Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Summary
This sword was design by DETHU Guillaume. Yes, i have the authorautorization for making these modifications and for this share with thecommunity. So many thanks to DETHU Guillaume.
This sword design was inspired in the Bride's katana from Kill Bill movies.
I originally started this project has a gift for a great friend who loves thesethings. To make it more 3D printable i made some changes on the originalCAD files. Reinforced some weak points and created an internalreinforcement system with M3 Rods to be able to handle the sword.
Present in thingiverse with ... thing:3561403 There is a picture with thepart list and the instructions to assembly.
You will need 1,5meter of M3 rods, 2x M3x35mm FlatHead screws, a goodquality plastic glue, at least 2-3 sandpapers with different grain, somecans of spray paint to your liking and most importantly alot of time andpatience.
Print the blade and scabard in ABS or ASA to be able to sand it. Assembleit first and sand it several times to remove any imperfections or glue spotsand marks. Use epoxy resin or repair putty if you need in any majorimperfections, repeat the sanding. Only paint those two parts when yourhappy with the smoothness of all the length.
I printed the blade and scabard in Fillamentum ASA. The remaining partswhre printed in PLA from Fillamentum. Ivory for the Handle, Collars andPommel in Gold Happens and the guard in Vertigo Grey.
L Lmbcruz
Katana Sword Propwith Sword Rack
VIEW IN BROWSER
updated 13. 12. 2019 | published 13. 12. 2019
3D M
ODEL
ONLY
For the handle i used some cord i bought on aliexpress (search for "ItoRope") mine had 1cm width and 420cm of lenght. For the wraping go toyoutube and search for "ito wrapping tutorial" fill yourself with patienceand wrap away... (i used cheats and holded the wraping with sewing pinsto help). But you can do this part differently and with other materials.
For the sword rack i used a simple wooden board and two supports idesigned. I used 450x130mm but you can go bigger if you like. Paint theboard or protect with some varnish to your liking. Print the 2x sword rackthingys, be sure to try out the best position to hold the sword beforescrewing the thingys to the board. I used some velcro tape (soft/loop side)to protect the sword from any scratches.
Warning: Tell your friends SEVERAL TIMES that this is not a real sword toswing around violently. (even if they secretly had ninja training orsomething) ;)The internal reinforcements help alot on the general resistence andhandling but they don't do miracles. Its a prop sword it will surelly break ifyou use it for showmanship of sword skills.
Sigh..... Yeah you probably guessed it, the sword i made got broken in amore enthusiastic display of the ninja skills from the person who receivedit. Glue again, alot of sanding repaint and its now fixed! ;)
Costumes & Accessories > Props
weapon sword killbill katana cosplayweapon
cosplayprop cosplay
Category: Props Print Settings
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Supports: Yes
Resolution: 0,2mm
Infill:
40%
Filament: Fillamentum PLA and ASANotes:
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
1.4 MBupdated 12. 12. 2019
758.5 KBupdated 12. 12. 2019
80.4 KBupdated 12. 12. 2019
402.1 KBupdated 12. 12. 2019
280.5 KBupdated 12. 12. 2019
68.1 KBupdated 12. 12. 2019
408.0 KBupdated 12. 12. 2019
584.3 KBupdated 12. 12. 2019
I used at least 3 perimeters and >40%infill on all the parts but i advice alotmore attention on the blade parts at least.
scabbard3.stl
scabbard1.stl
blade3.stl
swordrack.stl
collardown.stl
blade2.stl
completeblade.stl
guard.stl
451.5 KBupdated 12. 12. 2019
1.1 MBupdated 12. 12. 2019
89.7 KBupdated 12. 12. 2019
89.4 KBupdated 12. 12. 2019
167.9 KBupdated 12. 12. 2019
71.1 KBupdated 12. 12. 2019
1.0 MBupdated 12. 12. 2019
188.7 KBupdated 12. 12. 2019
Find source .stl files on Thingiverse.com
scabbard2.stl
pommel.stl
handle1.stl
handle2.stl
collarup.stl
blade4.stl
scabbard4.stl
blade1.stl
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition