Download pdf - e -Tender enquiry form (Free of cost)...1 Re e-Tender enquiry form for the supply of ESIC MEDICAL/SURGICAL INSTRUMENTS e -Tender enquiry form (Free of cost) Employees’ State Insurance

1

Re e-Tender enquiry form for the supply of

ESIC MEDICAL/SURGICAL INSTRUMENTS

e -Tender enquiry form (Free of cost)

Employees’ State Insurance Corporation Medical

College Hospital

SANATHNAGAR, Hyderabad – 38

ISO 9001:2008 certified E-mail: [email protected], [email protected] Phone No: 040-23701096, 23814852

LAST DATE OF SUBMISSION OF ONLINE e-TENDER Dt: 18-09-2019 at 2-30pm

mailto:[email protected]


shall be rejected

ESIC MEDICAL COLLEGE & HOSPITAL

SANATH NAGAR, HYDERABAD-38.

[email protected] , [email protected]

Phone no.- 040-23701096, 23814852

Tender No: 799-U/16/19/SURGICAL INSTRUMENTS/2018-19 Dated: 27-08-2019

Sub: Invitation of e-Tender for the supply of Medical equipments

E-TENDER NOTICE No.21/2019-20

e-Tenders in Two bid system are invited from manufacturers / authorized dealers / distributors for the supply of medical equipments for the

department of General Surgery, Detailed information regarding the items, application / tender forms, EMD details, specifications, terms and

conditions can be downloaded from the following websites: www.esic.nic.in

The interested bidders shall submit their tender(s) through online mode at the e-procurement portal

https://etenders.gov.in/eprocure/app

https://eprocure.gov.in/eprocure/app

All the bidders are requested to participate the tenders online through the website https://etenders.gov.in/eprocure/app /EMD

should be submitted by the bidder in the form of DD and the same should reach this office before the closing time of the tender.

No need of submitting the hard copy of the bid.

Any corrigendum to this tender will be notified through the aforesaid websites only.

The undersigned reserves the right to accept or reject any or all the bids without assigning any reason at any stage.

The schedule for different activities is as below:

S.No. Description /Name of the Dept. Schedule

I E-Tender document available at ESIC website / e-

procurement portal


https://eprocure.gov.in/eprocure/app

27.08.19, 14.30 onwards

II Last date and time for submission of completed Tender

forms through on-line& for the receipt of

EMD

18.09.19 Till 14.30

III Date of pre bid conference(Offline) 04.09.2019, 14.30

IV Date and Time for Opening of Technical Bids 19.09.19, 14.30

V Estimated contract value(Rs) 1500000/-

VI EMD 30000/-

VII Performance Security 10% of contract value

VIII Validity of the bid 365 Days from the opening of the

bid

For any clarifications contact through mail id : [email protected]

If the date of opening of tender happens to be a holiday, the tender will be opened on the next working day.

For Dean





shall be rejected

TENDER DOCUMENT

The Dean, ESIC Medical College, Hospital, Sanathnagar, Hyderabad, invites e-tenders from eligible and qualified Bidders for the supply of Medical equipments proposed to use for ESIC Medical College & Hospital, Sanathnagar, Hyderabad.

EMD

1. Bidder has to submit the Earnest Money Deposit (EMD) in the form of demand draft drawn in favor of “ESI saving Fund Account No. I” payable at Hyderabad, along with the Undertaking letter on 100 rupees non judicial stamp paper(Annexure II)

2. Separate EMD and Undertaking letter has to be submitted for each quoted item.

3. It is not mandatory for the bidder to quote all the items in the tender.

4. The EMD should reach this office through register post/courier/Speed post before the closing time of the tender

5. Please mention the tender enquiry number on the envelope and equipment name on the back side of the Demand draft.

6. All Tenders must be accompanied by EMD as mentioned above.

7. Bids without EMD and Undertaking letter shall be rejected.

4

EMPLOYEES’ STATE INSURANCE CORPORATION

MEDICAL COLLEGE &HOSPITAL

SANATH NAGAR, HYDERABAD-38.

[email protected] Phone no.- 040-23701096, 23814852

Tender No: 799-U-16/19/ SURGICAL INSTRUMENTS /2018-19 Dated: 27-08-2019

Sub: Invitation of Tender for MEDICAL/SURGICAL INSTRUMENTS– Reg.

The Dean, ESIC Medical College & Hospital, Sanathnagar,Hyderabad-38, invites

e- tender in Double Bid system for procurement of MEDICAL / SURGICAL

INSTRUMENTS as per the specifications enclosed.

