Upload
phungbao
View
216
Download
0
Embed Size (px)
Citation preview
IR24 General 1(34) document.xls
Title
Version 7Date July 1, 2013
GSM Association ClassificationsBinding Core
End-to-End Functional Capability Specification for Inter-PLMN Roaming
(Stage 3 Testing)
IR24 General 2(34) document.xls
Security Classification Category
X
Roaming - Technical
Unrestricted
© Copyright of the GSM MoU Association 1992
Document History
Version Date
Draft Issues For Ad Hoc group discussion Oct - Dec 1991
Issue 1.01.01 For IREG Discussions Dec 1991 – May 1992to 1.04.00:
Version 2.00.00Incorporates comments from
27-Jul-92GSM Association Plenary
Version 2.01.00 Incorporates comments from IREG August 1992 25-Aug-92Version 2.01.01 Editorial Corrections 7-Sep-92Version 3.00.00 Approved MoU 21 21-Sep-92
Version 3.01.00Approved MoU 23
31-Mar-93Includes CRs 1, 2, 3 and 4
Version 3.02.00Approved MoU 24
30-Jun-93Includes CRs 5, 6, 7 and 8
Version 3.03.00Approved MoU 25
15-Feb-94Includes CRs 9 and 10
Version 3.04.00Approved MoU 30
24-Mar-95Includes CR11
Version 3.05.00Approved MoU31
UnknownIncludes CR.12
Version 3.06.00Approved MoU 40
20-Oct-98Includes CR.13
Version 3.06.01 3-Jul-00
Version 3.06.02 3-Jul-01
Version 3.07 IREG Doc 46/027 Incorporated 1-Dec-03
Non-Confidential - Industry
Information Category
This document is subject to copyright protection. The GSM MoU Association (“Association”) makes no representation, warranty or undertaking (express or implied) with respect to and
does not accept any responsibility for, and hereby disclaims liability for the accuracy or completeness or timeliness of the information contained in this document. The information contained in this document may be subject to change without prior notice. Access to and
distribution of this document by the Association is made pursuant to the Regulations of the Association.
Brief Description
To modify 2.1.6 (PSTN Telephone in Country Containing PLMN(b) Calls MS(A), which had roamed to VPLMN(b), But is not able to respond to paging) for Pre-paging – proposed from NTT DoCoMo.
IREG Doc 46/027 “NCR 016 to IR.24 Ver.3.7.0 for Clarification of Roaming Scenario to be Tested” incorporated
IR24 General 3(34) document.xls
Version 3.07.01 13-Nov-06
Version 3.08 IREG Doc 48/054 Incorporated 11-Feb-05Version 4.0 Approved CR30_007 5-Sep-06
Version 4.1 3-Aug-07
Version 4.1.01 14-Jul-08
Version 5.0 12-Mar-08
Version 6.0 30-Nov-09Version 6.1 "Stage 4" references corrected to "Stage 3" 11-Jul-12Version 7.0 Incorporation of CSFB Testing 1-Jul-13
1 INTRODUCTION1.1 Scope of Document
IREG Document PRD IR23 defines the scope and purpose of each stage of testing.
This document does not cover:
The Scope of this issue of the document extends to GSM Association Phase 1 services only.
1.2. Abbreviations
The following abbreviations are used:
The terms "visitor" and "roaming" are equivalent through the document.
Signal Doc 30_007_rev 1 “Major CR 031 to IR.24 Change Request” incorporated, to include SMS Interworking tests as Appendix C and D.
IREG Doc 48/054 “NCR 029 to IR.24 for Testing of CLI Delivery” incorporated. IREG Doc 48/013_Rev 1 “NCR 028 to IR.24” incorporated.
additional corrections in setups of sheet- GENERAL,TEST CASE PAGE, TEMPLATE PAGE after converting from WORD to EXCEL
Changed IR24 from Word to EXCEL within GSMA Open Connectivity projectIREG Doc57_054 incorporated MCR034 change in the Description for the Cancel Location Test
This document is the specification of IREG End-to-end Functional Capability tests relating to the international roaming of a Mobile Station, belonging to a home PLMN(a), to and within a visited PLMN(b). This document also covers IREG test cases for CS Fallback.
Whilst it is expected that roaming will be a bilateral activity between two PLMNs, please note that this document is written in a unidirectional context. Hence Roaming is taking place by a MS(a) to VPLMN(b) only. There is no reference to a Mobile Station MS(b) visiting PLMN(a).
To complete IREG End-to-end Functional Capability tests for bilateral roaming, it is necessary to perform the tests in this document twice: the second time the real identities of PLMN(a) and PLMN(b) are swapped.
· SCCP testing· Exchange of PLMN numbering, addressing and routing data [see Stage 3: IREG PRD IR23]· Testing of Transferred Account Procedure, billing applications and any inter-PLMN financial statement; [see TADIG PRD TD06]. However the production of a Toll Ticketing file, for use in the TADIG Stage 3 testing is included.
· Definition of operation and maintenance procedures such as contact points for fault reporting and notification of planned works. [see Stage 3: IREG PRD IR23]
· PLMN ("Public Land Mobile Network") including RSS ("Radio Sub-System") and NSS ("Network Sub-System"). PLMN (a) indicates the "ath" PLMN.· VPLMN ("Visited PLMN")· HPLMN ("Home PLMN")· HLR ("Home Location Register")· VMSC ("Visited Mobile Services Switching Centre"), including the always co-located entities MSC ("Mobile Services Switching Centre") and VLR ("Visitor Location Register")
· GMSC ("Gateway Mobile Services Switching Centre")· MS ("Mobile Station"). MS (b) indicates that the MS subscription is managed by PLMN(b)· PSTN telephone (b) indicates a PSTN telephone in the country which contains PLMN (b)· DN ("Directory Number")· MME ("Mobility Management Entity")
IR24 General 4(34) document.xls
The specific objectives are to prove that:
(a)
(b) Incoming speech calls to MS (a) can be handled by: (i) HPLMN(a) asking for Roaming Number from VPLMN (b)(ii) HPLMN(a) successfully routing the call(iii) VPLMN(b) connecting the call
c) Outgoing speech calls by MS(a) to the VPLMN(b) are handled for: -(i) Emergency calls(ii) Calls to VPLMN(b) country (i.e. local calls)(iii) International calls(iv) Calls to any other/relevant "Operator Services" on VPLMN(b)/PSTN(b)
(d) Supplementary Services can be registered and activated, and their status interrogated by the MS (a).
(e) Specific Supplementary Services can be invoked successfully: -
(i) Call Barring: All Outgoing Calls(ii) Call Barring: Outgoing International Calls(iii) Call Barring: Outgoing International Calls except to Home Country(iv) Call Forwarding on not reachable (Before IMSI detach)(v) Call Forwarding on Not reachable (After IMSI detach - If Attach/Detach supported by VMSC)(vi) Call Forwarding on Busy(vii) Call Forwarding on No Reply
(f) Specific Supplementary Services can be activated by a MS which is roamed.
(g) Barring of Incoming Calls when roamed
(h) Short Message Service is available between Home Country Service Centre and roamed mobile station.
(i)
1.4. Strategy for Testing
In order to maximize the efficiency of testing, the test cases have been drawn up so as to minimize the requirement for simultaneous joint activity by both PLMN (a) and PLMN (b).
Accordingly, the program of testing forms three distinct components.(i) HPLMN(a) issues pre-programmed SIMs and programmed HLR(ii) PLMN(b) performs tests(iii) PLMN(b) and HPLMN(a) discuss results.
It is anticipated that further updated issues will be made in response to IREG comments and following experience of testing.
It is anticipated that further Issues will be needed to extend the testing beyond GSM phase 1.
1.3. Objective of Tests
The fundamental objective of this testing is to confirm the capability, and sample the quality of service which GSM users will receive when roaming from their Home PLMN (a) to PLMN (b). Consequently the tests are restricted to top-level capability testing. There is no provocative or inopportune behavior testing: this type of testing forms part of the Stage 1 testing [see IREG PRD IR23].
Because the testing is at a top-level, its scope includes checking the correct working of user features and any network features required by the HPLMN (e.g. barring). The scope also includes the confirmation of acceptable quality of transmission, absence of echo and call set-up delay.
The overall objective of the tests is to confirm that the functions and features, which are already known to operate correctly within each separate PLMN, will also operate correctly for Inter-PLMN roaming.
When there is no difference in a PLMN's operation between Home and Visiting MSs, then there is no requirement to confirm successful operation during Stage 3 Testing - an example of this is "handover." In addition where a feature involves only the Gateway MSC and HLR, (both located in the HPLMN), then there is no requirement to test during Stage 3.
"Location updating" and the associated "Inserting of Subscriber data" can be successfully completed for MS (a) roaming to PLMN (b). In addition, that the "cancel location" service operates correctly.
Incoming and Outgoing CS Fallback calls, SMS over SGs/S102 can be made successfully
If either the HPLMN or VPLMN contain GSM Network / CS Fallback Entities which are supplied by more than one manufacturer, then the test cases should be repeated for each manufacturer. Therefore if HPLMN(a) contains HLR and GMSC from "m" suppliers, and the VPLMN(b) contains VMSC from "n" suppliers, then potentially the tests should be performed m*n times. The actual number of repeats of the test cases is for bilateral agreement between the HPLMN and VPLMN. However if agreement is not straightforward, it is for the HPLMN to decide the scope of the repeating of test cases, because it is ultimately responsible to its customers for the service supported when roaming.
An associated optional objective is to use the Toll Ticketing function of the VMSC to generate a live data file, which is used by the TADIG Stage 3 testing. After transfer to the HPLMN via TADIG processes, the HPLMN may use the information from the test results to validate the details of the Toll tickets, however this is not part of the GSM Association IREG roaming testing.
It is recognized that some parts of this specification are of greater priority than others. The test cases concerning the “Basic Service" (Section 2.1) are of greater priority than those for the “Supplementary Services” (Section 2.2).
IR24 General 5(34) document.xls
1.5 Equipment Requirements
The Equipment described in this Section is necessary for undertaking the test cases described in Section 2.
1.5.1 User Equipment
(a) Two Mobile Equipments supplied by VPLMN(b)
(b) Two PSTN telephones in PSTN(b)
(c) Two SIMs supplied by HPLMN(a).The supply of additional SIMs may be agreed by the HPLMN(a) and VPLMN(b), typically for the purposes of:
(i) Spare cards in case of failure(ii) Allocation from different HLRs
(d) Two SIMs supplied by VPLMN(b)
1.5.2 Test Equipment
(a)
(b)
(c) Stopwatch capable of measuring perceived chargeable duration of calls to an accuracy of one second.
It is expected that manual selection will be used to select VPLMN(b) when using the SIMs supplied by HPLMN(a). To facilitate subsequent automatic selection it is required that bits b6 and b5 of byte 2 of the SIM Service Table (Data-field 38) be set to "1", and the chosen VPLMN is in the PLMN Selector (Data-field 30)
In order to replicate the service that general roamers will encounter, it is required that any SIM used in the tests shall have one access class out of the classes 0-9 defined. No other access class (e.g. 10 or 11-15) shall be defined.
It is recommended that on any new SIM the Location Update Status field is set to "Status not updated" before the tests start (bit b2 set to "0" and bit b1 set to "1", of byte 11 of Data-field 7E).
The availability of a CCITT # 7 tester able to decode SCCP, TCAP and MAP is highly advisable, but not strictly necessary for these tests. However it is essential for any analysis of test case failures.
Clock capable of being used to allow testing personnel to record call start and chargeable start ( i.e. answer) time of calls to an accuracy of better than five seconds. If possible, the clock shall be adjusted to be in alignment with the internal MSC clock which is used for the Toll Ticketing function.
IR24 General 6(34) document.xls
2 TEST CASES
The test cases are in four groups:
Basic Service (Mobility Management and Telephony)Supplementary ServicesShort Message Service (Point to point)CS Fallback and SMS over SGs/S102
The results of the test cases shall be recorded in Appendix A.
Figure 1: Test case Configuration
2.1 Basic Service Test Cases
It should be noted that no supplementary services are active during the Test cases which are described in Section 2.1.
2.1.1 Location Update by MS(a) in VPLMN(b)
Preconditions: MS1 contains SIM of HPLMN(a)No VLR record exists for MS. HLR record contains basic and supplementary service information.
The test configuration is shown in Figure 1 below. The test configuration for CS Fallback and CS Fallback for 1xRTT are shown in Figure 2 and Figure 3, respectively. It is anticipated that it may be necessary to monitor both signaling messages and voice calls on any of the Network Entity interfaces shown in the diagram. However this is not a firm requirement for this test specification.
1. regular scenario is PSTN (b2) > MS1 (a) w. Call Forw. to > PSTN (b1)2. regular scenario PSTN (b2) > MS1(a) 3. regular scenario MS1(a) > MS2(a)4. Regular scenario MS1(a) > PSTN (c1)5. Regular scenario MS1(a) > PSTN (a)
To provide valid toll ticketing recording, then both the clock used to note call start and finish times for the test result sheets, and the internal VMSC clock must be checked against each other and set to an accuracy of better than five seconds. Note the VMSC clock must only be altered in conjunction with local operating rules and procedures because all Toll Tickets will be affected by any alteration.
HLR/ HSS
GMSC
PLMN(a)
MME
VLR/VMSC
eNB
RNC/NodeB
MS(a)USIM(a)
MS(b)USIM(b)
PSTN
PLMN(b)
1xRTT HLR/HSS
1xRTTMSC
PLMN(a)
MME
1xRTTMSC
eNB
1xRTTCS Access
MS(a)USIM(a)
MS(b)USIM(b)
PSTN
PLMN(b)
Figure 2: CS Fallback and SMS over SGs
Figure 3: CS Fallback and SMS over S102 for CDMA2000 1xRTT based systems
IR24 General 7(34) document.xls
Action:
Expected Reult:
Comments:
Power-up MS1(a) and perform location registration on VPLMN(b)Check VLR record for the IMSI/MSISDN of MS1.
Successful result if VLR record is identical to the pre-testing information supplied by PLMN(a).Unsuccessful result if any of the basic and supplementary services tested by this document or all of the information is missing.
This test case confirms operation of Update Location and Insert Subscriber Data procedures. It checks the support of the relevant MAP operations, TCAP processes and SCCP addressing for both E214 and E164 Global Titles, between the HLR(a) and VMSC(b).
IR24 General 8(34) document.xls
2.1.2 Operator Control of Service
A) Location Cancellation for MS(a) Subscription held in VPLMN(b).
Preconditions: VLR in VPLMN(b) contains subscription information for MS(a)
Action:
Expected Result:
Comments:
Preconditions: VLR in VPLMN(b) contains subscription information for MS(a)
Action:
Expected Result: Successful result if VLR record for MS(a) contains ODB information and none of the call attempts is successful.
Comments: This test case confirms that ODB procedures operate correctly.
2.1.3 MS1(a) Calls MS2(a), Both Roamed In VPLMN(b)
Preconditions: MS1(a) and MS2(a) have location updated successfully in VPLMN(b).
Action:
Expected Result:
Comments:
2.1.4
PSTN Telephone(b2) Calls MS1(a) (VLR has lost the record for MS1(a) )
Preconditions: MS1(a) does not have a record in VMSC(b) but HLR(a) indicates that MS1 (a) is roamed to VMSC(b).
MS1(a) is active, but has not location updated in (periodic, normal or IMSI attach) since VLR record was removed.
Action:
Expected Result:
Comment:
2.1.5 PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Has Performed IMSI Detach.
PSTN Telephone(b2) Calls MS1(a) Roamed To Country(b) - IMSI Detached (Power off)
Precondition: MS(a) is detached or deregistered in the VLR in VPLMN(b) but VLR(b) contains a record for MS(a)
Action:
Expected Result: Successful result if PSTN telephone(b2) receives an announcement that MS1(a) cannot be reached or is unavailable.
Comments:
Establish a MOC from MS(a).HPLMN(a) personnel deletes MS(a) subscription from HLR eitherusing HLRs Man-Machine Interface or via Administrative Data Centre (ADC) input to HLR.Check VLR for record of MS(a).
Successful result if VLR record for MS (a) has been erased andwhen the established MOC is cut.
This test case confirms that the "cancel location" procedureoperates correctly and cuts the established call.
B) Operator Determined Barring (ODB) for All Outgoing Calls and All Incoming Calls when on Roaming of MS(a)
HPLMN(a) personnel activates ODB for All Outgoing Calls andAll Incoming Calls when on Roaming for MS(a) from HLR eitherusing HLR’s Man-Machine Interface or via Administrative DataCentre (ADC) input to HLR.
Check VLR for record of MS(a).
MS1(a) establishes call to MS2(a).Call answered and held for one minute.Quality assessed.
Successful result if call is established in 30 seconds, and call is stable in unanswered and answered phases, and there is no perceptible echo to either user, and call remains in intelligible/high quality conversation phase for one minute. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. This test will also confirm the correct delivery of CLI information (or lack thereof) in a roaming scenario.
This test case confirms Mobile Originated and Mobile Terminated call sequences for roamers. It checks the support of the Provide Roaming Number MAP operation between PLMN(a) and PLMN(b). It checks the ability to establish international call between the two PLMNs using roaming numbers. It implies the ability of the PLMNs to disable excessive instances of echo control devices.
PSTN Telephone In Country Containing PLMN(b) Calls MS1(a), Which Has Roamed To VPLMN(b), But The VLR Has Lost The Record For MS1(a).
PSTN telephone(b2) calls MS1(a).If call is successfully established, then maintain answered call for one minute. Assess quality.If call attempt returns "System Failure" message, then make MS1(a) perform a location update, and repeat this test case.
Successful result if either first call-attempt is established or "System Failure" message is returned within 30 seconds. In addition the answered call, whether establish on the first attempt or after the location update, has no perceptible echo to either user, and that an acceptable quality connection can be maintained. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. This test will also confirm the correct delivery of CLI information (or lack thereof) in a roaming scenario.
This test case confirms the VLR recovery mechanism, which may use the Send Parameters MAP operation. It also checks that the Gateway MSC (in PLMN(a)) correctly inserts an echo cancellation device, and implies that other instances of echo control devices have been correctly configured.
Check that the subscriber is detached in the VLR, if possible.Attempt a call from PSTN telephone(b2) to MS1(a)
This test case confirms that the "absent subscriber" reason is given as the result of a roaming number enquiry to the VLR(b) where the MS(a) has performed an IMSI detach. The detach status of the subscriber should be checked in the VLR, because the switching-off procedure of a Mobile does not guarantee that the subscriber will be detached, because no acknowledgement message is sent from the VLR to the MS. The announcement may be in the language of PLMN(a), as it can be raised at the GMSC(a), but can also be in the language of the PSTN in the country containing PLMN(b).
IR24 General 9(34) document.xls
2.1.6
PSTN Telephone(b2) Calls MS1(a) Roamed To Country(b) - No Response to Paging or Pre-Paging (Battery off)
Pre-Check:
If: NO continue with A.YES continue with B
A) PagingPrecondition: MS1(a) is attached.
Action:
Expected Result: Successful result if PSTN telephone(b2) receives an announcement in the language of PLMN(b) that MS1(a) cannot be reached.
Comments:
B) Pre-PagingPrecondition: MS1(a) is attached.
Action:
Expected Result: Successful result if PSTN telephone(b1) receives an announcement in the language of HPLMN(a) that MS1(a) cannot be reached.
Comments:
2.2 Supplementary Service Test Cases
Test cases 2.2.1 to 2.2.8 require that the MS(a) is able to manage its own Supplementary Service registration and activation status.
The Call Forwarding test cases should be performed by using the "+" key.
It should be noted that only those Supplementary services referenced in the "Preconditions" notes are to be active.
2.2.1 Barring Of All Outgoing Calls BAOC]
Preconditions: HLR entry contains "SS:BAOC:Active" [Set by MS]
Action:
Expected Result:
Comment: This test case confirms the support of this Supplementary Service by the VPLMN (b). It also indicates that Emergency Services are available to visitors from HPLM(a).
2.2.2. Barring Of Outgoing International Calls [BOIC]
Preconditions: HLR entry contains "SS:BOIC:Active". [Set by MS]
Action:
Expected Result:
Comment: This test case confirms the support of this Supplementary Service by the VPLMN(b).
PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Is Not Able To Respond To Paging or Pre-Paging (Battery off)
Check if the HPLMN(a) and PLMN(b) support Pre-paging, and HPLMN(a) sets a “Pre-paging supported” parameter in MAP_SEND_ROUTING_INFORMATION and MAP_PROVIDE_ROAMING_NUMBER. (YES/NO)
Disable MS(a) so that it is unable to respond to paging [Note MS(a) must not send IMSI Detach message, while being disabled]. Check that the subscriber is attached in the VLR, if possible.Immediately attempt a call from PSTN telephone(b2) to MS1(a)
This test case confirms that the correct response is given when a call is made to a roamed mobile that does not respond to paging. Note that there will be some delay before the failure announcement is given while the paging is performed. The announcement will be in the language of PLMN(b).
HPLMN(a) and PLMN(b) support Pre-paging, and HPLMN(a) sets a “Pre-paging supported” parameter in MAP_SEND_ROUTING_INFORMATION and MAP_PROVIDE_ROAMING_NUMBER.
Disable MS(a) so that it is unable to respond to pre-paging [Note MS(a) must not send IMSI Detach message, while being disabled]. Check that the subscriber is attached in the VLR, if possible.Immediately attempt a call from PSTN telephone(b1) to MS1(a)
This test case confirms that the correct response is given when a call is made to a roamed mobile that does not respond to Pre-paging. Note that there will be some delay before the failure announcement is given while the Pre-paging is performed. The announcement will be in the language of HPLMN(a).
(i) MS(a) attempts Emergency Call [112 keyed on MS](ii) MS(a) attempts call to PSTN.
Successful result if call "i" succeeds and call "ii" fails.(i) MS(a) attempts Emergency Call [112 keyed on MS](ii) MS(a) attempts call to PSTN.
(i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which uses a signaling system to obtain the identity of the Calling Party](ii) MS(a) attempts outgoing call to Home PLMN Country.
Successful result if call "i" succeeds and call "ii" fails.(i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which uses a signaling system to obtain the identity of the Calling Party](ii) MS(a) attempts outgoing call to Home PLMN Country.
It also indicates that General Operator Services are available to visitors from HPLMN(a), that any special routing operates successfully, and that any Calling Party information displayed to the operator is appropriately presented.
IR24 General 10(34) document.xls
2.2.3 Barring Of Outgoing International Calls except To Home PLMN Country [BOICexHC]
Pre-Check Check if the VPLMN does support the SS:BOICexHC. (YES/NO)YES continue with A.NO continue with B.
A 2.2.3.1 Activated Service is BOICexHC (VPLMN supports SS: BOICexHC)Preconditions: HLR entry contains "SS: BOIC ex HC: Active" [Set by MS]
Action:
Expected Result: Successful result if calls of test cases "i" and "ii" succeeds, and the call of test case "iii" fails.
B 2.2.3.2 Activated Service is BOICexHC (VPLMN does not support SS: BOICexHC):Preconditions: HLR entry contains "SS: BOICexHC: Active" [Set by MS]
Action:
Expected Result: Successful result, if the call (i) succeeds and call (ii) fails.
Comment:
2.2.4 Barring Of All Incoming Calls (BAIC / BAICroaming)
Pre-Check: Check if the VPLMN does support the SS: BAICroaming. (YES / NO)
If: YES continue with A.NO continue with B.
A) Preconditions: HLR no entry for Barring of all incoming calls when roaming in VPLMN.
Action:
Expected Result: Successful result, if calls fail
B) Preconditions: HLR no entry for Barring of all incoming calls.
Action:
Expected Result: Successful result, if calls fail
Comment: This test case confirms the support of the activation of this Supplementary Service when roaming inside VPLMN.
2.2.5 Call Forwarding on Not Reachable (CFNRC -Before IMSI Detach TAKE BATTERY OFF WHILE PHONE IS SWITCHED ON)
Preconditions: HLR entry for MS(a1) contains "SS : CFNRc: Active "Forwarded -to-address is PSTN telephone(b1). [Set by MS]
MS (a1) is attached. If used, MS(a2) is attached.
Action:
Expected Result:
Comments: This test case confirms that CFNRc (before IMSI detach) operates correctly and implies that echo cancellers are correctly configured.
Note the announcement could be in the language of PLMN(b), as the call was forwarded by the VMSC(b).
(i) MS(a) attempts an outgoing call to Home-PSTN-telephone(a).
