-
DIPTI
MARINE FENDERS
www.irmome.com
-
1IRM of fers the widest range of fenders to suit almost all
kinds of ber ths and ber thing methods in various
climatic and site conditions. We manufacture the entire range of
solid as well as floating (pneumatic, foam-
filled & hydro pneumatic) fenders to accommodate ber thing
requirements of the smallest fishing boats to
ULCCs and VLCCs for jet ty as well as ship to ship operations.
Our fenders are renowned for their long and
trouble-free service life without deterioration in i ts per
formance and characteristics. They are the last
word in reliabili ty and safety and are preferred worldwide
where cri tical applications are envisaged.
Custom-made designs of DIPTI fenders of fer greater economy
while conforming to the international
specifications and operational requirements. Today, DIPTI is
synonymous with the high quali ty precision
moulded rubber fenders for por ts and harbors.
DIPTI fenders are manufactured by compression moulding process
at very high pressure up to 2000
tons load, which is much bet ter and advanced technology than
the ancient ex trusion process, resulting in
zero porosity / bubble free moulding of fenders. DIPTI fenders
are manufactured from dif ferent type of
rubber compound according to the ber thing energy requirements
& site conditions. These compounds are
made of purest form of natural rubber, high abrasion resistant
synthetic rubbers like Neoprene, SBR, EPDM,
having excellent U.V resistance, resistance to ozone aging,
resistance to sea water etc. They can with stand
ex treme climate conditions from very low ambient temperature to
very high ambient temperature
prevailing in various locations across the globe.
DIPTI MARINE FENDERS
-
2INTEGRATED MANAGEMENT SYSTEMS POLICY
As suppliers of high quali ty rubber and engineering products
and providers of prompt and
ef fective customer services, IRM Offshore & Marine
Engineers Pvt. Ltd is determined to
be a market leader. We are therefore commit ted to comply with
the requirements of the
Integrated Management System.
We are commit ted to,
Satisfy the customers by understanding their requirements and
supplying them with world class quali ty products.
Adherence to rigorous Integrated Management Systems standards
and continual
improvement in work, Environment, Health and Safety aspects.
Providing training to the employees for quali ty
improvement.
Comply with applicable legal and other requirements with respect
to Environment, Health & Safety.
Profess environment friendly processes, practices and
actions.
Ensures safe operations, and prevent loss of proper ty.
Protection of employees, contractual persons and persons living
in adjacent areas from the foreseeable work hazards.
Maintain safe and healthy work environment.
Be always aler t and equipped to respond to emergencies and
disasters by having an updated emergency response plan and disaster
management plan.
Surendra A. Soni
[Founder Chairman]
DATE: 01.06.2007
PLACE: AHMEDABAD
-
INDEX
3
1 "DIPTI" CYLINDRICAL FENDERS
2 "DIPTI" ARCH FENDERS
3 "DIPTI" FLAT TOP ARCH FENDERS
4 "DIPTI" DYNA ARCH FENDERS
5 "DIPTI" ARCH DAV SERIES FENDERS
6 "DIPTI" ARCH DAVP SERIES FENDERS
7 "DIPTI" W FENDERS
8 "DIPTI" I FENDERS
9 "DIPTI" IV FENDERS
10 "DIPTI" IV ELEMENT FENDERS
11 "DIPTI" IVM FENDERS
12 "DIPTI" CELL FENDERS
13 "DIPTI" CONE FENDERS
14 "DIPTI" PNEUMATIC FENDERS
15 "DIPTI" HYDRO PNEUMATIC FENDERS
16 "DIPTI" ROLLER FENDERS DRF SERIES
4
6
8
10
12
14
16
18
20
22
24
26
28
30
34
36
17 "DIPTI" ROLLER FENDERS DR SERIES
18 "DIPTI" ROLLER FENDERS DRS SERIES
19 "DIPTI" SUPER STRIP FENDERS DSS SERIES
21 "DIPTI" CORNER ARCH FENDERS
22 "DIPTI" LADDER FENDERS
23 "DIPTI" DDA FENDERS SERIES A
24 "DIPTI" DDA FENDERS SERIES B
25 "DIPTI" FLAT BOARD FENDERS
38
40
42
44
45
46
48
50
20 "DIPTI" STRIP FENDERS DSF SERIES 43
-
DIPTI CYLINDRICAL FENDERS DCY SERIES
D
d
L
18
31
48 / 51
69 / 124
94 / 111
123 / 120
192 / 180
276
375
490 / 400
620
766
927
1103
1295
1501 / 1350
1725 / 1560
1960
2212
2480
2764
3062
3376
3705
4050
4409
4784
5174
5580
6001
6437
6890
APPROX. WEIGHT
Kgs/Mtr.
DIMENSION TABLE ALL DIMENSIONS ARE IN MM.
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
75
100
125
150 / 150
175 / 190
200 / 190
250 / 245
300
350
400 / 500
450
500
550
600
650
700 / 800
750 / 850
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
150
200
250 / 256
300 / 380
350 / 380
400 / 390
500 / 485
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
3000
2900
2800
DCY 150
DCY 200
DCY 250 / DCY 256
DCY 300 / DCY 380
DCY 350 / DCY 380
DCY 400 / DCY 390
DCY 500 / DCY 485
DCY 600
DCY 700
DCY 800
DCY 900
DCY 1000
DCY 1100
DCY 1200
DCY 1300
DCY 1400
DCY 1500
DCY 1600
DCY 1700
DCY 1800
DCY 1900
DCY 2000
DCY 2100
DCY 2200
DCY 2300
DCY 2400
DCY 2500
DCY 2600
DCY 2700
DCY 3000
DCY 2900
DCY 2800
MODEL NO. DO dO
4 www.irmome.com
DIPTI DCY series Cylindrical Fenders are commonly used fenders
recommended for all types of application to ensure a safe and
linear ber thing for the
dif ferent kind of Vessels. DCY Fenders are an economical
solution to protect most of the ber thing structures and of fer
much ease for installation. The
distinct characteristic of these Fenders are a linear load
deflection curve. This implies less reaction force at lower
deflection. When the range of vessel
varies from small to big in the same ber th, these fenders of
fer lesser reaction force for smaller vessel unlike buckling column
fenders. These Fenders are
manufactured by compression moulding process at very high
pressure of 1000 to 2000 Tons Load, which is much bet ter and
advanced technology than
the ancient ex trusion process, resulting in zero porosity /
bubble free moulding of Rubber Fenders. This thus enhances i ts
design life. DIPTI Cylindrical
Fenders are available in wide range from 100 mm outer diameter
to 3000 mm outer diameter in 2 to 3 meter length single piece
moulded.( Higher length
available on specific request.)
-
DIPTI CYLINDRICAL FENDERS DCY SERIES
PERFORMANCE TABLE
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH
5www.irmome.com
+( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE
AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED
ELSEWHERE IN THE ACHIEVE.
0.14
0.26
0.41
0.60
0.80
1.06
1.65
2.38
3.23
4.22
5.35
6.60
7.99
9.50
11.2
12.9
14.9
16.9
19.1
21.4
23.8
26.4
29.1
31.9
34.9
38.0
41.3
44.6
48.1
51
55
59
9.3
12.4
15.5
18.6
21.7
24.8
31.0
37.2
43.4
49.6
56
62
68
75
81
87
93
100
105
112
118
124
130
137
143
149
155
162
167
174
180
186
0.19
0.34
0.53
0.77
1.05
1.37
2.14
3.08
4.20
5.49
6.94
8.58
10.4
12.3
14.5
16.8
19.3
21.9
24.8
27.7
30.9
34.3
37.8
41.5
45.4
49.4
54
58
63
67
72
77
0.26
0.47
0.74
1.07
1.46
1.96
2.98
4.28
5.38
7.62
9.64
11.9
14.4
17.1
20.1
23.3
26.8
30.5
34.4
38.6
43.0
47.6
52
57
63
68
74
80
86
93
100
107
10.3
13.8
17.2
20.7
24.1
27.5
34.4
41.3
48.1
55
62
69
76
83
90
97
103
110
117
124
130
138
144
151
158
165
172
179
185
194
199
206
DCY 150
DCY 200
DCY 250
DCY 300
DCY 350
DCY 400
DCY 500
DCY 600
DCY 700
DCY 800
DCY 900
DCY 1000
DCY 1100
DCY 1200
DCY 1300
DCY 1400
DCY 1500
DCY 1600
DCY 1700
DCY 1800
DCY 1900
DCY 2000
DCY 2100
DCY 2200
DCY 2300
DCY 2400
DCY 2500
DCY 2600
DCY 2700
DCY 2800
DCY 2900
DCY 3000
19.8
26.4
33.0
39.6
46.2
53
66
80
93
106
119
132
145
159
172
185
198
212
224
238
251
264
277
291
304
317
330
344
356
370
383
396
0.37
0.66
1.04
1.50
2.04
2.67
4.17
6.01
8.18
10.6
13.5
16.7
20.2
24.0
28.2
32.7
37.6
42.7
48.3
54
60
66
74
80
88
96
104
112
122
130
150
140
MODEL NO.
DEFLECTION
GRADE
E(T-M) E(T-M) E(T-M) E(T-M) E(T-M) E(T-M) E(T-M)E(T-M) E(T-M)
E(T-M) E(T-M) E(T-M) E(T-M) E(T-M) E(T-M) E(T-M)E(T-M)R(T)
9.83
13.15
16.40
19.73
22.98
26.23
32.80
39.38
45.88
52.45
59.25
65.75
72.50
79.25
85.75
92.50
98.25
105.00
111.75
118.25
124.25
131.50
137.50
144.25
150.75
157.50
164.0
170.75
176.75
184.75
190
196.5
R(T) R(T) R(T) R(T) R(T) R(T) R(T) R(T)R(T) R(T) R(T) R(T) R(T)
R(T) R(T) R(T) R(T)
55%50%
R1 R1.1
55%50%
R1.2
55%50%
R1.3
55%50%
R2.0
55%50%
R2.1
55%50%
R2.2
55%50%
R2.3
55%50%
R3.0
55%50%
E(T-M)
0.25
0.46
0.72
1.04
1.41
1.89
2.89
4.15
5.31
7.38
9.34
11.53
13.93
16.55
19.45
22.55
26.0
29.53
33.30
37.35
41.63
46.10
50.45
55.25
61.00
65.75
71.75
77.50
83.25
90.00
96.75
103.5
18.98
25.30
31.63
37.95
44.28
50.75
63.25
76.50
89.00
101.50
114.00
126.5
139.00
152.25
164.75
177.25
189.75
203.00
214.75
228.00
240.50
253.0
265.50
278.75
291.25
303.75
316.25
329.50
341.25
354.50
367
379.5
0.36
0.64
1.01
1.45
1.97
2.58
4.03
5.80
7.90
10.25
13.03
16.13
19.50
23.18
27.23
31.58
36.3
41.23
46.63
52.15
58.00
63.75
71.50
77.25
85.00
92.50
100.5
108.25
117.75
125.5
135.25
144.75
9.35
12.50
15.60
18.75
21.85
24.95
31.20
37.45
43.65
49.90
56.50
62.50
69.00
75.50
81.50
88.0
93.5
100.0
106.5
112.5
118.5
125.0
131.0
137.5
143.5
150.0
156.0
162.5
168.5
175.50
181.00
187
0.25
0.44
0.70
1.00
1.37
1.81
2.79
4.01
5.24
7.14
9.03
11.15
13.45
16.00
18.80
21.80
25.20
28.55
32.20
36.10
40.25
44.60
48.90
53.50
59.00
63.50
69.5
75.00
80.50
87.00
93.50
100
18.15
24.20
30.25
36.30
42.35
48.50
60.50
73.00
85.00
97.00
109.00
121.0
133.00
145.50
157.50
169.50
181.50
194.00
205.50
218.00
230.00
242.0
254.00
266.50
278.50
290.50
302.5
315.00
326.50
339.00
351.00
363
0.35
0.62
0.97
1.40
1.90
2.49
3.89
5.60
7.62
9.91
12.55
15.55
18.80
22.35
26.25
30.45
35.00
39.75
44.95
50.30
56.00
61.5
69.00
74.50
82.00
89.00
97.0
104.50
113.50
121.00
130.50
139.5
8.88
11.85
14.80
17.78
20.73
23.68
29.60
35.53
41.43
47.35
53.75
59.25
65.50
71.75
77.25
83.50
88.75
95.00
101.25
106.75
112.75
118.5
124.50
130.75
136.25
142.50
148.0
154.25
160.25
166.25
172
177.5
0.24
0.43
0.67
0.97
1.32
1.74
2.70
3.88
5.16
6.89
8.73
10.78
12.98
15.45
18.15
21.05
24.40
27.58
31.10
34.85
38.88
43.10
47.35
51.75
57.00
61.25
67.25
72.50
77.75
84.00
90.25
96.5
17.33
23.10
28.88
34.65
40.43
46.25
57.75
69.50
92.50
104.00
115.5
127.00
138.75
150.25
161.75
173.25
185.00
196.25
208.00
219.50
231.0
242.50
254.25
265.75
277.25
288.75
300.50
311.75
323.50
335.00
346.5
81.00
0.33
0.59
0.94
1.34
1.83
2.39
3.74
5.39
7.33
9.56
12.08
14.98
18.10
21.53
25.28
29.33
33.70
38.28
43.28
48.45
54.00
59.25
66.50
71.75
79.00
85.50
93.5
100.75
109.25
116.50
125.75
134.25
4.1
5.4
6.8
8.1
9.5
10.8
13.5
16.2
18.9
21.6
24.3
27.0
29.7
32.4
35.1
37.8
40.5
43.2
45.9
48.6
52
54
57
60
63
65
68
71
73
76
79
81
0.23
0.41
0.65
0.93
1.27
1.66
2.60
3.74
5.09
6.65
8.42
10.4
12.5
14.9
17.5
20.3
23.6
26.6
30.0
33.6
37.5
41.6
45.8
50
55
59
65
70
75
81
87
93
16.5
22.0
27.5
33.0
38.5
44.0
55
66
77
88
99
110
121
132
143
154
165
176
187
198
209
220
231
242
253
264
275
286
297
308
319
330
0.32
0.57
0.90
1.29
1.76
2.30
3.60
5.18
7.05
9.21
11.6
14.4
17.4
20.7
24.3
28.2
32.4
36.8
41.6
46.6
52
57
64
69
76
82
90
97
105
112
121
129
8.4
11.2
14
16.8
19.6
22.4
28
33.6
39.2
44.8
51
56
62
68
73
79
84
90
96
101
107
112
118
124
129
135
140
146
152
157
163
168
7.33
9.75
12.20
14.63
17.08
19.50
24.38
29.25
34.13
39.00
44.33
48.75
53.93
59.10
63.53
68.70
73.13
78.30
83.48
87.90
93.25
97.50
102.75
108.00
112.50
117.50
122.0
127.25
132.25
136.75
142.00
146.25
0.21
0.37
0.59
0.85
1.16
1.51
2.36
3.40
4.63
6.04
7.65
9.45
11.37
13.55
15.93
18.45
21.43
24.18
27.28
30.55
34.08
37.80
41.63
45.48
49.98
53.75
59.08
63.65
68.28
73.50
79.00
84.5
14.70
19.60
24.50
29.40
34.30
39.20
49.0
58.80
68.60
78.40
88.25
98.0
107.75
117.75
127.50
137.25
147.0
157.00
166.50
176.50
186.25
196.00
205.75
215.75
225.50
235.25
245.0
255.00
264.50
274.50
284.25
294
0.29
0.51
0.81
1.16
1.58
2.07
3.24
4.66
6.34
8.28
10.44
12.95
15.65
18.60
21.85
25.35
29.13
33.08
37.40
41.88
46.73
51.33
57.45
62.13
68.35
73.85
81.0
87.25
94.50
100.75
108.75
116
6.25
8.30
10.40
12.45
14.55
16.60
20.75
24.90
29.05
33.20
37.65
41.5
45.85
50.20
54.05
58.40
62.25
66.60
70.95
74.80
79.50
83.00
87.50
92.00
96.00
100.00
104.0
108.50
112.50
116.50
121.00
124.5
0.19
0.34
0.53
0.77
1.04
1.36
2.13
3.06
4.16
5.44
6.89
8.5
10.25
12.20
14.35
16.60
19.25
21.75
24.55
27.50
30.65
34.00
37.45
40.95
44.95
48.50
53.15
57.30
61.55
66.00
71.00
76
12.9
17.2
21.5
25.8
30.1
34.4
43.0
51.6
60.2
68.8
77.5
86.0
94.5
103.5
112.0
120.5
129.0
138.0
146.0
155.0
163.5
172.0
180.5
189.5
198.0
206.5
215.0
224.0
232.0
241.0
249.5
258
0.26
0.46
0.72
1.03
1.41
1.84
2.87
4.13
5.63
7.35
9.27
11.49
13.90
16.50
19.40
22.50
25.85
29.35
33.20
37.15
41.45
45.65
50.90
55.25
60.70
65.70
72
77.50
84.00
89.50
96.50
103
5.18
6.85
8.60
10.28
12.03
13.70
17.13
20.55
23.98
27.40
30.98
34.25
37.78
41.30
44.58
48.10
51.38
54.90
58.43
61.70
65.75
68.50
72.25
76.00
79.50
82.50
86
89.75
92.75
96.25
100
102.75
0.16
0.30
0.47
0.68
0.93
1.21
1.89
2.72
3.70
4.83
6.12
7.55
9.12
10.85
12.78
14.75
17.08
19.33
21.83
24.45
27.23
30.20
33.28
36.43
39.93
43.25
47.23
50.95
54.83
58.50
63.00
67.5
11.10
14.80
18.50
22.20
25.90
29.60
37.0
44.40
51.80
59.20
66.75
74.0
81.25
89.25
96.50
103.75
111.0
119.00
125.50
133.50
140.75
148.00
155.25
163.25
170.50
177.75
185
193
199.5
207.5
214.75
222.00
0.22
0.40
0.62
0.90
1.23
1.60
2.51
3.61
4.91
6.42
8.11
10.04
12.15
14.40
16.95
19.65
22.58
25.63
29.00
32.43
36.18
39.98
44.35
48.38
53.05
57.55
63
67.75
73.50
78.25
84.25
90
-
DIPTI ARCH FENDERS DA SERIES
N
O
M
3500
3000
U UO O
S
T N N
M M
O O
N T
S
1000
K
Q
2500
2000
JQ J
R KK
P
1500
I P
C
H
FR
D
X
B A
W
E
DETAIL X
DA 150H
MODEL NO.
150 300 240 98 96 170 22.5 M22 110 112.5 107.5 110 107.5 110 855
675 620 785 715 671 40
65
100
130
230
355
520
932
1490
200 400 320 131 128 175 30 M24 120 120 120 122.5 120 120 860 680
620 785 715 672
250 500 410 164 160 200 37.5 M27 130 132.5 132.5 127.5 132.5 130
865 680 620 790 715 673
300 600 490 197 192 225 45 M30 140 140 137.5 140 145 140 870 685
625 790 715 674
400 800 670 262 256 275 60 M36 150 150 147.5 150 150 900 700 635
800 725
500 1000 840 328 320 325 75 M42 160 160 157.5 160 165 930 715
645 810 730
600 1200 1010 393 384 375 90 M48 170 170 167.5 170 170 960 730
655 820 740
800 1600 1340 524 501 475 120 M64 180 180 180 182.5 180 1040 770
680 845 760
1000 2000 1680 655 626 475 150 M64 200 200 200 202.5 200 - 1100
800 700 865 775 -
DA 200H
DA 250H
DA 300H
DA 400H
DA 500H
DA 600H
DA 800H
DA 1000H
H A B C D E F W P Q R S T U I J K M N O
APPROX
WEIGHT
Kgs/Mtr
DIMENSIONS TABLE ALL DIMENSIONS ARE IN MM
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
6
- -
- -
- -
- -
www.irmome.com
-
DIPTI ARCH FENDERS DA SERIES
PERFORMANCE TABLE
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH
DIPTI DA series Arch Fenders were introduced to improve upon the
per formance of Cylindrical Fenders. DIPTI Arch Fenders are
having
a bet ter Energy / Reaction force ratio and recommended for all
types of applications. The very shape of these Fenders helps to
dissipate the
stresses evenly. These Fenders are very easy to install and are
maintenance free. Generally preferred for small to medium range
Vessels.
