2 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Remarks
• The load capacities stated are valid for lifting operation only (corresponding with crane classifi-
cation according to ISO 4301-1, crane group A1).
• Machine is standing on firm, horizontal ground.
• The weight of the lifting device (pulley block, hoist ropes, shackles etc.) must be deducted from
the load capacity.
• Additional equipment on boom (e.g. walkways) must be deducted from the load capacity.
• The max. admissible wind speed can be preselected in the LML software and referred to in the
load chart.
• Working radii are measured from centre of swing ring and under load.
• The lifting capacities are valid for 360 degrees of swing.
• Calculation of stability under load is based on ISO 4305 Table 1 + 2 + 3, tipping angle 4°.
• The steel structures are calculated according to EN 13001-1; EN 13001-2.
• The last digits of the given dimensions are rounded to 0 and 5 and may differ from the actual
dimensions.
• Weights may vary depending on the delivered configuration of the machine, filling level of the
tanks as well as generally valid tolerances.
• The illustrations in this brochure may include options which are not within the standard scope
of supply of the machine.
Concept and characteristics 3
Technical description 6
Dimensions 8
Transport dimensions and weights 9
Self-assembly system 14
Boom combinations 16
Main boom 2018.xx 18
Luffing jib 1309.xx 20
Luffing jib 1713.xx 25
Fixed jib 1008.xx 30
Fixed jib 0806.xx 33
3LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Concept and characteristics
Main boom
Pulley block with additional weights
Undercarriage
A-frame
Rear counterweight
Pendants
Uppercarriage
4 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Storage compartment for tools
Ground pressure The actual ground pressure is calculated
according to the configuration and position of the machine and displayed in the operator’s cabin. Using the optional Liebherr Crane Planner the actual ground pressure can already be calculated and displayed in the planning stage.
High performance A strong, efficient and reliable diesel engine
of the newest generation provides high per-formance and enables several movements to be carried out simultaneously.
Cabin with high comfort Optimised field of vision combined with
enhanced comfort: an orthopaedic operator’s seat with heating and cooling functions, as well as precise and ergonomic controls are included.
Control Easy and intuitive handling of control, service
and machine functions through a large, clear colour monitor. Built for extreme environmen-tal conditions.
Additional safety platform
Crawler side frames with 1000 mm flat track pads
Carbody counterweight 10 t
Platforms
Ca bin with high comfort optimized view noise-reducing design orthopaedic seat
5LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Basic counterweight slab 12 t
Storage compartment for tools
Pulley set
Counterweight slab 5 t
Rear counterweight:
Efficient self-assembly system and short assembly times
The self-assembly system enables safe, independent and quick assembly/disassem-bly of the crawler side frames, the carbody and rear counterweights, as well as boom elements.
Mobility Crane parts are optimized for transportation.
The maximum transport width is 3 m.
Easy service The design ensures easy maintenance and
service as well as safe access to the com- ponents.
Boom A variety of boom systems and configurations
allow for optimum operation on the most diverse jobsites.
6 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Technical description
Hoisting gearStandard crane winches 1 + 2
internal low-maintenance planetary gearbox in oil bath, load support by the hydraulic system, spring–loaded, multi–disc holding brake, pres-sure controlled, variable flow hydraulic motors for the main winches, full utilisation of engine power as the winch speed is automatically adjusted to suit the respective line pull
Line pull in the 7th layer 120 kNRope diameter 26 mmDrum diameter 580 mmRope speed 0-136 m/minRope capacity in 7 layers 489 mOption – winch with free fall
free fall: clutch and braking functions are provided by the service brake (low wear and maintenance-free multi–disc brake in compact design)
Boom/jib luffing winchesMain boomLine pull max. 217 kNRope diameter 24 mmBoom luffing 15-86° in 119 sJibLine pull max. 105 kNRope diameter 20 mmJib luffing 15-78° in 46 s
ControlControl system includes all control and monitoring functions,
designed to withstand extreme environmental conditions and heavy construction tasks
Display high resolution monitor in the operator’s cabin, clear display of complete machine operating data, warnings and failure indications in the required language
Operation several movements can be performed simulta-neously thanks to electro-hydraulic proportional control, all categories of loads can be positioned with utmost precision
Swing gearDrive system with fixed axial piston hydraulic motors, planetary
gearbox, pinionSwing ring roller bearing with external teethBrake hydraulically released, spring–loaded multi–disc
holding brakeSwing speed 0-3 rpm continuously variableSpeed control both swing modes are possible – speed control
or free swing for speed control: a multi–disc holding brake locks automatically at zero swing motion.
Hydraulic systemHydraulic pumps double axial displacement pump in open loop hy-
draulic system allows all functions to be operated simultaneously automatic working pressure cut–off to minimize peak pressure
Hydraulic oil tank capacity
650 l
Max. working pressure 350 barHydraulic oil electronic monitoring of alle filters
use of synthetic environmentally friendly oil
Noise measurement data and vibrationNoise emission according to 2000/14/EC directiveEmission sound pressure level LPA
69.9 dB(A) (in the cabin)
Guaranteed sound power level LWA
105 dB(A) (of the machine)
Vibration transmitted to the machine operator
< 2.5 m/s2 (to the hand-arm system)< 0.5 m/s2 (to the whole body)
CrawlersDrive system with fixed axial piston hydraulic motorsCrawler side frames maintenance-free, with hydraulic chain tensioning
deviceBrake hydraulically released, spring–loaded multi–disc
holding brakeDrive speed 0-1.5 km/hFlat track pads width 1000 mm
Operating weightComposition of operating weight
basic machine with crawlers winches 1 + 2, A-frame 17 m main boom, consisting of boom foot (7 m), boom head (7 m) and boom section (6 m)62.3 t rear counterweight (10 × 5 t + 1 × 12 t + 0.3 t)20 t carbody counterweight (2 × 10 t)160 t pulley block
Total weight approx. 167 t
Diesel enginePower rating according to ISO 9249
230 kW (308 hp) at 1700 rpm
Engine type Liebherr D 944 A7-04Fuel tank capacity 790 l with continuous level indicator and
reserve warningExhaust certification 97/68 EC Stage IV; EPA/CARB Tier 4f
97/68 EC Stage V; EPA/CARB Tier 4fECE-R.96 Power Band Hnon-certified emission standard
7LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Operation modes
Lifting mode Grab mode Personnel lifting mode
Land
Floating structure(barge operation)
* only valid for jack-up barges
Optional equipmentBasic machineMain winches 12 t with free fallPainting in customer designLoad hook 12.5 / 40 / 80 / 100 / 160 tEconomy and ecologyEco-Silent PackageAux. power unit (APU, 2.8 kW)Boom/jibLuffing jib: luffing winchBoom/jib otherWalkway for main boom foot, incl. fall protectionWalkway for main boom head, incl. fall protectionRope guide for main boom walkway, incl. fall protectionAdditional fall protection harness for 1 personWalkways for main boom sections 3 / 6 / 12 mWalkways for main boom sections 3 / 6 / 12 m, incl. fall protectionApplication packagesOperation mode: personnel lifting (O)Operation mode: barge operation (O)Operation mode: foundation work (O)Operation mode: wind speed pre-selection (S)Operation mode: travelling with load (S)Winch synchronizationRadio remote controlRope reeving function via radio remote controlAssembly radio remote controlUse of luffing jib winch as auxiliary winchTagline winch 2 t free fallMain winch constant tension for one winchTwo hook operationSpecial featuresCrane Planner 2.0LiDATSelf-assembly systemJack-up system standard / telescopicSelf-assembly system counterweightSelf-assembly cylinderReeving winchTrack shifting hydraulic
Service packageRefuelling pump diesel / AdBlueCold package -25 °C / -40 °CHydraulic oil bypass filterCentral lubrication swing ring bearings / outsideLiebherr hydraulic oil plus (longlife & bio)Liebherr hydraulic oil plus arctic (longlife & bio)Liebherr hydraulic oil plus arctic (longlife)Safety featuresAssistance system: Boom Up-and-Down Aid Assistance system: Horizontal Load Path Assistance system: Vertical Line FinderAssistance system: Ground Pressure Indication and VisualizationRear and side view camerasWinch cameraZoom camera at boom headSafety upgrade APAVEPlatforms and railings on uppercarriage 570 mmAdditional access ladder for boom assemblyRailings on rooftop foldableRailings for cabin platformVandalism cabin protectionCabin protection roof, FOPS level 1Lifting height indication for both hoist winchesPlug&Play diesel-hydraulic back-up unit 18.4 kWSwing and boom radius limit deviceAircraft warning lightSwing warning lightLightning rodMechanical angle displayAir intake shut-off valveAccess controlOperator‘s comfortAdditional access ladderAdditional floodlightsCabin air conditionerCabin tilting device hydraulicGear oil level warningLitronic additional language
(S) standard, (O) option
8 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Dimensions
Basic machine with undercarriage
560
1470
1000
6050
6800
* Boom pivot point
8455 1265
1500*
R 7800
4055
1655
10165
3450
3610
7200
15335
6710
R 590
0
9LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Transport option 2018.xx / 1309.xx Transport option (No. 2018.xx/1309.xx)
No. 2018.xx / 1309.xx m 6 / 6 11.7 / 11.7Weight including pendants kg 1620 2860
2200
2070
Max. 11860
Transport dimensions and weights
Basic machine and main boom 2018.xx
12008455
1470 Crawler side frameWeight flat track pads 1000 mm kg 17498
Boom section 3 m (No. 2018.20)
Weight including boom pendants kg 707Weight including boom and jib pendants kg 771
3160 2200
2070
Boom section 11.7 m (No. 2018.20)
Weight including boom pendants kg 1691Weight including boom and jib pendants kg 1905
11860 2200
2070
Boom section 6 m (No. 2018.20)
Weight including boom pendants kg 1011Weight including boom and jib pendants kg 1121
2200
2070
6160
Boom foot 7 m (No. 2018.23)
Weight including winch kg 4067Weight without winch kg 2685
7270 2200
2250
Boom head 7 m (No. 2018.20)
Weight including boom pendants kg 2404
8000 2145
2820
Basic machineWeight without hoist rope kg 35000Weight of hoist ropes kg/m 3.4with A-frame 1, winches 1 + 2 (2x 120 kN), without boom foot, without rear counter-weight, without carbody counterweight and crawler side frames
10325
1425 (option)
3415
2985
3185
975
10 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Fixed jib 0806.xx
Jib section 6 m (No. 0806.15)
Weight including pendants kg 249
6120
905
930
6025 920
1155 Jib head 5.5 m (No. 0806.16)
Weight including pendants kg 442
3125
870
930
Jib section 3 m (No. 0806.15)
Weight including pendants kg 141
Jib foot 5.5 m with A-frame (No. 0806.16)
Weight including pendants kg 10772230
1240
56457100
Fixed jib 1008.xx
3140
1065
1095
Jib section 3 m (No. 1008.17)
Weight including pendants kg 267
Jib section 6 m (No. 1008.17)
Weight including pendants kg 4481065
10956140
Jib foot 5.5 m with A-frame (No. 1008.20)
Weight including pendants kg 2058
68705710 2135
2085
Jib head 5.5 m (No. 1008.20)
Weight including pendants kg 8736585 1095
1080
11LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Luffing jib 1713.xx
Jib section 3 m (No. 1713.18)
Weight including pendants kg 3943140 1805
1570
Jib section 6 m (No. 1713.18)
Weight including pendants kg 6246140 1805
1570
Jib section 12 m (No. 1713.18)
Weight including pendants kg 112212140 1805
1570
7760 1805
2140 Jib head 7 m (No. 1713.21)
Weight including pendants kg 1376
Jib foot 7 m with A-frames 2 + 3 (No. 1713.22)
Weight including pendants kg 4747
75758745
1835
3165
Luffing jib 1309.xx
6290 1395
2125 Jib head 5.5 m (No. 1309.22)
Weight including pendants kg 1127
Jib section 11.7 m (No. 1309.20)
Weight including pendants kg 941
11845 1395
1215
Jib section 6 m (No. 1309.20)
Weight including pendants kg 511
6145 1395
1215
Jib section 3 m (No. 1309.20)
Weight including pendants kg 307
3145 1395
1215
Jib foot 5.5 m with A-frames 2 + 3 (No. 1309.22)
Weight including pendants kg 4493
1875
3060
75958780
12 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Counterweight Basic counterweight slab without tie-down (1x)
Weight kg 120006050
640
1365
6050
1365
Counterweight slab (8x)Weight kg 5000
1905
480
1365
1905
1365
Carbody counterweight (2x)Weight kg 10000
3030 2110
875
3030
2110
13LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Pulley block with additional weights / load hooks 160 t pulley block – 7 pulleys
Width mm 885Weight kg 1500 / 2250 / 3000
2110
770
100 t pulley block – 5 pulleysWidth mm 745Weight kg 1300 / 1800 / 2300
1890
770
80 t pulley block – 3 pulleysWidth mm 565Weight kg 1000 / 1500 / 2000
1815
770
40 t pulley block – 1 pulleyWidth mm 490Weight kg 700 / 1100 / 1500
1625
770
1115
Ø 400 12.5 t load hook
Weight kg 600
14 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Self-assembly system
Unloading and assembly of crawler side frames
Unloading and assembly of rear counterweight
Unloading and assembly of boom foot
Unloading and assembly of carbody counterweight Unloading and assembly of boom
Unloading of basic machine
15LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Erecting of main boom and luffing jib
Assembly of boom
Reeving of hoist and luffing jib ropes
16 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Boom combinations
Main boomMode 1Max. length2018.xx m 87.5Further information on page 18.
7 m (2018.23)
3 m (2018.20)
6 m (2018.20)
6 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
7 m (2018.20)
Main boom + fixed jibMode 3Max. combination2018.xx1008.xx
mm
66.826
69.820
Total length m 92.8 89.8Further information on page 30.
7 m (2018.23)
6 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
7 m (2018.20)
5.5 m (1008.20)
5.5 m (1008.20)
3 m (1008.17)
6 m (1008.17)
6 m (1008.17)
Main boom + fixed jibMode 3Max. combination2018.xx0806.xx
mm
75.532
78.526
Total length m 107.5 104.5Further information on page 33.
7 m (2018.23)
11.7 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
7 m (2018.20)
5.5 m (0806.16)
3 m (0806.15)
6 m (0806.15)
6 m (0806.15)
6 m (0806.15)
5.5 m (0806.16)
Main boom2018.xx
Main boom2018.xx
Main boom2018.xx
Fixed jib1008.xx
Fixed jib0806.xx
17LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Main boom + luffing jibMode 4Max. combination2018.xx1713.xx
mm
52.183
55.168
Total length m 135.1 123.1Further information on page 25.
7 m (2018.23)
3 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
7 m (2018.20)
7 m (1713.22)
3 m (1713.18)
6 m (1713.18)
12 m (1713.18)
12 m (1713.18)
12 m (1713.18)
12 m (1713.18)
12 m (1713.18)
7 m (1713.21)
Main boom + luffing jibMode 4Max. combination2018.xx1309.xx
mm
55.178.5
58.166.8
Total length m 133.6 124.9Further information on page 20.
7 m (2018.23)
6 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
11.7 m (2018.20)
7 m (2018.20)
6 m (1309.20)
3 m (1309.20)
11.7 m (1309.20)
5.5 m (1309.22)
11.7 m (1309.20)
11.7 m (1309.20)
11.7 m (1309.20)
11.7 m (1309.20)
5.5 m (1309.22)
Luffing jib1713.xx
Luffing jib1309.xx
Main boom2018.xx
Main boom2018.xx
18 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Main boom 2018.xx
Main boom lengths 20-87.5 m
Main boom configuration 2018.xxBoom section Amount of boom sectionsBoom foot 7 m 1 1 1 1 1 1 1 1 1 1 1 1Boom section 3 m 1 1 1 1 1 1Boom section 6 m 1 1 1 1 1 1Boom section 11.7 m 1 1 1 1 2 2 2 2 3 3Boom head 7 m 1 1 1 1 1 1 1 1 1 1 1 1Boom length [m] 20 23 25.7 28.7 31.7 34.7 37.4 40.4 43.4 46.4 49.1 52.1Auxiliary jib
Boom foot 7 m 1 1 1 1 1 1 1 1 1 1 1 1Boom section 3 m 1 1 1 1 1 1Boom section 6 m 1 1 1 1 1 1 2 2Boom section 11.7 m 3 3 4 4 4 4 5 5 5 5 5 5Boom head 7 m 1 1 1 1 1 1 1 1 1 1 1 1Boom length [m] 55.1 58.1 60.8 63.8 66.8 69.8 72.5 75.5 78.5 81.5 84.5 87.5Auxiliary jib
1210-2000
36 t
Auxiliary jib 36 t (option)
The maximum capacity of the auxiliary jib is 36 t. The corresponding load chart is programmed in the LML system.
Units in m96
96 84 72 60 48 36 24 12 00
12
24
36
48
60
72
84
87.5
84.5
81.5
78.5
75.5
72.5
69.8
66.8
63.8
60.8
58.1
55.1
52.1
49.1
46.4
43.4
40.4
37.4
34.7
31.7
28.7
25.7
23.0
20.0
0°15
°20
°
30°
40°
50°
60°
70°80° 86°
19LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with main boom Load capacities in [t] with 62.3 t rear counterweight and 20 t carbody counterweight
Radi
us [m
]
Boom length [m]20 28.7 34.7 40.4 46.4 52.1 58.1 63.8 69.8 75.5 81.5 87.5
5 160.0* 136.3 126.46 137.0 131.2 122.9 104.8 86.47 122.6 115.1 111.0 98.9 82.7 69.5 58.0 46.78 111.6 102.0 95.8 89.4 78.9 66.4 56.0 46.3 37.9 31.69 97.0 89.0 84.2 79.7 72.1 63.7 53.8 44.5 36.8 31.3 26.0 21.910 84.9 78.9 75.0 71.5 66.5 59.9 51.5 43.3 35.7 30.4 25.3 21.711 73.8 70.8 67.5 64.6 61.7 56.7 48.9 41.1 34.8 29.7 24.6 21.012 65.2 64.2 61.3 58.9 56.4 54.2 46.7 39.0 33.4 28.9 24.1 20.513 58.3 58.3 56.1 54.0 51.8 49.8 44.9 37.2 32.3 28.1 23.4 20.114 52.6 52.6 51.7 49.8 47.8 46.1 42.7 35.8 31.2 27.3 22.7 19.416 43.9 43.9 43.8 43.0 41.4 40.0 37.7 32.6 29.4 26.1 21.4 18.118 37.5 37.5 37.3 37.2 36.4 35.2 33.8 29.5 27.0 24.7 20.5 17.120 32.5 32.6 32.4 32.3 32.0 31.3 30.1 27.2 25.0 23.3 19.3 16.222 28.7 28.6 28.4 28.1 27.9 27.0 25.2 23.4 22.1 18.3 15.324 25.6 25.4 25.3 25.0 24.8 24.4 23.3 21.9 21.1 17.4 14.526 23.0 22.8 22.7 22.4 22.2 21.9 21.4 20.4 19.8 16.7 13.928 20.7 20.6 20.5 20.2 20.0 19.7 19.4 18.8 18.1 15.8 13.330 18.7 18.6 18.3 18.1 17.8 17.6 17.2 16.5 14.9 12.732 17.1 17.0 16.7 16.5 16.2 15.9 15.6 15.2 14.0 12.234 15.7 15.6 15.3 15.1 14.8 14.5 14.2 13.9 13.2 11.636 14.3 14.1 13.9 13.5 13.3 13.0 12.7 12.1 11.238 13.2 13.0 12.8 12.4 12.2 11.9 11.6 11.2 10.440 12.2 12.0 11.8 11.5 11.3 10.9 10.7 10.3 9.642 11.1 10.9 10.6 10.4 10.1 9.8 9.4 8.844 10.3 10.1 9.8 9.6 9.3 9.0 8.6 8.146 9.6 9.4 9.1 8.8 8.5 8.2 7.9 7.448 8.7 8.4 8.2 7.9 7.6 7.2 6.850 8.1 7.8 7.6 7.3 7.0 6.6 6.355 6.5 6.3 5.9 5.7 5.3 5.060 5.1 4.8 4.6 4.2 3.965 3.9 3.6 3.3 3.070 2.8 2.5 2.275 2.1
* Load capacities over 137 t require a special heavy duty boom head.
