Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Zhafi
r Zere
s Series
Zhafir Partner:
ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8-1092263 EbermannsdorfGermanyTel. +49-9438-9412-0Fax. +49-9438-9412-150E-Mail: [email protected]
NINGBO ZHAFIR PLASTICS MACHINERY CO., LTDNo. 98 Guanhai Road, Chunxiao, Beilun, Ningbo, China 315800Tel. +86-574-86182986Fax. +86-574-86182977E-Mail: [email protected]
ZE 2
0160
224-
IV
Specifications / International400-6500kN
3563
24
14
14
11
A-A70210
12×M12 L25
Ø60
140
210
280
350
80h,80
(80h,80)
mounting plane of fixed platen
top plane of fixed platen
Technical data ZE400
Platen dimensions ZE400
Machine dimensions ZE400
2 3
ZE400400
235
150
320
555
320×280
205×180
60
9.8(1.0)
460×440
A B C
19 22 26
20 20 17
21 36 50
19.1 32.8 45.5
400
3.8 6.0 8.8
9.8(1.0)
4.1 5.0 5.0
80 200
50 68 96
260 220 157
2600 2200 1570
208 175 125
2080 1750 1250
80h 350
90 121 169
260 220 157
2600 2200 1570
208 175 125
2080 1750 1250
80:12/21.4 80h:19/34
14
23
45
15
3.62×1.2×1.75
2.8
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
120h,120
(120h,120)
80h,80
(80h,80)
mounting plane of fixed platen
top plane of fixed platen
Technical data ZE600
Platen dimensions ZE600
Machine dimensions ZE600
unit: mm
unit: mm
4 5
ZE600600
270
150
370
640
370×320
240×205
70
19.6(2.0)
545×505
80:12/21.4 120:15.1/27 80h:19/34 120h:25/44.7
14 14
31 31
68 68
15 15
4.01×1.22×1.8 4.01×1.22×1.8
3.3 3.5
A B C A B C
19 22 26 22 26 30
20 20 17 20 20 17.4
21 36 50 36 58 78
19.1 32.8 45.5 33 52 70
400 400
3.8 6.0 8.8 6.0 8.8 13
14.7(1.5) 14.7(1.5)
4.1 5.0 5.0 5.3 6.8 6.8
80 120 200 200
50 68 96 69 96 128
260 220 157 280 220 165
2600 2200 1570 2800 2200 1650
208 175 125 220 160 120
2080 1750 1250 2200 1600 1200
80h 120h 350 350
90 121 169 121 169 225
260 220 157 280 220 165
2600 2200 1570 2800 2200 1650
208 175 125 220 160 120
2080 1750 1250 2200 1600 1200
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
A B C A B C AA A B C
22 26 30 26 28 30 26 28 32 36
20 20 17.4 21 21 19.6 21 21 21 18.6
36 58 78 58 67 78 61 70 100 127
33 52 70 52 61 70 55 64 91 116
400 400 400
6.0 8.8 13 8.8 11 13 8.8 11 16 22
19.6(2.0) 19.6(2.0) 19.6(2.0)
5.3 6.8 6.8 6.8 7.8 7.8 5.4 7.5 8.0 8.0
120 160 210 200 200 200
69 96 128 96 112 128 96 112 146 185
280 220 165 260 220 192 280 260 200 160
2800 2200 1650 2600 2200 1920 2800 2600 2000 1600
220 160 120 160 138 120 224 206 160 126
2200 1600 1200 1600 1380 1200 2240 2060 1600 1260
120h 160h 210h 350 350 350
121 169 225 169 196 225 169 196 256 324
280 220 165 260 220 192 280 260 200 160
2800 2200 1650 2600 2200 1920 2800 2600 2000 1600
220 160 120 160 138 120 224 206 160 126
2200 1600 1200 1600 1380 1200 2240 2060 1600 1260
120:15.1/27 160:17.5/31 210:20/37 120h:25/44.7 160h:28/50 210h:31/55
14 14 14
31 31 31
68 68 68
15 15 25
4.24×1.29×1.91 4.24×1.29×1.91 4.33×1.29×1.91
4.2 4.3 4.4
210h,210
(210h,210)
160h,160
(160h,160)
120h,120
(120h,120)
mounting plane of fixed platen
top plane of fixed platen
Technical data ZE900
Platen dimensions ZE900
Machine dimensions ZE900
unit: mm
unit: mm
6 7
ZE900900
320
150
410
730
420×370
270×240
80
19.6(2.0)
615×570
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