Bidders are requested to submit the requisite information / documents as per the following

annexures:-

Annexure – I (Compulsory documents or check list) Annexure – II (Forwarding of tender documents) Annexure –III (Tender Terms and Conditions) Annexure – IV (Company Profile) Annexure – V (Declaration Form) Annexure – VI (Request for refund of EMD) Annexure – VII (LIST OF QUOTED ITEMS) Annexure – VIII (VIGILANCE DECLARATION FORM) Annexure – IX (Price Bid) Annexure – X (Specifications)

For DEAN


5

ANNEXURE – I

COMPULSORY DOCUMENTS (OR) CHECK LIST

A Compulsory documents for Technical Bid :

S.No. Title Status (Fill Yes or No)

Page no.(all

documents to

be serially

numbered by

the bidder)

1. Have you enclosed EMD of required amount for the

quoted schedules?

Please mention value of EMD &Date of issue from

Bank.

2. Have you Submitted tender document downloaded

from ESIC website and signed & seal in all

pages?(BLANK TENDER DOCUMENT TO BE UPLOADED)

3. Have you submitted tender specific manufacturer’s

authorization

4. Have you submitted The certificate of incorporation/Firm Registration, if a

firm / Valid trade license if a trader.

5. PAN Number of the firm/Partner/ owner as the case

may be

6. GST Registration certificate.

7. Have you furnished IT return with Balance Sheet and

Profit & Loss Account for last three years prior to the

date of Tender opening?

8. Have you accepted all terms and conditions of tender

document?(ON COMPANY LETTER HEAD)

9. Purchase Order copies of last three years prior to the

date of Tender opening, in the bidders name for the

quoted items to Government Hospitals/reputed

institutions

10. Satisfactory Performance of last three years of similar

nature, supply of similar products to the hospitals of

central government/State

government/PSU/Autonomous Bodies/Local Bodies

etc.

11. Have you submitted the List of quoted items separately (Proforma given at annexure-VII)

12. Certificate that the quoted items have not been supplied

to any other organization/institution at a rate lower than

quoted here in last three months

13. Have you submitted the vigilance declaration form

(ANNEXURE VIII)

B. Compulsory documents for Price Bid: (Fill Yes or No) (or) check list

1 Price Bid for the quoting items (ANNEXURE IX)

2 Price Catalogue for all the quoted items

6

ANNEXURE - II

tender for the supply of MEDICAL/SURGICAL INSTRUMENTS

REQUIRED FOR USE IN ESIC MEDICAL COLLEGE & HOSPITAL, SANATHNAGAR,HYDERABAD

To

The Dean,

ESIC Medical College&

Hospital, Sanathnagar,

Hyderabad-38.

Sir,

Sub: Forwarding of Tender document for MEDICAL/SURGICAL INSTRUMENTS for - Reg.

*

*

*

We have pleasure in submitting our tender for: MEDICAL/SURGICAL INSTRUMENTS We enclose herewith a Demand Draft No. Dt. for Rs.

Drawn in favour of the ESI saving Fund account No.-I, Payable at Hyderabad towards

Earnest Money Deposit.

We bind ourselves to the conditions prescribed in the Tender Notification.

We agree to have the Earnest Money forfeited in case of failure in full or part to

undertake the contract upon the acceptance of this tender.

OFFICE SEAL: SIGNATURE:

DESIGNATION:

NAME

&ADDRESS:

Date………, Time ...... ” and Should Be Sent By Registered Post/ In Person to This Office.

7

ANNEXURE – III

TENDER TERMS AND CONDITIONS

1. Tenders will be opened at MS/DMS/I/c STORES Chamber at ESIC Medical College & Hospital, Sanathnagar, Hyderabad-38, on the stipulated date and time.

2. The two part bids i.e. Techno - commercial (Unpriced Bid) and Price bid prepared by the Bidder shall comprise of the following:

3. Techno - commercial Bid (Unpriced Bid) Bidders should submit the documents as per the checklist A mentioned in Annexure-I

4. Price Bid Bidders should submit the documents as per the checklist B mentioned in Annexure-I

5. Rates should be typed in words as well as in figures, free from erasing, cutting and

Overwriting.

6. Price quoted should match with the items quoted in techno - commercial bid.

7. In case the price quoted cannot be matched with the items/quoted in technical bid, the bid

shall be liable to be rejected.