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
20 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Luffing jib 1309.xx
Jib lengths 22.7-78.5 m
Jib configuration 1309.xxJib section Amount of jib sectionsJib foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1Jib section 3 m 1 1 1 1 1 1 1 1 1 1Jib section 6 m 1 1 1 1 1 1 1 1 1 1Jib section 11.7 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5Jib head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1Jib length [m] 22.7 25.7 28.7 31.7 34.4 37.4 40.4 43.4 46.1 49.1 52.1 55.1 57.8 60.8 63.8 66.8 69.5 72.5 75.5 78.5Auxiliary jib
For main boom configuration please refer to the table on page 18.
Auxiliary jib 12 t (option)
The maximum capacity of the auxiliary jib is 12 t.
1080-1770
12 t
Units in m
108 8496 72 60 48 36 24 12 00
12
24
36
48
60
72
84
96
108
120
132
144
60.8
58.1
55.1
52.1
49.1
46.4
43.4
40.4
37.4
34.7
31.7
28.7
25.7
78.5
75.5
72.5
69.5
66.8
63.8
60.8
57.8
55.1
52.1
49.1
46.1
43.4
40.4
37.4
34.4
31.7
28.7
25.7
22.7
0°
45°
55°
65°75° 83° 88°
0°15
°20
°
30°
40°
50°
60°
73° 78°
21LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with luffing jib Load capacities in [t] with 25.7 m main boom 88°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 72.5 78.5
8.6 47.413 37.6 20.816 28.6 19.3 10.718 24.1 18.5 10.2 7.820 20.5 16.8 9.8 7.4 5.222 17.6 15.4 9.3 7.2 5 3.626 12.6 8.7 6.7 4.7 3.336 8.6 7.2 5.9 4.1 2.744 5.7 5.3 3.6 2.455 4.1 3.6 2.8 2.060 3.1 2.365 2.5
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 40.4 m main boom 88°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 72.5 78.5
9.1 37.313 29.8 17.516 23.6 16.6 9.618 20.3 15.9 9.4 7.020 17.8 14.4 9.0 6.8 4.822 15.6 12.7 8.6 6.6 4.7 3.528 9.8 7.8 6.0 4.3 3.042 6.4 5.2 4.5 3.5 2.444 4.9 4.3 3.3 2.355 3.6 3.0 2.460 2.665 2.1
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 55.1 m main boom 88°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 72.5 78.5
9.6 26.214 20.7 14.018 16.0 12.4 8.120 14.4 11.6 7.8 5.9 3.822 12.9 10.3 7.5 5.7 3.7 3.024 11.9 9.3 7.3 5.6 3.6 2.926 11.0 8.6 6.9 5.4 3.5 2.828 7.9 6.4 5.3 3.4 2.738 6.0 4.7 4.1 3.0 2.344 4.0 3.3 2.5 2.046 3.7 3.1 2.355 2.9 2.3
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 58.1 m main boom 88°
Radi
us [m
]
Jib length [m]22.7 34.4 40.4 52.1 60.8 66.8
9.7 24.213 20.9 15.814 19.4 15.5 13.016 17.3 14.3 12.5 8.518 15.2 12.9 11.7 8.3 5.920 13.6 11.7 10.9 8.1 5.7 4.726 10.3 8.8 8.2 6.9 5.1 4.228 8.2 7.6 6.4 5.0 4.140 5.5 4.4 3.7 3.242 5.2 4.2 3.5 3.044 4.0 3.3 2.855 2.9 2.3
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
Load capacities in [t] with 60.8 m main boom 88°
Radi
us [m
]
Jib length [m]22.7 28.7 34.4 40.4 46.1 49.1
9.8 22.412 20.5 18.013 19.5 17.4 15.214 18.3 16.4 14.7 11.016 16.4 14.8 13.4 10.4 9.0 8.226 10.2 9.2 8.5 7.6 7.0 6.528 8.7 7.9 7.1 6.6 6.234 6.7 5.9 5.5 5.140 5.1 4.6 4.346 3.9 3.748 3.8 3.550 3.3
62.3 t rear counterweight and 20 t carbody counterweight
22 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with luffing jib Load capacities in [t] with 25.7 m main boom 83°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 72.5 78.5
12.8 44.118 32.4 18.924 19.2 16.5 9.326 17.1 15.7 9.0 6.828 12.1 14.6 8.7 6.6 4.730 13.8 8.5 6.5 4.5 3.240 9.6 7.4 5.8 4.0 2.746 6.7 5.4 3.6 2.455 5.4 4.8 3.2 2.160 4.3 2.9 2.065 3.6 2.770 2.2
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 40.4 m main boom 83°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 72.5 78.5
14.6 33.720 24.6 15.826 16.5 13.9 8.428 15.1 13.1 8.2 6.230 12.1 8.0 6.1 4.332 11.4 7.8 6.0 4.3 3.046 7.2 6.3 5.1 3.5 2.448 6.0 5.0 3.4 2.350 5.7 4.8 3.3 2.260 4.2 3.8 2.865 3.2 2.570 2.2
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 55.1 m main boom 83°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 72.5 78.5
16.4 21.322 16.7 12.026 14.0 10.8 7.330 12.1 9.8 7.1 5.432 9.1 6.9 5.3 3.534 8.6 6.7 5.2 3.4 2.748 5.9 4.9 4.2 2.8 2.150 4.6 4.1 2.8 2.155 4.0 3.4 2.660 3.5 2.9 2.165 2.570 2.1
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 58.1 m main boom 83°
Radi
us [m
]
Jib length [m]22.7 40.4 52.1 57.8 60.8 66.8
16.7 19.222 15.6 10.926 13.4 10.0 7.528 12.4 9.5 7.4 6.4 5.430 11.6 9.1 7.2 6.3 5.4 4.336 7.8 6.5 5.7 4.9 4.138 7.3 6.1 5.5 4.8 3.944 6.3 5.3 4.8 4.3 3.648 5.6 4.7 4.4 4.0 3.450 4.5 4.1 3.8 3.360 3.4 3.1 2.7 2.465 2.6 2.2
