Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
n Smoke/GAS/CO/Heat Detector p12-p14
n Vibration sensor and analyzer p15-p16
n Glass Break Detector p17
n Water Detector p18
n Manual Call Point p19
n Photoelectric Beam Detector p20
n Outdoor Siren p21-p23
n Strobe/Piezo Siren p24-p25
n Strobe Light p26
n Magnetic Switches p27-p31
n Panic Button & others p32
n Intrusion alarm panel p3
n PIR and MW Detector p4-p9
FEATURES
SPECIFICATIONS
Intrusion Alarm Panel
n IM-2008/2016
IM-2008/2016
* Wired Control Panel for 8/16 programmable Zones* Led keypad* Automatically dials alarm center user’s mobile phone or telephone with audible alarm while emergency happens* Settable 6 groups of phone number and 2 groups alarm center phone * Connect 4 keypads at most * 8/16 wired programmable zones* Different programmable settings* Single zone ARM and DISARM* Connect 4 keypads at most* compatible ADEMCO4+1, CID communication protocol* Record 100 latest alarm events* Built-in voice module, 10seconds record, voice alarm function* 1 PGM output
159mm×138mm×33mmKeyboard Dimension
274mm×264mm×86mmSize (L*W*H)
-10ºC to 55ºCOperating Temperature
40~70%Operating Humidity
DC12V~15VOutput Voltage
14V 800mAAlarm Output
<1.5WPower
≤ 50mAStatic Current
110 or 220VAC±10%Power Supply
168Wired zones
IM-2016IM-2008Item
FEATURES
SPECIFICATIONS
PIR Detector
* Microprocessor Design* Real Temperature Compensation* Anti white Light* Low Power Consumption* High RFI Immunity to Reduce False Alarm (22V/m at 10Mhz to 1GHz)* Professional Optical Lenses* Resist Fluorescent Interference * Form-C Relay * Smart and Elegant Design is Ideal Selection for Residential Installations* Detect range: 10 meters
* 20Kg Pet immunity model PT-210 is optional
n PR-210/PT-210
PR-210/PT-210
PR-210 NO/PT-210 20KGPet immunity
89 x 52 x 39mmSize (L*W*H)
-5ºC to 50ºCOperating Temperature
22V/m at 10Mhz to 1GhzRFI characteristic
2 minutesTime to Warm-up
2.2sResponse time to Alarm
110°Detecting Angle
10m (under 26℃ in indoor room)Detecting Distance
2.4mInstallation Height
NC, 12VDC, 100mA maxContacts of Alarm
12mA at 12VDCRated Current
9-16VDCOperated Voltage
12VDCRated Voltage
PR-210/PT-210Item
FEATURES
SPECIFICATIONS
PIR Detector
* Microprocessor Design* Real Temperature Compensation* Anti white Light* Low Power Consumption* High RFI Immunity to Reduce False Alarm (22V/m at 10Mhz to 1GHz)* Professional Optical Lenses* Resist Fluorescent Interference * Form-C Relay * Smart and Elegant Design is Ideal Selection for Residential Installations* Detect range: 12 meters
* 33Kg pet immunity model PT-410 is optional
n PR-410/PT-410
PR-410/PT-410
PR-410 NO/PT-410 33KgPet immunity
107 x 58 x 39mmSize (L*W*H)
-5ºC to 50ºCOperating Temperature
22V/m at 10Mhz to 1GhzRFI characteristic
2 minutesTime to Warm-up
2.2sResponse time to Alarm
110°Detecting Angle
10m (under 26℃ in indoor room)Detecting Distance
2.4mInstallation Height
NC, 12VDC, 100mA maxContacts of Alarm
12mA at 12VDCRated Current
9-16VDCOperated Voltage
12VDCRated Voltage
PR-410/PT-410Item
FEATURES
SPECIFICATIONS
PIR Detector
* MCU processing* Anti-Tamper Shield* Anti-white Light Function* Auto temperature compensation, reducing false alarm* LED ON/OFF optional* Alarm delay optional* Adopted SMT, high EMI/RFI immunity
n PR-601
PR-601
* Input Voltage: DC 9~16V* Operating Current: ≤20mA (DC 12V )* Operating Temperature:-10℃~+50℃* Installation Method: Wall mounted* Installation Height: 2.2m is recommended* Detecting distance: 12 meter* Detecting Angle: 110°* Alarm Output: Normal Close* Anti Tamper Switch: Normal Close* Dimension: 89*52.5*38.5mm
FEATURES
SPECIFICATIONS
n PR-604
PIR Detector
* Ceiling Mounted* Anti- burn ABS Shield* Auto temperature compensation, reducing false alarm* Adopted SMT, high EMI/RFI immunity* Pulse Count optional for different environment installation * Dynamic Valve Adjustment Technology for Anti-interferences* Alarm output NC/NO optional for different controllers
PR-604
* Input Voltage: DC 9~16V* Operating Current: ≤18mA (DC 12V )* Operating Temperature:-10℃~+50℃* Installation Method: Ceiling mounted* Installation Height: 2.5m ~6m is recommended* Detecting distance: 6 diameter (at 3.6m installation height)* Detecting Angle: 360°* Alarm Output: NO. NC optional * Anti Tamper Switch: Normal Close
FEATURES
SPECIFICATIONS
PIR+MW Detector
n PD-110
PD-110
* Dual PIR and MW technology* Microprocessor Design* Temperature compensation* Microwave range is adjustable* Dual polarity pulse count adjustable* Top view window and creep zone* High PRI Immunity for false alarm prevention(30V/m-1GHz)* Bracket is available* Memory and Form-C relay* Detect range 10m(PD-110), 11M( PT-111),15m(PD-115), 25m(PD-125) are optional
128 x 64 x 40mmSize (L*W*H)
-5ºC to 50ºCOperating Temperature
22V/m at 10Mhz to 1GhzRFI characteristic
2 minutesTime to Warm-up
2.2sResponse time to Alarm
110°Detecting Angle
10m (under 26℃ in indoor room)Detecting Distance
2.4mInstallation Height
NC, 12VDC, 100mA maxContacts of Alarm
25mA at 12VDCRated Current
9-16VDCOperated Voltage
NoNoNoAnti-mask
No40kgNoPet immunity
15m11m10mDetect range
12VDCRated Voltage
PD-115PT-111PD-110Item Models
FEATURES
SPECIFICATIONS
* Ceiling mounting, tope view 110°, 360° full orientation* Dual IR and MW technology* Microwave range is adjustable* High resist interference of white light* Power consumption is low* High RFI Immunity for false alarm prevention* Professional optical pigmented lenses* Pulse count is selectable
n DT-150
DT-150
-20ºC to 60ºCStorage Temperature
¢130 x 21mmSize (L*W*H)
0ºC to 50ºCOperating Temperature
30V/m at 10Mhz to 1GhzRFI characteristic
2 minutesTime to Warm-up
2.2sTime to Alarm
NC, 12VDC, 100mA maxContacts of Tamper
NC, 12VDC, 50mA maxContacts of Alarm
25mAOperated Current
9-16VDCOperated Voltage
DT-150Item
PIR+MW Detector
FEATURES
SPECIFICATIONS
Smoke Detector
SD-98-4
* Dual LEDs for 360-degree visibility* Stainless steel inner housing for high ANTI-RFI* Two or four wire models optional* Sleek, low-profile housing design* Low power consumption, high precision and stability* Durable Sensor Head; Excellent smoke access* Auto-reset default for 4 wire connection or power-off reset optional* Easy Installation and maintenance
104mm(Dia)x51mm(H)Dimensions
≦95%RHOperating Humidity
-10°C ~ +55°COperating Temperature
Ceiling MountedInstallation Method
Relay output (N.O/N.C) and LED flashAlarm Output
80 square meter(with the installation height of 6m-12m), and 60 square meter (with the installation height less than 6m)Detecting Area
≦12mAAlarm Current
≦10mAStandby Current
DC12VOperating Voltage
SD-98-4 wireModels
FEATURES
SPECIFICATIONS
Gas Detector
GD-87
* Adopted SMT* MCU processing* Highlight dual color LED indication* Low power consumption * 2 in 1 Button: Test & Auto-reset* Ceiling Mounted* Unique bracket design, easy installation* Relay out (N.O/N.C)* High adaptability to the ambient, with dustproof, mothproof, moisture proof and high EMI immunity
function
≦95%RHOperating Humidity
¢115 x 51mmDimensions
-10°C ~ +55°COperating Temperature
≤60sElectrify time
Auto-reset (Power off reset≤0.5s optional)Alarm Reset
Flash & sound alarm / Network Alarm Signal Alarm Mode
Relay output(NC/NO) and Sound & flash alarmAlarm Output
≥75dB/mSounder Level
80-120mA (At DC 12V)Alarm Current
≤60mA (At DC 12V)Standby Current
DC 9-16V Operating Voltage
Natural Gas / LPGInduced Gas
GD-87Model
FEATURES
SPECIFICATIONS
Gas Detector
GD-86
* Hot wire type sensor* Easy installation and maintenance * Modernized design* Detect all sorts of combustible gases, LPG and LNG include city gas * Ideal for all kitchens * Excellent reliability & high stability * Self test function * Durable sensor head * Less affected by other organic solvent * High Accuracy * Relay out N.O/N.C* Connected with Valve (12VDC Output) model GD-86V optional * Suitable for safety valve
GD-86 Relay out(NC/NO),GD-86V 12V e-valvaAlarm Output
-10℃ to 50℃Working Temperature
85dB at 3 metersSound Level
≤95%Working Humidity
Red LED flashes with acoustic alarmAlarm Mode
Green LED on/Yellow LED onStandby Mode/Faulty Indicator
10%LELSensitivity
≤1.7WPower Consumption
90-240V AC or 110V/220VACPower Source