210:20/37 300:25.7/46 430:32.3/57 210h:31/55 300h:36.7/65 430h:43.3/77
14 14 14
52 52 52
105 105 105
25 25 25
4.85×1.36×1.99 4.93×1.36×1.99 5.24×1.36×1.99
5.5 5.6 6
AA A B C AA A B C A B C
26 28 32 36 30 32 36 40 36 40 45
21 21 21 18.6 21 22.5 20 18 23.3 21 18.7
61 70 100 127 102 116 147 182 173 213 270
55 64 91 116 92 106 134 166 157 194 246
400 400 400
8.8 11 16 22 12.8 16 22 30 22 30 42
24.5(2.5) 24.5(2.5) 24.5(2.5)
5.4 7.5 8.0 8.0 7.7 9.9 9.9 9.9 12.6
210 300 430 200 200 200
96 112 146 185 128 146 184 228 184 228 289
280 260 200 160 280 253 200 162 247 200 158
2800 2600 2000 1600 2800 2530 2000 1620 2470 2000 1580
224 206 160 126 224 202 160 130 197 160 126
2240 2060 1600 1260 2240 2020 1600 1300 1970 1600 1260
210h 300h 430h 350 300 300
169 196 256 324 193 220 277 342 277 342 434
280 260 200 160 280 253 200 162 247 200 158
2800 2600 2000 1600 2800 2530 2000 1620 2470 2000 1580
224 206 160 126 224 202 160 130 197 160 126
2240 2060 1600 1260 2240 2020 1600 1300 1970 1600 1260
300h,300
(300h,300)
210h,210
(210h,210)
160h,160
(160h,160)
mounting plane of fixed platen
top plane of fixed platen
Technical data ZE1200
Platen dimensions ZE1200
Machine dimensions ZE1200
unit: mm
unit: mm
8 9
ZE12001200
360
150
480
840
470×420
305×270
100
29.4(3.0)
690×640
A B C
26 28 30
21 21 19.6
58 67 78
52 61 70
400
8.8 11 13
24.5(2.5)
6.8 7.8 7.8
160 200
96 112 128
260 220 192
2600 2200 1920
160 138 120
1600 1380 1200
160h 350
169 196 225
260 220 192
2600 2200 1920
160 138 120
1600 1380 1200
160:17.5/31160h:28/50
14
52
105
15
4.85×1.36×1.99
5.4
Note:The above machine size does not apply to the 430 injection unit.
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
A B C AA A B C A B C A B C
28 32 36 30 32 36 40 36 40 45 40 45 50
21 21 18.6 21 22.5 20 18 23.3 21 18.7 22.5 20 18
70 100 127 102 116 147 182 173 213 270 252 319 395
64 91 116 92 106 134 166 157 194 246 229 290 358
400 400 400 350
11 16 22 12.8 16 22 30 22 30 42 27 39 50
19.6(2.0) 29.4(3.0) 29.4(3.0) 29.4(3.0)
7.5 8.0 8.0 7.7 9.9 9.9 9.9 12.6 14.2
210 300 430 640 200 200 200 160
112 146 185 128 146 184 228 184 228 289 183 231 285
260 200 160 280 253 200 162 247 200 158 253 200 162
2600 2000 1600 2800 2530 2000 1620 2470 2000 1580 2530 2000 1620
206 160 126 224 202 160 130 197 160 126 202 160 130
2060 1600 1260 2240 2020 1600 1300 1970 1600 1260 2020 1600 1300
210h 300h 430h 640h 350 300 300 250
196 256 324 193 220 277 342 277 342 434 285 360 445
260 200 160 280 253 200 162 247 200 158 253 200 162
2600 2000 1600 2800 2530 2000 1620 2470 2000 1580 2530 2000 1620
206 160 126 224 202 160 130 197 160 126 202 160 130
2060 1600 1260 2240 2020 1600 1300 1970 1600 1260 2020 1600 1300
430h,430
(430h,430)
300h,300
(300h,300)
210h,210
(210h,210)
mounting plane of fixed platen
top plane of fixed platen
Technical data ZE1500
Platen dimensions ZE1500
Machine dimensions ZE1500
unit: mm
unit: mm
10 11
ZE15001500
420
180
520
940
520×470
335×305
120
34.3(3.5)
770×730
210:20/37 300:25.7/46 430:32.3/57 640:39/69 210h:31/55 300h:36.7/65 430h:43.3/77 640h:57/101
14 14 14 14
52 52 52 52
105 105 105 105
25 25 25 25
5.14×1.46×2.08 5.16×1.46×2.08 5.47×1.46×2.08 5.67×1.46×2.08
7 7.1 7.3 7.7
Note:The above machine size does not apply to the 640 injection unit.
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
A B C A B C A B C A B C
32 36 40 36 40 45 40 45 50 45 50 55
22.5 20 18 23.3 21 18.7 22.5 20 18 22.2 20 18
116 147 182 173 213 270 252 319 395 334 412 499
106 134 166 157 194 246 229 290 358 304 375 454
400 400 350 320
16 22 30 22 30 42 27 39 50 35 46 60
24.5(2.5) 39.2(4.0) 39.2(4.0) 39.2(4.0)
9.9 9.9 9.9 12.6 14.2 19
300 430 640 830 200 200 160 160
146 184 228 184 228 289 183 231 285 231 285 346
253 200 162 247 200 158 253 200 162 247 200 165
2530 2000 1620 2470 2000 1580 2530 2000 1620 2470 2000 1650
202 160 130 197 160 126 202 160 130 197 160 132
2020 1600 1300 1970 1600 1260 2020 1600 1300 1970 1600 1320
300h 430h 640h 830h 300 300 250 250
220 277 342 277 342 434 285 360 445 362 446 594
253 200 162 247 200 158 253 200 162 247 200 165
2530 2000 1620 2470 2000 1580 2530 2000 1620 2470 2000 1650
202 160 130 197 160 126 202 160 130 197 160 132
2020 1600 1300 1970 1600 1260 2020 1600 1300 1970 1600 1320
300:25.7/46 430:32.3/57 640:39/69 830:47.5/85 300h:36.7/65 430h:43.3/77 640h:57/101 830h:65/116
14 14 14 14
70 70 70 70
135 135 135 135
25 25 25 50
5.77×1.57×2.18 5.77×1.57×2.18 5.98×1.57×2.18 6.19×1.57×2.18
8.5 8.7 8.9 9.3
640h,640
(640h,640)
430h,430
(430h,430)
300h,300
(300h,300)
mounting plane of fixed platen
top plane of fixed platen
Technical data ZE1900
Platen dimensions ZE1900
Machine dimensions ZE1900 unit: mm
12 13
unit: mm
ZE19001900
470
200
550
1020
570×520
370×335
130
44.1(4.5)
840×790
Note:The above machine size does not apply to the 830 injection unit.
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
A B C A B C A B C A B C
36 40 45 40 45 50 45 50 55 50 55 60
23.3 21 18.7 22.5 20 18 22.2 20 18 22 20 18.3
173 213 270 252 319 395 334 412 499 471 570 678
157 194 246 229 290 358 304 375 454 428 518 617
400 350 320 320
22 30 42 27 39 50 35 46 60 46 60 71
29.4(3.0) 49(5.0) 49(5.0) 54(5.5)
12.6 14.2 19 23.4
430 640 830 1100 200 160 160 160
184 228 289 183 231 285 231 285 346 285 346 411
247 200 158 253 200 162 247 200 165 218 180 151
2470 2000 1580 2530 2000 1620 2470 2000 1650 2180 1800 1510
197 160 126 202 160 130 197 160 132 194 160 134
1970 1600 1260 2020 1600 1300 1970 1600 1320 1940 1600 1340
430h 640h 830h 1100h 300 250 250 250
277 342 434 285 360 445 362 446 594 446 540 642
247 200 158 253 200 162 247 200 165 218 180 151
2470 2000 1580 2530 2000 1620 2470 2000 1650 2180 1800 1510
197 160 126 202 160 130 197 160 132 194 160 134
1970 1600 1260 2020 1600 1300 1970 1600 1320 1940 1600 1340
430:32.3/57 640:39/69 830:47.5/85 1100:51/92 430h:43.3/77 640h:57/101 830h:65/116 1100h:73.2/130
14 14 14 14
80 80 80 80
135 135 135 135
25 25 50 50
6.4×1.73×2.3 6.4×1.73×2.3 6.43×1.73×2.3 6.77×1.73×2.3
11.3 11.5 11.8 12.6
36
25
22
16
100
100400
400
140
280
420
560
700
140280420560700
12×Ø38
36×M20 L45
A-A
Ø100
Ø200
(830h,830)(640h,640)(430h,430)
830h,830640h,640430h,430
mounting plane of fixed platen
top plane of fixed platen
Technical data ZE2300
Platen dimensions ZE2300
Machine dimensions ZE2300
unit: mm
unit: mm
14 15
ZE23002300
550
220
600
1150
620×620
400×400
150
49(5.0)
920×920
Note:The above machine size does not apply to the 1100 injection unit.
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
A B C A B C A B C A B C
45 50 55 50 55 60 55 60 65 60 65 70
22.2 20 18 22 20 18.3 21.8 20 18.5 21.6 20 18.6
334 412 499 471 570 678 617 735 863 792 929 1078
304 375 454 428 518 617 562 668 785 720 845 980
320 320 300 250
35 46 60 46 60 71 56 70 81 60 70 85
54 (5.5) 54 (5.5) 54 (5.5) 54 (5.5)
19 23.4 27.8 32
830 1100 1400 1700
160 160 160 160
231 285 346 285 346 411 346 411 483 411 483 560
247 200 165 218 180 151 214 180 153 210 180 155
2470 2000 1650 2180 1800 1510 2140 1800 1530 2100 1800 1550
197 160 132 194 160 134 190 160 136 187 160 138
1970 1600 1320 1940 1600 1340 1900 1600 1360 1870 1600 1380
830h 1100h 1400h 1700h
250 250 250 250
362 446 594 446 540 642 540 642 754 642 754 875
247 200 165 218 180 151 214 180 153 210 180 155
2470 2000 1650 2180 1800 1510 2140 1800 1530 2100 1800 1550
197 160 132 194 160 134 190 160 136 187 160 138
1970 1600 1320 1940 1600 1340 1900 1600 1360 1870 1600 1380
830:47.5/85 1100:51/92 1400:56/101 1700:72/129 830h:65/116 1100h:73.2/130 1400h:76.8/138 1700h:95/168
14 14 14 14
100 100 100 100
145 145 145 145
50 50 50 50
7.14×1.99×2.37 7.14×1.99×2.37 7.32×1.99×2.37 7.53×1.99×2.37
14.8 15.4 16.2 16.3
16 17
ZE3000
3000
600
240
650
1250
720×720
470×470
150
58.8 (6.0)
1040×1040
Technical data ZE3000Machine dimensions ZE3000
Platen dimensions ZE3000
unit: mm
unit: mm
Note:The above machine size does not apply to the 1700h and 1700 injection unit.