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
Load capacities in [t] with 60.8 m main boom 83°
Radi
us [m
]
Jib length [m]22.7 28.7 34.4 40.4 46.1 49.1
17.1 17.620 15.7 13.922 14.6 12.8 11.724 13.5 12.0 11.0 9.2 7.826 12.7 11.3 10.3 8.7 7.8 7.234 9.1 8.4 7.4 6.7 6.338 8.1 7.6 6.7 6.2 5.840 7.2 6.3 5.9 5.644 5.7 5.3 5.048 5.1 4.7 4.550 4.5 4.255 3.7
62.3 t rear counterweight and 20 t carbody counterweight
23LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with luffing jib Load capacities in [t] with 25.7 m main boom 75°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 72.5 78.5
19.2 24.028 21.8 16.734 14.1 8.438 12.4 8.0 6.140 11.6 7.8 6.042 10.9 7.6 5.8 4.044 10.3 7.5 5.7 3.9 2.650 6.8 5.4 3.6 2.455 6.3 5.1 3.4 2.265 4.5 2.970 4.0 2.775 2.4
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 40.4 m main boom 75°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 72.5 78.5
23.1 24.732 17.6 14.140 11.9 7.642 11.3 7.5 5.646 10.2 7.2 5.4 3.748 9.7 7.1 5.3 3.6 2.450 9.1 6.9 5.2 3.6 2.455 6.5 5.0 3.3 2.265 5.4 4.5 2.970 4.2 2.775 3.8 2.580 2.3
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 55.1 m main boom 75°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 66.8 72.5
26.9 15.136 12.4 9.238 12.1 8.842 8.2 6.146 7.6 5.8 4.5 4.048 7.4 5.7 4.4 4.0 2.955 6.7 5.1 4.1 3.7 2.860 4.7 3.9 3.5 2.765 4.4 3.6 3.2 2.570 4.0 3.3 3.0 2.375 3.0 2.7 2.080 2.4
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 58.1 m main boom 75°
Radi
us [m
]
Jib length [m]22.7 40.4 46.1 55.1 63.8 66.8
27.6 13.436 11.2 8.238 10.9 7.9 7.040 7.6 6.942 7.3 6.7 5.446 6.8 6.2 5.2 3.848 6.6 6.0 5.0 3.7 3.455 6.0 5.4 4.5 3.5 3.160 5.0 4.1 3.2 2.965 3.9 2.9 2.675 2.5 2.280 2.0
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
Load capacities in [t] with 60.8 m main boom 75°
Radi
us [m
]
Jib length [m]22.7 31.7 40.4 43.4 46.1 49.1
28.3 12.134 10.7 9.136 10.2 8.7 6.938 9.9 8.3 6.8 6.340 9.7 8.0 6.6 6.2 5.9 5.442 7.7 6.3 6.0 5.7 5.346 7.2 5.9 5.6 5.3 5.048 7.0 5.7 5.4 5.2 4.850 5.5 5.2 5.0 4.755 5.2 4.8 4.6 4.360 4.6 4.3 4.065 3.8
62.3 t rear counterweight and 20 t carbody counterweight
24 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with luffing jib Load capacities in [t] with 25.7 m main boom 65°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 72.5 78.5
26.8 21.838 13.546 10.7 7.548 10.1 7.450 9.5 7.255 6.7 5.360 6.2 5.1 3.3 2.265 5.6 4.9 3.1 2.070 4.5 2.975 4.0 2.780 2.5
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 40.4 m main boom 65°
Radi
us [m
]
Jib length [m]22.7 40.4 55.1 63.8 72.5 75.5
33 15.142 11.244 9.950 8.355 7.3 6.660 5.8 4.965 5.1 4.7 3.1 2.670 4.5 4.2 2.9 2.575 3.6 2.7 2.380 3.2 2.6 2.185 2.490 2.1
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 52.1 m main boom 65°
Radi
us [m
]
Jib length [m]22.7 31.7 43.4 57.8 63.8 69.5
38 11.242 9.944 9.3 8.846 8.8 8.348 7.950 7.5 6.755 6.5 5.960 5.3 4.365 4.6 3.8 3.4 3.170 3.4 3.0 2.675 2.9 2.6 2.280 2.6 2.2
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 55.1 m main boom 65°
Radi
us [m
]
Jib length [m]22.7 34.4 37.4 46.1 57.8 60.8
39.3 10.240 10.044 9.046 8.5 7.748 8.0 7.3 7.050 6.9 6.755 6.2 5.9 5.460 5.3 4.7 4.065 4.2 3.5 3.270 3.7 3.0 2.875 2.6 2.480 2.3 2.1
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
Load capacities in [t] with 58.1 m main boom 65°
Radi
us [m
]
Jib length [m]22.7 28.7 34.4 46.1 55.1 60.8
40.5 9.342 8.944 8.5 8.046 8.0 7.648 7.7 7.2 6.850 6.9 6.555 6.1 5.7 4.960 5.1 4.3 3.765 3.8 3.2 2.970 3.4 2.8 2.575 2.4 2.180 2.1
62.3 t rear counterweight and 20 t carbody counterweight
25LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Luffing jib 1713.xx
Jib lengths 20-83 m
Jib configuration 1713.xxJib section Amount of jib sectionsJib foot 7 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1Jib section 3 m 1 1 1 1 1 1 1 1 1 1 1Jib section 6 m 1 1 1 1 1 1 1 1 1 1 1 1Jib section 12 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5Jib head 7 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1Jib length [m] 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 74 77 80 83Auxiliary jib
For main boom configuration please refer to the table on page 18.
Auxiliary jib 12 t (option)
The maximum capacity of the auxiliary jib is 12 t.