LPG (Butane, Propane); Natural gas (Methane)Type of Gas sensed
GD-86Model
FEATURES
SPECIFICATIONSCO-90
* Carbon Monoxide Detector* Wall mounted* Independent & Network Optional* 12VDC/220VAC optional* NO/NC relay out* Electronic valve connection
N.C/N.O,electronic valveAlarm output
<=5w (AC supply)Power consumption
Sound&flash alarm,electronmagnetic switch,networkAlarm mode
-10°C ~ +55°C,Humidity <=95%RHOperating environment
+-5LELAlarm error
115*72*40mmDimension
>=85db(1m)Buzzer Level
15%LEL/150PPM(CO)Alarm density
<=100mA (DC supply)Alarm Current
<=50mA (DC supply)Static Current
DC 12V/AC 220V 50HzWorking Voltage
Natural GAS/LPG/COIncluded GAS
CO-90Model
Carbon Monoxide Detector
FEATURES
SPECIFICATIONS
Heat Detector
HD-94
* Non Polar 4-wire connection, Relay output * Modern stylish design * Low Power consumption * Power-off reset function* Easy Installation and maintenance * Extended warranty* Relay out N.O/N.C
100mm(Dia)*46mm(H)Dimensions
≦90%RHOperating Humidity
0°C ~ +80°COperating Temperature
Ceiling MountedInstallation Method
Relay output (N.O/N.C),Sound&Flash AlarmAlarm Output
≦60mA at DC 24VAlarm Current
≦200uA (DC 24V)Standby Current
DC10-32VVoltage Range
HD-94Model
FEATURES
SPECIFICATIONS
Vibration Detectorn VD-201* Strong detection ability, long-frequency
vibration and shock* Sensibility adjustable: high, medium, low* Pulse output time: 0.5mS-50Ms
10mA(Min)Operating current
20mA(Max)Operating current
60VDC(Max)Operating voltage
12VDCInput Voltage
VD-201Items Model
Vibration Analyzer
n VD-972* Sensitivity adjustable * Time interval adjustable * EOL monitoring of balance test circuit* Automatic reset/manual reset/ power-on reset adjustable * Trouble alarm function* Anti-tamper alarm function* Anti-thunder, anti-surge design* Maximum up connection 10 VD201 sensor
VD-972
135*70*50mmDimension
Test voltage 2 KVEFT/B test data
Test voltage 1 KVSurge test data
NCAnti-temper output
NCAlarm output
80~200msTime interval adjust
0.1~60ms inputVibration sensitivity
Vibration switch sensor, maximum 10 VD201 sensor in serialsSensor type and connection number
-10°C~50°C(14°F~122°F)Operating temperature
45mAOperating current
DC12V(voltage range:DC10-16V)Operating voltage
VD-972
FEATURES
Vibration Detector
VD-200
* Independent vibration detector* Photo electricity Vibratory Sensor* Sensitivity is Adjustable* Microprocessor Design Improves False Alarm Immunity* Power Consumption is Low* Mounting Fashion is Flexible* Tamper Immunity* Alarm Indication* Compliant to Any Environment* Compact and Elegant Shape
SPECIFICATIONS
* Operating voltage: 9-16 VDC* Current: 11mA at 12 VDC* Alarm contacts: 0.1 amps, 24 volts, NC * Tamper contacts: 0.1 amps, 24 volts, NC * Alarm time: 2.2s min* Warm time: <2 minutes* Operating temperature: -20 degree C to 50 degree C* Storage temperature: -20 degree C to 60 degree C* Mounting fashion: surface* Size: 85x26x25 mm
FEATURES
SPECIFICATIONS
Glass Break Detector
* MCU Processing* Unique Appearance Design* Dual LED Indication* Sensitivity High/Low Optional* Unique Test Mode* Unique Alarm Locking Mode* High Density SMT Design* High EMI/RFI immunity
N.C, Connection Point: 28VDC, 100mAAnti-Tamper Switcher
≤25mAAlarm Current
9-16V DCRated voltage
≤15mA (DC 12V) Operating Current:
N.C, Connection Point: 28VDC, 80mARelay Output
9 meter (High Sensitivity); 5 meter (Low Sensitivity)Detection distance
Flat-panel, steel, laminated and metal coating glassSuitable for glass
GD-210Items Model
n GD-210
SPECIFICATIONS
n WD-501
Water Detector
FEATURES
* ABS plastic house* Build-in buzzer alarm* Apply to detect the leakage of conductive liquid* Install the water detector on the wall near the floor* Easy installation* Ideal for water level detector
60x25x90mmDimension
8mMax additional remote sensor
NC/NO(1A 24VDC)Relay Output
35mmExternal probe max length
-10℃~+50℃Operating Temperature
20mAMax current
≤15 mA (DC 12V)Static Current
12VDCInput Voltage
WD-501Items Model
SPECIFICATIONS
n FS-10
Liquid Level Detector
FEATURES
