Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Summary
Simple stand, adjustable to give you access when using it in "low mode"and reversible for a "high mode."
M3x16mm bolts into M3 nuts.
A and B are simply mirrored versions, because I wanted the aesthetic ofhaving the screw caps on the outside.
The "inputHolder" variant has a small 3.5mm hole to hold your patch cablewhen the OP-1 isn't in place. Match A OP-1 piece to A Jawbone piece, mix/match which one you want the holder on, go wild, I'm not your dad.
Planning on making some other sizes/styles for other wireless speakers,like the JBL Charge 3.
Hobby & Makers > Music
op1 jambox jawbone teenage stand engineering big
Josh Becker
OP-1 + Big JamboxStand
VIEW IN BROWSER
updated 4. 5. 2020 | published 4. 5. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
225.7 KBupdated 4. 5. 2020
101.9 KBupdated 4. 5. 2020
101.9 KBupdated 4. 5. 2020
225.7 KBupdated 4. 5. 2020
237.3 KBupdated 4. 5. 2020
237.3 KBupdated 4. 5. 2020
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
op-1_a.stl
jawbone_b.stl
jawbone_a.stl
op-1_b.stl
op-1_b_inputholder.stl
op-1_a_inputholder.stl
Attribution—Noncommercial—No Derivates
✖ | Sharing without ATTRIBUTION ✖ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition