© 2
01
1 W
URT
H U
SA
, Inc
. Re
visi
on
03
/2
01
1
P.R. = Panel Range
06.0070
Includes
# Description Qty Art #
1 1 0691500112
2 Glue Sticks 10 0890100057
3 10 0691500115
4 10 0691500116
5 10 0691500117
6 10 0691500118
7 Adapter - round, small, blue 10 0691500121
8 Lifter for Adapter 1 0691500114
9 Spreader - blue 2 0691500120
10 Clean Prep 1 08909380
11 Electric Glue Gun 1 0702100057
12 3 158544003
13 1 pair 089940309
14 75 189992131
18909902
BODY & FENDER DENT PULLING SYSTEM
on boundary of dent
No repainting
battery - No disassembly/assembly times
required
containers etc
Freeze Spray
Art. # 1890 9902
(Sold Separately)
WURTH Patented Product
By attaching the tension adapters, dents in different materi-
als and surfaces can be pulled out. Subsequent painting of
many dents may not be needed.
Description Art #
Body & Fender Dent Pulling System 0691500111
Description Art #
Maxi Lift 0691500140
Adapter Bolt (sold separately) 0691500141
2
9
6
11
12
10
13 14
1
3
4
75
8
Features
Application of the Adapters
round or long dents.
Application on the following materials
Notice
MAXI LIFT
© 2
01
1 W
URT
H U
SA
, Inc
. Re
visi
on
03
/2
01
1
P.R. = Panel Range
06.0075
DENT LIFTER ADAPTERS
# Description Art #
1 Suitable for round and large dents, the adapter material enables high tensile forces and stress 0691500115
2 0691500116
3 0691500117
4 0691500118
5 0691500121
6 Not included in Body & Fender Dent Pulling System (previous page) 0691500122
CROSSOVERS
on small, large, round and long dents and bulges. After application the
adapters can be re-used.
Van Motorcycle Convertible Cover Truck Panel
Economy Heat Gun
Art. # 0702 590
See Tool Section
Professional Heat Gun
Art. # 0702 600
See Tool Section
1 2 3 4 5 6
Application of the Adapters
See next page for Easy Steps to using WURTH USA’s Dent Lifter Adapters!
2mm
DO NOT apply to hot surfaces
Application on the following materials
© 2
01
1 W
URT
H U
SA
, Inc
. Re
visi
on
03
/2
01
1
P.R. = Panel Range
06.0080
DENT LIFTER ADAPTERS - EASY STEPS TO USE
7. Remove remaining adhesive residue using
3. Glue adapter to deepest spot and cool using compressed air.
loose and remove pulling to the side using
the installation attachment.
it using the special spatula.
4. Attach sliding hammer to the adapter and straighten dent using small, light strokes.