These are manufactured by compression moulding under very high
load in single piece with steel inser t plates encapsulated in the
legs to
fi t them to Whar f /Jet ty Structure. These Fenders have got
very good shear resistance and do not require tension and shear
chains even
when they are equipped with Frontal Pads. The unique rubber
compound developed for these Fenders are having excellent U.V
Resistance,
resistance to ozone aging, resistance to sea water and ex treme
climate conditions from very low ambient temperature to very
high
temperatures prevailing in Global ber thing locations. DIPTI DA
series Arch Fenders are available in wide range from 150mm height
to
1000mm height in dif ferent lengths up to 3.5 ( or more on
specific request) meter single piece as per customers
requirements.
7www.irmome.com
+( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE
AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED
ELSEWHERE IN THE ACHIEVE.
DEFLECTION
RUBBER GRADE
DA 150H
MODEL NO.
12.8
45%
R1 R1.1 R2.1R2 R3 R3.1 R4
45%45% 45% 45% 45% 45%50% 50%50% 50% 50% 50% 50%
17.2 11 14.8 8.2 11 5.5 7.50.7
E (T-M) E (T-M) E (T-M)E (T-M)E (T-M) E (T-M) E (T-M) E (T-M) E
(T-M) E (T-M) E (T-M) E (T-M)E (T-M) E (T-M)R (T)
R (T)
R (T)
R (T)
R (T)
R (T)
R (T)
R (T)
R (T)
R (T)
R (T)
R (T)
R (T)
R (T)
0.9 0.55 0.75 0.45 0.52 0.3 0.35
1.5 1.7 1.3 1.5 0.90 1.1 0.6 0.7
1.9 2.2 1.7 2 1.30 1.5 0.9 1.1
2.7 3.2 2.5 2.9 1.90 2.2 1.3 1.5
4.4 5.5 4.3 4.8 3.20 3.9 2.3 2.7
7.1 8.7 6.9 7.7 5.00 5.9 3.2 3.8
10.3 12 9.2 10.7 7.10 8.2 4.7 5.4
18.7 21.4 16.3 19.3 12.3 14.4 8.3 9.6
28.6 37.7 25.7 29.8 19.1 23.1 13.8 16.2
17.3 22.8 15.2 19.8 11.2 15.1 7.4 10
21.3 23.9 18.4 24.8 13.9 18.8 9.3 12.5
25.5 34.4 22 30.1 16.5 22.6 11.4 15.4
34.4 46.5 29.7 40.1 22.3 30.1 15.2 20.5
42.7 57.9 37.2 50.2 27.8 37.4 18.4 25.2
51.2 69.3 44.5 60.5 33.8 45.7 22.3 30.2
68.5 92.5 59.5 80.6 45.2 60.7 29.7 40.6
85.8 116 74.6 101 56.2 75.7 37.3 50.5
DA 200H
DA 250H
DA 300H
DA 400H
DA 500H
DA 600H
DA 800H
DA 1000H
11.9 0.63
16.3 1.40
19.9 1.80
23.8 2.60
32.1 4.35
40.0 7.0
47.9 9.8
64.0 17.5
80.2 27.2
16.0 0.83
21.3 1.60
24.4 2.10
32.3 3.05
43.3 5.15
54.1 8.2
64.9 11.4
86.6 20.4
108.5 33.8
9.6 0.50
13.2 1.10
16.2 1.50
19.3 2.20
26.0 3.75
32.5 5.95
39.15 8.2
52.4 14.3
65.4 22.4
12.9 0.64
17.5 1.30
21.8 1.75
26.4 2.55
35.1 4.35
43.8 6.80
53.10 9.5
70.7 16.9
88.4 26.5
6.9 0.38
9.3 0.75
11.6 1.10
14.0 1.60
18.8 2.75
23.1 4.10
28.1 5.90
37.5 10.30
46.8 16.45
9.3 0.44
12.6 0.90
15.7 1.30
19.0 1.85
25.3 3.30
31.3 4.85
38.0 6.80
50.7 12.00
63.1 19.65
-
DIPTI FLAT TOP ARCH FENDERS DFTA SERIES
DFTA 250H 250 625 530 280 202.5 200 30 M27 120 120 120 120 115
140 830
840
850
840
840
840
840
670
670
670
675
670
670
670
650 800
820
840
860
880
900
920
720 100
152
248
390
553
946
1428
740
760
780
800
820
840
680
700
720
740
750 640 340 245 225 36 M30 130 125 130 125 135 130 655
1000 850 450 325 275 40 M36 140 140 140 140 135 145 660
1200 1040 560 380 275 45 M36 150 150 150 150 150 160
- 760
-- 780
-- 800
665
1400 1230 675 437.5 325 50 M42 170 170 170 170 165 670
1800 1600 900 550 375 75 M48 200 200 200 200 195 680
2200 2000 1125 662.5 375 100 M48 230 230 230 230 225 700
300
400
500
600
800
1000
DFTA 300H
DFTA 400H
DFTA 500H
DFTA 600H
DFTA 800H
DFTA 1000H
MODEL NO. HH A B C D E WF P Q R S T U I J K M N O
APPROXWEIGHTKgs./Mtr.
DIMENSIONS TABLE ALL DIMENSIONS ARE IN MM
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
8
H
B A
C
D
F
W
SMMS M
3000
3500
O
NT
U OO
NN
E
OO U
TN
R
2500
1500
P
R
Q
2000
KK K
P
JJ
I
Q
1000
X
DETAIL X
www.irmome.com
-
DIPTI FLAT TOP ARCH FENDERS DFTA SERIES
DFTA 250H
MODEL NO.
DEFLECTION
PERFORMANCE TABLE
RUBBER GRADE
R (T) R (T) R (T) R (T)E (T-M) E (T-M) E (T-M) E (T-M)
26.7
52.5%
R1 R2 R3 R4
52.5% 52.5% 52.5%
2.85 20.9 2.20 17.2 1.83 13.5 1.44
32.2 4.05 24.8 3.14 20.6 2.80 16.7 2.60
43.2 7.23 33.3 5.56 27.4 4.62 22.3 3.73
53.8 11.5 41.4 8.72 34.7 7.24 27.5 5.82
64.5 16.2 49.7 12.4 41.6 10.4 33.1 8.33
86.3 29.1 66.3 22.0 55.2 18.6 44.0 14.6
108.0 45.2 82.8 34.7 69.0 29.0 55.3 23.3
DFTA 300H
DFTA 400H
DFTA 500H
DFTA 600H
DFTA 800H
DFTA 1000H
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH
DIPTI DFTA series Flat Top Arch Fenders are developed to reduce
hull pressure, which of fers excellent energy absorption with
relatively
less hull pressure due to i ts wide contact face. This is in
fact positioned between Arch Fenders and "W" type Fender in the
category of direct
contact Fenders. These Fenders can also be equipped with Frontal
Frame to suit specific ber thing conditions and duty. These Fenders
are
equipped with inser t plates at the base to facili tate fi tment
to the whar f. These Fenders are used ex tensively on dif ferent
types of ber thing
structures. A wide rage of Vessels can be ber thed on these
Fenders depending upon the Height and Energy - Reaction
characteristics.
These Fenders are resistant to U.V rays, Ozone aging and sea
water at times polluted by traces of oil too. These are very stable
and at times
used in combination to increase the Ber thing Energy. DIPTI DFTA
series Flat Top Arch Fenders are available in wide range from
250mm
height to 1000mm height in dif ferent lengths up to 3.5 meter(or
more if required) single piece as per customers requirements.
9www.irmome.com
+( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE
AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED
ELSEWHERE IN THE ACHIEVE.
-
DIPTI DYNA ARCH FENDERS DYA SERIES
MODEL NO.
85
120
208
325
480
875
1395
250 500 410 164 160 200
37.5
M27 130 132.5 132.5 127.5 132.5 130 865 680 620 790 715 673
300 600 490 225 195 225
33
M30 140 140 137.5 140 145 140
150
160
170
870 685 625 790 715 674
680
686
692
400 800 670 300 260 275 40 M36 150 150 147.5 150 150 900 700 635
800 725
500 1000 840 375 325 325 45 M42 160 160 157.5 160 165 930 715
645 810 730
600 1200 1010 450 390 375 54 M48 170 170 167.5 170 170 960 730
655 820 740
800 1600 1340 600 520 475 72 M56 180 180 180 182.5 180
--- - -
-
--
- 1040 770 680 845 760
1000 2000 1680 750 650 475 90 M64 200 200 200 1100 800 700
DYA 250H
DYA 300H
DYA 400H
DYA 500H
DYA 600H
DYA 800H
DYA 1000H
H A B C D E F W P Q R S T U I J K M N O
APPROX
WEIGHT
Kgs/Mtr.
DIMENSIONS TABLE ALL DIMENSIONS ARE IN MM
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
10
A
C
FD
H
B
X
N
O
M
3500
3000
U UO O
S
T N N
M M
O O
N T
S
1000
K
Q
2500
2000
JQ J
R KK
P
1500
I P
R
W
E
DETAIL X
www.irmome.com
-
11www.irmome.com
DIPTI DYNA ARCH FENDERS DYA SERIES
DEFLECTION
RUBBER GRADE
MODEL NO.