* Ideal for water or liquid level with PH-/PH+* Material of Body: SUS304* Material of float: SUS316* Output: Normal open with 10W* Material of screw net & E-ring: SUS304* Proportion of float: 0.7kg/cm3* Max pressure: 10kg/cm2* Leads: 1430UL22AWG430mm length
FS-10
-40 – 150 degree COperating Temperature
∞ ohmInsulation Resistance (Min)
0.2ohmInitial Resistance (Max)
DC1.0ACarrying Current (Max)
0.5ASwitching Current (Max)
200VBreakdown Voltage (Min)
DC100VSwitching Voltage (Max)
10WSwitching Power
UpperContact Position
ParametersDescription
SPECIFICATIONS
n FS-11
Liquid Level Detector
FEATURES
* Ideal for water or liquid level with PH-/PH+* Material of Body: SUS304* Material of float: SUS316* Output: Normal open with 10W* Material of screw net & E-ring: SUS304* Proportion of float: 0.7kg/cm3* Max pressure: 10kg/cm2* Leads: 1430UL22AWG330mm length
FS-11
-40 – 150 degree COperating Temperature
∞ ohmInsulation Resistance (Min)
0.2ohmInitial Resistance (Max)
DC1.0ACarrying Current (Max)
0.5ASwitching Current (Max)
200VBreakdown Voltage (Min)
DC100VSwitching Voltage (Max)
10WSwitching Power
UpperContact Position
ParametersDescription
SPECIFICATIONS
n FS-12
Liquid Level Detector
FEATURES
* Ideal for water * Material of Body & screw net: PP+GF* Material of float & E-ring: PP* Output: Normal open with 10W* Proportion of float: 0.7kg/cm3* Max pressure: 10kg/cm2* Leads: 1430UL22AWG330mm length
FS-12
-10 – +60 degree COperating Temperature
∞ ohmInsulation Resistance (Min)
0.2ohmInitial Resistance (Max)
DC1.0ACarrying Current (Max)
0.5ASwitching Current (Max)
200VBreakdown Voltage (Min)
DC100VSwitching Voltage (Max)
10WSwitching Power
UpperContact Position
ParametersDescription
SPECIFICATIONS
n FS-13
Liquid Level Detector
FEATURES
* Ideal for water * Material of Body & screw net: SUS304* Material of float & E-ring : PP* Output: Normal open with 10W* Proportion of float: 0.7kg/cm3* Max pressure: 10kg/cm2* Leads: 1430UL22AWG430mm length
FS-13
-10 – +80 degree COperating Temperature
∞ ohmInsulation Resistance (Min)
0.2ohmInitial Resistance (Max)
DC1.0ACarrying Current (Max)
0.5ASwitching Current (Max)
200VBreakdown Voltage (Min)
DC100VSwitching Voltage (Max)
10WSwitching Power
UpperContact Position
ParametersDescription
SPECIFICATIONS
n FS-14
Liquid Level Detector
FEATURES
FS-14
-10 – +80 degree COperating Temperature
∞ ohmInsulation Resistance (Min)
0.2ohmInitial Resistance (Max)
DC1.0ACarrying Current (Max)
0.5ASwitching Current (Max)
200VBreakdown Voltage (Min)
DC100VSwitching Voltage (Max)
10WSwitching Power
UpperContact Position
ParametersDescription
* Ideal for water * Material of Body & screw net: PP+GF* Material of float & E-ring: PP* Material of screw net: ABS* Output: Normal open with 10W* Proportion of float: 0.7kg/cm3* Max pressure: 10kg/cm2* Leads: 1430UL22AWG430mm length
Call Point
FEATURES
SPECIFICATIONS
IM-922n IM-922 n IM-911
IM-911
n IM-922 n IM-911
* Flexible manual call point* Polyester enclosure---light, strong and not
subject to corrosion * Unique ”Plug & Play” installation concept * Simple Maintenance: only one tool is
needed for test and reset * Choice of Surface or Flush mount* Marking options available* Available color: red, green* Customization color: yellow, white, blue
* Operating voltage: 30VDC* Operating current: 2A* Withstood-voltage: 250V* Operating temperature: -10℃-50℃
•Break glass manual call point* Convenient testing with key* Choice of Surface or Flush mounting* Marking options available* Available in a variety of color: red, green* Customization color: yellow, white, blue
* Operating voltage: 12/24VDC* Operating current: 5A* Withstood-voltage: 250VAC* Operating status: NO NC (DPDT can be
customized)
FEATURES
SPECIFICATIONS
Beam Detector
IP65IP Rating
PC Resin(Black)Appearance
650g(Both transmitter and receiver)Weight
Wall or poleMounting
±10°vertical, ±90°horizontalAlignment angle
95%maxEnvironment humidity
-25℃ to +55℃Operating temperature
N.C. Opens when cover is removedTamper switch
Form C relay(AC/DC30V 0.5A max)Alarm output
2sec(±1)nominalAlarm period
65mA max65mA max55mA max40mA maxCurrent consumption
DC12~24V/AC11~18VPower input
50~700msec(selectable)Interruption period
Pulsed infrared dual beamsBeam Characteristics