8. The quoted price should be all inclusive lump sum price offered for each item including cost

of the individual item and GST.

9. The rates quoted should be for ESIC Medical College Hospital, Sanathnagar, Hyderabad.

10. No other charges in addition will be payable on any account over and above the lump sum

price quoted in the price bid.

11. Only Techno - commercial bid (un-priced bid) will be opened first on the date mentioned.

The price bid of the firm who are technically viable fulfilling the specifications and all

other conditions alone, will be considered for evaluation

12. If it is found at any stage that the goods as stated have been supplied at a lower price, Then

that price, with due allowance for elapsed time will be applicable to the present case and

the difference in cost would be refunded by the supplier to the purchaser, if the contract

has already been concluded.

13. Tender currencies: The tenderer supplying goods shall quote only in Indian Rupees.

14. Bid Security (EMD) : Each tender must be accompanied by a EMD in the form of Demand

Draft only drawn in favour of ESI saving Fund account no.-I, payable at Hyderabad. The tenders not accompanied by EMD are liable for rejection. For EMD exemption, if any necessary documents for exemption should be submitted, otherwise tender will be liable for rejection. Advance Stamp Receipt for the refund of EMD should be enclosed with the tender document. The EMD of unsuccessful Tenderers shall be refunded after the award of tender to the successful tenderer. The Envelope Containing EMD Should Be Superscribed “EMD For Tender No…………….., Dt………… For “Supply Of …………………………..” Last

the scheduled date, the order in respect of the quantity not supplied is liable to be

8

15. The manufacturers or their authorized distributor/stockist would be considered for the tender.

16. The contract should not be sublet without the prior written permission of the Dean/Medical Superintendent.

17. Either the authorized Indian agent on behalf of the principal/OEM or principal/OEM himself can bid but both cannot bid simultaneously for the same item/product in the same tender.

18. If an agent submits bid on behalf of the principal/OEM, the same agent shall not submit a bid on behalf of another principal/OEM in the same tender for same item/product.

19. Successful bidder shall not be entitled to any rate revision of price for any reason except That allowed by Government of India.

20. Copies of Purchase Order for having supplied the quoted item to Government Hospitals/reputed institutions should be enclosed. The rates quoted in the purchase order should not be deleted or made illegible. A certificate duly authenticated satisfactory performance should also be enclosed.

21. Tenderer should be able to provide demonstration of the product quoted by them, to the Technical Evaluation Committee in Sanathnagar, Hyderabad, within the stipulated period. The date for demonstration shall be fixed with mutual consent on telephone/e-mail and the same shall be confirmed in writing or by fax. In any case, not more than two weeks time shall be given to arrange for demonstration.

22. The bidders/manufacturer/OEM will get only one chance for demonstration. In case, the company fails to arrange the demonstration the tender shall be liable for cancellation.

23. The successful bidder should furnish Performance Security Deposit @ 10% of the value of

the contract.

24. The Dean ESIC Medical College & Hospital, Sanathnagar, Hyderabad will be at liberty to terminate the tender proceedings without assigning any reasons thereof. The bidder will not be entitled for any compensation whatsoever in respect of such termination.

25. No articles shall be supplied to the hospital except on requisition in writing signed by competent authority in writing to do so.

26. Bidders in their own interest shall ascertain the eligibility of whatsoever concessions and exemptions are eligible and applicable to the ESIC Medical College & Hospital, Sanathnagar, Hyderabad and shall advise the purchaser and quote accordingly.

27. Delivery Schedule: Within 04 weeks from the date of dispatch of supply order. The

delivery should be at the place shown by the receiving officer within the premises of the ESIC Medical College & Hospital, Sanathnagar , Hyderabad at the cost of the supplier. If the successful tenderer fails to execute the supply within the stipulated period, Penalty of 2% of the value of the order will be levied per week or a part of week will be recovered subject to maximum of 10 percent . Failure to execute the supply will lead to cancellation of supply Order and the Performance security will stand forfeited. If the items are not supplied by

9

Cancelled at the supplier’s risk and expenses. The additional expenditure if any, involved in procuring similar supplies from other sources shall, in that case is recoverable from the supplier from any amount payable or Security Deposit.

28. Part supply should be avoided as far as possible. In case of part supply of any items

mentioned in the supply order or either quantity/goods requisitioned, the supplier shall

mention specifically when the balance will be supplied but supply all items so left out

should be made, in any case not later than 04 weeks from the date of despatch of

P.O, failing which the portion not supplied will be deemed to have been cancelled, and shall

be treated as failure to supply.