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
A B C A B C A B C A B C
50 55 60 55 60 65 60 65 70 65 70 80
22 20 18.3 21.8 20 18.5 21.6 20 18.6 21.5 20 17.5
471 570 678 617 735 863 792 929 1078 1068 1239 1619
428 518 617 562 668 785 720 845 980 972 1127 1473
320 300 250 210
46 60 71 56 70 81 60 70 85 60 80 105
54 (5.5) 54 (5.5) 54 (5.5) 63.7 (6.5)
23.4 27.8 32 38
1100 1400 1700 2250
160 160 160 160
285 346 411 346 411 483 411 483 560 483 560 731
218 180 151 214 180 153 210 180 155 210 180 138
2180 1800 1510 2140 1800 1530 2100 1800 1550 2100 1800 1380
194 160 134 190 160 136 187 160 138 190 162 124
1940 1600 1340 1900 1600 1360 1870 1600 1380 1900 1620 1240
1100h 1400h 1700h --
250 250 250 --
446 540 642 540 642 754 642 754 875 -- -- --
218 180 151 214 180 153 210 180 155 -- -- --
2180 1800 1510 2140 1800 1530 2100 1800 1550 -- -- --
194 160 134 190 160 136 187 160 138 -- -- --
1940 1600 1340 1900 1600 1360 1870 1600 1380 -- -- --
1100:51/92 1400:56/101 1700:72/129 2250:82/147 1100h:73.2/130 1400h:76.8/138 1700h:95/168 --
14 14 14 14
100 100 100 100
145 145 145 145
50 50 50 50
7.64×2.1×2.44 7.65×2.1×2.44 7.86×2.1×2.44 8.32×2.1×2.44
18.2 19 19.1 21
ZE3600
3600
700
250
710
1410
820×820
540×540
160
58.8 (6.0)
1150×1150
180
( 1100h, 1100 )
60
115
115
4xM10 L20166
( 1400h,1400 )
80
115
115
4xM10 L20217
( 1700h,1700 )
80
115
115700
40
3514
0
980
4xM10 L20
D
700 250-710
50
I J
mounting plane of fixed platen
top plane of fixed platen
36
25
22
16
100
150
400
100400700
280
420
560
700
840
980
280420560700840980
4×Ø58
12×Ø38
52×M20 L45
A-A
Ø200
Ø120
254
2554130
1547 77914727638
15691569 1371714 1300 4176
EF
GH
105-
130
3437 CBA
D
2144
292
1676
190
1017 1083
46211661366
1973
1700h,1700 7858 1518 2333 570 1388 248 2084 2237 ø200 ø3 1400h,1400 7644 1356 2281 570 1388 248 2084 2237 ø200 ø3 1100h,1100 7363 1271 2085 570 1388 243 2006 2032 ø200 ø3
A B C D E F G H I J
18 19
Technical data ZE3600Machine dimensions ZE3600
Platen dimensions ZE3600
unit: mm
unit: mm
Note:The above machine size does not apply to the 2250 injection unit.
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
A B C A B C A B C
60 65 70 65 70 80 75 80 90
21.6 20 18.6 21.5 20 17.5 21.3 20 17.8
792 929 1078 1068 1239 1619 1634 1860 2354
720 845 980 972 1127 1473 1487 1693 2142
250 210 185
60 70 85 60 80 105 80 90 110
54 (5.5) 63.7 (6.5) 63.7 (6.5)
32 38 42
1700 2250 3350
160 160 160
411 483 560 483 560 731 643 731 926
210 180 155 210 180 138 205 180 142
2100 1800 1550 2100 1800 1380 2050 1800 1420
187 160 138 190 162 124 185 162 128
1870 1600 1380 1900 1620 1240 1850 1620 1280
1700h -- --
250 -- --
642 754 875 -- -- -- -- -- --
210 180 155 -- -- -- -- -- --
2100 1800 1550 -- -- -- -- -- --
187 160 138 -- -- -- -- -- --
1870 1600 1380 -- -- -- -- -- --
20 21
ZE4500
4500
800
350
800
1600
870×870
570×570
180
98 (10.0)
1270×1270
1700:72/129 2250:82/147 3350:111/198 1700h:95/168 -- --
14 14 14
158 158 158
300 300 300
50 50 100
9.29×2.25×2.38 9.29×2.25×2.38 9.47×2.25×2.4
25.9 26.4 28.1
A B C
55 60 65
21.8 20 18.5
617 735 863
562 668 785
300
56 70 81
54 (5.5)
27.8
1400
160
346 411 483
214 180 153
2140 1800 1530
190 160 136
1900 1600 1360
1400h
250
540 642 754
214 180 153
2140 1800 1530
190 160 136
1900 1600 1360
1400:56/1011400h:76.8/138
14
158
300
50
9.29×2.25×2.38
25.8
Technical data ZE4500Machine dimensions ZE4500
Platen dimensions ZE4500
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
A B C A B C
65 70 80 75 80 90