1080-1770
12 t
Units in m
108 8496 72 60 48 36 24 12 00
12
24
36
48
60
72
84
96
108
120
132
144
0°
45°
55°
75° 83° 88°
65°
8380
7774
7168
6562
5956
5350
4744
4138
3532
2926
2320
0°15
°20
°
30°
40°
50°
60°
73° 78°
58.1
55.1
52.1
49.1
46.4
43.4
40.4
37.4
34.7
31.7
28.7
25.7
26 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with luffing jib Load capacities in [t] with 25.7 m main boom 88°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
8 59.212 41.8 34.814 34.3 31.1 22.718 24.1 21.9 19.9 14.520 20.4 18.6 17.6 13.9 9.622 17.1 16.2 15.4 12.7 9.1 6.524 14.3 13.3 11.7 8.8 6.332 9.7 9.0 7.8 7.0 5.538 7.0 5.9 5.3 4.546 5.2 4.2 3.6 3.150 3.5 3.0 2.355 2.9 2.2
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 37.4 m main boom 88°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
8.4 47.212 35.2 28.416 25.2 21.6 18.418 21.7 18.5 16.9 12.520 18.6 16.0 14.4 12.0 8.422 16.3 14.0 12.6 11.0 8.1 5.624 12.3 11.1 9.7 7.9 5.540 5.9 4.8 4.0 3.248 4.8 3.4 2.750 3.1 2.455 2.660 2.0
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 43.4 m main boom 88°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
8.6 40.212 31.5 24.916 22.5 19.5 16.518 19.7 17.0 15.0 11.420 17.3 14.8 12.9 10.9 7.722 15.2 13.2 11.5 10.0 7.5 5.134 7.7 6.5 5.6 4.7 3.940 5.2 4.4 3.6 2.744 4.6 3.8 2.9 2.246 4.3 3.4 2.650 2.9 2.255 2.4
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 52.1 m main boom 88°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
8.9 31.313 24.1 19.514 22.5 18.616 19.4 16.3 13.618 17.0 14.4 12.5 9.720 14.9 12.6 10.9 9.1 5.624 11.7 10.0 8.7 7.4 5.4 3.326 9.1 7.9 6.8 5.0 3.334 6.8 5.8 4.8 3.5 2.640 4.7 3.8 2.746 3.9 3.055 2.1
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
Load capacities in [t] with 58.1 m main boom 88°
Radi
us [m
]
Jib length [m]20 29 35 41 47 50
9.1 26.312 22.9 19.513 21.2 18.7 16.614 19.9 17.5 15.9 14.016 17.4 15.4 14.2 13.0 10.4 9.726 8.9 8.2 7.6 6.7 6.534 6.2 5.7 5.0 4.740 4.7 4.1 3.942 4.5 3.8 3.644 4.0 3.6 3.448 3.2 3.050 2.8 2.8
62.3 t rear counterweight and 20 t carbody counterweight
27LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with luffing jib Load capacities in [t] with 25.7 m main boom 83°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
12 51.718 31.5 29.320 26.3 26.0 20.224 19.0 19.9 18.5 12.926 17.3 16.6 12.628 15.4 15.2 12.2 8.532 12.5 12.3 11.1 8.1 5.738 9.6 9.3 8.9 7.4 5.048 6.1 5.6 5.4 4.355 4.0 3.9 3.460 3.2 2.9 2.865 2.1
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 37.4 m main boom 83°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
13.4 40.718 29.9 24.922 21.6 20.3 16.424 18.7 17.7 15.726 16.5 15.7 14.8 10.928 14.0 13.3 10.730 12.8 12.3 10.5 7.540 8.5 7.8 7.3 6.6 4.742 7.2 6.7 6.4 4.550 5.4 4.7 4.3 3.755 3.8 3.4 2.860 3.1 2.6 2.2
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 43.4 m main boom 83°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
14.1 34.020 23.6 20.222 20.2 18.424 17.7 16.3 13.926 16.0 14.7 13.0 10.230 12.0 11.1 9.5 7.034 10.2 9.3 8.4 6.7 4.642 7.1 6.8 6.1 5.7 4.248 5.5 4.8 4.3 3.855 3.6 3.0 2.560 2.9 2.365 2.2
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 52.1 m main boom 83°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
15.2 25.520 20.1 15.824 15.8 13.5 11.028 12.9 11.4 9.8 7.930 10.4 9.2 7.632 9.6 8.8 7.3 4.942 6.7 6.0 5.2 3.8 2.646 5.2 4.5 3.3 2.350 4.6 3.8 2.8 2.055 3.1 2.260 2.665 2.0
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
Load capacities in [t] with 58.1 m main boom 83°
Radi
us [m
]
Jib length [m]20 29 35 41 47 50
15.9 20.720 17.3 14.822 15.9 13.5 12.224 14.5 12.6 11.3 10.3 8.226 13.1 11.6 10.6 9.7 8.0 7.530 9.9 9.2 8.6 7.2 6.938 7.4 7.0 6.6 5.8 5.640 6.6 6.1 5.5 5.342 6.2 5.7 5.1 5.048 4.8 4.2 4.050 3.9 3.755 3.2 3.2
62.3 t rear counterweight and 20 t carbody counterweight
28 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with luffing jib Load capacities in [t] with 25.7 m main boom 75°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
18.1 24.026 23.7 23.030 18.3 16.636 13.8 12.7 11.540 11.9 11.1 9.9 7.644 9.3 8.3 7.146 8.7 7.7 6.8 4.955 5.9 5.6 5.0 4.360 4.8 4.2 3.565 3.9 3.5 2.970 2.9 2.475 2.2
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 37.4 m main boom 75°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
21.1 24.028 20.7 19.232 12.1 16.634 15.4 14.236 14.5 13.238 13.5 12.3 10.344 10.8 10.2 9.2 6.848 8.8 7.9 6.6 4.460 5.3 4.6 3.765 4.4 3.9 3.270 3.3 2.775 2.6 2.1
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 43.4 m main boom 75°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
22.7 24.530 18.5 16.136 13.6 11.538 12.8 10.940 12.1 10.5 8.642 11.4 9.9 8.546 9.8 9.0 7.8 6.050 8.0 7.1 5.7 3.960 5.4 4.7 3.565 4.5 4.0 3.170 3.5 3.3 2.775 2.7 2.2
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 52.1 m main boom 75°
Radi
us [m
]
Jib length [m]20 35 47 59 71 74
24.9 17.432 14.5 11.534 13.9 11.036 10.538 10.0 8.440 9.6 8.042 9.1 7.7 6.248 8.0 6.8 5.6 3.7 3.355 5.9 4.8 3.2 2.960 5.1 4.3 2.8 2.665 3.9 2.5 2.370 3.2 2.2
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
Load capacities in [t] with 58.1 m main boom 75°
Radi
us [m
]
Jib length [m]20 29 35 41 47 50
26.5 14.132 12.2 10.234 11.6 9.7 8.936 11.3 9.3 8.5 7.738 8.9 8.1 7.4 5.940 8.5 7.8 7.1 5.8 5.544 8.0 7.1 6.5 5.4 5.148 6.7 6.0 5.0 4.750 6.5 5.8 4.8 4.555 5.3 4.4 4.160 4.0 3.865 3.5
62.3 t rear counterweight and 20 t carbody counterweight
29LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with luffing jib Load capacities in [t] with 25.7 m main boom 65°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
25.3 23.234 15.442 11.7 11.244 11.0 10.546 10.4 9.950 8.8 7.855 7.6 6.5 5.560 5.5 4.865 4.8 4.1 3.570 4.2 3.5 2.875 3.0 2.380 2.6
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 37.4 m main boom 65°
Radi
us [m
]
Jib length [m]20 35 47 59 71 83
30.2 1738 12.140 11.246 9.3 8.750 8.3 7.755 6.7 6.160 5.9 5.3 4.565 4.6 3.970 4 3.3 2.575 3.5 2.9 2.180 2.585 2.1
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 43.4 m main boom 65°
Radi
us [m
]
Jib length [m]20 35 47 59 71 74
32.8 14.534 13.940 11.342 9.844 9.248 8.250 7.7 7.055 6.7 6.160 5.3 4.665 4.7 4.0 3.2 3.070 3.5 2.7 2.575 3.0 2.3 2.1
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 52.1 m main boom 65°
Radi
us [m
]
Jib length [m]20 35 47 53 59 62
36.4 11.338 10.840 10.244 9.046 7.448 7.050 6.755 5.9 5.060 4.3 3.9 3.565 3.8 3.4 3.0 2.870 3.3 3.0 2.5 2.475 2.6 2.1
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
Load capacities in [t] with 58.1 m main boom 65°
Radi
us [m
]
Jib length [m]20 29 35 41 47 50
39 9.340 9.142 8.644 8.146 7.7 6.948 6.6 6.050 6.2 5.755 5.5 5.0 4.6 4.160 4.4 4.0 3.5 3.465 3.5 3.0 2.970 2.6 2.575 2.1
62.3 t rear counterweight and 20 t carbody counterweight
30 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Fixed jib 1008.xx
Jib lengths 11-26 m
Jib configuration 1008.xxJib section Amount of jib sectionsJib foot 5.5 m 1 1 1 1 1 1Jib section 3 m 1 1 1Jib section 6 m 1 1 2 2Jib head 5.5 m 1 1 1 1 1 1Jib length [m] 11 14 17 20 23 26For main boom configuration please refer to the table on page 18.