29. Bills for part supply shall not normally be admitted for payment. Bills normally shall be

preferred only after executing the supply order in full. The items should be delivered at the

Hospital Stores Department i.e. Door Delivery at Supplier’s Cost, before 2.00 PM on all

working days.

30. In case of failure of supply, the goods as per the supply order, the supply order shall be

placed either on the next lowest rate supplier/bidder or any other sources available

and difference of price will be recovered from the supplier either from the Security

deposit or from any sum due to him.

31. The supplier shall attach the certificate of Quality testing of items while supplying ESIC

Medical College & Hospital, sanathnagar, Hyderabad. Reserves the right to test any of the

items supplied. All rejected items shall be lifted by the supplier at his own cost. The supplier

should mention the brand name for the price they have quoted, to supply.

32. The supplier shall enter into a contractual agreement with the purchaser and the

cost incurred in this connection shall be borne by the supplier.

33. Mode of Payment: The payment towards the supply is subject to receipt of inspection note/performance certificate to the effect that the items supplied are conforming to the supply order placed. Bills for the supplies should be submitted along with the supplies but in any case not later than 7 days from the date of supply. The stamped pre-receipted bill in triplicate in the name of Dean, ESIC Medical College & Hospital, sanathnagar, Hyderabad shall be submitted to the hospital along with a copy of the receipt showing delivery of goods ordered, obtained from him. Order No. & date shall appear in all correspondence, delivery challans and invoices. Bills shall be prepared in whole rupees i.e. (fraction of Rupee below 50 Ps. to be ignored and 50Ps. above be rounded to the next higher rupee).

34. Termination for Default: The purchaser may, without prejudice to any other remedy for breach of contract, terminate the Contract in whole or part by giving a written notice of default to the supplier, if the supplier fails to deliver within the period specified in the contract, or within any extension thereof granted by the purchaser.

In the event of the purchaser terminating the contract in whole or in part, the purchaser may procure upon such items and in such manner as it deems appropriate, the goods similar to those undelivered, and the supplier shall be liable to the purchaser for any excess costs for such similar goods. However the supplier shall continue the performance of the contract to the extend not terminated.

If the selected firm holder defaults in supply or makes part supply/non supply the items more than three times during the contract period the purchaser can terminate the contract and purchaser can also black list the supplier from the further participation in any ESI tenders.

10

35. Resolution of Disputes The purchaser and the supplier shall make every effort to resolve amicably by

direct informal negotiation, any disagreement or dispute arising between them under or in connection with the Contract. If after 30 days from the commencement of such informal negotiations, the purchaser and the supplier have been unable to resolve amicably a contract dispute, either party may require that the dispute be referred for resolution in the formal mechanisms such as an arbitrator nominated by the Dean, ESIC Medical college & Hospital, sanathnagar, Hyderabad. The award of the arbitrator shall be final and binding on both parties of the contracts. The venue of the arbitration shall be such place as may be fixed by the arbitrator in his sole discretion. The Arbitration and conciliation act, 1996, the rules there under and any statutory modification or reenactments thereof shall apply to the arbitration proceeding.

36. Purchaser reserves the right to modify and/or relax any of the terms and conditions of the tender/contract.

37. This is a standard tender document, if anything not relevant to the tender may please be ignored.

38. If no tender with purchase order in the name of bidder is received, then those tenders with purchase orders in the name of manufacture or for same product to the GOVT hospital/institutions or reputed institutions will be considered in respect of S.No. 09 of the check list.

For DEAN

11

ANNEXURE – IV

COMPANY PROFILE

1 Name of the firm

2. Full Address:

3Telegraphic Address/E-mail Id:

4. Telephone No.

5. Telex/Fax No.

6. Date of Establishment of firm:

7. Is Your Firm registered under

a. The Factories Act

b. Companies Act

c. Any other Act

8. Name & address of your Bankers.

Stating the name in which the

Account stands

(Please give Account details)

11. Are you on the list of approved? Contractors of any other authority

(if so please give details)

12. Give details of any Govt. contract

Executed during the last 12 months

13. Are you a Manufacturer? If so

Please furnish the items you

Manufacture

14. Are you a small scale industry?

Registered with the appropriate

Authority. If so furnish details

15. Are your products certified by ISI?

If so furnish details

16. Any other information which you

Consider necessary to furnish

DATE SIGNATURE:

NAME & ADDRESS:

12

ANNEXURE – V

DECLARATION FORM

We ………..having our office at .............................. do declare that we have carefully read all

the terms &conditions of Tender for the supply of ...................................... and abide by all the

conditions set forth therein by the Dean, ESIC Medical College & Hospital, Sanathnagar ,

Hyderabad-38.