300m240m180m90mIndoor
100m80m60m30mOutdoorRange
Infrared photoelectricDetection Method
ABT-100ABT-80ABT-60ABT-30Items Model
* Dual Photoelectric Detector, difference distance as option* Twin synchronized pulsed beams designed for greater stability* Design Durability* Frost and dew protection* High grade aspherical lens* Perfect beam blocking stability* Adjustable beam interruption period* Quick optical and voltage alignment to speed up positioning* A.G.C (Automatic Gain Control) Circuit
SPECIFICATIONS
n IM-302 n IM-301/301B* High resistant PC housing, UV prevention * Internal/External Tamper trigger selectable * Internal 7.2V rechargeable battery backup * SAB function available* Twin or single sounders selectable.* 4 kinds of sounder timer selectable.* Piercing siren sound with high-visibility xenon strobeflashes.
* Separated strobes providing both negative andpositive inputs
* Red and green LED indicate easy status confirmation* Lens: Blue, red colors selectable
* ABS Housing with UV resistance * Internal/External Tamper trigger selectable * SAB function available* Twin or single sounders are selectable* 4 kinds of sounder time selection* Piercing siren sound with high-visibility xenon strobeflashes
* Separated strobes providing both negative and positiveinputs
* Red and green LED indicate easy status confirmation* Lens: Blue, red colors selectable
1Kg
300x250x65mm
IP65
-25℃ to +70℃
5sec(test),3 min,20min,continuous
once per 1 sec
115dB for single sounder, 120dB for twin sounders
380mA at 13.5V DC 300mA at 13.5VDC
7.2V 500mA rechargeable
20mA at 12V DC
12-15V DC
PC Housing with UV resistance
IM 302
0.8Kg0.6KgWeight
210x130x78mmDimensions
IP Rating
Operating temperature
Timers
Flash rate
Siren output
Siren current
7.2V 500mA rechargeableNABackup battery
Current consumption standby
Operating voltage
ABS Housing with UV resistance Material
IM 301BIM 301Items ModelsOutdoor Siren
FEATURES
FEATURES
SPECIFICATIONS
n IM-304 n IM-303
Outdoor Siren
* Highly resistant ABS housing, UV prevention* Inside metal cover for double protection* Magnetic dynamic sounders with 120DB at 1M* Positive/negative siren trigger* Positive/negative flash trigger* Battery Backup* Len colors in red orange optional* 2 Way tamper switch protection
* Highly resistant ABS housing, UV prevention* Inside metal cover for double protection* Magnetic dynamic sounders with 120DB at 1M* Positive/negative siren trigger* Positive/negative flash trigger* Battery Backup* Len colors in red, orange optional* 3 Way tamper switch protection
1.85kg1.2kgWeight (Without Battery)
270X193X100mm280X170X97mmDimensions
IP65IP Rating
-30℃ to +60℃Operating Temperature Range
PC with UV ProtectionCase Protection Level
External Box-ABS(3mm thick), Internal Cover: Metal(0.8mm thick)Material
8VDC +/-0.3VDCLow Battery Level
Rechargeable Lead Acid Battery 12V up to 1.3AhBackup Battery
NC.28 VDC Maximum Current 0.1A, Open when cover is removedTamper Switch
F.T-Follow Trigger TMR-3minSiren Alarm Period
Trigger Low=Max. 1VDC, Trigger High=Min.9VDCTrigger Level
50W(Peak)Maximum Power
Standby-8mA, [email protected], [email protected] Consumption (Speaker and Strobe)
250mACharge Current Limit
13.8-14.2VDCPower supply Voltage
Lamp 12VDC/5WFlash Light
1300-2400Hz500-3000HzSiren Tone
1850HzFundamental Frequency
YelpSound Tone
120dBSound Pressure
IM 303IM 304Items Models
FEATURES
SPECIFICATIONS
n IM-306
Outdoor Siren
IM-306
*Dual tamper protection from upper cover removal or removal of the bell box. Optional protection of screw loose.*Equipped with internal 7.2V rechargeable battery, SAB mode is available. Optional VRLA battery room is provided.*Red and green status LED indications for easy status confirmation. The indications are as follows:
**Red and green LEDs flash alternately means system in standby mode.**Green LED off means no backup battery power supply, Red LED off means no main power supply.**Red and green LEDs flashing twice quickly means siren trigger.**When main power is cut or tamper, red and green LEDs flash quickly, LED and the LEDS will work simultaneous.