(ii) MS(a) attempts a call to the country, where the MS is presently located by making use of the international number format.
(iii) MS(a) attempts an international call to any other country than mentioned in (i) or (ii). (International Format should be +CC ...)
(i) MS(a) attempts a call to local PSTN.
(ii) MS(a) attempts outgoing call to Home PLMN country.
This test case confirm the support of this Supplementary Service by the VPLMN(b). In the case VPLMN(b) does not support the SS: BOICex HC then the switch makes a Functional fallback because it supports BOIC.
Preconditions: HLR no entry for Barring of all incoming calls when roaming in VPLMN.MS(a) in VPLMN (b) activates the SS: BAICroaming PSTN (b) calls MS(a)
Preconditions: HLR no entry for Barring of all incoming calls.
MS(a) in VPLMN (b) activates the SS: BAIC PSTN(b) calls MS(a)
In some PLMNs there are HLR restrictions on registering a forwarded-to-address which is outside the HPLMN country. There are also some PLMNs in which MSCs prevent the invocation of a call forward towards a distant country. In these cases the forwarded-to-address shall be MS(a2). If MS(a2) cannot be used, then the forwarded-to-address shall be PSTN telephone(a).
Disable MS(a1) so that it is unable to respond to paging [Note MS(a1) must not send IMSI Detach message, while being disabled. This can be achieved by removing the battery while the phone is switched on].Immediately attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN telephone(b1), MS(a2) or PSTN telephone(a).
Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN(b2) may receive an announcement that the call is being forwarded.
IR24 General 11(34) document.xls
2.2.6 Call Forwarding on Not Reachable (CFNRC -After IMSI Detach SWITCH THE PHONE OFF)
Preconditions: HLR entry for MS(a1) contains "SS CFNRc: Active: Forwarded-to-address is PSTN telephone(b1)". [Set by MS]
MS (a1) is detached or deregistered in the VLR, but the VLR contains a record for MS(a1).If used, MS(a2) is attached.
Action:
Answer resultant call to PSTN(b1), MS(a2) or PSTN(a).
Expected Result:
Comments: This test case confirms that CFNRc (after IMSI detach) operates correctly and implies that echo cancellers are correctly configured.
Note the announcement will be in the language of PLMN (a) as the call was forwarded by GMSC(a).
2.2.7 Call Forwarding on Busy (CFB)
Preconditions: HLR entry for MS (a1) contains SS: CFB: Active: Forwarded-to-address is PSTN telephone (b1). [Set by MS]
Action:
Expected Result:
Comments: This test case confirms that CFB operates correctly.
2.2.8 Call Forwarding on No Reply (CFNRY)
Preconditions: HLR entry for MS (a1) contains "SS: CFNRy: Active: Forwarded-to-address is PSTN telephone (b1). [Set by MS]
MS(a1) is attached and idle.If used, MS(a2) is attached.
Action:
Expected Result:
Comments: This test case confirms that CFNRy operates correctly. It also confirms that the procedure “Interrogate Call Forward Information” operates correctly.
2.3
2.3.1 Mobile ORIGINATED and Terminated Short Message Service (SMS-MO)
Preconditions:
Action:
Expected Result:
Comments: This test case confirms correct operation of SMS - Mobile Originated / Terminated Services including "Message Waiting" and "Note MS Present" procedures.
In some PLMNs there are HLR restrictions on registering a forwarded-to-address which is outside the HPLMN country. There are also some PLMNs in which MSCs prevent the invocation of a call forward towards a distant country. In these cases the forwarded-to-address shall be MS(a2). If MS(a2) cannot be used, then the forwarded-to-address shall be PSTN telephone(a).
Check that the subscriber MS(a1) is detached in the VLR, if possible.
Attempt a call from PSTN telephone(b2) to MS(a1).
Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.
The detached status of the subscriber should be checked in the VLR, because the switching-off procedure of a Mobile does not guarantee that the subscriber will be detached, because no acknowledgement message is sent from the VLR to the MS.
In some PLMNs there are HLR restrictions on registering a forwarded-to-address which is outside the HPLMN country. There are also some PLMNs in which MSCs prevent the invocation of a call forward towards a distant country. In these cases the forwarded-to-address shall be MS(a2). If MS(a2) cannot be used, then the forwarded-to-address shall be PSTN telephone(a).
MS (a1) is in conversation state.If used, MS(a2) is attached.
Attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN(b1), MS(a2) or PSTN(a).
Successful result if indicate the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.
MS(a) initiates an “Interrogate Call Forward Information”. MS(a) displays information. Attempt a call from PSTN telephone(b2) to MS(a1). After a period of time during which MS(a1) "rings", call is diverted to PSTN(b1), MS(a2) or PSTN(a) where it is answered.
Successful result if MS(a) displays equivalent information to that stored in HLR and if MS(a1) "rings" for length of time equal to "No Reply Timeout" value stored in HLR, and call is completed to PSTN(b1), MS(a2) or PSTN(a), and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.
SMS Test Cases
SMS-MO/MT is provisioned in HLR subscription. MS1(a) and MS2(a) are registered in VPLMN(b).
Switch on MS1(a). Switch off MS2(a).
Use MS1(a) to transmit a 160 character Short Message to MS2(a) via the Home Country SMS - Service Centre with Message Waiting priority selected.
Switch on MS2(a)
Await delivery of Short Message to MS2(a)Check contents of Short Message with those transmitted.
Successful result if Short Message is correctly delivered within [2] minutes of switching MS2(a) on.
IR24 General 12(34) document.xls
2.4 SMS Interworking Test Cases2.4.1 Information on the testing (SMS-IW)
Preconditions: Please find below some information about how to perform it.
1. For the whole SMS IW test you will have to switch the MS2 off and wait for at least 2 minutes after you sent the SMS before you switch the phone on again,
2. The several times you will have to report consist on the time you havea - sent the SMSb - switched the MS2 on (and not when UL is done)c - received the SMS on the MS2
2.4.2.1 Details of the tests
Therefore, SIM (a) of PLMN (a) has to be able to roam on PLMN (b), so PLMN (a) and (b) must have a roaming agreement.
2.4.2.1 SMS Test Results in case (WITH ROAMING AGREEMENT), Details of the test C.2.4.2.1
2.4.2.1 Mobile(a) in PLMN(b) to Mobile(b) in PLMN(b)
3. Please do not forget to fill, sign and fax us the Appendix with all our required and selected test cases. (see 2nd sheet "IR24 Setup Info & COMPL. CERT.")
In order to be able to proceed the test independently from the roaming partner, SMS IW test can be performed with one SIM cards of the PLMN (a) and one SIM card of the PLMN (b) both located on the PLMN (b).
In the case of a roaming agreement as described above, the tests to be performed are the C.2.4.2.1 and C.2.4.2.2
HLR of mobile b
SMS-C (a)MSC/VLRwhere is mobile a
SMS Submitt Cg SCCP @ = MSC/VLR (b)
Cd SCCP @ = SMS-C (a)
SMS Submitt ack
SMS-C (a)SRI for SM ack
SRI for SM Cg SCCP @ = SMS-C (a)
Cd SCCP @ = MSISDN (b)
SMS-C (a)SMS Delivered ack
SMS Delivered Cg SCCP @ = SMS-C (a)
Cd SCCP @ = MSC/VLR (b)
MSC/VLRwhere is mobile b
PLMN aPLMN b
Mobile (a)of PLMN a
Mobile (b)of PLMN b
PLMN b
Mobile (a)of PLMN a
Mobile (b)of PLMN b
C.2.4.2.1
C.2.4.2.2
IR24 General 13(34) document.xls
2.4.2.2 Details of the test C.2.4.2.2 (WITH ROAMING AGREEMENT)2.4.2.2 Mobile(b) in PLMN(b) to Mobile(a) in PLMN(b)
2.4.3 Tests without roaming agreement
If PLMN (a) and (b) do not have roaming agreements, the tests described above can not be performed, therefore, tests for SMS IW has to be performed in coordination with the SMS IW partner.
In the case of non roaming agreement, the tests to be performed are the C.2.4.3.1 and C.2.4.3.2.
2.4.3.1 Details of the test C.2.4.3.1 (NON ROAMING AGREEMENT)2.4.3.1 Mobile (b) in PLMN (b) to Mobile (a) in PLMN (a)
HLR of mobile a
SMS-C (b)MSC/VLRwhere is mobile b
SMS Submitt Cg SCCP @ = MSC/VLR (b)
Cd SCCP @ = SMS-C (b)
SMS Submitt ack
SRI for SM ack
SRI for SM Cg SCCP @ = SMS-C (b)
Cd SCCP @ = MSISDN (a)
SMS-C (b)
SMS-C (b)MSC/VLRwhere is mobile a
SMS Deliver Cg SCCP @ = SMS-C (b)
Cd SCCP @ = MSC/VLR (b)
SMS Deliver ack
PLMN aPLMN b
Mobile (b)of PLMN b
Mobile (a)of PLMN a
HLR of mobile a
SMS-C (b)MSC/VLRwhere is mobile b
SMS Submitt Cg SCCP @ = MSC/VLR (b)
Cd SCCP @ = SMS-C (b)
SMS Submitt ack
SRI for SM ack
SRI for SM Cg SCCP @ = SMS-C (b)
Cd SCCP @ = MSISDN (a)
SMS-C (b)
SMS-C (b)MSC/VLR
where is mobile a
SMS Deliver Cg SCCP @ = SMS-C (b)
Cd SCCP @ = MSC/VLR (a)
SMS Deliver ack
PLMN aPLMN b
Mobile (b)of PLMN b
Mobile (a)of PLMN a
PLMN b
Mobile (b)of PLMN b
PLMN a
Mobile (a)of PLMN a
IR24 General 14(34) document.xls
2.4.3.2 Details of the test C.2.4.3.2 (NON ROAMING AGREEMENT)2.4.3.2 Mobile (a) in PLM (a) to Mobile (b) in PLMN (b)
HLR of mobile b
SMS-C (a) MSC/VLRwhere is mobile a
SMS Submitt Cg SCCP @ = MSC/VLR (a)
Cd SCCP @ = SMS-C (a)
SMS Submitt ack
SRI for SM ack
SRI for SM Cg SCCP @ = SMS-C (a)
Cd SCCP @ = MSISDN (b)
SMS-C (a)
SMS-C (a)MSC/VLR
where is mobile b
SMS Deliver Cg SCCP @ = SMS-C (a)
Cd SCCP @ = MSC/VLR (b)
SMS Deliver ack
PLMN aPLMN b
Mobile (b)of PLMN b
Mobile (a)of PLMN a
IR24 Setup Info & COMPL. CERT. 15(34) document.xls
6 Test case selection and Completion Certificates
6.1 Test case selection and result overview
Roaming Scenario to be Tested
YES / NO
2G / GSM 2G / GSM3G / UMTS 2G / GSM2G / GSM 3G / UMTS
3G / UMTS 3G / UMTS
In the following table the HPLMN should indicate the test cases that are requested to be performed by the roaming partner (VPLMN).