52%
R1 R2 R3 R4
52% 52% 52%55% 55% 55% 55%
E(T-M) E(T-M) E(T-M) E(T-M) E(T-M) E(T-M) E(T-M) E(T-M)R(T) R(T)
R(T) R(T) R(T) R(T) R(T) R(T)
2.8 3.0 2.2 2.3 1.8 1.9 1.6 1.7
4.1 4.4 3.1 3.3 2.6 2.8 2.2 2.4
7.3 7.8 5.6 6.0 4.6 4.9 4.0 4.3
11.3 12.1 8.7 9.3 7.2 7.7 6.2 6.6
16.3 17.5 12.6 13.5 10.4 11.1 8.9 9.5
29.0 31.1 22.3 23.9 18.5 19.8 15.9 17.0
45.4 48.6 34.9 37.4 28.9 31.0 24.8 26.6
27.0 37.5 20.8 28.8 17.2 23.9 14.8 20.5
32.4 45.0 24.9 34.6 20.6 28.6 17.7 24.6
43.2 60.0 33.2 46.1 27.5 38.2 23.6 32.8
54.0 75.0 41.5 57.6 34.4 47.8 29.5 41.0
64.7 89.9 49.8 69.2 41.2 57.2 35.4 49.2
86.4 120 66.4 92.2 55.0 76.4 47.2 65.6
108 150 83.0 115.3 68.8 95.6 59.0 82.0
DYA 250H
DYA 300H
DYA 400H
DYA 500H
DYA 600H
DYA 800H
DYA 1000H
PERFORMANCE TABLE
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH
DIPTI DYA series Arch Fender are an innovative modified version
of other solid Fenders like Arch & W type Fenders. Whar f side
of Dyna
Arch fenders are fully reinforced with steel plate, which
transfer ber thing energy on more area. Thus reduce pressure on Jet
ty wall. These
fenders are more preferred where the dock or jet ty walls are
weaker. These Fenders can be equipped with low friction rubbing
board to
reduce friction and Frontal Frame to enhance coverage. Generally
used in small Harbours & Jet ties and ensures long life and per
formance.
The geometry and proper ty allows the DYA series Fenders to
deflect more resulting into a bet ter energy absorption and
reaction force ratio
as compared to DA type Arch Fenders. These Fenders are very easy
to install and are maintenance free and of fers a long trouble
free
service life. These Fenders are generally used for small to
medium range Vessels. These Fenders are also manufactured from
specialized
rubber compound having excellent resilience which gives
excellent U.V resistance proper ty, resistance to ozone aging,
resistance to sea
water. This added feature helps Fenders to per form well under
ex treme climate conditions from very low ambient temperature to
very high
ambient temperature prevailing in Global ber thing locations.
DIPTI DYA series Arch Fenders are available in wide range from 250
mm
height to 1000mm height in dif ferent lengths up to 3.5 (or more
if required) meter single piece as per customers requirements.
+( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE
AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED
ELSEWHERE IN THE ACHIEVE.
-
DIPTI ARCH FENDERS DAV SERIES
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
12
DIMENSIONS TABLE ALL DIMENSIONS ARE IN MM
595300
1550
1850
800
1000
981500
600 1160
400 808
CBAH
200
250 500
422
150 326
PFD E TSRQ N WMKJI
400
1300
1550
640
960
800
480
240
320
163
520
650
260
390
325
195
98
130
50
164 175
499 375
580 375
266 225
373 325
318 275
194 175
142 150
108 150
20
41
52
26
28
26
24
18
16
200
250
100
150
125
75
50
62.50 62.50 62.50 62.50 62.50 500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500 1300
500 770
500 186
500 280
500 412
500 108
500 70
500 M16
M20
M24
M24
M30
M36
M42
M48
M48
30
500 48
250
200
100
125
150
75
50 50 50 50
50
250
200
100
125
150
75
50
250
200
100
125
150
75
50
250
200
100
125
150
75
50
MODEL NO.
DAV 150H
DAV 200H
DAV 250H
DAV 300H
DAV 400H
DAV 500H
DAV 600H
DAV 800H
DAV 1000H
WEIGHT
(Kg/Mtr)
X
I I
WE
DETAIL X
www.irmome.com
-
DIPTI ARCH FENDERS DAV SERIES
PERFORMANCE TABLE
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH
DIPTI DAV series V shaped Arch Fenders are developed to improve
upon the per formance of the conventional Arch Fenders with
cost
ef fectiveness. The geometry and profile allow the DAV series
Fenders to deflect more, resulting into a bet ter energy absorption
and reaction
force ratio. These Fenders are easy to install and are
maintenance free and of fers a long trouble free service life. They
are generally
preferred for small to medium range Boats and Tugs and are
recommended for any kind of Whar fs and Jet ties. Our DAV Fenders
are
manufactured by compression moulding under very high load in
single piece with steel inser t plates encapsulated in the legs to
fi t them to
Whar f /Jet ty Structure. The unique high abrasion resitant
rubber compound having excellent resilience developed for these
Fenders give
excellent U.V resistance proper ty, resistance to ozone aging,
resistance to sea water. This added feature helps Fenders to per
form well
under ex treme climate conditions from very low ambient
temperature to very high temperatures prevailing in Global ber
thing locations.
DIPTI DAV series Arch Fenders are available in wide range from
150mm height to 1000mm height in dif ferent lengths up to 3.5 (or
more if
required) meter single piece as per customers requirements.
13www.irmome.com
+( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE
AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED
ELSEWHERE IN THE ACHIEVE.
R1 R1.1 R3 R3.1R2 R2.1
51.5%
DAV 150H 0.74 9.6 0.5612.7
12.8 1.016.9 1.31
16.0 1.5621.1 2.05
19.2 2.2525.3 2.95
25.6 4.033.9 5.25
32.1 6.2442.2 8.20
38.5 8.9950.7 11.6
51.3 16.067.5 21.0
64.1 25.084.4 32.8
DAV 200H
DAV 250H
DAV 300H
DAV 400H
DAV 500H
DAV 600H
DAV 800H
DAV 1000H
MODEL R(T) R(T) R(T) R(T)E(T-M) E(T-M) E(T-M)
E(T-M)E(T-M)R(T)
7.4 0.43
9.9 0.76
12.3 1.19
14.8 1.71
19.7 3.05
24.7 4.76
29.6 6.86
39.4 12.2
49.3 19.1
E(T-M)R(T)
DEFLECTION
RUBBER GRADE
11.2 0.65
14.9 1.16
18.6 1.81
22.3 2.60
29.8 4.63
37.2 7.22
44.6 10.3
59.4 18.5
74.3 28.9
8.5 0.50
11.4 0.88
14.2 1.38
17.0 1.98
22.7 3.53
28.4 5.50
34.05 7.9
45.4 14.1
56.7 22.1
6.75 0.39
9.1 0.68
11.2 1.07
13.5 1.52
18.0 2.73
22.4 4.26
26.8 6.04
35.6 10.9
44.7 17.1
-
DIPTI ARCH FENDERS DAVP SERIES
14
X
I I
C
F
H
D
A B
WE
DETAIL X
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
DIMENSIONS TABLE ALL DIMENSIONS ARE IN MM
595300
1550
1850
800
1000
981500
600 1160
400 808
CBAH
200
250 500
422
150 326
PFD E TSRQ N WMKJI
400
1300
1550
640
960
800
480
240
320
163
520
650
260
390
325
195
98
130
50
164 175
499 375
580 375
266 225
373 325
318 275
194 175
142 150
108 150
26
41
52
20
28
26
24
18
16
200
250
100
150
125
75
50
62.50 62.50 62.50 62.50 62.50 500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500 1300
500 770
500 186
500 280
500 412
500 108
500 70
500 M16
M20
M24
M24
M30
M36
M42
M48
M48
30
500 48
250
200
100
125
150
75
50 50 50 50
50
250
200
100
125
150
75
50
250
200
100
125
150
75
50
250
200
100
125
150
75
50
MODEL NO.
DAV 150H
DAV 200H
DAV 250H
DAV 300H
DAV 400H
DAV 500H
DAV 600H
DAV 800H
DAV 1000H
WEIGHT
(Kg/Mtr)
www.irmome.com
-
DIPTI ARCH FENDERS DAVP SERIES
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH
DIMENSIONS TABLE ALL DIMENSIONS ARE IN MM
45
70
80
65
65
50
60
49
65
U
73
380
490
195
260
95
140
0
0
V
330-410
330-410
330-410
330-410
330-410
330-410
330-410
330-410
330-410
Y
60-70
60-70
70-85
70-85
70-85
70-85
70-85
70-85
70-85
X
70-90
70-90
70-90
70-90
70-90
70-90
70-90
70-90
70-90
X
250-300
250-300
250-300
250-300
250-300
250-300
250-300
250-300
250-300
Y
DAVP 150H
MODEL NO.
DAVP 200H
DAVP 250H
DAVP 300H
DAVP 400H
DAVP 500H
DAVP 600H
DAVP 800H
DAVP 1000H
DIPTI DAVP series V shape Arch Fenders are similar to the DAV
series V Fenders, but equipped with anti sparking, low friction
rubbing
board to improve upon their ef fective service life and superior
per formance. It of fers reduced friction and resultant less load
transmit ted to
the structure. This also prevent Fender face from get ting
damaged by any type of protrusion of ber thing Vessels and enhance
Fender
service life under ex treme rolling and pitching of Vessels
during loading and unloading of cargo. DIPTI DAVP Fenders are
versatile, easy
to install and ensure a long trouble free life. They are
produced by compression moulding with thermic fluid heating in
controlled
atmosphere to ensure optimum per formance characteristics. These
Fender of fers excellent resistance to atmospheric aging and
hence
very good strength and stabili ty.DIPTI DAVP series Arch Fenders
are available in wide range from 150mm height to 1000mm height
in
dif ferent lengths up to 3 (or more if required) meter single
piece, fi t ted with suitable rubbing board (Synthetic Resin Facia
Pads) as per
customers requirements.
15www.irmome.com
+(R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-NOTE:
INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN
BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE
ACHIEVE.
R1 R3 R3.1R2.1R2R1.1
54%
DAVP 150H 8.9 0.560.730.95 11.515.0
11.8 0.9915.4 1.2920.0 1.68
14.8 1.5619.2 2.0225.0 2.63
17.8 2.2423.1 2.9130.0 3.78
23.7 3.9830.8 5.1740.0 6.72
29.6 6.2138.8 8.0850.0 10.5
35.5 8.9346.2 11.660.0 15.1
47.3 15.961.5 20.780.0 26.9
59.2 24.976.9 32.3100.0 42.0
DAVP 200H
DAVP 250H
DAVP 300H
DAVP 400H
DAVP 500H
DAVP 600H
DAVP 800H
DAVP 1000H
MODEL R(T) R(T) R(T) R(T)E(T-M) E(T-M) E(T-M) E(T-M)E(T-M)
E(T-M)R(T) R(T)
DEFLECTION
RUBBER GRADE
13.3 0.84
17.7 1.49
22.1 2.33
26.6 3.35
35.4 5.95
44.4 9.29
53.1 13.4
70.8 23.8
88.5 37.2
10.2
13.6
17.0
20.5
27.3
34.2
40.85
54.4
68.1
0.65
1.14
1.79
2.58
4.58
7.15
10.3
18.3
28.6
0.8
10.5
13.3
15.9
21.3
26.0
30.2
42.3
53.1
0.48
0.84
1.41
2.01
3.57
5.56
8.0
14.2
22.4
-
DIPTI W FENDERS DW SERIES
H
C
B A
D
F
WE
X
N
O
M
3500
3000
U UO O
S
T N N
M M
O O
N T
S
Q
2500
JQ J
1500
1000
P I P
K
2000
R KK R
DIMENSION TABLE
DETAIL X
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
16
DIMENSION TABLE
MODEL NO.
DW 250H
DW 300H
DW 400H
DW 500H
DW 600H
DW 800H
DW 1000H
250 625 535 330 170 200 28 M27 130 132.5 132.5 127.5 132.5 130
865 680 620 790 715 673 100
300 750 640 396 204 225 33 M30 140 140 137.5 140 145 140
150
160
170
200
250
870 685 625 790 715 674 140
680 242
686 378
692 550
700 985
700 1580
400 1000 870 528 272 275 44 M36 150 150 147.5 150 150 900 700
635 800 725
500 1250 1090 660 340 325 55 M42 160 160 157.5 160 165 930 715
645 810 730
600 1500 1310 776 408 375 66 M48 170 170 167.5 170 170 960 730
655 820 740
800 2000 1740 1035 544 475 88 M56 180 180 180 182.5 180 1040 770
680 845
860
760
7651000 2480 2180 1265 670 475 110 M64 200 200 200 210 220 1100
800 700
H A B C D E F W P Q R S T U I J K M N O
ALL DIMENSIONS ARE IN MM.
APP.
WEIGHT
IN KG.
www.irmome.com
-
DIPTI W FENDERS DW SERIES
DIPTI DW series W type Fenders are an improvised version of the
Arch and Flat Top Arch Fenders. These Fenders are having more
deflection and bet ter Energy / Reaction ratio in comparison to
both Cylindrical, Arch & Flat Top Arch Fenders. Because of wide
Fender face,
the Hull Pressure is also relatively low as compared to both
Arch and Flat Top Arch Fenders. These types of Fenders can be
easily installed
and they are maintenance free. Wide range is available for dif
ferent Vessels. These Fenders are moulded under very high load in
single
piece encapsulating the steel plates in the base of the Fender
legs for fi tment to the Whar f. This Fender has got long life in a
very severe duty
conditions. All types of big Vessels can be ber thed on these
fenders due to i ts bet ter resilience and higher deflection. Our
DW type Fenders
can be fi t ted to any type of Ber thing Structures with ease.
These Fenders can also be supplied with Anti Friction and Anti
sparking UHMW
Facia Pads to increase Fender life. The excellent mechanical
proper ties of rubber coupled with very good resistance towards sea
water,
ozone aging and ul tra violet rays makes i t a preferred Fender
for most applications and for a wide variety of vessels too. DIPTI
DW series
W type Fenders are available in wide range from 250mm height to
1000mm height in dif ferent lengths up to 3.5meter (or more if
required)
single piece as per customers requirements.
17www.irmome.com
PERFORMANCES TABLE
DEFLECTION
RUBBER GRADE
MODEL NO.
50%
R1 R2 R3 R4
50% 50% 50%55% 55% 55% 55%
E (T-M) E (T-M) E (T-M) E (T-M) E (T-M) E (T-M) E (T-M) E (T-M)R
(T) R (T) R (T) R (T) R (T) R (T) R (T) R (T)
3.15 3.5 2.35 2.55 1.85 2.2 1.75 1.85
4.25 4.9 3.25 3.6 2.65 3.1 2.25 2.65
7.6 8.75 5.65 6.35 4.5 5.3 4.0 4.75
11.9 13.7 8.75 9.8 7.25 8.35 6.25 7.0
17.1 19.2 12.3 14.3 10.5 12.0 8.75 9.8
30.2 34.3 21.9 25.3 18.5 21.2 15.5 17.9
47.2 53.5 34.2 37.4 28.5 33.0 24.3 27.5
28.4 39.8 21.5 30.7 18.2 24.6 15.2 21.3
34.0 48.5 25.8 36.7 21.5 29.8 18.2 25.2
45.2 63.5 34.3 49.0 28.4 40.2 24.4 34.2
56.7 80.3 43.2 61.0 36.2 49.8 30.8 42.0
68.0 95.8 52.3 74.2 42.9 59.9 36.8 50.7
91.2 128 70.1 98.6 57.5 79.8 49.5 68.2
115.0 160 87.1 123 72.1 99.5 62.2 84.5
DW 250H
DW 300H
DW 400H
DW 500H
DW 600H
DW 800H
DW 1000H
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH +( R : REACTION FORCE
E : ENERGY ABSORPTION TOLERANCE 10%)-
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE
AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED
ELSEWHERE IN THE ACHIEVE.
-
DIPTI I FENDERS DI SERIES
18
P1
S
H
A
P2 P2
1000 L1500 L
2500 L
3000 L
3500 L
4000 L
W
X
E
DETAIL X
2000 L
150 150850
550 550900
850
www.irmome.com
-
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
DIPTI I FENDERS DI SERIES
DIPTI DI series I type Fender are a combination of two I section
ver tical legs and fabricated Frontal Frames equipped with low
friction UHMW HDPE pads.
These Fenders are the most ideal choice for cri tical heavy duty
applications where ber thing conditions are not generally
favourable. These Fenders are
best option for open sea Ber thing Structures / Dolphins / Jet
ties, where ex treme wave and current conditions are prevailing.
Our DI type Fenders are
capable of per forming under ex treme shear and compression with
at most reliabili ty. They are equipped with weight, shear and
tension chain depending
upon the duty. These Fenders are compression moulded at very
high load in controlled curing parameters. They of fer excellent
resistance to ozone aging,
UV rays and sea water. DIPTI DI series I-type Fenders are
available in wide range from 400mm height to 2500mm height in dif
ferent lengths up to 1 to 4
meters with suitable Frontal Frames and chains as per customers
requirements.
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH
PERFORMANCE TABLE
45% 50%DEFLECTION
MODEL NO.
DI 400H
DI 600H
DI 800H
DI 1000H
DI 1400H
DI 1700H
DI 2000H
E(T-M)
2.80
6.30
11.20
17.50
34.30
50.50
70.0
109.0
R(T)
19.20
28.8
38.4
48.0
67.20
81.60
96.0
120.0
R(T)
21.20
31.80
42.40
53.00
74.20
90.10
106.0
132.5
E(T-M)
3.20
7.20
12.80
20.0
39.20
57.80
80.0
125.0DI 2500H
19
DIMENSIONS TABLE ALL DIMENSIONS ARE IN MM.
H
400 1000
1300
1400
1650
2190
2600
3000
3800
600
800
1000
1400
1700
2000
2500
A P2P1 W
95
195
230
340
530
580
640
900
405
555
490
560
730
900
1060
1300
M30
M64
M64
M42
M48
M48
M48
M76
E
275
475
475
275
375
375
375
550
S
600
900
1000
1250
1750
2130
2500
3120
DI 400H
MODEL NO.
DI 600H
DI 800H
DI 1000H
DI 1400H
DI 1700H
DI 2000H
DI 2500H
www.irmome.com
+( R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-
PERFORMANCE VALUES ARE FOR A PAIR OF ELEMENTS
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE
AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED
ELSEWHERE IN THE ACHIEVE.
-
3500
3000
600
900
250
900
550150 150
150
500 550
900
500
150
250
250
2000
1500
1000
600
600150
600150 150
150
250
600
1500
250 1000L150 250150700
1500L
2500L
3000L
3000
2500
550
700
250
200
150 550 550
700700
550 250150
200
2500
2000
550250
850
550600150 150
150150
250
8502000L
C
A
C
L
P
H
Q
RR K
J
BB D
P
T
DIV 400H 400 1000 100 400 00 225 M 30 400 300 400
600 500 400
700 600 500
800 700 600
815 730 690
900 800 700
1000 900 800
1200 1050 1000
1400 1200 1200
1600 1400 1450
M 36
M 36
M 42
M 42
M 42
M 42
M 48
M 48
M 64
100 275
100 275
100 325
100 325
100 325
100 325
150 375
200 375
200 475
500
600
700
730
800
900
1050
1200
1400
200
100
250
220
150
300
375
450
500
1500
1500
2000
2000
2000
2500
3000
3500
4000
600
800
1000
1150
1250
1400
1700
2000
2500
DIV 600H
DIV 800H
DIV 1000H
DIV 1150H
DIV 1250H
DIV 1400H
DIV 1700H
DIV 2000H
DIV 2500H
1000 30018060
65
70
75
75
75
85
95
100
100
370
460
550
580
650
730
860
1000
1200
M 22
M 24
M 24
M 30
M 30
M 36
M 36
M 36
M 42
M 48
1400 600
1700 900
2000 1280
2150 1520
2300 1760
2600 2120
3100 3020
3600 3940
4250 5920
MODEL NO. H A B C D WE J P Q R K T L WEIGHT
DIMENSION TABLE ALL DIMENSIONS ARE IN MM.
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
20
DIPTI IV FENDERS DIV SERIES
W
E
DETAIL X
www.irmome.com
WEIGHT VALUES ARE FOR PAIR OF ELEMENTS
-
DIPTI IV FENDERS DIV SERIES
PERFORMANCE TABLE
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH
DIPTI DIV series IV type Fenders are an innovation in modern
Fendering and i t is the modified version of Element / Leg type of
Fenders. These Fenders are
having Fender fi t ting flanges at both sides which of fer more
sturdiness as compared to Element / Leg types of Fenders. These
Fenders are most suitable
for coping up with lateral loading. The very shape gives i t
excellent shear strength, sturdiness and i t can accommodate the
biggest Vessels in very dif ficul t
ber thing conditions. These Fenders too are equipped with
reinforcements and Frontal Frames. These features make i t very
popular for versatile
applications. Since both the upper and lower faces of the legs
are having steel inser ts and each leg being a single moulded piece
i t ensure bet ter
mechanical strength and long life. Also reduces replacement
cost. The superior proper ties of rubber used ensures a trouble
free long life for these Fenders
due to i ts excellent mechanical strength and resistance to
ozone aging, sea water resistance & ultra violet rays
resistance. These Fenders are used for a
wide variety of Vessels & Ber thing Structures and of fer
reliabili ty and optimum per formance. DIPTI DIV series IV Fenders
are available in wide range
from 400mm height to 2500mm height in dif ferent lengths up to 3
meters (or more if required) with suitable Frontal Frames as per
customers
requirements.