21.5 20 17.5 21.3 20 17.8
1068 1239 1619 1634 1860 2354
972 1127 1473 1487 1693 2142
210 185
60 80 105 80 90 110
63.7 (6.5) 63.7 (6.5)
38 42
2250 3350
160 160
483 560 731 643 731 926
210 180 138 205 180 142
2100 1800 1380 2050 1800 1420
190 162 124 185 162 128
1900 1620 1240 1850 1620 1280
-- --
-- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
22 23
ZE5500
5500
900
380
880
1780
970×970
630×630
180
137.2 (14.0)
1400×1400
2250:82/147 3350:111/198 -- --
14 14
210 210
335 335
50 100
9.72×2.44×2.5 9.85×2.44×2.5
31.9 33.6
A B C
55 60 65
21.8 20 18.5
617 735 863
562 668 785
300
56 70 81
54 (5.5)
27.8
1400
160
346 411 483
214 180 153
2140 1800 1530
190 160 136
1900 1600 1360
1400h
250
540 642 754
214 180 153
2140 1800 1530
190 160 136
1900 1600 1360
1400:56/1011400h:76.8/138
14
210
335
50
9.72×2.44×2.5
31.3
A B C
60 65 70
21.6 20 18.6
792 929 1078
720 845 980
250
60 70 85
54 (5.5)
32
1700
160
411 483 560
210 180 155
2100 1800 1550
187 160 138
1870 1600 1380
1700h
250
642 754 875
210 180 155
2100 1800 1550
187 160 138
1870 1600 1380
1700:72/129 1700h:95/168
14
210
335
50
9.72×2.44×2.5
31.4
Technical data ZE5500Machine dimensions ZE5500
Platen dimensions ZE5500
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
mounting plane of fixed platen
top plane of fixed platen
D
350490630770910105011901330
350
490
630
770
910
1050
1190
1330
700400150100
1000 420-1000
50
I J
12
552476
588700
400
150
100
120
46
32
28
20
A-A
( 1700h,1700 )
170
170
10618
718 718 718 718 718 633 632 1505 1768640350
720
EF
GH
4817 CBA
D
2292
298
1652
185
13301252
67716001800
2232
A B C D E F G H I J L3350 10262 1811 2914 720 1457 307 1927 2758 ø250 ø4 SR152250 9693 1607 2549 720 1457 270 1887 2419 ø250 ø4 SR151700h,1700 9308 1518 2333 640 1457 248 2152 2286 ø250 ø3 SR10
147 105-1
30
840
12XM24 L48
7010
5105
1260
24 25
Technical data ZE6500Machine dimensions ZE6500
Platen dimensions ZE6500
unit: mm
unit: mm
A B C A B C
65 70 80 75 80 90
21.5 20 17.5 21.3 20 17.8
1068 1239 1619 1634 1860 2354
972 1127 1473 1487 1693 2142
210 185
60 80 105 80 90 110
63.7(6.5) 63.7(6.5)
38 42
2250 3350 160 160
483 560 731 643 731 926
210 180 138 205 180 142
2100 1800 1380 2050 1800 1420
190 162 124 185 162 128
1900 1620 1240 1850 1620 1280
-- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
ZE65006500
1000
420
1000
2000
1080×1080
700×700
200
196(20.0)
1550×1550
2250:82/147 3350:111/198 -- --
14 14
290 290
435 435
50 100
10.62×2.58×2.64 10.62×2.58×2.76
37.3 39
A B C
60 65 70
21.6 20 18.6
792 929 1078
720 845 980
250
60 70 85
54(5.5)
32
1700
160
411 483 560
210 180 155
2100 1800 1550
187 160 138
1870 1600 1380
1700h 250
642 754 875
210 180 155
2100 1800 1550
187 160 138
1870 1600 1380
1700:72/129 1700h:95/168
14
290
435
50
10.62×2.58×2.88
36.8
Injection pressure
Holding pressure
Injection pressure
Holding pressure
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Pressure Mpa
Flow L/min
Oil tank L
Hopper capacity L
Machine dimension m
Machine weight t
We reserve the right to make changes as a result of further technical advantages.
26 27
Platen Layout ZE400 Platen Layout ZE600European version
Fixed platen Movable platenunit: mm European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm Japanese versionFixed platen Movable platen
unit: mm
24
14
14
11
A-A
24×M12 L25
140210280350420
140
210
280
350
Ø60
Ø100 L20
24×M12 L25
140210280350420
140
210
280
350
Ø100
177.8
Ø60
Ø101.6 L20
2×Ø32
152.
425
435
5.6
152.4254
355.6406.4
32× / ”-13UNC×1“12
Ø101.6
152.