Requested Test-cases & Description Results IREG-comments from "IR24 TEST CASES", if any
1 Y E S 2.1.1 Location Update by MS(a) in VPLMN(b)
1 Y E S 2.1.2 A) Location Cancellation for MS(a) Subscription held in VPLMN(b).
1 Y E S 2.1.2
1 Y E S 2.1.3 MS1(a) Calls MS2(a), Both Roamed In VPLMN(b)
1 Y E S 2.1.4
1 Y E S 2.1.5
1 Y E S 2.1.6
1 Y E S 2.2.1 Barring Of All Outgoing Calls BAOC]
1 Y E S 2.2.2. Barring Of Outgoing International Calls [BOIC]
1 Y E S 2.2.3
1 Y E S 2.2.4 Barring Of All Incoming Calls (BAIC / BAICroaming)
1 Y E S 2.2.5
1 Y E S 2.2.6
1 Y E S 2.2.7 Call Forwarding on Busy (CFB)
1 Y E S 2.2.8 Call Forwarding on No Reply (CFNRY)
1 Y E S 2.3.1 Mobile ORIGINATED and Terminated Short Message Service (SMS-MO)
1 Y E S 2.4.1 Information on the testing (SMS-IW) n/a
1 Y E S 2.4.2.1
1 Y E S 2.4.2.2 Details of the test C.2.4.2.2 (WITH ROAMING AGREEMENT)
1 Y E S 2.4.3.1 Details of the test C.2.4.3.1 (NON ROAMING AGREEMENT)
1 Y E S 2.4.3.2 Details of the test C.2.4.3.2 (NON ROAMING AGREEMENT)
1 Y E S 19.1.1 E-UTRAN Combined Attach by MS(a) in VPLMN(b)
1 Y E S 19.2.1
1 Y E S 19.3.1 #REF!#REF!
1 Y E S 19.4.1 SMS over SGs (Mobile Originated and Mobile Terminated) #REF!#REF!
1 Y E S 19.5.1 1xRTT CS Pre-Registration by MS1(a) in VPLMN(b) #REF!
1 Y E S 19.6.1
1 Y E S 19.7.1 #REF!#REF!
1 Y E S 19.8.1 SMS over S102 (Mobile Originated and Mobile Terminated) #REF!#REF!
1 No 19.9.1 G S M A -SPEC. TEST CASE HEADER 19.9.1 (not in use now)
1 No 19.10.1 G S M A -SPEC. TEST CASE HEADER 19.10.1 (not in use now)
1 Y E S 20.1.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.1.1
1 Y E S 20.2.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.2.1
1 Y E S 20.3.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.3.1
1 Y E S 20.4.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.4.1
1 Y E S 20.5.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.5.1
1 Y E S 20.6.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.6.1
1 Y E S 20.7.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.7.1
1 Y E S 20.8.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.8.1
1 Y E S 20.9.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.9.1
1 Y E S 20.10.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.10.141
6.2 COMPLETION CERTIFICATE related to the in 6.1 required and selected test cases
This certificate confirms the successful completion of selected Tests in 6.1 for Mobile
Subscribers of. HPLM HPLMN > field in TEST CASE PAGE entry H25PLMN Network visited VPLMN > field in TEST CASE PAGE entry H26
Other comments
VPLMN > field in TEST CASE PAGE entry H26 to HPLMN > field in TEST CASE PAGE entry H25
The tests were completed on.Date:
Name: HPLMN TESTER NAME (a) > field in TEST CASE PAGE H28eMail: Tester@ HPLMN > field in TEST CASE PAGE H30
Name: TESTER NAME (b) > field in TEST CASE PAGE H31eMail: Tester@ VPLMN > field in TEST CASE PAGE H33
Date:
Date:
End of Completion Certificate
(H)PLMN(a)
(V)PLMN(b)
Test CaseSelection
n/a (see original entries in IR24 TEST CASES)
B) Operator Determined Barring (ODB) for All Outgoing Calls and All Incoming Calls when on Roaming of MS(a)
PSTN Telephone In Country Containing PLMN(b) Calls MS1(a), Which Has Roamed To VPLMN(b), But The VLR Has Lost The Record For MS1(a).
PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Has Performed IMSI Detach.
PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Is Not Able To Respond To Paging or Pre-Paging (Battery off)
Barring Of Outgoing International Calls except To Home PLMN Country [BOICexHC]
Call Forwarding on Not Reachable (CFNRC -Before IMSI Detach TAKE BATTERY OFF WHILE PHONE IS SWITCHED ON)
Call Forwarding on Not Reachable (CFNRC -After IMSI Detach SWITCH THE PHONE OFF)
n/a (see original entries in IR24 TEST CASES)
SMS Test Results in case (WITH ROAMING AGREEMENT), Details of the test C.2.4.2.1
CS Fallback Mobile Originated Voice Call - MS1(a) Calls MS2(a), Both Roamed In VPLMN(b)CS Fallback Mobile Terminated Voice Call - MS2(a) Calls MS1(a), Both Roamed In VPLMN(b)
1xRTT CS Fallback Mobile Originated Voice Call - MS1(a) Calls MS2(a), Both Roamed In VPLMN(b)1xRTT CS Fallback Mobile Terminated Voice Call - MS2(a) Calls MS1(a), Both Roamed In VPLMN(b)
Toll Ticket file is being forwarded from PLMN via TADIG procedures.(Delete if not applicable)
The testing team in HPLMN
The testing team in VPLMN
Signed for HPLMN (a)
Signed for VPLMN (b)
When you have selected the Test Cases you want performed please click here
When you have selected the Test Cases you want performed please click here
IR24 Test Cases 16(34) document.xls
A.1.1 Roaming Scenario to be Tested(H)PLMN(a) (V)PLMN(b) YES / NO2G / GSM 2G / GSM 03G / UMTS 2G / GSM 02G / GSM 3G / UMTS 03G / UMTS 3G / UMTS 0LTE 3G / UMTS 0
A.1.2 Network Operator Information
PSTN (b1) from no. I22 used for CFxPSTN (b2) from no. I23 (regular A-Pty)
Home PSTN Country number (a) HPLMN PSTN (a) from field I24
(H)PLMN (a) HPLMN > field in TEST CASE PAGE entry H25(V)PLMN (b) VPLMN > field in TEST CASE PAGE entry H26Date of TestsTesting personnel PLMN(a) HPLMN TESTER NAME (a) > field in TEST CASE PAGE H28Tel/Fax:email PLMN (a):Testing personnel PLMN(b) TESTER NAME (b) > field in TEST CASE PAGE H31Tel/Fax: email PLMN (b): Tester@ VPLMN > field in TEST CASE PAGE H33HLR Identity/IdentitiesHLR Manufacturer(s)HLR Software Build Level(s)GMSC Identity/IdentitiesGMSC Manufacturer(s)GMSC Software Build Level(s)VMSC Identity/IdentitiesVMSC Manufacturer(s)VMSC Software Build Level(s)SMS-SC Identity / Identities SMS-SC Manufacturer(s)SMS-SC Software Build Level(s) Comments
A.1.3 Toll Ticket Configuration
Call Toll Ticketing in use at VMSC? [Yes/No]Supplementary Service activity Toll Ticketing in use at VMSC? [Yes/No]Toll Ticketing in use at GMSC for Roaming call legs? [Yes/No]Will VMSC Toll Ticket file be transferred to VPLMN Computing Centre? [Yes/No]Will VMSC Toll Ticket file be transferred to the HPLMN from VPLMN? [Yes/No]Method of transfer of Toll Ticket File to HPLMN [Via TADIG mechanism /other]Comments
Notes:
A 2.1 Basic Service Test Cases
The numbering of the test result sections within this appendix is identical to the associated Test case from section 2 of the main document.
A 2.1.1 Location Update by MS(a) in VPLMN(b)
VLR Record contents:
MSISDN MS1 (a) f.A1.2 I16IMSI MS1 (a) f.A1.2 I17
TeleservicesSPEECH [Y/N]SMS MO [Y/N]SMS MT [Y/N]Fax [Y/N]Bearer ServicesSupplementary ServicesBAOC [Y/N]BOIC [Y/N]BOICexHC [Y/N]CFB [Y/N] C NumberCFNRy [Y/N] C NumberCFNRc [Y/N] C NumberCW [Y/N]CH [Y/N]MPTY [Y/N]AOCC [Y/N]AOCI [Y/N]OthersHLR E164 AddressComments
MSISDN MS2 (a) f.A1.2 I18IMSI MS2 (a) f.A1.2 I19
TeleservicesSPEECH [Y/N]SMS MO [Y/N]SMS MT [Y/N]Fax [Y/N]Bearer ServicesSupplementary ServicesBAOC [Y/N]BOIC [Y/N]BOICexHC [Y/N]CFB [Y/N] C NumberCFNRy [Y/N] C NumberCFNRc [Y/N] C NumberCW [Y/N]CH [Y/N]MPTY [Y/N]AOCC [Y/N]AOCI [Y/N]OthersHLR E164 AddressComments
Testcase Result [PASS / FAIL / NOT PERFORMED]
IREG 24 Test Results for Mobile Stations of PLMN(a) Roaming to PLMN(b)
all test numbers below, will be used for testing purposes and could be manual changed with different values within a later test, at each time during the test, if it is required.
MSISDN MS1 (a) MSISDN MS1 (a) f.A1.2 I16IMSI MS1 (a) IMSI MS1 (a) f.A1.2 I17MSISDN MS2 (a) MSISDN MS2 (a) f.A1.2 I18IMSI MS2 (a) IMSI MS2 (a) f.A1.2 I19MSISDN MS2 (b) MSISDN MS2 (b) f.A1.2 I20 used for SMS-IWIMSI MS2 (b) IMSI MS2 (b) f.A1.2 I21 used for SMS-IWDirectory Number (DN) of PSTN telephone (b1) (FORW. TO PARTY at CF-tests)Directory Number (DN) of PSTN telephone (b2) (regular CALLING PARTY)
Tester@ HPLMN > field in TEST CASE PAGE H30
1. If Toll Ticketing is not in use then the line items marked with an asterisk (*) may be omitted from these Test Result Sheets. 2. If Supplementary Service activity Toll Ticketing is not in use there is no need to write the time at the lines marked with a plus (+).
action:...........
Power-up MS1(a) and perform location registration on VPLMN(b)Check VLR record for the IMSI/MSISDN of MS1.
expected result: ......
Successful result if VLR record is identical to the pre-testing information supplied by PLMN(a).Unsuccessful result if any of the basic and supplementary services tested by this document or all of the information is missing.
MSISDN MS1 (a)IMSI MS1 (a)
MSISDN MS2 (a)IMSI MS2 (a)
IR24 General Page Setup Page TADIG PageTemplates Page InstructionsTest Cases Page
IR24 Test Cases 17(34) document.xls
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
IR24 Test Cases 18(34) document.xls
A.2.1.2 Operator Control of ServiceA) Location Cancellation for MS(a) Subscription held in VPLMN(b).
VLR Record contents prior to cancellation
MSISDN MS1 (a) f.A1.2 I16IMSI MS1 (a) f.A1.2 I17
VLR record erased? [Yes/No]Time delay between HLR deleting subscription and VLR erasing record SecsComments Secs
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
B) Operator Determined Barring (ODB) for All Outgoing Calls and All Incoming Calls when on Roaming of MS(a)
MSISDN MS1 (a) f.A1.2 I16IMSI MS1 (a) f.A1.2 I17
Operator performed barring from HLR [Yes/No]VLR record contains barring tags [Yes/No]Perform a call from MS(a). Is it successful? [Yes/No]Call MS(a). Is it successful? [Yes/No]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.1.3 MS1(a) Calls MS2(a), Both Roamed In VPLMN(b)
MSISDN of originating MS (i.e. MS1(a)) MSISDN MS1 (a) f.A1.2 I16IMSI MS1 (a) f.A1.2 I17MSISDN MS2 (a) f.A1.2 I18 Info Info Info InfoIMSI MS2 (a) f.A1.2 I19 Alert Time
Time of start of call (i.e. SEND key operation) (hrs:mins:secs) 0 3 2 -3Delay between SEND key operation at MS1(a) and MS2(a) alerting secs 0:00:00 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 2 0
secs 0:00:00Quality of call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No]If Yes, to which MS? [MS1(a) / MS2(a)] (i) Is the MSISDN of MS1(a) displayed at MS2(a) in proper format? [Yes/No]IF NO, what does MS2(a) display?
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.1.4 PSTN Telephone(b2) Calls MS1(a) (VLR has lost the record for MS1(a) )
Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty)MSISDN MS1 (a) f.A1.2 I16 Info Info Info InfoIMSI MS1 (a) f.A1.2 I17 Alert Time
Time of start of call (i.e. SEND key operation) (hrs:mins:secs) 0 3 2 -3
secs 0:00:00 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 2 0
secs 0:00:00Was first call successful? [Yes/No]Was location update sequence originated from the Mobile Station necessary ? [Yes/No]Quality of successful call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No]If Yes, to which party? [PSTN/MS1(a)] Is the Directory Number (DN) of Telephone(b) displayed at MS1(a) in proper format? [Yes/No]IF NO, what does MS1(a) display?
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.1.5 PSTN Telephone(b2) Calls MS1(a) Roamed To Country(b) - IMSI Detached (Power off)
Successful result if PSTN telephone(b2) receives an announcement that MS1(a) cannot be reached or is unavailable.
Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty)MSISDN MS1 (a) f.A1.2 I16 Info InfoIMSI MS1 (a) f.A1.2 I17
(hrs:mins:secs) 1 0Time of start of "not reachable" announcement (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 2 0
Chargeable Call Duration (i.e. perceived answer until end of call) secs 0:00:00
Language of announcement
Text of announcement
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
action:...........