21www.irmome.com
+(R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-
PERFORMANCE VALUES ARE FOR A PAIR OF ELEMENTS
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE
AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED
ELSEWHERE IN THE ACHIEVE.
DIV 400H
DIV 600H
DIV 800H
DIV 1000H
DIV 1150H
DIV 1250H
DIV 1400H
DIV 1700H
DIV 2000H
DIV 2500H
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
5.0
5.4
11.3
12.1
20.2
21.5
34.4
45.5
36.6
48.1
53.4
56.8
67.0
71.2
98.8
106.0
137.0
145.0
214.0
227.0
55%
55%
55%
55%
55%
55%
55%
55%
55%
55%
R1 R2 R3 R4 R5
33.0
35.3
49.5
53.5
66.6
70.6
82.5
95.0
87.9
101.1
103.0
110.0
116.0
123.0
140.0
149.0
165.0
176.0
206.0
220.0
R (T)
30.8
33.0
46.2
49.4
61.1
65.9
77.0
88.6
82.0
94.4
96.8
103.0
108.0
115.0
131.0
139.0
154.0
164.0
193.0
205.0
R (T)
22.0
23.5
32.8
35.3
44.3
47.1
54.9
63.3
58.6
67.4
68.8
73.2
77.0
82.0
93.5
99.6
110.0
117.0
138.0
147.0
R (T) R (T)
26.4
28.2
39.6
42.4
52.8
56.5
66.0
76.0
70.3
80.9
82.5
87.9
92.4
98.4
112.0
120.0
132.0
141.0
165.0
176.0
R (T)E (T-M)
4.7
5.0
10.6
11.3
18.8
20.1
31.9
42.3
33.9
44.9
49.9
53.0
62.6
66.4
92.2
98.0
128.0
136.0
200.0
212.0
E (T-M)
4.0
4.3
9.1
9.7
16.1
17.2
27.4
36.2
29.1
38.5
42.8
45.4
53.6
57.0
79.1
84.0
109.0
116.0
171.0
182.0
E (T-M)
3.4
3.6
7.6
8.1
13.4
14.4
22.8
30.2
24.2
32.1
35.6
37.8
44.7
47.5
65.9
70.0
91.2
96.6
143.0
151.0
E (T-M)E (T-M)
MODEL
NO.DEFLECTION
2.7
2.8
6.0
6.4
10.7
11.4
18.2
19.4
24.2
25.7
28.0
30.5
35.8
38
52.7
56.0
73.0
77.5
114.0
17.6
18.8
26.4
28.2
35.1
37.6
44.0
46.8
50.5
53.8
54.0
60.0
61.6
65.6
74.8
79.7
88.0
93.7
110.0
117.1 121.0
-
22
DIPTI IV ELEMENT FENDERS
www.irmome.com
DIMENSION TABLE ALL DIMENSIONS ARE IN MM.
DIVE 250H
MODEL NO.MODEL NO.
250
H P Q R S M N W X YAPPROX
WT Kg./Mt.
107 114 69 20 152 31 214 50 300 M20 32
44
95
132
162
175
260
295
315
405
480
655
957
1225
M24
M24
M30
M30
M30
M36
M36
M36
M42
M42
M48
M48
M56
300 130
160
138 84 25 184 38 250 50 300
500
500
500
500
500
500
500
500
500
500
500
500
400
195
183 99 25 244 38 320 250
500
210
229 119 30 306 42 390 250
550
225
252 126 32 336 42 420 250
600
270
275 133 35 366 42 450 250
700
285
321 163 35 428 56 540 250
750
300
344 170 38 458 56 570 250
800
335
365 178 38 486 57 600 250
900
365
412 198 42 550 60 670 250
1000
435
458 212 46 610 60 730 250
1200
495
557 252 46 748 61 870 250
1400
565
641 282 50 856 67 990 250
1600 733 321 50 978 76 1130 250
DIVE 300H
DIVE 400H
DIVE 500H
DIVE 550H
DIVE 600H
DIVE 700H
DIVE 750H
DIVE 800H
DIVE 900H
DIVE 1000H
DIVE 1200H
DIVE 1400H
DIVE 1600H
BOLTS
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE. WEIGHT VALUES ARE FOR SINGLE ELEMENT
1000L = (2X + 3Y)
X Y Y Y X
R Q N
TYPE 1
H
S
P
W
MN N
TYPE 2
DETAIL X
1900M645007062000 962 355 62 1222 95 1412 250DIVE 2000H
-
DIPTI IV ELEMENT FENDERS
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH
PERFORMANCE TABLE PERFORMANCE VALUES ARE FOR SINGLE ELEMENT
DIPTI DIVE Element Fenders are multi purpose Fenders and are
generally used for all type of applications from small Ber thing
Ferry Jet ty
and big Ber thing Structures for big size Vessels, thus of
fering a lot of flexibili ty. These Fenders are very popular and
used ex tensively for all
types of applications. In combination they can cover dif ferent
tidal variation and long range of Vessels. These Fenders finds ex
tensive
application when they are employed in combination both in ver
tical & horizontal direction. These Fenders are invariably fi t
ted with low
frication Frontal Pad for optimum per formance. These Fenders
can also be equipped with Frontal Frames if required. They of fer
excellent
resistance to sea water, ozone aging & ultra violet rays and
do have excellent mechanical proper ties. DIPTI DIVE series Element
Fenders
are available in wide range from 250mm height to 1600 mm height
in dif ferent lengths from 6 to 8 Meters with suitable Frontal Pads
or
Frontal Frames as per customers requirements
23www.irmome.com
+(R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-NOTE:
INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE AVAILABLE IN
BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED ELSEWHERE IN THE
ACHIEVE.
DIVE 250H
DIVE 300H
DIVE 400H
DIVE 500H
DIVE 550H
DIVE 600H
DIVE 700H
DIVE 750H
DIVE 800H
DIVE 900H
DIVE 1000H
DIVE 1200H
DIVE 1400H
DIVE 1600H
16.3
19.3
23.5
29.4
32.3
35.2
41.3
44.3
47.0
52.9
58.7
70.6
82.3
93.9
1.6
2.4
4.3
6.8
8.3
9.8
13.2
15.1
17.3
21.9
27.1
38.6
53.0
69.3
11.3
13.6
16.4
20.5
22.6
24.6
28.7
30.9
32.9
37.0
41.1
49.2
57.5
65.8
1.2
1.7
3.0
4.7
5.7
6.8
9.2
10.6
12.1
15.3
18.9
27.0
37.0
48.4
8.8
10.5
12.6
15.8
17.4
19.0
22.1
23.8
25.6
28.4
31.6
37.8
44.2
50.6
0.9
1.3
2.3
3.6
4.4
5.2
7.0
8.1
9.3
11.8
14.6
20.7
28.6
37.4
7.9
9.5
11.3
14.2
15.7
17.1
19.9
21.4
22.8
25.6
28.4
34.0
39.8
45.5
0.8
1.2
2.1
3.2
4.0
4.7
6.3
7.3
8.4
10.6
13.1
18.6
25.7
33.7
R (T) R (T) R (T) R (T) R (T) R (T) R (T) R (T) R (T) R (T)
R 1 R 1.1 R 1.2 R 2 R 2.1 R 2.2 R 2.3 R 3 R 4R 1.3
E (T-M) E (T-M) E (T-M) E (T-M) E (T-M) E (T-M) E (T-M) E (T-M)
E (T-M) E (T-M)
57.5%
57.5%
57.5%
57.5%
57.5%
57.5%
57.5%
57.5%
57.5%
57.5%
57.5%
57.5%
57.5%
57.5%
15.1 1.5
17.9 2.2
21.7 4.0
27.2 6.3
29.9 7.7
32.6 9.1
38.2 12.2
41.0 14.0
43.5 16.0
48.9 20.3
54.3 25.1
65.3 35.7
76.1 49.0
86.9 64.1
13.8 1.4 12.6 1.3
16.5 2.1 15.0 1.9
20.0 3.7 18.2 3.3
25.0 5.8 22.7 5.2
27.5 7.0 25.0 6.4
29.9 8.3 27.3 7.6
35.0 11.2 31.9 10.2
37.6 12.9 34.3 11.7
40.0 14.7 36.4 13.4
45.0 18.6 41.0 17.0
50 23 45.5 21.0
59.9 32.8 54.6 29.9
70 45.0 63.7 41.0
79.9 58.9 72.8 53.6
10.7 1.13 10.1 1.05 9.4 1.0
12.8 1.6 12.1 1.5 11.3 1.4
15.5 2.8 14.5 2.65 13.6 2.5
19.3 4.4 18.2 4.15 17.0 3.9
21.3 5.4 20.0 5.05 18.7 4.7
23.2 6.4 21.8 6.0 20.4 5.6
27.1 8.7 25.4 8.10 23.8 7.6
29.1 10.0 27.4 9.4 25.6 8.7
31.1 11.4 29.3 10.7 27.4 10.0
34.9 14.4 32.7 13.6 30.6 12.7
38.7 17.8 36.4 16.8 34.0 15.7
46.4 25.4 43.5 23.9 40.7 22.3
54.2 34.9 50.9 32.8 47.5 30.7
62.0 45.7 58.2 42.9 54.4 40.2
MODEL NO. DEFLECTION
TYPE 1 TYPE 2
DIVE 2000H 101.6 108.7 72.3 77.3 42.9 45.9 35.6 38.066% 94.3
100.8 86.9 93.0 79.6 85.1 64.9 69.4 57.6 61.6 50.2 53.7
-
DIPTI IVM FENDERS DIVM SERIES
THE PERFORMANCE VALUES MENTIONED ARE SUBJECT TO CHANGE WITHOUT
NOTICE. WEIGHT VALUES ARE FOR PAIR OF ELEMENTS
24
200 275 100
270 275 100
330 325 100
360 325 100
400 325 100
M24 545
M24 825
M30 1185
M30 1480
M30 1695
G E I T
ALL DIMENSIONS ARE IN MM.