*Piercing siren sound with 12PCS super light LED . Trigger signals for sounders and strobe are separate and both negative and positive inputs are compatible.*4 kinds of sounder timer selections. The default selection is 3 minutes. 1 minute, 15 minutes, and continuous sound are selectable with dip switch. *External or Internal tamper trigger is selectable. Real outdoor tamper switch provided.
650gWeight:
260mm X 159mm X 75mmDimensions (L X W X H):
Blue, Red color are selectedLens:
PC with UV Resistant different housing colorsHousing:
-25°C to +70°COperating Temperature:
INT/EXT selectableTamper Trigger:
1 min, 3 min, 15 min, continuous Timers:
90 times per minute.Flash Rate:
110db Siren Output:
180mA at 12VdcFlash Current:
220mA at 12VdcSiren Current:
7.2V 500mA rechargeableBackup Battery:
20mA at 13.5VDCCurrent Consumption Standby:
13.5VDCOperating Voltage:
FEATURES
n IM-103
Strobe Siren
* Material: ABS Housing, acrylic lens* Working Current: 280 mA at 12VDC* Tone Nature: Warble* Flash rate: 90 flashes/minute* SPL DB/1m: 112±3* Lens color: red* (A) type: strobe and siren (standard)* (B) type: siren only* (C) type: strobe only* Size (mm): 122.2L * 72.8W * 43H
* ABS Housing In Red * Operating Range:6-15 VDC * Rated current: 200mA* Rated Voltage:12 VDC* SPL DB/1m:112±3 * Size (mm): 122L * 72W * 36H
n IM-102
Piezo Siren
FEATURES
* ABS Housing in Black or White * Operating Range: 6-15 VDC* Rated current:: 180 mA* Rated Voltage: 12 VDC* SPL DB/1m: 105±3 * Size (mm): 60L * 45W * 40H
n IM-101
* ABS Housing in Black or White* Rated Voltage: 12 (VDC) * Operating Range: 6-15(VDC)* Current(mA):200mA* SPL(dB/1m): 110±3* Tone: One tone or Six tone* Rated power:20W* Size:53Φ*47mm
n IM-104
* ABS Housing In White * Current(mA): 400* Voltage(VDC): 12* Operating range(VDC): 6-15* SPL(dB/1m): 104±2* Tone: Dual tone* Rated power:15W* Size:110*110*55.4mm
n IM-105
FEATURES
n IM-111
ABS Housing white* Rated Voltage:12 (VDC) * Operating Range:6-15(VDC)* 15W siren, dual tone
* ABS Housing In White* Rated Voltage:12 (VDC) * Operating Range:6-15(VDC)* 30W siren* dual tone, 1200MA
n IM-112
Piezo Siren
Piezo Siren
IM-111
IM-112
FEATURES
n IM-80
Strobe Light
* ABS base, acrylic lens* Rated voltage: 12VDC* Working Current: 200 mA at 12VDC, 120 mA at 24VDC
* Flash rate: 65 flashes/minute* Working time: more than 200 hours (standard power work continuously)
* Installation type : two screws •Strobe colour: red or blue available* U-type tube* 100Ø x 75H mm
n IM-79
n IM-79LED
* ABS base, acrylic lens* Rated voltage: 12VDC* Working Current: 200 mA at 12VDC, 120 mA at 24VDC
* Flash rate: 65 flashes/minute* Working time: more than 200 hours (standard power work continuously)
* Installation type : two screws* Neon tube* 70 Ø x 36.5 (without mount base)
* ABS base, acrylic lens* Rated voltage: 12VDC* Working Current: 50 mA at 12VDC,
30 mA at 24VDC * Flash rate: 120 flashes/minute* Working time: more than 1000 hours* Installation type : two screws* Life time: ≥1000 hours (standard
power work continuously)* LED light* 70 Ø x 36.5 mm (without mount base)
Strobe Light
FEATURES
FEATURES
n IM-120
Magnetic Switches
* 3/8 inch diameter press fit contact* 17 inch (43cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 10DIA * 32L mm
n IM-121* 3/8 inch diameter flanged recessed switch* Press fit contact * 17 inch (43cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 10* Size: 19DIA * 32L mm
n IM-122* 1/4 inch diameter straight cylindrical superminiature recessed switch
* Press fit contact * 14 inch (35cm) side leads with AWG #24* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 6DIA * 14L mm
n IM-123
* 1/4 inch diameter straight cylindrical super miniature recessed switch
* Press fit contact * 17 inch (43cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC:100* Size: 7DIA * 27L mm
Magnetic Switches
FEATURES
n IM-124* 3/8 inch diameter miniature flush mounted* Nickel plated magnet* 17 inch (43cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 6DIA * 14L mm
