002BKN)•100 ea. Stainless steel screws•

TAC V113447BWK502

288

EXTERIO

R H

AR

DW

AR

E

TACO Rub Rails

TACO Work Boat Vinyl Rub RailHeavy duty work boat rub rail•White in colour•

20 foot lengthsTAC V210945WHA20

TACO Rigid Vinyl Rub Railw/ Flexible Insert

Colour and gloss levels matched•to gel coats Requires heat for radius forming•Cuts and drills like wood•Ideal for boats up to 25'•

TAC V219501WHC20D White, 20'

Insert:TAC V120303BKA Black, per foot

TACO Rigid Vinyl Rub Rail Designed for use without an insert •Provides good basic protection•Ideal for work boats•Sold as a straight length or •coiled in a box

20 foot lengthsTAC V213670BKA20 Black lengthTAC V213670BKA20D Black coiledTAC V213670WHA20D White coiled

End Cap:TAC F900001BKN Black, each

TACO Rigid Vinyl Rub Railsw/ Stainless Insert

Rigid vinyl rub rail with stainless •steel insert provides the ultimate in durability and eleganceIdeal for 20 to 40 foot boats•Sold by the each•

TAC V219613BKA20D Black, 20'

Insert:TAC S11-4511P12 S/S, 12'

TAC V219659BKA20D Black, 20'

Insert:TAC S11-4511P12 S/S, 12'

TACO Semi-Rigid Rub RailsOffers the appearance and durability of rigid rub rails with the •formability of exible rub rails Tight radius bending can be made with minimal heating•Continuous coils for one-piece installation without seams•

TAC V110899BKA Molding

Sold by the foot (100 foot lengths)

TAC V110899BKA100 Molding

Sold by the 100 foot lengthInsert:

TAC V120005BKA Black

TAC V110809BKA Molding, black

Sold by the foot (50 foot lengths)Inserts:

TAC V120810BKA BlackTAC V120810WHA White


Sold by the foot (100 foot lengths)Insert:











EXTERIO

R H

AR

DW

AR

E289Vinyl Trim / Weather Seal

TACO Flexible Vinyl Trim

Covers the un nished edge and follows any contour or radius. Flexible PVC trim with individual internal aluminum clips and gripping tongue. 25' lengths.TAC V30-1005B25-1 Trim 5/16" x 9/16" Black

TAC V30-1005W25-1 Trim 5/16" x 9/16" White

TAC V30-1008B25-1 Trim 1/4" x 1/2" Black






StanPro Edge ChannelStainless steel edge channel seals the opening between two windows of 3/16" or 1/4" thickness.

Each length is 8' long•STP 75000081

Permastik Foam GasketA premium quality closed-cell neoprene gasket. Excellent resistance to weather and moisture absorption, oil and grease resistant. Adhesive coated 1 mil Mylar backing which prevents stretching during application with subsequent creeping and weakening of bond.GSK CG5351/4x1/2 50' rollGSK CG5351/4x3/4 50' rollGSK CG5353/8x3/4 25' rollGSK CG5351/2x3/4 25' rollGSK CG5351/2x1.5 25' roll

LifeSafe Hatch TapeFor bedding in windows and deck

ttings. Also used as an anti-vibration and water seal for engine hatch covers, etc.

3/4” x 7 feet•LIF RE-3870

Designed to trim un nished edges of boats, such as inwales or coamings, grommets, edges of hatches and other exposed breglass or metal edges. It is designed for fast and permanent installation, without adhesives, on anges from 1/8" to 3/16" thick with a 3/4" minimum radius and with minimum clearance from the edge of 1/2".