DIVM 600H
DIVM 800H
DIVM 1000H
DIVM 1150H
DIVM 1250H
MODEL NO.
DIMENSION TABLE
460 325 100
550 375 150
660 375 200
330
410
480
515
560
F
630
750
860
1020 810 475 200
370
460
550
580
650
M
730
860
1000
1200
400
500
600
690
700
D
800
1000
1200
1400
500
600
700
730
800
C
900
1050
1200
1400
760
920
1060
1130
1220
B
1360
1650
1920
2240
1400
1700
2000
2150
2300
A
2600
3100
3600
4200
600
800
1000
1150
1250
H
1400
1700
2000
2500
DIVM 1400H
DIVM 1700H
DIVM 2000H
DIVM 2500H
65
70
75
75
75
J
85
95
100
100
370
460
550
550
650
K
730
860
1000
1200
530
640
750
750
850
L
970
1190
1400
1650
M36 2065
M36 2930
M42 4005
M36
M36
M42
M42
M42
W
M42
M48
M48
M64 M48 5755
APPROXWT Kg./Mt.
11
00
11
00
K L K
30
00
90
09
00
90
0
40
04
00
150
150
KLK
25
00
11
00
11
00
40
04
00
150
150
85
08
50
K L K
40
04
00
12
00
20
00
15
01
50
85
08
50
K L K
10
00
70
015
0
150
150
150
K L K
40
07
00
40
0
12
00
15
00
A
C D C
MJ
W
T
J
B
F
IG G
F
H
W
E
DETAIL X
www.irmome.com
-
25www.irmome.com
DIPTI IVM FENDERS DIVM SERIES
DIVM 600H
DIVM 800H
DIVM 1000H
DIVM 1150H
DIVM 1250H
DIVM 1400H
DIVM 1700H
60.0%
60.0%
60.0%
60.0%
60.0%
60.0%
60.0%
46.5 13.3 43.5 12.4 37.2
40.0
50.1
53.5
62.2
67.1
71.5
77.0
77.8
84.1
87.5
93.9
105.7
114.4
13.1
22.8
23.1
34.2
36.1
45.5
47.5
53.5
56.5
66.9
70.5
98.5
103.8
46.8
57.8
63.2
72.5
78.4
83.5
90.1
.190.6
98.2
101.7
109.6
123.5
133.4
50.0 14.0
62.2 23.5
67.1 24.8
77.7 36.7
84.0 38.6
89.5 48.5
96.9 51.3
97.3 57.2
105.2 60.2
108.8 71.6
117.5 75.5
132.4 105.5
142.8 111.3
62.5%
62.5%
62.5%
62.5%
62.5%
62.5%
62.5%
R1 R2 R3
R (T) E (T-M) R (T) E (T-M) R (T)
MODEL
NO.
DEFECTION
PERFORMANCE TABLE PERFORMANCE VALUES ARE FOR A PAIR OF
ELEMENTS
10.7 33.2 8.9
9.5
15.8
16.7
24.9
25.8
32.2
34.2
38.5
40.7
47.5
50.3
70.6
74.7
33.7
41.6
44.9
52.0
56.2
59.8
64.6
65.0
70.2
72.8
78.6
88.4
95.5
11.3
18.9
20.1
29.5
31.2
38.5
40.8
45.8
48.2
57.5
60.3
84.6
88.9
R4
E (T-M) R (T) E (T-M)R (T) E (T-M)
DIVM 2000H
DIVM 2500H
60.0%
60.0%
97.6
102.6
152.3
160.4
104.0
112.3
130.0
140.4
116.8
123.3
182.5
192.3
124.5
134.6
155.8
168.2
136.5
143.7
212.6
224
145.3
157.0
182
196
155.8 145.9
168.3 153.9
194.8 228.1
210.5 240.1
62.5%
62.5%
PERFORMANCE VALUES ARE FOR 1000 MM. LENGTH
DIPTI DIVM series Fenders are an improvisation of both IV type
and IV Element type Fenders enhancing the per formance and making i
t
more cost ef fective for the same type of duty. This can be
compressed more and by the vir tue of i ts more deflection, i ts
capacity to absorb
Energy is more, compared to similar IV type and IV Element type
Fenders. These Fenders are reinforced with MS Inser ts at top &
bot tom,
can be supplied in any length. These can be fi t ted both in ver
tical & horizontal direction and of fer maximum stabili ty
towards ver tical &
horizontal loads. These Fenders are equipped with unique rubbing
boards to reduce the friction and avoid sparking. Modular
arrangement of
fix ing multiple Fenders is the added advantage of these
Fenders. These Fenders cater to a wide variety of applications both
in terms of
Vessels (size & types) and Structures. These Fenders of fer
a trouble free long life and are maintenance free due to superior
proper ties of
the unique rubber compound employed while moulding these Fenders
with precision. DIPTI DIVM series Fenders are available in wide
range from 400mm height to 2500mm height in dif ferent length
from 3 Meters (or more if required) with suitable Frontal Pads or
Frontal
Frames as per customers requirements.
+(R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE
AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED
ELSEWHERE IN THE ACHIEVE.
-
26 www.irmome.com
DIPTI CELL FENDERS DC SERIES
D H
W
F
E
DETAIL X
A
B
C
X
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
O
O
DC 400H 400 550 650 25 390 165 M 22 75
95
220
400
790
1200
1500
2300
3000
3700
5000
7400
10700
18500
M 24
M 27
M 30
M 36
M 42
M 42
M 48
M 48
M 56
M 64
M 64
M 64
M 76
175
200
225
270
325
325
360
360
435
475
475
475
550
390
495
450
550
650
725
825
689
727
765
710
834
815
25
25
30
35
37
40
42
45
50
50
57
70
75
650
840
1050
1300
1500
1650
1850
2000
2100
2200
2550
2950
3350
550
700
900
1100
1300
1450
1650
1800
1900
2000
2300
2700
3150
500
630
800
1000
1150
1250
1450
1600
1700
2000
2250
2500
3000
DC 500H
DC 630H
DC 800H
DC 1000H
DC 1150H
DC 1250H
DC 1450H
DC 1600H
DC 1700H
DC 2000H
DC 2250H
DC 2500H
DC 3000H
MODEL NO.APPROX
WEIGHT IN KG.A D E F H W
DIMENSION TABLE ALL DIMENSIONS ARE IN MM.
4 X 30
4 X 32
4 X 39
6 X 40
6 X 47
6 X 50
6 X 53
6 X 61
8 X 61
8 X 66
8 X 74
10 X 74
10 X 74
12 X 90
00
0
0
0
0
0
0
0
0
0
0
0
0
0
BO CO
-
DIPTI CELL FENDERS DC SERIES
PERFORMANCE TABLE
DIPTI DC series Cell Fenders are best employed for smallest to
biggest Vessels where Reaction Force is an impor tant cri teria.
Among all types of
Fenders, Cell Fenders of fer minimum reaction per ton-meter
energy absorbed. The very geometrical shape gives i t sturdiness,
shear resistance, compact
Structure and the capacity to absorb energy equally from all
directions. The Cylindrical buckling column absorbs axial loads ef
fectively and buckles
radially. This results in multi directional dispersion of
energy. These fenders are equipped with Frontal Frames with low
friction facia Pads to reduce the
shear force as well as the hull pressure. Multiple installations
with Frontal Frame are feasible to reduce height of Fender and to
accommodate smallest and
biggest Vessels at high tidal variation site. These Fenders find
ex tensive application for a variety of Vessels and Ber thing
Structures. The excellent
mechanical proper ty of the rubber compound used for
manufacturing these Fenders ensures long life and reliabili ty even
though they are subjected to
ex treme loads. DIPTI Cell type DC series Fenders are
manufactured by compression moulding process at very high load
unlike conventional lining and
vulcanizing process which gives superior proper ties to the
rubber and ensures zero porosity moulding and trouble free long
life for these Fenders.
27www.irmome.com
+(R : REACTION FORCE E : ENERGY ABSORPTION TOLERANCE 10%)-
NOTE: INTERMEDIATE PERFORMANCE WITH SIMILAR E/R RATIO ARE
AVAILABLE IN BETWEEN GRADES WITH GRADIENT OF 10% AS DOCUMENTED
ELSEWHERE IN THE ACHIEVE.
1.2
1.3
2.4
2.6
4.8
5.1
9.8
10.4
19.5
20.7
29.7
31.5
38.2
40.4
59.6
63.1
80.1
84.4
96.0
101.7
156.4
165.6
247.2
261.7
339.1
359.0
510.0
545.0
5.7
6.1
8.9
9.5
14.0
14.9
21.5
22.9
35.6
37.9
47.1
50.1
55.6
59.2
74.9
79.6
91.2
96.9
102.9
109.4
142.5
151.4
212.6
226.0
262.5
279.1
375.0
440.0
1.0
1.1
1.9
2.1
3.9
4.1
7.6
8.0
15.6
16.6
23.8
25.2
30.5
32.3
47.7
50.5
64.1
67.8
76.8
81.4
125.1
132.5
210.1
222.4
288.2
305.1
430.0
465.0
1.6
1.7
3.1
3.4
6.3
6.7
12.7
13.5
25.4
26.9
38.7
40.9
49.6
52.6
77.5
82.0
104.1
110.2
124.9
132.2
203.3
215.3
321.3
340.2
440.8
466.7
670.0
720.0
9.3
9.8
14.5
15.4
22.8
24.2
36.2
38.5
57.9
61.5
76.5
81.4
90.4
96.1
121.7
129.4
148.2
157.5
167.3
177.8
231.5
246.1
325.2
345.7
401.5
426.8
580.0
675.0
2.1
2.2
4.0
4.4
8.2
8.7
16.6
17.6
33.0
35.0
50.2
53.2
64.5
68.3
100.7
106.6
135.3
143.3
162.3
171.9
264.3
279.8
417.7
442.3
573.0
606.7
850.0
900.0
10.7
11.4
16.7
17.7
26.3
28.0
42.0
44.6
66.8
71.0
88.3
93.9
104.3
110.9
140.4
149.3
171.0
181.7
193.0
205.2
267.1
283.9
375.2
398.9
463.3
492.5
680.0
700.0
1.8
2.0
3.6
3.9
7.3
7.7
14.8
15.6
29.3
31.0
44.6
47.2
57.3
60.6
89.4
94.7
120.1
127.2
144.1
152.5
234.6
248.4
370.0
392.5
508.6
538.5
732.0
800.0
52.5%
55%
52.5%
55%
55%
55%
55%
55%
55%
55%
55%
55%
55%
55%
55%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
52.5%
55%
DC 400H
DC 500H
DC 630H
DC 800H
DC 1000H
DC 1150H
DC 1250H
DC 1450H
DC 1600H
DC 1700H
DC 2000H
DC 2250H
DC 2500H
DC 3000H
MO
DEL N
O.