We further declare that we .………….possess valid licence bearing No… .......... valid

upto............

DATE:

SIGNATURE:

SEAL: NAME & ADDRESS:

13

ANNEXURE – VI From

To The Dean,

ESIC Medical College & Hospital Sanathnag ar , Hyderabad -38. Sub: Request for refund of EMD Amount – reg.

* * *

With reference to your advertisement dated _, we have submitted tender for

(tender name)……………………………..

In case we are not the successful bidder, we request you to kindly refund the EMD amount of Rs. ...............The Cheque may be kindly be drawn in favour of

Beneficiary’s Name :

Account No. :

A/C Savings

Current : IFSC

Code No. :

Bank Name :

Branch Name &

Address : Yours

faithfully, (SIGNATURE & SEAL)

PRE- RECEIPT

Received an amount of Rs…………………………… vide cheque No.......................... dated.................. from ESI Corporation towards refund of EMD amount.

RevenueStamp (SIGNATURE & SEAL)

14

ANNEXURE – VII (LIST OF QUOTED ITEMS)

S.NO ITEM NAME BRAND/MAKE

Signature of Bidder with date and seal

15

ANNEXURE – VIII VIGILANCE DECLARATION FORM

We declare that no central vigilance case is pending or existing on our firm name.

DATE: SIGNATURE:

SEAL: NAME & ADDRESS

16

ANNEXURE – IX

Price bid for the supply of MEDICAL/SURGICAL INSTRUMENTS

I/We hereby offer to supply MEDICAL/SURGICAL INSTRUMENTS at

Medical College & Hospital, Sanathnagar, Hyderabad-38 as per the specifications in the

Tender, at the rate given below.

S.

No.

Item Description Rate Per

Unit (Rs.)

Taxes, if Applicable (in

Rs.)

Total Amount (Rs.)

01

Buyer

Vendor

Vendor Rate Per Unit +

Taxes

* In case the taxes not specified, quoted rate considered as inclusive of taxes.

* The L1 will be selected by comparing the rates along with taxes.

Signature of Bidder with date and seal

17

ANNEXURE-X

LIST OF MEDICAL/SURGICAL INSTRUMENTS

S.No DEPT INSTRUMENT

NAME

SPECIFICATION/CO NTAINS REQ

UIRE

D

QTY

1 Paediatrics OTOSCOPE WITH HALOGEN

BULB, RECHARGEABLE -

BATTERY AND SIEGLE

ATTACHMENT

1. LONG LASTING, DURABLE

3.5 V DIAGNOSTIC

OTOSCOPE

2. HALOGEN BULB 3. 3.5 V

RECHARGEABLE HANDLE

4. BATTERY CHARGER

5. INSUFFLATOR BULB

WITH TIP 6. SPECULA

01No

2

Finger pulse oxymeter

1. Pulse Oxymeter, line

Powered:A mains electricity

(AC-powered) photoelectric

device intended for the

continuous transcutaneous

measurement and display of

haemoglobin oxygen

saturation (SpO2).

The signals,

typically produced

by light-emitting

diodes (LEDs) and a

receiving detector

in a probe,

or

directly built-in, are used

to

make the

measurements using the principle of

02

No.s

18

spectrophotomet ry. The

oximeter displays the SpO2

values

and may

calculate /

display other parameters, e.g.,

pulse rate,

electrocardiogra m (ECG).

The device is

typically used at the bedside."

2. SpO2

measurement range at

least 40-70 and 70 to

99 %, minimum

gradation 1%

3. Accuracy of SpO2 better than

± 1% for range 40-70 and

better than ± 3% for range 70-

99.