Sold by the foot•STP 75000330 White, Steel insertSTP 75000334 Black, Steel insertSTP 75000346 White, Aluminum insertSTP 75000348 Black, Aluminum insert

StanPro Marine Quickedge Plastic Trim

TACO Weather SealWeather Seal is made of durable exible sponge rubber with a heavy duty self-adhesive backing. Use Weather Seal or Hatch Tape anywhere you need a weather tight compartment.Weather seal-sponge rubberTAC V30-0109B10-1 3/8"H x 5/8"W x 10'TAC V30-0202B10-1 1/2"H x 1/2"W x 10'TAC V30-1333B10-1 1/4"H x 3/8"W x 10'

Hatch Seal- medium density closed cell foamTAC V30-0744B8-2 1/8"H x 3/4"W x 8'TAC V30-0748B8-2 1/4"H x 3/4"W x 8'

Designed speci cally for marine use and made of nonmagnetic type 316 stainless steel. The glass slides easily on a heavy plastic strip over a felt cushion, which permits installation screws to be countersunk for proper clearance. The polypropylene pile fabric will not rot or mildew, is UV stabilized and moth proof. Each length is 8'.STP 75000118 Single exibleSTP 75000119 Single rigidSTP 75000120 Double rigid

StanPro Stainless Steel Sliding Window Channel

290

EXTERIO

R H

AR

DW

AR

E

Marine Cork / Starboard

Narrow deck plankSTZ 032.1000.8 1-1/2" x 3/8" x 75"

Margin deck plankSTZ 032.1000.0 3" x 3/8" x 75"

King / shing plankSTZ 032.1001.1 5" x 3/8" x 75"

Deck plankSTZ 032.1001.2 16" x 3/8" x 75"

Accessories:STZ SSONE290 290 ml, adhesive/sealant, blackSTZ SP9102 1000 ml, primer, breglass & metalsSTZ SPMAR 500 ml, marine primer, woodSTZ 032.0510.9 Litre binder, brown, 2 component

The weight of one m2 MARINEDECK 2000 EXTERIOR is approx. 5.5kg without adhesive, caulking material and top coat. The nished

weight per m2 including all materials is approx. 6.5kg

Stazo Marine Cork Marinedeck 2000 ExteriorThe result of advanced research and technology in synthetic marine ooring. The composition, being made of ACMEC (Agglomerated Composite Marinedeck Exterior Composition). ACMEC is a registered trade mark and being manufactured by STAZO marine equipment.

A very special production method together with the synthetic binder enables us to manufacture MARINEDECK 2000 EXTERIOR. The planks, primers, adhesive and deck caulking material being prescribed, incorporate the same component elements to ensure complete compatibility.

The nished product has proven to exceed expectations, resisting exposure to natural elements and most chemicals. MARINEDECK 2000 has stood the test of time in most extreme conditions, proving wear resistant and nearly maintenance free.

Standard deck plankSTZ 032.1000.9 2" x 3/8" x 75"

Sea water resistanceTested for sea water resistance including extended periods with continuously changing temperatures, immersed in sea water with a very high salt content.

UV resistanceTested in both practice and in climate rooms.

All weather resistanceProven not to be effected by temperatures from -40 to +45C0

Strong and exibleBounces back after a short while if abused and can be easily repaired.

MaintenanceSimply wash when dirty with a normal household cleaner. Cleaning also prevents dirt from accumulating.

TACO StarBoard Lumber SheetsMarine Lumber will not rot, de-laminate, swell or splinter, and the matte texture requires no painting, nishing or maintenance. It can be easily cut, routed, shaped and drilled with standard woodworking tools.

TAC P102512WHA27 1/4" x 12" x 27" White

TAC P102524WHA27 1/4" x 24" x 27" White

TAC P105012BLK27 1/2" x 12" x 27" Black

TAC P105012WHA27 1/2" x 12" x 27" White

TAC P105024WHA27 1/2" x 24" x 27" White

TAC P105024WHA54 1/2" x 24" x 54" White

TACP107524WHA54 3/4" x 24" x 54" White

Project Ideas:Bait boards • Sink covers • Trim •Tables • Counter tops •Back splash • Transom door•Instrument panels•Ladder treads • Hatches & doors•

Documents

EXTERIOR HARDWARE 233 - AQUA SERVICES · EXTERIOR HARDWARE 233 Wipers & Accessories Wipers 234 - 239 Windshield Wash Systems 240 Cleats, Chocks & Deck Pipes 241 - 245 Deck Fills 246