425
435
5.6
152.4254
355.6406.4
32× / ”-13UNC×1“12
100150200250300350400
100
150
200
250
300
350
52×M12 L25
Ø60
100150200250300350400
100
150
200
250
300
350
52×M12 L25
Ø60
30
19
18
14
A-A
Ø80
4XØ30
Ø177.8
Ø100 L20
140210280350420490
140
210
280
350
420
28×M16 L35
Ø100
140210280350420490
140
210
280
350
420
28×M16 L35
Ø101.6
Ø177.8
4×Ø30
152.
425
435
5.6
431.
8
152.4254
355.6431.8
44× / ”-11UNC×1 / “58
14
Ø101.6
152.
425
435
5.6
431.
8
152.4254
355.6431.8
44× / ”-11UNC×1 / “58
14
100150200250300350400
100
150
200
250
300
350
400
Ø100
Ø2004×Ø30
60×M16 L35
100150200250300350400
100
150
200
250
300
350
400
Ø100
60×M16 L35
30
19
18
14
A-A
140
210
280
350
420
490
140210280350420490
60×M16 L35
Ø125
140
210
280
350
420
490
140210280350420490
60×M16 L35
Ø80
4XØ30
Ø177.8
Ø125 L20
Ø101.6
Ø177.84×Ø30
152.4254
355.6457.2
152.
425
435
5.6
457.
2
44× / ”-11UNC×1 / “58
14
Ø101.6
152.4254
355.6457.2
152.
425
435
5.6
457.
2
44× / ”-11UNC×1 / “58
14
60×M16 L35
Ø2004×Ø30
150250350450500
150
250
350
450
500
Ø100
60×M16 L35
150250350450500
150
250
350
450
500
Ø100
28 29
Platen Layout ZE900 Platen Layout ZE1200European version
Fixed platen Movable platenunit: mm European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm Japanese versionFixed platen Movable platen
unit: mm
30
19
18
14
A-A
32×M16 L35
140
210
350
420
490
560
140210350420490560
Ø125
32×M16 L35
140
210
350
420
490
560
140210350420490560
Ø100
4XØ30
Ø177.8
Ø125 L20
52× / ”-11UNC×1 / “58
14
Ø101.6
Ø177.8
4×Ø30
152.
425
435
5.6
508
152.4254
355.6508
52× / ”-11UNC×1 / “58
14
Ø101.6 152.
425
435
5.6
508
152.4254
355.6508
Ø100
Ø200
4×Ø32
72×M16 L35
150250350450500
150
250
350
450
500
Ø100
72×M16 L35
150250350450500
150
250
350
450
500
140
280
350
420
490
560
630
140280350420490560630
48×M16 L35
30
19
18
14
A-A
140
280
350
420
490
560
630
140280350420490560630
48×M16 L35
Ø160
Ø100
Ø177.8
Ø160 L20
4XØ32
64× / ”-11UNC×1 / “58
14
8×Ø32
Ø101.6
Ø177.8
152.
425
435
5.6
508
660.
4
254
406.4
152.4
101.
6
355.6508
660.4
64× / ”-11UNC×1 / “58
14
Ø101.6
152.
425
435
5.6
508
660.
4
254152.4
355.6508
660.4
4×Ø32
68×M16 L35
Ø100
Ø200
150250350500650
150
250
350
500
600
68×M16 L35
Ø100
150250350500650
150
250
350
500
600
30 31
Platen Layout ZE1500 Platen Layout ZE1900European version
Fixed platen Movable platenunit: mm European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm Japanese versionFixed platen Movable platen
unit: mm
30
19
18
14
140
280
420
560
700
140280
406.4
420560700
40×M16 L35
A-A
8×Ø38
101.
6
140
280
420
560
700
140280420560700
40×M16 L35
Ø160
Ø100
Ø177.8
Ø160 L20
101.
6
406.4
355.6254
152.4
508660.4
355.
625
415
2.4
508
660.
4
8×Ø40
68× / ”-11UNC×1 / “
Ø101.6
Ø177.8
58
14
355.6254
152.4
508660.4
355.
625
415
2.4
508
660.
4
68× / ”-11UNC×1 / “
Ø101.6
58
14
40072×M16 L35
Ø200
Ø100
8×Ø40
100
150250350500650
150
250
350
500
650
72×M16 L35
Ø120
150250350500650
150
250
350
500
650
406.4
406.
410
1.6
101.6
140
280
420
560
700
140280420560700
12×Ø38
36×M20 L45
140
280
420
560
700
140280420560700
36×M20 L45
Ø160
36
25
22
16
A-A
Ø100
Ø177.8
Ø160 L20
68× / ”-10UNC×1 / “34
12
406.4
406.
410
1.6
101.6
12×Ø38
Ø101.6
Ø177.8
152.
425
435
5.6
508
660.
4
152.4254
355.6508
660.4
68× / ”-10UNC×1 / “34
12
Ø101.6
152.
425
435
5.6
508
660.
4
152.4254
355.6508
660.4
100
100400
400
12×Ø38
92×M16 L35
Ø100
Ø200
150250350500650800
150
250
350
500
650
800
92×M16 L35
Ø120
150250350500650800
150
250
350
500
650
800
32 33
Platen Layout ZE2300European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm
Platen Layout ZE3000European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm
36
25
22
16
101.