4. Pulse rate range at least 30 to

240 bpm, minimum

gradation 1 bpm

5. Accuracy of pulse rate better

than ± 5 bpm

6. Signal strength or quality to

be visually displayed

7. Audiovisual alarms required:

high and low SpO2 and

pulse rate (operator

variable settings), sensor

disconnected,se nsor failure,

low battery 8. Display type-

19

9. Memory-

Minimum 24hrs

trend memory

for Spo2&PR

10. User's interface-

Easily

accessible touch

button to

operate machine

11. Inbuilt Software

and/or standard

of

communication

12. Protective

splashproof case

for clean storage

and safe

transport

13. Display must

allow easy

viewing in all

ambient light

levels

14. Heat

Dissipiation:

Should maitain

nominal Temp

and the heat

should be

disbursed

through a

exhaust cooling

fan

15. power input and

frequency-220-

240v,50Hz

16. Power cable

length (meter)-

3mtr

17. Electrical

protection

provided by

fuses in both

live and neutral

supply lines.

18. "Operating

condition:Capab

le of operating

20

continuously in

ambient

temperature of 0

to 50 deg C and

relative

humidity of 15

to 90% in ideal

circumstances.

circumstances"

19. "STANDARDS

AND

SAFETY:Shoul

d be FDA / CE

approved

product ISO

80601-2-61-

2011: Medical

Electrical

equipment- part

2-61: Particular

requirements for

the basic safety

snd essential

performance of

pulse oxymeter.

Electrical safety

conforms to

standards for

electrical safety

IEC-60601-1,

EMC safety

confirms to IEC

60601-1-2

standard

requirement;

Manufacturer /

supplier should

have ISO 13485

certificate for

quality standard

Electrical safety

conforms to

standards for

electrical safety

IEC-60601-1

Shall meet IEC-

60601-1-2

(General

requirements for

21

safety - electromagnetic

compatibility)

and IEC 60601-

2-25 (essential

performance of

electrocardiogra

phs

20. Warranty-3

years warranty

and one year

with free

servicing

21. Others: List of

important spare

parts and

accessories with

their part

number and

costing.

Certificate of

Callibration and

Inspection to be

provided.

3 TUNING FORK TO TEST HEARING 32-

10000 CAPS (SETS-128,256, 512,1024HZ)

A TUNING FORK IS

AN ACOUSTIC

RESONATOR IN THE

FORM OF A TWO

PRONGED FORK

WITH THE ROUND

BASE.

EACH SET SHOULD

CONSIST OF 128, 256,

512HZ

01

22

4 Table top baby weighing Machiine 1. Handling –

portable

2. Display type-

LED

3. REadaptability-

5gm

4. Capacity-20kg

5. Pan Size-

550mmX330m

m

6. Response Time-

3 Secs

7. Power

Required-90-

250V,50/60Hz,1

0Watt

8. Operating

Temp:10-

45degree

Celsius

9. Noi.Of

Displays:Single

10. Material of

Platform:Plastic

11. Shape of

Platform:Rectan

gular

12. Weighing

Machine

Dimensions-

300X400mm

13. Weight of

Weighing

machine:5Kg

14. Internal

Calibration-Yes

15. N.of Recording

features-Yes

16. No.of Scale

Divison:10000

17. Power

Requirement:ma

ins

operated/Battery

Operated

18. Battery Back

UP-Yes

19. Battery Back up

time-10hrs

01

23

20. Alarm for

overload and

malfunctioning-

Yes

21. Model approval

Certificate-Yes

24

5 Digital Weighing Machine Weigh upto 100kg

LED Display

Internal Calibration

Automatic tare

provision

02No. s

6 Height scale Stainless steel 01No

7 B.P Apparatus LED Non Mercury

04No. s

8 Digital B.P Apparatus 02No. s

9 Ambu Bags 500ml-2

635ml-2

04No.

s

10 Rebreathing Marks Small-01

Medium-01

Stainless steel

02No.

s

11 EyE O.T Calibri forceps Stainless steel 20

12 Hydro dissection cannula Stainless steel 50

13 Screw speculum Stainless steel 30

14 Harskins Stainless steel 30

15 Vannas straight|curved Stainless steel Stainless steel 20

16 Small artery forceps Stainless steel 10

17 Small scissors Stainless steel 10

18 Bialers Stainless steel 30

19 Towel clips Stainless steel 20

20 Conjunctival scissors Stainless steel 10

21 Surgery

O.T&Orth

o O.T

Dressing set Stainless steel 25

22 Suture removal set Stainless steel 10

23 Suturing set Stainless steel 04

24 Post Natal

Ward

Suction apparatus Stainless steel 10

25 Height scale Stainless steel 02

26 Chittle foreceps Stainless steel 06

27 Chittle forceps holder bottle Stainless steel 06

28 Kidney trays Stainless steel 10

25

29 Thumb forceps Stainless steel 20

30 Bowl small Stainless steel 20

31 Suture removal scissor Stainless steel 20

32 Plastic

Surgery

Double approximator without frame 11

mm,for veins (ABB-22V)