Units in m
108 8496 72 60 48 36 24 12 00
12
24
36
48
60
72
84
96
108
72.5
69.8
66.8
63.8
60.8
58.1
55.1
52.1
49.1
46.4
43.4
40.4
37.4
34.7
31.7
28.7
25.7
23.0
20.0
262320171411
0°
30°
40°
50°
70°80°
60°
86°
30°15°
31LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with fixed jib 15° Load capacities in [t] with 20 m main boom
Radi
us [m
]
Jib length [m]11 14 20 26
5.7 35.97 35.9 35.9
10 35.9 33.4 24.512 35.9 29.5 21.9 18.116 31.4 24.1 18.0 14.320 29.6 22.8 15.0 12.124 25.9 21.0 14.3 10.528 21.1 18.8 13.6 10.430 19.2 18.0 12.9 10.432 17.2 12.4 10.138 11.2 8.944 8.0
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 40.4 m main boom
Radi
us [m
]
Jib length [m]11 14 20 26
6.4 35.98 35.9 34.5
10 35.9 33.7 26.813 35.9 32.4 25.2 17.420 30.1 27.5 20.9 14.832 16.7 16.8 15.9 12.438 12.8 13 13.3 10.944 10.1 10.3 10.6 9.848 8.7 8.8 9.1 9.250 8.2 8.5 8.755 7.1 7.360 6.1
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 52.1 m main boom
Radi
us [m
]
Jib length [m]11 14 20 26
6.8 35.98 35.9 32.5
11 35.7 31.8 23.813 34.9 30.5 23.0 16.018 31.1 27.2 20.6 14.724 23.3 22.4 18.2 13.336 13.4 13.6 13.9 11.848 8.1 8.3 8.5 8.855 6.1 6.3 6.5 6.760 5.1 5.4 5.665 4.4 4.670 3.7
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 60.8 m main boom
Radi
us [m
]
Jib length [m]11 14 20 26
7.1 33.09 32.2 28.5
11 30.9 27.5 20.713 29.3 26.1 20.1 14.818 25.9 23.2 18.3 13.924 21.3 19.9 16.3 12.736 12.9 13.1 13.1 11.242 9.9 10.1 10.4 10.248 7.7 7.8 8.1 8.465 3.6 3.7 4.0 4.270 3.1 3.375 2.6
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 69.8 m main boom
Radi
us [m
]
Jib length [m]11 14 17 20
7.4 24.69 24.3 21.3
10 24.0 21.3 18.911 23.7 21.2 18.9 17.118 20.0 18.6 17.0 15.326 15.9 15.6 14.6 13.328 15.0 14.7 13.9 12.938 11.1 11.2 11.3 11.046 7.8 8.0 8.2 8.248 7.2 7.3 7.5 7.665 3.1 3.2 3.4 3.570 2.3 2.4 2.5 2.6
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
32 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with fixed jib 30° Load capacities in [t] with 20 m main boom
Radi
us [m
]
Jib length [m]11 14 20 26
8.3 32.011 27.2 22.514 24.0 19.3 14.418 21.8 16.6 12.0 9.820 21.9 15.8 11.2 8.922 22.0 15.9 10.5 8.424 21.0 16.1 10.0 7.926 20.2 15.5 10.0 7.630 18.7 14.4 10.4 7.234 13.8 9.7 7.340 9.0 6.846 6.3
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 40.4 m main boom
Radi
us [m
]
Jib length [m]11 14 20 26
9 35.711 34.4 27.916 29.7 24.5 16.620 26.9 22.7 15.0 11.228 20.6 19.0 12.6 9.430 18.6 17.9 12.2 9.138 13.0 13.3 11.1 8.040 12.0 12.2 10.8 7.848 8.8 9.0 9.4 7.050 8.3 8.7 6.955 7.2 6.660 6.3
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 52.1 m main boom
Radi
us [m
]
Jib length [m]11 14 20 26
9.5 32.412 31.0 26.016 28.0 23.8 16.520 25.4 21.7 15.1 11.230 18.1 17.2 12.7 9.332 16.4 16.4 12.3 9.040 11.5 11.7 11.1 8.142 10.6 10.8 10.7 7.955 6.2 6.4 6.8 6.860 5.2 5.5 5.965 4.5 4.870 3.9
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 60.8 m main boom
Radi
us [m
]
Jib length [m]11 14 20 26
9.8 27.412 26.6 22.516 24.3 21.1 15.320 22.2 19.6 14.5 10.928 17.7 16.5 12.8 9.630 16.7 15.7 12.5 9.438 12.1 12.4 11.3 8.540 11.1 11.4 10.9 8.348 7.9 8.1 8.5 7.660 4.7 4.8 5.2 5.565 3.7 3.8 4.2 4.475 2.4 2.7
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 69.8 m main boom
Radi
us [m
]
Jib length [m]11 14 17 20
10.1 21.812 21.5 18.314 20.8 18.0 15.616 19.8 17.5 15.4 13.426 16.2 14.7 13.2 11.942 9.7 9.9 10.1 10.044 8.9 9.1 9.4 9.555 5.4 5.6 5.8 6.060 4.2 4.4 4.6 4.865 3.2 3.4 3.6 3.770 2.4 2.5 2.7 2.875 2.0
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
33LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Fixed jib 0806.xx
Jib lengths 11-32 m
Jib configuration 0806.xxJib section Amount of jib sectionsJib foot 5.5 m 1 1 1 1 1 1 1 1Jib section 3 m 1 1 1 1Jib section 6 m 1 1 2 2 3 3Jib head 5.5 m 1 1 1 1 1 1 1 1Jib length [m] 11 14 17 20 23 26 29 32For main boom configuration please refer to the table on page 18.