640
6.4
101.6406.4
280
420
560
700
840
280420560700840
12×Ø38
28×M20 L45
A-A
280
420
560
700
840
280420560700840
28×M20 L45
Ø160
Ø100
Ø177.8
Ø160 L20
101.
640
6.4
101.6406.4
355.6254
508660.4863.6
355.
625
4
508
660.
486
3.6
12×Ø38
72× / ”-10UNC×1 / “
Ø101.6
Ø177.8
34
12
355.6254
508660.4863.6
355.
625
4
508
660.
486
3.6
72× / ”-10UNC×1 / “
Ø101.6
34
12
100
400
100400
12×Ø38
84×M20 L45
Ø200
150250350500650850
250
350
500
650
850
84×M20 L45
Ø150 Ø120
150250350500650850
250
350
500
650
850
36
25
22
16
101.6
152.
440
6.4
101.6406.4711.2
280
420
560
700
840
980
280420560700840980
4×Ø58
12×Ø38
52×M20 L45
A-A
Ø12028
042
056
070
084
098
0
280420560700840980
52×M20 L45
Ø200 Ø177.8
Ø200 L20
101.
615
2.4
406.
4
101.6406.4711.2
355.6254
508660.4863.61066.8
355.
625
4
508
660.
486
3.6
1066
.8
12×Ø38
112× / ”-10UNC×1 / “
Ø101.6
Ø177.8
4×Ø58
34
12
355.6254
508660.4863.61066.8
355.
625
4
508
660.
486
3.6
1066
.8
112× / ”-10UNC×1 / “
Ø101.6
34
12
100
150
400
100400700
4×Ø58
12×Ø38
112×M20 L45
Ø200
Ø120
250350500650850
1050
250
350
500
650
850
1050
112×M20 L45
Ø150
250350500650850
1050
250
350
500
650
850
1050
34 35
Platen Layout ZE3600 Platen Layout ZE4500European version
Fixed platen Movable platenunit: mm European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm Japanese versionFixed platen Movable platen
unit: mm
36
25
22
16
152.
410
1.6
406.
471
1.2
152.4101.6
406.4711.2
280
420
560
700
840
980
1120
2804205607008409801120
60×M20 L40
A-A
Ø120Ø200 L20
Ø177.8
8×Ø5812×Ø38
280
420
560
700
840
980
1120
2804205607008409801120
60×M20 L40
Ø200
101.
615
2.4
406.
471
1.2
101.6152.4406.4711.2
355.6254
508660.4863.61066.8
355.
625
4
508
660.
486
3.6
1066
.8
12×Ø38
100× / ”-10UNC×1 / “
Ø101.6
Ø177.8
8×Ø583
41
2
355.6254
508660.4863.61066.8
355.
625
4
508
660.
486
3.6
1066
.8
100× / ”-10UNC×1 / “
Ø101.6
34
12
12×Ø38
88×M20 L45
Ø120
Ø200
8×Ø58
150350500650
700400150100
700
400
150
100
8501050
150
350
500
650
850
1050
88×M20 L45
Ø150
1503505006508501050
150
350
500
650
850
1050
Platen Layout ZE6500European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm
152.4 101.6
406.4711.2
152.
410
1.6
406.
471
1.2
280420560700840980112012601400
280
420
560
700
840
980
1120
1260
1400
92×M24 L55
64
32
82
20
A-A
8×Ø58
12×Ø38
92×M24 L55
Ø250
280420560700840980112012601400
280
420
560
700
840
980
1120
1260
1400
Ø120
Ø250 L20
Ø177.8
100
150
400
700
15035050065085010501250
150
350
500
650
850
1050
1250
148xM42 L55
15035050065085010501250
Ø150 150
350
500
650
850
1050
1250
100150400700
Ø120
Ø200
148×M24 L55
12×Ø38
8×Ø58
101.6
152.
440
6.4
711.
2
101.6152.4
406.4711.2
355.6254
508660.4863.61066.81270
355.
625
4
508
660.
486
3.6
1066
.812
70
140×1”-8UNC×2“
Ø127
355.6254
508660.4863.61066.81270
355.
625
4
508
660.
486
3.6
1066
.812
70
140×1”-8UNC×2“
Ø127
Ø177.8
12×Ø38
8×Ø58
36
25
22
16
152.
4101
.6
406.
471
1.2
152.4101.6
406.4711.2
280
420
560
700
840
980
1120
2804205607008409801120
60×M20 L45
A-A
Ø120Ø200 L20
8×Ø5812×Ø38
280
420
560
700
840
980
1120
2804205607008409801120
60×M20 L45
Ø200 Ø177.8
101.
615
2.4
406.
471
1.2
101.6152.4406.4711.2
355.6254
508660.4863.61066.81270
355.
625
4
508
660.
486
3.6
1066
.812
70
12×Ø38
120× / ”-10UNC×1 / “
Ø101.6
Ø177.8
8×Ø58
34
12
355.6254
508660.4863.61066.81270
355.
625
4
508
660.