Establish a MOC from MS(a).HPLMN(a) personnel deletes MS(a) subscription from HLR eitherusing HLRs Man-Machine Interface or via Administrative Data Centre (ADC) input to HLR.Check VLR for record of MS(a).
expected result: ......
Successful result if VLR record for MS (a) has been erased andwhen the established MOC is cut.
MSISDN MS1(a/b)IMSI MS1 (a/b)
action:...........
HPLMN(a) personnel activates ODB for All Outgoing Calls andAll Incoming Calls when on Roaming for MS(a) from HLR eitherusing HLR’s Man-Machine Interface or via Administrative DataCentre (ADC) input to HLR.
Check VLR for record of MS(a).MSISDN of MS1 (a)IMSI MS1(a)
Comments
action:...........
MS1(a) establishes call to MS2(a).Call answered and held for one minute.Quality assessed.
expected result: ......
Successful result if call is established in 30 seconds, and call is stable in unanswered and answered phases, and there is no perceptible echo to either user, and call remains in intelligible/high quality conversation phase for one minute. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. This test will also confirm the correct delivery of CLI information (or lack thereof) in a roaming scenario.
IMSI MS1(a)Number keyed into MS1 (a)IMSI MS2(a)
Chargeable Call Duration (i.e. perceived answer until end of call. Duration must be 60sec or more.)
(j) Comments
action:...........
PSTN telephone(b2) calls MS1(a).If call is successfully established, then maintain answered call for one minute. Assess quality.If call attempt returns "System Failure" message, then make MS1(a) perform a location update, and repeat this test case.
expected result: ......
Successful result if either first call-attempt is established or "System Failure" message is returned within 30 seconds. In addition the answered call, whether establish on the first attempt or after the location update, has no perceptible echo to either user, and that an acceptable quality connection can be maintained. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. This test will also confirm the correct delivery of CLI information (or lack thereof) in a roaming scenario.
Number of MS1(a) dialled by PSTN telephone (b2)IMSI MS1(a)
Delay between dialing last digit of MSISDN of MS1(a) at PSTN telephone(b2) and MS1(a) alerting
Chargeable Call Duration (i.e. perceived answer until end of call. Duration must be 60sec or more.)
Comments
action:...........
Check that the subscriber is detached in the VLR, if possible.Attempt a call from PSTN telephone(b2) to MS1(a)
expected result: ......
Number of MS1(a) dialled by PSTN telephone (b2)IMSI MS1(a) (hrs:mins:secs)
Comments
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 19(34) document.xls
A 2.1.6
Does HPLMN(a) and PLMN(b) support Pre-Paging? [Yes/No]
[Yes/No]
Which test case was executed? [A (Paging) / B (Pre-paging)]Directory Number of calling PSTN telephone(b2) PSTN (b2) from no. I23 (regular A-Pty)
Number dialled by PSTN telephone(b2) e.g. MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info InfoIMSI MS1 (a) f.A1.2 I17
Time of start of call (i.e. last digit dialled) (hrs:mins:secs) 1 0Time of start of "not reachable" announcement (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 2 0
Chargeable Call Duration (i.e. perceived answer until end of call) secs 0:00:00
Language of announcement
Text of announcement
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.2 Supplementary Service Test Cases
A 2.2.1 Barring Of All Outgoing Calls BAOC]
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16IMSI MS1 (a) f.A1.2 I17 Info Info
Time of activation of BAOC (hrs:mins:secs) 1 0Emergency code keyed [i.e.112] ? EMCTime of start of emergency call (i.e. SEND key operation) (hrs:mins:secs) 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 2 0
Chargeable Call Duration (i.e. perceived answer until end of call) secs 0:00:00
Emergency Call successful? [Yes/No] 2 0
PSTN (b) number keyed (enter number in international format) PSTN (b2) from no. I23 (regular A-Pty)
PSTN (b) call successful? [Yes/No]Time of deactivation of BAOC (hrs:mins:secs) 2 0
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.2.2 Barring Of Outgoing International Calls [BOIC]
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16IMSI MS1 (a) f.A1.2 I17 Info Info Info Info
Time of activation of BAIC (hrs:mins:secs) 2 0Operator Service number or PSTN (b) number keyed PSTN (b2) from no. I23 (regular A-Pty) Alert TimeTime of start of national PSTN call (i.e. SEND key operation) (hrs:mins:secs) 0 3 2 -3
Delay between SEND key operation and MS(a) receiving alerting indication secs 0:00:00 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 2 0
Chargeable Call Duration (i.e. perceived answer until end of call) secs 0:00:00
Call routed to correct Operator position? [Yes/No]HPLMN PSTN (a) from field I24
Home PLMN Country call successful? [Yes/No]Time of deactivation of BOIC (hrs:mins:secs) 2 0
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.2.3 Barring Of Outgoing International Calls except To Home PLMN Country [BOICexHC]Check if the VPLMN does support the SS:BOICexHC. (YES/NO)
see below
GeneralMethod of Supplementary Service Configuration [MS User/HLR operator]Does the switch support the SS: BOICexHC? [Yes/No]
MSISDN MS1 (a) f.A1.2 I16IMSI MS1 (a) f.A1.2 I17
PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Is Not Able To Respond To Paging or Pre-Paging (Battery off)action:...........
Disable MS(a) so that it is unable to respond to paging [Note MS(a) must not send IMSI Detach message, while being disabled]. Check that the subscriber is attached in the VLR, if possible.Immediately attempt a call from PSTN telephone(b2) to MS1(a)
Disable MS(a) so that it is unable to respond to pre-paging [Note MS(a) must not send IMSI Detach message, while being disabled]. Check that the subscriber is attached in the VLR, if possible.Immediately attempt a call from PSTN telephone(b1) to MS1(a)
expected result: ......
Successful result if PSTN telephone(b2) receives an announcement in the language of PLMN(b) that MS1(a) cannot be reached.
Successful result if PSTN telephone(b1) receives an announcement in the language of HPLMN(a) that MS1(a) cannot be reached.
Does HPLMN(a) sets a “Pre-paging supported” parameter in MAP_SEND_ROUTING_INFORMATION and MAP_PROVIDE_ROAMING_NUMBER?
IMSI MS1(a)
Comments
action:...........
(i) MS(a) attempts Emergency Call [112 keyed on MS](ii) MS(a) attempts call to PSTN.
expected result: ......
Successful result if call "i" succeeds and call "ii" fails.(i) MS(a) attempts Emergency Call [112 keyed on MS](ii) MS(a) attempts call to PSTN.
IMSI MS1(a)
Comments
action:...........
(i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which uses a signaling system to obtain the identity of the Calling Party](ii) MS(a) attempts outgoing call to Home PLMN Country.
expected result: ......
Successful result if call "i" succeeds and call "ii" fails.(i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which uses a signaling system to obtain the identity of the Calling Party](ii) MS(a) attempts outgoing call to Home PLMN Country.
IMSI MS1(a)
Home PLMN Country number keyed (enter number in international format +CC)
Comments
action:...........
expected result: ......
MSISDN MS1(a) IMSI MS1(a)
Split into different cases if VPLMN(b) (i.e.) 2.2.3.1) supports the SS:BOICexHC. or(i.e.) 2.2.3.2) does not support the SS:BOICexHC.The test case result box is only entered once !
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 20(34) document.xls
A.2.2.3.1 Activated Service is BOICexHC (VPLMN supports SS: BOICexHC)
Successful result if calls of test cases "i" and "ii" succeeds, and the call of test case "iii" fails.
Info InfoTime of activation of BOICexHC 3A.1) (i) Call to Home-PSTN-telephone(a):Home PSTN (a) Country number keyed HPLMN PSTN (a) from field I24Time of start of Home PSTN Country call (i.e. SEND key operation) (hrs:mins:secs) 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 5 0
Home PSTN Country call Chargeable Call Duration (i.e. perceived answer until end of call) secs 0:00:00
A.2) (ii) Call to country where the MS is presently located:PSTN (b2) number of the country keyed, where MS(a) is presently located PSTN (b2) from no. I23 (regular A-Pty)Time of start of call within the country where the MS(a) is presently located (i.e. SEND key operation) (hrs:mins:secs) 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 5 0
Chargeable Call Duration (i.e. perceived answer until end of call) secs 0:00:00
A.3) (iii) International Call, not to Home PLMN country and not to country where the MS is presently located:
[Yes/No]Time of deactivation of BOICexHC 8 0
A.2.2.3.2 Activated Service is BOICexHC (VPLMN does not support SS: BOICexHC):
Successful result, if the call (i) succeeds and call (ii) fails.
Time of activation of BOICexHC 3B.1) (i) Call to country where the MS is presently located:PSTN (b) number of the country keyed, where MS(a) is presently located PSTN (b2) from no. I23 (regular A-Pty)Time of start of national PSTN call (i.e. SEND key operation) (hrs:mins:secs) 1 0 1899/12/30 11:24:50Time of perceived answer of call (hrs:mins:secs) 1 0 1899/12/30 11:24:55Time of end of call (hrs:mins:secs) 5 0
PSTN Chargeable Call Duration (i.e. perceived answer until end of call) secs 0:00:00
B.2) (ii) Call to Home-PSTN-telephone(a):Home PSTN (a) Country number keyed HPLMN PSTN (a) from field I24Home PSTN Country call successful? [Yes/No]Time of deactivation of BOICexHC 3 0Results of this test case and comments:
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.2.4 Barring Of All Incoming Calls (BAIC / BAICroaming)
Successful result, if calls fail Successful result, if calls fail
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info Info Info InfoIMSI MS1 (a) f.A1.2 I17
Time of activation of [BAIC / BAICroaming] (hrs:mins:secs) 3 0PSTN (b) number to call PSTN (b2) from no. I23 (regular A-Pty)Number keyed by PSTN MSISDN MS1 (a) f.A1.2 I16Call successful? [Yes/No]Time of deactivation of [BAIC/BAICroaming] (hrs:mins:secs) 2 0
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.2.5Call Forwarding on Not Reachable (CFNRC -Before IMSI Detach TAKE BATTERY OFF WHILE PHONE IS SWITCHED ON)
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info Info Info InfoIMSI MS1 (a) f.A1.2 I17
Time of activation of CFNRc (hrs:mins:secs) 3 0Directory Number (i.e. DN) of calling PSTN telephone(b2) PSTN (b2) from no. I23 (regular A-Pty)
PSTN (b1) from no. I22 used for CFx Alert TimeTime of start of call (hrs:mins:secs) 0 3 2 -3
sec 0:00:00 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 2 0Chargeable Call Duration (i.e. perceived answer until end of call) sec 0:00:00
[Yes/No]Language of announcement [If applicable]Text of announcement [If applicable]Quality of successful call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No]If Yes, to which party? [caller/called]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
action:...........
(i) MS(a) attempts an outgoing call to Home-PSTN-telephone(a).
(ii) MS(a) attempts a call to the country, where the MS is presently located by making use of the international number format.
(iii) MS(a) attempts an international call to any other country than mentioned in (i) or (ii). (International Format should be +CC ...)
expected result: ......
International (Non Home PLMN Country and non country where MS(a) is presently located) call successful?
action:...........
(i) MS(a) attempts a call to local PSTN.
(ii) MS(a) attempts outgoing call to Home PLMN country.
expected result: ......
Comments
action:...........
Preconditions: HLR no entry for Barring of all incoming calls when roaming in VPLMN.MS(a) in VPLMN (b) activates the SS: BAICroaming PSTN (b) calls MS(a)
Preconditions: HLR no entry for Barring of all incoming calls.
MS(a) in VPLMN (b) activates the SS: BAIC PSTN(b) calls MS(a)
expected result: ......
IMSI MS1(a)
Comments
action:...........
Disable MS(a1) so that it is unable to respond to paging [Note MS(a1) must not send IMSI Detach message, while being disabled. This can be achieved by removing the battery while the phone is switched on].Immediately attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN telephone(b1), MS(a2) or PSTN telephone(a).
expected result: ......
Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN(b2) may receive an announcement that the call is being forwarded.
IMSI MS1(a)
DN of forwarded - to - PSTN telephone(b1). Note 1
Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1) ringing Note 1
Was an announcement that call was - being - forwarded received by PSTN telephone(b2)?
Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used then choose PSTN telephone(a).