German Chrome

Steel.Corrosion

Resistant.High Quality

And High durability

02

33 Double approximator without frame 17mm

for veins (ABB-33V)

German Chrome

Steel.Corrosion


And High durability

02

34 Microvascular single clamp 11mm for

veins(B-2V)

German Chrome

Steel.Corrosion


And High durability

02

35 Microvascular single clamp 17mmfor

veins(B-3V)

German Chrome

Steel.Corrosion


And High durability

02

36 Approximator for vessel size 1.5-

3.5mm(HD-D)

German Chrome

Steel.Corrosion


And High durability

02

37 Approximator foe vessel size 1.5-3.5mm

single

German Chrome

Steel.Corrosion


And High durability

02

38 Clamp applying forceps 14 cm German Chrome

Steel.Corrosion

Resistant.High Quality And High durability

02

39 HUMBY’s knife-skin grafting handle

complete,32 cm

German Chrome

Steel.Corrosion


And High durability

02

40 Operating

scissors,BL/BL,STRAIGHT,16cm

German Chrome

Steel.Corrosion


02

41 Dissecting scissors BL/BL,curved,15cm German Chrome

Steel.Corrosion


And High durability

02

42 Dissecting scissors,fine,curved,18cm German Chrome

Steel.Corrosion


02

43 Scissors,Reynolds,curved,10.5cm German Chrome 02

26

Steel.Corrosion


And High durability

44 Iris scissors,SH/SH,curved,10.5 cm German Chrome

Steel.Corrosion


And High durability

02

45 Strabismus scissors ,BL/BL,straight,12cm German Chrome

Steel.Corrosion


And High durability

02

46 Tissue ndissecting scissors,fine,curved20cm German Chrome

Steel.Corrosion


02

47 Dressing foreceps ,medium

wide,curved,13cm

German Chrome

Steel.Corrosion


And High durability

02

48 Tissue forceps,adsons1x2t,12cm German Chrome

Steel.Corrosion


And High durability

04

49 Micro adsons foreceps 1x2t,12cm German Chrome

Steel.Corrosion


02

50 Micro mosquito foreceps,straight,12cm German Chrome

Steel.Corrosion


And High durability

06

51 Micro mosquito foreceps,curved,12cm German Chrome

Steel.Corrosion


And High durability

08

52 Hooklet, mimi-langenbeck,12x6mm,16 cm German Chrome

Steel.Corrosion


04

53 Retracter,kocher-lang25x6mm,21.5cm German Chrome

Steel.Corrosion


And High durability

04

54 Needle holder mayo-hegar,14-15cm German Chrome

Steel.Corrosion


And High durability

02

55 Needle holder,Webster,13cm German Chrome Steel.Corrosion

02

27


And High durability

56 Needle holder,crilewood 15cm German Chrome

Steel.Corrosion


And High durability

02

57 Needleholder ,microvascular,18cm German Chrome

Steel.Corrosion


And High durability

02

58 Skin hooket,gills,no.1,18cm German Chrome

Steel.Corrosion


04

59 Skin hooket ,joseph,2-pair,7mm,16cm German Chrome

Steel.Corrosion


And High durability

02

60 NST-red-FCPS,straight,SH,0.3,17cm German Chrome

Steel.Corrosion


And High durability

02

61 Dissecting scissors,curved,18cm German Chrome

Steel.Corrosion


02

62 Disseting scissors,fine,curved,18cm German Chrome

Steel.Corrosion


And High durability

02

63 Scissors ,Reynolds,curved,15cm German Chrome

Steel.Corrosion


And High durability

02

64 Scissors,Reynolds,curved,15 cm German Chrome

Steel.Corrosion


And High durability

02

65 Dressing forceps,Waugh,20cm German Chrome

Steel.Corrosion


And High durability

02

66 Dissecting forceps ,adson,1x2T,15 cm German Chrome

Steel.Corrosion


02

67 Dissecting forceps ,semkem,1x2t,13cm German Chrome

Steel.Corrosion


02

28

And High durability

68 Tying forceps ,w,platue,0.3mm,12cm German Chrome

Steel.Corrosion


And High durability

02

69 Suction tube ,3.0m,20cm German Chrome

Steel.Corrosion


And High durability

04

70 Suction tube ,3.0.20cm German Chrome

Steel.Corrosion


And High durability

04

71 Suction tube 4.0mm.20cm German Chrome

Steel.Corrosion