486
3.6
1066
.812
70
120× / ”-10UNC×1 / “
Ø101.6
34
12
100150400700
100
150
400
700
12×Ø38
Ø120
Ø200
8×Ø58
150350500650850
10501250
150
350
500
650
850
1050
1250
128×M20 L45
Ø150
150350500650850
10501250
150
350
500
650
850
1050
1250
128×M20 L45
36 37
Platen Layout ZE5500European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm
38 39
Standard Equipment List
Injection Unit
» Abrasion-resistant screw unit(open nozzle)
» Nozzle safety guard
» 6 Injection steps
» 4 Pressure holding steps
» 3 Dosing steps
» 3 Back pressure steps
» Screw suck back select(After holding/After dosing)
» Screw suck back delay function
» Injection delay function
» Dosing delay function
» Intrusion/filling by rotating screw
» V/P switch over mode(position,time,pressure,speed)
» Injection speed response mode select
» Injection pressure segment control
» Speed limit during holding pressure
» Screw postion setting(unit: 0.01mm)
» Screw rotation speed setting
» Holding pressure time setting
» Mold open available during dosing
» "Barrel heating closed-loop control
(K/J type available)"
» Barrel temperature holding function
» Barrel temperature auto tunning function
» Barrel pre-heating function
» Barrel temperature synchronous control
» Material overheating prevention function
» Screw cold start prevention
» Auto purge function
» Screw rotation speed display
» Setting for nozzle movement
» Selection of nozzle retract (3 modes)
» Nozzle contact device(adjustable)
» Nozzle centre adjustable
» Feeding throat temperature closed-loop control
» Injection unit swiveling device
» Independent nozzle temperature control
Clamping unit
» 6 mold moving steps
» Mold safety protection
» Mold setup mode
» Injection compression function
» Clamping force pre-release during cooling
» Injection during clamping(Pre-injection)
» 2 Step mold close/clamp process
» In mold cut function (ejector activate when mold closed)
» Clamping safety device(Mechanical and Electrical)
» Adjustable moving platen support
» Clamping force setting
» Ejector device
» Ejector function deactivatable
» 3 Ejector steps
» Ejector forward delay function
» Ejector vibration function
» Ejector A/B function(2 steps ejector stroke)
» Eject on the fly
» Ejector plate return signal confirmation
» Cooling water distributor(6 sets up to 150T,8 sets for
others)
» Embedded locating ring (fixed platen)
» In mold ejector pin protection interface
» Mold installation mode (Low speed mold move)
» Needle shut off nozzle interface
(one spare electrical interface)
» Emergency stop(Operating and Non-operating sides)
» Robot mounting layout
» Central lubrication system
» S-curve flexible control for mold movement
» Hydraulic core interface(programmable)
Controller & Monitor
» 15 inch TFT color touch screen
» Mold profile data memory (up to 200 sets)
» Alarm history
» Data setting record
» 3 USB R/W interface
» Injection pressure(speed curve display and record
» Robot interface
» Multi-language available(Chinese, German, English,
Japanese etc.)
» Metric/Imperial unit select
» I/O monitor display
» Printer interface(USB connector)
» Production cycle monitor
» Production profile monitor
» Production data record(5000 cycles display,
100,000 cycles record)
» Production data graphics
» Quality parameters tolerance setting
» Quality abnormal alarm
» Cycle counter
» Machine overview display
» Main data setting fast access
» Machine maintenance administration
» Clamping force curve display
» Barrel temperature monitor
» Display cycle time sequence in each phase
» 2 Color alarm lamp(red/green)
» Alarm buzzer
» Injection overfill prevention (HPM)
» Display of actual performance data
» Multi-action selectable during machine alarm
Others
» Standard Zhafir color
» Adjustable machine pads
» 3 Power sockets (two 16A and one 32A)
» Standard hopper
» Mold clamper
» T-screw nuts(for T-slot use)
» Hopper slide movement support
» Tools box
» Spare parts
40 41
Options List
Injection Unit
» Chrome-plating screw unit
» Corrosion and abrasion resistant screw unit
» High capacity nozzle heat band
» Extended nozzle
» V/P switch based on in-mold pressure
» Needle shut off nozzle
» Spring nozzle
» Nozzle head customization
» Stainless steel hopper
Clamping unit
» Air blow
» Pneumatic ejector
» Pneumatic core interface(Programable)
» Valve Gate control interface
» Glass tube water flowmeter
» Customized mold platen(T-slot,threaded holes)
» Mold unscrew electrical interface
» Mold height extension
» Mold slide block protection interface
» Eject compression function
» Mold auto clamp device (Pneumatic/hydraulic)
» Intergrated hot runner controller
Product drop plate
Automatic safety gate on operator side
Clamping force automatically controller
Quality flap
Product drop detector
Controller & Monitor
» Mold temperature display and control
» Quality flap interface
» Heating disconnect detection function
» Additional cooling water distributor
» External transformer
» Euromap 12 robot interface
» Euromap 67 robot interface
» Gas-assisted injection interface
» Magnetic platen interface
» Mold cavity pressure detection interface
Others
» Infrared barrel heating band
» Barrel heating insulation cover
» CE certification
» UL certification
42 43