Comments
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 21(34) document.xls
A 2.2.6 Call Forwarding on Not Reachable (CFNRC -After IMSI Detach SWITCH THE PHONE OFF)
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16IMSI MS1 (a) f.A1.2 I17 Info Info Info Info
Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty)PSTN (b1) from no. I22 used for CFx Alert Time
Time of start of call (hrs:mins:secs) 0 3 2 -3
sec 0:00:00 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 2 0Chargeable Call Duration (i.e. perceived answer until end of call) sec 0:00:00
[Yes/No]Language of announcement [If applicable]Text of announcement [If applicable]Quality of successful call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No]If Yes, to which party? [caller/called]Time of deactivation of CFNRc (hrs:mins:secs) 4 0
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.2.7 Call Forwarding on Busy (CFB)
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info Info Info InfoIMSI MS1 (a) f.A1.2 I17
Time of activation of CFB (hrs:mins:secs) 3 0Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty)
PSTN (b1) from no. I22 used for CFxParty with which MS(a1) is in conversation [DN] to be filled by VPLMN
IMSI MS2 (a) f.A1.2 I19 Alert TimeTime of start of call (hrs:mins:secs) 0 3 2 -3
Sec 0:00:00 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 2 0Chargeable Call Duration (i.e. perceived answer until end of call) sec 0:00:00
[Yes/No]Language of announcement [If applicable]Text of announcement [If applicable]Quality of successful call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No]If Yes, to which party? [caller/called]Time of deactivation of CFB (hrs:mins:secs) 4 0
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
A 2.2.8 Call Forwarding on No Reply (CFNRY)
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info Info Info InfoIMSI MS1 (a) f.A1.2 I17
Time of activation of CFNRY (hrs:mins:secs) 2Display Receipt Time
Start Time of SS activity (i.e. SEND key operation) (hrs:mins:secs) 0 3 2 -3Delay between SEND key operation and receipt of Display information sec 0:00:00 1 0Information displayed on MS(a)?Does MS(a) displays correct status of the call forwarding service? [Yes/No]Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty)
PSTN (b1) from no. I22 used for CFx Alert TimeTime of start of call (hrs:mins:secs) 0 3 2 -3
sec 0:00:00 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 2 0Chargeable Call Duration (i.e. perceived answer until end of call) sec 0:00:00
[Yes/No]Language of announcement [If applicable]Text of announcement [If applicable]Quality of successful call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No]If Yes, to which party? [caller/called]Time of deactivation of CFNRY (hrs:mins:secs) 4 0
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
action:...........
Check that the subscriber MS(a1) is detached in the VLR, if possible.
Attempt a call from PSTN telephone(b2) to MS(a1).
expected result: ......
Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.
IMSI MS1(a)
Directory Number (DN) of PSTN telephone (b1) Note 1
Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1) ringing. Note 1
Was an announcement that call was - being - forwarded received by PSTN telephone(b2)?
Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used then choose PSTN telephone(a).
Comments
action:...........
MS (a1) is in conversation state.If used, MS(a2) is attached.
Attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN(b1), MS(a2) or PSTN(a).
expected result: ......
Successful result if indicate the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.
IMSI MS1(a)
Directory Number (DN) of PSTN telephone (b1) Note 1
IMSI MS2(a)
Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1) ringing. Note 1
Was an announcement that call was - being - forwarded received by PSTN telephone(b2)?
Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used then choose PSTN telephone(a).
Comments
action:...........
MS(a) initiates an “Interrogate Call Forward Information”. MS(a) displays information. Attempt a call from PSTN telephone(b2) to MS(a1). After a period of time during which MS(a1) "rings", call is diverted to PSTN(b1), MS(a2) or PSTN(a) where it is answered.
expected result: ......
Successful result if MS(a) displays equivalent information to that stored in HLR and if MS(a1) "rings" for length of time equal to "No Reply Timeout" value stored in HLR, and call is completed to PSTN(b1), MS(a2) or PSTN(a), and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.
IMSI MS1(a)
Interrogate Supplementary Service at MS(a) by pressing *#61#
Directory Number (DN) of PSTN telephone (b1) Note 1
Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1) ringing. Note 1
Was an announcement that call was - being - forwarded received by PSTN telephone(b2)?
Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used then choose PSTN telephone(a).
Comments
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 22(34) document.xls
A 2.3 SMS Test CasesA 2.3.1 Mobile ORIGINATED and Terminated Short Message Service (SMS-MO)
Successful result if Short Message is correctly delivered within [2] minutes of switching MS2(a) on.
MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 Info InfoIMSI MS1 (a) f.A1.2 I17
E164 address of HPLMN SMS – Service CentreTime of transmitting to SMS - Service Centre (hrs:mins:secs) 3 0MSISDN MS2(a) MSISDN MS2 (a) f.A1.2 I18
IMSI MS2 (a) f.A1.2 I19Time of switching on MS2(a) (hrs:mins:secs) 1 0Time of receipt of SMS at MS2(a) (hrs:mins:secs) 1 0Was message correctly received? [Yes/No]
[Yes/No]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
2.4 SMS Interworking Test Cases
This appendix gives a template and a description of the different cases for SMS IW tests.
2.4.1 Basic Test Results
The numbering of the test result sections within this appendix is identical to the associated Test case from section 2 of the main document.2.4.1 Location Update by MS(a) in PLMN(b)
VLR Record contents:
MSISDN e.g. MS1(a) MSISDN MS1 (a) f.A1.2 I16IMSI IMSI MS1 (a) f.A1.2 I17TeleservicesSpeech [Y=Yes/N=No]SMS MO [Y/N]SMS MT [Y/N]Fax [Y/N]Bearer Services:(DCDA300 - 4800)Supplementary ServicesBAOC [Y/N]BOIC [Y/N]BOICexHC [Y/N]CFB [Y/N] C NumberCFNRy [Y/N] C NumberCFNRc [Y/N] C NumberCW [Y/N]CH [Y/N]MPTY [Y/N]AOCC [Y/N]AOCI [Y/N]Others:( CFU, CLIP-N, CLIR-TR, HOLD )HLR E164 AddressComments
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
2.4.2 SMS Test Results in case (WITH ROAMING AGREEMENT), Details of the test C.2.4.2.1
2.4.2.1 Mobile(a) in PLMN(b) to Mobile(b) in PLMN(b) no test setup- see pictures in General, no link
no result, no link
MSISDN -MS1 (a) MSISDN MS1 (a) f.A1.2 I16IMSI - MS1 (a) IMSI MS1 (a) f.A1.2 I17 Info InfoE164 address of HPLMN SMS – Service CentreTime of initial transmitting by Service Centre (hrs:mins:secs) 3 0
MSISDN MS2 (b) f.A1.2 I20 used for SMS-IWIMSI MS2 (b) f.A1.2 I21 used for SMS-IW
Time of switching on MS2(b) (hrs:mins:secs) 1 0Time of receipt of SMS at MS2(b) (hrs:mins:secs) 1 0Was message correctly received? [Yes/No]
[Yes/No]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
2.4.2.2 Mobile(b) in PLMN(b) to Mobile(a) in PLMN(b)no test setup- see pictures in General, no link
no result, no link
MSISDN MS2 (b) f.A1.2 I20 used for SMS-IWIMSI MS2 (b) f.A1.2 I21 used for SMS-IW Info Info
E164 address of VPLMN SMS – Service CentreTime of initial transmitting by Service Centre (hrs:mins:secs) 3 0MSISDN -MS1 (a) MSISDN MS1 (a) f.A1.2 I16IMSI - MS1 (a) IMSI MS1 (a) f.A1.2 I17Time of switching on MS1 (a) (hrs:mins:secs) 1 0Time of receipt of SMS at MS1 (a) (hrs:mins:secs) 1 0Was message correctly received? [Yes/No]
[Yes/No]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
action:...........
Switch on MS1(a). Switch off MS2(a).
Use MS1(a) to transmit a 160 character Short Message to MS2(a) via the Home Country SMS - Service Centre with Message Waiting priority selected.
Switch on MS2(a)
expected result: ......
IMSI MS1(a)
IMSI MS2(a)
If the message was not received, repeat test with MS2(a) switched on. Was message correctly received this time? Comments
action:...........
expected result: ......
MSISDN -MS2 (b)IMSI - MS2 (b)
If the message was not received, repeat test with MS2(b) switched on. Was message correctly received this time?
Comments
action:...........
expected result: ......
MSISDN -MS2 (b)IMSI - MS2 (b)
If the message was not received, repeat test with MS2(b) switched on. Was message correctly received this time?
Comments
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 23(34) document.xls
2.4.3 Test Results in case of NO ROAMING AGREEMENT
2.4.3.1 Mobile (b) in PLMN (b) to Mobile (a) in PLMN (a) no test setup- see pictures in General, no link
MSISDN MS2 (b) f.A1.2 I20 used for SMS-IWIMSI MS2 (b) f.A1.2 I21 used for SMS-IW Info Info
E164 address of VPLMN SMS – Service CentreTime of initial transmitting by Service Centre (hrs:mins:secs) 3 0MSISDN -MS1 (a) MSISDN MS1 (a) f.A1.2 I16IMSI - MS1 (a) IMSI MS1 (a) f.A1.2 I17Time of switching on MS1 (a) (hrs:mins:secs) 1 0Time of receipt of SMS at MS1 (a) (hrs:mins:secs) 1 0Was message correctly received? [Yes/No]
[Yes/No]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
2.4.3.2 Mobile (a) in PLM (a) to Mobile (b) in PLMN (b) no test setup- see pictures in General, no link
MSISDN -MS2 (a) MSISDN MS2 (a) f.A1.2 I18IMSI - MS2 (a) IMSI MS2 (a) f.A1.2 I19 Info InfoE164 address of HPLMN SMS – Service CentreTime of initial transmitting by Service Centre (hrs:mins:secs) 3 0
Time of switching on MS1 (b) (hrs:mins:secs) 1 0Time of receipt of SMS at MS1 (b) (hrs:mins:secs) 1 0Was message correctly received? [Yes/No]
[Yes/No]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
19.1 G S M A - SPECIFIC TESTS
19.1.1 E-UTRAN Combined Attach by MS(a) in VPLMN(b)
MSISDN -MS1 MSISDN MS1 (a) f.A1.2 I16IMSI - MS1 IMSI MS1 (a) f.A1.2 I17Time of switching on MS(a) (hrs:mins:secs) 1 0Is VLR record identical to the pre-testing information supplied by PLMN(a)? [Yes/No]Is MME record identical to the pre-testing information supplied by PLMN(a)? [Yes/No]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
19.2.1 CS Fallback Mobile Originated Voice Call - MS1(a) Calls MS2(a), Both Roamed In VPLMN(b)
Successful result if call is established.
MSISDN -MS1(a) MSISDN MS1 (a) f.A1.2 I16IMSI - MS1(a) IMSI MS1 (a) f.A1.2 I17MSISDN - MS2(a) MSISDN MS2 (a) f.A1.2 I18IMSI - MS2(a) IMSI MS2 (a) f.A1.2 I19Number keyed into MS1(a) MSISDN MS2 (a) f.A1.2 I18Time of start of call (i.e. SEND key operation) (hrs:mins:secs) 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 1 0Chargeable Call Duration (i.e. perceived answer until end of call.) sec 0:00:00
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
action:...........
expected result: ......
MSISDN -MS2 (b)IMSI - MS2 (b)
If the message was not received, repeat test with MS2(b) switched on. Was message correctly received this time?
Comments
action:...........
expected result: ......
MSISDN -MS1 (b)IMSI - MS1 (b)
If the message was not received, repeat test with MS2(b) switched on. Was message correctly received this time?
Comments
action:...........
Power-up MS1(a) and perform Combined Attach procedure on VPLMN(b)'s LTECheck MME/VLR record for the IMSI/MSISDN of MS1.
expected result: ......
Successful result if VLR/MME record is identical to the pre-testing information supplied by PLMN(a).Unsuccessful result if any of the CS Fallback / SMS over SGs services tested by this document or all of the information is missing.
Comments
action:...........
MS1(a) establishes call to MS2(a).Call answered.
expected result: ......
Comments
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 24(34) document.xls
19.3.1 CS Fallback Mobile Terminated Voice Call - MS2(a) Calls MS1(a), Both Roamed In VPLMN(b)
Successful result if call is established.
MSISDN -MS1(a) MSISDN MS1 (a) f.A1.2 I16IMSI - MS1(a) IMSI MS1 (a) f.A1.2 I17MSISDN - MS2(a) MSISDN MS2 (a) f.A1.2 I18IMSI - MS2(a) IMSI MS2 (a) f.A1.2 I19Number Keyed into MS2(a) MSISDN MS1 (a) f.A1.2 I16Time of start of call (i.e. SEND key operation) (hrs:mins:secs) 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 1 0Chargeable Call Duration (i.e. perceived answer until end of call.) sec 0:00:00
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
19.4.1 SMS over SGs (Mobile Originated and Mobile Terminated)
Successful result if Short Message is correctly delivered within two (2) minutes of switching MS2(a) on.
MSISDN -MS1(a) MSISDN MS1 (a) f.A1.2 I16IMSI - MS1(a) IMSI MS1 (a) f.A1.2 I17MSISDN - MS2(a) MSISDN MS2 (a) f.A1.2 I18IMSI - MS2(a) IMSI MS2 (a) f.A1.2 I19Number keyed into MS1(a) MSISDN MS2 (a) f.A1.2 I18Time of SMS sent by MS1(a) (i.e. SEND key operation) (hrs:mins:secs) 1 0Time of receipt of SMS at MS2(a) (hrs:mins:secs) 1 0Duration for SMS (i.e. SEND until receipt) sec 0:00:00Was message correctly received? [Yes/No]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
19.5.1 1xRTT CS Pre-Registration by MS1(a) in VPLMN(b)
MSISDN -MS1 MSISDN MS1 (a) f.A1.2 I16IMSI - MS1 IMSI MS1 (a) f.A1.2 I17Time of switching on MS1(a) (hrs:mins:secs) 1 0Is 1xRTT MSC record identical to the pre-testing information supplied by PLMN(a)? [Yes/No]Is MME record identical to the pre-testing information supplied by PLMN(a)? [Yes/No]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
action:...........
MS2(a) establishes call to MS1(a).Call answered.
expected result: ......
Comments
action:...........
Switch on MS1(a) and MS2(a)Use MS1(a) to transmit a 160 character Short Message to MS2(a) via the Home Country SMS.Await delivery of Short Message to MS2(a) on LTECheck contents of Short Message with those transmitted.
expected result: ......
Comments
action:...........
Power-up MS1(a) and perform Initial Attach procedure and 1xRTT CS Pre-Registration procedure on VPLMN(b)'s LTECheck MME/1xRTT MSC record for the IMSI/MSISDN of MS1.
expected result: ......
Successful result if 1xRTT MSC record is identical to the pre-testing information supplied by PLMN(a).Unsuccessful result if any of the CS Fallback / SMS over S102 services tested by this document or all of the information is missing.
Comments
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 25(34) document.xls
19.6.1 1xRTT CS Fallback Mobile Originated Voice Call - MS1(a) Calls MS2(a), Both Roamed In VPLMN(b)
Successful result if call is established.
MSISDN -MS1(a) MSISDN MS1 (a) f.A1.2 I16IMSI - MS1(a) IMSI MS1 (a) f.A1.2 I17MSISDN - MS2(a) MSISDN MS2 (a) f.A1.2 I18IMSI - MS2(a) IMSI MS2 (a) f.A1.2 I19Number keyed into MS1(a) MSISDN MS2 (a) f.A1.2 I18Time of start of call (i.e. SEND key operation) (hrs:mins:secs) 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 1 0Chargeable Call Duration (i.e. perceived answer until end of call.) sec 0:00:00
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
19.7.1 1xRTT CS Fallback Mobile Terminated Voice Call - MS2(a) Calls MS1(a), Both Roamed In VPLMN(b)
Successful result if call is established.
MSISDN -MS1(a) MSISDN MS1 (a) f.A1.2 I16IMSI - MS1(a) IMSI MS1 (a) f.A1.2 I17MSISDN - MS2(a) MSISDN MS2 (a) f.A1.2 I18IMSI - MS2(a) IMSI MS2 (a) f.A1.2 I19Number keyed into MS2(a) MSISDN MS1 (a) f.A1.2 I16Time of start of call (i.e. SEND key operation) (hrs:mins:secs) 1 0Time of perceived answer of call (hrs:mins:secs) 1 0Time of end of call (hrs:mins:secs) 1 0Chargeable Call Duration (i.e. perceived answer until end of call.) sec 0:00:00
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
19.8.1 SMS over S102 (Mobile Originated and Mobile Terminated)
Successful result if Short Message is correctly delivered within two (2) minutes of switching MS2(a) on.
MSISDN -MS1(a) MSISDN MS1 (a) f.A1.2 I16IMSI - MS1(a) IMSI MS1 (a) f.A1.2 I17MSISDN - MS2(a) MSISDN MS2 (a) f.A1.2 I18IMSI - MS2(a) IMSI MS2 (a) f.A1.2 I19Number keyed into MS1(a) MSISDN MS2 (a) f.A1.2 I18Time of SMS sent by MS1(a) (i.e. SEND key operation) (hrs:mins:secs) 1 0Time of receipt of SMS at MS2(a) (hrs:mins:secs) 1 0Duration for SMS (i.e. SEND until receipt) sec 0:00:00Was message correctly received? [Yes/No]
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
action:...........
MS1(a) establishes call to MS2(a).Call answered.
expected result: ......
Comments
action:...........
MS2(a) establishes call to MS1(a).Call answered.
expected result: ......
Comments
action:...........
Switch on MS1(a) and MS2(a)Use MS1(a) to transmit a 160 character Short Message to MS2(a) via the Home Country SMS.Await delivery of Short Message to MS2(a) on LTECheck contents of Short Message with those transmitted.
expected result: ......
Comments
click Help forTime Macro
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 26(34) document.xls
19.9.1 G S M A -SPEC. TEST CASE HEADER 19.9.1 (not in use now)Detail Text 1 MS1(a/b) "action" MS2 (a/b) "action" MS3 (a/b) /9
Detail Text 3 (Result) 19.9.1
MSISDN -MS1IMSI - MS1MSISDN -MS2IMSI - MS2MSISDN -MS3 Info InfoIMSI - MS3
(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 6 0
sec 0:00:00sec 0:00:00sec 0:00:00
Free Space to define the test, the MSISDN /IMSI and TIME relevant fields must b econnected to TH TADIG sheet in advance
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
19.10.1 G S M A -SPEC. TEST CASE HEADER 19.10.1 (not in use now)Detail Text 1 MS1(a/b) "action" MS2 (a/b) "action" MS3 (a/b) /10
Detail Text 3 (Result) 19.10.1
MSISDN -MS1IMSI - MS1MSISDN -MS2IMSI - MS2MSISDN -MS3 Info InfoIMSI - MS3
(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 6 0
sec 0:00:00sec 0:00:00sec 0:00:00
Free Space to define the test, the MSISDN /IMSI and TIME relevant fields must b econnected to TH TADIG sheet in advance
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 Date
action:...........
expected result: ......
MS1 (a/b) Status request for various issue / time SEND KEYMS2 (a/b) Status request for various issue / time SEND KEYMS3 (a/b) Status request for various issue / time SEND KEYMS1 (a/b) Status request for various issue / time STARTMS2 (a/b) Status request for various issue / time STARTMS3 (a/b) Status request for various issue / time STARTMS1 (a/b) Status request for various issue / time ENDMS2 (a/b) Status request for various issue / time ENDMS3 (a/b) Status request for various issue / time ENDMS1 (a/b) DurationMS2 (a/b) DurationMS3 (a/b) Duration
Comments
action:...........
expected result: ......
MS1 (a/b) Status request for various issue / time SEND KEYMS2 (a/b) Status request for various issue / time SEND KEYMS3 (a/b) Status request for various issue / time SEND KEYMS1 (a/b) Status request for various issue / time STARTMS2 (a/b) Status request for various issue / time STARTMS3 (a/b) Status request for various issue / time STARTMS1 (a/b) Status request for various issue / time ENDMS2 (a/b) Status request for various issue / time ENDMS3 (a/b) Status request for various issue / time ENDMS1 (a/b) DurationMS2 (a/b) DurationMS3 (a/b) Duration
Comments
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 27(34) document.xls
20.1 O P E R A TO R Specific Tests
20.1.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.1.1
Detail Text 2 / Action- field in General TC 20.1.1
Detail Text 3 (Result) 20.1.1
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 DatePaste Test Case Below
20.2.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.2.1
Detail Text 2 / Action- field in General TC 20.2.1
Detail Text 3 (Result) 20.2.1
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 DatePaste Test Case Below
action:...........
expected result: ......
Test Case Comments
action:...........
expected result: ......
Test Case Comments
Click here to paste a Template page into this Test Case.
Click here to Clear Paste-contents.
Click here to paste a Template page into this Test Case.
Click here to Clear Paste-contents.
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 28(34) document.xls
20.3.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.3.1Detail Text 2 / Action- field in General TC 20.3.1
Detail Text 3 (Result) 20.3.1
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 DatePaste Test Case Below
20.4.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.4.1Detail Text 2 / Action- field in General TC 20.4.1
Detail Text 3 (Result) 20.4.1
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 DatePaste Test Case Below
action:...........
expected result: ......
Test Case Comments
action:...........
expected result: ......
Test Case Comments
Click here to paste a Template page into this Test Case.
Click here to Clear Paste-contents.
Click here to paste a Template page into this Test Case.
Click here to Clear Paste-contents.
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 29(34) document.xls
20.5.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.5.1
Detail Text 2 / Action- field in General TC 20.5.1
Detail Text 3 (Result) 20.5.1
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 DatePaste Test Case Below
20.6.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.6.1Detail Text 2 / Action- field in General TC 20.6.1
Detail Text 3 (Result) 20.6.1
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 DatePaste Test Case Below
action:...........
expected result: ......
Test Case Comments
action:...........
expected result: ......
Test Case Comments
Click here to paste a Template page into this Test Case.
Click here to Clear Paste-contents.
Click here to paste a Template page into this Test Case.
Click here to Clear Paste-contents.
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 30(34) document.xls
20.7.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.7.1Detail Text 2 / Action- field in General TC 20.7.1
Detail Text 3 (Result) 20.7.1
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 DatePaste Test Case Below
20.8.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.8.1Detail Text 2 / Action- field in General TC 20.8.1
Detail Text 3 (Result) 20.8.1
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 DatePaste Test Case Below
action:...........
expected result: ......
Test Case Comments
action:...........
expected result: ......
Test Case Comments
Click here to paste a Template page into this Test Case.
Click here to Clear Paste-contents.
Click here to paste a Template page into this Test Case.
Click here to Clear Paste-contents.
click Help forTime Macro
click Help forTime Macro
IR24 Test Cases 31(34) document.xls
20.9.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.9.1
Detail Text 2 / Action- field in General TC 20.9.1
Detail Text 3 (Result) 20.9.1
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 DatePaste Test Case Below
20.10.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.10.1
Detail Text 2 / Action- field in General TC 20.10.1
Detail Text 3 (Result) 20.10.1
Testcase Result [PASS / FAIL / NOT PERFORMED]
Signature of Tester TESTER NAME (b) > field in TEST CASE PAGE H31 DatePaste Test Case Below
End of Document
action:...........
expected result: ......
Test Case Comments
action:...........
expected result: ......
Test Case Comments
Click here to paste a Template page into this Test Case.
Click here to Clear Paste-contents.
Click here to paste a Template page into this Test Case.
Click here to Clear Paste-contents.
click Help forTime Macro
click Help forTime Macro
MS1 and MS2 templateReturn to IR24 Test Case Page Click to select this Operator Specific Test
VPLMN input requiredIMSI of MS1, if from HPLMN (a) VPLMN input requiredNumber keyed into MS1(a) VPLMN input required
VPLMN input requiredIMSI of MS2, if from HPLMN (a) VPLMN input requiredNumber keyed into MS2(a) VPLMN input required
VPLMN input required Info Info Info InfoVPLMN input required Alert Time
(hrs:mins:secs) 0 3 2 -3secs 0:00:00 1 0
(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0
(hrs:mins:secs) 1 0(hrs:mins:secs) 3 0
secs 0:00:00
secs 0:00:00
Echo present? [Yes/No]If Yes, to which MS (a/b)? [MS1(a/b) / MS2(a/b) / MS3(a/b)]
[Yes/No]
MS1 and MS3 template
Return to IR24 Test Case Page Click to select this Operator Specific Test
VPLMN input requiredIMSI of MS1, if from HPLMN (a) VPLMN input requiredNumber keyed into MS1(a) VPLMN input required
VPLMN input requiredIMSI of MS2, if from HPLMN (a) VPLMN input requiredNumber keyed into MS2(a) VPLMN input required
VPLMN input required Info Info Info InfoVPLMN input required Alert Time
(hrs:mins:secs) 0 3 2 -3secs 0:00:00 1 0
(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0
(hrs:mins:secs) 1 0(hrs:mins:secs) 3 0
secs 0:00:00secs 0:00:00
Echo present? [Yes/No]If Yes, to which MS (a/b)? [MS1(a/b) / MS2(a/b) / MS3(a/b)]
[Yes/No]
MS1, MS2 and MS3 template
Return to IR24 Test Case Page Click to select this Operator Specific Test
VPLMN input requiredIMSI of MS2, if from HPLMN (a) VPLMN input requiredNumber keyed into MS2(a) VPLMN input required
VPLMN input requiredVPLMN input required Info Info Info InfoVPLMN input required Alert Time
(hrs:mins:secs) 0 3 2 -3secs 0:00:00
(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0
(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 4 0
secs 0:00:00secs 0:00:00
secs 0:00:00
Echo present? [Yes/No]If Yes, to which MS (a/b)? [MS1(a/b) / MS2(a/b) / MS3(a/b)]
[Yes/No]
MSISDN of originating MS (i.e. MS1(a/b))
MSISDN of originating MS (i.e. MS2(a/b))
SMSC Addr. For MSISDN MS1(a/b))SMSC Addr. For MSISDN MS2(a/b))Time of start of call MS1 (a/b) (i.e. SEND key operation) Delay between SEND key operation at MS1(a/b) and MS2(a/b) alerting MS1 (a/b) Status request for various issue (e.g. balance in case of PREPAID)MS2 (a/b) Status request for various issue (e.g. balance in case of PREPAID)Time of start of call MS2 (a/b) (i.e. SEND key operation)Time of perceived answer of call at MS1 (a/b)Time of perceived answer of call at MS2 (a/b)MS1 (a/b) Status request for various issue / time ENDMS2 (a/b) Status request for various issue / time ENDChargeable Call Duration at MS1(a/b) = xxx sec or moreChargeable Call Duration at MS2(a/b) = xxx sec or moreMS1 (a/b) Status request for various issue (e.g. balance in case of PREPAID)MS2 (a/b) Status request for various issue (e.g. balance in case of PREPAID)Quality of call [Excellent, Good, Fair, Poor, Bad]
Is the MSISDN of MS1(a) displayed at MS2(a) in proper format?IF NO, what does MS2(a) display?
MSISDN of originating MS (i.e. MS1(a/b))
MSISDN of originating MS (i.e. MS3(a/b))
SMSC Addr. For MSISDN MS1(a/b))SMSC Addr. For MSISDN MS3(a/b))Time of start of call MS1 (a/b) (i.e. SEND key operation) Delay between SEND key operation at MS1(a/b) and MS3(a/b) alerting MS1 (a/b) Status request for various issue (e.g. balance in case of PREPAID)MS3 (a/b) Status request for various issue (e.g. balance in case of PREPAID)Time of start of call MS2 (a/b) (i.e. SEND key operation)Time of perceived answer of call at MS1 (a/b)Time of perceived answer of call at MS3 (a/b)MS1 (a/b) Status request for various issue / time ENDMS3 (a/b) Status request for various issue / time ENDChargeable Call Duration at MS1(a/b) = xxx sec or moreChargeable Call Duration at MS3(a/b) = xxx sec or moreMS1 (a/b) Status request for various issue (e.g. balance in case of PREPAID)MS3 (a/b) Status request for various issue (e.g. balance in case of PREPAID)Quality of call [Excellent, Good, Fair, Poor, Bad]
Is the MSISDN of MS1(a) displayed at MS3(a) in proper format?IF NO, what does MS3(a) display?
MSISDN of originating MS (i.e. MS2(a/b))
SMSC Addr. For MSISDN MS1(a/b))SMSC Addr. For MSISDN MS2(a/b))SMSC Addr. For MSISDN MS3(a/b))Time of start of call MS1 (a/b) (i.e. SEND key operation) Delay between SEND key operation at MS1(a/b) and MS2(a/b) alerting MS1 (a/b) Status request for varius issue (e.g. balance in case of PREPAID)MS2 (a/b) Status request for varius issue (e.g. balance in case of PREPAID)MS3 (a/b) Status request for varius issue (e.g. balance in case of PREPAID)Time of start of call MS2 (a/b) (i.e. SEND key operation)Time of perceived answer of call at MS1 (a/b)Time of perceived answer of call at MS2 (a/b)Time of perceived answer of call at MS3 (a/b)Time of start of call MS3 (a/b) (i.e. SEND key operation)MS1 (a/b) Status request for varius issue / time ENDMS2 (a/b) Status request for varius issue / time ENDMS3 (a/b) Status request for varius issue / time ENDChargeable Call Duration at MS1(a/b) = xxx sec or moreChargeable Call Duration at MS2(a/b) = xxx sec or moreChargeable Call Duration at MS3(a/b) = xxx sec or moreMS1 (a/b) Status request for varius issue (e.g. balance in case of PREPAID)MS2 (a/b) Status request for varius issue (e.g. balance in case of PREPAID)MS3 (a/b) Status request for varius issue (e.g. balance in case of PREPAID)Quality of call [Excellent, Good, Fair, Poor, Bad]
Is the MSISDN of MS1(a) displayed at MS2(a) in proper format?IF NO, what does MS2(a) display?
RestoreTestCase
RestoreTestCase
RestoreTestCase
MS2 and MS3 template
Return to IR24 Test Case Page Click to select this Operator Specific Test
VPLMN input requiredIMSI of MS1, if from HPLMN (a) VPLMN input requiredNumber keyed into MS1(a) VPLMN input required
VPLMN input requiredIMSI of MS2, if from HPLMN (a) VPLMN input requiredNumber keyed into MS2(a) VPLMN input required
VPLMN input requiredVPLMN input required Alert Time
(hrs:mins:secs) 0 3 2 -3secs 0:00:00 1 0
(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0(hrs:mins:secs) 1 0
(hrs:mins:secs) 1 0(hrs:mins:secs) 3 0
secs 0:00:00
secs 0:00:00
Echo present? [Yes/No]If Yes, to which MS (a/b)? [MS1(a/b) / MS2(a/b) / MS3(a/b)]
[Yes/No]
MSISDN of originating MS (i.e. MS2(a/b))
MSISDN of originating MS (i.e. MS3(a/b))
SMSC Addr. For MSISDN MS2(a/b))SMSC Addr. For MSISDN MS3(a/b))Time of start of call MS2 (a/b) (i.e. SEND key operation) Delay between SEND key operation at MS1(a/b) and MS3(a/b) alerting MS2 (a/b) Status request for various issue (e.g. balance in case of PREPAID)MS3 (a/b) Status request for various issue (e.g. balance in case of PREPAID)Time of start of call MS2 (a/b) (i.e. SEND key operation)Time of perceived answer of call at MS2 (a/b)Time of perceived answer of call at MS3 (a/b)MS2 (a/b) Status request for various issue / time ENDMS3 (a/b) Status request for various issue / time ENDChargeable Call Duration at MS2(a/b) = xxx sec or moreChargeable Call Duration at MS3(a/b) = xxx sec or moreMS2 (a/b) Status request for various issue (e.g. balance in case of PREPAID)MS3 (a/b) Status request for various issue (e.g. balance in case of PREPAID)Quality of call [Excellent, Good, Fair, Poor, Bad]
Is the MSISDN of MS2(a) displayed at MS3(a) in proper format?IF NO, what does MS3(a) display?
RestoreTestCase
IR24 TADIG-Input 34(34) document.xls
Y E SThe intention of this worksheet is to allow easy download of the IREG test results for TADIG testers. Y E STo this extent this page only provides results for tests where a CDR can be created in TAP. Y E SWhether or not that CDR is then created may also depend on the charging principles or network setup of the visited network. Y E SFor more information on the expected outcome on TAP please refer to GSM PRD TD.43 Y E S
Y E S-- IR.24 - please refer to GSM PRD TD.43 Y E S
Y E SSubscriber ID Y E S
Service Type MSISDN Startime of CDR APN StatusY E S
2.1.1 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A Y E S2.1.2A 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none N/A Y E S2.1.2B 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A Y E S
2.1.3 1 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S
2.1.3 2 MTC Voice MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 0:00:00 none N/A Y E S
2.1.4 1 MTC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S
2.1.5 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none N/A Y E S
2.1.6 1 None Expected MSISDN MS1 (a) f.A1.2 I16 missing yet none none none N/A Y E S2.2.1 1 MOC Emergency MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 ? EMC none N/A Y E S
2.2.2 1 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S2.2.3.1.A 1 SS BOIC-exHC MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S
2.2.3.1.A 2 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S
2.2.3.1.A 3 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S2.2.3.1.A 4 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A Y E S2.2.3.1.A 5 SS BOIC-exHC none IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S2.2.3.2.B 1 SS BOIC-exHC MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S
2.2.3.2.B 2 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S2.2.3.2.B 3 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A Y E S2.2.3.2.B 4 SS BOIC-exHC MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S2.2.4 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A Y E S2.2.5 1 SS CFNRc MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S
2.2.5 2 MTC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none N/A Y E S
2.2.5 3 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S
2.2.6 1 None Expected CFNRC MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none N/A Y E S2.2.7 1 SS CFB MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S
2.2.7 2 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none N/A Y E S
2.2.7 3 MTC Voice to be filled by VPLMN IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 none none N/A Y E S
2.2.7 4 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S2.2.7 5 SS CFB MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S
2.2.8 1 SS CFNRy MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S2.2.8 2 None Expected none none none none none none N/A Y E S
2.2.8 3 MTC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S
2.2.8 4 MOC Voice MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none N/A Y E S2.2.8 5 SS CFNRy MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S2.3.1 1 MOC SMS-MO MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S2.3.1 2 MTC SMS-MT MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 none none none N/A Y E S2.4.2.1 1 N/A SMS-MO MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S2.4.2.2 2 N/A SMS-MT MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S2.4.3.1 1 N/A SMS-MO MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S2.4.3.2 2 N/A SMS-MT MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 none none none N/A Y E SGSMA SPECIFIC Test Cases Y E S19.1.1 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A Y E S
19.2.1 1 MOC Voice (CSFB) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S
19.3.1 1 MTC Voice (CSFB) MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 0:00:00 none N/A Y E S19.4.1 1 N/A SMS-MO(SMSoSGs) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S19.4.1 2 N/A SMS-MT(SMSoSGs) MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 none none none N/A Y E S19.5.1 1 None Expected MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 none none none none N/A Y E S
19.6.1 1 MOC Voice (1xRTT CSFB) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S
19.7.1 1 MTC Voice (1xRTT CSFB) MSISDN MS2 (a) f.A1.2 I18 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 0:00:00 none N/A Y E S19.8.1 1 N/A SMS-MO(SMSoS102) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 1899/12/30 00:00:00 none none none N/A Y E S19.8.1 2 N/A SMS-MO(SMSoS102) MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 1899/12/30 00:00:00 none none none N/A Y E S
IREG Test Ref
Event Number
TAP CDR Type
Other (IMSI!)
ChargebleDURATION
Calling/Called Party
MSISDN MS2 (a) f.A1.2 I18MSISDN MS1 (a) f.A1.2 I16
PSTN (b2) from no. I23 (regular A-Pty)MSISDN MS1 (a) f.A1.2 I16MSISDN MS1 (a) f.A1.2 I16
PSTN (b2) from no. I23 (regular A-Pty)
HPLMN PSTN (a) from field I24
PSTN (b2) from no. I23 (regular A-Pty)
PSTN (b2) from no. I23 (regular A-Pty)
PSTN (b2) from no. I23 (regular A-Pty)
PSTN (b1) from no. I22 used for CFxMSISDN MS1 (a) f.A1.2 I16
to be filled by VPLMNMSISDN MS1 (a) f.A1.2 I16
PSTN (b1) from no. I22 used for CFx
PSTN (b2) from no. I23 (regular A-Pty)PSTN (b1) from no. I22 used for CFx
MSISDN MS2 (a) f.A1.2 I18MSISDN MS1 (a) f.A1.2 I16
MSISDN MS2 (a) f.A1.2 I18MSISDN MS1 (a) f.A1.2 I16
Create CSV file
IR24 General Page Setup Page Test Cases Page Templates Page InstructionsTadig Page