n IM-125* Mini stick-on contact with flange* Self-adhesive and screw mount* 12 inch (30cm) center leads with AWG #24 * Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form : NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 27L * 14W * 8H mm
FEATURES
n IM-126
Magnetic Switches
n IM-127
n IM-128
n IM-129
Magnetic Switches
FEATURES
* Mini stick-on contact with flange* Self-adhesive and screw mount* 16 inch (40cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 27L * 14W * 8H mm
* Screw mount* 16 inch (40cm) side leads with AWG #22* Magnet: Permanent Ferrite* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 64L * 12.8W * 12.8H
* Self-adhesive and screw mount * Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 44L * 10W * 7H mm
* Mini stick-on contact with flange* Self-adhesive and screw mount* 16inch (40cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 34L * 13.5W * 8H mm
IM-128
n IM-130* 3/4 inch diameter press fit contact* Suitable for steel door install* Self-locking housing* 12 inch (30cm) side leads with AWG #24* Longer leads available* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 1 1/2(40±10) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 24DIA * 25L mm
n IM-130W
* ABS housing, ideal for metal door* Gap: 25~35mm* Size: 24DIA * 25L mm
IM-130W
Magnetic Switches
FEATURES
n IM-132
n IM-134
FEATURES
* Mini stick-on contact with flange* Self-adhesive and screw mount* 16inch (40cm) side leads with AWG #22* Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4(20±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100 * Size: 27L * 14W * 8H mm
* Metal magnetic contacts * Switch & magnet concealed in polished
alloy-zinc die-cast housing * 12 inch (30cm) side leads with AWG #22* Screws included* Reed : OKI®* Magnet: NdFeB* Ideal for commercial application or industrial
use* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 1 (25±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 10* Size: 32L * 15W * 9H mm
n IM-133* Self-adhesive and screw mount concealed
terminals* Cover, spacer and screws included* Magnet: Permanent Ferrite* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 1/2(16±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100 * Size: 64L * 19W * 13H
n IM-131* 3/8 inch diameter super miniature stubby
switch * ress fit mini contact* 12 inch (30cm) side leads with AWG #24 * Magnet: NdFeB* Color: white, brown, grey* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 3/4 (18±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100* Size: 12DIA * 18.5L mmMagnetic Switches
n IM-135
* Metal magnetic contacts * Switch & magnet concealed in polished
alloy-zinc die-cast housing * 20 inch (50cm) side leads with AWG #22* Screws included* Reed: OKI®* Magnet: NdFeB* Ideal for commercial application or industrial
use* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 2 (50±10) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100 * Size: 49L * 25W * 15H mm
Magnetic Switches
FEATURES
Magnetic Switches
FEATURES
n IM-140IM-140* Flange mounted, for non-steel* White, Brown is optional* Operating distance:16mm±5mm* White, Brown color is optional
n IM-136* Overhead door contact* Miniature floor mount* Switch & magnet concealed in polished
aluminum die-cast housing * 20 inch (50cm) stainless armored cable
with AWG #24* Reed: OKI®* Magnet: NdFeB* Long cable available on request* Loop Type closed * Reed Form NO * Operating Gap Inch(mm) 3(70±5) * Max Contact Resistance Ohm 0.2 * Max Rating Current mA 500 * Max Switching Voltage VDC 100 * Size: 106.5L * 38.2W * 10.3H mm
* Switch & magnet concealed in polished aluminum die-cast housing
* 12 inch side lead with AWG #24* Screws included* Reed: OKI®* Magnet: NdFeB* Ideal for commercial application or industrial
use* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 1 1/3(35±5) * Max Contact Resistance Ohm: 0.2 * Max Rating Current mA: 500 * Max Switching Voltage VDC: 100 * Size: 50L * 18W * 10H mm