Units in m
108 8496 72 60 48 36 24 12 00
12
24
36
48
60
72
84
96
108
120
78.5
75.5
72.5
69.8
66.8
63.8
60.8
58.1
55.1
52.1
49.1
46.4
43.4
40.4
37.4
34.7
31.7
28.7
25.7
23.0
20.0
0°
30°
40°
50°
60°
70°80° 86°
3229262320171411
30°15°
34 LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with fixed jib 15° Load capacities in [t] with 20 m main boom
Radi
us [m
]
Jib length [m]11 20 26 32
7 21.110 19.5 8.013 18.1 7.2 5.316 17.1 6.5 4.9 3.018 16.7 6.2 4.6 2.620 16.4 5.9 4.4 2.422 16.1 5.7 4.2 2.224 15.8 5.5 4.1 2.128 14.9 5.2 3.830 14.4 5.0 3.738 4.9 3.544 3.4
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 40.4 m main boom
Radi
us [m
]
Jib length [m]11 20 26 32
6.6 18.811 16.8 7.413 16.7 6.9 4.616 16.7 6.6 4.3 2.818 16.7 6.3 4.1 2.620 16.7 6.0 4.0 2.522 16.7 5.9 3.9 2.324 16.7 5.8 3.8 2.032 16.1 5.6 3.748 9.5 5.5 3.655 5.5 3.660 3.6
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 58.1 m main boom
Radi
us [m
]
Jib length [m]11 14 20 26
7.2 13.69 13.1 9.811 12.6 9.3 5.914 12.2 8.9 5.6 3.122 11.6 8.8 5.1 2.228 11.6 8.8 5.0 2.042 10.6 8.8 5.0 2.055 6.6 6.8 5.0 2.060 5.5 5.7 5.0 2.065 4.6 4.4 2.070 3.8 2.075 2.0
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 72.5 m main boom
Radi
us [m
]
Jib length [m]11 14 20 23
7.7 10.99 10.7 8.1
11 10.2 7.612 10.0 7.3 4.713 9.9 7.1 4.5 3.318 9.7 6.8 3.7 2.520 9.7 6.8 3.5 2.322 9.7 6.8 3.5 2.224 9.7 6.8 3.5 2.126 9.7 6.8 3.5 2.046 8.3 6.8 3.575 2.3
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 78.5 m main boom
Radi
us [m
]
Jib length [m]11 14 17 20
7.9 9.710 9.3 7.011 9.0 6.7 5.212 8.7 6.4 5.0 3.918 8.0 5.7 4.1 3.120 8.0 5.6 4.0 2.838 7.7 5.6 4.0 2.748 6.7 5.6 4.0 2.755 4.9 4.9 3.9 2.760 3.8 3.6 3.3 2.565 2.9 2.8 2.7 2.170 2.1 2.2 2.2
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
35LR 1160.1 1003.04.07 08 - rA - EN v01.022020 - 13161865
Load capacities with fixed jib 30° Load capacities in [t] with 20 m main boom
Radi
us [m
]
Jib length [m]11 20 26 29
9 18.016 16.1 5.820 15.2 5.3 4.022 14.6 5.1 3.8 2.726 13.2 4.9 3.6 2.430 12.3 4.7 3.5 2.234 4.7 3.5 2.138 4.7 3.5 2.040 4.7 3.542 3.544 3.546 3.5
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 40.4 m main boom
Radi
us [m
]
Jib length [m]11 20 26 29
9.3 16.316 15.4 5.820 15.4 5.4 3.922 15.4 5.3 3.8 2.728 15.0 5.2 3.6 2.334 14.2 5.0 3.6 2.236 13.8 5.0 3.6 2.146 10.2 5.0 3.6 2.048 9.5 5.0 3.6 2.055 5.0 3.6 2.060 3.6 2.065 2.0
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 58.1 m main boom
Radi
us [m
]
Jib length [m]11 20 26 29
9.9 11.916 11.3 5.420 11.3 5.1 3.222 11.3 5.1 3.1 2.628 11.3 4.9 2.9 2.232 11.3 4.8 2.9 2.140 11.3 4.8 2.8 2.046 9.4 4.8 2.848 8.7 4.8 2.860 5.6 4.8 2.870 3.8 2.875 2.8
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 72.5 m main boom
Radi
us [m
]
Jib length [m]11 14 20 26
10.4 10.113 9.7 7.418 9.1 7.0 4.420 9.1 7.0 4.3 2.524 9.1 7.0 4.3 2.328 9.1 7.0 4.3 2.146 8.0 7.0 4.3 2.155 5.9 6.0 4.3 2.160 4.6 4.7 3.9 2.165 3.6 3.7 3.4 2.170 2.7 2.8 3.0 2.175 2.5 2.1
62.3 t rear counterweight and 20 t carbody counterweight
Load capacities in [t] with 78.5 m main boom
Radi
us [m
]
Jib length [m]11 14 20 23
10.6 9.013 8.7 6.518 8.1 6.0 3.920 8.0 5.9 3.8 2.940 7.7 5.8 3.6 2.642 7.4 5.8 3.6 2.644 7.1 5.8 3.6 2.646 6.9 5.8 3.6 2.655 5.6 5.7 3.6 2.660 4.2 4.2 3.6 2.665 3.0 3.1 2.9 2.470 2.1 2.4 2.2 2.1
62.3 t rear counterweight and 20 t carbody counterweight
TLT 11962119. Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cabin or manual. Otherwise we recommend you to plan your lifting job using Crane Planner 2.0.
Prin
ted
in A
ustr
ia
LR 1
160.
1 10
03.0
4.07
08
- rA
- E
N v
01.0
2202
0 -
1316
1865
Sub
ject
to m
odifi
catio
ns.
Liebherr-Werk Nenzing GmbH Dr. Hans Liebherr Str. 1, 6710 Nenzing/Austria
+43 50809 41-473, Fax: +43 50809 41-499www.liebherr.com, [email protected]/LiebherrConstruction
The Liebherr Group of Companies
Wide Product RangeThe Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr’s high- value products and services enjoy a high reputation in many other fields. The wide range includes domestic appliances, aerospace and transportation systems, machine tools and maritime cranes.
Exceptional Customer BenefitEvery product line provides a complete range of models in many different versions. With both their technical excellence and acknowledged quality, Liebherr products offer a maxi-mum of customer benefits in practical applications.
State-of-the-art TechnologyTo provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in-house, for instance the entire drive and control technology for construction equipment.
Worldwide and IndependentHans Liebherr founded the Liebherr family company in 1949. Since then, the family business has steadily grown to a group of more than 130 companies with nearly 44,000 employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company.
www.liebherr.com
Please contact us. Download datasheet