And High durability

04

72 Needle holder,de bakey,1.5mm,20 cm German Chrome

Steel.Corrosion


02

73 Needle holder,de bakey,20cm German Chrome

Steel.Corrosion


And High durability

02

74 Artery forceps ,de bakey,1.5mm,20cm German Chrome

Steel.Corrosion


And High durability

02

75 Caliper ,castrov-schach,curved.0-20mm German Chrome

Steel.Corrosion


And High durability

02

76 Mouth gag,dingman,complete German Chrome

Steel.Corrosion


And High durability

02

77 Palatal rasparatary,curved,L4mm,14cm German Chrome

Steel.Corrosion


And High durability

02

78 Palatal rasparatory, curved.R4mm,14 cm German Chrome

Steel.Corrosion


02

79 Gracey curette1/2:yellow German Chrome

Steel.Corrosion


And High durability

02

9


Steel.Corrosion


And High durability

02


Steel.Corrosion


And High durability

02

82 Tenotomy scissorsBL/BL,straight,11cm German Chrome

Steel.Corrosion


And High durability

02

83 Tenotomy scissors BL/BL,curved,11cm German Chrome

Steel.Corrosion


And High durability

02

84 Retractor., kohler-lang55x11mm,22cm German Chrome

Steel.Corrosion


And High durability

04

85 Retracter.,kohler-lang80x13mm,22cm German Chrome

Steel.Corrosion


04

86 Woundspreader,alm,blunt,4x4t.,7cm German Chrome

Steel.Corrosion


And High durability

02

87 Woundspreader,ALM,sharp,2x3T.,11cm German Chrome

Steel.Corrosion


And High durability

02

88 Woundspreader,ALM,blunt,3x4.,13cm German Chrome

Steel.Corrosion


And High durability

02

89 Wire cutting and bending forceps,15cm German Chrome

Steel.Corrosion


And High durability

02

90 Bone rongeur,borhler,curved15cm German Chrome

Steel.Corrosion


And High durability

02

91 Bone rongeur,jansen,S-shape,18cm German Chrome

Steel.Corrosion


And High durability

02

92 Bone cutting forceps,liston,curved20cm German Chrome 02 2

30

Steel.Corrosion


And High durability

93 Dura hooked,graham,curved.,BL16cm German Chrome

Steel.Corrosion


And High durability

02

94 Coding label,MS1,W/O text,W/O hole German Chrome

Steel.Corrosion


And High durability

02

95 Micro scissors,straight sh/sh 12cm German Chrome

Steel.Corrosion


02

96 Micro scissors, straight., 0.3mm.11cm German Chrome

Steel.Corrosion


And High durability

02

97 Micro forceps,straight,0.3mm.11cm German Chrome

Steel.Corrosion


And High durability

02

98 Dilating forceps,10degree,5x0.2mm,11cm German Chrome

Steel.Corrosion


02

99 Dilating forceps,10degree,5x0.3mm,11cm German Chrome

Steel.Corrosion


And High durability

02

100 Needle holder barraquer straight 10-11cm German Chrome

Steel.Corrosion


And High durability

02

101 Micro needle holder ,curved.,w/o lock 10-12

cm

German Chrome

Steel.Corrosion


02

102 Micro needle holder ,straight.,w/o lock 10-

12cm

German Chrome

Steel.Corrosion


And High durability

02

103 Artery forceps,De bakey, 1.5mm,16cm German Chrome

Steel.Corrosion


And High durability

02

104 Artery forceps ,De bakey,1.5mm,20cm German Chrome Steel.Corrosion

02

31


And High durability

105 MESH TRAY German Chrome

Steel.Corrosion


And High durability

02

106 Microstop minimist container appox

300x180x100mm

German Chrome

Steel.Corrosion


And High durability

02

107 Logistic frame, red Fcontainer German Chrome

Steel.Corrosion


02

108 Orthopedi

c Ward

Surgical scissors Stainless steel 08

109 Artery forceps Medium Stainless steel 12

110 Artery forceps Small Stainless steel 06

111 Dissecting forceps toothed Stainless steel 12

112 Dissecting forceps non toothed Stainless steel 12

113 Needle holder Stainless steel 04

114 Clip removar Stainless steel 04

115 Torniquet Stainless steel 10

116 BP Handle size 11 Stainless steel 02

117 Needle destroyer Stainless steel 02