n IM-138
n IM-139
* COM.,N/O,N/C * Switch & magnet concealed in polished
aluminum die-cast housing* 20 inch side lead with AWG #24* Screws included* Reed: OKI®* Magnet: NdFeB* Ideal for commercial application or industrial
use* Loop Type: closed * Reed Form: NO * Operating Gap Inch(mm): 2(50±10) * Max Contact Resistance Ohm: 0.2 * Max Rating Current Ma: 500 * Max Switching Voltage VDC: 100 * Size: 105L * 50W * 50W
Magnetic Switches
FEATURES
Magnetic Switches
FEATURES
n IM-141IM-141
* Magnet Contact (metal case)* Operating distance: 40mm±5mm* Apply for steel door
n IM-142IM-142
Alloy-Zn Magnetic Switches* Operation Gap: 50-80mm, * Size: 105.7mm*25mm*32mm(L*W*H)
n IM-143IM-143* Magnet Contact (ABS with silver
electroplating)* Operating distance: 40mm±5mm* Apply for steel door
n IM-144IM-144* Magnet Contact (metal case)* Operating distance: 50mm~70mm* COM.,N/O,N/C * Size: 105L*47.5W*9.5H
IM-146 n IM-146
* Magnet Contact (metal case), ideal for rolling door
* Operating distance: 50mm~70mm* COM.,N/O,N/C * Color: Grey* Size: 106*38mm* Switch 106*16*16.5mm Magnetic
FEATURES
Panic Button
FEATURES
Pedal Switch
n IM-02* Auto reset * ABS plastic housing * Electrical Life: more than 20,000 times* Large button has ”EMERGENCY” printed
on face* Color: White* Operating voltage: 12VDC/24VDC* Load current: 0.3A * Switch withstood voltage: 250VAC * Contact mode: COM, N/O, N/C* Size: 76*17*17mm
* Key reset * ABS Plastic or Metal Case Body* White or Grey Color Optional* Operating voltage: 12VDC/24VDC* Load current: 0.3A * Switch withstood voltage: 250VAC * Contact mode: COM, N/O, N/C* Size: 54*54*32mm
n IM-01
n IM-05
* Key Reset / Auto Reset* ABS Plastic Housing* Operating voltage: 12VDC/24VDC* Load current: 0.3A * Switch withstood voltage: 250VAC * Contact mode: COM, N/O, N/C* Size: 86*86*32mm
* Pedal Switch with Auto Reset * Used to trigger by you feet* Material: Polyamide* Color: grey* Operating voltage: 12VDC/24VDC* Load current: 10A* Switch withstood voltage: 250VAC * Contact mode: COM, N/O, N/C* Size: 83*80*30mm
n IM-06
Anti-tamper Switch
IM-15* Anti-tamper Switch* Operating voltage:12VDC* Load current≥1.25A* Use with security host or others
n IM-15
Panic Button
IM-07* Contact mode: COM, N/O, N/C* Size: 86*86*20mm
n IM-06
IMAKE International Co.,LtdAddress: Building 1, MeLi AAA, West of Renmin Rd., LongHua, Baoan, Shenzhen, 518109, P.R.China
Tel: +86-755-29567551
Web: www.imake.com.hk
Email: [email protected]
View Products
View Company Profile
Related Products:
Disclaimer: This Brochure is provided by this particular member. TradeKey.com will not be responsible or liable for any content posted by our members.
IMAKE INTERNATIONAL CO., LTD
call point,manual call point,break glass alarm,glass call point,manual alarmcall point,break glass call point,emergency break glass alarm,call pointmanufacturer
http://www.tradekey.com/profile_view/uid/4081612/.htm
http://www.tradekey.com/product_view/id/1332573/.htm
View Products
View Company Profile
Related Products:
Disclaimer: This Brochure is provided by this particular member. TradeKey.com will not be responsible or liable for any content posted by our members.
IMAKE INTERNATIONAL CO., LTD
call point,manual call point,break glass alarm,glass call point,manual alarmcall point,break glass call point,emergency break glass alarm,call pointmanufacturer
http://www.tradekey.com/profile_view/uid/4081612/.htm
http://www.tradekey.com/product_view/id/1332573/.htm
View Products
View Company Profile
Related Products:
Disclaimer: This Brochure is provided by this particular member. TradeKey.com will not be responsible or liable for any content posted by our members.
IMAKE INTERNATIONAL CO., LTD
call point,manual call point,break glass alarm,glass call point,manual alarmcall point,break glass call point,emergency break glass alarm,call pointmanufacturer
http://www.tradekey.com/profile_view/uid/4081612/.htm
http://www.tradekey.com/product_view/id/1332573/.htm