DEFLEC
TIO
N
12.0
12.8
18.8
20.0
29.6
31.5
47.3
50.3
75.2
80.0
99.5
105.8
117.6
125.0
158.2
168.2
192.6
204.7
217.4
231.1
300.0
319.9
422.8
449.4
522.0
554.9
720.0
750.0
R1.0 R1.1 R1.2 R1.3 R2.0 R2.1 R2.2 R2.3 R3.0 R3.1 R3.2 R3.3 R4.0
R4.1 R4.2 R4.3 R5.0 R5.1
7.1
7.6
11.1
11.8
17.5
18.6
28.0
29.8
44.5
47.3
58.9
62.6
69.6
73.9
93.6
99.5
114.0
121.2
128.7
136.8
178.1
189.3
250.2
265.9
308.8
328.3
440.0
520.0
11.7
12.5
18.3
19.4
28.8
30.6
46.0
48.9
73.1
77.8
96.7
102.8
114.3
121.5
153.8
163.5
187.2
199.0
211.3
224.6
291.8
310.9
410.9
436.8
507.3
539.1
710
737.5
2.0
2.2
3.9
4.3
8.0
8.5
16.2
17.1
32.1
34.0
48.8
51.7
62.7
66.4
97.9
103.6
131.5
139.3
157.8
167.1
256.9
272.0
405.8
429.9
556.9
589.7
820.5
875.0
11.4
12.1
17.8
18.9
28
29.8
44.7
47.5
71
75.5
93.9
99.9
111
118.0
149.3
158.8
181.8
193.2
205.2
218.2
283.6
301.9
399
424.2
492.7
523.6
700
725.0
2.0
2.1
3.8
4.2
7.8
8.2
15.7
16.6
31.2
33.0
47.4
50.2
60.9
64.5
95.1
100.7
127.7
135.3
153.2
162.2
249.5
264.1
393.9
417.4
540.8
572.6
791.0
850.0
11
12
17
18
27
29
43
46
69
73
91
97
108
114
145
154
176
187
199
212
275
293
387
412
478
508
690
713
1.9
2.1
3.7
4.0
7.5
8.0
15.3
16.1
30.2
32.0
46.0
48.7
59.1
62.5
92.2
97.7
123.9
131.2
148.7
157.4
242.0
256.3
381.9
405.0
524.7
555.6
761.5
825.0
10.4
11.0
16.2
17.1
25.4
27.1
40.6
43.1
64.6
68.6
85.4
90.8
100.8
107.2
135.7
144.3
165.3
175.7
186.6
198.4
258.2
274.5
362.7
385.6
447.9
476.1
655.0
693.8
1.8
1.9
3.5
3.8
7.1
7.5
14.3
15.1
28.3
30.0
43.1
45.6
55.4
58.6
86.4
91.5
116.1
123.0
139.3
147.4
226.8
240.1
357.8
379.4
491.7
520.6
716.5
780.0
10
11
16
17
25
26
39
42
62
66
82
88
97
104
131
139
160
170
180
192
249
265
350
372
432
460
630
688
1.7
1.9
3.4
3.7
6.8
7.2
13.8
14.6
27.4
29.0
41.7
44.1
53.5
56.6
83.5
88.4
112.1
118.7
134.5
142.4
219.0
231.9
345.7
366.4
474.7
502.6
701.0
760.0
9.7
10.2
15.1
16.0
23.7
25.2
37.7
40.0
60.1
63.9
79.5
84.5
93.9
99.8
126.4
134.4
153.9
163.6
173.7
184.7
240.4
255.6
337.7
359.0
417.0
443.2
605.0
681.3
1.7
1.8
3.2
3.5
6.6
7.0
13.2
14.0
26.4
27.9
40.2
42.5
51.5
54.6
80.5
85.2
108.1
114.5
129.7
137.3
211.1
223.6
333.5
353.3
457.8
484.7
685.5
740.0
8.8
9.3
13.7
14.5
21.5
22.8
34.2
36.3
54.6
58.0
72.1
76.7
85.2
90.6
114.7
121.9
139.7
148.4
157.7
167.6
218.2
231.9
306.5
325.8
378.3
402.2
545.0
636.3
1.5
1.6
2.9
3.2
5.9
6.3
12.0
12.7
23.9
25.4
36.5
38.6
46.8
49.6
73.0
77.3
98.1
103.8
117.7
124.6
191.6
202.9
302.8
320.6
415.4
439.8
630.0
676.3
8.2
8.7
12.8
13.6
20.2
21.4
32.1
34.2
51.2
54.4
67.7
72.0
80.0
85.0
107.7
114.5
131.1
139.4
148.0
157.3
204.8
217.7
287.7
305.8
355.2
377.6
510.0
597.5
1.4
1.5
2.8
3.0
5.6
5.9
11.3
12.0
22.5
23.8
34.2
36.2
43.9
46.5
68.6
72.6
92.1
97.3
110.5
117.0
179.9
190.5
284.3
301.0
390.0
412.9
590.0
632.5
7.7
8.2
12.0
12.7
18.8
20.0
30.1
32.0
47.9
50.9
63.3
67.3
74.8
79.5
100.6
107.0
122.6
130.3
138.4
147.1
191.5
203.5
269.0
285.9
332.0
352.9
475.0
558.8
1.3
1.4
2.6
2.8
5.2
5.5
10.5
11.2
21.0
22.3
32.0
33.9
41.1
43.5
64.1
67.8
86.1
90.9
103.2
109.3
168.1
178.0
265.7
281.3
364.5
385.9
550.0
588.8
6.8
7.2
10.6
11.2
16.6
17.7
26.4
28.1
42.3
45.0
56.0
59.5
66.1
70.2
88.9
94.5
108.3
115.1
122.3
130.0
169.2
179.8
240.8
255.9
297.2
316.0
423.8
500.0
1.2
1.3
2.3
2.5
4.6
4.9
9.3
9.8
18.5
19.7
28.2
29.9
36.3
38.4
56.6
60.0
76.1
80.3
91.2
96.6
148.6
157.3
237.9
251.9
326.4
345.5
490.0
522.8
6.4
6.9
10.0
10.7
15.8
16.8
24.8
26.4
40.1
42.6
53.0
56.4
62.6
66.6
84.3
89.6
102.6
108.9
115.8
123.1
160.3
170.4
231.4
246.0
285.7
303.7
407.5
480.0
1.1
1.2
2.2
2.4
4.4
4.6
8.7
9.2
17.6
18.7
26.8
28.4
34.4
36.4
53.7
56.8
72.1
76.1
86.4
91.6
140.8
149.1
228.7
242.1
313.7
332.1
470.0
500.5
6.1
6.5
9.5
10.1
14.9
15.8
23.1
24.6
37.8
40.3
50.1
53.2
59.1
62.9
79.6
84.6
96.9
102.8
109.4
116.3
151.4
160.9
222.0
236.0
274.1
291.4
391.3
460.0
1.1
1.2
2.0
2.2
4.1
4.4
8.2
8.6
16.6
17.6
25.3
26.8
32.4
34.3
50.7
53.7
68.1
72.0
81.6
86.5
132.9
140.8
219.4
232.2
300.9
318.6
450.0
478.3
5.2
5.5
8
8.5
12.6
13.4
19.4
20.6
32
33.9
42.5
46.5
50
53.0
67.4
71.4
82.1
87.0
92.5
98.1
128.2
135.9
191.2
202.7
236.2
250.4
337.4
357.6
0.89
1.0
1.7
1.8
3.5
3.7
6.8
7.2
14
14.8
21.4
22.7
27.4
29.0
42.9
45.5
57.7
61.2
69.1
73.2
112.5
119.3
189
200.3
259.3
274.9
386.8
410.0
R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E
(T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T)
E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M) R
(T) E (T-M) R (T) E (T-M) R (T) E (T-M) R (T) E (T-M)
-
28 www.irmome.com
DIPTI CONE FENDERS DCN SERIES
G
F
BD
H
EC
A
Y
T
DETAIL Y
THE PERFORMANCE AND WEIGHT VALUES MENTIONED ARE SUBJECT TO
CHANGE WITHOUT NOTICE.
O
DIMENSION TABLE
DCN 300H 300 500 295 440 4 X M204 X M20 35
45
75
145
195
250
400
610
850
1125
1365
1550
1975
2460
3110
4650
6620
9560
150 15
150 15
175 20
175 25
175 25
225 30
225 35
225 35
225 35
275 35
275 40
275 40
325 40
375 40
375 50
375 60
440 60
440 90
4 X M204 X M20
4 X M244 X M24
4 X M244 X M24
![[RUBBER MARINE FENDERS] (εισηγμένη)shipsafemarine.com/.../04/RUBBER-MARINE-FENDERS.pdf · a testing protocol compliant with the PIANC 2002 Guidelines for the Design of Fender](https://img.dokumen.tips/doc/110x75/608bf9db28e1a2171262255c/rubber-marine-fenders-f-a-testing-protocol-compliant-with-the.jpg)
![Bridgestone Marine Fender Ver1.9[1]](https://img.dokumen.tips/doc/110x75/55326ae35503467e208b45c9/bridgestone-marine-fender-ver191.jpg)